24 Jul
2013
24 Jul
'13
12:44 a.m.
Hi Jiang Wenyi.
System clock of UmTRX is 26 MHz.
And the same for synchronizing clock I/O.
Thereafter system clock devided by 2 in each UnTRX to get 13 MHz
interleaved I/Q sample clock.
Best regards,
Andrey Sviyazov.
(Sent from mobile)
24.07.2013 4:42 пользователь "jiangwy" <wyjiang(a)ljshuoda.com> написал:
Andrey Sviyazov
If I connect X7 between master and slave, then the clock of master is
13MHz and the
clock of slave is 26MHz. Is that right?
Best regards,
Jiang Wenyi
From: Andrey Sviyazov
Date: 2013-07-23 22:59
To: wyjiang
CC: UmTRX
Subject: Re: How to syncronizing two UmTRXs
Hi Jiang Wenyi.
To synchronize clock of several UmTRX you have to leave one of them in
master
mode,
but all others must be switched to slave mode.
Master/slave control switch for 26MHz clock is S3(MHz).
I/O connector for 26 MHz clock is X7.
In case of master mode X7 becomes output and input in case of slave mode.
To set master mode turn switch S3 to the downward and to upward for the
slave
mode.
Please find text on the PCB board to be sure.
BTW, if you would like to use external clock source then all of UmTRX's
must be
in slave mode,
i.e. their clock connectors must be inputs.
Best regards,
Andrey Sviyazov.
2013/7/23 jiangwy <wyjiang(a)ljshuoda.com>
Hi All,
I have two UmTRXs v2. How to make the clock of them syncronized?
________________________________
Jiang Wenyi