Hello,
Solved the issue. Using the chainloading flag did the magic.
Thanks Sylvain Munaut. For future references, this can work, if you bump
into same error (I think even the cable in use can affect the transfer)
./osmocon -p /dev/ttyUSB0 -m c123xor -c
../../target/firmware/board/compal_exx/FIRMWARE.compalram.bin
On Sun, May 18, 2014 at 12:22 PM, R M <rm.engineer84(a)gmail.com> wrote:
Hi,
I have currently built osmocombb on Ubuntu. I
have checked it
with a Linux mint box and my ftdi cable gets unplugged as soon as it gets
plugged in.
I did not understand what you mean by the above statement. I am not an
advanced linux user.
Before you plug in the cable, run this command in terminal: tail -f
/var/log/messages
Now insert the cable to the computer and check what is written in the
terminal. This should help you in figuring out what is wrong.
From your mail id, I find that you are in a place where there must be
lot of advanced linux users. You can get help from them as well if you
still face issues as they can see your computer screen.
Regards,
RM