On Sat, Jun 23, 2012 at 11:14 AM, Akib Sayyed <akibsayyed(a)gmail.com> wrote:
i have been trying to load RSSI and run it. all went
well. but after all
of sudden LCD went off tried to debug but didnt understand much.
here is log
OSMOCOM Loader (revision osmocon_v0.0.0-1347-g4f0acac)
======================================================================
Running on compal_e88 in environment compalram
Found flash of 2097152 bytes at 0x0 with 2 regions
fb_td014_init: initializing LCD.
//after above msg LCD is going off and firmware is giving output correct
as it was giving before
then i created custom program kept only board_init(); then compiled and
uploaded in phone and started but still same issue.
then fetched fresh git and tried to compile then also same issue.
steps taken to compile test.c
created folder test in target/firmware/apps/
added test in make file application list
renamed test.c to main.c
steps taken to load code in c118
./host/osmocon/osmoload memload 0x820000
./target/firmware/board/compal_e86/test.highram.bin
should be like this :)
./host/osmocon/osmoload memload 0x820000
./target/firmware/board/compal_e88/test.highram.bin
./host/osmocon/osmoload jump 0x820000
please help me with that
--
Akib Sayyed
Matrix-Shell
akibsayyed(a)gmail.com
akibsayyed(a)matrixshell.com
Mob:- +91-966-514-2243
--
Akib Sayyed
Matrix-Shell
akibsayyed(a)gmail.com
akibsayyed(a)matrixshell.com
Mob:- +91-966-514-2243