Do i need a GPS Reciver ?
I tought that it will calculate the location over Triangulation ?
On Tue, Jan 25, 2011 at 10:34 AM, Holger Hans Peter Freyther <
holger(a)freyther.de> wrote:
> On 01/25/2011 08:33 AM, MArc Richter wrote:
>
> > But when i convert it into a kml file with gsmmap i can't see any GPS
> > koordinates. Why ?
>
> Do you have a GPS receiver attached to your computer?
>
>
Hey!
I've tryed out the Cell_log tool to get the Location of the GSM cells.
But when i convert it into a kml file with gsmmap i can't see any GPS
koordinates. Why ?
I use the Sylvain branch an compiled with TX support
thx
I looked more into this phone recently and found out it supported SIP over
WiFi as well.
Does anyone know about the software running the phone? How are the VOIP
codecs handled? Is there hardware support for them?
Finally, does code and/or drivers already exist for the hardware components?
I happened to be looking for something exactly like this anyway. Cool to
know that OsmocomBB can (potentially) work on it too.
Scott
Hi all,
it appears that we all know of some issues but we are not writing them down.
Would it make sense to start using the bugtracker for that? Or just a
dedicated wiki site?
Hi,
maybe I'm missing something, but when I read that the Pirelli DP-L10
would be supported I tried to get it running:
I didn't patch my usb-module, but used:
modprobe -v cp210x
echo "0489 e003" > /sys/bus/usb-serial/drivers/cp210x/new_id
from the steve-m/testing-branch I compiled the firmware and loaded it with
./host/osmocon/osmocon -p /dev/ttyUSB0 -m romload target/firmware/board/pirelli_dpl10/hello_world.highram.bin
onto the phone... that worked but I was never able to see any messages
after the upload:
Received block ack from phone
Sending checksum: 0xaa
Checksum on phone side matches, let's branch to your code
Branching to 0x00820000
Received branch ack, your code is running now!
... there it stayed forever ...
I'm pretty sure that the code runs, because I commented in init.c the
keyboard lighting code and it didn't light up after upload. I've tried
other bins but to no success.
Any hint or am it too early playing with that hardware?
Greetings Leif
Hello,
In order for this attack to work it has to be on a GSM network because on 3G there is a higher security mechanism. A way to protect against this, for the opperator, could be to implement 3G over 900Mhz so this way even if the targeted phones are on 2G they will still be protected. Am I right?
Regards,
Bogdan
Hey, I ordered the serial cable coming from dealextreme and it has not
arrived yet. I noticed today that the link was taken off the wiki due to it
not being at TTL levels. I was wondering if I bought a Nokia serial cable
(the ones that have the prolific chips in them) which runs at 3.3v out of
the box, could I just connect the tx and rx pins to the cable I had bought
and it would possibly work or would that be a bad idea and I should cut my
losses and kill the order.
--
-Tom
