Hello, We have completed first phase of performance test on EGPRS using iperf tool for short duration runs (1 to 3 hours). Steady throughput of 215 to 223 kbps in Downlink has been achieved under lab conditions over the air test using one Huawei E398 dongle as UE. PCU was configured for 4 PDTCH allocation. Osmo-pcu is based on master branch plus Radisys code changes which are currently under Gerrit review. The execution of test was done on NuRAN 1.0 hardware.
Below is a summary of test results Test type MCS DL Duration Throughput(kbps) Achieved Theoretical TCP MCS9 1hour 217 236.8 UDP MCS9 3hour 223 236.8
Regards Saurabh
Thanks for sharing the results.
What about MCS UL? Do you have some statistics which one has been used and if it has changed during the test? Same question regarding the throughput etc.
On 07/15/2016 04:25 PM, Saurabh Sharan wrote:
Hello, We have completed first phase of performance test on EGPRS using iperf tool for short duration runs (1 to 3 hours). Steady throughput of 215 to 223 kbps in Downlink has been achieved under lab conditions over the air test using one Huawei E398 dongle as UE. PCU was configured for 4 PDTCH allocation. Osmo-pcu is based on master branch plus Radisys code changes which are currently under Gerrit review. The execution of test was done on NuRAN 1.0 hardware.
Below is a summary of test results Test type MCS DL Duration Throughput(kbps) Achieved Theoretical TCP MCS9 1hour 217 236.8 UDP MCS9 3hour 223 236.8
Regards Saurabh
osmocom-net-gprs@lists.osmocom.org
-
Max -
Saurabh Sharan