10 Mar
2010
10 Mar
'10
8:58 p.m.
hi,
after a break of one week, the firmware doesn't seem to be built.
when typing make clean followed by make or make firmware in ./src/
here is the tail of the output:
make -C target/firmware CROSS_COMPILE=arm-elf-
make[1]: Betrete Verzeichnis '<snip>/src/target/firmware'
make[1]: Für das Ziel »default« ist nichts zu tun.
make[1]: Verlasse Verzeichnis '<snip>/src/target/firmware'
what am i doing wrong?
10 Mar
10 Mar
9:43 p.m.
chekov wrote:
what am i doing wrong?
There really seems to be something wrong with master, on a fresh
checkout I get this:
mkdir shared/libosmocore/build-target
cd shared/libosmocore/build-target && ../configure \
--host=arm-elf-linux --disable-shared --disable-talloc --disable-tests \
CC="arm-elf-gcc" CFLAGS="-Os -ffunction-sections
-I../../../../target/firmware/include"
configure: WARNING: If you wanted to set the --build type, don't use --host.
If a cross compiler is detected then cross compile mode will be used.
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for arm-elf-linux-strip... no
checking for strip... strip
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make sets $(MAKE)... (cached) yes
checking for arm-elf-linux-gcc... arm-elf-gcc
checking whether the C compiler works... no
configure: error: in
`<snip>/devel/osmocom-bb/src/shared/libosmocore/build-target':
configure: error: C compiler cannot create executables
See `config.log' for more details.
make: *** [shared/libosmocore/build-target/Makefile] Fehler 77
Regards,
Steve
9:52 p.m.
it looks like it can't build some .o-files because of a missing
src/select.h
there is an select.h located at:
./shared/libosmocore/include/osmocore/select.h
but i don't know if they are the same.
Steve Markgraf wrote:
There really seems to be something wrong with master, on a fresh
checkout I get this:
mkdir shared/libosmocore/build-target
cd shared/libosmocore/build-target && ../configure \
--host=arm-elf-linux --disable-shared --disable-talloc
...
`<snip>/devel/osmocom-bb/src/shared/libosmocore/build-target':
configure: error: C compiler cannot create executables
See `config.log' for more details.
make: *** [shared/libosmocore/build-target/Makefile] Fehler 77
here are some lines from config.log:
| #include <execinfo.h>
configure:11502: result: no
configure:11530: checking for execinfo.h
configure:11539: result: no
configure:11424: checking sys/select.h usability
configure:11441: arm-elf-gcc -c -Os -ffunction-sections
-I../../../../target/firmware/include conftest.c >&5
conftest.c:53:24: error: sys/select.h: No such file or directory
configure:11448: $? = 1
configure: failed program was:
| /* confdefs.h. */
11 Mar
11 Mar
4:12 a.m.
On Wednesday 10 March 2010 21:52:35 chekov wrote:
it looks like it can't build some .o-files because
of a missing
src/select.h
there is an select.h located at:
./shared/libosmocore/include/osmocore/select.h
Not src/select.h, sys/select.h
If you take a look at the configure.in of libosmocore we check for two header
files being present. These are execinfo.h and sys/select.h. So this error boils
down to the toolchain you are using. E.g. I'm using a full blown ARM Linux
GNU/EABI toolchain with glibc headers in it and have a sys/select.h.
I would be happy to see a patch that adds an autoconf switch (e.g. --enable-
bare, --enable-minimal) and then only enable tests, talloc and these two
header checks if it is not enabled.
z.
5182
days inactive
5183
days old
baseband-devel@lists.osmocom.org
3 comments
3 participants
participants (3)
-
chekov -
Holger Freyther -
Steve Markgraf