Hi all,
the Osmocom Conference 2017 last week was an overwhelming success. We
received lots of positive feedback from all sides. Thanks to all the
speakers, to the attendees as well as to the anonymous sponsor of the
travel grant funds.
It is my great pleasure that due to the great support by C3VOC (The CCC
Video Operation Center), we have full recordings of all talks given at
OsmoCon 2017.
You can find the videos on the C3VOC site at
https://media.ccc.de/search/?q=osmocon
They are also linked individually from the OsmoCon 2017 homepage at
https://osmocom.org/projects/osmo-dev-con/wiki/OsmoCon2017
I hope the video recordings will be of help for everyone who could not
make it to the event in person.
We will also be collecting the slides and put them up on the wiki during
the next few days.
Please don't hesitate to raise any feedback and/or questions.
Technical feedback/questions regarding Osmocom software / projects
should be addressed to the appropriate mailing lists, such as
openbsc(a)lists.osmocom.org.
Feedback to the organizers should be sent to osmocon2017(a)sysmocom.de.
Looking forward to the next OsmoCon, which we'll expect to be spanning
ore than just a single day.
Regards,
Harald
--
- Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)
Hi Harald and Andreas,
I’m writing to inquiry about the development roadmap of the kernel gtp module. For example, is there any plan to support the following features soon
- lightweight tunnel
- ipv6
The openair-cn project I’m working on is a user of the kernel gtp module. I’m happy to help improve the kernel gtp support, so it’s good to first ask about the roadmap.
Regards,
-Jiannan
Hi everyone,
We're using kernel GTP developed by Osmocom on openair-cn. Turns out that we
are not able to connect an UE for longer than 20 seconds using an ZTE eNB
apparently because the GTP-U is not answering to the echo requests. As far I
know this response is supposed to be implemented but it is not answering. Do
you guys have any tips on this issue?
Thanks in advance,
Alandre
