Re: EDGE over osmo-pcu

Hi Jacob, Thanks for the information. Just wanted to test the new code, and I hit this problem: make[1]: Entering directory `/root/new_osmocom/osmo-pcu/src' CXX decoding.lo decoding.cpp:26:34: fatal error: osmocom/core/bitcomp.h: No such file or directory #include <osmocom/core/bitcomp.h> ^ compilation terminated. make[1]: *** [decoding.lo] Error 1 make[1]: Leaving directory `/root/new_osmocom/osmo-pcu/src' make: *** [all-recursive] Error 1 The libosmocore (master) is updated today, and the missing file is actually in /usr/local/include/osmocom/core/bitvec.h I tried both "jerlbeck/testing/pcu" and "jerlbeck/master" branches, the error is the same. Maybe I am missing something? Regards, Csaba ----- Eredeti üzenet ----- Feladó: "Jacob Erlbeck" &lt;jerlbeck(a)sysmocom.de&gt; Címzett: "Sipos Csaba" &lt;sipos.csaba(a)kvk.uni-obuda.hu&gt; Másolatot kap: osmocom-net-gprs(a)lists.osmocom.org, openbsc(a)lists.osmocom.org Elküldött üzenetek: Kedd, 2016. Február 9. 23:28:24 Tárgy: Re: EDGE over osmo-pcu Hi Sipos, On 05.02.2016 11:22, Jacob Erlbeck wrote: GPRS is fixed and jerlbeck/master is updated. Make sure to limit the MCS according to the HW/SW, so use the 'mcs max 4' command if the HW does not support 8PSK. Note that 8PSK is only supported for downlink yet, but the 'mcs max' command does not check this. So you should use 'mcs max 9 4' explicitely (this should be fixed by the additional commits (currently) in jerlbeck/testing/pcu, which adds that check and proper default values). Jacob -- - Jacob Erlbeck &lt;jerlbeck(a)sysmocom.de&gt; http://www.sysmocom.de/ ======================================================================= * sysmocom - systems for mobile communications GmbH * Alt-Moabit 93 * 10559 Berlin, Germany * Sitz / Registered office: Berlin, HRB 134158 B * Geschaeftsfuehrer / Managing Directors: Holger Freyther, Harald Welte