baseband-devel September 2011

baseband-devel@lists.osmocom.org

31 participants
44 discussions

by Marcin Mielczarczyk

Hi All! That's true, I managed to run U-Boot on MT6235, but linux kernel is not fully functional yet (it's fresh stuff as I managed to ran it on Tuesday and then I was off to conference). For MT6235 development I chose Sciphone G2, which is pretty cheap. After some time I managed to download code to SRAM (just 64KB) using MTK's FlashTool. MTK FlashTool communicates over UART directly with MT6235 bootloader and sends its own chunk of code (about 58KB) which is executed in SRAM and communicates with FlashTool. I found on pudn.com some pack to customize code loaded by FlashTool, thanks to which I could download my own code to SRAM (without JTAG). The problem was that it had to be linked with some security libraries which occupied about 56KB and not much memory left for my own code. Then I decided to try find JTAG pins to get all control on MT6235. That took me sometime, but finally I succeeded. The other bigger issue was initializing DRAM controller to be able to download bigger code (linux kernel + uboot) to external RAM. In sciphone there is problem that all interesting chips are under metal shield which is pretty havily soldered. In this case I couldn't read what kind of RAM memory is mounted without destroying the board (I don't have such soldering machine which could unsolder so big metal shield). Thanks to JTAG I could attach to target and then dump DRAM controller registers from processor running MTK's software, but setting these values after processor start and configuration of PLL didn't work. I decided to disassemble bootloader which could show me how DRAM controller is initialized and how code fron NAND is loaded (to be able to flash U-Boot and kernel to NAND so MT6235 will start my code automatically and I will not have to use JTAG). Currently I have knowledge how internal MT6235 bootloader is loading code from memory during startup and I also extracted procedure of DRAM controller initialization. Thanks to that I'm able to run U-Boot from the very begining of processor startup. The problem is that I have just one piece of Sciphone G2 and I don't want to flash it yet to not break existing code in it. Thanks to running device I'm able to attach with JTAG and check how peripherals are configured (i.e. LCD, MMC, etc.). I have backup of flash, but I'm not 100% sure if I will flash it back, phone will startup. That's why I bought second piece of Sciphone G2 and should receive it today or on Tuesday (this Monday is holiday in Poland). In this case I'll flash U-Boot to NAND and try to make it working. Then we could load the rest of code from U-Boot (to RAM or NAND over serial). You can see how my setup looks on attached picture. The good thing about it is that the same bootloader is used in MT622x, so it should be fairly easy to do the same on phones based on that SoCs (but unfortuantely it's just ARM7). If it comes to code, of course I can share it on "git.osmocom.org". Currently it's just basic port of U-Boot and not much for linux kernel, but I'm working on this now so I'll push it when it'll be ready. Currently I'm working on driver for NAND memory for U-Boot, so we could flash linux kernel. When that will be ready I'll push the code. Then I'll switch to linux kernel and when it'll be functional I also push the code. At this stage you will not need to have JTAG and you could load the code over serial in U-Boot. If it comes to GSM I didn't work with it before. I actualy worked 6 months in L2/3 team for LTE (on RRC) but it's different story. That could be really outstanding thing if we could run first phone ever with whole code open (from BB up to APP). BR, Marcin

13 years, 5 months

calypso SIM driver on c139 (also: l1ctl SIM APDU)

by Gianni Tedesco

The SIM and the SIM reader in the phone and the mechanical contact between them are definitely working because the SIM can be accessed from the motorola firmware, from another phone and from a PC smartcard reader with no PIN or anything. However, under simtest firmware no data is received by the phone, even the ATR is zero bytes... Anybody had this problem? Also, is l1CTL SIM APDU command not implemented in the layer1 firmware? How are people making calls without a SIM? :P Gianni ----------------SIMTEST----8<----------------- Initializing driver: SIM: Registering interrupt handler for simcard-interface ====================== CALYPSO SIM REGISTER DUMP ===================== Reg_sim_cmd register (R/W) - FFFE:0000 |-REG_SIM_CMD = 0000 | |-REG_SIM_CMD_CMDCARDRST = 0 ==> SIM card reset sequence disabled. | |-REG_SIM_CMD_CMDIFRST = 0 | |-REG_SIM_CMD_CMDSTOP = 0 | |-REG_SIM_CMD_CMDSTART = 0 | |-REG_SIM_CMD_MODULE_CLK_EN = 0 ==> Clock of the module disabled. |-REG_SIM_STAT = 000b | |-REG_SIM_STAT_STATNOCARD = 1 ==> No card! | |-REG_SIM_STAT_STATTXPAR = 1 ==> Parity ok! | |-REG_SIM_STAT_STATFIFOFULL = 0 | |-REG_SIM_STAT_STATFIFOEMPTY = 1 ==> Fifo empty! |-REG_SIM_CONF1 = 000c | |-REG_SIM_CONF1_CONFCHKPAR = 0 ==> Parity check on reception disabled. | |-REG_SIM_CONF1_CONFCODCONV = 0 ==> Coding convention is direct (normal). | |-REG_SIM_CONF1_CONFTXRX = 1 ==> SIO line direction is in transmit mode. | |-REG_SIM_CONF1_CONFSCLKEN = 1 ==> SIM clock in normal mode. | |-REG_SIM_CONF1_reserved = 0 ==> ETU period is CONFETUPERIOD. | |-REG_SIM_CONF1_CONFSCLKDIV = 0 ==> SIM clock frequency is 13/4 Mhz. | |-REG_SIM_CONF1_CONFSCLKLEV = 0 ==> SIM clock idle level is low. | |-REG_SIM_CONF1_CONFETUPERIOD = 0 ==> ETU period is 372/8*1/Fsclk. | |-REG_SIM_CONF1_CONFBYPASS = 0 ==> Hardware timers and start and stop sequences are normal. | |-REG_SIM_CONF1_CONFSVCCLEV = 0 ==> SVCC Level is low (Only valid when CONFBYPASS = 1). | |-REG_SIM_CONF1_CONFSRSTLEV = 0 ==> SRST Level is low (Only valid when CONFBYPASS = 1). | |-REG_SIM_CONF1_CONFTRIG = 0x0 (FIFO trigger level) | |-REG_SIM_CONF1_CONFSIOLOW = 0 |-REG_SIM_CONF2 = 0940 | |-REG_SIM_CONF2_CONFTFSIM = 0x0 (time delay for filtering of SIM_CD) | |-REG_SIM_CONF2_CONFTDSIM = 0x4 (time delay for contact activation/deactivation) | |-REG_SIM_CONF2_CONFWAITI = 0x9 (CONFWAITI overflow wait time between two received chars) |-REG_SIM_IT = 0000 | |-REG_SIM_IT_SIM_NATR = 0 ==> On read access to REG_SIM_IT. | |-REG_SIM_IT_SIM_WT = 0 ==> On read access to REG_SIM_IT. | |-REG_SIM_IT_SIM_OV = 0 ==> On read access to REG_SIM_IT. | |-REG_SIM_IT_SIM_TX = 0 ==> On write access to REG_SIM_DTX or on switching | | from transmit to receive mode (CONFTXRX bit) | |-REG_SIM_IT_SIM_RX = 0 ==> On read access to REG_SIM_DRX. |-REG_SIM_DRX = 0100 | |-REG_SIM_DRX_SIM_DRX = 0x0 (next data byte in FIFO available for reading) | |-REG_SIM_DRX_STATRXPAR = 1 ==> Parity Ok. |-REG_SIM_DTX = 00 (next data byte to be transmitted) |-REG_SIM_MASKIT = 003f | |-REG_SIM_MASKIT_MASK_SIM_NATR = 1 ==> No-answer-to-reset interrupt is masked. | |-REG_SIM_MASKIT_MASK_SIM_WT = 1 ==> Character wait-time overflow interrupt is masked. | |-REG_SIM_MASKIT_MASK_SIM_OV = 1 ==> Receive overflow interrupt is masked. | |-REG_SIM_MASKIT_MASK_SIM_TX = 1 ==> Waiting characters to be transmit interrupt is masked. | |-REG_SIM_MASKIT_MASK_SIM_RX = 1 ==> Waiting characters to be read interrupt is masked. | |-REG_SIM_MASKIT_MASK_SIM_CD = 1 ==> SIM card insertion/extraction interrupt is masked. |-REG_SIM_IT_CD = fffe0010 |-REG_SIM_IT_CD_IT_CD = 0 ==> SIM card insertion/extraction interrupt is unmasked. Power up simcard: * Power enabled! * Clock enabled! * Reset released! SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Character underflow! (0 bytes) Reset simcard: * Reset pulled down! * Reset released! SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Character underflow! (0 bytes) SIM-T0: Transceiving APDU-Header: (a0 a4 00 00 02) SIM-ISR: Interrupt caught: Waiting for character to transmit... SIM-ISR: Interrupt caught: Waiting for character to transmit... SIM-ISR: Interrupt caught: Waiting for character to transmit... SIM-ISR: Interrupt caught: Waiting for character to transmit... SIM-ISR: Interrupt caught: Waiting for character to transmit... SIM-T0: Case 2: No input / Output of known length (See also GSM 11.11 Page 34) SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Character underflow! SIM-T0: T0 Protocol error: Missing ACK byte -- aborting! SIM-T0: Transceiving APDU-Header: (a0 c0 00 00 0f) SIM-ISR: Interrupt caught: Waiting for character to transmit... SIM-ISR: Interrupt caught: Waiting for character to transmit... SIM-ISR: Interrupt caught: Waiting for character to transmit... SIM-ISR: Interrupt caught: Waiting for character to transmit... SIM-ISR: Interrupt caught: Waiting for character to transmit... SIM-T0: Case 4: Input / No output (See also GSM 11.11 Page 34) SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Character underflow! SIM-T0: T0 Protocol error: Incorrect or missing answer -- aborting! e0 73 d7 b9 ae ea bf 7e f7 3b 7f 6f 32 fe 25 (15 bytes) Test Phase 1: Testing bare sim commands... * Testing SELECT: Selecting MF SIM-T0: Transceiving APDU-Header: (a0 a4 00 00 02) SIM-ISR: Interrupt caught: Waiting for character to transmit... SIM-ISR: Interrupt caught: Waiting for character to transmit... SIM-ISR: Interrupt caught: Waiting for character to transmit... SIM-ISR: Interrupt caught: Waiting for character to transmit... SIM-ISR: Interrupt caught: Waiting for character to transmit... SIM-T0: Case 2: No input / Output of known length (See also GSM 11.11 Page 34) SIM-ISR: Interrupt caught: Waiting characters to be read... SIM-ISR: Interrupt caught: Character underflow! SIM-T0: T0 Protocol error: Missing ACK byte -- aborting! ==> Status word: ffff * Testing SELECT: Selecting DF_GSM SIM-T0: Transceiving APDU-Header: (a0 a4 00 00 02) SIM-ISR: Interrupt caught: Waiting for character to transmit... SIM-ISR: Interrupt caught: Waiting for character to transmit... SIM-ISR: Interrupt caught: Waiting for character to transmit... At this point it hangs "forever" - well at least half hour.

13 years, 7 months

Problems while building osmocomBB

by Begerad Stefan

Hi guys, I dunno if that is the right place for my concern about building the osmocomBB source. Here is what I already have done: - downloading the sources for osmocomBB and GNU toolchain for ARM, - setting the PATH for the arm-elf-* executables, - calling make in the src directory. Now, this appears as response of the make command in the terminal: cd shared/libosmocore/build-host && ../configure configure: error: cannot find install-sh, install.sh, or shtool in ".." "../.." "../../.." make: *** [shared/libosmocore/build-host/Makefile] Error 1. If you need details about my system, you can look at the following snippet from the config.log file: This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by libosmocore configure UNKNOWN, which was generated by GNU Autoconf 2.65. Invocation command line was $ ../configure ## --------- ## ## Platform. ## ## --------- ## hostname = ubuntu-stefan uname -m = x86_64 uname -r = 2.6.32-24-generic uname -s = Linux uname -v = #41-Ubuntu SMP Thu Aug 19 01:38:40 UTC 2010 /usr/bin/uname -p = unknown /bin/uname -X = unknown /bin/arch = unknown /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /usr/local/sbin PATH: /usr/local/bin PATH: /usr/sbin PATH: /usr/bin PATH: /sbin PATH: /bin PATH: /usr/games PATH: /home/stefan/osmocomBB/gnuarm-4.0.2/bin ## ----------- ## ## Core tests. ## ## ----------- ## configure:2032: error: cannot find install-sh, install.sh, or shtool in ".." "../.." "../../..". So, I would be very glad, if someone could give me a hint to solve the problem. Thank you in advance. Regards, begy

13 years, 8 months

Build fails on OSX Lion

by Martin Auer

Hi, when I try to build osmocombb on OSX Lion with MacPorts it fails because it cannot find linux/serial.h. I think it is needed to set some data rate for RS232? Is there a way to overcome this for OSX? Thanks in advance, Martin ../../src/serial.c:41:26: error: linux/serial.h: No such file or directory bash-3.2# make -e CROSS_TOOL_PREFIX=arm-elf-gcc-4.6 cd shared/libosmocore && autoreconf -i glibtoolize: putting auxiliary files in `.'. glibtoolize: copying file `./ltmain.sh' glibtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. glibtoolize: copying file `m4/libtool.m4' glibtoolize: copying file `m4/ltoptions.m4' glibtoolize: copying file `m4/ltsugar.m4' glibtoolize: copying file `m4/ltversion.m4' glibtoolize: copying file `m4/lt~obsolete.m4' configure.ac:14: installing `./config.sub' configure.ac:5: installing `./missing' configure.ac:5: installing `./install-sh' configure.ac:14: installing `./config.guess' src/Makefile.am: installing `./depcomp' mkdir shared/libosmocore/build-target cd shared/libosmocore/build-target && ../configure \ --host=arm-elf --enable-embedded --disable-shared \ --disable-tests ac_cv_header_sys_select_h=no \ --disable-tests ac_cv_header_sys_socket_h=no \ CFLAGS="-Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs" configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ../install-sh -c -d checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking whether make sets $(MAKE)... yes checking for arm-elf-strip... arm-elf-strip checking whether make sets $(MAKE)... (cached) yes checking for arm-elf-gcc... arm-elf-gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... yes checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether arm-elf-gcc accepts -g... yes checking for arm-elf-gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of arm-elf-gcc... gcc3 checking for a BSD-compatible install... /usr/bin/install -c checking build system type... i386-apple-darwin11.1.0 checking host system type... arm-unknown-elf checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by arm-elf-gcc... /Volumes/Speicher/opt/local/arm-elf/bin/ld checking if the linker (/Volumes/Speicher/opt/local/arm-elf/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /opt/local/bin//arm-elf-nm -B checking the name lister (/opt/local/bin//arm-elf-nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 196608 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /Volumes/Speicher/opt/local/arm-elf/bin/ld option to reload object files... -r checking for arm-elf-objdump... arm-elf-objdump checking how to recognize dependent libraries... unknown checking for arm-elf-ar... arm-elf-ar checking for arm-elf-strip... (cached) arm-elf-strip checking for arm-elf-ranlib... arm-elf-ranlib checking command to parse /opt/local/bin//arm-elf-nm -B output from arm-elf-gcc object... ok checking how to run the C preprocessor... arm-elf-gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... no checking for objdir... .libs checking if arm-elf-gcc supports -fno-rtti -fno-exceptions... no checking for arm-elf-gcc option to produce PIC... -fPIC -DPIC checking if arm-elf-gcc PIC flag -fPIC -DPIC works... yes checking if arm-elf-gcc static flag -static works... yes checking if arm-elf-gcc supports -c -o file.o... yes checking if arm-elf-gcc supports -c -o file.o... (cached) yes checking whether the arm-elf-gcc linker (/Volumes/Speicher/opt/local/arm-elf/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... no checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... no checking whether to build shared libraries... no checking whether to build static libraries... yes checking for ANSI C header files... (cached) yes checking execinfo.h usability... no checking execinfo.h presence... no checking for execinfo.h... no checking for sys/select.h... (cached) no checking for sys/socket.h... (cached) no checking syslog.h usability... no checking syslog.h presence... no checking for syslog.h... no checking ctype.h usability... yes checking ctype.h presence... yes checking for ctype.h... yes checking for doxygen... false checking if arm-elf-gcc supports -fvisibility=hidden... yes configure: creating ./config.status config.status: creating libosmocore.pc config.status: creating libosmocodec.pc config.status: creating libosmovty.pc config.status: creating libosmogsm.pc config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/vty/Makefile config.status: creating include/osmocom/codec/Makefile config.status: creating include/osmocom/crypt/Makefile config.status: creating include/osmocom/gsm/Makefile config.status: creating include/osmocom/gsm/protocol/Makefile config.status: creating include/osmocom/core/Makefile config.status: creating include/Makefile config.status: creating src/Makefile config.status: creating src/vty/Makefile config.status: creating src/codec/Makefile config.status: creating src/gsm/Makefile config.status: creating tests/Makefile config.status: creating tests/timer/Makefile config.status: creating tests/sms/Makefile config.status: creating tests/msgfile/Makefile config.status: creating tests/ussd/Makefile config.status: creating tests/smscb/Makefile config.status: creating tests/bits/Makefile config.status: creating utils/Makefile config.status: creating Doxyfile.core config.status: creating Doxyfile.gsm config.status: creating Doxyfile.vty config.status: creating Doxyfile.codec config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands cd shared/libosmocore/build-target && make echo UNKNOWN > ../.version-t && mv ../.version-t ../.version make all-recursive Making all in include Making all in osmocom Making all in codec make[5]: Nothing to be done for `all'. Making all in crypt make[5]: Nothing to be done for `all'. Making all in gsm Making all in protocol make[6]: Nothing to be done for `all'. make[6]: Nothing to be done for `all-am'. Making all in core make[5]: Nothing to be done for `all'. make[5]: Nothing to be done for `all-am'. make[4]: Nothing to be done for `all-am'. Making all in src Making all in . /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT timer.lo -MD -MP -MF .deps/timer.Tpo -c -o timer.lo ../../src/timer.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT timer.lo -MD -MP -MF .deps/timer.Tpo -c ../../src/timer.c -o timer.o mv -f .deps/timer.Tpo .deps/timer.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT select.lo -MD -MP -MF .deps/select.Tpo -c -o select.lo ../../src/select.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT select.lo -MD -MP -MF .deps/select.Tpo -c ../../src/select.c -o select.o mv -f .deps/select.Tpo .deps/select.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT signal.lo -MD -MP -MF .deps/signal.Tpo -c -o signal.lo ../../src/signal.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT signal.lo -MD -MP -MF .deps/signal.Tpo -c ../../src/signal.c -o signal.o mv -f .deps/signal.Tpo .deps/signal.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT msgb.lo -MD -MP -MF .deps/msgb.Tpo -c -o msgb.lo ../../src/msgb.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT msgb.lo -MD -MP -MF .deps/msgb.Tpo -c ../../src/msgb.c -o msgb.o mv -f .deps/msgb.Tpo .deps/msgb.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT bits.lo -MD -MP -MF .deps/bits.Tpo -c -o bits.lo ../../src/bits.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT bits.lo -MD -MP -MF .deps/bits.Tpo -c ../../src/bits.c -o bits.o mv -f .deps/bits.Tpo .deps/bits.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT bitvec.lo -MD -MP -MF .deps/bitvec.Tpo -c -o bitvec.lo ../../src/bitvec.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT bitvec.lo -MD -MP -MF .deps/bitvec.Tpo -c ../../src/bitvec.c -o bitvec.o mv -f .deps/bitvec.Tpo .deps/bitvec.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT statistics.lo -MD -MP -MF .deps/statistics.Tpo -c -o statistics.lo ../../src/statistics.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT statistics.lo -MD -MP -MF .deps/statistics.Tpo -c ../../src/statistics.c -o statistics.o ../../src/statistics.c: In function 'osmo_counter_get_by_name': ../../src/statistics.c:72:3: warning: implicit declaration of function 'strcmp' [-Wimplicit-function-declaration] mv -f .deps/statistics.Tpo .deps/statistics.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT write_queue.lo -MD -MP -MF .deps/write_queue.Tpo -c -o write_queue.lo ../../src/write_queue.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT write_queue.lo -MD -MP -MF .deps/write_queue.Tpo -c ../../src/write_queue.c -o write_queue.o mv -f .deps/write_queue.Tpo .deps/write_queue.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT utils.lo -MD -MP -MF .deps/utils.Tpo -c -o utils.lo ../../src/utils.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT utils.lo -MD -MP -MF .deps/utils.Tpo -c ../../src/utils.c -o utils.o ../../src/utils.c: In function 'get_value_string': ../../src/utils.c:33:2: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'uint32_t' [-Wformat] ../../src/utils.c: In function 'get_string_value': ../../src/utils.c:49:3: warning: implicit declaration of function 'strcasecmp' [-Wimplicit-function-declaration] mv -f .deps/utils.Tpo .deps/utils.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT socket.lo -MD -MP -MF .deps/socket.Tpo -c -o socket.lo ../../src/socket.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT socket.lo -MD -MP -MF .deps/socket.Tpo -c ../../src/socket.c -o socket.o mv -f .deps/socket.Tpo .deps/socket.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT logging.lo -MD -MP -MF .deps/logging.Tpo -c -o logging.lo ../../src/logging.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT logging.lo -MD -MP -MF .deps/logging.Tpo -c ../../src/logging.c -o logging.o ../../src/logging.c: In function 'log_parse_category_mask': ../../src/logging.c:162:2: warning: implicit declaration of function 'strdup' [-Wimplicit-function-declaration] ../../src/logging.c:162:15: warning: incompatible implicit declaration of built-in function 'strdup' [enabled by default] ../../src/logging.c:169:2: warning: implicit declaration of function 'strtok' [-Wimplicit-function-declaration] ../../src/logging.c:169:17: warning: assignment makes pointer from integer without a cast [enabled by default] ../../src/logging.c:172:4: warning: implicit declaration of function 'strstr' [-Wimplicit-function-declaration] ../../src/logging.c:172:18: warning: incompatible implicit declaration of built-in function 'strstr' [enabled by default] ../../src/logging.c:197:27: warning: assignment makes pointer from integer without a cast [enabled by default] ../../src/logging.c: In function '_file_output': ../../src/logging.c:427:2: warning: implicit declaration of function 'fprintf' [-Wimplicit-function-declaration] ../../src/logging.c:427:2: warning: incompatible implicit declaration of built-in function 'fprintf' [enabled by default] ../../src/logging.c:428:2: warning: implicit declaration of function 'fflush' [-Wimplicit-function-declaration] ../../src/logging.c: In function 'log_target_create_file': ../../src/logging.c:500:2: warning: implicit declaration of function 'fopen' [-Wimplicit-function-declaration] ../../src/logging.c:500:23: warning: assignment makes pointer from integer without a cast [enabled by default] ../../src/logging.c: In function 'log_target_find': ../../src/logging.c:524:4: warning: implicit declaration of function 'strcmp' [-Wimplicit-function-declaration] ../../src/logging.c: In function 'log_target_destroy': ../../src/logging.c:546:4: warning: implicit declaration of function 'fclose' [-Wimplicit-function-declaration] ../../src/logging.c: In function 'log_target_file_reopen': ../../src/logging.c:559:23: warning: assignment makes pointer from integer without a cast [enabled by default] mv -f .deps/logging.Tpo .deps/logging.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT logging_syslog.lo -MD -MP -MF .deps/logging_syslog.Tpo -c -o logging_syslog.lo ../../src/logging_syslog.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT logging_syslog.lo -MD -MP -MF .deps/logging_syslog.Tpo -c ../../src/logging_syslog.c -o logging_syslog.o mv -f .deps/logging_syslog.Tpo .deps/logging_syslog.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT rate_ctr.lo -MD -MP -MF .deps/rate_ctr.Tpo -c -o rate_ctr.lo ../../src/rate_ctr.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT rate_ctr.lo -MD -MP -MF .deps/rate_ctr.Tpo -c ../../src/rate_ctr.c -o rate_ctr.o ../../src/rate_ctr.c: In function 'rate_ctr_get_group_by_name_idx': ../../src/rate_ctr.c:153:3: warning: implicit declaration of function 'strcmp' [-Wimplicit-function-declaration] mv -f .deps/rate_ctr.Tpo .deps/rate_ctr.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsmtap_util.lo -MD -MP -MF .deps/gsmtap_util.Tpo -c -o gsmtap_util.lo ../../src/gsmtap_util.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsmtap_util.lo -MD -MP -MF .deps/gsmtap_util.Tpo -c ../../src/gsmtap_util.c -o gsmtap_util.o mv -f .deps/gsmtap_util.Tpo .deps/gsmtap_util.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT crc16.lo -MD -MP -MF .deps/crc16.Tpo -c -o crc16.lo ../../src/crc16.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT crc16.lo -MD -MP -MF .deps/crc16.Tpo -c ../../src/crc16.c -o crc16.o mv -f .deps/crc16.Tpo .deps/crc16.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT panic.lo -MD -MP -MF .deps/panic.Tpo -c -o panic.lo ../../src/panic.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT panic.lo -MD -MP -MF .deps/panic.Tpo -c ../../src/panic.c -o panic.o mv -f .deps/panic.Tpo .deps/panic.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT backtrace.lo -MD -MP -MF .deps/backtrace.Tpo -c -o backtrace.lo ../../src/backtrace.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT backtrace.lo -MD -MP -MF .deps/backtrace.Tpo -c ../../src/backtrace.c -o backtrace.o mv -f .deps/backtrace.Tpo .deps/backtrace.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT conv.lo -MD -MP -MF .deps/conv.Tpo -c -o conv.lo ../../src/conv.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT conv.lo -MD -MP -MF .deps/conv.Tpo -c ../../src/conv.c -o conv.o mv -f .deps/conv.Tpo .deps/conv.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT application.lo -MD -MP -MF .deps/application.Tpo -c -o application.lo ../../src/application.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT application.lo -MD -MP -MF .deps/application.Tpo -c ../../src/application.c -o application.o mv -f .deps/application.Tpo .deps/application.Plo /bin/sh ../libtool --tag=CC --mode=link arm-elf-gcc -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -version-info 2:0:0 -o libosmocore.la -rpath /usr/local/lib timer.lo select.lo signal.lo msgb.lo bits.lo bitvec.lo statistics.lo write_queue.lo utils.lo socket.lo logging.lo logging_syslog.lo rate_ctr.lo gsmtap_util.lo crc16.lo panic.lo backtrace.lo conv.lo application.lo libtool: link: arm-elf-ar cru .libs/libosmocore.a timer.o select.o signal.o msgb.o bits.o bitvec.o statistics.o write_queue.o utils.o socket.o logging.o logging_syslog.o rate_ctr.o gsmtap_util.o crc16.o panic.o backtrace.o conv.o application.o libtool: link: arm-elf-ranlib .libs/libosmocore.a libtool: link: ( cd ".libs" && rm -f "libosmocore.la" && ln -s "../libosmocore.la" "libosmocore.la" ) Making all in vty make[4]: Nothing to be done for `all'. Making all in codec /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/codec -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm610.lo -MD -MP -MF .deps/gsm610.Tpo -c -o gsm610.lo ../../../src/codec/gsm610.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/codec -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm610.lo -MD -MP -MF .deps/gsm610.Tpo -c ../../../src/codec/gsm610.c -o gsm610.o mv -f .deps/gsm610.Tpo .deps/gsm610.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/codec -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm620.lo -MD -MP -MF .deps/gsm620.Tpo -c -o gsm620.lo ../../../src/codec/gsm620.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/codec -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm620.lo -MD -MP -MF .deps/gsm620.Tpo -c ../../../src/codec/gsm620.c -o gsm620.o mv -f .deps/gsm620.Tpo .deps/gsm620.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/codec -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm660.lo -MD -MP -MF .deps/gsm660.Tpo -c -o gsm660.lo ../../../src/codec/gsm660.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/codec -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm660.lo -MD -MP -MF .deps/gsm660.Tpo -c ../../../src/codec/gsm660.c -o gsm660.o mv -f .deps/gsm660.Tpo .deps/gsm660.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/codec -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm690.lo -MD -MP -MF .deps/gsm690.Tpo -c -o gsm690.lo ../../../src/codec/gsm690.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/codec -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm690.lo -MD -MP -MF .deps/gsm690.Tpo -c ../../../src/codec/gsm690.c -o gsm690.o mv -f .deps/gsm690.Tpo .deps/gsm690.Plo /bin/sh ../../libtool --tag=CC --mode=link arm-elf-gcc -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -o libosmocodec.la -rpath /usr/local/lib gsm610.lo gsm620.lo gsm660.lo gsm690.lo libtool: link: arm-elf-ar cru .libs/libosmocodec.a gsm610.o gsm620.o gsm660.o gsm690.o libtool: link: arm-elf-ranlib .libs/libosmocodec.a libtool: link: ( cd ".libs" && rm -f "libosmocodec.la" && ln -s "../libosmocodec.la" "libosmocodec.la" ) Making all in gsm /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT a5.lo -MD -MP -MF .deps/a5.Tpo -c -o a5.lo ../../../src/gsm/a5.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT a5.lo -MD -MP -MF .deps/a5.Tpo -c ../../../src/gsm/a5.c -o a5.o mv -f .deps/a5.Tpo .deps/a5.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT rxlev_stat.lo -MD -MP -MF .deps/rxlev_stat.Tpo -c -o rxlev_stat.lo ../../../src/gsm/rxlev_stat.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT rxlev_stat.lo -MD -MP -MF .deps/rxlev_stat.Tpo -c ../../../src/gsm/rxlev_stat.c -o rxlev_stat.o mv -f .deps/rxlev_stat.Tpo .deps/rxlev_stat.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT tlv_parser.lo -MD -MP -MF .deps/tlv_parser.Tpo -c -o tlv_parser.lo ../../../src/gsm/tlv_parser.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT tlv_parser.lo -MD -MP -MF .deps/tlv_parser.Tpo -c ../../../src/gsm/tlv_parser.c -o tlv_parser.o mv -f .deps/tlv_parser.Tpo .deps/tlv_parser.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT comp128.lo -MD -MP -MF .deps/comp128.Tpo -c -o comp128.lo ../../../src/gsm/comp128.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT comp128.lo -MD -MP -MF .deps/comp128.Tpo -c ../../../src/gsm/comp128.c -o comp128.o mv -f .deps/comp128.Tpo .deps/comp128.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm_utils.lo -MD -MP -MF .deps/gsm_utils.Tpo -c -o gsm_utils.lo ../../../src/gsm/gsm_utils.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm_utils.lo -MD -MP -MF .deps/gsm_utils.Tpo -c ../../../src/gsm/gsm_utils.c -o gsm_utils.o ../../../src/gsm/gsm_utils.c: In function 'gsm_7bit_encode': ../../../src/gsm/gsm_utils.c:253:13: warning: variable 'z' set but not used [-Wunused-but-set-variable] mv -f .deps/gsm_utils.Tpo .deps/gsm_utils.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT rsl.lo -MD -MP -MF .deps/rsl.Tpo -c -o rsl.lo ../../../src/gsm/rsl.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT rsl.lo -MD -MP -MF .deps/rsl.Tpo -c ../../../src/gsm/rsl.c -o rsl.o mv -f .deps/rsl.Tpo .deps/rsl.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm48.lo -MD -MP -MF .deps/gsm48.Tpo -c -o gsm48.lo ../../../src/gsm/gsm48.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm48.lo -MD -MP -MF .deps/gsm48.Tpo -c ../../../src/gsm/gsm48.c -o gsm48.o ../../../src/gsm/gsm48.c: In function 'gsm48_mi_to_string': ../../../src/gsm/gsm48.c:348:4: warning: format '%u' expects argument of type 'unsigned int', but argument 4 has type 'uint32_t' [-Wformat] mv -f .deps/gsm48.Tpo .deps/gsm48.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm48_ie.lo -MD -MP -MF .deps/gsm48_ie.Tpo -c -o gsm48_ie.lo ../../../src/gsm/gsm48_ie.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm48_ie.lo -MD -MP -MF .deps/gsm48_ie.Tpo -c ../../../src/gsm/gsm48_ie.c -o gsm48_ie.o mv -f .deps/gsm48_ie.Tpo .deps/gsm48_ie.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm0808.lo -MD -MP -MF .deps/gsm0808.Tpo -c -o gsm0808.lo ../../../src/gsm/gsm0808.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm0808.lo -MD -MP -MF .deps/gsm0808.Tpo -c ../../../src/gsm/gsm0808.c -o gsm0808.o mv -f .deps/gsm0808.Tpo .deps/gsm0808.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT sysinfo.lo -MD -MP -MF .deps/sysinfo.Tpo -c -o sysinfo.lo ../../../src/gsm/sysinfo.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT sysinfo.lo -MD -MP -MF .deps/sysinfo.Tpo -c ../../../src/gsm/sysinfo.c -o sysinfo.o mv -f .deps/sysinfo.Tpo .deps/sysinfo.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gprs_cipher_core.lo -MD -MP -MF .deps/gprs_cipher_core.Tpo -c -o gprs_cipher_core.lo ../../../src/gsm/gprs_cipher_core.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gprs_cipher_core.lo -MD -MP -MF .deps/gprs_cipher_core.Tpo -c ../../../src/gsm/gprs_cipher_core.c -o gprs_cipher_core.o mv -f .deps/gprs_cipher_core.Tpo .deps/gprs_cipher_core.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm0480.lo -MD -MP -MF .deps/gsm0480.Tpo -c -o gsm0480.lo ../../../src/gsm/gsm0480.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm0480.lo -MD -MP -MF .deps/gsm0480.Tpo -c ../../../src/gsm/gsm0480.c -o gsm0480.o ../../../src/gsm/gsm0480.c: In function 'parse_process_uss_req': ../../../src/gsm/gsm0480.c:405:7: warning: pointer targets in passing argument 1 of 'gsm_7bit_decode' differ in signedness [-Wpointer-sign] ../../../include/osmocom/gsm/gsm_utils.h:59:5: note: expected 'char *' but argument is of type 'uint8_t *' mv -f .deps/gsm0480.Tpo .deps/gsm0480.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT abis_nm.lo -MD -MP -MF .deps/abis_nm.Tpo -c -o abis_nm.lo ../../../src/gsm/abis_nm.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT abis_nm.lo -MD -MP -MF .deps/abis_nm.Tpo -c ../../../src/gsm/abis_nm.c -o abis_nm.o mv -f .deps/abis_nm.Tpo .deps/abis_nm.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm0502.lo -MD -MP -MF .deps/gsm0502.Tpo -c -o gsm0502.lo ../../../src/gsm/gsm0502.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm0502.lo -MD -MP -MF .deps/gsm0502.Tpo -c ../../../src/gsm/gsm0502.c -o gsm0502.o mv -f .deps/gsm0502.Tpo .deps/gsm0502.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT lapdm.lo -MD -MP -MF .deps/lapdm.Tpo -c -o lapdm.lo ../../../src/gsm/lapdm.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT lapdm.lo -MD -MP -MF .deps/lapdm.Tpo -c ../../../src/gsm/lapdm.c -o lapdm.o ../../../src/gsm/lapdm.c: In function 'lapdm_t200_cb': ../../../src/gsm/lapdm.c:608:2: warning: format '%u' expects argument of type 'unsigned int', but argument 8 has type 'uint32_t' [-Wformat] ../../../src/gsm/lapdm.c:710:3: warning: format '%u' expects argument of type 'unsigned int', but argument 7 has type 'uint32_t' [-Wformat] ../../../src/gsm/lapdm.c: In function 'lapdm_rx_u': ../../../src/gsm/lapdm.c:1136:5: warning: implicit declaration of function 'memcmp' [-Wimplicit-function-declaration] ../../../src/gsm/lapdm.c: In function 'rslms_rx_rll_est_req': ../../../src/gsm/lapdm.c:1800:12: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] ../../../src/gsm/lapdm.c: In function 'rslms_rx_rll_udata_req': ../../../src/gsm/lapdm.c:1892:11: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] ../../../src/gsm/lapdm.c: In function 'rslms_rx_rll_data_req': ../../../src/gsm/lapdm.c:1934:11: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] mv -f .deps/lapdm.Tpo .deps/lapdm.Plo /bin/sh ../../libtool --tag=CC --mode=link arm-elf-gcc -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -version-info 1:0:0 -o libosmogsm.la -rpath /usr/local/lib a5.lo rxlev_stat.lo tlv_parser.lo comp128.lo gsm_utils.lo rsl.lo gsm48.lo gsm48_ie.lo gsm0808.lo sysinfo.lo gprs_cipher_core.lo gsm0480.lo abis_nm.lo gsm0502.lo lapdm.lo ../../src/libosmocore.la libtool: link: arm-elf-ar cru .libs/libosmogsm.a a5.o rxlev_stat.o tlv_parser.o comp128.o gsm_utils.o rsl.o gsm48.o gsm48_ie.o gsm0808.o sysinfo.o gprs_cipher_core.o gsm0480.o abis_nm.o gsm0502.o lapdm.o libtool: link: arm-elf-ranlib .libs/libosmogsm.a libtool: link: ( cd ".libs" && rm -f "libosmogsm.la" && ln -s "../libosmogsm.la" "libosmogsm.la" ) Making all in tests make[4]: Nothing to be done for `all-am'. Making all in utils make[3]: Nothing to be done for `all'. make[3]: Nothing to be done for `all-am'. mkdir shared/libosmocore/build-host cd shared/libosmocore/build-host && ../configure checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ../install-sh -c -d checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking whether make sets $(MAKE)... yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking for a BSD-compatible install... /usr/bin/install -c checking build system type... i386-apple-darwin11.1.0 checking host system type... i386-apple-darwin11.1.0 checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld checking if the linker (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) is GNU ld... no checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm checking the name lister (/usr/bin/nm) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 196608 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld option to reload object files... -r checking for objdump... no checking how to recognize dependent libraries... pass_all checking for ar... ar checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm output from gcc object... ok checking for dsymutil... dsymutil checking for nmedit... nmedit checking for lipo... lipo checking for otool... otool checking for otool64... no checking for -single_module linker flag... yes checking for -exported_symbols_list linker flag... yes checking for -force_load linker flag... yes checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fno-common -DPIC checking if gcc PIC flag -fno-common -DPIC works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) supports shared libraries... yes checking dynamic linker characteristics... darwin11.1.0 dyld checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for ANSI C header files... (cached) yes checking execinfo.h usability... yes checking execinfo.h presence... yes checking for execinfo.h... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking syslog.h usability... yes checking syslog.h presence... yes checking for syslog.h... yes checking ctype.h usability... yes checking ctype.h presence... yes checking for ctype.h... yes checking for doxygen... false checking if gcc supports -fvisibility=hidden... yes configure: creating ./config.status config.status: creating libosmocore.pc config.status: creating libosmocodec.pc config.status: creating libosmovty.pc config.status: creating libosmogsm.pc config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/vty/Makefile config.status: creating include/osmocom/codec/Makefile config.status: creating include/osmocom/crypt/Makefile config.status: creating include/osmocom/gsm/Makefile config.status: creating include/osmocom/gsm/protocol/Makefile config.status: creating include/osmocom/core/Makefile config.status: creating include/Makefile config.status: creating src/Makefile config.status: creating src/vty/Makefile config.status: creating src/codec/Makefile config.status: creating src/gsm/Makefile config.status: creating tests/Makefile config.status: creating tests/timer/Makefile config.status: creating tests/sms/Makefile config.status: creating tests/msgfile/Makefile config.status: creating tests/ussd/Makefile config.status: creating tests/smscb/Makefile config.status: creating tests/bits/Makefile config.status: creating utils/Makefile config.status: creating Doxyfile.core config.status: creating Doxyfile.gsm config.status: creating Doxyfile.vty config.status: creating Doxyfile.codec config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands cd shared/libosmocore/build-host && make make all-recursive Making all in include Making all in osmocom Making all in vty make[5]: Nothing to be done for `all'. Making all in codec make[5]: Nothing to be done for `all'. Making all in crypt make[5]: Nothing to be done for `all'. Making all in gsm Making all in protocol make[6]: Nothing to be done for `all'. make[6]: Nothing to be done for `all-am'. Making all in core make[5]: Nothing to be done for `all'. make[5]: Nothing to be done for `all-am'. make[4]: Nothing to be done for `all-am'. Making all in src Making all in . /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT timer.lo -MD -MP -MF .deps/timer.Tpo -c -o timer.lo ../../src/timer.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT timer.lo -MD -MP -MF .deps/timer.Tpo -c ../../src/timer.c -fno-common -DPIC -o .libs/timer.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT timer.lo -MD -MP -MF .deps/timer.Tpo -c ../../src/timer.c -o timer.o >/dev/null 2>&1 mv -f .deps/timer.Tpo .deps/timer.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT select.lo -MD -MP -MF .deps/select.Tpo -c -o select.lo ../../src/select.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT select.lo -MD -MP -MF .deps/select.Tpo -c ../../src/select.c -fno-common -DPIC -o .libs/select.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT select.lo -MD -MP -MF .deps/select.Tpo -c ../../src/select.c -o select.o >/dev/null 2>&1 mv -f .deps/select.Tpo .deps/select.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT signal.lo -MD -MP -MF .deps/signal.Tpo -c -o signal.lo ../../src/signal.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT signal.lo -MD -MP -MF .deps/signal.Tpo -c ../../src/signal.c -fno-common -DPIC -o .libs/signal.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT signal.lo -MD -MP -MF .deps/signal.Tpo -c ../../src/signal.c -o signal.o >/dev/null 2>&1 mv -f .deps/signal.Tpo .deps/signal.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT msgb.lo -MD -MP -MF .deps/msgb.Tpo -c -o msgb.lo ../../src/msgb.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT msgb.lo -MD -MP -MF .deps/msgb.Tpo -c ../../src/msgb.c -fno-common -DPIC -o .libs/msgb.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT msgb.lo -MD -MP -MF .deps/msgb.Tpo -c ../../src/msgb.c -o msgb.o >/dev/null 2>&1 mv -f .deps/msgb.Tpo .deps/msgb.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT bits.lo -MD -MP -MF .deps/bits.Tpo -c -o bits.lo ../../src/bits.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT bits.lo -MD -MP -MF .deps/bits.Tpo -c ../../src/bits.c -fno-common -DPIC -o .libs/bits.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT bits.lo -MD -MP -MF .deps/bits.Tpo -c ../../src/bits.c -o bits.o >/dev/null 2>&1 mv -f .deps/bits.Tpo .deps/bits.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT bitvec.lo -MD -MP -MF .deps/bitvec.Tpo -c -o bitvec.lo ../../src/bitvec.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT bitvec.lo -MD -MP -MF .deps/bitvec.Tpo -c ../../src/bitvec.c -fno-common -DPIC -o .libs/bitvec.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT bitvec.lo -MD -MP -MF .deps/bitvec.Tpo -c ../../src/bitvec.c -o bitvec.o >/dev/null 2>&1 mv -f .deps/bitvec.Tpo .deps/bitvec.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT statistics.lo -MD -MP -MF .deps/statistics.Tpo -c -o statistics.lo ../../src/statistics.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT statistics.lo -MD -MP -MF .deps/statistics.Tpo -c ../../src/statistics.c -fno-common -DPIC -o .libs/statistics.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT statistics.lo -MD -MP -MF .deps/statistics.Tpo -c ../../src/statistics.c -o statistics.o >/dev/null 2>&1 mv -f .deps/statistics.Tpo .deps/statistics.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT write_queue.lo -MD -MP -MF .deps/write_queue.Tpo -c -o write_queue.lo ../../src/write_queue.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT write_queue.lo -MD -MP -MF .deps/write_queue.Tpo -c ../../src/write_queue.c -fno-common -DPIC -o .libs/write_queue.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT write_queue.lo -MD -MP -MF .deps/write_queue.Tpo -c ../../src/write_queue.c -o write_queue.o >/dev/null 2>&1 mv -f .deps/write_queue.Tpo .deps/write_queue.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT utils.lo -MD -MP -MF .deps/utils.Tpo -c -o utils.lo ../../src/utils.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT utils.lo -MD -MP -MF .deps/utils.Tpo -c ../../src/utils.c -fno-common -DPIC -o .libs/utils.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT utils.lo -MD -MP -MF .deps/utils.Tpo -c ../../src/utils.c -o utils.o >/dev/null 2>&1 mv -f .deps/utils.Tpo .deps/utils.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT socket.lo -MD -MP -MF .deps/socket.Tpo -c -o socket.lo ../../src/socket.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT socket.lo -MD -MP -MF .deps/socket.Tpo -c ../../src/socket.c -fno-common -DPIC -o .libs/socket.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT socket.lo -MD -MP -MF .deps/socket.Tpo -c ../../src/socket.c -o socket.o >/dev/null 2>&1 mv -f .deps/socket.Tpo .deps/socket.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT logging.lo -MD -MP -MF .deps/logging.Tpo -c -o logging.lo ../../src/logging.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT logging.lo -MD -MP -MF .deps/logging.Tpo -c ../../src/logging.c -fno-common -DPIC -o .libs/logging.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT logging.lo -MD -MP -MF .deps/logging.Tpo -c ../../src/logging.c -o logging.o >/dev/null 2>&1 mv -f .deps/logging.Tpo .deps/logging.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT logging_syslog.lo -MD -MP -MF .deps/logging_syslog.Tpo -c -o logging_syslog.lo ../../src/logging_syslog.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT logging_syslog.lo -MD -MP -MF .deps/logging_syslog.Tpo -c ../../src/logging_syslog.c -fno-common -DPIC -o .libs/logging_syslog.o ../../src/logging_syslog.c:47: warning: type qualifiers ignored on function return type libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT logging_syslog.lo -MD -MP -MF .deps/logging_syslog.Tpo -c ../../src/logging_syslog.c -o logging_syslog.o >/dev/null 2>&1 mv -f .deps/logging_syslog.Tpo .deps/logging_syslog.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT rate_ctr.lo -MD -MP -MF .deps/rate_ctr.Tpo -c -o rate_ctr.lo ../../src/rate_ctr.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT rate_ctr.lo -MD -MP -MF .deps/rate_ctr.Tpo -c ../../src/rate_ctr.c -fno-common -DPIC -o .libs/rate_ctr.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT rate_ctr.lo -MD -MP -MF .deps/rate_ctr.Tpo -c ../../src/rate_ctr.c -o rate_ctr.o >/dev/null 2>&1 mv -f .deps/rate_ctr.Tpo .deps/rate_ctr.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT gsmtap_util.lo -MD -MP -MF .deps/gsmtap_util.Tpo -c -o gsmtap_util.lo ../../src/gsmtap_util.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT gsmtap_util.lo -MD -MP -MF .deps/gsmtap_util.Tpo -c ../../src/gsmtap_util.c -fno-common -DPIC -o .libs/gsmtap_util.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT gsmtap_util.lo -MD -MP -MF .deps/gsmtap_util.Tpo -c ../../src/gsmtap_util.c -o gsmtap_util.o >/dev/null 2>&1 mv -f .deps/gsmtap_util.Tpo .deps/gsmtap_util.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT crc16.lo -MD -MP -MF .deps/crc16.Tpo -c -o crc16.lo ../../src/crc16.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT crc16.lo -MD -MP -MF .deps/crc16.Tpo -c ../../src/crc16.c -fno-common -DPIC -o .libs/crc16.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT crc16.lo -MD -MP -MF .deps/crc16.Tpo -c ../../src/crc16.c -o crc16.o >/dev/null 2>&1 mv -f .deps/crc16.Tpo .deps/crc16.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT panic.lo -MD -MP -MF .deps/panic.Tpo -c -o panic.lo ../../src/panic.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT panic.lo -MD -MP -MF .deps/panic.Tpo -c ../../src/panic.c -fno-common -DPIC -o .libs/panic.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT panic.lo -MD -MP -MF .deps/panic.Tpo -c ../../src/panic.c -o panic.o >/dev/null 2>&1 mv -f .deps/panic.Tpo .deps/panic.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT backtrace.lo -MD -MP -MF .deps/backtrace.Tpo -c -o backtrace.lo ../../src/backtrace.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT backtrace.lo -MD -MP -MF .deps/backtrace.Tpo -c ../../src/backtrace.c -fno-common -DPIC -o .libs/backtrace.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT backtrace.lo -MD -MP -MF .deps/backtrace.Tpo -c ../../src/backtrace.c -o backtrace.o >/dev/null 2>&1 mv -f .deps/backtrace.Tpo .deps/backtrace.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT conv.lo -MD -MP -MF .deps/conv.Tpo -c -o conv.lo ../../src/conv.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT conv.lo -MD -MP -MF .deps/conv.Tpo -c ../../src/conv.c -fno-common -DPIC -o .libs/conv.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT conv.lo -MD -MP -MF .deps/conv.Tpo -c ../../src/conv.c -o conv.o >/dev/null 2>&1 mv -f .deps/conv.Tpo .deps/conv.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT application.lo -MD -MP -MF .deps/application.Tpo -c -o application.lo ../../src/application.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT application.lo -MD -MP -MF .deps/application.Tpo -c ../../src/application.c -fno-common -DPIC -o .libs/application.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT application.lo -MD -MP -MF .deps/application.Tpo -c ../../src/application.c -o application.o >/dev/null 2>&1 mv -f .deps/application.Tpo .deps/application.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT plugin.lo -MD -MP -MF .deps/plugin.Tpo -c -o plugin.lo ../../src/plugin.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT plugin.lo -MD -MP -MF .deps/plugin.Tpo -c ../../src/plugin.c -fno-common -DPIC -o .libs/plugin.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT plugin.lo -MD -MP -MF .deps/plugin.Tpo -c ../../src/plugin.c -o plugin.o >/dev/null 2>&1 mv -f .deps/plugin.Tpo .deps/plugin.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT talloc.lo -MD -MP -MF .deps/talloc.Tpo -c -o talloc.lo ../../src/talloc.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT talloc.lo -MD -MP -MF .deps/talloc.Tpo -c ../../src/talloc.c -fno-common -DPIC -o .libs/talloc.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT talloc.lo -MD -MP -MF .deps/talloc.Tpo -c ../../src/talloc.c -o talloc.o >/dev/null 2>&1 mv -f .deps/talloc.Tpo .deps/talloc.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT msgfile.lo -MD -MP -MF .deps/msgfile.Tpo -c -o msgfile.lo ../../src/msgfile.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT msgfile.lo -MD -MP -MF .deps/msgfile.Tpo -c ../../src/msgfile.c -fno-common -DPIC -o .libs/msgfile.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT msgfile.lo -MD -MP -MF .deps/msgfile.Tpo -c ../../src/msgfile.c -o msgfile.o >/dev/null 2>&1 mv -f .deps/msgfile.Tpo .deps/msgfile.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT serial.lo -MD -MP -MF .deps/serial.Tpo -c -o serial.lo ../../src/serial.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT serial.lo -MD -MP -MF .deps/serial.Tpo -c ../../src/serial.c -fno-common -DPIC -o .libs/serial.o ../../src/serial.c:41:26: error: linux/serial.h: No such file or directory ../../src/serial.c: In function 'osmo_serial_set_custom_baudrate': ../../src/serial.c:159: error: storage size of 'ser_info' isn't known ../../src/serial.c:161: error: 'TIOCGSERIAL' undeclared (first use in this function) ../../src/serial.c:161: error: (Each undeclared identifier is reported only once ../../src/serial.c:161: error: for each function it appears in.) ../../src/serial.c:167: error: 'ASYNC_SPD_CUST' undeclared (first use in this function) ../../src/serial.c:167: error: 'ASYNC_LOW_LATENCY' undeclared (first use in this function) ../../src/serial.c:170: error: 'TIOCSSERIAL' undeclared (first use in this function) ../../src/serial.c:159: warning: unused variable 'ser_info' ../../src/serial.c: In function 'osmo_serial_clear_custom_baudrate': ../../src/serial.c:189: error: storage size of 'ser_info' isn't known ../../src/serial.c:191: error: 'TIOCGSERIAL' undeclared (first use in this function) ../../src/serial.c:197: error: 'ASYNC_LOW_LATENCY' undeclared (first use in this function) ../../src/serial.c:200: error: 'TIOCSSERIAL' undeclared (first use in this function) ../../src/serial.c:189: warning: unused variable 'ser_info' make[4]: *** [serial.lo] Error 1 make[3]: *** [all-recursive] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all] Error 2 make: *** [shared/libosmocore/build-host/src/.libs/libosmocore.la] Error 2

13 years, 8 months

libosmocore patch to support custom baud rates on OS X

by Richard James

This patch should allow custom baud-rate setting to work on OS X; tested on Mac OS X 10.7 with a FT232BL-based adapter. diff --git a/src/shared/libosmocore/src/serial.c b/src/shared/libosmocore/src/serial.c index 26cf59d..d702153 100644 --- a/src/shared/libosmocore/src/serial.c +++ b/src/shared/libosmocore/src/serial.c @@ -38,8 +38,9 @@ #include <sys/ioctl.h> #include <sys/types.h> #include <sys/stat.h> +#ifdef __linux__ #include <linux/serial.h> - +#endif #include <osmocom/core/serial.h> @@ -155,6 +156,7 @@ osmo_serial_set_baudrate(int fd, speed_t baudrate) int osmo_serial_set_custom_baudrate(int fd, int baudrate) { +#ifdef __linux__ int rc; struct serial_struct ser_info; @@ -174,6 +176,23 @@ osmo_serial_set_custom_baudrate(int fd, int baudrate) } return _osmo_serial_set_baudrate(fd, B38400); /* 38400 is a kind of magic ... */ +#elsif defined(__APPLE__) +#ifndef IOSSIOSPEED +#define IOSSIOSPEED _IOW('T', 2, speed_t) +#endif + int rc; + + unsigned int speed = baudrate; + rc = ioctl(fd, IOSSIOSPEED, &speed); + if (rc < 0) { + dbg.perror("ioctl(IOSSIOSPEED)"); + return -errno; + } + return 0; +#else +#warning osmo_serial_set_custom_baudrate: unsupported platform + return 0; +#endif } /*! \brief Clear any custom baudrate @@ -186,6 +205,7 @@ int osmo_serial_clear_custom_baudrate(int fd) { int rc; +#ifdef __linux__ struct serial_struct ser_info; rc = ioctl(fd, TIOCGSERIAL, &ser_info); @@ -202,7 +222,7 @@ osmo_serial_clear_custom_baudrate(int fd) dbg_perror("ioctl(TIOCSSERIAL)"); return -errno; } - +#endif return 0; }

13 years, 9 months

R: Re: R: Layer23 missing

by Luca Bongiorni

Hi Bogdan, > I've used all types of phones and different networks - same result. If I capture the uplink then every time after a > few seconds I get "segmentation fault". My guess is that in a controlled environment it's going to work, but with a live one, where you have a > lot of arfcn (on a quick scan I get about 50 on my location) it's unlikely to work. well, the success could depends from many things: - wich cable are you using: FTDI or CP2102; - which phone you have tried: sometimes the jack on C1xx could be not so clean or used and it could create problems of communication at high baudrates. - the environment that you are using: public network, as i saw from my tests, is quite horrible to make tests (eg. arfcn hopping). Using a DP-L10 and modifying the AFC value, seems to work well on public netwroks, even if, sometimes it get stuck: problem related with channel hopping/sync IIRC. I used a Blackberry Test Field to disable EDGE and identify which ARFCN that doesn't hop on GPRS: ( eg. this one is hopping, others may not [1] ) Obviously a private and controlled environment could give you the full percentage of success. Regards, Luca [1] http://tinyurl.com/gprs-hopping

13 years, 9 months

Re: baseband-devel Digest, Vol 20, Issue 26

by Bogdan Alecu

Hi Luca, I've noticed the change and manual patched everything, but for me seems that it's not going to work. If I capture the downlink, sometimes it capture some bursts, other times not, but even so there is nothing to decode - the arfcn is correct. I've used all types of phones and different networks - same result. If I capture the uplink then every time after a few seconds I get "segmentation fault". My guess is that in a controlled environment it's going to work, but with a live one, where you have a lot of arfcn (on a quick scan I get about 50 on my location) it's unlikely to work. Bogdan ________________________________ From: "baseband-devel-request(a)lists.osmocom.org" <baseband-devel-request(a)lists.osmocom.org> To: baseband-devel(a)lists.osmocom.org Sent: Friday, September 30, 2011 1:00 PM Subject: baseband-devel Digest, Vol 20, Issue 26 ----- Forwarded Message ----- Send baseband-devel mailing list submissions to baseband-devel(a)lists.osmocom.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.osmocom.org/mailman/listinfo/baseband-devel or, via email, send a message with subject or body 'help' to baseband-devel-request(a)lists.osmocom.org You can reach the person managing the list at baseband-devel-owner(a)lists.osmocom.org When replying, please edit your Subject line so it is more specific than "Re: Contents of baseband-devel digest..." Today's Topics: 1. Layer23 missing (Bogdan Alecu) Hello, I'm trying to use the gprsdecode but when I try to patch it there is no layer3.c and also it can't find " d1cb8ea9b784c7acbafbb2fdcedbdf4655c2f6f5" in the tree. Can someone explain a little bit the new steps? Regards, Bogdan _______________________________________________ baseband-devel mailing list baseband-devel(a)lists.osmocom.org https://lists.osmocom.org/mailman/listinfo/baseband-devel

13 years, 9 months

Layer23 missing

by Bogdan Alecu

Hello, I'm trying to use the gprsdecode but when I try to patch it there is no layer3.c and also it can't find " d1cb8ea9b784c7acbafbb2fdcedbdf4655c2f6f5" in the tree. Can someone explain a little bit the new steps? Regards, Bogdan

13 years, 9 months

About sniff multi bursts in a frame, CCCH_CONF

by Aegean Chou

Hi, Sylvain Munaut Another method, same error, and i tried any _ONE_ ts, it's no problem. static const struct mframe_sched_item mf_ccch[] = { { .sched_set = SNIFF_CCCH0, .modulo = 51, .frame_nr = 6 }, { .sched_set = SNIFF_CCCH2, .modulo = 51, .frame_nr = 6 }, { .sched_set = SNIFF_CCCH4, .modulo = 51, .frame_nr = 6 }, { .sched_set = SNIFF_CCCH6, .modulo = 51, .frame_nr = 6 }, { .sched_set = SNIFF_CCCH0, .modulo = 51, .frame_nr = 12 }, { .sched_set = SNIFF_CCCH2, .modulo = 51, .frame_nr = 12 }, { .sched_set = SNIFF_CCCH4, .modulo = 51, .frame_nr = 12 }, { .sched_set = SNIFF_CCCH6, .modulo = 51, .frame_nr = 12 }, { .sched_set = SNIFF_CCCH0, .modulo = 51, .frame_nr = 16 }, { .sched_set = SNIFF_CCCH2, .modulo = 51, .frame_nr = 16 }, { .sched_set = SNIFF_CCCH4, .modulo = 51, .frame_nr = 16 }, { .sched_set = SNIFF_CCCH6, .modulo = 51, .frame_nr = 16 }, { .sched_set = SNIFF_CCCH0, .modulo = 51, .frame_nr = 22 }, { .sched_set = SNIFF_CCCH2, .modulo = 51, .frame_nr = 22 }, { .sched_set = SNIFF_CCCH4, .modulo = 51, .frame_nr = 22 }, { .sched_set = SNIFF_CCCH6, .modulo = 51, .frame_nr = 22 }, { .sched_set = SNIFF_CCCH0, .modulo = 51, .frame_nr = 26 }, { .sched_set = SNIFF_CCCH2, .modulo = 51, .frame_nr = 26 }, { .sched_set = SNIFF_CCCH4, .modulo = 51, .frame_nr = 26 }, { .sched_set = SNIFF_CCCH6, .modulo = 51, .frame_nr = 26 }, { .sched_set = SNIFF_CCCH0, .modulo = 51, .frame_nr = 32 }, { .sched_set = SNIFF_CCCH2, .modulo = 51, .frame_nr = 32 }, { .sched_set = SNIFF_CCCH4, .modulo = 51, .frame_nr = 32 }, { .sched_set = SNIFF_CCCH6, .modulo = 51, .frame_nr = 32 }, { .sched_set = SNIFF_CCCH0, .modulo = 51, .frame_nr = 36 }, { .sched_set = SNIFF_CCCH2, .modulo = 51, .frame_nr = 36 }, { .sched_set = SNIFF_CCCH4, .modulo = 51, .frame_nr = 36 }, { .sched_set = SNIFF_CCCH6, .modulo = 51, .frame_nr = 36 }, { .sched_set = SNIFF_CCCH0, .modulo = 51, .frame_nr = 42 }, { .sched_set = SNIFF_CCCH2, .modulo = 51, .frame_nr = 42 }, { .sched_set = SNIFF_CCCH4, .modulo = 51, .frame_nr = 42 }, { .sched_set = SNIFF_CCCH6, .modulo = 51, .frame_nr = 42 }, { .sched_set = SNIFF_CCCH0, .modulo = 51, .frame_nr = 46 }, { .sched_set = SNIFF_CCCH2, .modulo = 51, .frame_nr = 46 }, { .sched_set = SNIFF_CCCH4, .modulo = 51, .frame_nr = 46 }, { .sched_set = SNIFF_CCCH6, .modulo = 51, .frame_nr = 46 }, { .sched_set = NULL } }; const struct tdma_sched_item sniff_ccch0_sched_set[] = { SCHED_ITEM_DT(l1s_sniff_cmd, 0, 0, 0), SCHED_END_FRAME(), SCHED_ITEM_DT(l1s_sniff_cmd, 0, 0, 1), SCHED_END_FRAME(), SCHED_ITEM(l1s_sniff_resp, -5, 0, 0), SCHED_ITEM_DT(l1s_sniff_cmd, 0, 0, 2), SCHED_END_FRAME(), SCHED_ITEM(l1s_sniff_resp, -5, 0, 1), SCHED_ITEM_DT(l1s_sniff_cmd, 0, 0, 3), SCHED_END_FRAME(), SCHED_ITEM(l1s_sniff_resp, -5, 0, 2), SCHED_END_FRAME(), SCHED_ITEM(l1s_sniff_resp, -5, 0, 3), SCHED_END_FRAME(), SCHED_END_SET() }; const struct tdma_sched_item sniff_ccch2_sched_set[] = { SCHED_ITEM_DT(l1s_sniff_cmd, 0, 4, 0), SCHED_END_FRAME(), SCHED_ITEM_DT(l1s_sniff_cmd, 0, 4, 1), SCHED_END_FRAME(), SCHED_ITEM(l1s_sniff_resp, -5, 4, 0), SCHED_ITEM_DT(l1s_sniff_cmd, 0, 4, 2), SCHED_END_FRAME(), SCHED_ITEM(l1s_sniff_resp, -5, 4, 1), SCHED_ITEM_DT(l1s_sniff_cmd, 0, 4, 3), SCHED_END_FRAME(), SCHED_ITEM(l1s_sniff_resp, -5, 4, 2), SCHED_END_FRAME(), SCHED_ITEM(l1s_sniff_resp, -5, 4, 3), SCHED_END_FRAME(), SCHED_END_SET() }; const struct tdma_sched_item sniff_ccch4_sched_set[] = { SCHED_ITEM_DT(l1s_sniff_cmd, 0, 8, 0), SCHED_END_FRAME(), SCHED_ITEM_DT(l1s_sniff_cmd, 0, 8, 1), SCHED_END_FRAME(), SCHED_ITEM(l1s_sniff_resp, -5, 8, 0), SCHED_ITEM_DT(l1s_sniff_cmd, 0, 8, 2), SCHED_END_FRAME(), SCHED_ITEM(l1s_sniff_resp, -5, 8, 1), SCHED_ITEM_DT(l1s_sniff_cmd, 0, 8, 3), SCHED_END_FRAME(), SCHED_ITEM(l1s_sniff_resp, -5, 8, 2), SCHED_END_FRAME(), SCHED_ITEM(l1s_sniff_resp, -5, 8, 3), SCHED_END_FRAME(), SCHED_END_SET() }; const struct tdma_sched_item sniff_ccch6_sched_set[] = { SCHED_ITEM_DT(l1s_sniff_cmd, 0, 12, 0), SCHED_END_FRAME(), SCHED_ITEM_DT(l1s_sniff_cmd, 0, 12, 1), SCHED_END_FRAME(), SCHED_ITEM(l1s_sniff_resp, -5, 12, 0), SCHED_ITEM_DT(l1s_sniff_cmd, 0, 12, 2), SCHED_END_FRAME(), SCHED_ITEM(l1s_sniff_resp, -5, 12, 1), SCHED_ITEM_DT(l1s_sniff_cmd, 0, 12, 3), SCHED_END_FRAME(), SCHED_ITEM(l1s_sniff_resp, -5, 12, 2), SCHED_END_FRAME(), SCHED_ITEM(l1s_sniff_resp, -5, 12, 3), SCHED_END_FRAME(), SCHED_END_SET() }; ======= 2011-09-26 14:10:17 ======= >> the bts arround me uses MultiCCCH, it's CCCH_CONF = 110 (6), so it uses TS0, TS2, TS4 and TS6 in a frame for PCH/AGCH. > >Mmm ,interesting, I had never seen that option being used before. What >network is this. > >> but the burst_ind only CCCH-CONF 0 & 1 are supported, it can sniff TS0 only, so only catch 1/4 IMM ASS for me. >> my OWN phone, it's just not in TS0 (i use nokia netmonitor to check it), so i can't catch it at all (phones use IMSI to decide page group). > >Well, it's your own phone (or any known target phone), you know the >IMSI, hence the paging group ... > > >> i think the bottleneck is the DSP, as the DSP task (ALLC_DSP_TASK) can only process one TS of a frame (it's enough for phone), >> i think maybe backup/restore the DSP task variable patch needed, i'm new to the DSP disassemble and patch, anyone can help? thanks > >That's gonna be _very_ hard, the DSP uses _plenty_ of global variables ... > >But OTOH, instead of using the normal 'RX task', you can use the sniff >task to listen to the CCCH. The sniff task will _not_ do the channel >decoding (i.e. you'll have to call xcch_decode to get the actual 23 >bytes L2 frame), but it can sniff up to 4 bursts in a frame. just look >at how sdcch sniffing is done, it currently sniff 2 timeslot 0 & 3 (to >get DL & UL). > >This way you won't need any hard DSP patching, just a minor patch on >the firmware to convert CCCH listening to burst_ind (leave the BCCH >task as-it is, just mod the CCCH). And then a patch in the host app to >call xcch_decode appropriately and feed the results 'as if' it cames >from the phone directly. > >Cheers, > > Sylvain = = = = = = = = = = = = = = = = = = = = Best regards 　　　　　　　　Aegean Chou 　　　　　　　　aegean2000(a)21cn.com 　　　　　　　　　　2011-09-28

13 years, 9 months

Re: where is the gprs part source in the osmocom source tree?&In-Reply

by or_ora＠ovi.com

13 years, 9 months

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

baseband-devel September 2011