baseband-devel January 2011

baseband-devel@lists.osmocom.org

71 participants
98 discussions

where to get osmocom-supported phones
by Scott Weisman 09 Jan '11

09 Jan '11

I know this has been asked before, but I can't find the email(s). eBay in the past has generally had a few GSM900/1800 Osmocom-supported phones, although the prices weren't always great. I managed to get a V171 that way from a Hong Kong source (for about US$20 including shipping). However, the only phones that seem available today are all GSM850/1900. Someone a while back gave a link to Polish site where you could buy phones for even cheaper. Does someone have that site, or other sites that might be useful? Thanks, Scott

2 1

osmocom on windows
by Enzo Zordan 09 Jan '11

09 Jan '11

Hello from Argentina, I'm a 26 years old student of Electronical Engineering, I'm realy very interesting in this project, I have a C115, so I'll try to compile the code, but I'm not Linux user yet. Can I run this in Windows? If not... I'll download a live cd distribution of linux =) I want to use this c115 as a test field. Best regards buddy Enzo.

3 2

simtrace simtrace_usb.h
by ml＠mail.tsaitgaist.info 08 Jan '11

08 Jan '11

Hi in simtrace/at91sam7/host, simtrace_usb.h is symbolically linked to sunbeam/home/laforge/projects/git/openpcd/firmware/include/simtrace_usb.h this might not be generic enough to keep it linked, it could point to ../../../openpcd/firmware/include/simtrace_usb.h or will openpcd and simtrace be merged, or combined in any way ? thanks, kevin

2 1

sam7utils
by ml＠mail.tsaitgaist.info 08 Jan '11

08 Jan '11

Hi, I'm trying to flash simtrace on an at91sam7s, using samba. sam7utils compiles well under amd64, but does not work. It does not output anything and quits. the only indication on dmesg is : usb 4-1: usbfs: interface 0 claimed by cdc_acm while 'sam7' sets config #1 Sam_I_Am works great on amd64, but the firmware format is not the same. Does anyone knows how to convert main_simtrace.samba to a valid intel hex ? Kevin

2 2

stuck in A1 Trying RPLMN while using testing branch? - change toolchain
by Dobrica Pavlinusic 08 Jan '11

08 Jan '11

Yesterday I asked on #osmocom irc channel about my problems with using provider card and testing branch of osmocom-bb to connect to network. I was stuck in "A1 Trying RPLMN", and I didn't see any response received with all debugging turned on. Today, I decided to change my arm toolchain to gnu-arm recommended at http://bb.osmocom.org/trac/wiki/GettingStarted I recompiled, and it worked without problems. I'm writing this e-mail as future reference since I saw few people having problem with this on irc. -- Dobrica Pavlinusic 2share!2flame dpavlin(a)rot13.org Unix addict. Internet consultant. http://www.rot13.org/~dpavlin

1 0

connect to a specific network with the mobil app
by mki 07 Jan '11

07 Jan '11

I hink my mobil is always connecting to the net with the most power. is there a way to connect to a specific network? Down her my config and tries to connect to t-mobile. if i type in the vty: local# network select 1 262 01 Network not in list! local# network search 1 local# my config: local# sh run Current configuration: ! service advanced-vty ! line vty no login ! gps device /dev/ttyACM0 gps baudrate default no gps enable ! ms 1 layer2-socket /tmp/osmocom_l2 sap-socket /tmp/osmocom_sap sim none network-selection-mode auto imei 000000000000000 0 imei-fixed no emergency-imsi no call-waiting no auto-answer no clip no clir tx-power auto no simulated-delay no stick location-updating codec full-speed prefer codec half-speed no abbrev support sms a5/1 a5/2 p-gsm e-gsm r-gsm dcs class-900 4 class-dcs 1 channel-capability sdcch+tchf+tchh full-speech-v1 full-speech-v2 half-speech-v1 min-rxlev -106 dsc-max 90 exit test-sim imsi 001010000000000 ki xor 00 00 00 00 00 00 00 00 00 00 00 00 no barred-access no rplmn hplmn-search foreign-country exit no shutdown exit ! end -- View this message in context: http://baseband-devel.722152.n3.nabble.com/connect-to-a-specific-network-wi… Sent from the baseband-devel mailing list archive at Nabble.com.

1 1

Re: Osmocon not loading
by Bogdan Alecu 07 Jan '11

07 Jan '11

I used the steps from here http://bb.osmocom.org/trac/wiki/GnuArmToolchain to build the toolchain. I also tried with and without xor, no results.

4 9

RE: AW: AW: Osmocom-BB
by Sebastian --- 07 Jan '11

07 Jan '11

no,display shows nothing. Osmocon shows: r00t@r00t-laptop:~/install/osmocom-bb/src/host/osmocon$ ./osmocon -p /dev/ttyUSB0 -m c123xor ../../target/firmware/board/compal_e88/loader.compalram.bin got 2 bytes from modem, data looks like: 2f 81 /. got 1 bytes from modem, data looks like: 00 . got 4 bytes from modem, data looks like: f6 02 00 41 ...A got 1 bytes from modem, data looks like: 01 . got 1 bytes from modem, data looks like: 40 @ got 1 bytes from modem, data looks like: 66 f got 1 bytes from modem, data looks like: 74 t got 1 bytes from modem, data looks like: 6d m got 1 bytes from modem, data looks like: 74 t got 1 bytes from modem, data looks like: 6f o got 1 bytes from modem, data looks like: 6f o got 1 bytes from modem, data looks like: 6c l Received FTMTOOL from phone, ramloader has aborted got 1 bytes from modem, data looks like: 65 e got 1 bytes from modem, data looks like: 72 r got 1 bytes from modem, data looks like: 72 r got 1 bytes from modem, data looks like: 6f o got 1 bytes from modem, data looks like: 72 r got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 2f / got 1 bytes from modem, data looks like: 81 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: f6 . got 1 bytes from modem, data looks like: 02 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 41 A got 1 bytes from modem, data looks like: 01 . got 1 bytes from modem, data looks like: 40 @ got 1 bytes from modem, data looks like: 66 f got 1 bytes from modem, data looks like: 74 t got 1 bytes from modem, data looks like: 6d m got 1 bytes from modem, data looks like: 74 t got 1 bytes from modem, data looks like: 6f o got 1 bytes from modem, data looks like: 6f o got 1 bytes from modem, data looks like: 6c l Received FTMTOOL from phone, ramloader has aborted got 1 bytes from modem, data looks like: 65 e got 1 bytes from modem, data looks like: 72 r got 1 bytes from modem, data looks like: 72 r got 1 bytes from modem, data looks like: 6f o got 1 bytes from modem, data looks like: 72 r got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 2f / got 1 bytes from modem, data looks like: 81 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: f6 . got 1 bytes from modem, data looks like: 02 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 41 A got 1 bytes from modem, data looks like: 01 . got 1 bytes from modem, data looks like: 40 @ got 1 bytes from modem, data looks like: 66 f got 1 bytes from modem, data looks like: 74 t got 1 bytes from modem, data looks like: 6d m got 1 bytes from modem, data looks like: 74 t got 1 bytes from modem, data looks like: 6f o got 1 bytes from modem, data looks like: 6f o got 1 bytes from modem, data looks like: 6c l Received FTMTOOL from phone, ramloader has aborted got 1 bytes from modem, data looks like: 65 e got 1 bytes from modem, data looks like: 72 r got 1 bytes from modem, data looks like: 72 r got 1 bytes from modem, data looks like: 6f o got 1 bytes from modem, data looks like: 72 r got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 2e . got 1 bytes from modem, data looks like: c8 . got 1 bytes from modem, data looks like: 1b . got 1 bytes from modem, data looks like: f6 . got 1 bytes from modem, data looks like: 02 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 41 A got 1 bytes from modem, data looks like: 01 . got 1 bytes from modem, data looks like: 40 @ Received PROMPT1 from phone, responding with CMD read_file(../../target/firmware/board/compal_e88/loader.compalram.bin): file_size=21740, hdr_len=4, dnload_len=21747 got 1 bytes from modem, data looks like: 1b . got 1 bytes from modem, data looks like: f6 . got 1 bytes from modem, data looks like: 02 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 41 A got 1 bytes from modem, data looks like: 02 . got 1 bytes from modem, data looks like: 43 C Received PROMPT2 from phone, starting download handle_write(): 1023 bytes (1023/21747) handle_write(): 768 bytes (1791/21747) handle_write(): 768 bytes (2559/21747) handle_write(): 768 bytes (3327/21747) handle_write(): 768 bytes (4095/21747) handle_write(): 768 bytes (4863/21747) handle_write(): 768 bytes (5631/21747) handle_write(): 768 bytes (6399/21747) handle_write(): 768 bytes (7167/21747) handle_write(): 768 bytes (7935/21747) handle_write(): 768 bytes (8703/21747) handle_write(): 768 bytes (9471/21747) handle_write(): 768 bytes (10239/21747) handle_write(): 768 bytes (11007/21747) handle_write(): 768 bytes (11775/21747) handle_write(): 768 bytes (12543/21747) handle_write(): 768 bytes (13311/21747) handle_write(): 768 bytes (14079/21747) handle_write(): 768 bytes (14847/21747) handle_write(): 768 bytes (15615/21747) handle_write(): 768 bytes (16383/21747) handle_write(): 768 bytes (17151/21747) handle_write(): 768 bytes (17919/21747) handle_write(): 768 bytes (18687/21747) handle_write(): 768 bytes (19455/21747) handle_write(): 768 bytes (20223/21747) handle_write(): 768 bytes (20991/21747) handle_write(): 756 bytes (21747/21747) handle_write(): finished got 1 bytes from modem, data looks like: 1b . got 1 bytes from modem, data looks like: f6 . got 1 bytes from modem, data looks like: 02 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 41 A got 1 bytes from modem, data looks like: 03 . got 1 bytes from modem, data looks like: 42 B Received DOWNLOAD ACK from phone, your code is running now! Received DOWNLOAD ACK from phone, your code is running now! OSMOCOM Loader (revision osmocon_v0.0.0-740-g34bbb12-modified) ====================================================================== Running on compal_e88 in environment compalram Found flash of 2097152 bytes at 0x0 with 2 regions I have to press Power on few times before it loads. Subject: AW: AW: Osmocom-BB Date: Fri, 7 Jan 2011 15:59:21 +0100 From: Andreas.Eversberg(a)versatel.de To: seppel18(a)hotmail.com does the mobile show "layer1.bin" on the display after startup? did the firmware actually load on the phone? p.s. do you mind if we CC to the mailing list, so others can help or profit from the final solution? Von: Sebastian --- [mailto:seppel18@hotmail.com] Gesendet: Freitag, 7. Januar 2011 15:51 An: Andreas.Eversberg Betreff: RE: AW: Osmocom-BB still shows "MS '1' is down, radio is not started" Subject: AW: Osmocom-BB Date: Fri, 7 Jan 2011 09:43:32 +0100 From: Andreas.Eversberg(a)versatel.de To: seppel18(a)hotmail.com CC: baseband-devel(a)lists.osmocom.org hi, can you try the following steps: 1. start osmocon 2. start mobile (be sure it is not shutdown) 3. press the power button on the phone to start the loading process after loading the binary into the phone, the phone should indicate power on to the mobile process. andreas Von: Sebastian --- [mailto:seppel18@hotmail.com] Gesendet: Freitag, 7. Januar 2011 01:37 An: Andreas.Eversberg Betreff: Osmocom-BB Hi Thanks for your Help. Now it says ms 1 is still down "radio not started". Osmocon is running (with ramloader) and layer2 socket is available. hi sebastian, there are three ways to bing it down: - "enable" -> "conf t" -> "ms 1" -> "shutdown" - the layer2 socket does not exist on startup (osmocon loader not started) - the shutdown state is stored in the config (doing "write" when it is down) just bring it up after starting osmocon: - "enable" -> "conf t" -> "ms 1" -> "no shutdown" and don't forget "write" the config, so it must not be done on every startup. andreas

2 2

Osmocon not loading
by Bogdan Alecu 07 Jan '11

07 Jan '11

Hello, I have managed to compile everything, I connected my phone trough USB but when I try to run ./osmocon -p /dev/ttyUSB0 -m c123xor ../../target/firmware/board/compal_e88/loader.compalram.bin I do not get the " Received PROMPT1 from phone, responding with CMD" message All I get is this: root@ubuntu:/home/trepx/osmocom-bb/src/host/osmocon# ./osmocon -p /dev/ttyUSB0 -m c123xor ../../target/firmware/board/compal_e88/loader.compalram.bin got 2 bytes from modem, data looks like: f1 06 .. got 5 bytes from modem, data looks like: 72 82 bf 7d fd r..}. got 1 bytes from modem, data looks like: 7f . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: a6 . got 1 bytes from modem, data looks like: 0a . got 1 bytes from modem, data looks like: 3a : got 1 bytes from modem, data looks like: 02 . got 1 bytes from modem, data looks like: 4d M got 1 bytes from modem, data looks like: da . root@ubuntu:/home/trepx/osmocom-bb/src/host/osmocon# ./osmocon -p /dev/ttyUSB0 -m c123xor ../../target/firmware/board/compal_e88/loader.compalram.bin got 2 bytes from modem, data looks like: f1 06 .. got 4 bytes from modem, data looks like: a6 51 d2 51 .Q.Q got 1 bytes from modem, data looks like: 4d M got 1 bytes from modem, data looks like: a3 . got 1 bytes from modem, data looks like: a3 . got 1 bytes from modem, data looks like: 00 . I have waited for 10 minutes and still nothing. Any idea how to make it work? Regards, Bogdan

3 2

Newbie: C123 + layer1.compalram.bin + layer23
by Nicolas Bareil 07 Jan '11

07 Jan '11

Hello, I try to use the 'host23/mobile' application on a C123 but without success. I followed Steve's instructions[1] with today's git tree (d95eddad): 1. osmocon -p /dev/ttyS0 -m c123xor layer1.compalram.bin 2. ./host/layer23/src/mobile/mobile 3. Power on the phone (output of theses commands is thereafter) But I'm not sure it really works: the firmware seems to freeze (not responding to the power button anymore) and the last output of 'mobile' is: <0003> gsm322.c:257 Sync to ARFCN=104 rxlev=-65 (No sysinfo yet, ccch mode NONE) Based on the low rxlevel, I guess it is not acquiring any meaningful signal? In [2], Steve said the internal antenna was switched off when the cable is plugged in, is it still true? I tried to RTFM but I am stuck here. Thanks for your patience, Footnotes: [1] http://baseband-devel.722152.n3.nabble.com/Running-osmocombb-on-a-Motorol-C… [2] http://lists.osmocom.org/pipermail/baseband-devel/2010-May/000435.html ,---- | % osmocon -p /dev/ttyS0 -m c123xor layer1.compalram.bin | ... | Received DOWNLOAD ACK from phone, your code is running now! | | OSMOCOM Layer 1 (revision osmocon_v0.0.0-598-gd95edda) | ====================================================================== | Device ID code: 0xb4fb | Device Version code: 0x0000 | ARM ID code: 0xfff3 | cDSP ID code: 0x0128 | Die ID code: ebd8283cba021198 | ====================================================================== | REG_DPLL=0x2413 | CNTL_ARM_CLK=0xf0a1 | CNTL_CLK=0xff91 | CNTL_RST=0xfff3 | CNTL_ARM_DIV=0xfff9 | ====================================================================== | | THIS FIRMWARE WAS COMPILED WITHOUT TX SUPPORT!!! | Assert DSP into Reset | Releasing DSP from Reset | Setting some dsp_api.ndb values | Setting API NDB parameters | DSP Download Status: 0x0001 | DSP API Version: 0x0000 0x0000 | Finishing download phase | DSP Download Status: 0x0002 | DSP API Version: 0x3606 0x0000 | LOST 7478! | L1CTL_RESET_REQ: FULL!L1CTL_PM_REQ start=0 end=124 | PM MEAS: ARFCN=0, 27 dBm at baseband, -110 dBm at RF | PM MEAS: ARFCN=0, 26 dBm at baseband, -112 dBm at RF | PM MEAS: ARFCN=1, 30 dBm at baseband, -107 dBm at RF | PM MEAS: ARFCN=2, 29 dBm at baseband, -108 dBm at RF | PM MEAS: ARFCN=3, 43 dBm at baseband, -94 dBm at RF | PM MEAS: ARFCN=4, 32 dBm at baseband, -105 dBm at RF | ../.. | PM MEAS: ARFCN=1023, 33 dBm at baseband, -104 dBm at RF | L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=104, flags=0x7) | Starting FCCH RecognitionFB0 (1748:10): TOA=11712, Power=-106dBm, Angle=-22058Hz | FB0 (1775:11): TOA=12528, Power= -65dBm, Angle=-3818Hz | FB0 (1796:5): TOA= 5280, Power= -68dBm, Angle=-16117Hz | FB0 (1799:1): TOA= 96, Power=-109dBm, Angle= 7082Hz `---- ,---- | % ./host/layer23/src/mobile/mobile | ... | Failed to connect to '/tmp/osmocom_sap'. | Failed during sap_open(), no SIM reader | <000e> sim.c:1206 init SIM client | <0005> gsm48_cc.c:61 init Call Control | <0001> gsm48_rr.c:5330 init Radio Ressource process | <0004> gsm48_mm.c:1220 init Mobility Management process | <0004> gsm48_mm.c:971 Selecting PLMN SEARCH state, because no SIM. | <0002> gsm322.c:3466 init PLMN process | <0003> gsm322.c:3467 init Cell Selection process | <0003> gsm322.c:3521 No stored BA list | VTY available on port 4247. | Mobile initialized, please start phone now! | <0002> gsm322.c:3093 (ms 1) Event 'EVENT_SWITCH_ON' for automatic PLMN selection in state 'A0 null' | <000d> gsm322.c:1055 SIM is removed | <0002> gsm322.c:1056 SIM is removed | <0002> gsm322.c:511 new state 'A0 null' -> 'A6 no SIM inserted' | <0003> gsm322.c:3313 (ms 1) Event 'EVENT_SWITCH_ON' for Cell selection in state 'C0 null' | <0003> gsm322.c:2986 Switch on without SIM. | <0003> gsm322.c:540 new state 'C0 null' -> 'C6 any cell selection' | <0003> gsm322.c:2404 Getting PM for frequency 0 twice. Overwriting the first! Please fix prim_pm.c | <0003> gsm322.c:2415 Found signal (frequency 3 rxlev -94 (16)) | <0003> gsm322.c:2415 Found signal (frequency 8 rxlev -86 (24)) | <0003> gsm322.c:2415 Found signal (frequency 16 rxlev -93 (17)) | ... | <0003> gsm322.c:2415 Found signal (frequency 819 rxlev -97 (13)) | <0003> gsm322.c:2404 Getting PM for frequency 955 twice. Overwriting the first! Please fix prim_pm.c | <0003> gsm322.c:2415 Found signal (frequency 982 rxlev -98 (12)) | ... | <0003> gsm322.c:2415 Found signal (frequency 1004 rxlev -91 (19)) | <0003> gsm322.c:2415 Found signal (frequency 1007 rxlev -89 (21)) | <0003> gsm322.c:2415 Found signal (frequency 1009 rxlev -97 (13)) | <0003> gsm322.c:2415 Found signal (frequency 1010 rxlev -86 (24)) | <0003> gsm322.c:2415 Found signal (frequency 1011 rxlev -67 (43)) | <0003> gsm322.c:2415 Found signal (frequency 1012 rxlev -86 (24)) | <0003> gsm322.c:2415 Found signal (frequency 1013 rxlev -80 (30)) | <0003> gsm322.c:2415 Found signal (frequency 1014 rxlev -87 (23)) | <0003> gsm322.c:2415 Found signal (frequency 1021 rxlev -82 (28)) | <0003> gsm322.c:2415 Found signal (frequency 1022 rxlev -98 (12)) | <0003> gsm322.c:2348 Found 97 frequencies. | <0003> gsm322.c:257 Sync to ARFCN=104 rxlev=-65 (No sysinfo yet, ccch mode NONE) `----

4 7

← Newer
1
2
3
4
5
6
7
8
9
10
Older →

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

baseband-devel January 2011