$ ./kal -s GSM900 linux; GNU C++ version 4.6.3; Boost_104601; UHD_003.004.000-unknown
-- Opening a UmTRX device... -- Current recv frame size: 1472 bytes -- Current send frame size: 1472 bytes
UHD Warning: Unable to set the thread priority. Performance may be negatively affected. Please see the general application notes in the manual for instructions. EnvironmentError: OSError: error in pthread_setschedparam
UHD Warning: Unable to set the thread priority. Performance may be negatively affected. Please see the general application notes in the manual for instructions. EnvironmentError: OSError: error in pthread_setschedparam kal: Scanning for GSM-900 base stations. -- Loaded /home/gsmrlab/.uhd/cal/rx_iq_cal_v0.1_38.A.csv chan: 9 (936.8MHz - 613Hz) power: 6418.15 chan: 12 (937.4MHz - 620Hz) power: 12117.75 chan: 83 (951.6MHz - 643Hz) power: 6134.54 chan: 84 (951.8MHz - 650Hz) power: 6960.67 chan: 85 (952.0MHz - 637Hz) power: 6300.51 chan: 86 (952.2MHz - 689Hz) power: 6887.63 chan: 88 (952.6MHz - 638Hz) power: 8117.66 chan: 90 (953.0MHz - 675Hz) power: 8154.05 chan: 92 (953.4MHz - 607Hz) power: 19237.80 chan: 93 (953.6MHz - 644Hz) power: 5920.77 chan: 95 (954.0MHz - 599Hz) power: 6156.47 chan: 97 (954.4MHz - 653Hz) power: 6850.15 chan: 99 (954.8MHz - 621Hz) power: 9758.86 chan: 101 (955.2MHz - 611Hz) power: 14142.66 chan: 103 (955.6MHz - 612Hz) power: 8194.55 chan: 105 (956.0MHz - 622Hz) power: 6900.42 chan: 106 (956.2MHz - 605Hz) power: 5699.32 chan: 109 (956.8MHz - 618Hz) power: 6037.80 chan: 110 (957.0MHz - 609Hz) power: 5979.92 chan: 112 (957.4MHz - 621Hz) power: 6714.83 chan: 114 (957.8MHz - 616Hz) power: 7686.20 chan: 116 (958.2MHz - 628Hz) power: 8990.54 chan: 118 (958.6MHz - 627Hz) power: 6750.71 chan: 120 (959.0MHz - 607Hz) power: 6218.47 chan: 124 (959.8MHz - 642Hz) power: 6230.74
jiangwy
From: Alexander Chemeris Date: 2013-07-09 23:08 To: wyjiang CC: UmTRX Subject: Re: kalibrate-uhd is OK Does it show proper frequency offset? I suspect it might give wrong offsets due to different sampling frequency.
On Tue, Jul 9, 2013 at 12:39 PM, jiangwy wyjiang@ljshuoda.com wrote:
I have downloaded the source code from https://github.com/ttsou/kalibrate-uhd and built it. It can work.
By the way, my system is Ubuntu 12.04.
jiangwy
From: Alexander Chemeris Date: 2013-07-08 18:18 To: wyjiang CC: UmTRX Subject: Re: How to Get libusrp Jiang,
libusrp is only used for USRP1, for UmTRX you should use UHD instead of libusrp. A version of kal with the UHD support is available at Thomas Tsou's repository, but we have never tested it with UmTRX. Please let everyone know if you could get it working: https://github.com/ttsou/kalibrate-uhd
On Mon, Jul 8, 2013 at 2:05 PM, jiangwy wyjiang@ljshuoda.com wrote:
Hi All,
I want to build kal-v0.4.1. When use CXXFLAGS='-W -Wall -O3' ./configure Output errors:
configure: error: Package requirements (usrp >= 3.3) were not met:
No package 'usrp' found
I'm using ubuntu 12.04. How can I install libusrp? ' sudo apt-get install libusrp-dev' not working!
Jiang Wenyi
-- Regards, Alexander Chemeris. CEO, Fairwaves LLC / ООО УмРадио http://fairwaves.ru
-- Regards, Alexander Chemeris. CEO, Fairwaves LLC / ООО УмРадио http://fairwaves.ru