8 May
2014
8 May
'14
7:51 p.m.
Ravi Sharan <ravisharan(a)iith.ac.in> wrote:
I am trying out osmocom-bb with the Motorla C115.
[...]
< I get the following error:
$ osmocon -p /dev/ttyUSB0 -m c123
~/osmocom-bb/src/target/firmware/board/compal_e88/hello_world.compalram.bin
[snipped the part where everything goes as it should]
got 1 bytes from modem, data looks like: 1b .
got 1 bytes from modem, data looks like: f6 .
got 1 bytes from modem, data looks like: 02 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 45 E
got 1 bytes from modem, data looks like: 53 S
got 1 bytes from modem, data looks like: 16 .
Received DOWNLOAD NACK from phone, something went wrong :(
Try -m c123xor instead of -m c123.
HTH,
SF
17 May
17 May
12:29 p.m.
New subject: Error loading firmware onto Motorola C115.
Hi Ravi,
If you are looking for a patch that speeds us the download for cygwin
environment in Windows then its present in the archives.
I had used it while I was trying to get osmocombb working on Windows.
I am not able to find it in my machine now and I have switched to
linux.
Its written by Dieter. Its somewhere in the archives before Jun 25
2011. Hope this helps.
Thanks and Regards,
RM
12:31 p.m.
New subject: Error loading firmware onto Motorola C115.
Hi RM,
I have currently built osmocombb on Ubuntu. I have checked it
with a Linux mint box and my ftdi cable gets unplugged as soon as it gets
plugged in.
On May 17, 2014 3:59 PM, "R M" <rm.engineer84(a)gmail.com> wrote:
Hi Ravi,
If you are looking for a patch that speeds us the download for cygwin
environment in Windows then its present in the archives.
I had used it while I was trying to get osmocombb working on Windows.
I am not able to find it in my machine now and I have switched to
linux.
Its written by Dieter. Its somewhere in the archives before Jun 25
2011. Hope this helps.
Thanks and Regards,
RM
18 May
18 May
8:52 a.m.
New subject: Error loading firmware onto Motorola C115.
Hi,
I have currently built osmocombb on Ubuntu. I have
checked it
with a Linux mint box and my ftdi cable gets unplugged as soon as it gets
plugged in.
I did not understand what you mean by the above statement. I am not an
advanced linux user.
Before you plug in the cable, run this command in terminal: tail -f
/var/log/messages
Now insert the cable to the computer and check what is written in the
terminal. This should help you in figuring out what is wrong.
30 Jul
30 Jul
9:43 a.m.
New subject: Error loading firmware onto Motorola C115.
Hello,
Solved the issue. Using the chainloading flag did the magic.
Thanks Sylvain Munaut. For future references, this can work, if you bump
into same error (I think even the cable in use can affect the transfer)
./osmocon -p /dev/ttyUSB0 -m c123xor -c
../../target/firmware/board/compal_exx/FIRMWARE.compalram.bin
On Sun, May 18, 2014 at 12:22 PM, R M <rm.engineer84(a)gmail.com> wrote:
Hi,
I have currently built osmocombb on Ubuntu. I
have checked it
with a Linux mint box and my ftdi cable gets unplugged as soon as it gets
plugged in.
I did not understand what you mean by the above statement. I am not an
advanced linux user.
Before you plug in the cable, run this command in terminal: tail -f
/var/log/messages
Now insert the cable to the computer and check what is written in the
terminal. This should help you in figuring out what is wrong.
From your mail id, I find that you are in a place where there must be
lot of advanced linux users. You can get help from them as well if you
still face issues as they can see your computer screen.
Regards,
RM
10:22 a.m.
New subject: Error loading firmware onto Motorola C115.
Hi,
Solved the issue. Using the chainloading flag
did the magic. Thanks
Sylvain Munaut. For future references, this can work, if you bump into same
error (I think even the cable in use can affect the transfer)
> ./osmocon -p /dev/ttyUSB0 -m c123xor -c
> ../../target/firmware/board/compal_exx/FIRMWARE.compalram.bin
Are you sure you used the compalram.bin ? I seem to remember that
chainloading requires the .highram.bin version.
Cheers,
Sylvain
10:35 a.m.
New subject: Error loading firmware onto Motorola C115.
Hi,
Yes, its FIRMWARE.highram.bin, not .compalram.bin.
Ravi
On Wed, Jul 30, 2014 at 1:52 PM, Sylvain Munaut <246tnt(a)gmail.com> wrote:
Hi,
Solved the issue. Using the chainloading
flag did the magic.
Thanks
Sylvain Munaut. For future references, this can
work, if you bump into
same
error (I think even the cable in use can affect
the transfer)
> ./osmocon -p /dev/ttyUSB0 -m c123xor -c
> ../../target/firmware/board/compal_exx/FIRMWARE.compalram.bin
Are you sure you used the compalram.bin ? I seem to remember that
chainloading requires the .highram.bin version.
Cheers,
Sylvain
3583
days inactive
3666
days old
baseband-devel@lists.osmocom.org
6 comments
4 participants
participants (4)
-
msokolov＠ivan.Harhan.ORG -
R M -
Ravi Sharan -
Sylvain Munaut