Re: Sendsms using cli

Rxgain is at 20. I have an external lna installed. Noise is at -23 and target is at -15 Sent from my Ipad On Mar 24, 2013, at 11:25 PM, Alexander Chemeris <alexander.chemeris(a)gmail.com> wrote: > Joel, > > It could be because of bad Rx settings. What are your 'rxgain' and MS > RSSI Target? > > On Sun, Mar 24, 2013 at 7:06 PM, Joel Yabut <joel.yabut(a)gmail.com> wrote: >> Sorry, its because our ettus are having no issues with this sms wherein we have this issue with the umtrx with the new build of open bts. >> >> Sent from my Ipad >> >> On Mar 24, 2013, at 2:23 PM, Alexander Chemeris <alexander.chemeris(a)gmail.com> wrote: >> >>> Joel, >>> >>> These questions are actually out of topic for this mailing list. I >>> recommend you to report this to the OpenBTS mailing list and attach >>> relevant logs. >>> >>> But my comments are below anyway: >>> >>> On Sun, Mar 24, 2013 at 12:14 AM, Joel Yabut <joel.yabut(a)gmail.com> wrote: >>>> Anyone having issues with sendsms using cli commands? I have been sending test 1 to 10 and i only received 5 out of 10. >>> >>> I haven't used this command extensively, but it shouldn't be much >>> different from sending an SMS through smqueue. >>> >>>> Also, it does not always send a welcome message to my phones when camping. >>> >>> It sends welcome message only to phones which a cell sees for the >>> first time, i.e. the ones which are not present at the TMSI table. Try >>> clearing TMSI table before your experiments. >>> >>> -- >>> Regards, >>> Alexander Chemeris. >>> CEO, Fairwaves LLC / ООО УмРадио >>> http://fairwaves.ru > > > > -- > Regards, > Alexander Chemeris. > CEO, Fairwaves LLC / ООО УмРадио > http://fairwaves.ru