28 Jan
2011
28 Jan
'11
8:09 p.m.
Hi,
sorry if I shouldn`t write correclly, i`m not that good in english.
i have a Motorola c118 and this usb/serial cable:
http://www.gsmbase.de/shop/show_product.php?products_id=620 here
my problem:
compiling was successfully.
than i run osmocon:
./osmocon -p /dev/ttyUSB0 -m c123xor
/home/test/install/osmocom-bb/src/target/firmware/board/compal_e88/layer1.ramload.bin
i pressed power on the phone.
nothing happend.
again.
nothing happend, no output, no upload/download to/from the phone...
what is my fault? can you help me?
i have tested it with: -m 123 ; -m 118xor ; -m 118 (the same thing)
my system is ubuntu 10.10 (not in a virtual box or something else).
thanks a lot,
tobsen
--
View this message in context:
http://baseband-devel.722152.n3.nabble.com/doesn-t-get-output-from-osmocon-…
Sent from the baseband-devel mailing list archive at Nabble.com.
28 Jan
28 Jan
10:46 p.m.
Hi,
first test if the cable is working. a fast but dirty way is to rub the
tip with your fingers. this generates noise that should show some random
input in osmocon.
also but sure to not charge the phone while using osmocon, this can
inhibit the ram loader.
good luck,
kevin
On 01/28/2011 08:09 PM, tobsen wrote:
Hi,
sorry if I shouldn`t write correclly, i`m not that good in english.
i have a Motorola c118 and this usb/serial cable:
http://www.gsmbase.de/shop/show_product.php?products_id=620 here
my problem:
compiling was successfully.
than i run osmocon:
./osmocon -p /dev/ttyUSB0 -m c123xor
/home/test/install/osmocom-bb/src/target/firmware/board/compal_e88/layer1.ramload.bin
i pressed power on the phone.
nothing happend.
again.
nothing happend, no output, no upload/download to/from the phone...
what is my fault? can you help me?
i have tested it with: -m 123 ; -m 118xor ; -m 118 (the same thing)
my system is ubuntu 10.10 (not in a virtual box or something else).
thanks a lot,
tobsen
11:25 p.m.
another way is to shortcut the tip and middle ring of the connector, open a
serial terminal and see if it echoes back what you type in
2011/1/28 <ml(a)mail.tsaitgaist.info>
Hi,
first test if the cable is working. a fast but dirty way is to rub the
tip with your fingers. this generates noise that should show some random
input in osmocon.
also but sure to not charge the phone while using osmocon, this can
inhibit the ram loader.
good luck,
kevin
On 01/28/2011 08:09 PM, tobsen wrote:
Hi,
sorry if I shouldn`t write correclly, i`m not that good in english.
i have a Motorola c118 and this usb/serial cable:
http://www.gsmbase.de/shop/show_product.php?products_id=620 here
my problem:
compiling was successfully.
than i run osmocon:
./osmocon -p /dev/ttyUSB0 -m c123xor
/home/test/install/osmocom-bb/src/target/firmware/board/compal_e88/layer1.ramload.bin
i pressed power on the phone.
nothing happend.
again.
nothing happend, no output, no upload/download to/from the phone...
what is my fault? can you help me?
i have tested it with: -m 123 ; -m 118xor ; -m 118 (the same thing)
my system is ubuntu 10.10 (not in a virtual box or something else).
thanks a lot,
tobsen
29 Jan
29 Jan
2:29 a.m.
New subject: a very simple cuestion (only 1 sec.)
libtool 2.4
pkg_config 0.4
M4 1.4.15
autoconf 2.68
automake 1.9.6
is ok?
Thank you!
3:34 a.m.
thanks to you,
i checked that:
there is no input in osmocon, when i rub the tip, so i think the cable is shit.
that was simple...
i buy a new one, are the akku-king cable and the gsmlibery cable
really the right ones???
both pictures are showing not the t191 unlock cable...
good greetings
tobsen
2011/1/28 <ml(a)mail.tsaitgaist.info>fo>:
Hi,
first test if the cable is working. a fast but dirty way is to rub the
tip with your fingers. this generates noise that should show some random
input in osmocon.
also but sure to not charge the phone while using osmocon, this can
inhibit the ram loader.
good luck,
kevin
On 01/28/2011 08:09 PM, tobsen wrote:
Hi,
sorry if I shouldn`t write correclly, i`m not that good in english.
i have a Motorola c118 and this usb/serial cable:
http://www.gsmbase.de/shop/show_product.php?products_id=620 here
my problem:
compiling was successfully.
than i run osmocon:
./osmocon -p /dev/ttyUSB0 -m c123xor
/home/test/install/osmocom-bb/src/target/firmware/board/compal_e88/layer1.ramload.bin
i pressed power on the phone.
nothing happend.
again.
nothing happend, no output, no upload/download to/from the phone...
what is my fault? can you help me?
i have tested it with: -m 123 ; -m 118xor ; -m 118 (the same thing)
my system is ubuntu 10.10 (not in a virtual box or something else).
thanks a lot,
tobsen
9:34 a.m.
they're the right cables.
ignore the pictures, only the name is important.
these are some cheap websites, don't expect good quality content.
kevin
On 01/29/2011 03:34 AM, Tobias Funke wrote:
thanks to you,
i checked that:
there is no input in osmocon, when i rub the tip, so i think the cable is shit.
that was simple...
i buy a new one, are the akku-king cable and the gsmlibery cable
really the right ones???
both pictures are showing not the t191 unlock cable...
good greetings
tobsen
2011/1/28 <ml(a)mail.tsaitgaist.info>fo>:
Hi,
first test if the cable is working. a fast but dirty way is to rub the
tip with your fingers. this generates noise that should show some random
input in osmocon.
also but sure to not charge the phone while using osmocon, this can
inhibit the ram loader.
good luck,
kevin
On 01/28/2011 08:09 PM, tobsen wrote:
Hi,
sorry if I shouldn`t write correclly, i`m not that good in english.
i have a Motorola c118 and this usb/serial cable:
http://www.gsmbase.de/shop/show_product.php?products_id=620 here
my problem:
compiling was successfully.
than i run osmocon:
./osmocon -p /dev/ttyUSB0 -m c123xor
/home/test/install/osmocom-bb/src/target/firmware/board/compal_e88/layer1.ramload.bin
i pressed power on the phone.
nothing happend.
again.
nothing happend, no output, no upload/download to/from the phone...
what is my fault? can you help me?
i have tested it with: -m 123 ; -m 118xor ; -m 118 (the same thing)
my system is ubuntu 10.10 (not in a virtual box or something else).
thanks a lot,
tobsen
11:26 a.m.
thank you for helping me, kevin.
tobsen
2011/1/29 <ml(a)mail.tsaitgaist.info>fo>:
they're the right cables.
ignore the pictures, only the name is important.
these are some cheap websites, don't expect good quality content.
kevin
On 01/29/2011 03:34 AM, Tobias Funke wrote:
thanks to you,
i checked that:
there is no input in osmocon, when i rub the tip, so i think the cable is shit.
that was simple...
i buy a new one, are the akku-king cable and the gsmlibery cable
really the right ones???
both pictures are showing not the t191 unlock cable...
good greetings
tobsen
2011/1/28 <ml(a)mail.tsaitgaist.info>fo>:
Hi,
first test if the cable is working. a fast but dirty way is to rub the
tip with your fingers. this generates noise that should show some random
input in osmocon.
also but sure to not charge the phone while using osmocon, this can
inhibit the ram loader.
good luck,
kevin
On 01/28/2011 08:09 PM, tobsen wrote:
Hi,
sorry if I shouldn`t write correclly, i`m not that good in english.
i have a Motorola c118 and this usb/serial cable:
http://www.gsmbase.de/shop/show_product.php?products_id=620 here
my problem:
compiling was successfully.
than i run osmocon:
./osmocon -p /dev/ttyUSB0 -m c123xor
/home/test/install/osmocom-bb/src/target/firmware/board/compal_e88/layer1.ramload.bin
i pressed power on the phone.
nothing happend.
again.
nothing happend, no output, no upload/download to/from the phone...
what is my fault? can you help me?
i have tested it with: -m 123 ; -m 118xor ; -m 118 (the same thing)
my system is ubuntu 10.10 (not in a virtual box or something else).
thanks a lot,
tobsen
4849
days inactive
4850
days old
baseband-devel@lists.osmocom.org
6 comments
6 participants
participants (6)
-
ml＠mail.tsaitgaist.info -
n0p [Luis Bernal] -
Pedro Collote -
Tobias Funke -
Tobias Funke -
tobsen