On Wed, 23 Feb 2011 09:53:34 +0000 (GMT), MATTHEW EVANS wrote:
I am running some tests/experiments with the burst_ind branch. I want
to be able
to only follow the immediate assignments for my TMSI as it is
difficult to
verify that the bursts are indeed my traffic. However, I suspect this
is not
possible using only downlink traffic as without the channel request
from the MS
I cannot match the resulting IA? I would need to capture uplink too?
Even if you would capture the uplink on the RACH you would not be able
to
distinguish your phones request using your tmsi because IAs refer to
requests by
their Random Reference (04.08, 9.1.8). Only if you knew this reference
you could
follow only your phones DCHs. The first time a tmsi/imsi may be sent is
on an
already established DCH.
Of course you could still implement something that only if a RACH
request is
received on uplink the IA is followed, so you could be sure to follow
only
requests from phones in your vicinity.
Regards,
Mad