March 2022 - gerrit-log - lists.osmocom.org

Build failure of network:osmocom:nightly/simtrace2 in openSUSE_Leap_15.1_ARM/armv7l

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/s… Package network:osmocom:nightly/simtrace2 failed to build in openSUSE_Leap_15.1_ARM/armv7l Check out the package for editing: osc checkout network:osmocom:nightly simtrace2 Last lines of build log: [ 105s] checking whether to build shared libraries... yes [ 105s] checking whether to build static libraries... no [ 105s] checking for pkg-config... /usr/bin/pkg-config [ 105s] checking for armv7hl-suse-linux-gnueabi-pkg-config... /usr/bin/armv7hl-suse-linux-gnueabi-pkg-config [ 105s] checking pkg-config is at least version 0.20... yes [ 106s] checking if gcc supports -fvisibility=hidden... yes [ 106s] checking for libosmocore >= 1.4.0... no [ 106s] configure: error: Package requirements (libosmocore >= 1.4.0) were not met: [ 106s] [ 106s] Package 'libsctp', required by 'libosmocore', not found [ 106s] [ 106s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 106s] installed software in a non-standard prefix. [ 106s] [ 106s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 106s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 106s] See the pkg-config man page for more details. [ 106s] error: Bad exit status from /var/tmp/rpm-tmp.o6Kkml (%build) [ 106s] [ 106s] [ 106s] RPM build errors: [ 106s] Bad exit status from /var/tmp/rpm-tmp.o6Kkml (%build) [ 106s] ### VM INTERACTION START ### [ 106s] [ 95.064502] sysrq: SysRq : Power Off [ 106s] [ 95.068037] reboot: Power down [ 106s] ### VM INTERACTION END ### [ 106s] [ 106s] obs-arm-5 failed "build simtrace2.spec" at Mon Mar 28 00:43:51 UTC 2022. [ 106s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/libosmo-netif in openSUSE_Leap_15.1_ARM/armv7l

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/l… Package network:osmocom:nightly/libosmo-netif failed to build in openSUSE_Leap_15.1_ARM/armv7l Check out the package for editing: osc checkout network:osmocom:nightly libosmo-netif Last lines of build log: [ 91s] checking syslog.h presence... yes [ 91s] checking for syslog.h... yes [ 91s] checking ctype.h usability... yes [ 91s] checking ctype.h presence... yes [ 91s] checking for ctype.h... yes [ 91s] checking if gcc supports -fvisibility=hidden... yes [ 92s] checking for libosmocore >= 1.5.0... no [ 92s] configure: error: Package requirements (libosmocore >= 1.5.0) were not met: [ 92s] [ 92s] Package 'libsctp', required by 'libosmocore', not found [ 92s] [ 92s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 92s] installed software in a non-standard prefix. [ 92s] [ 92s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 92s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 92s] See the pkg-config man page for more details. [ 92s] error: Bad exit status from /var/tmp/rpm-tmp.C2lhep (%build) [ 92s] [ 92s] [ 92s] RPM build errors: [ 92s] Bad exit status from /var/tmp/rpm-tmp.C2lhep (%build) [ 92s] ### VM INTERACTION START ### [ 92s] [ 81.336208] sysrq: SysRq : Power Off [ 92s] [ 81.365845] reboot: Power down [ 92s] ### VM INTERACTION END ### [ 92s] [ 92s] armbuild22 failed "build libosmo-netif.spec" at Mon Mar 28 00:43:09 UTC 2022. [ 92s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/osmo-ggsn in openSUSE_Leap_15.1_ARM/armv7l

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o… Package network:osmocom:nightly/osmo-ggsn failed to build in openSUSE_Leap_15.1_ARM/armv7l Check out the package for editing: osc checkout network:osmocom:nightly osmo-ggsn Last lines of build log: [ 92s] checking for getopt_long... yes [ 92s] checking whether build environment is sane... yes [ 92s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 92s] checking whether make sets $(MAKE)... yes [ 92s] checking for style of include used by make... GNU [ 92s] checking dependency style of gcc... none [ 92s] checking for libosmocore >= 1.5.0... no [ 92s] configure: error: Package requirements (libosmocore >= 1.5.0) were not met: [ 92s] [ 92s] Package 'libsctp', required by 'libosmocore', not found [ 92s] [ 92s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 92s] installed software in a non-standard prefix. [ 92s] [ 92s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 92s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 92s] See the pkg-config man page for more details. [ 92s] error: Bad exit status from /var/tmp/rpm-tmp.4jzXn5 (%build) [ 92s] [ 92s] [ 92s] RPM build errors: [ 92s] Bad exit status from /var/tmp/rpm-tmp.4jzXn5 (%build) [ 92s] ### VM INTERACTION START ### [ 93s] [ 80.456595] sysrq: SysRq : Power Off [ 93s] [ 80.458341] reboot: Power down [ 93s] ### VM INTERACTION END ### [ 93s] [ 93s] obs-arm-5 failed "build osmo-ggsn.spec" at Mon Mar 28 00:42:11 UTC 2022. [ 93s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/libosmo-abis in openSUSE_Leap_15.1_ARM/armv7l

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/l… Package network:osmocom:nightly/libosmo-abis failed to build in openSUSE_Leap_15.1_ARM/armv7l Check out the package for editing: osc checkout network:osmocom:nightly libosmo-abis Last lines of build log: [ 104s] checking whether to build shared libraries... yes [ 104s] checking whether to build static libraries... no [ 104s] checking for pkg-config... /usr/bin/pkg-config [ 104s] checking for armv7hl-suse-linux-gnueabi-pkg-config... /usr/bin/armv7hl-suse-linux-gnueabi-pkg-config [ 104s] checking pkg-config is at least version 0.20... yes [ 104s] checking if gcc supports -fvisibility=hidden... yes [ 104s] checking for libosmocore >= 1.6.0... no [ 104s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met: [ 104s] [ 104s] Package 'libsctp', required by 'libosmocore', not found [ 104s] [ 104s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 104s] installed software in a non-standard prefix. [ 104s] [ 104s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 104s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 104s] See the pkg-config man page for more details. [ 104s] error: Bad exit status from /var/tmp/rpm-tmp.091baD (%build) [ 104s] [ 104s] [ 104s] RPM build errors: [ 104s] Bad exit status from /var/tmp/rpm-tmp.091baD (%build) [ 104s] ### VM INTERACTION START ### [ 105s] [ 87.706246] sysrq: SysRq : Power Off [ 105s] [ 87.713161] reboot: Power down [ 105s] ### VM INTERACTION END ### [ 105s] [ 105s] obs-arm-6 failed "build libosmo-abis.spec" at Mon Mar 28 00:40:37 UTC 2022. [ 105s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/osmo-pcu in openSUSE_Leap_15.1_ARM/armv7l

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o… Package network:osmocom:nightly/osmo-pcu failed to build in openSUSE_Leap_15.1_ARM/armv7l Check out the package for editing: osc checkout network:osmocom:nightly osmo-pcu Last lines of build log: [ 87s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 87s] checking how to hardcode library paths into programs... immediate [ 87s] checking for pkg-config... /usr/bin/pkg-config [ 87s] checking for armv7hl-suse-linux-gnueabi-pkg-config... /usr/bin/armv7hl-suse-linux-gnueabi-pkg-config [ 87s] checking pkg-config is at least version 0.20... yes [ 87s] checking for ANSI C header files... (cached) yes [ 87s] checking for libosmocore >= 1.6.0... no [ 87s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met: [ 87s] [ 87s] Package 'libsctp', required by 'libosmocore', not found [ 87s] [ 87s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 87s] installed software in a non-standard prefix. [ 87s] [ 87s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 87s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 87s] See the pkg-config man page for more details. [ 87s] error: Bad exit status from /var/tmp/rpm-tmp.cXgQDr (%build) [ 87s] [ 87s] [ 87s] RPM build errors: [ 87s] Bad exit status from /var/tmp/rpm-tmp.cXgQDr (%build) [ 87s] ### VM INTERACTION START ### [ 100s] [ 81.636317] sysrq: SysRq : Power Off [ 100s] [ 81.637976] reboot: Power down [ 100s] ### VM INTERACTION END ### [ 100s] [ 100s] armbuild02 failed "build osmo-pcu.spec" at Mon Mar 28 00:38:48 UTC 2022. [ 100s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/osmo-sip-connector in openSUSE_Leap_15.1_ARM/armv7l

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o… Package network:osmocom:nightly/osmo-sip-connector failed to build in openSUSE_Leap_15.1_ARM/armv7l Check out the package for editing: osc checkout network:osmocom:nightly osmo-sip-connector Last lines of build log: [ 69s] checking whether we are using the GNU C compiler... yes [ 69s] checking whether gcc accepts -g... yes [ 69s] checking for gcc option to accept ISO C89... none needed [ 69s] checking whether gcc understands -c and -o together... yes [ 69s] checking for style of include used by make... GNU [ 69s] checking dependency style of gcc... none [ 69s] checking for libosmocore >= 1.5.0... no [ 69s] configure: error: Package requirements (libosmocore >= 1.5.0) were not met: [ 69s] [ 69s] Package 'libsctp', required by 'libosmocore', not found [ 69s] [ 69s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 69s] installed software in a non-standard prefix. [ 69s] [ 69s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 69s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 69s] See the pkg-config man page for more details. [ 70s] error: Bad exit status from /var/tmp/rpm-tmp.pXAgug (%build) [ 70s] [ 70s] [ 70s] RPM build errors: [ 70s] Bad exit status from /var/tmp/rpm-tmp.pXAgug (%build) [ 70s] ### VM INTERACTION START ### [ 70s] [ 56.169237] sysrq: SysRq : Power Off [ 70s] [ 56.171532] reboot: Power down [ 70s] ### VM INTERACTION END ### [ 70s] [ 70s] obs-arm-5 failed "build osmo-sip-connector.spec" at Mon Mar 28 00:38:24 UTC 2022. [ 70s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/osmo-gbproxy in openSUSE_Leap_15.1_ARM/aarch64

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o… Package network:osmocom:nightly/osmo-gbproxy failed to build in openSUSE_Leap_15.1_ARM/aarch64 Check out the package for editing: osc checkout network:osmocom:nightly osmo-gbproxy Last lines of build log: [ 77s] checking whether to build static libraries... yes [ 77s] checking for pkg-config... /usr/bin/pkg-config [ 77s] checking for aarch64-suse-linux-gnu-pkg-config... /usr/bin/aarch64-suse-linux-gnu-pkg-config [ 77s] checking pkg-config is at least version 0.20... yes [ 77s] checking for library containing dlopen... -ldl [ 78s] checking for library containing dlsym... -ldl [ 78s] checking for libosmocore >= 1.6.0... no [ 78s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met: [ 78s] [ 78s] Package 'libsctp', required by 'libosmocore', not found [ 78s] [ 78s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 78s] installed software in a non-standard prefix. [ 78s] [ 78s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 78s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 78s] See the pkg-config man page for more details. [ 78s] error: Bad exit status from /var/tmp/rpm-tmp.uHRAzS (%build) [ 78s] [ 78s] [ 78s] RPM build errors: [ 78s] Bad exit status from /var/tmp/rpm-tmp.uHRAzS (%build) [ 78s] ### VM INTERACTION START ### [ 78s] [ 67.203178] sysrq: SysRq : Power Off [ 78s] [ 67.204508] reboot: Power down [ 78s] ### VM INTERACTION END ### [ 78s] [ 78s] obs-arm-9 failed "build osmo-gbproxy.spec" at Mon Mar 28 00:37:40 UTC 2022. [ 78s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/osmo-trx in openSUSE_Leap_15.1_ARM/aarch64

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o… Package network:osmocom:nightly/osmo-trx failed to build in openSUSE_Leap_15.1_ARM/aarch64 Check out the package for editing: osc checkout network:osmocom:nightly osmo-trx Last lines of build log: [ 45s] checking for byteswap.h... yes [ 46s] checking for an ANSI C-conforming const... yes [ 46s] checking for inline... inline [ 46s] checking for size_t... yes [ 46s] checking whether time.h and sys/time.h may both be included... yes [ 46s] checking whether byte ordering is bigendian... no [ 46s] checking for libosmocore >= 1.6.0... no [ 46s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met: [ 46s] [ 46s] Package 'libsctp', required by 'libosmocore', not found [ 46s] [ 46s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 46s] installed software in a non-standard prefix. [ 46s] [ 46s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 46s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 46s] See the pkg-config man page for more details. [ 46s] error: Bad exit status from /var/tmp/rpm-tmp.AENr6w (%build) [ 46s] [ 46s] [ 46s] RPM build errors: [ 46s] Bad exit status from /var/tmp/rpm-tmp.AENr6w (%build) [ 46s] ### VM INTERACTION START ### [ 46s] [ 40.294355] sysrq: SysRq : Power Off [ 46s] [ 40.294905] reboot: Power down [ 46s] ### VM INTERACTION END ### [ 46s] [ 46s] obs-arm-11 failed "build osmo-trx.spec" at Mon Mar 28 00:37:32 UTC 2022. [ 46s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/osmo-gbproxy in openSUSE_Leap_15.1_ARM/armv7l

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o… Package network:osmocom:nightly/osmo-gbproxy failed to build in openSUSE_Leap_15.1_ARM/armv7l Check out the package for editing: osc checkout network:osmocom:nightly osmo-gbproxy Last lines of build log: [ 135s] checking whether to build static libraries... yes [ 135s] checking for pkg-config... /usr/bin/pkg-config [ 135s] checking for armv7hl-suse-linux-gnueabi-pkg-config... /usr/bin/armv7hl-suse-linux-gnueabi-pkg-config [ 135s] checking pkg-config is at least version 0.20... yes [ 137s] checking for library containing dlopen... -ldl [ 138s] checking for library containing dlsym... -ldl [ 138s] checking for libosmocore >= 1.6.0... no [ 138s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met: [ 138s] [ 138s] Package 'libsctp', required by 'libosmocore', not found [ 138s] [ 138s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 138s] installed software in a non-standard prefix. [ 138s] [ 138s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 138s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 138s] See the pkg-config man page for more details. [ 138s] error: Bad exit status from /var/tmp/rpm-tmp.gUULNt (%build) [ 138s] [ 138s] [ 138s] RPM build errors: [ 138s] Bad exit status from /var/tmp/rpm-tmp.gUULNt (%build) [ 138s] ### VM INTERACTION START ### [ 139s] [ 121.333149] sysrq: SysRq : Power Off [ 139s] [ 121.335819] reboot: Power down [ 139s] ### VM INTERACTION END ### [ 139s] [ 139s] obs-arm-6 failed "build osmo-gbproxy.spec" at Mon Mar 28 00:37:46 UTC 2022. [ 139s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/osmo-pcu in openSUSE_Leap_15.1_ARM/aarch64

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o… Package network:osmocom:nightly/osmo-pcu failed to build in openSUSE_Leap_15.1_ARM/aarch64 Check out the package for editing: osc checkout network:osmocom:nightly osmo-pcu Last lines of build log: [ 37s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 37s] checking how to hardcode library paths into programs... immediate [ 37s] checking for pkg-config... /usr/bin/pkg-config [ 37s] checking for aarch64-suse-linux-gnu-pkg-config... /usr/bin/aarch64-suse-linux-gnu-pkg-config [ 37s] checking pkg-config is at least version 0.20... yes [ 37s] checking for ANSI C header files... (cached) yes [ 37s] checking for libosmocore >= 1.6.0... no [ 37s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met: [ 37s] [ 37s] Package 'libsctp', required by 'libosmocore', not found [ 37s] [ 37s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 37s] installed software in a non-standard prefix. [ 37s] [ 37s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 37s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 37s] See the pkg-config man page for more details. [ 37s] error: Bad exit status from /var/tmp/rpm-tmp.Wu1eQy (%build) [ 37s] [ 37s] [ 37s] RPM build errors: [ 37s] Bad exit status from /var/tmp/rpm-tmp.Wu1eQy (%build) [ 37s] ### VM INTERACTION START ### [ 37s] [ 30.990137] sysrq: SysRq : Power Off [ 37s] [ 30.991775] reboot: Power down [ 37s] ### VM INTERACTION END ### [ 37s] [ 37s] obs-arm-10 failed "build osmo-pcu.spec" at Mon Mar 28 00:35:53 UTC 2022. [ 37s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/libosmo-abis in openSUSE_Leap_15.1_ARM/aarch64

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/l… Package network:osmocom:nightly/libosmo-abis failed to build in openSUSE_Leap_15.1_ARM/aarch64 Check out the package for editing: osc checkout network:osmocom:nightly libosmo-abis Last lines of build log: [ 38s] checking whether to build shared libraries... yes [ 38s] checking whether to build static libraries... no [ 38s] checking for pkg-config... /usr/bin/pkg-config [ 38s] checking for aarch64-suse-linux-gnu-pkg-config... /usr/bin/aarch64-suse-linux-gnu-pkg-config [ 38s] checking pkg-config is at least version 0.20... yes [ 38s] checking if gcc supports -fvisibility=hidden... yes [ 38s] checking for libosmocore >= 1.6.0... no [ 38s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met: [ 38s] [ 38s] Package 'libsctp', required by 'libosmocore', not found [ 38s] [ 38s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 38s] installed software in a non-standard prefix. [ 38s] [ 38s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 38s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 38s] See the pkg-config man page for more details. [ 38s] error: Bad exit status from /var/tmp/rpm-tmp.SX37jP (%build) [ 38s] [ 38s] [ 38s] RPM build errors: [ 38s] Bad exit status from /var/tmp/rpm-tmp.SX37jP (%build) [ 38s] ### VM INTERACTION START ### [ 38s] [ 32.117418] sysrq: SysRq : Power Off [ 38s] [ 32.119224] reboot: Power down [ 38s] ### VM INTERACTION END ### [ 38s] [ 38s] obs-arm-10 failed "build libosmo-abis.spec" at Mon Mar 28 00:35:33 UTC 2022. [ 38s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/osmo-sip-connector in openSUSE_Leap_15.1_ARM/aarch64

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o… Package network:osmocom:nightly/osmo-sip-connector failed to build in openSUSE_Leap_15.1_ARM/aarch64 Check out the package for editing: osc checkout network:osmocom:nightly osmo-sip-connector Last lines of build log: [ 34s] checking whether we are using the GNU C compiler... yes [ 34s] checking whether gcc accepts -g... yes [ 34s] checking for gcc option to accept ISO C89... none needed [ 34s] checking whether gcc understands -c and -o together... yes [ 34s] checking for style of include used by make... GNU [ 34s] checking dependency style of gcc... none [ 34s] checking for libosmocore >= 1.5.0... no [ 34s] configure: error: Package requirements (libosmocore >= 1.5.0) were not met: [ 34s] [ 34s] Package 'libsctp', required by 'libosmocore', not found [ 34s] [ 34s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 34s] installed software in a non-standard prefix. [ 34s] [ 34s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 34s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 34s] See the pkg-config man page for more details. [ 34s] error: Bad exit status from /var/tmp/rpm-tmp.K0hY9R (%build) [ 34s] [ 34s] [ 34s] RPM build errors: [ 34s] Bad exit status from /var/tmp/rpm-tmp.K0hY9R (%build) [ 34s] ### VM INTERACTION START ### [ 35s] [ 28.701115] sysrq: SysRq : Power Off [ 35s] [ 28.701701] reboot: Power down [ 35s] ### VM INTERACTION END ### [ 35s] [ 35s] obs-arm-11 failed "build osmo-sip-connector.spec" at Mon Mar 28 00:35:44 UTC 2022. [ 35s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/osmo-ggsn in openSUSE_Leap_15.1_ARM/aarch64

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o… Package network:osmocom:nightly/osmo-ggsn failed to build in openSUSE_Leap_15.1_ARM/aarch64 Check out the package for editing: osc checkout network:osmocom:nightly osmo-ggsn Last lines of build log: [ 39s] checking for getopt_long... yes [ 39s] checking whether build environment is sane... yes [ 40s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 40s] checking whether make sets $(MAKE)... yes [ 40s] checking for style of include used by make... GNU [ 40s] checking dependency style of gcc... none [ 40s] checking for libosmocore >= 1.5.0... no [ 40s] configure: error: Package requirements (libosmocore >= 1.5.0) were not met: [ 40s] [ 40s] Package 'libsctp', required by 'libosmocore', not found [ 40s] [ 40s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 40s] installed software in a non-standard prefix. [ 40s] [ 40s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 40s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 40s] See the pkg-config man page for more details. [ 40s] error: Bad exit status from /var/tmp/rpm-tmp.2bQJkX (%build) [ 40s] [ 40s] [ 40s] RPM build errors: [ 40s] Bad exit status from /var/tmp/rpm-tmp.2bQJkX (%build) [ 40s] ### VM INTERACTION START ### [ 41s] [ 34.805510] sysrq: SysRq : Power Off [ 41s] [ 34.807198] reboot: Power down [ 41s] ### VM INTERACTION END ### [ 41s] [ 41s] obs-arm-10 failed "build osmo-ggsn.spec" at Mon Mar 28 00:34:47 UTC 2022. [ 41s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/simtrace2 in openSUSE_Leap_15.1_ARM/aarch64

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/s… Package network:osmocom:nightly/simtrace2 failed to build in openSUSE_Leap_15.1_ARM/aarch64 Check out the package for editing: osc checkout network:osmocom:nightly simtrace2 Last lines of build log: [ 39s] checking whether to build shared libraries... yes [ 39s] checking whether to build static libraries... no [ 39s] checking for pkg-config... /usr/bin/pkg-config [ 39s] checking for aarch64-suse-linux-gnu-pkg-config... /usr/bin/aarch64-suse-linux-gnu-pkg-config [ 39s] checking pkg-config is at least version 0.20... yes [ 39s] checking if gcc supports -fvisibility=hidden... yes [ 39s] checking for libosmocore >= 1.4.0... no [ 39s] configure: error: Package requirements (libosmocore >= 1.4.0) were not met: [ 39s] [ 39s] Package 'libsctp', required by 'libosmocore', not found [ 39s] [ 39s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 39s] installed software in a non-standard prefix. [ 39s] [ 39s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 39s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 39s] See the pkg-config man page for more details. [ 39s] error: Bad exit status from /var/tmp/rpm-tmp.kjyE2F (%build) [ 39s] [ 39s] [ 39s] RPM build errors: [ 39s] Bad exit status from /var/tmp/rpm-tmp.kjyE2F (%build) [ 39s] ### VM INTERACTION START ### [ 40s] [ 32.991712] sysrq: SysRq : Power Off [ 40s] [ 32.992402] reboot: Power down [ 40s] ### VM INTERACTION END ### [ 40s] [ 40s] obs-arm-10 failed "build simtrace2.spec" at Mon Mar 28 00:34:50 UTC 2022. [ 40s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/libosmo-netif in openSUSE_Leap_15.1_ARM/aarch64

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/l… Package network:osmocom:nightly/libosmo-netif failed to build in openSUSE_Leap_15.1_ARM/aarch64 Check out the package for editing: osc checkout network:osmocom:nightly libosmo-netif Last lines of build log: [ 36s] checking syslog.h presence... yes [ 36s] checking for syslog.h... yes [ 36s] checking ctype.h usability... yes [ 36s] checking ctype.h presence... yes [ 36s] checking for ctype.h... yes [ 36s] checking if gcc supports -fvisibility=hidden... yes [ 36s] checking for libosmocore >= 1.5.0... no [ 36s] configure: error: Package requirements (libosmocore >= 1.5.0) were not met: [ 36s] [ 36s] Package 'libsctp', required by 'libosmocore', not found [ 36s] [ 36s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 36s] installed software in a non-standard prefix. [ 36s] [ 36s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 36s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 36s] See the pkg-config man page for more details. [ 36s] error: Bad exit status from /var/tmp/rpm-tmp.QSRWzf (%build) [ 36s] [ 36s] [ 36s] RPM build errors: [ 36s] Bad exit status from /var/tmp/rpm-tmp.QSRWzf (%build) [ 36s] ### VM INTERACTION START ### [ 37s] [ 31.096609] sysrq: SysRq : Power Off [ 37s] [ 31.097238] reboot: Power down [ 37s] ### VM INTERACTION END ### [ 37s] [ 37s] obs-arm-11 failed "build libosmo-netif.spec" at Mon Mar 28 00:34:39 UTC 2022. [ 37s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/osmo-pcap in openSUSE_Leap_15.1_ARM/aarch64

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o… Package network:osmocom:nightly/osmo-pcap failed to build in openSUSE_Leap_15.1_ARM/aarch64 Check out the package for editing: osc checkout network:osmocom:nightly osmo-pcap Last lines of build log: [ 30s] checking how to run the C preprocessor... gcc -E [ 31s] checking for grep that handles long lines and -e... /usr/bin/grep [ 31s] checking for egrep... /usr/bin/grep -E [ 31s] checking for ANSI C header files... yes [ 31s] checking whether to enable VTY tests... no [ 31s] checking for pcap-config... /usr/bin/pcap-config [ 31s] checking for libosmocore >= 1.6.0... no [ 31s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met: [ 31s] [ 31s] Package 'libsctp', required by 'libosmocore', not found [ 31s] [ 31s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 31s] installed software in a non-standard prefix. [ 31s] [ 31s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 31s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 31s] See the pkg-config man page for more details. [ 31s] error: Bad exit status from /var/tmp/rpm-tmp.adDZIm (%build) [ 31s] [ 31s] [ 31s] RPM build errors: [ 31s] Bad exit status from /var/tmp/rpm-tmp.adDZIm (%build) [ 31s] ### VM INTERACTION START ### [ 32s] [ 25.777350] sysrq: SysRq : Power Off [ 32s] [ 25.777905] reboot: Power down [ 32s] ### VM INTERACTION END ### [ 32s] [ 32s] obs-arm-11 failed "build osmo-pcap.spec" at Mon Mar 28 00:34:30 UTC 2022. [ 32s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/osmo-trx in openSUSE_Leap_15.1/x86_64

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o… Package network:osmocom:nightly/osmo-trx failed to build in openSUSE_Leap_15.1/x86_64 Check out the package for editing: osc checkout network:osmocom:nightly osmo-trx Last lines of build log: [ 67s] checking for byteswap.h... yes [ 67s] checking for an ANSI C-conforming const... yes [ 67s] checking for inline... inline [ 67s] checking for size_t... yes [ 67s] checking whether time.h and sys/time.h may both be included... yes [ 67s] checking whether byte ordering is bigendian... no [ 67s] checking for libosmocore >= 1.6.0... no [ 67s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met: [ 67s] [ 67s] Package 'libsctp', required by 'libosmocore', not found [ 67s] [ 67s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 67s] installed software in a non-standard prefix. [ 67s] [ 67s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 67s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 67s] See the pkg-config man page for more details. [ 67s] error: Bad exit status from /var/tmp/rpm-tmp.kcUaJp (%build) [ 67s] [ 67s] [ 67s] RPM build errors: [ 67s] Bad exit status from /var/tmp/rpm-tmp.kcUaJp (%build) [ 67s] ### VM INTERACTION START ### [ 67s] [ 55.835430] sysrq: SysRq : Power Off [ 67s] [ 55.838363] reboot: Power down [ 68s] ### VM INTERACTION END ### [ 68s] [ 68s] cloud105 failed "build osmo-trx.spec" at Mon Mar 28 00:34:41 UTC 2022. [ 68s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/osmo-pcu in openSUSE_Leap_15.1/x86_64

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o… Package network:osmocom:nightly/osmo-pcu failed to build in openSUSE_Leap_15.1/x86_64 Check out the package for editing: osc checkout network:osmocom:nightly osmo-pcu Last lines of build log: [ 35s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 35s] checking how to hardcode library paths into programs... immediate [ 35s] checking for pkg-config... /usr/bin/pkg-config [ 35s] checking for x86_64-suse-linux-gnu-pkg-config... /usr/bin/x86_64-suse-linux-gnu-pkg-config [ 35s] checking pkg-config is at least version 0.20... yes [ 35s] checking for ANSI C header files... (cached) yes [ 35s] checking for libosmocore >= 1.6.0... no [ 35s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met: [ 35s] [ 35s] Package 'libsctp', required by 'libosmocore', not found [ 35s] [ 35s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 35s] installed software in a non-standard prefix. [ 35s] [ 35s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 35s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 35s] See the pkg-config man page for more details. [ 35s] error: Bad exit status from /var/tmp/rpm-tmp.k8DQx4 (%build) [ 35s] [ 35s] [ 35s] RPM build errors: [ 35s] Bad exit status from /var/tmp/rpm-tmp.k8DQx4 (%build) [ 35s] ### VM INTERACTION START ### [ 35s] [ 30.079560] sysrq: SysRq : Power Off [ 35s] [ 30.081728] reboot: Power down [ 35s] ### VM INTERACTION END ### [ 35s] [ 35s] sheep87 failed "build osmo-pcu.spec" at Mon Mar 28 00:33:53 UTC 2022. [ 35s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/libosmo-abis in openSUSE_Leap_15.1/x86_64

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/l… Package network:osmocom:nightly/libosmo-abis failed to build in openSUSE_Leap_15.1/x86_64 Check out the package for editing: osc checkout network:osmocom:nightly libosmo-abis Last lines of build log: [ 37s] checking whether to build shared libraries... yes [ 37s] checking whether to build static libraries... no [ 37s] checking for pkg-config... /usr/bin/pkg-config [ 37s] checking for x86_64-suse-linux-gnu-pkg-config... /usr/bin/x86_64-suse-linux-gnu-pkg-config [ 37s] checking pkg-config is at least version 0.20... yes [ 38s] checking if gcc supports -fvisibility=hidden... yes [ 38s] checking for libosmocore >= 1.6.0... no [ 38s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met: [ 38s] [ 38s] Package 'libsctp', required by 'libosmocore', not found [ 38s] [ 38s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 38s] installed software in a non-standard prefix. [ 38s] [ 38s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 38s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 38s] See the pkg-config man page for more details. [ 38s] error: Bad exit status from /var/tmp/rpm-tmp.MujQqO (%build) [ 38s] [ 38s] [ 38s] RPM build errors: [ 38s] Bad exit status from /var/tmp/rpm-tmp.MujQqO (%build) [ 38s] ### VM INTERACTION START ### [ 38s] [ 32.791508] sysrq: SysRq : Power Off [ 38s] [ 32.793067] reboot: Power down [ 38s] ### VM INTERACTION END ### [ 38s] [ 38s] sheep88 failed "build libosmo-abis.spec" at Mon Mar 28 00:33:57 UTC 2022. [ 38s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/osmo-ggsn in openSUSE_Leap_15.1/x86_64

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o… Package network:osmocom:nightly/osmo-ggsn failed to build in openSUSE_Leap_15.1/x86_64 Check out the package for editing: osc checkout network:osmocom:nightly osmo-ggsn Last lines of build log: [ 38s] checking for getopt_long... yes [ 38s] checking whether build environment is sane... yes [ 38s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 38s] checking whether make sets $(MAKE)... yes [ 38s] checking for style of include used by make... GNU [ 38s] checking dependency style of gcc... none [ 38s] checking for libosmocore >= 1.5.0... no [ 38s] configure: error: Package requirements (libosmocore >= 1.5.0) were not met: [ 38s] [ 38s] Package 'libsctp', required by 'libosmocore', not found [ 38s] [ 38s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 38s] installed software in a non-standard prefix. [ 38s] [ 38s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 38s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 38s] See the pkg-config man page for more details. [ 38s] error: Bad exit status from /var/tmp/rpm-tmp.mm7OWV (%build) [ 38s] [ 38s] [ 38s] RPM build errors: [ 38s] Bad exit status from /var/tmp/rpm-tmp.mm7OWV (%build) [ 38s] ### VM INTERACTION START ### [ 39s] [ 33.502860] sysrq: SysRq : Power Off [ 39s] [ 33.504996] reboot: Power down [ 39s] ### VM INTERACTION END ### [ 39s] [ 39s] sheep86 failed "build osmo-ggsn.spec" at Mon Mar 28 00:33:57 UTC 2022. [ 39s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/libosmo-netif in openSUSE_Leap_15.1/x86_64

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/l… Package network:osmocom:nightly/libosmo-netif failed to build in openSUSE_Leap_15.1/x86_64 Check out the package for editing: osc checkout network:osmocom:nightly libosmo-netif Last lines of build log: [ 39s] checking syslog.h presence... yes [ 39s] checking for syslog.h... yes [ 39s] checking ctype.h usability... yes [ 39s] checking ctype.h presence... yes [ 39s] checking for ctype.h... yes [ 39s] checking if gcc supports -fvisibility=hidden... yes [ 39s] checking for libosmocore >= 1.5.0... no [ 39s] configure: error: Package requirements (libosmocore >= 1.5.0) were not met: [ 39s] [ 39s] Package 'libsctp', required by 'libosmocore', not found [ 39s] [ 39s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 39s] installed software in a non-standard prefix. [ 39s] [ 39s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 39s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 39s] See the pkg-config man page for more details. [ 39s] error: Bad exit status from /var/tmp/rpm-tmp.pKnOjh (%build) [ 39s] [ 39s] [ 39s] RPM build errors: [ 39s] Bad exit status from /var/tmp/rpm-tmp.pKnOjh (%build) [ 39s] ### VM INTERACTION START ### [ 40s] [ 33.892787] sysrq: SysRq : Power Off [ 40s] [ 33.895246] reboot: Power down [ 40s] ### VM INTERACTION END ### [ 40s] [ 40s] lamb57 failed "build libosmo-netif.spec" at Mon Mar 28 00:34:01 UTC 2022. [ 40s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/osmo-sip-connector in openSUSE_Leap_15.1/x86_64

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o… Package network:osmocom:nightly/osmo-sip-connector failed to build in openSUSE_Leap_15.1/x86_64 Check out the package for editing: osc checkout network:osmocom:nightly osmo-sip-connector Last lines of build log: [ 38s] checking whether we are using the GNU C compiler... yes [ 38s] checking whether gcc accepts -g... yes [ 38s] checking for gcc option to accept ISO C89... none needed [ 39s] checking whether gcc understands -c and -o together... yes [ 39s] checking for style of include used by make... GNU [ 39s] checking dependency style of gcc... none [ 39s] checking for libosmocore >= 1.5.0... no [ 39s] configure: error: Package requirements (libosmocore >= 1.5.0) were not met: [ 39s] [ 39s] Package 'libsctp', required by 'libosmocore', not found [ 39s] [ 39s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 39s] installed software in a non-standard prefix. [ 39s] [ 39s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 39s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 39s] See the pkg-config man page for more details. [ 39s] error: Bad exit status from /var/tmp/rpm-tmp.50MjAG (%build) [ 39s] [ 39s] [ 39s] RPM build errors: [ 39s] Bad exit status from /var/tmp/rpm-tmp.50MjAG (%build) [ 39s] ### VM INTERACTION START ### [ 40s] [ 33.088521] sysrq: SysRq : Power Off [ 40s] [ 33.092245] reboot: Power down [ 40s] ### VM INTERACTION END ### [ 40s] [ 40s] lamb55 failed "build osmo-sip-connector.spec" at Mon Mar 28 00:34:03 UTC 2022. [ 40s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/osmo-gbproxy in openSUSE_Leap_15.1/x86_64

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o… Package network:osmocom:nightly/osmo-gbproxy failed to build in openSUSE_Leap_15.1/x86_64 Check out the package for editing: osc checkout network:osmocom:nightly osmo-gbproxy Last lines of build log: [ 39s] checking whether to build static libraries... yes [ 39s] checking for pkg-config... /usr/bin/pkg-config [ 39s] checking for x86_64-suse-linux-gnu-pkg-config... /usr/bin/x86_64-suse-linux-gnu-pkg-config [ 39s] checking pkg-config is at least version 0.20... yes [ 39s] checking for library containing dlopen... -ldl [ 39s] checking for library containing dlsym... -ldl [ 39s] checking for libosmocore >= 1.6.0... no [ 39s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met: [ 39s] [ 39s] Package 'libsctp', required by 'libosmocore', not found [ 39s] [ 39s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 39s] installed software in a non-standard prefix. [ 39s] [ 39s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 39s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 39s] See the pkg-config man page for more details. [ 39s] error: Bad exit status from /var/tmp/rpm-tmp.d4EBjG (%build) [ 39s] [ 39s] [ 39s] RPM build errors: [ 39s] Bad exit status from /var/tmp/rpm-tmp.d4EBjG (%build) [ 39s] ### VM INTERACTION START ### [ 39s] [ 34.927129] sysrq: SysRq : Power Off [ 39s] [ 34.929353] reboot: Power down [ 39s] ### VM INTERACTION END ### [ 39s] [ 39s] hci-cnode1-m0 failed "build osmo-gbproxy.spec" at Mon Mar 28 00:33:59 UTC 2022. [ 39s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/osmo-pcap in openSUSE_Leap_15.1/x86_64

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o… Package network:osmocom:nightly/osmo-pcap failed to build in openSUSE_Leap_15.1/x86_64 Check out the package for editing: osc checkout network:osmocom:nightly osmo-pcap Last lines of build log: [ 40s] checking how to run the C preprocessor... gcc -E [ 40s] checking for grep that handles long lines and -e... /usr/bin/grep [ 40s] checking for egrep... /usr/bin/grep -E [ 40s] checking for ANSI C header files... yes [ 40s] checking whether to enable VTY tests... no [ 40s] checking for pcap-config... /usr/bin/pcap-config [ 40s] checking for libosmocore >= 1.6.0... no [ 40s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met: [ 40s] [ 40s] Package 'libsctp', required by 'libosmocore', not found [ 40s] [ 40s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 40s] installed software in a non-standard prefix. [ 40s] [ 40s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 40s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 40s] See the pkg-config man page for more details. [ 40s] error: Bad exit status from /var/tmp/rpm-tmp.SqME0E (%build) [ 40s] [ 40s] [ 40s] RPM build errors: [ 40s] Bad exit status from /var/tmp/rpm-tmp.SqME0E (%build) [ 40s] ### VM INTERACTION START ### [ 41s] [ 34.317630] sysrq: SysRq : Power Off [ 41s] [ 34.320315] reboot: Power down [ 41s] ### VM INTERACTION END ### [ 41s] [ 41s] lamb59 failed "build osmo-pcap.spec" at Mon Mar 28 00:34:04 UTC 2022. [ 41s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/simtrace2 in openSUSE_Leap_15.1/x86_64

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/s… Package network:osmocom:nightly/simtrace2 failed to build in openSUSE_Leap_15.1/x86_64 Check out the package for editing: osc checkout network:osmocom:nightly simtrace2 Last lines of build log: [ 45s] checking whether to build shared libraries... yes [ 45s] checking whether to build static libraries... no [ 45s] checking for pkg-config... /usr/bin/pkg-config [ 45s] checking for x86_64-suse-linux-gnu-pkg-config... /usr/bin/x86_64-suse-linux-gnu-pkg-config [ 45s] checking pkg-config is at least version 0.20... yes [ 45s] checking if gcc supports -fvisibility=hidden... yes [ 45s] checking for libosmocore >= 1.4.0... no [ 45s] configure: error: Package requirements (libosmocore >= 1.4.0) were not met: [ 45s] [ 45s] Package 'libsctp', required by 'libosmocore', not found [ 45s] [ 45s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 45s] installed software in a non-standard prefix. [ 45s] [ 45s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 45s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 45s] See the pkg-config man page for more details. [ 45s] error: Bad exit status from /var/tmp/rpm-tmp.RmjRGj (%build) [ 45s] [ 45s] [ 45s] RPM build errors: [ 45s] Bad exit status from /var/tmp/rpm-tmp.RmjRGj (%build) [ 45s] ### VM INTERACTION START ### [ 45s] [ 39.159747] sysrq: SysRq : Power Off [ 45s] [ 39.161971] reboot: Power down [ 45s] ### VM INTERACTION END ### [ 45s] [ 45s] lamb62 failed "build simtrace2.spec" at Mon Mar 28 00:34:07 UTC 2022. [ 45s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/osmo-trx in openSUSE_Leap_15.2/x86_64

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o… Package network:osmocom:nightly/osmo-trx failed to build in openSUSE_Leap_15.2/x86_64 Check out the package for editing: osc checkout network:osmocom:nightly osmo-trx Last lines of build log: [ 52s] checking for byteswap.h... yes [ 52s] checking for an ANSI C-conforming const... yes [ 52s] checking for inline... inline [ 53s] checking for size_t... yes [ 53s] checking whether time.h and sys/time.h may both be included... yes [ 53s] checking whether byte ordering is bigendian... no [ 53s] checking for libosmocore >= 1.6.0... no [ 53s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met: [ 53s] [ 53s] Package 'libsctp', required by 'libosmocore', not found [ 53s] [ 53s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 53s] installed software in a non-standard prefix. [ 53s] [ 53s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 53s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 53s] See the pkg-config man page for more details. [ 53s] error: Bad exit status from /var/tmp/rpm-tmp.SIemkt (%build) [ 53s] [ 53s] [ 53s] RPM build errors: [ 53s] Bad exit status from /var/tmp/rpm-tmp.SIemkt (%build) [ 53s] ### VM INTERACTION START ### [ 53s] [ 47.432882] sysrq: Power Off [ 53s] [ 47.437279] reboot: Power down [ 53s] ### VM INTERACTION END ### [ 53s] [ 53s] lamb06 failed "build osmo-trx.spec" at Mon Mar 28 00:33:06 UTC 2022. [ 53s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/osmo-ggsn in openSUSE_Leap_15.2/x86_64

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o… Package network:osmocom:nightly/osmo-ggsn failed to build in openSUSE_Leap_15.2/x86_64 Check out the package for editing: osc checkout network:osmocom:nightly osmo-ggsn Last lines of build log: [ 55s] checking for getopt_long... yes [ 55s] checking whether build environment is sane... yes [ 55s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 55s] checking whether make sets $(MAKE)... yes [ 55s] checking for style of include used by make... GNU [ 55s] checking dependency style of gcc... none [ 55s] checking for libosmocore >= 1.5.0... no [ 55s] configure: error: Package requirements (libosmocore >= 1.5.0) were not met: [ 55s] [ 55s] Package 'libsctp', required by 'libosmocore', not found [ 55s] [ 55s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 55s] installed software in a non-standard prefix. [ 55s] [ 55s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 55s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 55s] See the pkg-config man page for more details. [ 55s] error: Bad exit status from /var/tmp/rpm-tmp.D1h5ql (%build) [ 55s] [ 55s] [ 55s] RPM build errors: [ 55s] Bad exit status from /var/tmp/rpm-tmp.D1h5ql (%build) [ 55s] ### VM INTERACTION START ### [ 56s] [ 48.673797] sysrq: Power Off [ 56s] [ 48.682189] reboot: Power down [ 56s] ### VM INTERACTION END ### [ 56s] [ 56s] lamb24 failed "build osmo-ggsn.spec" at Mon Mar 28 00:32:48 UTC 2022. [ 56s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/osmo-pcu in openSUSE_Leap_15.2/x86_64

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o… Package network:osmocom:nightly/osmo-pcu failed to build in openSUSE_Leap_15.2/x86_64 Check out the package for editing: osc checkout network:osmocom:nightly osmo-pcu Last lines of build log: [ 45s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 45s] checking how to hardcode library paths into programs... immediate [ 45s] checking for pkg-config... /usr/bin/pkg-config [ 45s] checking for x86_64-suse-linux-gnu-pkg-config... /usr/bin/x86_64-suse-linux-gnu-pkg-config [ 45s] checking pkg-config is at least version 0.20... yes [ 45s] checking for ANSI C header files... (cached) yes [ 45s] checking for libosmocore >= 1.6.0... no [ 45s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met: [ 45s] [ 45s] Package 'libsctp', required by 'libosmocore', not found [ 45s] [ 45s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 45s] installed software in a non-standard prefix. [ 45s] [ 45s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 45s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 45s] See the pkg-config man page for more details. [ 45s] error: Bad exit status from /var/tmp/rpm-tmp.wygObn (%build) [ 45s] [ 45s] [ 45s] RPM build errors: [ 45s] Bad exit status from /var/tmp/rpm-tmp.wygObn (%build) [ 45s] ### VM INTERACTION START ### [ 46s] [ 39.101973] sysrq: Power Off [ 46s] [ 39.105258] reboot: Power down [ 46s] ### VM INTERACTION END ### [ 46s] [ 46s] lamb53 failed "build osmo-pcu.spec" at Mon Mar 28 00:32:36 UTC 2022. [ 46s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/libosmo-abis in openSUSE_Leap_15.2/x86_64

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/l… Package network:osmocom:nightly/libosmo-abis failed to build in openSUSE_Leap_15.2/x86_64 Check out the package for editing: osc checkout network:osmocom:nightly libosmo-abis Last lines of build log: [ 44s] checking whether to build shared libraries... yes [ 44s] checking whether to build static libraries... no [ 44s] checking for pkg-config... /usr/bin/pkg-config [ 44s] checking for x86_64-suse-linux-gnu-pkg-config... /usr/bin/x86_64-suse-linux-gnu-pkg-config [ 44s] checking pkg-config is at least version 0.20... yes [ 45s] checking if gcc supports -fvisibility=hidden... yes [ 45s] checking for libosmocore >= 1.6.0... no [ 45s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met: [ 45s] [ 45s] Package 'libsctp', required by 'libosmocore', not found [ 45s] [ 45s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 45s] installed software in a non-standard prefix. [ 45s] [ 45s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 45s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 45s] See the pkg-config man page for more details. [ 45s] error: Bad exit status from /var/tmp/rpm-tmp.KGBlBY (%build) [ 45s] [ 45s] [ 45s] RPM build errors: [ 45s] Bad exit status from /var/tmp/rpm-tmp.KGBlBY (%build) [ 45s] ### VM INTERACTION START ### [ 45s] [ 39.417239] sysrq: Power Off [ 45s] [ 39.420385] reboot: Power down [ 45s] ### VM INTERACTION END ### [ 45s] [ 45s] lamb11 failed "build libosmo-abis.spec" at Mon Mar 28 00:32:34 UTC 2022. [ 45s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/osmo-gbproxy in openSUSE_Leap_15.2/x86_64

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o… Package network:osmocom:nightly/osmo-gbproxy failed to build in openSUSE_Leap_15.2/x86_64 Check out the package for editing: osc checkout network:osmocom:nightly osmo-gbproxy Last lines of build log: [ 43s] checking whether to build static libraries... yes [ 43s] checking for pkg-config... /usr/bin/pkg-config [ 43s] checking for x86_64-suse-linux-gnu-pkg-config... /usr/bin/x86_64-suse-linux-gnu-pkg-config [ 43s] checking pkg-config is at least version 0.20... yes [ 43s] checking for library containing dlopen... -ldl [ 44s] checking for library containing dlsym... -ldl [ 44s] checking for libosmocore >= 1.6.0... no [ 44s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met: [ 44s] [ 44s] Package 'libsctp', required by 'libosmocore', not found [ 44s] [ 44s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 44s] installed software in a non-standard prefix. [ 44s] [ 44s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 44s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 44s] See the pkg-config man page for more details. [ 44s] error: Bad exit status from /var/tmp/rpm-tmp.rHkwvL (%build) [ 44s] [ 44s] [ 44s] RPM build errors: [ 44s] Bad exit status from /var/tmp/rpm-tmp.rHkwvL (%build) [ 44s] ### VM INTERACTION START ### [ 44s] [ 38.114274] sysrq: Power Off [ 44s] [ 38.117465] reboot: Power down [ 44s] ### VM INTERACTION END ### [ 44s] [ 44s] old-atreju4 failed "build osmo-gbproxy.spec" at Mon Mar 28 00:32:32 UTC 2022. [ 44s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/simtrace2 in openSUSE_Leap_15.2/x86_64

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/s… Package network:osmocom:nightly/simtrace2 failed to build in openSUSE_Leap_15.2/x86_64 Check out the package for editing: osc checkout network:osmocom:nightly simtrace2 Last lines of build log: [ 48s] checking whether to build shared libraries... yes [ 48s] checking whether to build static libraries... no [ 48s] checking for pkg-config... /usr/bin/pkg-config [ 48s] checking for x86_64-suse-linux-gnu-pkg-config... /usr/bin/x86_64-suse-linux-gnu-pkg-config [ 48s] checking pkg-config is at least version 0.20... yes [ 49s] checking if gcc supports -fvisibility=hidden... yes [ 49s] checking for libosmocore >= 1.4.0... no [ 49s] configure: error: Package requirements (libosmocore >= 1.4.0) were not met: [ 49s] [ 49s] Package 'libsctp', required by 'libosmocore', not found [ 49s] [ 49s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 49s] installed software in a non-standard prefix. [ 49s] [ 49s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 49s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 49s] See the pkg-config man page for more details. [ 49s] error: Bad exit status from /var/tmp/rpm-tmp.bg0KP0 (%build) [ 49s] [ 49s] [ 49s] RPM build errors: [ 49s] Bad exit status from /var/tmp/rpm-tmp.bg0KP0 (%build) [ 49s] ### VM INTERACTION START ### [ 49s] [ 42.363452] sysrq: Power Off [ 49s] [ 42.366284] reboot: Power down [ 49s] ### VM INTERACTION END ### [ 49s] [ 49s] lamb23 failed "build simtrace2.spec" at Mon Mar 28 00:32:39 UTC 2022. [ 49s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/libosmo-netif in openSUSE_Leap_15.2/x86_64

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/l… Package network:osmocom:nightly/libosmo-netif failed to build in openSUSE_Leap_15.2/x86_64 Check out the package for editing: osc checkout network:osmocom:nightly libosmo-netif Last lines of build log: [ 42s] checking syslog.h presence... yes [ 42s] checking for syslog.h... yes [ 42s] checking ctype.h usability... yes [ 42s] checking ctype.h presence... yes [ 42s] checking for ctype.h... yes [ 42s] checking if gcc supports -fvisibility=hidden... yes [ 42s] checking for libosmocore >= 1.5.0... no [ 42s] configure: error: Package requirements (libosmocore >= 1.5.0) were not met: [ 42s] [ 42s] Package 'libsctp', required by 'libosmocore', not found [ 42s] [ 42s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 42s] installed software in a non-standard prefix. [ 42s] [ 42s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 42s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 42s] See the pkg-config man page for more details. [ 42s] error: Bad exit status from /var/tmp/rpm-tmp.q0Smvs (%build) [ 42s] [ 42s] [ 42s] RPM build errors: [ 42s] Bad exit status from /var/tmp/rpm-tmp.q0Smvs (%build) [ 42s] ### VM INTERACTION START ### [ 43s] [ 36.883120] sysrq: Power Off [ 43s] [ 36.885779] reboot: Power down [ 43s] ### VM INTERACTION END ### [ 43s] [ 43s] lamb58 failed "build libosmo-netif.spec" at Mon Mar 28 00:32:33 UTC 2022. [ 43s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/osmo-sip-connector in openSUSE_Leap_15.2/x86_64

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o… Package network:osmocom:nightly/osmo-sip-connector failed to build in openSUSE_Leap_15.2/x86_64 Check out the package for editing: osc checkout network:osmocom:nightly osmo-sip-connector Last lines of build log: [ 32s] checking whether we are using the GNU C compiler... yes [ 32s] checking whether gcc accepts -g... yes [ 32s] checking for gcc option to accept ISO C89... none needed [ 32s] checking whether gcc understands -c and -o together... yes [ 32s] checking for style of include used by make... GNU [ 32s] checking dependency style of gcc... none [ 32s] checking for libosmocore >= 1.5.0... no [ 32s] configure: error: Package requirements (libosmocore >= 1.5.0) were not met: [ 32s] [ 32s] Package 'libsctp', required by 'libosmocore', not found [ 32s] [ 32s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 32s] installed software in a non-standard prefix. [ 32s] [ 32s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 32s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 32s] See the pkg-config man page for more details. [ 32s] error: Bad exit status from /var/tmp/rpm-tmp.YA226G (%build) [ 32s] [ 32s] [ 32s] RPM build errors: [ 32s] Bad exit status from /var/tmp/rpm-tmp.YA226G (%build) [ 32s] ### VM INTERACTION START ### [ 33s] [ 28.151628] sysrq: Power Off [ 33s] [ 28.155140] reboot: Power down [ 33s] ### VM INTERACTION END ### [ 33s] [ 33s] sheep88 failed "build osmo-sip-connector.spec" at Mon Mar 28 00:32:19 UTC 2022. [ 33s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/osmo-pcap in openSUSE_Leap_15.2/x86_64

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o… Package network:osmocom:nightly/osmo-pcap failed to build in openSUSE_Leap_15.2/x86_64 Check out the package for editing: osc checkout network:osmocom:nightly osmo-pcap Last lines of build log: [ 35s] checking how to run the C preprocessor... gcc -E [ 35s] checking for grep that handles long lines and -e... /usr/bin/grep [ 35s] checking for egrep... /usr/bin/grep -E [ 35s] checking for ANSI C header files... yes [ 35s] checking whether to enable VTY tests... no [ 35s] checking for pcap-config... /usr/bin/pcap-config [ 35s] checking for libosmocore >= 1.6.0... no [ 36s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met: [ 36s] [ 36s] Package 'libsctp', required by 'libosmocore', not found [ 36s] [ 36s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 36s] installed software in a non-standard prefix. [ 36s] [ 36s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 36s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 36s] See the pkg-config man page for more details. [ 36s] error: Bad exit status from /var/tmp/rpm-tmp.patfK2 (%build) [ 36s] [ 36s] [ 36s] RPM build errors: [ 36s] Bad exit status from /var/tmp/rpm-tmp.patfK2 (%build) [ 36s] ### VM INTERACTION START ### [ 36s] [ 29.696995] sysrq: Power Off [ 36s] [ 29.700878] reboot: Power down [ 36s] ### VM INTERACTION END ### [ 36s] [ 36s] lamb17 failed "build osmo-pcap.spec" at Mon Mar 28 00:32:25 UTC 2022. [ 36s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Change in libosmocore[master]: libosmovty: Link libosmovty against libpthread

by laforge

laforge has uploaded this change for review. ( https://gerrit.osmocom.org/c/libosmocore/+/27580 ) Change subject: libosmovty: Link libosmovty against libpthread ...................................................................... libosmovty: Link libosmovty against libpthread Ever since Change-Id If76a4bd2cc7b3c7adf5d84790a944d78be70e10a in 2020 (part of libosmocore >= 1.4.0) we have introduced cpu_sched_vty.c, which directly uses libpthread. As a result, libosmovty should be using pthread compiler flags and link against libpthread. This missing dependency is causing osmocom applications to fail to link on OpenWRT (at leats for ath79-generic). Change-Id: I7febbf88cbe61eacd05f46a9316e773b5c148e77 Related: SYS#4986 --- M src/vty/Makefile.am 1 file changed, 2 insertions(+), 2 deletions(-) git pull ssh://gerrit.osmocom.org:29418/libosmocore refs/changes/80/27580/1 diff --git a/src/vty/Makefile.am b/src/vty/Makefile.am index c73dbb2..37faad6 100644 --- a/src/vty/Makefile.am +++ b/src/vty/Makefile.am @@ -4,7 +4,7 @@ LIBVERSION=10:0:1 AM_CPPFLAGS = -I$(top_srcdir)/include -I$(top_builddir)/include -AM_CFLAGS = -Wall $(TALLOC_CFLAGS) +AM_CFLAGS = -Wall $(TALLOC_CFLAGS) $(PTHREAD_CFLAGS) if ENABLE_VTY lib_LTLIBRARIES = libosmovty.la @@ -14,5 +14,5 @@ fsm_vty.c talloc_ctx_vty.c \ cpu_sched_vty.c tdef_vty.c libosmovty_la_LDFLAGS = -version-info $(LIBVERSION) -no-undefined -libosmovty_la_LIBADD = $(top_builddir)/src/libosmocore.la $(TALLOC_LIBS) +libosmovty_la_LIBADD = $(top_builddir)/src/libosmocore.la $(TALLOC_LIBS) $(PTHREAD_LIBS) endif -- To view, visit https://gerrit.osmocom.org/c/libosmocore/+/27580 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: libosmocore Gerrit-Branch: master Gerrit-Change-Id: I7febbf88cbe61eacd05f46a9316e773b5c148e77 Gerrit-Change-Number: 27580 Gerrit-PatchSet: 1 Gerrit-Owner: laforge <laforge(a)osmocom.org> Gerrit-MessageType: newchange

2 years, 1 month

1
0
0 0

Change in osmo-e1d[master]: usb: Pass not just the actual transfer length but also the buffer size

by laforge

laforge has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-e1d/+/27578 ) Change subject: usb: Pass not just the actual transfer length but also the buffer size ...................................................................... usb: Pass not just the actual transfer length but also the buffer size Change-Id: I5088a5213d2945fdfaf3b242a63e35d0ed511914 --- M src/usb.c 1 file changed, 9 insertions(+), 7 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-e1d refs/changes/78/27578/1 diff --git a/src/usb.c b/src/usb.c index 40518d8..4d30742 100644 --- a/src/usb.c +++ b/src/usb.c @@ -104,7 +104,8 @@ struct libusb_transfer *xfr; }; -typedef int (*xfer_cb_t)(struct e1_usb_flow *flow, uint8_t *buf, int len); +/* len == actual length, size == underlying size of buffer */ +typedef int (*xfer_cb_t)(struct e1_usb_flow *flow, uint8_t *buf, int len, size_t size); struct e1_usb_flow { struct e1_line *line; @@ -124,7 +125,7 @@ // --------------------------------------------------------------------------- static int -e1_usb_xfer_in(struct e1_usb_flow *flow, uint8_t *buf, int len) +e1_usb_xfer_in(struct e1_usb_flow *flow, uint8_t *buf, int len, size_t size) { if (len == 0) return 0; @@ -132,7 +133,7 @@ } static int -e1_usb_xfer_out(struct e1_usb_flow *flow, uint8_t *buf, int len) +e1_usb_xfer_out(struct e1_usb_flow *flow, uint8_t *buf, int len, size_t size) { struct e1_line *line = flow->line; struct e1_usb_line_data *ld = (struct e1_usb_line_data *) line->drv_data; @@ -161,7 +162,7 @@ } static int -e1_usb_xfer_fb(struct e1_usb_flow *flow, uint8_t *buf, int len) +e1_usb_xfer_fb(struct e1_usb_flow *flow, uint8_t *buf, int len, size_t size) { struct e1_usb_line_data *ld = (struct e1_usb_line_data *) flow->line->drv_data; @@ -216,7 +217,8 @@ } flow->cb(flow, libusb_get_iso_packet_buffer_simple(xfr, j), - (iso_pd->status == LIBUSB_TRANSFER_COMPLETED) ? (int)iso_pd->actual_length : -1 + (iso_pd->status == LIBUSB_TRANSFER_COMPLETED) ? (int)iso_pd->actual_length : -1, + iso_pd->length ); len += (iso_pd->length = flow->size); } @@ -227,7 +229,7 @@ LOGPLI(flow->line, DE1D, LOGL_ERROR, "OUT EP %02x ISO packet %d failed with status %s\n", flow->ep, j, get_value_string(libusb_status_str, iso_pd->status)); } - len += (iso_pd->length = flow->cb(flow, &xfr->buffer[len], flow->size)); + len += (iso_pd->length = flow->cb(flow, &xfr->buffer[len], flow->size, flow->size)); } } @@ -300,7 +302,7 @@ len += (xfr->iso_packet_desc[j].length = flow->size); } else { for (j = 0; j < flow->ppx; j++) - len += (xfr->iso_packet_desc[j].length = flow->cb(flow, &flow->entries[i].buf[len], flow->size)); + len += (xfr->iso_packet_desc[j].length = flow->cb(flow, &flow->entries[i].buf[len], flow->size, flow->size)); } libusb_fill_iso_transfer(xfr, id->devh, flow->ep, -- To view, visit https://gerrit.osmocom.org/c/osmo-e1d/+/27578 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-e1d Gerrit-Branch: master Gerrit-Change-Id: I5088a5213d2945fdfaf3b242a63e35d0ed511914 Gerrit-Change-Number: 27578 Gerrit-PatchSet: 1 Gerrit-Owner: laforge <laforge(a)osmocom.org> Gerrit-MessageType: newchange

2 years, 1 month

1
0
0 0

Change in osmo-e1d[master]: usb: Deal with truncated ISO IN transfers

by laforge

laforge has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-e1d/+/27579 ) Change subject: usb: Deal with truncated ISO IN transfers ...................................................................... usb: Deal with truncated ISO IN transfers It seems that in some circumstances, an ISO IN transfer can be truncated by the bus / host. In such situation we'd currently pass a non-modulo-32 length to the mux_demux (deframer) code, and it ASSERTs on that. Let's try to handle this more gracefully by substituting random garbage and letting higher layers deal with massive bit errors. Related: OS#5490 Change-Id: Ic453325b93b0e12727625a1495a948d96df4b542 --- M src/usb.c 1 file changed, 24 insertions(+), 6 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-e1d refs/changes/79/27579/1 diff --git a/src/usb.c b/src/usb.c index 4d30742..074e836 100644 --- a/src/usb.c +++ b/src/usb.c @@ -201,9 +201,9 @@ { struct e1_usb_flow *flow = (struct e1_usb_flow *) xfr->user_data; struct e1_usb_intf_data *id = (struct e1_usb_intf_data *) flow->line->intf->drv_data; - int j, rv, len; + int j, rv, size; - len = 0; + size = 0; /* FIXME: Check transfer status ? Error handling ? */ @@ -211,16 +211,34 @@ if (flow->ep & 0x80) { for (j = 0; j < flow->ppx; j++) { struct libusb_iso_packet_descriptor *iso_pd = &xfr->iso_packet_desc[j]; + int len = (int) iso_pd->actual_length; if (iso_pd->status != LIBUSB_TRANSFER_COMPLETED) { LOGPLI(flow->line, DE1D, LOGL_ERROR, "IN EP %02x ISO packet %d failed with status %s\n", flow->ep, j, get_value_string(libusb_status_str, iso_pd->status)); + } else if (len > 4 && (len - 4) % 32) { + /* some ISO IN packet was truncated. Apparently this + * does happen, see https://osmocom.org/issues/5490 - + * there is little we can do here, but instead of the + * earlier ASSERT, we just feed some garbage for the + * last few timeslots, resulting in bit errors etc. */ + LOGPLI(flow->line, DE1D, LOGL_ERROR, "IN EP %02x ISO packet %d truncated: len-4 = %u\n", + flow->ep, j, len-4); + + /* The assumption here is that only the last E1 frame is + * truncated, as we have no idea how many E1 frames the + * USB device firmware wanted to send us. */ + len += 32 - (len % 32); + /* don't overflow the underlying buffer */ + if (len > (int) iso_pd->length) + len = iso_pd->length; } + flow->cb(flow, libusb_get_iso_packet_buffer_simple(xfr, j), - (iso_pd->status == LIBUSB_TRANSFER_COMPLETED) ? (int)iso_pd->actual_length : -1, + (iso_pd->status == LIBUSB_TRANSFER_COMPLETED) ? len : -1, iso_pd->length ); - len += (iso_pd->length = flow->size); + size += (iso_pd->length = flow->size); } } else { for (j = 0; j < flow->ppx; j++) { @@ -229,12 +247,12 @@ LOGPLI(flow->line, DE1D, LOGL_ERROR, "OUT EP %02x ISO packet %d failed with status %s\n", flow->ep, j, get_value_string(libusb_status_str, iso_pd->status)); } - len += (iso_pd->length = flow->cb(flow, &xfr->buffer[len], flow->size, flow->size)); + size += (iso_pd->length = flow->cb(flow, &xfr->buffer[size], flow->size, flow->size)); } } libusb_fill_iso_transfer(xfr, id->devh, flow->ep, - xfr->buffer, len, flow->ppx, + xfr->buffer, size, flow->ppx, _e1uf_xfr, flow, 0 ); -- To view, visit https://gerrit.osmocom.org/c/osmo-e1d/+/27579 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-e1d Gerrit-Branch: master Gerrit-Change-Id: Ic453325b93b0e12727625a1495a948d96df4b542 Gerrit-Change-Number: 27579 Gerrit-PatchSet: 1 Gerrit-Owner: laforge <laforge(a)osmocom.org> Gerrit-MessageType: newchange

2 years, 1 month

1
0
0 0

Change in osmo-e1d[master]: usb: rename 'size' to 'len' in callback functions

by laforge

laforge has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-e1d/+/27577 ) Change subject: usb: rename 'size' to 'len' in callback functions ...................................................................... usb: rename 'size' to 'len' in callback functions What we are passing is not the [underlying] size of the buffer, but the length of the valid data in them. Change-Id: I8ce91527351a56c103bd077c9565be2a81d175ac --- M src/usb.c 1 file changed, 11 insertions(+), 11 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-e1d refs/changes/77/27577/1 diff --git a/src/usb.c b/src/usb.c index 747b9c5..40518d8 100644 --- a/src/usb.c +++ b/src/usb.c @@ -104,7 +104,7 @@ struct libusb_transfer *xfr; }; -typedef int (*xfer_cb_t)(struct e1_usb_flow *flow, uint8_t *buf, int size); +typedef int (*xfer_cb_t)(struct e1_usb_flow *flow, uint8_t *buf, int len); struct e1_usb_flow { struct e1_line *line; @@ -124,22 +124,22 @@ // --------------------------------------------------------------------------- static int -e1_usb_xfer_in(struct e1_usb_flow *flow, uint8_t *buf, int size) +e1_usb_xfer_in(struct e1_usb_flow *flow, uint8_t *buf, int len) { - if (size == 0) + if (len == 0) return 0; - return e1_line_demux_in(flow->line, buf + 4, size - 4, buf[3] & 0xf); + return e1_line_demux_in(flow->line, buf + 4, len - 4, buf[3] & 0xf); } static int -e1_usb_xfer_out(struct e1_usb_flow *flow, uint8_t *buf, int size) +e1_usb_xfer_out(struct e1_usb_flow *flow, uint8_t *buf, int len) { struct e1_line *line = flow->line; struct e1_usb_line_data *ld = (struct e1_usb_line_data *) line->drv_data; int fm, fts; - if (size <= 0) { - LOGPLI(line, DXFR, LOGL_ERROR, "OUT ERROR: %d\n", size); + if (len <= 0) { + LOGPLI(line, DXFR, LOGL_ERROR, "OUT ERROR: %d\n", len); return -1; } @@ -161,15 +161,15 @@ } static int -e1_usb_xfer_fb(struct e1_usb_flow *flow, uint8_t *buf, int size) +e1_usb_xfer_fb(struct e1_usb_flow *flow, uint8_t *buf, int len) { struct e1_usb_line_data *ld = (struct e1_usb_line_data *) flow->line->drv_data; - if (size < 0) { + if (len < 0) { LOGPLI(flow->line, DE1D, LOGL_ERROR, "Feedback transfer error\n"); return 0; - } else if (size != 3) { - LOGPLI(flow->line, DE1D, LOGL_ERROR, "Feedback packet invalid size (%d)\n", size); + } else if (len != 3) { + LOGPLI(flow->line, DE1D, LOGL_ERROR, "Feedback packet invalid len (%d)\n", len); return 0; } -- To view, visit https://gerrit.osmocom.org/c/osmo-e1d/+/27577 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-e1d Gerrit-Branch: master Gerrit-Change-Id: I8ce91527351a56c103bd077c9565be2a81d175ac Gerrit-Change-Number: 27577 Gerrit-PatchSet: 1 Gerrit-Owner: laforge <laforge(a)osmocom.org> Gerrit-MessageType: newchange

2 years, 1 month

1
0
0 0

Change in pysim[master]: ts_31_103: Correct file-id of EF.DOMAIN in ADF.ISIM

by laforge

laforge has submitted this change. ( https://gerrit.osmocom.org/c/pysim/+/27575 ) Change subject: ts_31_103: Correct file-id of EF.DOMAIN in ADF.ISIM ...................................................................... ts_31_103: Correct file-id of EF.DOMAIN in ADF.ISIM While the short ID of this file is 05, the actual file-id is 6f03. Reference to TS 31.103 section 4.2.3. Change-Id: Idd572ab064ea38e74dffd583c27ea505b23214a2 --- M pySim/ts_31_103.py 1 file changed, 1 insertion(+), 1 deletion(-) Approvals: Jenkins Builder: Verified laforge: Looks good to me, approved diff --git a/pySim/ts_31_103.py b/pySim/ts_31_103.py index fb164ef..a4f7983 100644 --- a/pySim/ts_31_103.py +++ b/pySim/ts_31_103.py @@ -91,7 +91,7 @@ class domain(BER_TLV_IE, tag=0x80): _construct = GreedyString("utf8") - def __init__(self, fid='6f05', sfid=0x05, name='EF.DOMAIN', desc='Home Network Domain Name', **kwargs): + def __init__(self, fid='6f03', sfid=0x05, name='EF.DOMAIN', desc='Home Network Domain Name', **kwargs): super().__init__(fid=fid, sfid=sfid, name=name, desc=desc, **kwargs) self._tlv = EF_DOMAIN.domain -- To view, visit https://gerrit.osmocom.org/c/pysim/+/27575 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: pysim Gerrit-Branch: master Gerrit-Change-Id: Idd572ab064ea38e74dffd583c27ea505b23214a2 Gerrit-Change-Number: 27575 Gerrit-PatchSet: 2 Gerrit-Owner: astrid smith <astrid(a)shady.tel> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-MessageType: merged

2 years, 1 month

1
0
0 0

Change in pysim[master]: ts_31_103: Correct file-id of EF.DOMAIN in ADF.ISIM

by laforge

Attention is currently required from: astrid smith. laforge has posted comments on this change. ( https://gerrit.osmocom.org/c/pysim/+/27575 ) Change subject: ts_31_103: Correct file-id of EF.DOMAIN in ADF.ISIM ...................................................................... Patch Set 2: Code-Review+2 -- To view, visit https://gerrit.osmocom.org/c/pysim/+/27575 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: pysim Gerrit-Branch: master Gerrit-Change-Id: Idd572ab064ea38e74dffd583c27ea505b23214a2 Gerrit-Change-Number: 27575 Gerrit-PatchSet: 2 Gerrit-Owner: astrid smith <astrid(a)shady.tel> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Attention: astrid smith <astrid(a)shady.tel> Gerrit-Comment-Date: Sun, 27 Mar 2022 11:47:57 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

2 years, 1 month

1
0
0 0

Change in pysim[master]: ts_31_102: Avoid pylint false positive

by laforge

laforge has submitted this change. ( https://gerrit.osmocom.org/c/pysim/+/27576 ) Change subject: ts_31_102: Avoid pylint false positive ...................................................................... ts_31_102: Avoid pylint false positive This should avoid the following pylint error: ************* Module pySim.ts_31_102 pySim/ts_31_102.py:621:100: E0601: Using variable 'sw' before assignment (used-before-assignment) Change-Id: I0bb9607cdab0e6e3cd17b4d27129a51a607bc0f2 --- M pySim/ts_31_102.py 1 file changed, 1 insertion(+), 0 deletions(-) Approvals: Jenkins Builder: Verified laforge: Looks good to me, approved diff --git a/pySim/ts_31_102.py b/pySim/ts_31_102.py index fec81bf..fa3af75 100644 --- a/pySim/ts_31_102.py +++ b/pySim/ts_31_102.py @@ -609,6 +609,7 @@ should_exist = f.should_exist_for_services(active_services) try: cmd.rs.select_file(f) + sw = None exists = True except SwMatchError as e: sw = str(e) -- To view, visit https://gerrit.osmocom.org/c/pysim/+/27576 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: pysim Gerrit-Branch: master Gerrit-Change-Id: I0bb9607cdab0e6e3cd17b4d27129a51a607bc0f2 Gerrit-Change-Number: 27576 Gerrit-PatchSet: 1 Gerrit-Owner: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-MessageType: merged

2 years, 1 month

1
0
0 0

Change in pysim[master]: ts_31_102: Avoid pylint false positive

by laforge

laforge has posted comments on this change. ( https://gerrit.osmocom.org/c/pysim/+/27576 ) Change subject: ts_31_102: Avoid pylint false positive ...................................................................... Patch Set 1: Code-Review+2 -- To view, visit https://gerrit.osmocom.org/c/pysim/+/27576 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: pysim Gerrit-Branch: master Gerrit-Change-Id: I0bb9607cdab0e6e3cd17b4d27129a51a607bc0f2 Gerrit-Change-Number: 27576 Gerrit-PatchSet: 1 Gerrit-Owner: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Comment-Date: Sun, 27 Mar 2022 10:43:18 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

2 years, 1 month

1
0
0 0

Change in docker-playground[master]: gr-gsm-master: migrate from archlinux to debian-bullseye-build

by laforge

laforge has submitted this change. ( https://gerrit.osmocom.org/c/docker-playground/+/27574 ) Change subject: gr-gsm-master: migrate from archlinux to debian-bullseye-build ...................................................................... gr-gsm-master: migrate from archlinux to debian-bullseye-build Arch Linux ships gnuradio-3.9.4.0, while gr-gsm has not been migrated to 3.9 yet. Let's use debian:bullseye, which ships gnuradio-3.8.2.0. Change-Id: I9900addf152fd254283ef340cea16583ee5ac1c5 --- M gr-gsm-master/Dockerfile 1 file changed, 14 insertions(+), 70 deletions(-) Approvals: Jenkins Builder: Verified laforge: Looks good to me, approved diff --git a/gr-gsm-master/Dockerfile b/gr-gsm-master/Dockerfile index 71dc610..5e878c1 100644 --- a/gr-gsm-master/Dockerfile +++ b/gr-gsm-master/Dockerfile @@ -1,85 +1,29 @@ -ARG REGISTRY=docker.io -FROM ${REGISTRY}/archlinux/base +ARG REGISTRY=docker.io +ARG USER +FROM $USER/debian-bullseye-build MAINTAINER Vadim Yanitskiy <axilirator(a)gmail.com> -ARG LIBOSMOCORE_BRANCH="master" +RUN apt-get update && \ + apt-get install -y --no-install-recommends \ + libosmocore-dev \ + gnuradio-dev \ + gr-osmosdr \ + cmake \ + swig + ARG GR_GSM_BRANCH="master" -# Build dependencies -ENV BUILD_DEPS \ - automake \ - autoconf \ - libtool \ - pkgconf \ - cmake \ - make \ - swig \ - gcc - -# Sync pacman -RUN pacman -Syyu --noconfirm - -# Install persistent packages -RUN pacman -S --needed --noconfirm \ - gnuradio \ - python2 \ - python2-scipy \ - python2-requests \ - talloc \ - boost - -# Download USRP firmware -RUN uhd_images_downloader - -# Install build dependencies -RUN pacman -S --needed --noconfirm \ - $BUILD_DEPS - -# Make Python2 default -RUN ln -s /usr/bin/python2 /usr/bin/python - -# Install and configure git -RUN pacman -S --needed --noconfirm git \ - && git config --global user.email docker(a)dock.er \ - && git config --global user.name "Dock Er" - -WORKDIR /tmp - -# Download, build and install libosmocore -RUN git clone git://git.osmocom.org/libosmocore -ADD http://git.osmocom.org/libosmocore/patch?h=$LIBOSMOCORE_BRANCH /tmp/commit-libosmocore - -RUN cd libosmocore \ - && git fetch && git checkout -f -B $LIBOSMOCORE_BRANCH origin/$LIBOSMOCORE_BRANCH \ - && git rev-parse --abbrev-ref HEAD && git rev-parse HEAD \ - && autoreconf -fi \ - && ./configure \ - --disable-doxygen \ - --disable-pcsc \ - --prefix=/usr \ - && make "-j$(nproc)" \ - && make install \ - && make distclean - RUN git clone git://git.osmocom.org/gr-gsm ADD http://git.osmocom.org/gr-gsm/patch?h=$GR_GSM_BRANCH /tmp/commit-gr-gsm RUN cd gr-gsm \ && git fetch && git checkout -f -B $GR_GSM_BRANCH origin/$GR_GSM_BRANCH \ - && git rev-parse HEAD \ + && git rev-parse --abbrev-ref HEAD && git rev-parse HEAD \ && mkdir build/ \ && cd build/ \ - && cmake \ + && cmake .. \ -DCMAKE_INSTALL_PREFIX=/usr \ -Wno-dev \ - -DENABLE_GRCC=OFF \ - ../ \ && make "-j$(nproc)" \ - && make install \ - && cd ../ \ - && rm -rf build/ - -# Remove build dependencies -RUN pacman -Rs --noconfirm \ - $BUILD_DEPS + && make install -- To view, visit https://gerrit.osmocom.org/c/docker-playground/+/27574 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: docker-playground Gerrit-Branch: master Gerrit-Change-Id: I9900addf152fd254283ef340cea16583ee5ac1c5 Gerrit-Change-Number: 27574 Gerrit-PatchSet: 1 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-MessageType: merged

2 years, 1 month

1
0
0 0

Change in docker-playground[master]: gr-gsm-master: migrate from archlinux to debian-bullseye-build

by laforge

Attention is currently required from: fixeria. laforge has posted comments on this change. ( https://gerrit.osmocom.org/c/docker-playground/+/27574 ) Change subject: gr-gsm-master: migrate from archlinux to debian-bullseye-build ...................................................................... Patch Set 1: Code-Review+2 -- To view, visit https://gerrit.osmocom.org/c/docker-playground/+/27574 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: docker-playground Gerrit-Branch: master Gerrit-Change-Id: I9900addf152fd254283ef340cea16583ee5ac1c5 Gerrit-Change-Number: 27574 Gerrit-PatchSet: 1 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Comment-Date: Sun, 27 Mar 2022 10:37:36 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

2 years, 1 month

1
0
0 0

Change in pysim[master]: ts_31_103: Correct file-id of EF.DOMAIN in ADF.ISIM

by laforge

Attention is currently required from: astrid smith. laforge has posted comments on this change. ( https://gerrit.osmocom.org/c/pysim/+/27575 ) Change subject: ts_31_103: Correct file-id of EF.DOMAIN in ADF.ISIM ...................................................................... Patch Set 1: (1 comment) Patchset: PS1: > I suspect that the sysmoISIM-SJA2 in the testbed has an EF. […] The actual error from the log file is ************* Module pySim.ts_31_102 pySim/ts_31_102.py:621:100: E0601: Using variable 'sw' before assignment (used-before-assignment) So it appears that the most recent pylint is detecting a false positive here. I'm tryng to fix this in https://gerrit.osmocom.org/c/pysim/+/27576 and we can rebase your patch afterwards. -- To view, visit https://gerrit.osmocom.org/c/pysim/+/27575 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: pysim Gerrit-Branch: master Gerrit-Change-Id: Idd572ab064ea38e74dffd583c27ea505b23214a2 Gerrit-Change-Number: 27575 Gerrit-PatchSet: 1 Gerrit-Owner: astrid smith <astrid(a)shady.tel> Gerrit-Reviewer: Jenkins Builder Gerrit-CC: laforge <laforge(a)osmocom.org> Gerrit-Attention: astrid smith <astrid(a)shady.tel> Gerrit-Comment-Date: Sun, 27 Mar 2022 10:35:30 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Comment-In-Reply-To: astrid smith <astrid(a)shady.tel> Gerrit-MessageType: comment

2 years, 1 month

1
0
0 0

Change in pysim[master]: ts_31_102: Avoid pylint false positive

by laforge

laforge has uploaded this change for review. ( https://gerrit.osmocom.org/c/pysim/+/27576 ) Change subject: ts_31_102: Avoid pylint false positive ...................................................................... ts_31_102: Avoid pylint false positive This should avoid the following pylint error: ************* Module pySim.ts_31_102 pySim/ts_31_102.py:621:100: E0601: Using variable 'sw' before assignment (used-before-assignment) Change-Id: I0bb9607cdab0e6e3cd17b4d27129a51a607bc0f2 --- M pySim/ts_31_102.py 1 file changed, 1 insertion(+), 0 deletions(-) git pull ssh://gerrit.osmocom.org:29418/pysim refs/changes/76/27576/1 diff --git a/pySim/ts_31_102.py b/pySim/ts_31_102.py index fec81bf..fa3af75 100644 --- a/pySim/ts_31_102.py +++ b/pySim/ts_31_102.py @@ -609,6 +609,7 @@ should_exist = f.should_exist_for_services(active_services) try: cmd.rs.select_file(f) + sw = None exists = True except SwMatchError as e: sw = str(e) -- To view, visit https://gerrit.osmocom.org/c/pysim/+/27576 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: pysim Gerrit-Branch: master Gerrit-Change-Id: I0bb9607cdab0e6e3cd17b4d27129a51a607bc0f2 Gerrit-Change-Number: 27576 Gerrit-PatchSet: 1 Gerrit-Owner: laforge <laforge(a)osmocom.org> Gerrit-MessageType: newchange

2 years, 1 month

1
0
0 0

Change in pysim[master]: ts_31_103: Correct file-id of EF.DOMAIN in ADF.ISIM

by astrid smith

astrid smith has posted comments on this change. ( https://gerrit.osmocom.org/c/pysim/+/27575 ) Change subject: ts_31_103: Correct file-id of EF.DOMAIN in ADF.ISIM ...................................................................... Patch Set 1: (1 comment) Patchset: PS1: I suspect that the sysmoISIM-SJA2 in the testbed has an EF.DOMAIN file that is something other than "Not available", but I don't have access to see what's in it. -- To view, visit https://gerrit.osmocom.org/c/pysim/+/27575 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: pysim Gerrit-Branch: master Gerrit-Change-Id: Idd572ab064ea38e74dffd583c27ea505b23214a2 Gerrit-Change-Number: 27575 Gerrit-PatchSet: 1 Gerrit-Owner: astrid smith <astrid(a)shady.tel> Gerrit-Reviewer: Jenkins Builder Gerrit-Comment-Date: Sun, 27 Mar 2022 06:50:12 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Gerrit-MessageType: comment

2 years, 1 month

1
0
0 0

Change in pysim[master]: ts_31_103: Correct file-id of EF.DOMAIN in ADF.ISIM

by astrid smith

astrid smith has uploaded this change for review. ( https://gerrit.osmocom.org/c/pysim/+/27575 ) Change subject: ts_31_103: Correct file-id of EF.DOMAIN in ADF.ISIM ...................................................................... ts_31_103: Correct file-id of EF.DOMAIN in ADF.ISIM While the short ID of this file is 05, the actual file-id is 6f03. Reference to TS 31.103 section 4.2.3. Change-Id: Idd572ab064ea38e74dffd583c27ea505b23214a2 --- M pySim/ts_31_103.py 1 file changed, 1 insertion(+), 1 deletion(-) git pull ssh://gerrit.osmocom.org:29418/pysim refs/changes/75/27575/1 diff --git a/pySim/ts_31_103.py b/pySim/ts_31_103.py index fb164ef..a4f7983 100644 --- a/pySim/ts_31_103.py +++ b/pySim/ts_31_103.py @@ -91,7 +91,7 @@ class domain(BER_TLV_IE, tag=0x80): _construct = GreedyString("utf8") - def __init__(self, fid='6f05', sfid=0x05, name='EF.DOMAIN', desc='Home Network Domain Name', **kwargs): + def __init__(self, fid='6f03', sfid=0x05, name='EF.DOMAIN', desc='Home Network Domain Name', **kwargs): super().__init__(fid=fid, sfid=sfid, name=name, desc=desc, **kwargs) self._tlv = EF_DOMAIN.domain -- To view, visit https://gerrit.osmocom.org/c/pysim/+/27575 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: pysim Gerrit-Branch: master Gerrit-Change-Id: Idd572ab064ea38e74dffd583c27ea505b23214a2 Gerrit-Change-Number: 27575 Gerrit-PatchSet: 1 Gerrit-Owner: astrid smith <astrid(a)shady.tel> Gerrit-MessageType: newchange

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/osmo-trx in openSUSE_Leap_15.1_ARM/armv7l

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o… Package network:osmocom:nightly/osmo-trx failed to build in openSUSE_Leap_15.1_ARM/armv7l Check out the package for editing: osc checkout network:osmocom:nightly osmo-trx Last lines of build log: [ 108s] checking for byteswap.h... yes [ 109s] checking for an ANSI C-conforming const... yes [ 109s] checking for inline... inline [ 109s] checking for size_t... yes [ 109s] checking whether time.h and sys/time.h may both be included... yes [ 110s] checking whether byte ordering is bigendian... no [ 110s] checking for libosmocore >= 1.6.0... no [ 110s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met: [ 110s] [ 110s] Package 'libsctp', required by 'libosmocore', not found [ 110s] [ 110s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 110s] installed software in a non-standard prefix. [ 110s] [ 110s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 110s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 110s] See the pkg-config man page for more details. [ 110s] error: Bad exit status from /var/tmp/rpm-tmp.IeNWoD (%build) [ 110s] [ 110s] [ 110s] RPM build errors: [ 110s] Bad exit status from /var/tmp/rpm-tmp.IeNWoD (%build) [ 110s] ### VM INTERACTION START ### [ 110s] [ 94.125343] sysrq: SysRq : Power Off [ 110s] [ 94.127776] reboot: Power down [ 111s] ### VM INTERACTION END ### [ 111s] [ 111s] obs-arm-6 failed "build osmo-trx.spec" at Sun Mar 27 01:05:05 UTC 2022. [ 111s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

Build failure of network:osmocom:nightly/osmo-ggsn in openSUSE_Leap_15.1_ARM/armv7l

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o… Package network:osmocom:nightly/osmo-ggsn failed to build in openSUSE_Leap_15.1_ARM/armv7l Check out the package for editing: osc checkout network:osmocom:nightly osmo-ggsn Last lines of build log: [ 95s] checking for getopt_long... yes [ 95s] checking whether build environment is sane... yes [ 95s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 95s] checking whether make sets $(MAKE)... yes [ 95s] checking for style of include used by make... GNU [ 95s] checking dependency style of gcc... none [ 95s] checking for libosmocore >= 1.5.0... no [ 95s] configure: error: Package requirements (libosmocore >= 1.5.0) were not met: [ 95s] [ 95s] Package 'libsctp', required by 'libosmocore', not found [ 95s] [ 95s] Consider adjusting the PKG_CONFIG_PATH environment variable if you [ 95s] installed software in a non-standard prefix. [ 95s] [ 95s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS [ 95s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. [ 95s] See the pkg-config man page for more details. [ 95s] error: Bad exit status from /var/tmp/rpm-tmp.0lkJOM (%build) [ 95s] [ 95s] [ 95s] RPM build errors: [ 95s] Bad exit status from /var/tmp/rpm-tmp.0lkJOM (%build) [ 95s] ### VM INTERACTION START ### [ 96s] [ 80.381775] sysrq: SysRq : Power Off [ 96s] [ 80.383338] reboot: Power down [ 96s] ### VM INTERACTION END ### [ 96s] [ 96s] obs-arm-6 failed "build osmo-ggsn.spec" at Sun Mar 27 01:04:10 UTC 2022. [ 96s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 1 month

1
0
0 0

2024

2023

2022

gerrit-log March 2022