Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o…
Package network:osmocom:nightly/osmo-gbproxy failed to build in openSUSE_Leap_15.1/x86_64
Check out the package for editing:
osc checkout network:osmocom:nightly osmo-gbproxy
Last lines of build log:
[ 34s] checking whether to build static libraries... yes
[ 34s] checking for pkg-config... /usr/bin/pkg-config
[ 34s] checking for x86_64-suse-linux-gnu-pkg-config... /usr/bin/x86_64-suse-linux-gnu-pkg-config
[ 34s] checking pkg-config is at least version 0.20... yes
[ 34s] checking for library containing dlopen... -ldl
[ 34s] checking for library containing dlsym... -ldl
[ 34s] checking for libosmocore >= 1.6.0... no
[ 34s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met:
[ 34s]
[ 34s] Package 'libsctp', required by 'libosmocore', not found
[ 34s]
[ 34s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 34s] installed software in a non-standard prefix.
[ 34s]
[ 34s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 34s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 34s] See the pkg-config man page for more details.
[ 34s] error: Bad exit status from /var/tmp/rpm-tmp.7GogfS (%build)
[ 34s]
[ 34s]
[ 34s] RPM build errors:
[ 34s] Bad exit status from /var/tmp/rpm-tmp.7GogfS (%build)
[ 34s] ### VM INTERACTION START ###
[ 35s] [ 30.075374] sysrq: SysRq : Power Off
[ 35s] [ 30.077684] reboot: Power down
[ 35s] ### VM INTERACTION END ###
[ 35s]
[ 35s] sheep88 failed "build osmo-gbproxy.spec" at Sat Mar 26 01:22:52 UTC 2022.
[ 35s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o…
Package network:osmocom:nightly/osmo-ggsn failed to build in openSUSE_Leap_15.1_ARM/aarch64
Check out the package for editing:
osc checkout network:osmocom:nightly osmo-ggsn
Last lines of build log:
[ 76s] checking for getopt_long... yes
[ 76s] checking whether build environment is sane... yes
[ 76s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
[ 76s] checking whether make sets $(MAKE)... yes
[ 76s] checking for style of include used by make... GNU
[ 76s] checking dependency style of gcc... none
[ 76s] checking for libosmocore >= 1.5.0... no
[ 76s] configure: error: Package requirements (libosmocore >= 1.5.0) were not met:
[ 76s]
[ 76s] Package 'libsctp', required by 'libosmocore', not found
[ 76s]
[ 76s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 76s] installed software in a non-standard prefix.
[ 76s]
[ 76s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 76s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 76s] See the pkg-config man page for more details.
[ 76s] error: Bad exit status from /var/tmp/rpm-tmp.i7L5yg (%build)
[ 76s]
[ 76s]
[ 76s] RPM build errors:
[ 76s] Bad exit status from /var/tmp/rpm-tmp.i7L5yg (%build)
[ 76s] ### VM INTERACTION START ###
[ 77s] [ 68.169879] sysrq: SysRq : Power Off
[ 77s] [ 68.171212] reboot: Power down
[ 77s] ### VM INTERACTION END ###
[ 77s]
[ 77s] obs-arm-9 failed "build osmo-ggsn.spec" at Sat Mar 26 01:21:39 UTC 2022.
[ 77s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/l…
Package network:osmocom:nightly/libosmo-netif failed to build in openSUSE_Leap_15.1_ARM/armv7l
Check out the package for editing:
osc checkout network:osmocom:nightly libosmo-netif
Last lines of build log:
[ 80s] checking syslog.h presence... yes
[ 80s] checking for syslog.h... yes
[ 80s] checking ctype.h usability... yes
[ 80s] checking ctype.h presence... yes
[ 80s] checking for ctype.h... yes
[ 80s] checking if gcc supports -fvisibility=hidden... yes
[ 80s] checking for libosmocore >= 1.5.0... no
[ 80s] configure: error: Package requirements (libosmocore >= 1.5.0) were not met:
[ 80s]
[ 80s] Package 'libsctp', required by 'libosmocore', not found
[ 80s]
[ 80s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 80s] installed software in a non-standard prefix.
[ 80s]
[ 80s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 80s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 80s] See the pkg-config man page for more details.
[ 80s] error: Bad exit status from /var/tmp/rpm-tmp.gZY0gc (%build)
[ 80s]
[ 80s]
[ 80s] RPM build errors:
[ 80s] Bad exit status from /var/tmp/rpm-tmp.gZY0gc (%build)
[ 81s] ### VM INTERACTION START ###
[ 81s] [ 68.633546] sysrq: SysRq : Power Off
[ 81s] [ 68.637106] reboot: Power down
[ 81s] ### VM INTERACTION END ###
[ 81s]
[ 81s] obs-arm-5 failed "build libosmo-netif.spec" at Sat Mar 26 01:21:26 UTC 2022.
[ 81s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/s…
Package network:osmocom:nightly/simtrace2 failed to build in openSUSE_Leap_15.1/x86_64
Check out the package for editing:
osc checkout network:osmocom:nightly simtrace2
Last lines of build log:
[ 93s] checking whether to build shared libraries... yes
[ 93s] checking whether to build static libraries... no
[ 93s] checking for pkg-config... /usr/bin/pkg-config
[ 93s] checking for x86_64-suse-linux-gnu-pkg-config... /usr/bin/x86_64-suse-linux-gnu-pkg-config
[ 93s] checking pkg-config is at least version 0.20... yes
[ 93s] checking if gcc supports -fvisibility=hidden... yes
[ 93s] checking for libosmocore >= 1.4.0... no
[ 93s] configure: error: Package requirements (libosmocore >= 1.4.0) were not met:
[ 93s]
[ 93s] Package 'libsctp', required by 'libosmocore', not found
[ 93s]
[ 93s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 93s] installed software in a non-standard prefix.
[ 93s]
[ 93s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 93s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 93s] See the pkg-config man page for more details.
[ 93s] error: Bad exit status from /var/tmp/rpm-tmp.jxrMJP (%build)
[ 93s]
[ 93s]
[ 93s] RPM build errors:
[ 93s] Bad exit status from /var/tmp/rpm-tmp.jxrMJP (%build)
[ 93s] ### VM INTERACTION START ###
[ 93s] [ 76.112203] sysrq: SysRq : Power Off
[ 93s] [ 76.121460] reboot: Power down
[ 94s] ### VM INTERACTION END ###
[ 94s]
[ 94s] lamb27 failed "build simtrace2.spec" at Sat Mar 26 01:18:33 UTC 2022.
[ 94s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o…
Package network:osmocom:nightly/osmo-sip-connector failed to build in openSUSE_Leap_15.2/x86_64
Check out the package for editing:
osc checkout network:osmocom:nightly osmo-sip-connector
Last lines of build log:
[ 93s] checking whether we are using the GNU C compiler... yes
[ 93s] checking whether gcc accepts -g... yes
[ 93s] checking for gcc option to accept ISO C89... none needed
[ 93s] checking whether gcc understands -c and -o together... yes
[ 93s] checking for style of include used by make... GNU
[ 93s] checking dependency style of gcc... none
[ 93s] checking for libosmocore >= 1.5.0... no
[ 93s] configure: error: Package requirements (libosmocore >= 1.5.0) were not met:
[ 93s]
[ 93s] Package 'libsctp', required by 'libosmocore', not found
[ 93s]
[ 93s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 93s] installed software in a non-standard prefix.
[ 93s]
[ 93s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 93s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 93s] See the pkg-config man page for more details.
[ 93s] error: Bad exit status from /var/tmp/rpm-tmp.gd40yL (%build)
[ 93s]
[ 93s]
[ 93s] RPM build errors:
[ 93s] Bad exit status from /var/tmp/rpm-tmp.gd40yL (%build)
[ 93s] ### VM INTERACTION START ###
[ 94s] [ 74.845419] sysrq: Power Off
[ 94s] [ 74.866043] reboot: Power down
[ 94s] ### VM INTERACTION END ###
[ 94s]
[ 94s] lamb22 failed "build osmo-sip-connector.spec" at Sat Mar 26 01:18:35 UTC 2022.
[ 94s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o…
Package network:osmocom:nightly/osmo-gbproxy failed to build in openSUSE_Leap_15.1_ARM/aarch64
Check out the package for editing:
osc checkout network:osmocom:nightly osmo-gbproxy
Last lines of build log:
[ 51s] checking whether to build static libraries... yes
[ 51s] checking for pkg-config... /usr/bin/pkg-config
[ 51s] checking for aarch64-suse-linux-gnu-pkg-config... /usr/bin/aarch64-suse-linux-gnu-pkg-config
[ 51s] checking pkg-config is at least version 0.20... yes
[ 51s] checking for library containing dlopen... -ldl
[ 51s] checking for library containing dlsym... -ldl
[ 51s] checking for libosmocore >= 1.6.0... no
[ 51s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met:
[ 51s]
[ 51s] Package 'libsctp', required by 'libosmocore', not found
[ 51s]
[ 51s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 51s] installed software in a non-standard prefix.
[ 51s]
[ 51s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 51s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 51s] See the pkg-config man page for more details.
[ 51s] error: Bad exit status from /var/tmp/rpm-tmp.SqabK6 (%build)
[ 51s]
[ 51s]
[ 51s] RPM build errors:
[ 51s] Bad exit status from /var/tmp/rpm-tmp.SqabK6 (%build)
[ 51s] ### VM INTERACTION START ###
[ 66s] [ 44.891914] sysrq: SysRq : Power Off
[ 66s] [ 44.892627] reboot: Power down
[ 66s] ### VM INTERACTION END ###
[ 66s]
[ 66s] obs-arm-10 failed "build osmo-gbproxy.spec" at Sat Mar 26 01:17:54 UTC 2022.
[ 66s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/l…
Package network:osmocom:nightly/libosmo-abis failed to build in openSUSE_Leap_15.1_ARM/armv7l
Check out the package for editing:
osc checkout network:osmocom:nightly libosmo-abis
Last lines of build log:
[ 89s] checking whether to build shared libraries... yes
[ 89s] checking whether to build static libraries... no
[ 89s] checking for pkg-config... /usr/bin/pkg-config
[ 89s] checking for armv7hl-suse-linux-gnueabi-pkg-config... /usr/bin/armv7hl-suse-linux-gnueabi-pkg-config
[ 89s] checking pkg-config is at least version 0.20... yes
[ 89s] checking if gcc supports -fvisibility=hidden... yes
[ 89s] checking for libosmocore >= 1.6.0... no
[ 89s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met:
[ 89s]
[ 89s] Package 'libsctp', required by 'libosmocore', not found
[ 89s]
[ 89s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 89s] installed software in a non-standard prefix.
[ 89s]
[ 89s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 89s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 89s] See the pkg-config man page for more details.
[ 90s] error: Bad exit status from /var/tmp/rpm-tmp.yKJHCa (%build)
[ 90s]
[ 90s]
[ 90s] RPM build errors:
[ 90s] Bad exit status from /var/tmp/rpm-tmp.yKJHCa (%build)
[ 90s] ### VM INTERACTION START ###
[ 90s] [ 76.212422] sysrq: SysRq : Power Off
[ 90s] [ 76.222625] reboot: Power down
[ 90s] ### VM INTERACTION END ###
[ 90s]
[ 90s] obs-arm-5 failed "build libosmo-abis.spec" at Sat Mar 26 01:17:42 UTC 2022.
[ 90s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o…
Package network:osmocom:nightly/osmo-pcap failed to build in openSUSE_Leap_15.1_ARM/aarch64
Check out the package for editing:
osc checkout network:osmocom:nightly osmo-pcap
Last lines of build log:
[ 31s] checking how to run the C preprocessor... gcc -E
[ 31s] checking for grep that handles long lines and -e... /usr/bin/grep
[ 31s] checking for egrep... /usr/bin/grep -E
[ 31s] checking for ANSI C header files... yes
[ 31s] checking whether to enable VTY tests... no
[ 31s] checking for pcap-config... /usr/bin/pcap-config
[ 31s] checking for libosmocore >= 1.6.0... no
[ 31s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met:
[ 31s]
[ 31s] Package 'libsctp', required by 'libosmocore', not found
[ 31s]
[ 31s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 31s] installed software in a non-standard prefix.
[ 31s]
[ 31s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 31s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 31s] See the pkg-config man page for more details.
[ 31s] error: Bad exit status from /var/tmp/rpm-tmp.IZ0iWE (%build)
[ 31s]
[ 31s]
[ 31s] RPM build errors:
[ 31s] Bad exit status from /var/tmp/rpm-tmp.IZ0iWE (%build)
[ 31s] ### VM INTERACTION START ###
[ 32s] [ 23.957671] sysrq: SysRq : Power Off
[ 32s] [ 23.958507] reboot: Power down
[ 32s] ### VM INTERACTION END ###
[ 32s]
[ 32s] obs-arm-11 failed "build osmo-pcap.spec" at Sat Mar 26 01:14:18 UTC 2022.
[ 32s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o…
Package network:osmocom:nightly/osmo-gbproxy failed to build in openSUSE_Leap_15.2/x86_64
Check out the package for editing:
osc checkout network:osmocom:nightly osmo-gbproxy
Last lines of build log:
[ 42s] checking whether to build static libraries... yes
[ 42s] checking for pkg-config... /usr/bin/pkg-config
[ 42s] checking for x86_64-suse-linux-gnu-pkg-config... /usr/bin/x86_64-suse-linux-gnu-pkg-config
[ 42s] checking pkg-config is at least version 0.20... yes
[ 42s] checking for library containing dlopen... -ldl
[ 42s] checking for library containing dlsym... -ldl
[ 42s] checking for libosmocore >= 1.6.0... no
[ 42s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met:
[ 42s]
[ 42s] Package 'libsctp', required by 'libosmocore', not found
[ 42s]
[ 42s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 42s] installed software in a non-standard prefix.
[ 42s]
[ 42s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 42s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 42s] See the pkg-config man page for more details.
[ 43s] error: Bad exit status from /var/tmp/rpm-tmp.NQ9tOC (%build)
[ 43s]
[ 43s]
[ 43s] RPM build errors:
[ 43s] Bad exit status from /var/tmp/rpm-tmp.NQ9tOC (%build)
[ 43s] ### VM INTERACTION START ###
[ 43s] [ 37.589468] sysrq: Power Off
[ 43s] [ 37.593358] reboot: Power down
[ 43s] ### VM INTERACTION END ###
[ 43s]
[ 43s] lamb06 failed "build osmo-gbproxy.spec" at Sat Mar 26 01:12:43 UTC 2022.
[ 43s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o…
Package network:osmocom:nightly/osmo-sip-connector failed to build in openSUSE_Leap_15.1/x86_64
Check out the package for editing:
osc checkout network:osmocom:nightly osmo-sip-connector
Last lines of build log:
[ 35s] checking whether we are using the GNU C compiler... yes
[ 35s] checking whether gcc accepts -g... yes
[ 35s] checking for gcc option to accept ISO C89... none needed
[ 35s] checking whether gcc understands -c and -o together... yes
[ 35s] checking for style of include used by make... GNU
[ 35s] checking dependency style of gcc... none
[ 35s] checking for libosmocore >= 1.5.0... no
[ 35s] configure: error: Package requirements (libosmocore >= 1.5.0) were not met:
[ 35s]
[ 35s] Package 'libsctp', required by 'libosmocore', not found
[ 35s]
[ 35s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 35s] installed software in a non-standard prefix.
[ 35s]
[ 35s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 35s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 35s] See the pkg-config man page for more details.
[ 35s] error: Bad exit status from /var/tmp/rpm-tmp.w4lNSG (%build)
[ 35s]
[ 35s]
[ 35s] RPM build errors:
[ 35s] Bad exit status from /var/tmp/rpm-tmp.w4lNSG (%build)
[ 35s] ### VM INTERACTION START ###
[ 36s] [ 30.739731] sysrq: SysRq : Power Off
[ 36s] [ 30.741142] reboot: Power down
[ 36s] ### VM INTERACTION END ###
[ 36s]
[ 36s] sheep87 failed "build osmo-sip-connector.spec" at Sat Mar 26 01:12:35 UTC 2022.
[ 36s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/l…
Package network:osmocom:nightly/libosmo-netif failed to build in openSUSE_Leap_15.1_ARM/aarch64
Check out the package for editing:
osc checkout network:osmocom:nightly libosmo-netif
Last lines of build log:
[ 56s] checking syslog.h presence... yes
[ 56s] checking for syslog.h... yes
[ 56s] checking ctype.h usability... yes
[ 56s] checking ctype.h presence... yes
[ 56s] checking for ctype.h... yes
[ 56s] checking if gcc supports -fvisibility=hidden... yes
[ 56s] checking for libosmocore >= 1.5.0... no
[ 56s] configure: error: Package requirements (libosmocore >= 1.5.0) were not met:
[ 56s]
[ 56s] Package 'libsctp', required by 'libosmocore', not found
[ 56s]
[ 56s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 56s] installed software in a non-standard prefix.
[ 56s]
[ 56s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 56s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 56s] See the pkg-config man page for more details.
[ 57s] error: Bad exit status from /var/tmp/rpm-tmp.o1zBN0 (%build)
[ 57s]
[ 57s]
[ 57s] RPM build errors:
[ 57s] Bad exit status from /var/tmp/rpm-tmp.o1zBN0 (%build)
[ 57s] ### VM INTERACTION START ###
[ 64s] [ 44.795541] sysrq: SysRq : Power Off
[ 64s] [ 44.796177] reboot: Power down
[ 64s] ### VM INTERACTION END ###
[ 64s]
[ 64s] obs-arm-10 failed "build libosmo-netif.spec" at Sat Mar 26 01:11:19 UTC 2022.
[ 64s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o…
Package network:osmocom:nightly/osmo-pcap failed to build in openSUSE_Leap_15.2/x86_64
Check out the package for editing:
osc checkout network:osmocom:nightly osmo-pcap
Last lines of build log:
[ 37s] checking how to run the C preprocessor... gcc -E
[ 37s] checking for grep that handles long lines and -e... /usr/bin/grep
[ 37s] checking for egrep... /usr/bin/grep -E
[ 37s] checking for ANSI C header files... yes
[ 37s] checking whether to enable VTY tests... no
[ 37s] checking for pcap-config... /usr/bin/pcap-config
[ 37s] checking for libosmocore >= 1.6.0... no
[ 37s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met:
[ 37s]
[ 37s] Package 'libsctp', required by 'libosmocore', not found
[ 37s]
[ 37s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 37s] installed software in a non-standard prefix.
[ 37s]
[ 37s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 37s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 37s] See the pkg-config man page for more details.
[ 37s] error: Bad exit status from /var/tmp/rpm-tmp.6CUvnJ (%build)
[ 37s]
[ 37s]
[ 37s] RPM build errors:
[ 37s] Bad exit status from /var/tmp/rpm-tmp.6CUvnJ (%build)
[ 37s] ### VM INTERACTION START ###
[ 38s] [ 31.392785] sysrq: Power Off
[ 38s] [ 31.396131] reboot: Power down
[ 38s] ### VM INTERACTION END ###
[ 38s]
[ 38s] lamb16 failed "build osmo-pcap.spec" at Sat Mar 26 01:09:43 UTC 2022.
[ 38s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o…
Package network:osmocom:nightly/osmo-pcu failed to build in openSUSE_Leap_15.1_ARM/aarch64
Check out the package for editing:
osc checkout network:osmocom:nightly osmo-pcu
Last lines of build log:
[ 55s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so
[ 55s] checking how to hardcode library paths into programs... immediate
[ 55s] checking for pkg-config... /usr/bin/pkg-config
[ 55s] checking for aarch64-suse-linux-gnu-pkg-config... /usr/bin/aarch64-suse-linux-gnu-pkg-config
[ 55s] checking pkg-config is at least version 0.20... yes
[ 55s] checking for ANSI C header files... (cached) yes
[ 55s] checking for libosmocore >= 1.6.0... no
[ 55s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met:
[ 55s]
[ 55s] Package 'libsctp', required by 'libosmocore', not found
[ 55s]
[ 55s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 55s] installed software in a non-standard prefix.
[ 55s]
[ 55s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 55s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 55s] See the pkg-config man page for more details.
[ 55s] error: Bad exit status from /var/tmp/rpm-tmp.wGreph (%build)
[ 55s]
[ 55s]
[ 55s] RPM build errors:
[ 55s] Bad exit status from /var/tmp/rpm-tmp.wGreph (%build)
[ 55s] ### VM INTERACTION START ###
[ 69s] [ 41.310758] sysrq: SysRq : Power Off
[ 69s] [ 41.325104] reboot: Power down
[ 69s] ### VM INTERACTION END ###
[ 69s]
[ 69s] obs-arm-10 failed "build osmo-pcu.spec" at Sat Mar 26 01:08:01 UTC 2022.
[ 69s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/l…
Package network:osmocom:nightly/libosmo-netif failed to build in openSUSE_Leap_15.1/x86_64
Check out the package for editing:
osc checkout network:osmocom:nightly libosmo-netif
Last lines of build log:
[ 43s] checking syslog.h presence... yes
[ 43s] checking for syslog.h... yes
[ 43s] checking ctype.h usability... yes
[ 43s] checking ctype.h presence... yes
[ 43s] checking for ctype.h... yes
[ 43s] checking if gcc supports -fvisibility=hidden... yes
[ 43s] checking for libosmocore >= 1.5.0... no
[ 43s] configure: error: Package requirements (libosmocore >= 1.5.0) were not met:
[ 43s]
[ 43s] Package 'libsctp', required by 'libosmocore', not found
[ 43s]
[ 43s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 43s] installed software in a non-standard prefix.
[ 43s]
[ 43s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 43s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 43s] See the pkg-config man page for more details.
[ 44s] error: Bad exit status from /var/tmp/rpm-tmp.71cPXC (%build)
[ 44s]
[ 44s]
[ 44s] RPM build errors:
[ 44s] Bad exit status from /var/tmp/rpm-tmp.71cPXC (%build)
[ 44s] ### VM INTERACTION START ###
[ 44s] [ 37.837110] sysrq: SysRq : Power Off
[ 44s] [ 37.842150] reboot: Power down
[ 44s] ### VM INTERACTION END ###
[ 44s]
[ 44s] lamb07 failed "build libosmo-netif.spec" at Sat Mar 26 01:04:54 UTC 2022.
[ 44s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/s…
Package network:osmocom:nightly/simtrace2 failed to build in openSUSE_Leap_15.2/x86_64
Check out the package for editing:
osc checkout network:osmocom:nightly simtrace2
Last lines of build log:
[ 39s] checking whether to build shared libraries... yes
[ 39s] checking whether to build static libraries... no
[ 39s] checking for pkg-config... /usr/bin/pkg-config
[ 39s] checking for x86_64-suse-linux-gnu-pkg-config... /usr/bin/x86_64-suse-linux-gnu-pkg-config
[ 39s] checking pkg-config is at least version 0.20... yes
[ 39s] checking if gcc supports -fvisibility=hidden... yes
[ 39s] checking for libosmocore >= 1.4.0... no
[ 39s] configure: error: Package requirements (libosmocore >= 1.4.0) were not met:
[ 39s]
[ 39s] Package 'libsctp', required by 'libosmocore', not found
[ 39s]
[ 39s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 39s] installed software in a non-standard prefix.
[ 39s]
[ 39s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 39s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 39s] See the pkg-config man page for more details.
[ 39s] error: Bad exit status from /var/tmp/rpm-tmp.axNjJ7 (%build)
[ 39s]
[ 39s]
[ 39s] RPM build errors:
[ 39s] Bad exit status from /var/tmp/rpm-tmp.axNjJ7 (%build)
[ 39s] ### VM INTERACTION START ###
[ 40s] [ 34.151622] sysrq: Power Off
[ 40s] [ 34.153790] reboot: Power down
[ 40s] ### VM INTERACTION END ###
[ 40s]
[ 40s] sheep85 failed "build simtrace2.spec" at Sat Mar 26 01:04:46 UTC 2022.
[ 40s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o…
Package network:osmocom:nightly/osmo-pcap failed to build in openSUSE_Leap_15.1/x86_64
Check out the package for editing:
osc checkout network:osmocom:nightly osmo-pcap
Last lines of build log:
[ 80s] checking how to run the C preprocessor... gcc -E
[ 80s] checking for grep that handles long lines and -e... /usr/bin/grep
[ 80s] checking for egrep... /usr/bin/grep -E
[ 81s] checking for ANSI C header files... yes
[ 81s] checking whether to enable VTY tests... no
[ 81s] checking for pcap-config... /usr/bin/pcap-config
[ 81s] checking for libosmocore >= 1.6.0... no
[ 81s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met:
[ 81s]
[ 81s] Package 'libsctp', required by 'libosmocore', not found
[ 81s]
[ 81s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 81s] installed software in a non-standard prefix.
[ 81s]
[ 81s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 81s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 81s] See the pkg-config man page for more details.
[ 81s] error: Bad exit status from /var/tmp/rpm-tmp.Ar6VRI (%build)
[ 81s]
[ 81s]
[ 81s] RPM build errors:
[ 81s] Bad exit status from /var/tmp/rpm-tmp.Ar6VRI (%build)
[ 81s] ### VM INTERACTION START ###
[ 81s] [ 65.589173] sysrq: SysRq : Power Off
[ 81s] [ 65.609482] reboot: Power down
[ 81s] ### VM INTERACTION END ###
[ 81s]
[ 81s] lamb59 failed "build osmo-pcap.spec" at Sat Mar 26 01:03:11 UTC 2022.
[ 81s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o…
Package network:osmocom:nightly/osmo-sip-connector failed to build in openSUSE_Leap_15.1_ARM/aarch64
Check out the package for editing:
osc checkout network:osmocom:nightly osmo-sip-connector
Last lines of build log:
[ 48s] checking whether we are using the GNU C compiler... yes
[ 48s] checking whether gcc accepts -g... yes
[ 48s] checking for gcc option to accept ISO C89... none needed
[ 48s] checking whether gcc understands -c and -o together... yes
[ 48s] checking for style of include used by make... GNU
[ 48s] checking dependency style of gcc... none
[ 48s] checking for libosmocore >= 1.5.0... no
[ 48s] configure: error: Package requirements (libosmocore >= 1.5.0) were not met:
[ 48s]
[ 48s] Package 'libsctp', required by 'libosmocore', not found
[ 48s]
[ 48s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 48s] installed software in a non-standard prefix.
[ 48s]
[ 48s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 48s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 48s] See the pkg-config man page for more details.
[ 48s] error: Bad exit status from /var/tmp/rpm-tmp.cAqJUr (%build)
[ 48s]
[ 48s]
[ 48s] RPM build errors:
[ 48s] Bad exit status from /var/tmp/rpm-tmp.cAqJUr (%build)
[ 48s] ### VM INTERACTION START ###
[ 50s] [ 30.446019] sysrq: SysRq : Power Off
[ 50s] [ 30.446829] reboot: Power down
[ 51s] ### VM INTERACTION END ###
[ 51s]
[ 51s] obs-arm-10 failed "build osmo-sip-connector.spec" at Sat Mar 26 00:59:49 UTC 2022.
[ 51s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/l…
Package network:osmocom:nightly/libosmo-abis failed to build in openSUSE_Leap_15.2/x86_64
Check out the package for editing:
osc checkout network:osmocom:nightly libosmo-abis
Last lines of build log:
[ 48s] checking whether to build shared libraries... yes
[ 48s] checking whether to build static libraries... no
[ 48s] checking for pkg-config... /usr/bin/pkg-config
[ 48s] checking for x86_64-suse-linux-gnu-pkg-config... /usr/bin/x86_64-suse-linux-gnu-pkg-config
[ 48s] checking pkg-config is at least version 0.20... yes
[ 48s] checking if gcc supports -fvisibility=hidden... yes
[ 48s] checking for libosmocore >= 1.6.0... no
[ 48s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met:
[ 48s]
[ 48s] Package 'libsctp', required by 'libosmocore', not found
[ 48s]
[ 48s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 48s] installed software in a non-standard prefix.
[ 48s]
[ 48s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 48s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 48s] See the pkg-config man page for more details.
[ 48s] error: Bad exit status from /var/tmp/rpm-tmp.Gt9ws6 (%build)
[ 48s]
[ 48s]
[ 48s] RPM build errors:
[ 48s] Bad exit status from /var/tmp/rpm-tmp.Gt9ws6 (%build)
[ 48s] ### VM INTERACTION START ###
[ 49s] [ 42.490286] sysrq: Power Off
[ 49s] [ 42.492482] reboot: Power down
[ 49s] ### VM INTERACTION END ###
[ 49s]
[ 49s] lamb15 failed "build libosmo-abis.spec" at Sat Mar 26 00:56:50 UTC 2022.
[ 49s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/s…
Package network:osmocom:nightly/simtrace2 failed to build in openSUSE_Leap_15.1_ARM/aarch64
Check out the package for editing:
osc checkout network:osmocom:nightly simtrace2
Last lines of build log:
[ 66s] checking whether to build shared libraries... yes
[ 66s] checking whether to build static libraries... no
[ 66s] checking for pkg-config... /usr/bin/pkg-config
[ 66s] checking for aarch64-suse-linux-gnu-pkg-config... /usr/bin/aarch64-suse-linux-gnu-pkg-config
[ 66s] checking pkg-config is at least version 0.20... yes
[ 66s] checking if gcc supports -fvisibility=hidden... yes
[ 66s] checking for libosmocore >= 1.4.0... no
[ 66s] configure: error: Package requirements (libosmocore >= 1.4.0) were not met:
[ 66s]
[ 66s] Package 'libsctp', required by 'libosmocore', not found
[ 66s]
[ 66s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 66s] installed software in a non-standard prefix.
[ 66s]
[ 66s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 66s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 66s] See the pkg-config man page for more details.
[ 66s] error: Bad exit status from /var/tmp/rpm-tmp.Yi4Mpq (%build)
[ 66s]
[ 66s]
[ 66s] RPM build errors:
[ 66s] Bad exit status from /var/tmp/rpm-tmp.Yi4Mpq (%build)
[ 66s] ### VM INTERACTION START ###
[ 95s] [ 57.884816] sysrq: SysRq : Power Off
[ 95s] [ 57.893886] reboot: Power down
[ 95s] ### VM INTERACTION END ###
[ 95s]
[ 95s] obs-arm-10 failed "build simtrace2.spec" at Sat Mar 26 00:54:36 UTC 2022.
[ 95s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/l…
Package network:osmocom:nightly/libosmo-abis failed to build in openSUSE_Leap_15.1_ARM/aarch64
Check out the package for editing:
osc checkout network:osmocom:nightly libosmo-abis
Last lines of build log:
[ 47s] checking whether to build shared libraries... yes
[ 47s] checking whether to build static libraries... no
[ 47s] checking for pkg-config... /usr/bin/pkg-config
[ 47s] checking for aarch64-suse-linux-gnu-pkg-config... /usr/bin/aarch64-suse-linux-gnu-pkg-config
[ 47s] checking pkg-config is at least version 0.20... yes
[ 48s] checking if gcc supports -fvisibility=hidden... yes
[ 48s] checking for libosmocore >= 1.6.0... no
[ 48s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met:
[ 48s]
[ 48s] Package 'libsctp', required by 'libosmocore', not found
[ 48s]
[ 48s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 48s] installed software in a non-standard prefix.
[ 48s]
[ 48s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 48s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 48s] See the pkg-config man page for more details.
[ 48s] error: Bad exit status from /var/tmp/rpm-tmp.4KOTgc (%build)
[ 48s]
[ 48s]
[ 48s] RPM build errors:
[ 48s] Bad exit status from /var/tmp/rpm-tmp.4KOTgc (%build)
[ 48s] ### VM INTERACTION START ###
[ 55s] [ 37.367520] sysrq: SysRq : Power Off
[ 55s] [ 37.368056] reboot: Power down
[ 55s] ### VM INTERACTION END ###
[ 55s]
[ 55s] obs-arm-10 failed "build libosmo-abis.spec" at Sat Mar 26 00:49:25 UTC 2022.
[ 55s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Attention is currently required from: lynxis lazus.
laforge has posted comments on this change. ( https://gerrit.osmocom.org/c/libosmocore/+/23184 )
Change subject: gprs_ns2: add vty `nse <0-65535> restart sns`
......................................................................
Patch Set 3:
(1 comment)
File src/gb/gprs_ns2_vty.c:
https://gerrit.osmocom.org/c/libosmocore/+/23184/comment/a7b9d28d_649938d0
PS2, Line 2074: NS Entity ID (NSEI)\n
> Just to clarify, we're talking about the help message for the 'nse' part of the command's vector, no […]
Ack
--
To view, visit https://gerrit.osmocom.org/c/libosmocore/+/23184
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: libosmocore
Gerrit-Branch: master
Gerrit-Change-Id: Icb55d8449908d348ab10572eebcf971737fba00d
Gerrit-Change-Number: 23184
Gerrit-PatchSet: 3
Gerrit-Owner: lynxis lazus <lynxis(a)fe80.eu>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: daniel <dwillmann(a)sysmocom.de>
Gerrit-CC: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-CC: laforge <laforge(a)osmocom.org>
Gerrit-CC: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: lynxis lazus <lynxis(a)fe80.eu>
Gerrit-Comment-Date: Fri, 25 Mar 2022 17:14:19 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: No
Comment-In-Reply-To: fixeria <vyanitskiy(a)sysmocom.de>
Comment-In-Reply-To: lynxis lazus <lynxis(a)fe80.eu>
Gerrit-MessageType: comment
laforge has submitted this change. ( https://gerrit.osmocom.org/c/libosmocore/+/27572 )
Change subject: libosmocore.spec: Make libosmocore-devel require libsctp
......................................................................
libosmocore.spec: Make libosmocore-devel require libsctp
Now that the libosmo*.pc files 'Require' the libsctp pkg-config
file to be installed, we need an explicit package dependency
from libosmocore-devel to lksctp-tools-devel, the package providing
the related libsctp.pc file.
Change-Id: I967369f6726e88946872881d298ab90440ca2c0e
---
M contrib/libosmocore.spec.in
1 file changed, 1 insertion(+), 0 deletions(-)
Approvals:
Jenkins Builder: Verified
pespin: Looks good to me, approved
fixeria: Looks good to me, but someone else must approve
diff --git a/contrib/libosmocore.spec.in b/contrib/libosmocore.spec.in
index c2fe738..d699b58 100644
--- a/contrib/libosmocore.spec.in
+++ b/contrib/libosmocore.spec.in
@@ -129,6 +129,7 @@
Group: Development/Libraries/C and C++
Requires: libosmocore18 = %version
Requires: libtalloc-devel
+Requires: lksctp-tools-devel
%description -n libosmocore-devel
libosmocore is a library with various utility functions shared
--
To view, visit https://gerrit.osmocom.org/c/libosmocore/+/27572
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: libosmocore
Gerrit-Branch: master
Gerrit-Change-Id: I967369f6726e88946872881d298ab90440ca2c0e
Gerrit-Change-Number: 27572
Gerrit-PatchSet: 1
Gerrit-Owner: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: pespin <pespin(a)sysmocom.de>
Gerrit-MessageType: merged
Attention is currently required from: laforge, daniel, lynxis lazus.
fixeria has posted comments on this change. ( https://gerrit.osmocom.org/c/libosmocore/+/23184 )
Change subject: gprs_ns2: add vty `nse <0-65535> restart sns`
......................................................................
Patch Set 3:
(1 comment)
File src/gb/gprs_ns2_vty.c:
https://gerrit.osmocom.org/c/libosmocore/+/23184/comment/4135a609_3114171a
PS2, Line 2074: NS Entity ID (NSEI)\n
> it's working for both persistent as not persistent. I don't understand what you mean here.
Just to clarify, we're talking about the help message for the 'nse' part of the command's vector, not the '<0-65535>'. I checked what we have in cfg_ns_nsei_cmd, and there it is "Persistent NS Entity". If this command applies for both persistent as not persistent, then the help string should be "NSE specific commands" or something like that.
--
To view, visit https://gerrit.osmocom.org/c/libosmocore/+/23184
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: libosmocore
Gerrit-Branch: master
Gerrit-Change-Id: Icb55d8449908d348ab10572eebcf971737fba00d
Gerrit-Change-Number: 23184
Gerrit-PatchSet: 3
Gerrit-Owner: lynxis lazus <lynxis(a)fe80.eu>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: daniel <dwillmann(a)sysmocom.de>
Gerrit-CC: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-CC: laforge <laforge(a)osmocom.org>
Gerrit-CC: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: laforge <laforge(a)osmocom.org>
Gerrit-Attention: daniel <dwillmann(a)sysmocom.de>
Gerrit-Attention: lynxis lazus <lynxis(a)fe80.eu>
Gerrit-Comment-Date: Fri, 25 Mar 2022 14:40:36 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: No
Comment-In-Reply-To: fixeria <vyanitskiy(a)sysmocom.de>
Comment-In-Reply-To: lynxis lazus <lynxis(a)fe80.eu>
Gerrit-MessageType: comment
Attention is currently required from: laforge, fixeria, daniel.
Hello Jenkins Builder, daniel,
I'd like you to reexamine a change. Please visit
https://gerrit.osmocom.org/c/libosmocore/+/23184
to look at the new patch set (#3).
Change subject: gprs_ns2: add vty `nse <0-65535> restart sns`
......................................................................
gprs_ns2: add vty `nse <0-65535> restart sns`
Allow to restart SNS procedure and initiate a SNS-SIZE procedure with Reset.
SGSN side SNS restart will stop answer on ALIVE and is sending NS STATUS
invalid protocol state.
BSS side SNS restart will send a SNS Size procedure to reset the state.
Change-Id: Icb55d8449908d348ab10572eebcf971737fba00d
---
M src/gb/gprs_ns2_vty.c
1 file changed, 26 insertions(+), 0 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/libosmocore refs/changes/84/23184/3
--
To view, visit https://gerrit.osmocom.org/c/libosmocore/+/23184
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: libosmocore
Gerrit-Branch: master
Gerrit-Change-Id: Icb55d8449908d348ab10572eebcf971737fba00d
Gerrit-Change-Number: 23184
Gerrit-PatchSet: 3
Gerrit-Owner: lynxis lazus <lynxis(a)fe80.eu>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: daniel <dwillmann(a)sysmocom.de>
Gerrit-CC: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-CC: laforge <laforge(a)osmocom.org>
Gerrit-CC: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: laforge <laforge(a)osmocom.org>
Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Attention: daniel <dwillmann(a)sysmocom.de>
Gerrit-MessageType: newpatchset
Attention is currently required from: laforge, fixeria, daniel.
lynxis lazus has posted comments on this change. ( https://gerrit.osmocom.org/c/libosmocore/+/23184 )
Change subject: gprs_ns2: add vty `nse <0-65535> restart sns`
......................................................................
Patch Set 2:
(2 comments)
File src/gb/gprs_ns2_vty.c:
https://gerrit.osmocom.org/c/libosmocore/+/23184/comment/754332f0_48078885
PS2, Line 2073: restart sns
> I recommend concatenating these two words into 'restart-sns'.
Ack
https://gerrit.osmocom.org/c/libosmocore/+/23184/comment/e35fc6e5_ac120c4f
PS2, Line 2074: NS Entity ID (NSEI)\n
> "Persistent NS Entity", this is not the ID itself.
it's working for both persistent as not persistent. I don't understand what you mean here.
--
To view, visit https://gerrit.osmocom.org/c/libosmocore/+/23184
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: libosmocore
Gerrit-Branch: master
Gerrit-Change-Id: Icb55d8449908d348ab10572eebcf971737fba00d
Gerrit-Change-Number: 23184
Gerrit-PatchSet: 2
Gerrit-Owner: lynxis lazus <lynxis(a)fe80.eu>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: daniel <dwillmann(a)sysmocom.de>
Gerrit-CC: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-CC: laforge <laforge(a)osmocom.org>
Gerrit-CC: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: laforge <laforge(a)osmocom.org>
Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Attention: daniel <dwillmann(a)sysmocom.de>
Gerrit-Comment-Date: Fri, 25 Mar 2022 14:34:01 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: No
Comment-In-Reply-To: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-MessageType: comment
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o…
Package network:osmocom:nightly/osmo-trx failed to build in openSUSE_Leap_15.1_ARM/armv7l
Check out the package for editing:
osc checkout network:osmocom:nightly osmo-trx
Last lines of build log:
[ 172s] checking for byteswap.h... yes
[ 172s] checking for an ANSI C-conforming const... yes
[ 172s] checking for inline... inline
[ 173s] checking for size_t... yes
[ 174s] checking whether time.h and sys/time.h may both be included... yes
[ 174s] checking whether byte ordering is bigendian... no
[ 175s] checking for libosmocore >= 1.6.0... no
[ 175s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met:
[ 175s]
[ 175s] Package 'libsctp', required by 'libosmocore', not found
[ 175s]
[ 175s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 175s] installed software in a non-standard prefix.
[ 175s]
[ 175s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 175s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 175s] See the pkg-config man page for more details.
[ 175s] error: Bad exit status from /var/tmp/rpm-tmp.nQ1vPw (%build)
[ 175s]
[ 175s]
[ 175s] RPM build errors:
[ 175s] Bad exit status from /var/tmp/rpm-tmp.nQ1vPw (%build)
[ 175s] ### VM INTERACTION START ###
[ 175s] [ 141.505254] sysrq: SysRq : Power Off
[ 175s] [ 141.518702] reboot: Power down
[ 175s] ### VM INTERACTION END ###
[ 175s]
[ 175s] obs-arm-6 failed "build osmo-trx.spec" at Fri Mar 25 11:29:42 UTC 2022.
[ 175s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o…
Package network:osmocom:nightly/osmo-ggsn failed to build in openSUSE_Leap_15.1_ARM/armv7l
Check out the package for editing:
osc checkout network:osmocom:nightly osmo-ggsn
Last lines of build log:
[ 120s] checking for getopt_long... yes
[ 120s] checking whether build environment is sane... yes
[ 120s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
[ 120s] checking whether make sets $(MAKE)... yes
[ 120s] checking for style of include used by make... GNU
[ 120s] checking dependency style of gcc... none
[ 120s] checking for libosmocore >= 1.5.0... no
[ 120s] configure: error: Package requirements (libosmocore >= 1.5.0) were not met:
[ 120s]
[ 120s] Package 'libsctp', required by 'libosmocore', not found
[ 120s]
[ 120s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 120s] installed software in a non-standard prefix.
[ 120s]
[ 120s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 120s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 120s] See the pkg-config man page for more details.
[ 120s] error: Bad exit status from /var/tmp/rpm-tmp.M6Uoi0 (%build)
[ 120s]
[ 120s]
[ 120s] RPM build errors:
[ 120s] Bad exit status from /var/tmp/rpm-tmp.M6Uoi0 (%build)
[ 120s] ### VM INTERACTION START ###
[ 121s] [ 103.410595] sysrq: SysRq : Power Off
[ 121s] [ 103.412624] reboot: Power down
[ 121s] ### VM INTERACTION END ###
[ 121s]
[ 121s] armbuild01 failed "build osmo-ggsn.spec" at Fri Mar 25 11:23:37 UTC 2022.
[ 121s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o…
Package network:osmocom:nightly/osmo-sip-connector failed to build in openSUSE_Leap_15.1_ARM/armv7l
Check out the package for editing:
osc checkout network:osmocom:nightly osmo-sip-connector
Last lines of build log:
[ 111s] checking whether we are using the GNU C compiler... yes
[ 111s] checking whether gcc accepts -g... yes
[ 111s] checking for gcc option to accept ISO C89... none needed
[ 111s] checking whether gcc understands -c and -o together... yes
[ 111s] checking for style of include used by make... GNU
[ 111s] checking dependency style of gcc... none
[ 111s] checking for libosmocore >= 1.5.0... no
[ 111s] configure: error: Package requirements (libosmocore >= 1.5.0) were not met:
[ 111s]
[ 111s] Package 'libsctp', required by 'libosmocore', not found
[ 111s]
[ 111s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 111s] installed software in a non-standard prefix.
[ 111s]
[ 111s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 111s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 111s] See the pkg-config man page for more details.
[ 112s] error: Bad exit status from /var/tmp/rpm-tmp.5NkYUg (%build)
[ 112s]
[ 112s]
[ 112s] RPM build errors:
[ 112s] Bad exit status from /var/tmp/rpm-tmp.5NkYUg (%build)
[ 112s] ### VM INTERACTION START ###
[ 112s] [ 91.469558] sysrq: SysRq : Power Off
[ 112s] [ 91.503904] reboot: Power down
[ 112s] ### VM INTERACTION END ###
[ 112s]
[ 112s] armbuild02 failed "build osmo-sip-connector.spec" at Fri Mar 25 11:13:55 UTC 2022.
[ 112s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o…
Package network:osmocom:nightly/osmo-pcap failed to build in openSUSE_Leap_15.1_ARM/armv7l
Check out the package for editing:
osc checkout network:osmocom:nightly osmo-pcap
Last lines of build log:
[ 101s] checking how to run the C preprocessor... gcc -E
[ 101s] checking for grep that handles long lines and -e... /usr/bin/grep
[ 101s] checking for egrep... /usr/bin/grep -E
[ 102s] checking for ANSI C header files... yes
[ 102s] checking whether to enable VTY tests... no
[ 102s] checking for pcap-config... /usr/bin/pcap-config
[ 102s] checking for libosmocore >= 1.6.0... no
[ 102s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met:
[ 102s]
[ 102s] Package 'libsctp', required by 'libosmocore', not found
[ 102s]
[ 102s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 102s] installed software in a non-standard prefix.
[ 102s]
[ 102s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 102s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 102s] See the pkg-config man page for more details.
[ 102s] error: Bad exit status from /var/tmp/rpm-tmp.KbE62t (%build)
[ 102s]
[ 102s]
[ 102s] RPM build errors:
[ 102s] Bad exit status from /var/tmp/rpm-tmp.KbE62t (%build)
[ 102s] ### VM INTERACTION START ###
[ 102s] [ 79.882247] sysrq: SysRq : Power Off
[ 102s] [ 79.886009] reboot: Power down
[ 102s] ### VM INTERACTION END ###
[ 102s]
[ 102s] obs-arm-6 failed "build osmo-pcap.spec" at Fri Mar 25 11:09:31 UTC 2022.
[ 102s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o…
Package network:osmocom:nightly/osmo-trx failed to build in openSUSE_Leap_15.1_ARM/aarch64
Check out the package for editing:
osc checkout network:osmocom:nightly osmo-trx
Last lines of build log:
[ 48s] checking for byteswap.h... yes
[ 48s] checking for an ANSI C-conforming const... yes
[ 48s] checking for inline... inline
[ 48s] checking for size_t... yes
[ 48s] checking whether time.h and sys/time.h may both be included... yes
[ 48s] checking whether byte ordering is bigendian... no
[ 48s] checking for libosmocore >= 1.6.0... no
[ 48s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met:
[ 48s]
[ 48s] Package 'libsctp', required by 'libosmocore', not found
[ 48s]
[ 48s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 48s] installed software in a non-standard prefix.
[ 48s]
[ 48s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 48s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 48s] See the pkg-config man page for more details.
[ 48s] error: Bad exit status from /var/tmp/rpm-tmp.aUInkT (%build)
[ 48s]
[ 48s]
[ 48s] RPM build errors:
[ 48s] Bad exit status from /var/tmp/rpm-tmp.aUInkT (%build)
[ 48s] ### VM INTERACTION START ###
[ 51s] [ 36.879865] sysrq: SysRq : Power Off
[ 51s] [ 36.880456] reboot: Power down
[ 51s] ### VM INTERACTION END ###
[ 51s]
[ 51s] obs-arm-11 failed "build osmo-trx.spec" at Fri Mar 25 11:09:08 UTC 2022.
[ 51s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o…
Package network:osmocom:nightly/osmo-pcu failed to build in openSUSE_Leap_15.1_ARM/armv7l
Check out the package for editing:
osc checkout network:osmocom:nightly osmo-pcu
Last lines of build log:
[ 98s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so
[ 98s] checking how to hardcode library paths into programs... immediate
[ 98s] checking for pkg-config... /usr/bin/pkg-config
[ 98s] checking for armv7hl-suse-linux-gnueabi-pkg-config... /usr/bin/armv7hl-suse-linux-gnueabi-pkg-config
[ 98s] checking pkg-config is at least version 0.20... yes
[ 98s] checking for ANSI C header files... (cached) yes
[ 98s] checking for libosmocore >= 1.6.0... no
[ 98s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met:
[ 98s]
[ 98s] Package 'libsctp', required by 'libosmocore', not found
[ 98s]
[ 98s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 98s] installed software in a non-standard prefix.
[ 98s]
[ 98s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 98s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 98s] See the pkg-config man page for more details.
[ 98s] error: Bad exit status from /var/tmp/rpm-tmp.aSemHB (%build)
[ 98s]
[ 98s]
[ 98s] RPM build errors:
[ 98s] Bad exit status from /var/tmp/rpm-tmp.aSemHB (%build)
[ 98s] ### VM INTERACTION START ###
[ 98s] [ 79.046991] sysrq: SysRq : Power Off
[ 98s] [ 79.059173] reboot: Power down
[ 99s] ### VM INTERACTION END ###
[ 99s]
[ 99s] armbuild24 failed "build osmo-pcu.spec" at Fri Mar 25 11:07:01 UTC 2022.
[ 99s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o…
Package network:osmocom:nightly/osmo-ggsn failed to build in openSUSE_Leap_15.1_ARM/aarch64
Check out the package for editing:
osc checkout network:osmocom:nightly osmo-ggsn
Last lines of build log:
[ 69s] checking for getopt_long... yes
[ 69s] checking whether build environment is sane... yes
[ 69s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
[ 69s] checking whether make sets $(MAKE)... yes
[ 69s] checking for style of include used by make... GNU
[ 69s] checking dependency style of gcc... none
[ 69s] checking for libosmocore >= 1.5.0... no
[ 69s] configure: error: Package requirements (libosmocore >= 1.5.0) were not met:
[ 69s]
[ 69s] Package 'libsctp', required by 'libosmocore', not found
[ 69s]
[ 69s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 69s] installed software in a non-standard prefix.
[ 69s]
[ 69s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 69s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 69s] See the pkg-config man page for more details.
[ 69s] error: Bad exit status from /var/tmp/rpm-tmp.TyOHdj (%build)
[ 69s]
[ 69s]
[ 69s] RPM build errors:
[ 69s] Bad exit status from /var/tmp/rpm-tmp.TyOHdj (%build)
[ 69s] ### VM INTERACTION START ###
[ 70s] [ 60.566438] sysrq: SysRq : Power Off
[ 70s] [ 60.567936] reboot: Power down
[ 70s] ### VM INTERACTION END ###
[ 70s]
[ 70s] obs-arm-9 failed "build osmo-ggsn.spec" at Fri Mar 25 11:03:42 UTC 2022.
[ 70s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/l…
Package network:osmocom:nightly/libosmo-abis failed to build in openSUSE_Leap_15.1_ARM/armv7l
Check out the package for editing:
osc checkout network:osmocom:nightly libosmo-abis
Last lines of build log:
[ 102s] checking whether to build shared libraries... yes
[ 102s] checking whether to build static libraries... no
[ 102s] checking for pkg-config... /usr/bin/pkg-config
[ 102s] checking for armv7hl-suse-linux-gnueabi-pkg-config... /usr/bin/armv7hl-suse-linux-gnueabi-pkg-config
[ 102s] checking pkg-config is at least version 0.20... yes
[ 102s] checking if gcc supports -fvisibility=hidden... yes
[ 102s] checking for libosmocore >= 1.6.0... no
[ 102s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met:
[ 102s]
[ 102s] Package 'libsctp', required by 'libosmocore', not found
[ 102s]
[ 102s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 102s] installed software in a non-standard prefix.
[ 102s]
[ 102s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 102s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 102s] See the pkg-config man page for more details.
[ 102s] error: Bad exit status from /var/tmp/rpm-tmp.EVOvZX (%build)
[ 102s]
[ 102s]
[ 102s] RPM build errors:
[ 102s] Bad exit status from /var/tmp/rpm-tmp.EVOvZX (%build)
[ 102s] ### VM INTERACTION START ###
[ 102s] [ 82.788024] sysrq: SysRq : Power Off
[ 102s] [ 82.790645] reboot: Power down
[ 102s] ### VM INTERACTION END ###
[ 102s]
[ 102s] obs-arm-5 failed "build libosmo-abis.spec" at Fri Mar 25 11:01:53 UTC 2022.
[ 102s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o…
Package network:osmocom:nightly/osmo-sip-connector failed to build in openSUSE_Leap_15.1_ARM/aarch64
Check out the package for editing:
osc checkout network:osmocom:nightly osmo-sip-connector
Last lines of build log:
[ 54s] checking whether we are using the GNU C compiler... yes
[ 54s] checking whether gcc accepts -g... yes
[ 54s] checking for gcc option to accept ISO C89... none needed
[ 54s] checking whether gcc understands -c and -o together... yes
[ 54s] checking for style of include used by make... GNU
[ 54s] checking dependency style of gcc... none
[ 54s] checking for libosmocore >= 1.5.0... no
[ 54s] configure: error: Package requirements (libosmocore >= 1.5.0) were not met:
[ 54s]
[ 54s] Package 'libsctp', required by 'libosmocore', not found
[ 54s]
[ 54s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 54s] installed software in a non-standard prefix.
[ 54s]
[ 54s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 54s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 54s] See the pkg-config man page for more details.
[ 54s] error: Bad exit status from /var/tmp/rpm-tmp.CniKjl (%build)
[ 54s]
[ 54s]
[ 54s] RPM build errors:
[ 54s] Bad exit status from /var/tmp/rpm-tmp.CniKjl (%build)
[ 54s] ### VM INTERACTION START ###
[ 73s] [ 51.360947] sysrq: SysRq : Power Off
[ 73s] [ 51.361534] reboot: Power down
[ 73s] ### VM INTERACTION END ###
[ 73s]
[ 73s] obs-arm-10 failed "build osmo-sip-connector.spec" at Fri Mar 25 10:59:23 UTC 2022.
[ 73s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/s…
Package network:osmocom:nightly/simtrace2 failed to build in openSUSE_Leap_15.1_ARM/armv7l
Check out the package for editing:
osc checkout network:osmocom:nightly simtrace2
Last lines of build log:
[ 121s] checking whether to build shared libraries... yes
[ 121s] checking whether to build static libraries... no
[ 121s] checking for pkg-config... /usr/bin/pkg-config
[ 121s] checking for armv7hl-suse-linux-gnueabi-pkg-config... /usr/bin/armv7hl-suse-linux-gnueabi-pkg-config
[ 121s] checking pkg-config is at least version 0.20... yes
[ 121s] checking if gcc supports -fvisibility=hidden... yes
[ 121s] checking for libosmocore >= 1.4.0... no
[ 121s] configure: error: Package requirements (libosmocore >= 1.4.0) were not met:
[ 121s]
[ 121s] Package 'libsctp', required by 'libosmocore', not found
[ 121s]
[ 121s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 121s] installed software in a non-standard prefix.
[ 121s]
[ 121s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 121s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 121s] See the pkg-config man page for more details.
[ 121s] error: Bad exit status from /var/tmp/rpm-tmp.GWpNJe (%build)
[ 121s]
[ 121s]
[ 121s] RPM build errors:
[ 121s] Bad exit status from /var/tmp/rpm-tmp.GWpNJe (%build)
[ 122s] ### VM INTERACTION START ###
[ 122s] [ 104.140886] sysrq: SysRq : Power Off
[ 122s] [ 104.143714] reboot: Power down
[ 122s] ### VM INTERACTION END ###
[ 122s]
[ 122s] obs-arm-5 failed "build simtrace2.spec" at Fri Mar 25 10:57:47 UTC 2022.
[ 122s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Attention is currently required from: laforge, lynxis lazus.
osmith has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-ci/+/26393 )
Change subject: RFC: lint: annotate lines in gerrit
......................................................................
Patch Set 1:
(2 comments)
Commit Message:
https://gerrit.osmocom.org/c/osmo-ci/+/26393/comment/4984745d_651384f5
PS1, Line 13: The jenkins nodes needs to access the gerrit via ssh
> We could execute this script from the review job, save the json in the workspace and execute the upl […]
I don't think the complexity of the extra job is worth it (and to do it right, if we do allow untrusted input for the review json, it would be a good idea to do a sanity check on the json file too before passing it to the gerrit review command...).
Therefore I suggest to continue as follows:
* gerrit-lint.yml: replace " - shell: '{obj:cmd}'" with " - shell: '~/osmo-ci/lint/lint_diff.sh HEAD~1'", then remove the "cmd" variable in that file so it cannot be overridden
* create a gerrit user that has permission only to provide review
* configure jenkins to have permissions to that gerrit/ssh user
File lint/checkpatch/checkpatch_json.py:
https://gerrit.osmocom.org/c/osmo-ci/+/26393/comment/3cf12757_b0228386
PS1, Line 3: # from coreboot rev 9cae17d028d4bd3b278fc89ada8e06287917e213
I'd note the exact commit in the commit message, but not in the file. Otherwise we might update/change the file later on and forget to update the revision string here.
--
To view, visit https://gerrit.osmocom.org/c/osmo-ci/+/26393
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-ci
Gerrit-Branch: master
Gerrit-Change-Id: I1a48ddb976e0f53bfc0552d0be11e42ba68d9e49
Gerrit-Change-Number: 26393
Gerrit-PatchSet: 1
Gerrit-Owner: lynxis lazus <lynxis(a)fe80.eu>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: osmith <osmith(a)sysmocom.de>
Gerrit-Attention: laforge <laforge(a)osmocom.org>
Gerrit-Attention: lynxis lazus <lynxis(a)fe80.eu>
Gerrit-Comment-Date: Fri, 25 Mar 2022 10:56:47 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: No
Comment-In-Reply-To: osmith <osmith(a)sysmocom.de>
Comment-In-Reply-To: laforge <laforge(a)osmocom.org>
Comment-In-Reply-To: lynxis lazus <lynxis(a)fe80.eu>
Gerrit-MessageType: comment
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o…
Package network:osmocom:nightly/osmo-gbproxy failed to build in openSUSE_Leap_15.1_ARM/armv7l
Check out the package for editing:
osc checkout network:osmocom:nightly osmo-gbproxy
Last lines of build log:
[ 432s] checking whether to build static libraries... yes
[ 432s] checking for pkg-config... /usr/bin/pkg-config
[ 432s] checking for armv7hl-suse-linux-gnueabi-pkg-config... /usr/bin/armv7hl-suse-linux-gnueabi-pkg-config
[ 432s] checking pkg-config is at least version 0.20... yes
[ 434s] checking for library containing dlopen... -ldl
[ 436s] checking for library containing dlsym... -ldl
[ 436s] checking for libosmocore >= 1.6.0... no
[ 436s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met:
[ 436s]
[ 436s] Package 'libsctp', required by 'libosmocore', not found
[ 436s]
[ 436s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 436s] installed software in a non-standard prefix.
[ 436s]
[ 436s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 436s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 436s] See the pkg-config man page for more details.
[ 437s] error: Bad exit status from /var/tmp/rpm-tmp.u7SgEL (%build)
[ 437s]
[ 437s]
[ 437s] RPM build errors:
[ 437s] Bad exit status from /var/tmp/rpm-tmp.u7SgEL (%build)
[ 437s] ### VM INTERACTION START ###
[ 437s] [ 381.681645] sysrq: SysRq : Power Off
[ 437s] [ 381.693336] reboot: Power down
[ 438s] ### VM INTERACTION END ###
[ 438s]
[ 438s] armbuild21 failed "build osmo-gbproxy.spec" at Fri Mar 25 10:53:42 UTC 2022.
[ 438s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/s…
Package network:osmocom:nightly/simtrace2 failed to build in openSUSE_Leap_15.1_ARM/aarch64
Check out the package for editing:
osc checkout network:osmocom:nightly simtrace2
Last lines of build log:
[ 41s] checking whether to build shared libraries... yes
[ 41s] checking whether to build static libraries... no
[ 41s] checking for pkg-config... /usr/bin/pkg-config
[ 41s] checking for aarch64-suse-linux-gnu-pkg-config... /usr/bin/aarch64-suse-linux-gnu-pkg-config
[ 41s] checking pkg-config is at least version 0.20... yes
[ 41s] checking if gcc supports -fvisibility=hidden... yes
[ 41s] checking for libosmocore >= 1.4.0... no
[ 41s] configure: error: Package requirements (libosmocore >= 1.4.0) were not met:
[ 41s]
[ 41s] Package 'libsctp', required by 'libosmocore', not found
[ 41s]
[ 41s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 41s] installed software in a non-standard prefix.
[ 41s]
[ 41s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 41s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 41s] See the pkg-config man page for more details.
[ 41s] error: Bad exit status from /var/tmp/rpm-tmp.25pbj5 (%build)
[ 41s]
[ 41s]
[ 41s] RPM build errors:
[ 41s] Bad exit status from /var/tmp/rpm-tmp.25pbj5 (%build)
[ 41s] ### VM INTERACTION START ###
[ 41s] [ 30.204999] sysrq: SysRq : Power Off
[ 41s] [ 30.206090] reboot: Power down
[ 41s] ### VM INTERACTION END ###
[ 41s]
[ 41s] obs-arm-11 failed "build simtrace2.spec" at Fri Mar 25 10:52:12 UTC 2022.
[ 41s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o…
Package network:osmocom:nightly/osmo-pcap failed to build in openSUSE_Leap_15.1_ARM/aarch64
Check out the package for editing:
osc checkout network:osmocom:nightly osmo-pcap
Last lines of build log:
[ 61s] checking how to run the C preprocessor... gcc -E
[ 61s] checking for grep that handles long lines and -e... /usr/bin/grep
[ 61s] checking for egrep... /usr/bin/grep -E
[ 61s] checking for ANSI C header files... yes
[ 61s] checking whether to enable VTY tests... no
[ 61s] checking for pcap-config... /usr/bin/pcap-config
[ 61s] checking for libosmocore >= 1.6.0... no
[ 61s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met:
[ 61s]
[ 61s] Package 'libsctp', required by 'libosmocore', not found
[ 61s]
[ 61s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 61s] installed software in a non-standard prefix.
[ 61s]
[ 61s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 61s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 61s] See the pkg-config man page for more details.
[ 61s] error: Bad exit status from /var/tmp/rpm-tmp.UmzcEH (%build)
[ 61s]
[ 61s]
[ 61s] RPM build errors:
[ 61s] Bad exit status from /var/tmp/rpm-tmp.UmzcEH (%build)
[ 61s] ### VM INTERACTION START ###
[ 61s] [ 51.307241] sysrq: SysRq : Power Off
[ 61s] [ 51.309291] reboot: Power down
[ 61s] ### VM INTERACTION END ###
[ 61s]
[ 62s] obs-arm-9 failed "build osmo-pcap.spec" at Fri Mar 25 10:46:46 UTC 2022.
[ 62s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/l…
Package network:osmocom:nightly/libosmo-netif failed to build in openSUSE_Leap_15.1_ARM/armv7l
Check out the package for editing:
osc checkout network:osmocom:nightly libosmo-netif
Last lines of build log:
[ 108s] checking syslog.h presence... yes
[ 108s] checking for syslog.h... yes
[ 109s] checking ctype.h usability... yes
[ 109s] checking ctype.h presence... yes
[ 109s] checking for ctype.h... yes
[ 109s] checking if gcc supports -fvisibility=hidden... yes
[ 109s] checking for libosmocore >= 1.5.0... no
[ 109s] configure: error: Package requirements (libosmocore >= 1.5.0) were not met:
[ 109s]
[ 109s] Package 'libsctp', required by 'libosmocore', not found
[ 109s]
[ 109s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 109s] installed software in a non-standard prefix.
[ 109s]
[ 109s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 109s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 109s] See the pkg-config man page for more details.
[ 109s] error: Bad exit status from /var/tmp/rpm-tmp.GbAR7X (%build)
[ 109s]
[ 109s]
[ 109s] RPM build errors:
[ 109s] Bad exit status from /var/tmp/rpm-tmp.GbAR7X (%build)
[ 109s] ### VM INTERACTION START ###
[ 109s] [ 91.351206] sysrq: SysRq : Power Off
[ 109s] [ 91.385446] reboot: Power down
[ 109s] ### VM INTERACTION END ###
[ 109s]
[ 110s] obs-arm-5 failed "build libosmo-netif.spec" at Fri Mar 25 10:43:53 UTC 2022.
[ 110s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o…
Package network:osmocom:nightly/osmo-gbproxy failed to build in openSUSE_Leap_15.1_ARM/aarch64
Check out the package for editing:
osc checkout network:osmocom:nightly osmo-gbproxy
Last lines of build log:
[ 132s] checking whether to build static libraries... yes
[ 132s] checking for pkg-config... /usr/bin/pkg-config
[ 132s] checking for aarch64-suse-linux-gnu-pkg-config... /usr/bin/aarch64-suse-linux-gnu-pkg-config
[ 132s] checking pkg-config is at least version 0.20... yes
[ 133s] checking for library containing dlopen... -ldl
[ 133s] checking for library containing dlsym... -ldl
[ 133s] checking for libosmocore >= 1.6.0... no
[ 133s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met:
[ 133s]
[ 133s] Package 'libsctp', required by 'libosmocore', not found
[ 133s]
[ 133s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 133s] installed software in a non-standard prefix.
[ 133s]
[ 133s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 133s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 133s] See the pkg-config man page for more details.
[ 133s] error: Bad exit status from /var/tmp/rpm-tmp.Gj3zHH (%build)
[ 133s]
[ 133s]
[ 133s] RPM build errors:
[ 133s] Bad exit status from /var/tmp/rpm-tmp.Gj3zHH (%build)
[ 133s] ### VM INTERACTION START ###
[ 134s] [ 111.479663] sysrq: SysRq : Power Off
[ 134s] [ 111.494606] reboot: Power down
[ 134s] ### VM INTERACTION END ###
[ 134s]
[ 134s] obs-arm-3 failed "build osmo-gbproxy.spec" at Fri Mar 25 10:43:43 UTC 2022.
[ 134s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o…
Package network:osmocom:nightly/osmo-pcu failed to build in openSUSE_Leap_15.1_ARM/aarch64
Check out the package for editing:
osc checkout network:osmocom:nightly osmo-pcu
Last lines of build log:
[ 76s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so
[ 76s] checking how to hardcode library paths into programs... immediate
[ 76s] checking for pkg-config... /usr/bin/pkg-config
[ 76s] checking for aarch64-suse-linux-gnu-pkg-config... /usr/bin/aarch64-suse-linux-gnu-pkg-config
[ 76s] checking pkg-config is at least version 0.20... yes
[ 76s] checking for ANSI C header files... (cached) yes
[ 76s] checking for libosmocore >= 1.6.0... no
[ 76s] configure: error: Package requirements (libosmocore >= 1.6.0) were not met:
[ 76s]
[ 76s] Package 'libsctp', required by 'libosmocore', not found
[ 76s]
[ 76s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 76s] installed software in a non-standard prefix.
[ 76s]
[ 76s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 76s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 76s] See the pkg-config man page for more details.
[ 76s] error: Bad exit status from /var/tmp/rpm-tmp.AjMEx1 (%build)
[ 76s]
[ 76s]
[ 76s] RPM build errors:
[ 76s] Bad exit status from /var/tmp/rpm-tmp.AjMEx1 (%build)
[ 77s] ### VM INTERACTION START ###
[ 77s] [ 67.963389] sysrq: SysRq : Power Off
[ 77s] [ 67.965321] reboot: Power down
[ 77s] ### VM INTERACTION END ###
[ 77s]
[ 77s] obs-arm-9 failed "build osmo-pcu.spec" at Fri Mar 25 10:35:05 UTC 2022.
[ 77s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/l…
Package network:osmocom:nightly/libosmo-netif failed to build in openSUSE_Leap_15.1_ARM/aarch64
Check out the package for editing:
osc checkout network:osmocom:nightly libosmo-netif
Last lines of build log:
[ 139s] checking syslog.h presence... yes
[ 139s] checking for syslog.h... yes
[ 140s] checking ctype.h usability... yes
[ 140s] checking ctype.h presence... yes
[ 140s] checking for ctype.h... yes
[ 140s] checking if gcc supports -fvisibility=hidden... yes
[ 140s] checking for libosmocore >= 1.5.0... no
[ 140s] configure: error: Package requirements (libosmocore >= 1.5.0) were not met:
[ 140s]
[ 140s] Package 'libsctp', required by 'libosmocore', not found
[ 140s]
[ 140s] Consider adjusting the PKG_CONFIG_PATH environment variable if you
[ 140s] installed software in a non-standard prefix.
[ 140s]
[ 140s] Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS
[ 140s] and LIBOSMOCORE_LIBS to avoid the need to call pkg-config.
[ 140s] See the pkg-config man page for more details.
[ 140s] error: Bad exit status from /var/tmp/rpm-tmp.y7kZ61 (%build)
[ 140s]
[ 140s]
[ 140s] RPM build errors:
[ 140s] Bad exit status from /var/tmp/rpm-tmp.y7kZ61 (%build)
[ 140s] ### VM INTERACTION START ###
[ 140s] [ 117.215131] sysrq: SysRq : Power Off
[ 140s] [ 117.220279] reboot: Power down
[ 141s] ### VM INTERACTION END ###
[ 141s]
[ 141s] obs-arm-3 failed "build libosmo-netif.spec" at Fri Mar 25 10:32:22 UTC 2022.
[ 141s]
--
Configure notifications at https://build.opensuse.org/my/subscriptions
openSUSE Build Service (https://build.opensuse.org/)
Attention is currently required from: lynxis lazus.
fixeria has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/27569 )
Change subject: hlr: add imsi unknown cause test case
......................................................................
Patch Set 1:
(1 comment)
File hlr/HLR_Tests.ttcn:
https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/27569/comment/0f5af3f4_6618…
PS1, Line 987: TC_gsup_ul_unknown_imsi_roaming_not_allowed
Please add it to the 'control' section below and update the expected-results.xml. Thanks!
--
To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/27569
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-ttcn3-hacks
Gerrit-Branch: master
Gerrit-Change-Id: I87c3a2d7304b81cfc11a364d933567e1a080b99a
Gerrit-Change-Number: 27569
Gerrit-PatchSet: 1
Gerrit-Owner: lynxis lazus <lynxis(a)fe80.eu>
Gerrit-Reviewer: Jenkins Builder
Gerrit-CC: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Attention: lynxis lazus <lynxis(a)fe80.eu>
Gerrit-Comment-Date: Fri, 25 Mar 2022 10:31:18 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: No
Gerrit-MessageType: comment
laforge has uploaded this change for review. ( https://gerrit.osmocom.org/c/libosmocore/+/27572 )
Change subject: libosmocore.spec: Make libosmocore-devel require libsctp
......................................................................
libosmocore.spec: Make libosmocore-devel require libsctp
Now that the libosmo*.pc files 'Require' the libsctp pkg-config
file to be installed, we need an explicit package dependency
from libosmocore-devel to lksctp-tools-devel, the package providing
the related libsctp.pc file.
Change-Id: I967369f6726e88946872881d298ab90440ca2c0e
---
M contrib/libosmocore.spec.in
1 file changed, 1 insertion(+), 0 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/libosmocore refs/changes/72/27572/1
diff --git a/contrib/libosmocore.spec.in b/contrib/libosmocore.spec.in
index c2fe738..d699b58 100644
--- a/contrib/libosmocore.spec.in
+++ b/contrib/libosmocore.spec.in
@@ -129,6 +129,7 @@
Group: Development/Libraries/C and C++
Requires: libosmocore18 = %version
Requires: libtalloc-devel
+Requires: lksctp-tools-devel
%description -n libosmocore-devel
libosmocore is a library with various utility functions shared
--
To view, visit https://gerrit.osmocom.org/c/libosmocore/+/27572
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: libosmocore
Gerrit-Branch: master
Gerrit-Change-Id: I967369f6726e88946872881d298ab90440ca2c0e
Gerrit-Change-Number: 27572
Gerrit-PatchSet: 1
Gerrit-Owner: laforge <laforge(a)osmocom.org>
Gerrit-MessageType: newchange
Attention is currently required from: lynxis lazus.
fixeria has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/27569 )
Change subject: hlr: add imsi unknown cause test case
......................................................................
Patch Set 1:
(1 comment)
Patchset:
PS1:
> It would break all hlr latest test cases. […]
We do have 'mp_osmo_repo' which is set to 'nightly' by default.
--
To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/27569
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-ttcn3-hacks
Gerrit-Branch: master
Gerrit-Change-Id: I87c3a2d7304b81cfc11a364d933567e1a080b99a
Gerrit-Change-Number: 27569
Gerrit-PatchSet: 1
Gerrit-Owner: lynxis lazus <lynxis(a)fe80.eu>
Gerrit-Reviewer: Jenkins Builder
Gerrit-CC: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Attention: lynxis lazus <lynxis(a)fe80.eu>
Gerrit-Comment-Date: Fri, 25 Mar 2022 10:28:15 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: No
Comment-In-Reply-To: lynxis lazus <lynxis(a)fe80.eu>
Gerrit-MessageType: comment