2016. febr. 22. dátummal, 23:58 időpontban Mirko Kovacevic &lt;northmirko(a)gmail.com&gt; írta: Hi, Can we still use osmocomBB phones (C140,C139..) with Osmo-BTS project? I use transceiver program from jolly/testing branch and firmware in compal_86 ( trx.highram.bin ) from sylvian/testing branch, all from osmocomBB. It is the only way to get phones start sync on particular arfcn. If I write this configuration in osmo-bts.cfg: ! ! OsmoBTS () configuration saved from vty !! ! log stderr logging color 0 logging timestamp 0 logging level all everything logging level rsl info logging level oml info logging level rll notice logging level rr notice logging level meas notice logging level pag info logging level l1c info logging level l1p info logging level dsp debug logging level abis notice ! line vty no login ! phy 0 instance 0 bts 0 band 900 ipa unit-id 1801 0 oml remote-ip 127.0.0.1 trx 0 phy 0 instance 0 I can make launch osmo-bts-trx program. After launching osmo-nitb, Osmo-BTS is writing this log: <000b> trx_if.c:379 transceiver (phy0.0) rejected TRX command with response: 'RSP POWERON -22' <0001> bts.c:203 Shutting down BTS 0, Reason SIGINT and when shutdown timer is elapsed, Osmo-BTS exit writing this log: Shutdown timer expired. What should I put into osmo-bts.cfg and openbsc.cfg to make thing work ? I know that Calypso BTS support only one timeslot. Tried to modify openbsc.cfg to support only one TS, by putting: timeslot 0 phys_chan_config CCCH+SDCCH4 timeslot 1 phys_chan_config NONE timeslot 2 phys_chan_config NONE timeslot 3 phys_chan_config NONE timeslot 4 phys_chan_config NONE timeslot 5 phys_chan_config NONE timeslot 6 phys_chan_config NONE timeslot 7 phys_chan_config NONE But BSC is compling with this configuration. Thanks in advance -- Puno pozdrava, Mirko Kovačević