5 Apr
2013
5 Apr
'13
4:31 p.m.
Hey folks, I got my Pirelli DPL10 yesterday and was able to get hello world, rssi, layer1
etc up and working pretty easily. It's quite a bit easier than the other phones I was
trying to use with my RaspberryPi.
I was wondering if someone could give me a nudge on how to get started getting nuttx
working on this phone?
Also I'd like to ask if there are directions somewhere on how to save the standard
software presently on the phone so I can restore it later. I looked at osmoload but
didn't quite understand what to do. finfo seemed to come back with all zeros for
information and I confirmed that ping received a pong from the phone.
My goal is to work towards using osmocom/nuttx to make this phone my daily use phone.
Thanks,
Craig
5 Apr
5 Apr
7:24 p.m.
Hi Craig,
On 4/5/13, Craig Comstock <craig_comstock(a)yahoo.com> wrote:
I was wondering if someone could give me a nudge on how to get started
getting nuttx working on this phone?
I never tested it on Pirelli phone, but since it is same baseband as
GTA phones, you just need to use:
$ cd nuttx/tools
$ ./configure.sh compal_e88/nsh_highram
$ cd ..
$ make
Then upload nuttx.bin using chainload.compalram.bin as explained here:
http://bb.osmocom.org/trac/wiki/nuttx-bb/configurations
Keep in mind the main development platform for nuttx-bb is C155 (compal_e99).
If you need help, please enter in IRC channel ##nuttx-bb (irc.freenode.net).
More info:
http://bb.osmocom.org/trac/wiki/nuttx-bb
Best Regards,
Alan
6 Apr
6 Apr
5:38 a.m.
I followed the steps you mentioned Alan and when loading I do the following:
~/workspace/osmocom-bb/src/host/osmocon$ ./osmocon -p /dev/ttyUSB0 -m romload
../../target/firmware/board/compal_e88/chainload.compalram.bin -c nuttx.bin
got 2 bytes from modem, data looks like: 3e 69 >i
Received ident ack from phone, sending parameter sequence
read_file(../../target/firmware/board/compal_e88/chainload.compalram.bin): file_size=4378,
hdr_len=0, dnload_len=4381
Received parameter ack from phone, starting download
Finished, sent 5 blocks in total
Received branch ack, your code is running now!
Hit Ctrl-C and try minicom, no data or response to input in minicom. No change in screen
either.
The load happens very fast so I wonder if it is even really working?
I can load the standard osmocom apps fine.
-Craig
________________________________
From: Alan Carvalho de Assis <acassis(a)gmail.com>
To: Craig Comstock <craig_comstock(a)yahoo.com>
Cc: "baseband-devel(a)lists.osmocom.org" <baseband-devel(a)lists.osmocom.org>
Sent: Friday, April 5, 2013 12:24 PM
Subject: Re: Pirelli DPL10 - nuttx and dump flash for restore later
Hi Craig,
On 4/5/13, Craig Comstock <craig_comstock(a)yahoo.com> wrote:
I was wondering if someone could give me a nudge on how to get started
getting nuttx working on this phone?
I never tested it on Pirelli phone, but since it is same baseband as
GTA phones, you just need to use:
$ cd nuttx/tools
$ ./configure.sh compal_e88/nsh_highram
$ cd ..
$ make
Then upload nuttx.bin using chainload.compalram.bin as explained here:
http://bb.osmocom.org/trac/wiki/nuttx-bb/configurations
Keep in mind the main development platform for nuttx-bb is C155 (compal_e99).
If you need help, please enter in IRC channel ##nuttx-bb (irc.freenode.net).
More info:
http://bb.osmocom.org/trac/wiki/nuttx-bb
Best Regards,
Alan
10:04 a.m.
Hi,
On 06.04.2013 05:38, Craig Comstock wrote:
I followed the steps you mentioned Alan and when
loading I do the following:
~/workspace/osmocom-bb/src/host/osmocon$ ./osmocon -p /dev/ttyUSB0 -m
romload ../../target/firmware/board/compal_e88/chainload.compalram.bin
-c nuttx.bin
Well, chainload won't work for the Pirelli DP-L10 because it already
uses the romloader. This also means you need to load an image linked
for the highram-environment, not compalram.
Regards,
Steve
2 May
2 May
3:49 p.m.
I did get this working on the DPL10 by enabling IRDA console.
I did it two ways: copying nuttx/configs/compal_e88 to nuttx/configs/pirelli_dpl10 and
editing nsh_highram/defconfig and after reading more carefully just using compal_e88 and
editing
nuttx/.config
CONFIG_SERIAL_IRDA_CONSOLE=y
maybe I could submit a patch that made a new directory for pirelli_dpl10 that matches
compal_e88 but has IRDA console enabled?
now on to other things... like layer 1/2, graphics...
-Craig
________________________________
From: Alan Carvalho de Assis <acassis(a)gmail.com>
To: Craig Comstock <craig_comstock(a)yahoo.com>
Cc: "baseband-devel(a)lists.osmocom.org" <baseband-devel(a)lists.osmocom.org>
Sent: Friday, April 5, 2013 12:24 PM
Subject: Re: Pirelli DPL10 - nuttx and dump flash for restore later
Hi Craig,
On 4/5/13, Craig Comstock <craig_comstock(a)yahoo.com> wrote:
I was wondering if someone could give me a nudge on how to get started
getting nuttx working on this phone?
I never tested it on Pirelli phone, but since it is same baseband as
GTA phones, you just need to use:
$ cd nuttx/tools
$ ./configure.sh compal_e88/nsh_highram
$ cd ..
$ make
Then upload nuttx.bin using chainload.compalram.bin as explained here:
http://bb.osmocom.org/trac/wiki/nuttx-bb/configurations
Keep in mind the main development platform for nuttx-bb is C155 (compal_e99).
If you need help, please enter in IRC channel ##nuttx-bb (irc.freenode.net).
More info:
http://bb.osmocom.org/trac/wiki/nuttx-bb
Best Regards,
Alan
4:33 p.m.
Hi Craig,
Yes, creating a new board config to pirelli_dp10 is the right thing to do.
Patches are welcome!
Best Regards,
Alan
On 5/2/13, Craig Comstock <craig_comstock(a)yahoo.com> wrote:
I did get this working on the DPL10 by enabling IRDA
console.
I did it two ways: copying nuttx/configs/compal_e88 to
nuttx/configs/pirelli_dpl10 and editing nsh_highram/defconfig and after
reading more carefully just using compal_e88 and editing
nuttx/.config
CONFIG_SERIAL_IRDA_CONSOLE=y
maybe I could submit a patch that made a new directory for pirelli_dpl10
that matches compal_e88 but has IRDA console enabled?
now on to other things... like layer 1/2, graphics...
-Craig
________________________________
From: Alan Carvalho de Assis <acassis(a)gmail.com>
To: Craig Comstock <craig_comstock(a)yahoo.com>
Cc: "baseband-devel(a)lists.osmocom.org"
<baseband-devel(a)lists.osmocom.org>
Sent: Friday, April 5, 2013 12:24 PM
Subject: Re: Pirelli DPL10 - nuttx and dump flash for restore later
Hi Craig,
On 4/5/13, Craig Comstock <craig_comstock(a)yahoo.com> wrote:
I was wondering if someone could give me a nudge on how to get started
getting nuttx working on this phone?
I never tested it on Pirelli phone, but since it is same baseband as
GTA phones, you just need to use:
$ cd nuttx/tools
$ ./configure.sh compal_e88/nsh_highram
$ cd ..
$ make
Then upload nuttx.bin using chainload.compalram.bin as explained here:
http://bb.osmocom.org/trac/wiki/nuttx-bb/configurations
Keep in mind the main development platform for nuttx-bb is C155
(compal_e99).
If you need help, please enter in IRC channel ##nuttx-bb
(irc.freenode.net).
More info:
http://bb.osmocom.org/trac/wiki/nuttx-bb
Best Regards,
Alan
4028
days inactive
4055
days old
baseband-devel@lists.osmocom.org
5 comments
3 participants
participants (3)
-
Alan Carvalho de Assis -
Craig Comstock -
Steve Markgraf