baseband-devel

baseband-devel@lists.osmocom.org

2023 discussions

AW: Facing issues in using OSMOCOM
by Andreas.Eversberg 15 Jun '11

15 Jun '11

mine is >50k. why am i not getting the same warning? > Well, that sounds like a pretty explicit warning ... maybe you should > try what it says.

3 2

Re: Facing issues in using OSMOCOM
by Basem Ahmed 15 Jun '11

15 Jun '11

B-Mobile Output: linux-d5zo:/home/basem/osmocom-bb/src/host/osmocon # ./osmocon -p /dev/ttyUSB0 -m c140xor ../../target/firmware/board/compal_e88/layer1.compalram.bin got 2 bytes from modem, data looks like: 04 81 ..got 5 bytes from modem, data looks like: 1b f6 02 00 41 ....Agot 1 bytes from modem, data looks like: 01 .got 1 bytes from modem, data looks like: 40 @Received PROMPT1 from phone, responding with CMD The filesize is larger than 15kb, code on the magic address will be overwritten!Use loader.bin and upload the application with osmoload instead! read_file(../../target/firmware/board/compal_e88/layer1.compalram.bin): file_size=54104, hdr_len=4, dnload_len=54111got 1 bytes from modem, data looks like: 1b .got 1 bytes from modem, data looks like: f6 .got 1 bytes from modem, data looks like: 02 .got 1 bytes from modem, data looks like: 00 .got 1 bytes from modem, data looks like: 41 Agot 1 bytes from modem, data looks like: 02 .got 1 bytes from modem, data looks like: 43 CReceived PROMPT2 from phone, starting downloadhandle_write(): 4096 bytes (4096/54111)handle_write(): 4096 bytes (8192/54111)handle_write(): 4096 bytes (12288/54111)handle_write(): 4096 bytes (16384/54111)handle_write(): 4096 bytes (20480/54111)handle_write(): 4096 bytes (24576/54111)handle_write(): 4096 bytes (28672/54111)handle_write(): 4096 bytes (32768/54111)handle_write(): 4096 bytes (36864/54111)handle_write(): 4096 bytes (40960/54111)handle_write(): 4096 bytes (45056/54111)handle_write(): 4096 bytes (49152/54111)handle_write(): 4096 bytes (53248/54111)handle_write(): 863 bytes (54111/54111)handle_write(): finishedgot 1 bytes from modem, data looks like: 1b .got 1 bytes from modem, data looks like: f6 .got 1 bytes from modem, data looks like: 02 .got 1 bytes from modem, data looks like: 00 .got 1 bytes from modem, data looks like: 41 Agot 1 bytes from modem, data looks like: 03 .got 1 bytes from modem, data looks like: 42 BReceived DOWNLOAD ACK from phone, your code is running now! OSMOCOM Layer 1 (revision osmocon_v0.0.0-906-g5589a6b-modified)======================================================================Device ID code: 0xb4fbDevice Version code: 0x0000ARM ID code: 0xfff3cDSP ID code: 0x0128Die ID code: e144263d880014fd======================================================================REG_DPLL=0x2413CNTL_ARM_CLK=0xf0a1CNTL_CLK=0xff91CNTL_RST=0xfff3CNTL_ARM_DIV=0xfff9======================================================================Power up simcard:Assert DSP into ResetReleasing DSP from ResetSetting some dsp_api.ndb valuesSetting API NDB parametersDSP Download Status: 0x0001DSP API Version: 0x0000 0x0000Finishing download phaseDSP Download Status: 0x0002DSP API Version: 0x3606 0x0000LOST 1203!SIM Request (7): a0 a4 00 00 02 3f 00 Status 2: 9F 23SIM Request (5): a0 c0 00 00 23 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 2f e2 Status 2: 9F 13SIM Request (5): a0 c0 00 00 13 Status 1: 90 00SIM Request (5): a0 b0 00 00 0a Status 1: 90 00SIM Request (7): a0 a4 00 00 02 7f 20 Status 2: 9F 23SIM Request (5): a0 c0 00 00 23 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 07 Status 2: 9F 13SIM Request (5): a0 c0 00 00 13 Status 1: 90 00SIM Request (5): a0 b0 00 00 09 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 7e Status 2: 9F 13SIM Request (5): a0 c0 00 00 13 Status 1: 90 00SIM Request (5): a0 b0 00 00 0b Status 1: 90 00SIM Request (7): a0 a4 00 00 02 3f 00 Status 2: 9F 23SIM Request (5): a0 c0 00 00 23 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 7f 10 Status 2: 9F 23SIM Request (5): a0 c0 00 00 23 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 40 Status 2: 9F 13SIM Request (5): a0 c0 00 00 13 Status 1: 90 00SIM Request (5): a0 b0 00 00 84 Status 1: 94 08SIM Request (7): a0 a4 00 00 02 3f 00 Status 2: 9F 23SIM Request (5): a0 c0 00 00 23 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 7f 20 Status 2: 9F 23SIM Request (5): a0 c0 00 00 23 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 20 Status 2: 9F 13SIM Request (5): a0 c0 00 00 13 Status 1: 90 00SIM Request (5): a0 b0 00 00 09 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 30 Status 2: 9F 13SIM Request (5): a0 c0 00 00 13 Status 1: 90 00SIM Request (5): a0 b0 00 00 3c Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 31 Status 2: 9F 13SIM Request (5): a0 c0 00 00 13 Status 1: 90 00SIM Request (5): a0 b0 00 00 01 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 46 Status 2: 9F 13SIM Request (5): a0 c0 00 00 13 Status 1: 90 00SIM Request (5): a0 b0 00 00 11 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 78 Status 2: 9F 13SIM Request (5): a0 c0 00 00 13 Status 1: 90 00SIM Request (5): a0 b0 00 00 02 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 7b Status 2: 9F 13SIM Request (5): a0 c0 00 00 13 Status 1: 90 00SIM Request (5): a0 b0 00 00 0c Status 1: 90 00L1CTL_RESET_REQ: FULL!L1CTL_PM_REQ start=100 end=104PM MEAS: ARFCN=100, 28 dBm at baseband, -109 dBm at RFPM MEAS: ARFCN=100, 30 dBm at baseband, -107 dBm at RFPM MEAS: ARFCN=101, 29 dBm at baseband, -108 dBm at RFPM MEAS: ARFCN=102, 26 dBm at baseband, -112 dBm at RFPM MEAS: ARFCN=103, 34 dBm at baseband, -104 dBm at RFPM MEAS: ARFCN=104, 25 dBm at baseband, -112 dBm at RFL1CTL_PM_REQ start=106 end=106PM MEAS: ARFCN=106, 26 dBm at baseband, -111 dBm at RFPM MEAS: ARFCN=106, 25 dBm at baseband, -112 dBm at RFL1CTL_PM_REQ start=108 end=110PM MEAS: ARFCN=108, 31 dBm at baseband, -106 dBm at RFPM MEAS: ARFCN=108, 30 dBm at baseband, -107 dBm at RFPM MEAS: ARFCN=109, 25 dBm at baseband, -112 dBm at RFPM MEAS: ARFCN=110, 24 dBm at baseband, -113 dBm at RFL1CTL_PM_REQ start=112 end=121PM MEAS: ARFCN=112, 28 dBm at baseband, -109 dBm at RFPM MEAS: ARFCN=112, 27 dBm at baseband, -110 dBm at RFPM MEAS: ARFCN=113, 32 dBm at baseband, -105 dBm at RFPM MEAS: ARFCN=114, 29 dBm at baseband, -108 dBm at RFPM MEAS: ARFCN=115, 29 dBm at baseband, -108 dBm at RFPM MEAS: ARFCN=116, 30 dBm at baseband, -107 dBm at RFPM MEAS: ARFCN=117, 31 dBm at baseband, -106 dBm at RFPM MEAS: ARFCN=118, 33 dBm at baseband, -104 dBm at RFPM MEAS: ARFCN=119, 29 dBm at baseband, -108 dBm at RFPM MEAS: ARFCN=120, 45 dBm at baseband, -92 dBm at RFPM MEAS: ARFCN=121, 65 dBm at baseband, -72 dBm at RFL1CTL_PM_REQ start=124 end=124PM MEAS: ARFCN=124, 29 dBm at baseband, -108 dBm at RFPM MEAS: ARFCN=124, 29 dBm at baseband, -108 dBm at RFL1CTL_PM_REQ start=762 end=762PM MEAS: ARFCN=762, 84 dBm at baseband, -54 dBm at RFPM MEAS: ARFCN=762, 84 dBm at baseband, -53 dBm at RFL1CTL_PM_REQ start=765 end=768PM MEAS: ARFCN=765, 41 dBm at baseband, -96 dBm at RFPM MEAS: ARFCN=765, 42 dBm at baseband, -95 dBm at RFPM MEAS: ARFCN=766, 38 dBm at baseband, -99 dBm at RFPM MEAS: ARFCN=767, 57 dBm at baseband, -80 dBm at RFPM MEAS: ARFCN=768, 46 dBm at baseband, -91 dBm at RFL1CTL_PM_REQ start=773 end=773PM MEAS: ARFCN=773, 33 dBm at baseband, -105 dBm at RFPM MEAS: ARFCN=773, 32 dBm at baseband, -105 dBm at RFL1CTL_PM_REQ start=775 end=776PM MEAS: ARFCN=775, 48 dBm at baseband, -89 dBm at RFPM MEAS: ARFCN=775, 48 dBm at baseband, -89 dBm at RFPM MEAS: ARFCN=776, 41 dBm at baseband, -96 dBm at RFL1CTL_PM_REQ start=779 end=779PM MEAS: ARFCN=779, 51 dBm at baseband, -86 dBm at RFPM MEAS: ARFCN=779, 52 dBm at baseband, -85 dBm at RFL1CTL_PM_REQ start=797 end=797PM MEAS: ARFCN=797, 29 dBm at baseband, -108 dBm at RFPM MEAS: ARFCN=797, 29 dBm at baseband, -108 dBm at RFL1CTL_PM_REQ start=816 end=816PM MEAS: ARFCN=816, 29 dBm at baseband, -108 dBm at RFPM MEAS: ARFCN=816, 28 dBm at baseband, -109 dBm at RFL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=762, flags=0x7)Starting FCCH RecognitionFB0 (1419:2): TOA= 1968, Power= -54dBm, Angle= 6913HzFB1 (1429:8): TOA= 9431, Power= -53dBm, Angle= 858Hz fn_offset=1428 (fn=1429 + attempt=8 + ntdma = 7)m delay=9 (fn_offset=1428 + 11 - fn=1429 - 1 scheduling next FB/SB detection task with delay 9FB1 (1440:1): TOA= 683, Power= -53dBm, Angle= 165Hz fn_offset=1439 (fn=1440 + attempt=1 + ntdma = 0)m delay=9 (fn_offset=1439 + 11 - fn=1440 - 1 scheduling next FB/SB detection task with delay 9=>FB @ FNR 1439 fn_offset=1439 qbits=2548Synchronize_TDMALOST 2859!SB1 (2891:1): TOA= 23, Power= -53dBm, Angle= 135Hz=> SB 0x01e4ab7f: BSIC=31 fn=2492177(1879/25/11) qbits=0Synchronize_TDMA=>FB @ FNR 2890 fn_offset=2492177 qbits=4908LOST 1903!L1CTL_RESET_REQ: FULL!EMPTYL1CTL_FBSB_REQ (arfcn=762, flags=0x7)Starting FCCH RecognitionFB0 (2492554:3): TOA= 2544, Power= -54dBm, Angle= 6840HzL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=762, flags=0x7)Starting FCCH RecognitionFB0 (2492575:9): TOA= 9312, Power= -54dBm, Angle= 6777HzFB1 (2492585:8): TOA= 8755, Power= -53dBm, Angle= 1051Hz fn_offset=2492583 (fn=2492585 + attempt=8 + ntdma = 6)m delay=8 (fn_offset=2492583 + 11 - fn=2492585 - 1 scheduling next FB/SB detection task with delay 8FB1 (2492605:11): TOA=12503, Power= -53dBm, Angle= 160Hz fn_offset=2492603 (fn=2492605 + attempt=11 + ntdma = 9)m delay=8 (fn_offset=2492603 + 11 - fn=2492605 - 1 scheduling next FB/SB detection task with delay 8=> DSP reports FB in bit that is 1179237253 bits in the future?!?Synchronize_TDMALOST 3714!SB1 (2269562:1): TOA= 29, Power= -53dBm, Angle= 9Hz=> SB 0x00d6ab7f: BSIC=31 fn=2492615(1879/21/41)=> DSP reports SB in bit that is 1458016052 bits in the future?!?Synchronize_TDMA=> DSP reports FB in bit that is 1458016029 bits in the future?!?LOST 1912! Configuration for both : OsmocomBB# show runnOsmocomBB# show running-config Current configuration:!!line vty no login!gps device /dev/ttyACM0gps baudrate defaultno gps enable!ms 1 layer2-socket /tmp/osmocom_l2 sap-socket /tmp/osmocom_sap sim reader network-selection-mode auto imei 000000000000000 0 imei-fixed no emergency-imsi no call-waiting no auto-answer no clip no clir tx-power auto no simulated-delay no stick location-updating codec full-speed prefer codec half-speed no abbrev support sms a5/1 a5/2 p-gsm e-gsm r-gsm no gsm-850 dcs no pcs class-900 4 class-850 4 class-dcs 1 class-pcs 1 channel-capability sdcch+tchf+tchh full-speech-v1 full-speech-v2 half-speech-v1 min-rxlev -106 dsc-max 90 exit test-sim imsi 001010000000000 ki xor 00 00 00 00 00 00 00 00 00 00 00 00 no barred-access no rplmn hplmn-search foreign-country exit no shutdownexit!endOsmocomBB# Connection closed by foreign host. Dear Andreas , Good day Sir , Actually i have two experiments for mobile project using Motorola C139 one with compal_e88 and the other with compal_e86 and here is the out put for both : First using compal E86: A- Layer 1 output: linux-d5zo:/home/basem/osmocom-bb/src/host/osmocon # ./osmocon -p /dev/ttyUSB0 -m c140xor ../../target/firmware/board/compal_e86/layer1.compalram.bin got 2 bytes from modem, data looks like: 04 81 ..got 5 bytes from modem, data looks like: 1b f6 02 00 41 ....Agot 1 bytes from modem, data looks like: 01 .got 1 bytes from modem, data looks like: 40 @Received PROMPT1 from phone, responding with CMD The filesize is larger than 15kb, code on the magic address will be overwritten!Use loader.bin and upload the application with osmoload instead! read_file(../../target/firmware/board/compal_e86/layer1.compalram.bin): file_size=54736, hdr_len=4, dnload_len=54743got 1 bytes from modem, data looks like: 1b .got 1 bytes from modem, data looks like: f6 .got 1 bytes from modem, data looks like: 02 .got 1 bytes from modem, data looks like: 00 .got 1 bytes from modem, data looks like: 41 Agot 1 bytes from modem, data looks like: 02 .got 1 bytes from modem, data looks like: 43 CReceived PROMPT2 from phone, starting downloadhandle_write(): 4096 bytes (4096/54743)handle_write(): 4096 bytes (8192/54743)handle_write(): 4096 bytes (12288/54743)handle_write(): 4096 bytes (16384/54743)handle_write(): 4096 bytes (20480/54743)handle_write(): 4096 bytes (24576/54743)handle_write(): 4096 bytes (28672/54743)handle_write(): 4096 bytes (32768/54743)handle_write(): 4096 bytes (36864/54743)handle_write(): 4096 bytes (40960/54743)handle_write(): 4096 bytes (45056/54743)handle_write(): 4096 bytes (49152/54743)handle_write(): 4096 bytes (53248/54743)handle_write(): 1495 bytes (54743/54743)handle_write(): finishedgot 1 bytes from modem, data looks like: 1b .got 1 bytes from modem, data looks like: f6 .got 1 bytes from modem, data looks like: 02 .got 1 bytes from modem, data looks like: 00 .got 1 bytes from modem, data looks like: 41 Agot 1 bytes from modem, data looks like: 03 .got 1 bytes from modem, data looks like: 42 BReceived DOWNLOAD ACK from phone, your code is running now! OSMOCOM Layer 1 (revision osmocon_v0.0.0-906-g5589a6b-modified)======================================================================Device ID code: 0xb4fbDevice Version code: 0x0000ARM ID code: 0xfff3cDSP ID code: 0x0128Die ID code: e144263d880014fd======================================================================REG_DPLL=0x2413CNTL_ARM_CLK=0xf0a1CNTL_CLK=0xff91CNTL_RST=0xfff3CNTL_ARM_DIV=0xfff9======================================================================Power up simcard:Assert DSP into ResetReleasing DSP from ResetSetting some dsp_api.ndb valuesSetting API NDB parametersDSP Download Status: 0x0001DSP API Version: 0x0000 0x0000Finishing download phaseDSP Download Status: 0x0002DSP API Version: 0x3606 0x0000LOST 346!SIM Request (7): a0 a4 00 00 02 3f 00 Status 2: 9F 22SIM Request (5): a0 c0 00 00 22 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 2f e2 Status 2: 9F 0FSIM Request (5): a0 c0 00 00 0f Status 1: 90 00SIM Request (5): a0 b0 00 00 0a Status 1: 90 00SIM Request (7): a0 a4 00 00 02 7f 20 Status 2: 9F 22SIM Request (5): a0 c0 00 00 22 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 07 Status 2: 9F 0FSIM Request (5): a0 c0 00 00 0f Status 1: 90 00SIM Request (5): a0 b0 00 00 09 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 7e Status 2: 9F 0FSIM Request (5): a0 c0 00 00 0f Status 1: 90 00SIM Request (5): a0 b0 00 00 0b Status 1: 90 00SIM Request (7): a0 a4 00 00 02 3f 00 Status 2: 9F 22SIM Request (5): a0 c0 00 00 22 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 7f 10 Status 2: 9F 22SIM Request (5): a0 c0 00 00 22 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 40 Status 2: 9F 0FSIM Request (5): a0 c0 00 00 0f Status 1: 90 00SIM Request (5): a0 b0 00 00 1c Status 1: 94 08SIM Request (7): a0 a4 00 00 02 3f 00 Status 2: 9F 22SIM Request (5): a0 c0 00 00 22 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 7f 20 Status 2: 9F 22SIM Request (5): a0 c0 00 00 22 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 20 Status 2: 9F 0FSIM Request (5): a0 c0 00 00 0f Status 1: 90 00SIM Request (5): a0 b0 00 00 09 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 30 Status 2: 9F 0FSIM Request (5): a0 c0 00 00 0f Status 1: 90 00SIM Request (5): a0 b0 00 00 2c Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 31 Status 2: 9F 0FSIM Request (5): a0 c0 00 00 0f Status 1: 90 00SIM Request (5): a0 b0 00 00 01 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 46 Status 2: 9F 0FSIM Request (5): a0 c0 00 00 0f Status 1: 90 00SIM Request (5): a0 b0 00 00 11 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 78 Status 2: 9F 0FSIM Request (5): a0 c0 00 00 0f Status 1: 90 00SIM Request (5): a0 b0 00 00 02 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 7b Status 2: 9F 0FSIM Request (5): a0 c0 00 00 0f Status 1: 90 00SIM Request (5): a0 b0 00 00 1e Status 1: 90 00 B-Mobile Output: linux-d5zo:/home/basem/osmocom-bb/src/host/layer23/src/mobile # ./mobile -i 127.0.0.1Copyright (C) 2008-2010 ...Contributions by ... License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl.html>This is free software: you are free to change and redistribute it.There is NO WARRANTY, to the extent permitted by law. <000e> sim.c:1206 init SIM client<0005> gsm48_cc.c:61 init Call Control<0001> gsm48_rr.c:5052 init Radio Ressource process<0004> gsm48_mm.c:1239 init Mobility Management process<0004> gsm48_mm.c:990 Selecting PLMN SEARCH state, because no SIM.<0002> gsm322.c:3556 init PLMN process<0003> gsm322.c:3557 init Cell Selection process<0003> gsm322.c:3614 Read stored BA list (mcc=420 mnc=01 Saudi Arabia, Al Jawal)Mobile '1' initialized, please start phone now!VTY available on port 4247.<0004> subscriber.c:556 Requesting SIM file 0x2fe2<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:697 go MF<000e> sim.c:241 SELECT (file=0x3f00)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x22)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=34)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=34 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:241 SELECT (file=0x2fe2)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=15)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=10)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=10 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:229 received ICCID 89966321051209484485 from SIM<0004> subscriber.c:556 Requesting SIM file 0x6f07<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:706 requested path is longer, go child DFgsm<000e> sim.c:241 SELECT (file=0x7f20)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x22)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=34)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=34 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:241 SELECT (file=0x6f07)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=15)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=9)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=9 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:259 received IMSI 420032210948448 from SIM<0004> subscriber.c:556 Requesting SIM file 0x6f7e<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:241 SELECT (file=0x6f7e)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=15)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=11)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=11 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:295 received LOCI from SIM (mcc=420 mnc=03 lac=0x0529 U1)<0004> subscriber.c:556 Requesting SIM file 0x6f40<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:697 go MF<000e> sim.c:241 SELECT (file=0x3f00)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x22)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=34)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=34 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:706 requested path is longer, go child DFtelecom<000e> sim.c:241 SELECT (file=0x7f10)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x22)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=34)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=34 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:241 SELECT (file=0x6f40)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=15)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=28)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=28 sw1=0x94 sw2=0x08)<000e> sim.c:952 command failed<000e> sim.c:151 sending result to callback function (type=1)<0004> subscriber.c:608 SIM reading failed, ignoring!<0004> subscriber.c:556 Requesting SIM file 0x6f20<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:697 go MF<000e> sim.c:241 SELECT (file=0x3f00)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x22)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=34)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=34 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:706 requested path is longer, go child DFgsm<000e> sim.c:241 SELECT (file=0x7f20)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x22)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=34)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=34 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:241 SELECT (file=0x6f20)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=15)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=9)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=9 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:342 received KEY from SIM<0004> subscriber.c:556 Requesting SIM file 0x6f30<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:241 SELECT (file=0x6f30)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=15)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=44)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=44 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:380 received PLMN selector (mcc=420 mnc=03) from SIM<0004> subscriber.c:380 received PLMN selector (mcc=424 mnc=01) from SIM<0004> subscriber.c:380 received PLMN selector (mcc=424 mnc=02) from SIM<0004> subscriber.c:556 Requesting SIM file 0x6f31<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:241 SELECT (file=0x6f31)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=15)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=1)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=1 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:401 received HPPLMN 5 (30 mins) from SIM<0004> subscriber.c:556 Requesting SIM file 0x6f46<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:241 SELECT (file=0x6f46)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=15)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=17)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=17 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:424 received SPN mobily from SIM<0004> subscriber.c:556 Requesting SIM file 0x6f78<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:241 SELECT (file=0x6f78)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=15)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=2)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=2 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:442 received ACC 0100 from SIM<0004> subscriber.c:556 Requesting SIM file 0x6f7b<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:241 SELECT (file=0x6f7b)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=15)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=30)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=30 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:518 (ms 1) Done reading SIM card (IMSI=420032210948448 Saudi Arabia, Mobily)<0004> subscriber.c:530 -> SIM card registered to 420 03 (Saudi Arabia, Mobily)<0004> gsm48_mm.c:4160 (ms 1) Received 'MMR_REG_REQ' event<0002> gsm322.c:3176 (ms 1) Event 'EVENT_SIM_INSERT' for automatic PLMN selection in state 'A0 null'<000d> gsm322.c:1090 Start search of last registered PLMN (mcc=420 mnc=03 Saudi Arabia, Mobily)<0002> gsm322.c:1094 Use RPLMN (mcc=420 mnc=03 Saudi Arabia, Mobily)<0002> gsm322.c:530 new state 'A0 null' -> 'A1 trying RPLMN'<0003> gsm322.c:3396 (ms 1) Event 'EVENT_NEW_PLMN' for Cell selection in state 'C0 null'<000d> gsm322.c:3007 Selecting network (mcc=420 mnc=03 Saudi Arabia, Mobily)<0003> gsm322.c:3016 Start normal cell selection.<0003> gsm322.c:559 new state 'C0 null' -> 'C1 normal cell selection' Second using compal E88: linux-d5zo:/home/basem/osmocom-bb/src/host/layer23/src/mobile # ./mobile -i 127.0.0.1Copyright (C) 2008-2010 ...Contributions by ... License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl.html>This is free software: you are free to change and redistribute it.There is NO WARRANTY, to the extent permitted by law. <000e> sim.c:1206 init SIM client<0005> gsm48_cc.c:61 init Call Control<0001> gsm48_rr.c:5052 init Radio Ressource process<0004> gsm48_mm.c:1239 init Mobility Management process<0004> gsm48_mm.c:990 Selecting PLMN SEARCH state, because no SIM.<0002> gsm322.c:3556 init PLMN process<0003> gsm322.c:3557 init Cell Selection process<0003> gsm322.c:3614 Read stored BA list (mcc=420 mnc=01 Saudi Arabia, Al Jawal)Mobile '1' initialized, please start phone now!VTY available on port 4247.<0004> subscriber.c:556 Requesting SIM file 0x2fe2<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:697 go MF<000e> sim.c:241 SELECT (file=0x3f00)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x23)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=35)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=35 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:241 SELECT (file=0x2fe2)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x13)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=19)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=19 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=10)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=10 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:229 received ICCID 8996601230003583462 from SIM<0004> subscriber.c:556 Requesting SIM file 0x6f07<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:706 requested path is longer, go child DFgsm<000e> sim.c:241 SELECT (file=0x7f20)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x23)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=35)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=35 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:241 SELECT (file=0x6f07)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x13)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=19)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=19 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=9)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=9 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:259 received IMSI 420012300358346 from SIM<0004> subscriber.c:556 Requesting SIM file 0x6f7e<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:241 SELECT (file=0x6f7e)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x13)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=19)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=19 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=11)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=11 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:295 received LOCI from SIM (mcc=420 mnc=01 lac=0x012f U1)<0004> subscriber.c:556 Requesting SIM file 0x6f40<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:697 go MF<000e> sim.c:241 SELECT (file=0x3f00)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x23)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=35)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=35 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:706 requested path is longer, go child DFtelecom<000e> sim.c:241 SELECT (file=0x7f10)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x23)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=35)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=35 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:241 SELECT (file=0x6f40)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x13)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=19)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=19 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=132)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=132 sw1=0x94 sw2=0x08)<000e> sim.c:952 command failed<000e> sim.c:151 sending result to callback function (type=1)<0004> subscriber.c:608 SIM reading failed, ignoring!<0004> subscriber.c:556 Requesting SIM file 0x6f20<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:697 go MF<000e> sim.c:241 SELECT (file=0x3f00)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x23)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=35)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=35 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:706 requested path is longer, go child DFgsm<000e> sim.c:241 SELECT (file=0x7f20)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x23)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=35)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=35 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:241 SELECT (file=0x6f20)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x13)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=19)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=19 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=9)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=9 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:342 received KEY from SIM<0004> subscriber.c:556 Requesting SIM file 0x6f30<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:241 SELECT (file=0x6f30)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x13)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=19)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=19 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=60)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=60 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:556 Requesting SIM file 0x6f31<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:241 SELECT (file=0x6f31)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x13)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=19)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=19 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=1)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=1 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:401 received HPPLMN 5 (30 mins) from SIM<0004> subscriber.c:556 Requesting SIM file 0x6f46<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:241 SELECT (file=0x6f46)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x13)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=19)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=19 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=17)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=17 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:635 SIM reading failed, file invalid<0004> subscriber.c:556 Requesting SIM file 0x6f78<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:241 SELECT (file=0x6f78)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x13)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=19)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=19 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=2)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=2 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:442 received ACC 0040 from SIM<0004> subscriber.c:556 Requesting SIM file 0x6f7b<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:241 SELECT (file=0x6f7b)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x13)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=19)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=19 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=12)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=12 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:518 (ms 1) Done reading SIM card (IMSI=420012300358346 Saudi Arabia, Al Jawal)<0004> subscriber.c:530 -> SIM card registered to 420 01 (Saudi Arabia, Al Jawal)<0004> gsm48_mm.c:4160 (ms 1) Received 'MMR_REG_REQ' event<0002> gsm322.c:3176 (ms 1) Event 'EVENT_SIM_INSERT' for automatic PLMN selection in state 'A0 null'<000d> gsm322.c:1090 Start search of last registered PLMN (mcc=420 mnc=01 Saudi Arabia, Al Jawal)<0002> gsm322.c:1094 Use RPLMN (mcc=420 mnc=01 Saudi Arabia, Al Jawal)<0002> gsm322.c:530 new state 'A0 null' -> 'A1 trying RPLMN'<0003> gsm322.c:3396 (ms 1) Event 'EVENT_NEW_PLMN' for Cell selection in state 'C0 null'<000d> gsm322.c:3007 Selecting network (mcc=420 mnc=01 Saudi Arabia, Al Jawal)<0003> gsm322.c:3013 Start stored cell selection.<0003> gsm322.c:559 new state 'C0 null' -> 'C2 stored cell selection'<0003> gsm322.c:2456 Getting PM for ARFCN 100 twice. Overwriting the first! Please fix prim_pm.c<0003> gsm322.c:2468 Found signal (ARFCN 103 rxlev -104 (6))<0003> gsm322.c:2456 Getting PM for ARFCN 106 twice. Overwriting the first! Please fix prim_pm.c<0003> gsm322.c:2468 Found signal (ARFCN 108 rxlev -106 (4))<0003> gsm322.c:2456 Getting PM for ARFCN 108 twice. Overwriting the first! Please fix prim_pm.c<0003> gsm322.c:2456 Getting PM for ARFCN 112 twice. Overwriting the first! Please fix prim_pm.c<0003> gsm322.c:2468 Found signal (ARFCN 113 rxlev -105 (5))<0003> gsm322.c:2468 Found signal (ARFCN 117 rxlev -106 (4))<0003> gsm322.c:2468 Found signal (ARFCN 118 rxlev -104 (6))<0003> gsm322.c:2468 Found signal (ARFCN 120 rxlev -92 (18))<0003> gsm322.c:2468 Found signal (ARFCN 121 rxlev -72 (38))<0003> gsm322.c:2456 Getting PM for ARFCN 124 twice. Overwriting the first! Please fix prim_pm.c<0003> gsm322.c:2468 Found signal (ARFCN 762(DCS) rxlev -54 (56))<0003> gsm322.c:2456 Getting PM for ARFCN 762(DCS) twice. Overwriting the first! Please fix prim_pm.c<0003> gsm322.c:2468 Found signal (ARFCN 762(DCS) rxlev -53 (57))<0003> gsm322.c:2468 Found signal (ARFCN 765(DCS) rxlev -96 (14))<0003> gsm322.c:2456 Getting PM for ARFCN 765(DCS) twice. Overwriting the first! Please fix prim_pm.c<0003> gsm322.c:2468 Found signal (ARFCN 765(DCS) rxlev -95 (15))<0003> gsm322.c:2468 Found signal (ARFCN 766(DCS) rxlev -99 (11))<0003> gsm322.c:2468 Found signal (ARFCN 767(DCS) rxlev -80 (30))<0003> gsm322.c:2468 Found signal (ARFCN 768(DCS) rxlev -91 (19))<0003> gsm322.c:2468 Found signal (ARFCN 773(DCS) rxlev -105 (5))<0003> gsm322.c:2456 Getting PM for ARFCN 773(DCS) twice. Overwriting the first! Please fix prim_pm.c<0003> gsm322.c:2468 Found signal (ARFCN 773(DCS) rxlev -105 (5))<0003> gsm322.c:2468 Found signal (ARFCN 775(DCS) rxlev -89 (21))<0003> gsm322.c:2456 Getting PM for ARFCN 775(DCS) twice. Overwriting the first! Please fix prim_pm.c<0003> gsm322.c:2468 Found signal (ARFCN 775(DCS) rxlev -89 (21))<0003> gsm322.c:2468 Found signal (ARFCN 776(DCS) rxlev -96 (14))<0003> gsm322.c:2468 Found signal (ARFCN 779(DCS) rxlev -86 (24))<0003> gsm322.c:2456 Getting PM for ARFCN 779(DCS) twice. Overwriting the first! Please fix prim_pm.c<0003> gsm322.c:2468 Found signal (ARFCN 779(DCS) rxlev -85 (25))<0003> gsm322.c:2456 Getting PM for ARFCN 797(DCS) twice. Overwriting the first! Please fix prim_pm.c<0003> gsm322.c:2456 Getting PM for ARFCN 816(DCS) twice. Overwriting the first! Please fix prim_pm.c<0003> gsm322.c:2396 Found 15 frequencies.<0003> gsm322.c:276 Sync to ARFCN=762(DCS) rxlev=-53 (No sysinfo yet, ccch mode NONE)<0003> gsm322.c:2486 Channel synched. (ARFCN=762(DCS), snr=9, BSIC=31)<0001> gsm322.c:2513 using DSC of 90<0003> gsm48_rr.c:4656 Channel provides data.<0001> sysinfo.c:711 Ignoring SYSTEM INFORMATION 4 until SI 1 is received.<0001> gsm48_rr.c:1869 New SYSTEM INFORMATION 4 (mcc 000 mnc 000 lac 0x0000)<0001> sysinfo.c:692 New SYSTEM INFORMATION 3 (mcc 420 mnc 01 lac 0x012f)<0001> gsm48_rr.c:1835 Changing CCCH_MODE to 1<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:1801 New SYSTEM INFORMATION 2ter<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2129 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> sysinfo.c:599 Now decoding previously received SYSTEM INFORMATION 4<0001> sysinfo.c:432 Serving cell ARFCN #0: 797<0001> sysinfo.c:432 Serving cell ARFCN #1: 816<0001> sysinfo.c:446 Hopping ARFCN: 0 (bit 797)<0001> sysinfo.c:446 Hopping ARFCN: 1 (bit 816)<0001> gsm48_rr.c:1714 New SYSTEM INFORMATION 1<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2338 IMMEDIATE ASSIGNMENT:<0001> gsm48_rr.c:2350 (ta 0/0m ra 0x00 chan_nr 0x0e MAIO 0 HSN 43 TS 6 SS 0 TSC 6)<0001> gsm48_rr.c:2366 Not for us, no request.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:1743 New SYSTEM INFORMATION 2<0003> gsm322.c:1624 Cell ARFCN 762(DCS): Cell found, (rxlev=-53 mcc=420 mnc=01 lac=012f Saudi Arabia, Al Jawal)<0003> gsm322.c:1635 Cell ARFCN 762(DCS) selected.<0003> gsm322.c:1955 Tune to frequency 762.<0003> gsm322.c:270 Sync to ARFCN=762(DCS) rxlev=-53 (Sysinfo, ccch mode NON-COMB)<0003> gsm322.c:1997 Cell available.<0003> gsm322.c:3396 (ms 1) Event 'EVENT_CELL_FOUND' for Cell selection in state 'C2 stored cell selection'<000d> gsm322.c:2798 Camping normally on cell (ARFCN=762(DCS) mcc=420 mnc=01 Saudi Arabia, Al Jawal)<0003> gsm322.c:559 new state 'C2 stored cell selection' -> 'C3 camped normally'<0004> gsm48_mm.c:4092 (ms 1) Received 'MM_EVENT_CELL_SELECTED' event in state MM IDLE, PLMN search<0004> gsm48_mm.c:901 new MM IDLE state PLMN search -> location updating needed<0004> gsm48_mm.c:901 new MM IDLE state location updating needed -> attempting to update<0004> gsm48_mm.c:2150 Do Loc. upd. for IMSI attach.<000d> gsm48_mm.c:2083 Perform location update (MCC 420, MNC 01 LAC 0x012f)<0004> gsm48_mm.c:2205 LOCATION UPDATING REQUEST<0004> gsm48_mm.c:2227 using LAI (mcc 420 mnc 01 lac 0x012f)<0004> gsm48_mm.c:2235 using TMSI 0x2804a1b5<0004> gsm48_mm.c:906 new state MM IDLE, attempting to update -> wait for RR connection (location updating)<0001> gsm48_rr.c:5019 (ms 1) Message 'RR_EST_REQ' received in state idle<000d> gsm48_rr.c:1245 Establish radio link due to mobility management request<0003> gsm322.c:3396 (ms 1) Event 'EVENT_LEAVE_IDLE' for Cell selection in state 'C3 camped normally'<0003> gsm322.c:3034 Going to camping (normal) ARFCN 762(DCS).<0003> gsm322.c:270 Sync to ARFCN=762(DCS) rxlev=-53 (Sysinfo, ccch mode NON-COMB)<0001> gsm48_rr.c:363 new state idle -> connection pending<0001> gsm48_rr.c:1384 CHANNEL REQUEST: 00 (Location Update with NECI)<0003> gsm322.c:2486 Channel synched. (ARFCN=762(DCS), snr=11, BSIC=31)<0001> gsm322.c:2513 using DSC of 90<0003> gsm48_rr.c:4656 Channel provides data.<0001> gsm48_rr.c:1516 RANDOM ACCESS (requests left 5)<0001> gsm48_rr.c:1573 RANDOM ACCESS (Tx-integer 50 combined no S(lots) 0 ra 0x0a)<0001> gsm48_rr.c:1612 Use MS-TXPWR-MAX-CCH power value 0 (30 dBm)<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:609 MON: f=762 lev=-51 snr= 0 ber= 32 LAI=420 01 012f ID=2dcf<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info^CSignal 2 received.<0004> gsm48_mm.c:4096 (ms 1) Received 'MM_EVENT_IMSI_DETACH' event in state wait for RR connection (location updating)<0004> gsm48_mm.c:1862 IMSI detach delayed.<0001> gsm48_rr.c:609 MON: no cell info OsmocomBB# show ms 1MS '1' is up, MM connection active IMEI: 000000000000000 IMEISV: 0000000000000000 IMEI generation: fixed automatic network selection state: A1 trying RPLMN cell selection state: C3 camped normally radio ressource layer state: connection pending mobility management layer state: wait for RR connection (location updating) I am hoping to read soon from you people. Regards,Basem --- On Tue, 6/14/11, Andreas.Eversberg <Andreas.Eversberg(a)versatel.de> wrote: From: Andreas.Eversberg <Andreas.Eversberg(a)versatel.de> Subject: Re: Facing issues in using OSMOCOM To: "Basem Ahmed" <eng_basemm(a)yahoo.com> Cc: baseband-devel(a)lists.osmocom.org Date: Tuesday, June 14, 2011, 2:07 PM can you send the full mobile output? (from start of application until it halts) > <0002> gsm322.c:3176 (ms 1) Event 'EVENT_SIM_INSERT' for automatic PLMN selection in state 'A0 null' > <000d> gsm322.c:1090 Start search of last registered PLMN (mcc=420 mnc=01 Saudi Arabia, Al Jawal) > <0002> gsm322.c:1094 Use RPLMN (mcc=420 mnc=01 Saudi Arabia, Al Jawal) > <0002> gsm322.c:530 new state 'A0 null' -> 'A1 trying RPLMN' > <0003> gsm322.c:3396 (ms 1) Event 'EVENT_NEW_PLMN' for Cell selection in state 'C0 null' > <000d> gsm322.c:3007 Selecting network (mcc=420 mnc=01 Saudi Arabia, Al Jawal) > <0003> gsm322.c:3013 Start stored cell selection. > <0003> gsm322.c:559 new state 'C0 null' -> 'C2 stored cell selection' can you send me the your ~/.osmocom/bb/1.ba file? don't worry, it will only contain band allocations you have received so far. (rename it an see, if the problem still exists.)

2 1

Re: Facing issues in using OSMOCOM
by Andreas.Eversberg 14 Jun '11

14 Jun '11

can you send the full mobile output? (from start of application until it halts) > <0002> gsm322.c:3176 (ms 1) Event 'EVENT_SIM_INSERT' for automatic PLMN selection in state 'A0 null' > <000d> gsm322.c:1090 Start search of last registered PLMN (mcc=420 mnc=01 Saudi Arabia, Al Jawal) > <0002> gsm322.c:1094 Use RPLMN (mcc=420 mnc=01 Saudi Arabia, Al Jawal) > <0002> gsm322.c:530 new state 'A0 null' -> 'A1 trying RPLMN' > <0003> gsm322.c:3396 (ms 1) Event 'EVENT_NEW_PLMN' for Cell selection in state 'C0 null' > <000d> gsm322.c:3007 Selecting network (mcc=420 mnc=01 Saudi Arabia, Al Jawal) > <0003> gsm322.c:3013 Start stored cell selection. > <0003> gsm322.c:559 new state 'C0 null' -> 'C2 stored cell selection' can you send me the your ~/.osmocom/bb/1.ba file? don't worry, it will only contain band allocations you have received so far. (rename it an see, if the problem still exists.)

1 0

Re: mobile - making a call
by eisencah eisenach 14 Jun '11

14 Jun '11

Hello everyone. After some more digging turns out that removing the "Status 1: 90 00" from the firrmware the SIM response gets back to the upper layers. What I've also noticed is that when the SIM response wasn't getting to the mobile application a L1CTL_RESET was following. My question is : would this L1CTL_RESET have the effect of removing pending packets from the queue? Cause that would sort of explain why the delay introduced by the debug printing would influence the overall behaviour. Thanks, Mihai. --- On Sun, 5/15/11, eisencah eisenach <wbg_1000(a)yahoo.com> wrote: From: eisencah eisenach <wbg_1000(a)yahoo.com> Subject: Re: Fw: Re: mobile - making a call To: baseband-devel(a)lists.osmocom.org Date: Sunday, May 15, 2011, 5:52 PM Hi again. So after some digging I'm quite sure the ADPU response doesn't make it back into the upper layers. My question is , case the osmocon output contains some weird characters (see bellow), I should assume that at that point something went wrong with the serial link? Also is there some flag to compile the firmware such that the prints have no effect, as to offload the serial link? Thanks, Mihai. L1CTL_DATA_REQ (link_id=0x00) ul=00811fe0, ul->payload=00811fe4, data_ind=00811fe4, data_ind->data=00811fe4 l3h=00811fe4 SIM Request (7): a0 a4 00 00 02 6f 20 Status 2: 9F 0F SIM Request (5): a0 c0 00 00 0f Status 1: 90 00 SIM Request (14): a0 d6 00 00 09 ff 49 fd 1a 49 8f 70 00 01 Status 2: 90ï¿½ï¿½Qï¿½ï¿½L1CTL_PARAM_REQ (ta=1, tx_power=6) L1CTL_DATA_REQ (link_id=0x00) ul=00811fe0, ul->payload=00811fe4, data_ind=00811fe4, data_ind->data=00811fe4 l3h=00811fe4 L1CTL_DATA_REQ (link_id=0x00) ul=008123c4, ul->payload=008123c8, data_ind=008123c8, data_ind->data=008123c8 l3h=008123c8 --- On Sat, 5/7/11, Sylvain Munaut <246tnt(a)gmail.com> wrote: From: Sylvain Munaut <246tnt(a)gmail.com> Subject: Re: Fw: Re: mobile - making a call To: "eisencah eisenach" <wbg_1000(a)yahoo.com> Cc: baseband-devel(a)lists.osmocom.org Date: Saturday, May 7, 2011, 11:07 AM > So any ideea where to look for the answer to the UPDATE_BINARY message? No not really ... But there is a good reason the SIM driver is not in master ... it sucks at several level, including blocking behavior in interrupt context IIRC, so it's totally plausible your machine speed triggers some weird things. My advice would be to: - Cleanup the SIM driver - Bypass it in the code and try to access a real PCSC device locally rather than the built in SIM reader. Both are non-trivial of course. Cheers, Sylvain

1 0

Fw: Re: Facing issues in using OSMOCOM
by Basem Ahmed 13 Jun '11

13 Jun '11

Also we are sure about the correct setup of ARM tool chain!! any help please about such issue. --- On Mon, 6/13/11, Basem Ahmed <eng_basemm(a)yahoo.com> wrote: From: Basem Ahmed <eng_basemm(a)yahoo.com> Subject: Re: Facing issues in using OSMOCOM To: "baseband-devel" <baseband-devel(a)lists.osmocom.org> Date: Monday, June 13, 2011, 11:41 AM Hi All GNUMonks, I am adding the log output here for reference as suggesed by Sylvain: Mobile Output: <000e> sim.c:949 command successfull <000e> sim.c:571 GET RESPONSE (len=19) <000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000e> sim.c:876 received APDU (len=19 sw1=0x90 sw2=0x00) <000e> sim.c:949 command successfull <000e> sim.c:277 READ BINARY (offset=0 len=2) <000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0) <000e> sim.c:876 received APDU (len=2 sw1=0x90 sw2=0x00) <000e> sim.c:949 command successfull <000e> sim.c:151 sending result to callback function (type=0) <0004> subscriber.c:442 received ACC 0040 from SIM <0004> subscriber.c:556 Requesting SIM file 0x6f7b <000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004) <000e> sim.c:241 SELECT (file=0x6f7b) <000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4) <000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x13) <000e> sim.c:949 command successfull <000e> sim.c:571 GET RESPONSE (len=19) <000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000e> sim.c:876 received APDU (len=19 sw1=0x90 sw2=0x00) <000e> sim.c:949 command successfull <000e> sim.c:277 READ BINARY (offset=0 len=12) <000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0) <000e> sim.c:876 received APDU (len=12 sw1=0x90 sw2=0x00) <000e> sim.c:949 command successfull <000e> sim.c:151 sending result to callback function (type=0) <0004> subscriber.c:518 (ms 1) Done reading SIM card (IMSI=420012300358346 Saudi Arabia, Al Jawal) <0004> subscriber.c:530 -> SIM card registered to 420 01 (Saudi Arabia, Al Jawal) <0004> gsm48_mm.c:4160 (ms 1) Received 'MMR_REG_REQ' event <0002> gsm322.c:3176 (ms 1) Event 'EVENT_SIM_INSERT' for automatic PLMN selection in state 'A0 null' <000d> gsm322.c:1090 Start search of last registered PLMN (mcc=420 mnc=01 Saudi Arabia, Al Jawal) <0002> gsm322.c:1094 Use RPLMN (mcc=420 mnc=01 Saudi Arabia, Al Jawal) <0002> gsm322.c:530 new state 'A0 null' -> 'A1 trying RPLMN' <0003> gsm322.c:3396 (ms 1) Event 'EVENT_NEW_PLMN' for Cell selection in state 'C0 null' <000d> gsm322.c:3007 Selecting network (mcc=420 mnc=01 Saudi Arabia, Al Jawal) <0003> gsm322.c:3013 Start stored cell selection. <0003> gsm322.c:559 new state 'C0 null' -> 'C2 stored cell selection' Layer1: Output read_file(../../target/firmware/board/compal_e86/layer1.compalram.bin): file_size=54736, hdr_len=4, dnload_len=54743 got 1 bytes from modem, data looks like: 1b . got 1 bytes from modem, data looks like: f6 . got 1 bytes from modem, data looks like: 02 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 41 A got 1 bytes from modem, data looks like: 02 . got 1 bytes from modem, data looks like: 43 C Received PROMPT2 from phone, starting download handle_write(): 4096 bytes (4096/54743) handle_write(): 4096 bytes (8192/54743) handle_write(): 4096 bytes (12288/54743) handle_write(): 4096 bytes (16384/54743) handle_write(): 4096 bytes (20480/54743) handle_write(): 4096 bytes (24576/54743) handle_write(): 4096 bytes (28672/54743) handle_write(): 4096 bytes (32768/54743) handle_write(): 4096 bytes (36864/54743) handle_write(): 4096 bytes (40960/54743) handle_write(): 4096 bytes (45056/54743) handle_write(): 4096 bytes (49152/54743) handle_write(): 4096 bytes (53248/54743) handle_write(): 1495 bytes (54743/54743) handle_write(): finished got 1 bytes from modem, data looks like: 1b . got 1 bytes from modem, data looks like: f6 . got 1 bytes from modem, data looks like: 02 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 41 A got 1 bytes from modem, data looks like: 03 . got 1 bytes from modem, data looks like: 42 B Received DOWNLOAD ACK from phone, your code is running now! OSMOCOM Layer 1 (revision osmocon_v0.0.0-906-g5bbea93-modified) ====================================================================== Device ID code: 0xb4fb Device Version code: 0x0000 ARM ID code: 0xfff3 cDSP ID code: 0x0128 Die ID code: e144263d880014fd ====================================================================== REG_DPLL=0x2413 CNTL_ARM_CLK=0xf0a1 CNTL_CLK=0xff91 CNTL_RST=0xfff3 CNTL_ARM_DIV=0xfff9 ====================================================================== Power up simcard: Assert DSP into Reset Releasing DSP from Reset Setting some dsp_api.ndb values Setting API NDB parameters DSP Download Status: 0x0001 DSP API Version: 0x0000 0x0000 Finishing download phase DSP Download Status: 0x0002 DSP API Version: 0x3606 0x0000 LOST 1174! SIM Request (7): a0 a4 00 00 02 3f 00 Status 2: 9F 23 SIM Request (5): a0 c0 00 00 23 Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 2f e2 Status 2: 9F 13 SIM Request (5): a0 c0 00 00 13 Status 1: 90 00 SIM Request (5): a0 b0 00 00 0a Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 7f 20 Status 2: 9F 23 SIM Request (5): a0 c0 00 00 23 Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 6f 07 Status 2: 9F 13 SIM Request (5): a0 c0 00 00 13 Status 1: 90 00 SIM Request (5): a0 b0 00 00 09 Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 6f 7e Status 2: 9F 13 SIM Request (5): a0 c0 00 00 13 Status 1: 90 00 SIM Request (5): a0 b0 00 00 0b Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 3f 00 Status 2: 9F 23 SIM Request (5): a0 c0 00 00 23 Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 7f 10 Status 2: 9F 23 SIM Request (5): a0 c0 00 00 23 Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 6f 40 Status 2: 9F 13 SIM Request (5): a0 c0 00 00 13 Status 1: 90 00 SIM Request (5): a0 b0 00 00 84 Status 1: 94 08 SIM Request (7): a0 a4 00 00 02 3f 00 Status 2: 9F 23 SIM Request (5): a0 c0 00 00 23 Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 7f 20 Status 2: 9F 23 SIM Request (5): a0 c0 00 00 23 Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 6f 20 Status 2: 9F 13 SIM Request (5): a0 c0 00 00 13 Status 1: 90 00 SIM Request (5): a0 b0 00 00 09 Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 6f 30 Status 2: 9F 13 SIM Request (5): a0 c0 00 00 13 Status 1: 90 00 SIM Request (5): a0 b0 00 00 3c Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 6f 31 Status 2: 9F 13 SIM Request (5): a0 c0 00 00 13 Status 1: 90 00 SIM Request (5): a0 b0 00 00 01 Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 6f 46 Status 2: 9F 13 SIM Request (5): a0 c0 00 00 13 Status 1: 90 00 SIM Request (5): a0 b0 00 00 11 Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 6f 78 Status 2: 9F 13 SIM Request (5): a0 c0 00 00 13 Status 1: 90 00 SIM Request (5): a0 b0 00 00 02 Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 6f 7b Status 2: 9F 13 SIM Request (5): a0 c0 00 00 13 Status 1: 90 00 SIM Request (5): a0 b0 00 00 0c Status 1: 90 00 --- On Sun, 6/12/11, Basem Ahmed <eng_basemm(a)yahoo.com> wrote: From: Basem Ahmed <eng_basemm(a)yahoo.com> Subject: Re: Facing issues in using OSMOCOM To: "baseband-devel" <baseband-devel(a)lists.osmocom.org> Cc: "Sylvain Munaut" <246tnt(a)gmail.com> Date: Sunday, June 12, 2011, 9:55 PM Dear All, sorry for the previous mistake .Actually I am trying to run the Mobile project but i have some issues there .let me telling you all the procedures i made : 1-git clone the osmocom project2-make the checkout (git checkout origin/sylvain/testing )3-compiling the project(it works after some modification of TX transmitter enable)4-run the loader.compalram.bin(running perfectly)5-run the layer1.comalram.bin6-run telnet localhost and enabling the ms 17-run the mobile the project8-press the power on buttonsfor mobile application ===>it keeps running perfectly exactly as you did in the demo and its says it complete reading the SIM and giving my network name but it stop before checking the network signals at the line:selection network(mcc=420 aljawal )start stored cell selection<003> gsm322.c:559 new state 'C0 null' ->'C2 stored cell Selection' .for the layer1 application===>it downloading successfully and it keeps synchronized with mobile application keep SIM requesting till the line:sim request (5): a0 b0 00 00 0cStaus 1:90 00 Hoping to hear from you soon. regard,--- On Sun, 6/12/11, Sylvain Munaut <246tnt(a)gmail.com> wrote: From: Sylvain Munaut <246tnt(a)gmail.com> Subject: Re: Facing issues in using OSMOCOM To: "Basem Ahmed" <eng_basemm(a)yahoo.com>, "baseband-devel" <baseband-devel(a)lists.osmocom.org> Date: Sunday, June 12, 2011, 7:21 PM > How are you? Refer to below mail. I read the mailing list, please do not send to me directly. Only CC me (and CC, not a separate mail forward please) if you're posting a patch and you want me to review it and merge it. If I have an answer, I will answer ... (but in this case, from your description it seems like a 'mobile' problem which I virtually never use, so I may not have an answer at all) > I am able to download the loader.compalram.bin and layer1.compalram.bin and running the mobile project. I am also using the telnet for configuration. But it is stopping at following some state mentioned in attached file. Sorry, but if you attach .docx file, there is zero chance I'm gonna look at it. 1) .docx is a proprietary format, don't expect people can read it 2) Even if this was a open document ( .ods or so ), I don't use office suite at all. 3) A .txt attachement still requires me to download it and look at it ... 4) In general, to maximize your chance of getting an answer, you have to do your best to minimize the work to be done by the people you want to help you. In this particular case: - You properly included a description of your setup and up to where you got, that's great. - What's missing is a 'snippet' of the log with the 'state' it seems locked it. - Then at the end of the mail, cut and paste the complete logs (both from osmocon and from the mobile app). - If possible avoid HTML mail as well ... (don't take all this bad and/or personally, just trying to help you maximize your chance of getting the answers you're looking for). Cheers, Sylvain

1 0

Re: Facing issues in using OSMOCOM
by Basem Ahmed 13 Jun '11

13 Jun '11

Hi All GNUMonks, I am adding the log output here for reference as suggesed by Sylvain: Mobile Output: <000e> sim.c:949 command successfull <000e> sim.c:571 GET RESPONSE (len=19) <000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000e> sim.c:876 received APDU (len=19 sw1=0x90 sw2=0x00) <000e> sim.c:949 command successfull <000e> sim.c:277 READ BINARY (offset=0 len=2) <000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0) <000e> sim.c:876 received APDU (len=2 sw1=0x90 sw2=0x00) <000e> sim.c:949 command successfull <000e> sim.c:151 sending result to callback function (type=0) <0004> subscriber.c:442 received ACC 0040 from SIM <0004> subscriber.c:556 Requesting SIM file 0x6f7b <000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004) <000e> sim.c:241 SELECT (file=0x6f7b) <000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4) <000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x13) <000e> sim.c:949 command successfull <000e> sim.c:571 GET RESPONSE (len=19) <000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000e> sim.c:876 received APDU (len=19 sw1=0x90 sw2=0x00) <000e> sim.c:949 command successfull <000e> sim.c:277 READ BINARY (offset=0 len=12) <000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0) <000e> sim.c:876 received APDU (len=12 sw1=0x90 sw2=0x00) <000e> sim.c:949 command successfull <000e> sim.c:151 sending result to callback function (type=0) <0004> subscriber.c:518 (ms 1) Done reading SIM card (IMSI=420012300358346 Saudi Arabia, Al Jawal) <0004> subscriber.c:530 -> SIM card registered to 420 01 (Saudi Arabia, Al Jawal) <0004> gsm48_mm.c:4160 (ms 1) Received 'MMR_REG_REQ' event <0002> gsm322.c:3176 (ms 1) Event 'EVENT_SIM_INSERT' for automatic PLMN selection in state 'A0 null' <000d> gsm322.c:1090 Start search of last registered PLMN (mcc=420 mnc=01 Saudi Arabia, Al Jawal) <0002> gsm322.c:1094 Use RPLMN (mcc=420 mnc=01 Saudi Arabia, Al Jawal) <0002> gsm322.c:530 new state 'A0 null' -> 'A1 trying RPLMN' <0003> gsm322.c:3396 (ms 1) Event 'EVENT_NEW_PLMN' for Cell selection in state 'C0 null' <000d> gsm322.c:3007 Selecting network (mcc=420 mnc=01 Saudi Arabia, Al Jawal) <0003> gsm322.c:3013 Start stored cell selection. <0003> gsm322.c:559 new state 'C0 null' -> 'C2 stored cell selection' Layer1: Output read_file(../../target/firmware/board/compal_e86/layer1.compalram.bin): file_size=54736, hdr_len=4, dnload_len=54743 got 1 bytes from modem, data looks like: 1b . got 1 bytes from modem, data looks like: f6 . got 1 bytes from modem, data looks like: 02 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 41 A got 1 bytes from modem, data looks like: 02 . got 1 bytes from modem, data looks like: 43 C Received PROMPT2 from phone, starting download handle_write(): 4096 bytes (4096/54743) handle_write(): 4096 bytes (8192/54743) handle_write(): 4096 bytes (12288/54743) handle_write(): 4096 bytes (16384/54743) handle_write(): 4096 bytes (20480/54743) handle_write(): 4096 bytes (24576/54743) handle_write(): 4096 bytes (28672/54743) handle_write(): 4096 bytes (32768/54743) handle_write(): 4096 bytes (36864/54743) handle_write(): 4096 bytes (40960/54743) handle_write(): 4096 bytes (45056/54743) handle_write(): 4096 bytes (49152/54743) handle_write(): 4096 bytes (53248/54743) handle_write(): 1495 bytes (54743/54743) handle_write(): finished got 1 bytes from modem, data looks like: 1b . got 1 bytes from modem, data looks like: f6 . got 1 bytes from modem, data looks like: 02 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 41 A got 1 bytes from modem, data looks like: 03 . got 1 bytes from modem, data looks like: 42 B Received DOWNLOAD ACK from phone, your code is running now! OSMOCOM Layer 1 (revision osmocon_v0.0.0-906-g5bbea93-modified) ====================================================================== Device ID code: 0xb4fb Device Version code: 0x0000 ARM ID code: 0xfff3 cDSP ID code: 0x0128 Die ID code: e144263d880014fd ====================================================================== REG_DPLL=0x2413 CNTL_ARM_CLK=0xf0a1 CNTL_CLK=0xff91 CNTL_RST=0xfff3 CNTL_ARM_DIV=0xfff9 ====================================================================== Power up simcard: Assert DSP into Reset Releasing DSP from Reset Setting some dsp_api.ndb values Setting API NDB parameters DSP Download Status: 0x0001 DSP API Version: 0x0000 0x0000 Finishing download phase DSP Download Status: 0x0002 DSP API Version: 0x3606 0x0000 LOST 1174! SIM Request (7): a0 a4 00 00 02 3f 00 Status 2: 9F 23 SIM Request (5): a0 c0 00 00 23 Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 2f e2 Status 2: 9F 13 SIM Request (5): a0 c0 00 00 13 Status 1: 90 00 SIM Request (5): a0 b0 00 00 0a Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 7f 20 Status 2: 9F 23 SIM Request (5): a0 c0 00 00 23 Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 6f 07 Status 2: 9F 13 SIM Request (5): a0 c0 00 00 13 Status 1: 90 00 SIM Request (5): a0 b0 00 00 09 Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 6f 7e Status 2: 9F 13 SIM Request (5): a0 c0 00 00 13 Status 1: 90 00 SIM Request (5): a0 b0 00 00 0b Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 3f 00 Status 2: 9F 23 SIM Request (5): a0 c0 00 00 23 Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 7f 10 Status 2: 9F 23 SIM Request (5): a0 c0 00 00 23 Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 6f 40 Status 2: 9F 13 SIM Request (5): a0 c0 00 00 13 Status 1: 90 00 SIM Request (5): a0 b0 00 00 84 Status 1: 94 08 SIM Request (7): a0 a4 00 00 02 3f 00 Status 2: 9F 23 SIM Request (5): a0 c0 00 00 23 Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 7f 20 Status 2: 9F 23 SIM Request (5): a0 c0 00 00 23 Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 6f 20 Status 2: 9F 13 SIM Request (5): a0 c0 00 00 13 Status 1: 90 00 SIM Request (5): a0 b0 00 00 09 Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 6f 30 Status 2: 9F 13 SIM Request (5): a0 c0 00 00 13 Status 1: 90 00 SIM Request (5): a0 b0 00 00 3c Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 6f 31 Status 2: 9F 13 SIM Request (5): a0 c0 00 00 13 Status 1: 90 00 SIM Request (5): a0 b0 00 00 01 Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 6f 46 Status 2: 9F 13 SIM Request (5): a0 c0 00 00 13 Status 1: 90 00 SIM Request (5): a0 b0 00 00 11 Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 6f 78 Status 2: 9F 13 SIM Request (5): a0 c0 00 00 13 Status 1: 90 00 SIM Request (5): a0 b0 00 00 02 Status 1: 90 00 SIM Request (7): a0 a4 00 00 02 6f 7b Status 2: 9F 13 SIM Request (5): a0 c0 00 00 13 Status 1: 90 00 SIM Request (5): a0 b0 00 00 0c Status 1: 90 00 --- On Sun, 6/12/11, Basem Ahmed <eng_basemm(a)yahoo.com> wrote: From: Basem Ahmed <eng_basemm(a)yahoo.com> Subject: Re: Facing issues in using OSMOCOM To: "baseband-devel" <baseband-devel(a)lists.osmocom.org> Cc: "Sylvain Munaut" <246tnt(a)gmail.com> Date: Sunday, June 12, 2011, 9:55 PM Dear All, sorry for the previous mistake .Actually I am trying to run the Mobile project but i have some issues there .let me telling you all the procedures i made : 1-git clone the osmocom project2-make the checkout (git checkout origin/sylvain/testing )3-compiling the project(it works after some modification of TX transmitter enable)4-run the loader.compalram.bin(running perfectly)5-run the layer1.comalram.bin6-run telnet localhost and enabling the ms 17-run the mobile the project8-press the power on buttonsfor mobile application ===>it keeps running perfectly exactly as you did in the demo and its says it complete reading the SIM and giving my network name but it stop before checking the network signals at the line:selection network(mcc=420 aljawal )start stored cell selection<003> gsm322.c:559 new state 'C0 null' ->'C2 stored cell Selection' .for the layer1 application===>it downloading successfully and it keeps synchronized with mobile application keep SIM requesting till the line:sim request (5): a0 b0 00 00 0cStaus 1:90 00 Hoping to hear from you soon. regard,--- On Sun, 6/12/11, Sylvain Munaut <246tnt(a)gmail.com> wrote: From: Sylvain Munaut <246tnt(a)gmail.com> Subject: Re: Facing issues in using OSMOCOM To: "Basem Ahmed" <eng_basemm(a)yahoo.com>, "baseband-devel" <baseband-devel(a)lists.osmocom.org> Date: Sunday, June 12, 2011, 7:21 PM > How are you? Refer to below mail. I read the mailing list, please do not send to me directly. Only CC me (and CC, not a separate mail forward please) if you're posting a patch and you want me to review it and merge it. If I have an answer, I will answer ... (but in this case, from your description it seems like a 'mobile' problem which I virtually never use, so I may not have an answer at all) > I am able to download the loader.compalram.bin and layer1.compalram.bin and running the mobile project. I am also using the telnet for configuration. But it is stopping at following some state mentioned in attached file. Sorry, but if you attach .docx file, there is zero chance I'm gonna look at it. 1) .docx is a proprietary format, don't expect people can read it 2) Even if this was a open document ( .ods or so ), I don't use office suite at all. 3) A .txt attachement still requires me to download it and look at it ... 4) In general, to maximize your chance of getting an answer, you have to do your best to minimize the work to be done by the people you want to help you. In this particular case: - You properly included a description of your setup and up to where you got, that's great. - What's missing is a 'snippet' of the log with the 'state' it seems locked it. - Then at the end of the mail, cut and paste the complete logs (both from osmocon and from the mobile app). - If possible avoid HTML mail as well ... (don't take all this bad and/or personally, just trying to help you maximize your chance of getting the answers you're looking for). Cheers, Sylvain

1 0

Re: Facing issues in using OSMOCOM
by Sylvain Munaut 12 Jun '11

12 Jun '11

> How are you? Refer to below mail. I read the mailing list, please do not send to me directly. Only CC me (and CC, not a separate mail forward please) if you're posting a patch and you want me to review it and merge it. If I have an answer, I will answer ... (but in this case, from your description it seems like a 'mobile' problem which I virtually never use, so I may not have an answer at all) > I am able to download the loader.compalram.bin and layer1.compalram.bin and running the mobile project. I am also using the telnet for configuration. But it is stopping at following some state mentioned in attached file. Sorry, but if you attach .docx file, there is zero chance I'm gonna look at it. 1) .docx is a proprietary format, don't expect people can read it 2) Even if this was a open document ( .ods or so ), I don't use office suite at all. 3) A .txt attachement still requires me to download it and look at it ... 4) In general, to maximize your chance of getting an answer, you have to do your best to minimize the work to be done by the people you want to help you. In this particular case: - You properly included a description of your setup and up to where you got, that's great. - What's missing is a 'snippet' of the log with the 'state' it seems locked it. - Then at the end of the mail, cut and paste the complete logs (both from osmocon and from the mobile app). - If possible avoid HTML mail as well ... (don't take all this bad and/or personally, just trying to help you maximize your chance of getting the answers you're looking for). Cheers, Sylvain

3 2

Facing issues in using OSMOCOM
by Basem Ahmed 12 Jun '11

12 Jun '11

Hi GNUGeeks, I am trying to use OSMOCOM project for calling purpose. I tried the current master and remotes/origin/sylvain/testing branch also. My Linux version is OpenSUSE 11.2 (2.6.31.5-0.1-default) and mobile model is C139. And we used the model c140xor in the loader osmocon loader command. I am able to download the loader.compalram.bin and layer1.compalram.bin and running the mobile project. I am also using the telnet for configuration. But it is stopping at following some state mentioned in attached file. Hoping to read soon from you guys. Regards,Basem

1 0

Error while compiling the stack
by nagesh reddy 08 Jun '11

08 Jun '11

Hi, i am getting the below error when i try to compile the GSM stack sources. administrator@administrator-desktop:~/osmocom-bb/src$ make cd shared/libosmocore && autoreconf -i /bin/sh: autoreconf: not found make: *** [shared/libosmocore/configure] Error 127 can any one try to help me. regards, nagesh.

2 1

Calypso JTAG
by Drasko DRASKOVIC 08 Jun '11

08 Jun '11

Hi all, did anyone succeeded on attaching to JTAG port of Calypso ? I was looking at the docs here : http://bb.osmocom.org/trac/wiki/MotorolaC123, especially this : http://bb.osmocom.org/trac/attachment/wiki/MotorolaC123/compal_testpads.png, so I was wondering if someone has used JTAG, specifficaly with OpenOCD or UrJTAG ? I am planning to do some work on NuttX port, and I think that JTAG debugging would be very convenient for this kind of low level task. Also, I think that JTAG RAM flashing should be faster than current Osmocon RS232 method. Did anyone tried this and can osmocon be instructed that the code is already present in RAM, i.e. JTAG uploaded ? Best regards, Drasko

2 3

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

baseband-devel