Hi,
Yes, its FIRMWARE.highram.bin, not .compalram.bin.
Ravi
On Wed, Jul 30, 2014 at 1:52 PM, Sylvain Munaut <246tnt(a)gmail.com> wrote:
Hi,
Solved the issue. Using the chainloading
flag did the magic.
Thanks
Sylvain Munaut. For future references, this can
work, if you bump into
same
error (I think even the cable in use can affect
the transfer)
> ./osmocon -p /dev/ttyUSB0 -m c123xor -c
> ../../target/firmware/board/compal_exx/FIRMWARE.compalram.bin
Are you sure you used the compalram.bin ? I seem to remember that
chainloading requires the .highram.bin version.
Cheers,
Sylvain