25 Feb
2013
25 Feb
'13
10:54 a.m.
Hi,
I'm having a try with your software. A small suggestion I can give you
is about the chapter "Starting OpenBTS" of your howto: a better way to
host the transceiver script is to create a new dir under the openbts
root (lets call it TransceiverOSMOCOM) that hosts your script. Then to
create a link in the apps dir that point to the new transceiver, to
follow the model openbts uses. This allows the user to switch between
many hardware pieces using the same openbts installation (if
compilation flags apply), avoiding to overwrite your script if openbts
compilation instructions are literally followed.
Just my 2 cents.
Dario.
On Sun, Feb 24, 2013 at 3:33 PM, Sylvain Munaut <246tnt(a)gmail.com> wrote:
PS: Any news
on the "emulated BTS" that has been presented at last years chaos communication
congress?
http://bb.osmocom.org/trac/wiki/Software/Transceiver
Cheers,
Sylvain
25 Feb
25 Feb
2:21 p.m.
I'm not succeeding in using the osmocom transceiver.
When openbts starts, the output shown is (a bunch of)
<0011> trx.c:190 TRX CLK Indication 1029029
<0011> trx.c:512 TRX Data 1029080:0:0:aac274073b9d407eb0bc014ed71e20
<0011> trx.c:512 TRX Data 1029081:0:0:61dbebb006fec0f9895e448fcafd10
<0011> trx.c:512 TRX Data 1029082:0:0:378d60f0c61b90eb0c9e1208114190
<0011> trx.c:512 TRX Data 1029083:0:0:a013ce5f9090c67e18229311431a30
When the osmocom mobile tries to attach, the output becomes
<0011> trx.c:512 TRX Data 1029491:0:0:a013ce5f9090c67e18229311431a30
<0012> l1ctl.c:351 Reset received: Starting sync.
<0011> trx.c:512 TRX Data 1029539:0:0:a14dd532a16dc062d07c030e055510
<0011> trx.c:512 TRX Data 1029540:0:0:82b7c400ae9e53e9bd7a0007bf5460
<0011> trx.c:512 TRX Data 1029541:0:0:842dd0834051146707753011978620
<0011> trx.c:512 TRX Data 1029542:0:0:9000ea751006a7f0380b57d421fe50
<0012> l1ctl.c:305 Sync failed, retrying ...
<0012> l1ctl.c:351 Reset received: Starting sync.
<0011> trx.c:512 TRX Data 1029590:0:0:aac274073b9d407eb0bc014ed71e20
<0011> trx.c:512 TRX Data 1029591:0:0:61dbebb006fec0f9895e448fcafd10
<0011> trx.c:512 TRX Data 1029592:0:0:378d60f0c61b90eb0c9e1208114190
<0011> trx.c:512 TRX Data 1029593:0:0:a013ce5f9090c67e18229311431a30
<0012> l1ctl.c:308 Sync acquired, wait for BCCH ...
<0012> l1ctl.c:351 Reset received: Starting sync.
<0012> l1ctl.c:308 Sync acquired, wait for BCCH ...
<0012> l1ctl.c:351 Reset received: Starting sync.
<0011> trx.c:512 TRX Data 1029641:0:0:8062948a52a104e0402112806004a0
<0011> trx.c:512 TRX Data 1029642:0:0:118a5288440000e102854a018a1600
<0011> trx.c:512 TRX Data 1029643:0:0:408904254000607400058000200220
<0011> trx.c:512 TRX Data 1029644:0:0:44a542052054286588022012a16200
<0012> l1ctl.c:308 Sync acquired, wait for BCCH ...
<0012> l1ctl.c:351 Reset received: Starting sync.
<0011> trx.c:512 TRX Data 1029692:0:0:aac274073b9d407eb0bc014ed71e20
<0011> trx.c:512 TRX Data 1029693:0:0:61dbebb006fec0f9895e448fcafd10
<0011> trx.c:512 TRX Data 1029694:0:0:378d60f0c61b90eb0c9e1208114190
<0011> trx.c:512 TRX Data 1029695:0:0:a013ce5f9090c67e18229311431a30
<0011> trx.c:512 TRX Data 1029743:0:0:a14dd532a16dc062d07c030e055510
<0011> trx.c:512 TRX Data 1029744:0:0:82b7c400ae9e53e9bd7a0007bf5460
<0011> trx.c:512 TRX Data 1029745:0:0:842dd0834051146707753011978620
<0011> trx.c:512 TRX Data 1029746:0:0:9000ea751006a7f0380b57d421fe50
<0012> l1ctl.c:308 Sync acquired, wait for BCCH ...
<0012> l1ctl.c:351 Reset received: Starting sync.
Until I get
ALERT 3063667520 TRXManager.cpp:93:clockHandler: TRX clock interface
timed out, assuming TRX is dead.
from openbts.
Output from osmocom mobile is
<0003> gsm322.c:2939 Channel synched on wrong ARFCN=XX, syncing on
right ARFCN again...
<0003> gsm322.c:474 Sync to ARFCN=0 rxlev=<=-110 (No sysinfo yet, ccch
mode NONE)
XX is the arfcn of the reference cell. Changing it doesn't change the
behavior. I've put this value as param for transceiver, according to
the instructions.
Any suggestion?
Thanks a lot.
Dario.
2:33 p.m.
That's obvious. I'm using 2 phones.
One as bts, other as subscriber.
On Mon, Feb 25, 2013 at 2:28 PM, Sylvain Munaut <246tnt(a)gmail.com> wrote:
When the
osmocom mobile tries to attach, the output becomes
WTF are you trying to do ?
You can't use the phone with both the 'transceiver' and the 'mobile'
application at the same time !
Cheers,
Sylvain
2:58 p.m.
This is what happens when using original motorola fw (logs from
openbts, cut where reported)
1361800521.515924 3073959680:
Starting the system...
transceiver: no process found
36
41
1
<0011> trx.c:419 TRX Control recv: |RXTUNE|897000|
<0011> trx.c:331 Setting C0 ARFCN to 35 (GSM900)
<0011> trx.c:220 TRX Control send: |RSP RXTUNE 0 897000|
<0011> trx.c:419 TRX Control recv: |TXTUNE|942000|
<0011> trx.c:220 TRX Control send: |RSP TXTUNE 0 942000|
<0011> trx.c:419 TRX Control recv: |SETBSIC|2|
<0011> trx.c:220 TRX Control send: |RSP SETBSIC 0|
<0011> trx.c:419 TRX Control recv: |SETMAXDLY|1|
<0011> trx.c:220 TRX Control send: |RSP SETMAXDLY 0 1|
<0011> trx.c:419 TRX Control recv: |SETRXGAIN|47|
<0011> trx.c:220 TRX Control send: |RSP SETRXGAIN 0 47|
<0011> trx.c:419 TRX Control recv: |POWERON||
<0011> trx.c:220 TRX Control send: |RSP POWERON 0|
<0011> trx.c:419 TRX Control recv: |SETPOWER|0|
<0011> trx.c:220 TRX Control send: |RSP SETPOWER 0 0|
<0011> trx.c:419 TRX Control recv: |SETSLOT|0 5|
<0011> trx.c:220 TRX Control send: |RSP SETSLOT 0 5|
<0011> trx.c:512 TRX Data 2348:0:0:abca74273bbd00fef0b5414bd71a00
[cut]
<0011> trx.c:512 TRX Data 2385:0:0:10aabdd500aefd7102ab75108bbd50
<0011> trx.c:419 TRX Control recv: |SETSLOT|1 1|
<0011> trx.c:220 TRX Control send: |RSP SETSLOT 0 1|
<0011> trx.c:419 TRX Control recv: |SETSLOT|2 1|
<0011> trx.c:220 TRX Control send: |RSP SETSLOT 0 1|
<0011> trx.c:419 TRX Control recv: |SETSLOT|3 1|
<0011> trx.c:220 TRX Control send: |RSP SETSLOT 0 1|
<0011> trx.c:419 TRX Control recv: |SETSLOT|4 1|
<0011> trx.c:220 TRX Control send: |RSP SETSLOT 0 1|
<0011> trx.c:419 TRX Control recv: |SETSLOT|5 1|
<0011> trx.c:220 TRX Control send: |RSP SETSLOT 0 1|
<0011> trx.c:419 TRX Control recv: |SETSLOT|6 1|
<0011> trx.c:220 TRX Control send: |RSP SETSLOT 0 1|
<0011> trx.c:419 TRX Control recv: |SETSLOT|7 1|
<0011> trx.c:220 TRX Control send: |RSP SETSLOT 0 1|
<0011> trx.c:419 TRX Control recv: |SETPOWER|10|
<0011> trx.c:220 TRX Control send: |RSP SETPOWER 0 10|
system ready
use the OpenBTSCLI utility to access CLI
<0011> trx.c:512 TRX Data 2388:0:0:4b90da4280e504e8e00d00a204d060
[cut]
<0011> trx.c:512 TRX Data 2861:0:0:4421420408540070a810001a212280
<0011> trx.c:419 TRX Control recv: |SETPOWER|9|
<0011> trx.c:220 TRX Control send: |RSP SETPOWER 0 9|
<0011> trx.c:512 TRX Data 2949:0:0:811aa402902001ea40084681028040
[cut]
<0011> trx.c:512 TRX Data 4136:0:0:44a542052054286588022012a16200
<0011> trx.c:419 TRX Control recv: |SETPOWER|8|
<0011> trx.c:220 TRX Control send: |RSP SETPOWER 0 8|
<0011> trx.c:512 TRX Data 4184:0:0:abca74273bbd00fef0b5414bd71a00
[cut]
<0011> trx.c:512 TRX Data 4544:0:0:44a542052054286588022012a16200
ALERT 3063667520 TRXManager.cpp:93:clockHandler: TRX clock interface
timed out, assuming TRX is dead.
<0011> trx.c:512 TRX Data 4592:0:0:abca74273bbd00fef0b5414bd71a00
<0011> trx.c:512 TRX Data 4593:0:0:6193ebb006fec0f1895b448faaec90
<0011> trx.c:512 TRX Data 4594:0:0:37af2071c41b986e0c9a5218b14110
<0011> trx.c:512 TRX Data 4595:0:0:a01acc5b9814c67a7832b353421a10
Aborted (core dumped)
On Mon, Feb 25, 2013 at 2:35 PM, Sylvain Munaut <246tnt(a)gmail.com> wrote:
That's
obvious.
I would think so, but from the logs, it really looks like the same
phone is trying to act as both.
Try not using 'mobile' at all and just use any plain old phone. (or
the phone with its original firmware).
Cheers,
Sylvain 
3:25 p.m.
New subject: Osmocom Transceiver
Assumption is the mother of all fuck.
On 25-2-2013 14:33, Dario Lombardo wrote:
That's obvious. I'm using 2 phones.
One as bts, other as subscriber.
On Mon, Feb 25, 2013 at 2:28 PM, Sylvain Munaut <246tnt(a)gmail.com> wrote:
>> When the osmocom mobile tries to attach, the output becomes
> WTF are you trying to do ?
>
> You can't use the phone with both the 'transceiver' and the
'mobile'
> application at the same time !
>
>
> Cheers,
>
> Sylvain
--
*Name: Nordin el Bouchtaoui* *Mail client: Thunderbird Mozilla
Opensource project* *web: http://www.linux.org*
3:28 p.m.
L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=36, flags=0x7)
Starting FCCH RecognitionFB0 (3164:6): TOA= 6672, Power= -83dBm, Angle= 644Hz
FB1 (3174:8): TOA= 9151, Power= -83dBm, Angle= 180Hz
fn_offset=3173 (fn=3174 + attempt=8 + ntdma = 7)
delay=9 (fn_offset=3173 + 11 - fn=3174 - 1
scheduling next FB/SB detection task with delay 9
=>FB @ FNR 3173 fn_offset=3173 qbits=1420
Synchronize_TDMA
LOST 2436!
SB2 (6353:2): TOA= 23, Power= -83dBm, Angle= 167Hz
=> SB 0x009ce14a: BSIC=18 fn=1956871(1475/ 7/ 1) qbits=0
Synchronize_TDMA
=>FB @ FNR 6351 fn_offset=1956870 qbits=4908
LOST 1903!
Apart from that, only battery indications are shown.
On Mon, Feb 25, 2013 at 3:03 PM, Sylvain Munaut <246tnt(a)gmail.com> wrote:
This is what
happens when using original motorola fw (logs from
openbts, cut where reported)
And the osmocon logs ?
Cheers,
Sylvain 
3:36 p.m.
Hi.
L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=36,
flags=0x7)
Starting FCCH RecognitionFB0 (3164:6): TOA= 6672, Power= -83dBm, Angle= 644Hz
FB1 (3174:8): TOA= 9151, Power= -83dBm, Angle= 180Hz
fn_offset=3173 (fn=3174 + attempt=8 + ntdma = 7)
delay=9 (fn_offset=3173 + 11 - fn=3174 - 1
scheduling next FB/SB detection task with delay 9
=>FB @ FNR 3173 fn_offset=3173 qbits=1420
Synchronize_TDMA
LOST 2436!
SB2 (6353:2): TOA= 23, Power= -83dBm, Angle= 167Hz
=> SB 0x009ce14a: BSIC=18 fn=1956871(1475/ 7/ 1) qbits=0
Synchronize_TDMA
=>FB @ FNR 6351 fn_offset=1956870 qbits=4908
LOST 1903!
Looks like it can't sync to the reference cell.
Cheers,
Sylvain
4:31 p.m.
I've changed the ref cell, and now I can see
BTS MODE: 2 35
in trx logs. I suppose something is working now, since I can see my
imsis in "tmsis" output from openbtscli.
I can't register to the network, but I think that now is something
related to the "core" (openbts/sipauthregister/asterisk), not radio.
One question more: is the osmocom transceiver able to handle sms as
other transceivers?
On Mon, Feb 25, 2013 at 3:36 PM, Sylvain Munaut <246tnt(a)gmail.com> wrote:
Hi.
L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=36,
flags=0x7)
Starting FCCH RecognitionFB0 (3164:6): TOA= 6672, Power= -83dBm, Angle= 644Hz
FB1 (3174:8): TOA= 9151, Power= -83dBm, Angle= 180Hz
fn_offset=3173 (fn=3174 + attempt=8 + ntdma = 7)
delay=9 (fn_offset=3173 + 11 - fn=3174 - 1
scheduling next FB/SB detection task with delay 9
=>FB @ FNR 3173 fn_offset=3173 qbits=1420
Synchronize_TDMA
LOST 2436!
SB2 (6353:2): TOA= 23, Power= -83dBm, Angle= 167Hz
=> SB 0x009ce14a: BSIC=18 fn=1956871(1475/ 7/ 1) qbits=0
Synchronize_TDMA
=>FB @ FNR 6351 fn_offset=1956870 qbits=4908
LOST 1903!
Looks like it can't sync to the reference cell.
Cheers,
Sylvain
4:34 p.m.
Hi,
I can't register to the network, but I think that
now is something
related to the "core" (openbts/sipauthregister/asterisk), not radio.
Yes, most likely.
One question more: is the osmocom transceiver able to
handle sms as
other transceivers?
Yes, it can handle SMS. But not calls.
Cheers,
Sylvain
4:57 p.m.
Do you think it would be possible to have one single transceiver that
drives 2 phones in order to have more TS?
On Mon, Feb 25, 2013 at 4:51 PM, Sylvain Munaut <246tnt(a)gmail.com> wrote:
Why not?
Because the current code only supports 1 bidirectional timeslot and
it's used for the beacon and control channels.
Is is something software-related, or hardware
limit?
Either ... Watch the talk, it's explained.
4101
days inactive
4101
days old
baseband-devel@lists.osmocom.org
15 comments
3 participants
participants (3)
-
Dario Lombardo -
nordin -
Sylvain Munaut