19 Mar
2013
19 Mar
'13
10:39 a.m.
Hi Alexander,
I only changed the IP since I do not think changing the mask using the
following commands is supported:
./usrp_burn_mb_eeprom --args="addr=xxx.xxx.xxx.xxx" --key=*subnet *
--val=255.255.255.0
./usrp_burn_mb_eeprom --args="addr=xxx.xxx.xxx.xxx" --key=*gateway *
--val=xxx.xxx.xxx.xxx
I'm doing some more tracing soon.
Regards
Craig
On 19 March 2013 12:47, Alexander Chemeris <alexander.chemeris(a)gmail.com>wrote;wrote:
Craig,
On Mon, Mar 18, 2013 at 10:33 PM, Craig Reading
<craig.reading1(a)gmail.com> wrote:
Moved UmTRX on to 192.168.11.10 and get no ARP
reply. I'm probably being
dumb! Just wanted to make sure there is no issue with
subnet mask etc.
Have you changed subnet mask or IP address only?
Changing IP addresses on UmTRX works fine here. E.g. for the network
at CCC we ran all UmTRX's at 192.168.51.xx subnetwork. I've never
tried to change mask, though.
If you want to debug - here is the code which controls networking in
ZPU in UmTRX:
https://github.com/fairwaves/UHD-Fairwaves/blob/fairwaves/umtrx/firmware/zp…
--
Regards,
Alexander Chemeris.
CEO, Fairwaves LLC / ООО УмРадио
http://fairwaves.ru