This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Osmocom BTS-side code (Abis, scheduling, ...)".
The branch, master has been updated
via 8a89c7d3c327c3594c8dc6251179c0e66b1ba3e5 (commit)
via ab4696bb2fcdf16451585c40275d3b931ab1db4c (commit)
from 9605b695fab690682024128cd580b288906fbb24 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/osmo-bts/commit/?id=8a89c7d3c327c3594c8dc6251179c0e…
commit 8a89c7d3c327c3594c8dc6251179c0e66b1ba3e5
Author: Max <msuraev(a)sysmocom.de>
Date: Wed Sep 27 14:07:55 2017 +0200
vty: print version and description for each phy
When printing BTS via 'show bts ..' let's also print each TRX, which phy
number and version it uses and its description. It's helpful in
troubleshooting low-level issues as it allows vendor-specific code to
easily expose firmware version.
Related: SYS#3884
Change-Id: Iabcc862566b40a9314f3e1d17fda61d8ab24a3cd
http://cgit.osmocom.org/osmo-bts/commit/?id=ab4696bb2fcdf16451585c40275d3b9…
commit ab4696bb2fcdf16451585c40275d3b931ab1db4c
Author: Max <msuraev(a)sysmocom.de>
Date: Wed Sep 27 14:03:10 2017 +0200
Replace dead code
* remove leftover from copy-paste of corresponding OpenBSC code
* print OML link state
* print paging load
Change-Id: Ia5e3dc10efe2b5ab212cab1518a10d36b20b8bb2
-----------------------------------------------------------------------
Summary of changes:
src/common/vty.c | 33 ++++++++++++++++-----------------
1 file changed, 16 insertions(+), 17 deletions(-)
hooks/post-receive
--
Osmocom BTS-side code (Abis, scheduling, ...)
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "An utility library for Open Source Mobile Communications".
The branch, master has been updated
via b697df0c4a008b80aad750e42947363f899b9301 (commit)
from 505c965e3655b8ae94880a23baf8ecc2092163c4 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/libosmocore/commit/?id=b697df0c4a008b80aad750e42947…
commit b697df0c4a008b80aad750e42947363f899b9301
Author: Neels Hofmeyr <neels(a)hofmeyr.de>
Date: Thu Sep 28 19:41:50 2017 +0200
doxygen: adjust copyright to include 2017
Change-Id: If7c09a676f67da15454aedcda99d0e9b301c9945
-----------------------------------------------------------------------
Summary of changes:
src/application.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
hooks/post-receive
--
An utility library for Open Source Mobile Communications
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Osmocom layer for OpenEmbedded".
The branch, pespin/split-openbsc has been updated
discards e0f40635726b1fd611006b074a0e108b4d1d7733 (commit)
discards 27bc9fd793d6635bbcc4ab5c398a3b2951c67314 (commit)
discards 6a6542730d40d41c7337241d9e3f68c7924c4d22 (commit)
discards 264a1b396d2bb4020045228ba1c79826c93c9ae6 (commit)
discards febb1f0fd7fefb7a159c5a85c82b06fc94aa2530 (commit)
discards 628d50e5e1d4e934c6f5b47c54e15e805fe664da (commit)
discards 2c127a2e205945032411242d14a6361d2904de21 (commit)
discards 26391fbf5d9b3c1f2d76585262dfa61c35d9798f (commit)
discards 24d98f08d85788284e9b25f632293e1db4d28b63 (commit)
discards feda3e5115e7a290f541f5b95f9bd6864ffe2589 (commit)
discards f3b8764e6675f907592578c97f30a519af736d13 (commit)
discards 257099e16e34b960dd53dbe97a0fc0224b641051 (commit)
discards b493a3aba9a29213e7ad12b165cc40439b8d5810 (commit)
discards b8cbe5307d9312e50749050408efb51e78cf1b17 (commit)
discards 4c655d4d53ffbfc78846239aedb5cce51278e006 (commit)
via 587f6acfa07e7dd3dcfbf003f6356f3a55ce41dc (commit)
via 8fdfcbde932b2248baed73b2c19c9f9045b56d31 (commit)
via b401a8e9cff00873fe36b25c148c1be8fe680396 (commit)
via 9f948048c9110db276bccff99bd8bdf13dfaae9e (commit)
via 8eb42575096f6227e83228e3d8fbf591f9cedb22 (commit)
via 8554d8a42c0e2ed7f0e39ba76cd3aee78dde6f30 (commit)
via b4eb971657d68322d11064e45012d2b4adf29e93 (commit)
via 254389b473e392d97adfa666c25f1b565d2d3059 (commit)
via df34ca271120e4f3390d3fe7b53b6c5b7763b217 (commit)
via 13141964e696f0bbffb61b04fd0e2c924136366a (commit)
via 73eade5890d3d11752679e1dffb91bd910464c3e (commit)
via d7e9e0e836f0fd45e55243bad19449a396c3cb04 (commit)
via 947868cafd1b0a661a2cc29848dacab3e02807f7 (commit)
via 5baaf5e976c9a28d0a5449586189e985c2e17165 (commit)
via d20285c2efe7b8ab1997c73ab9e4cb654d785f1f (commit)
via d978990ab05d1eea20049cc40e99394f45d2cefa (commit)
This update added new revisions after undoing existing revisions. That is
to say, the old revision is not a strict subset of the new revision. This
situation occurs when you --force push a change and generate a repository
containing something like this:
* -- * -- B -- O -- O -- O (e0f40635726b1fd611006b074a0e108b4d1d7733)
\
N -- N -- N (587f6acfa07e7dd3dcfbf003f6356f3a55ce41dc)
When this happens we assume that you've already had alert emails for all
of the O revisions, and so we here report only the revisions in the N
branch from the common base, B.
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/meta-telephony/commit/?id=587f6acfa07e7dd3dcfbf003f…
commit 587f6acfa07e7dd3dcfbf003f6356f3a55ce41dc
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Fri Sep 29 13:43:18 2017 +0200
Fix typo with DESCRIPTION var in several recipes
Change-Id: I2637afdb1c868a1f9b54dcbbe55b1a1ee7519d14
http://cgit.osmocom.org/meta-telephony/commit/?id=8fdfcbde932b2248baed73b2c…
commit 8fdfcbde932b2248baed73b2c19c9f9045b56d31
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 18:19:27 2017 +0200
osmo-msc: Avoid installed duplicated binaries in osmo-bsc
Those two binaries are currently being installed by osmo-bsc too:
- /usr/bin/osmo-meas-udp2db
- /usr/bin/meas_json
Change-Id: Ic582450f1881373785f12714ffa3bd150d37417e
http://cgit.osmocom.org/meta-telephony/commit/?id=b401a8e9cff00873fe36b25c1…
commit b401a8e9cff00873fe36b25c148c1be8fe680396
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 15:17:26 2017 +0200
openbsc: Drop packages present in other recipes after split
The osmo-bsc one is renamed to osmo-bsc-sccplite and kept because the
code in the new osmo-bsc repository still doesn't support SCCPLite, this
this one can still be used by installing the osmo-bsc-sccplite package.
Change-Id: Ifd029cbd36417ee980bff51b4112705be16175d3
http://cgit.osmocom.org/meta-telephony/commit/?id=9f948048c9110db276bccff99…
commit 9f948048c9110db276bccff99bd8bdf13dfaae9e
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 14:30:51 2017 +0200
osmo-bsc: Introduce recipe
This recipe provides osmo-bsc package from new osmo-bsc.git repository,
and replaces old osmo-bsc from openbc.git.
Change-Id: I06c529c01a72e16aa20a2c7a20e8b043718edab3
http://cgit.osmocom.org/meta-telephony/commit/?id=8eb42575096f6227e83228e3d…
commit 8eb42575096f6227e83228e3d8fbf591f9cedb22
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 14:30:33 2017 +0200
osmo-msc: Introduce recipe
Change-Id: I68715d1970fde83fd6647344b82c6a859404ef9e
http://cgit.osmocom.org/meta-telephony/commit/?id=8554d8a42c0e2ed7f0e39ba76…
commit 8554d8a42c0e2ed7f0e39ba76cd3aee78dde6f30
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 14:29:24 2017 +0200
osmo-hlr: Introduce recipe
Change-Id: Ie7f47dca8d7e5e50792104ae0c7cb557391542f7
http://cgit.osmocom.org/meta-telephony/commit/?id=b4eb971657d68322d11064e45…
commit b4eb971657d68322d11064e45012d2b4adf29e93
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 14:28:49 2017 +0200
osmo-mgw: Introduce recipe
Change-Id: If9c2d6b5dd8dfd8a0b462d87e93e0733e57f7b0a
http://cgit.osmocom.org/meta-telephony/commit/?id=254389b473e392d97adfa666c…
commit 254389b473e392d97adfa666c25f1b565d2d3059
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 14:30:16 2017 +0200
osmo-sgsn: Introduce recipe
Change-Id: Ia7e35660598bfd87917728c521c1fba827e98d68
http://cgit.osmocom.org/meta-telephony/commit/?id=df34ca271120e4f3390d3fe7b…
commit df34ca271120e4f3390d3fe7b53b6c5b7763b217
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 14:27:13 2017 +0200
osmo-iuh: Introduce recipe
Change-Id: I33d6dccad2336b83f4b4e89769b0796d1c87ed94
http://cgit.osmocom.org/meta-telephony/commit/?id=13141964e696f0bbffb61b04f…
commit 13141964e696f0bbffb61b04fd0e2c924136366a
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 14:26:12 2017 +0200
libasn1c: Introduce recipe
Change-Id: I50d990b06c56c3bfa71e7268694702300c0c9a26
http://cgit.osmocom.org/meta-telephony/commit/?id=73eade5890d3d11752679e1df…
commit 73eade5890d3d11752679e1dffb91bd910464c3e
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Mon Sep 25 17:46:29 2017 +0200
Drop openggsn and introduce osmo-ggsn
Take the opportunity to enable systemd service instead of sysvint like other osmocom
services already do.
Change-Id: Ie6018ef78ff18f2e6809fee957c9d645e35c7c9a
http://cgit.osmocom.org/meta-telephony/commit/?id=d7e9e0e836f0fd45e55243bad…
commit d7e9e0e836f0fd45e55243bad19449a396c3cb04
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Wed Sep 27 12:17:43 2017 +0200
libosmo-sccp: Install cfg and service file for osmo-stp
Patch with systemd service file is added while waiting to have it merged
in upstream.
Change-Id: Id82a12bbfb72b421c75140072048a963fb50f684
http://cgit.osmocom.org/meta-telephony/commit/?id=947868cafd1b0a661a2cc2984…
commit 947868cafd1b0a661a2cc29848dacab3e02807f7
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Wed Sep 6 12:09:52 2017 +0200
libosmo-abis: modify PV to match recent release
The upstream release commit is 7f17b8c45d094941292036143f3292a1d5789cf5.
This should fix current issue with 201705/nightly package feed:
$ opkg upgrade
Not selecting libosmo-abis 0.3.2+gitr0+d3292913ac as installing it would break existing dependencies.
$ opkg list_installed | grep libosmo-abis
libosmo-abis - 0.3.2+gitr2+d3292913ac-r2.18.1.0
See that gitr in repos is 0 while the previously installed one has
gitr2, which is higher. Explanations I can find for this:
- PR server was somehow reset?
- the value in gitr is calculated based on offset from latest tag. As
new release introduced new tag, gitr may have been reset.
In any case, updating PV to have the correct value should fix this
issue.
Change-Id: I9f27661d9e5241efe7725b7d1efcf4aef55e2efe
http://cgit.osmocom.org/meta-telephony/commit/?id=5baaf5e976c9a28d0a5449586…
commit 5baaf5e976c9a28d0a5449586189e985c2e17165
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Thu Aug 17 00:53:51 2017 +0200
update PV versions for libosmocore, libosmo-sccp and openggsn
As we're building git master, we need to make sure PV is not lagging
behind. I wish there was some OE magic by which it could discover
PV from the source it builds.
Change-Id: Ib45238e95156f215412d51d975b1acb33633a3e1
http://cgit.osmocom.org/meta-telephony/commit/?id=d20285c2efe7b8ab1997c73ab…
commit d20285c2efe7b8ab1997c73ab9e4cb654d785f1f
Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com>
Date: Fri Jun 2 18:33:02 2017 +0800
libosmo-sccp: Attempt to fix link issue on 201705-nightly builds
This project will build some static libraries needed for testing
and also for downstream users. Do not disable the static build on
newer Poky versions.
arm-poky-linux-gnueabi-libtool: link: arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/home/jenkinsdebian8amd64/jenkins/workspace/201705-nightly/label/Debian8-AMD64/build/tmp/work/armv5te-poky-linux-gnueabi/libosmo-sccp/git-r1.18.1/recipe-sysroot -Wall -I/home/jenkinsdebian8amd64/jenkins/workspace/201705-nightly/label/Debian8-AMD64/build/tmp/work/armv5te-poky-linux-gnueabi/libosmo-sccp/git-r1.18.1/recipe-sysroot/usr/include/ -I/home/jenkinsdebian8amd64/jenkins/workspace/201705-nightly/label/Debian8-AMD64/build/tmp/work/armv5te-poky-linux-gnueabi/libosmo-sccp/git-r1.18.1/recipe-sysroot/usr/include/ -O2 -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/jenkinsdebian8amd64/jenkins/workspace/201705-nightly/label/Debian8-AMD64/build/tmp/work/armv5te-poky-linux-gnueabi/libosmo-sccp/git-r1.18.1=/usr/src/debug/libosmo-sccp/git-r1.18.1 -fdebug-prefix-map=/home/jenkinsdebian8amd64/jenkins/workspace/201705-nightly/label/Debian8-AMD64/build/tmp/work/armv5te-poky-linux-gnueabi/libosmo-sccp/git-r1.18.1/recipe-sysroot-native= -fdebug-prefix-map=/home/jenkinsdebian8amd64/jenkins/workspace/201705-nightly/label/Debian8-AMD64/build/tmp/work/armv5te-poky-linux-gnueabi/libosmo-sccp/git-r1.18.1/recipe-sysroot= -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -o xua_test xua_test.o sccp_test_data.o ../../src/.libs/libosmo-sigtran.so -losmogsm -ltalloc -losmovty -losmocore -losmonetif -lsctp
| xua_test.o: In function `test_helpers':
| /usr/src/debug/libosmo-sccp/git-r1.18.1/git/tests/xua/xua_test.c:160: undefined reference to `xua_part_add_gt'
| /usr/src/debug/libosmo-sccp/git-r1.18.1/git/tests/xua/xua_test.c:168: undefined reference to `sua_parse_gt'
| xua_test.o: In function `test_sccp2sua_case':
Change-Id: I80eea9ac888ab4b13614ff475bebacb94b72b0f2
http://cgit.osmocom.org/meta-telephony/commit/?id=d978990ab05d1eea20049cc40…
commit d978990ab05d1eea20049cc40e99394f45d2cefa
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Mon Sep 25 17:22:56 2017 +0200
Update osmocom versions to point to current master
New versions are required in order to build new git repositories which
will deprecate osmo-nitb soon.
Change-Id: If36b86a6a542af7381d9a07da51a330f2e44a96f
-----------------------------------------------------------------------
Summary of changes:
recipes-isdn/dahdi-linux/dahdi-linux_2.10.2.bb | 2 +-
recipes-isdn/dahdi-tools/dahdi-tools_2.10.2.bb | 2 +-
recipes-isdn/lcr/lcr_git.bb | 2 +-
recipes-isdn/misdn/misdn-utils_git.bb | 2 +-
recipes-osmocom/libasn1c/libasn1c.inc | 2 +-
recipes-osmocom/libosmo-abis/libosmo-abis.inc | 2 +-
recipes-osmocom/libosmo-netif/libosmo-netif.inc | 2 +-
recipes-osmocom/libosmo-sccp/libosmo-sccp.inc | 4 +-
recipes-osmocom/libosmocore/libosmocore.inc | 2 +-
recipes-osmocom/libosmocore/libosmocore_git.bb | 2 +-
recipes-osmocom/openbsc/openbsc.inc | 2 -
recipes-osmocom/openbsc/openbsc/osmo-bsc_mgcp.init | 48 ----------------------
recipes-osmocom/openbsc/openbsc/osmo-sgsn.init | 48 ----------------------
recipes-osmocom/osmo-bsc/osmo-bsc.inc | 4 +-
recipes-osmocom/osmo-ggsn/files/osmo-ggsn.init | 2 +-
recipes-osmocom/osmo-ggsn/osmo-ggsn_git.bb | 3 +-
recipes-osmocom/osmo-hlr/osmo-hlr.inc | 8 ++--
recipes-osmocom/osmo-iuh/osmo-iuh.inc | 4 +-
recipes-osmocom/osmo-mgw/osmo-mgw.inc | 4 +-
recipes-osmocom/osmo-msc/osmo-msc.inc | 4 +-
recipes-osmocom/osmo-sgsn/osmo-sgsn.inc | 4 +-
21 files changed, 27 insertions(+), 126 deletions(-)
delete mode 100755 recipes-osmocom/openbsc/openbsc/osmo-bsc_mgcp.init
delete mode 100755 recipes-osmocom/openbsc/openbsc/osmo-sgsn.init
hooks/post-receive
--
Osmocom layer for OpenEmbedded
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "UNNAMED PROJECT".
The branch, master has been updated
via f88c914efd4ef75bd861a669c943cfb82a8be789 (commit)
via f95ce04cbda6caeedfc4d3d006313afff767f1af (commit)
from 05c8b465ab2fe13edb67c95210a9b475f91ebeb3 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/osmo-hlr/commit/?id=f88c914efd4ef75bd861a669c943cfb…
commit f88c914efd4ef75bd861a669c943cfb82a8be789
Author: Neels Hofmeyr <neels(a)hofmeyr.de>
Date: Mon Sep 25 23:23:57 2017 +0200
add CTRL tests for enable-/disable-/status-ps
Change-Id: I014437db9c0f15d818e04810f6cb14bf475ee002
http://cgit.osmocom.org/osmo-hlr/commit/?id=f95ce04cbda6caeedfc4d3d006313af…
commit f95ce04cbda6caeedfc4d3d006313afff767f1af
Author: Neels Hofmeyr <neels(a)hofmeyr.de>
Date: Mon Sep 25 23:22:02 2017 +0200
add basic CTRL interface tests
Prepare for adding tests of enable-/disable-/status-ps CTRL commands.
Change-Id: Ie195169c574716b514da7e04a3ce9727ef70a55e
-----------------------------------------------------------------------
Summary of changes:
configure.ac | 15 ++
contrib/ipa.py | 278 ++++++++++++++++++++++++++
contrib/jenkins.sh | 2 +-
tests/Makefile.am | 10 +
tests/ctrl_test_runner.py | 241 ++++++++++++++++++++++
sql/hlr_data.sql => tests/test_subscriber.sql | 0
6 files changed, 545 insertions(+), 1 deletion(-)
create mode 100755 contrib/ipa.py
create mode 100644 tests/ctrl_test_runner.py
copy sql/hlr_data.sql => tests/test_subscriber.sql (100%)
hooks/post-receive
--
UNNAMED PROJECT
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Manuals for Osmocom GSM components".
The branch, neels/osmo-hlr has been updated
discards 9103efacfb2489e25bc823457ab71b3bc37103b4 (commit)
via ce31f284b4f71a921affe96128fdd0f1278c8d73 (commit)
This update added new revisions after undoing existing revisions. That is
to say, the old revision is not a strict subset of the new revision. This
situation occurs when you --force push a change and generate a repository
containing something like this:
* -- * -- B -- O -- O -- O (9103efacfb2489e25bc823457ab71b3bc37103b4)
\
N -- N -- N (ce31f284b4f71a921affe96128fdd0f1278c8d73)
When this happens we assume that you've already had alert emails for all
of the O revisions, and so we here report only the revisions in the N
branch from the common base, B.
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/osmo-gsm-manuals/commit/?id=ce31f284b4f71a921affe96…
commit ce31f284b4f71a921affe96128fdd0f1278c8d73
Author: Neels Hofmeyr <neels(a)hofmeyr.de>
Date: Mon Sep 25 16:37:34 2017 +0200
add OsmoHLR manual
Change-Id: Ieb6a362a26a7e65199f68f5cd32d9b6b0e5d0fbf
-----------------------------------------------------------------------
Summary of changes:
OsmoHLR/chapters/subscribers.adoc | 61 +++++++++++++++++++++++++++++++++++++++
1 file changed, 61 insertions(+)
create mode 100644 OsmoHLR/chapters/subscribers.adoc
hooks/post-receive
--
Manuals for Osmocom GSM components
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Manuals for Osmocom GSM components".
The branch, neels/osmo-hlr has been updated
discards f8643f57f0e39230ad59b32a48b5987927e67100 (commit)
discards d823797ae53da9fc810f13c93ffb9db1a797c904 (commit)
via 9103efacfb2489e25bc823457ab71b3bc37103b4 (commit)
via cc18f38233a4e247cfe50a85e091e053414fb272 (commit)
via cb7585381120193c7550b830e20643cc2413dc2a (commit)
via 086ce34fbd00d65cdaa3b5069694a9d0f5244293 (commit)
via 6e55bc1361c92391a4dbaba4147c90b657c8877f (commit)
via 40abc7a217d3d9a1e72ff0e8802cb246333f0442 (commit)
This update added new revisions after undoing existing revisions. That is
to say, the old revision is not a strict subset of the new revision. This
situation occurs when you --force push a change and generate a repository
containing something like this:
* -- * -- B -- O -- O -- O (f8643f57f0e39230ad59b32a48b5987927e67100)
\
N -- N -- N (9103efacfb2489e25bc823457ab71b3bc37103b4)
When this happens we assume that you've already had alert emails for all
of the O revisions, and so we here report only the revisions in the N
branch from the common base, B.
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/osmo-gsm-manuals/commit/?id=9103efacfb2489e25bc8234…
commit 9103efacfb2489e25bc823457ab71b3bc37103b4
Author: Neels Hofmeyr <neels(a)hofmeyr.de>
Date: Mon Sep 25 16:37:34 2017 +0200
add OsmoHLR manual
Change-Id: Ieb6a362a26a7e65199f68f5cd32d9b6b0e5d0fbf
http://cgit.osmocom.org/osmo-gsm-manuals/commit/?id=cc18f38233a4e247cfe50a8…
commit cc18f38233a4e247cfe50a85e091e053414fb272
Author: Neels Hofmeyr <neels(a)hofmeyr.de>
Date: Thu Sep 28 18:28:29 2017 +0200
mncc: not 'TCHF', rather 'TCH'
Change-Id: I0edf1763122f182c66ad4c7155ddd4bea0c1d608
http://cgit.osmocom.org/osmo-gsm-manuals/commit/?id=cb7585381120193c7550b83…
commit cb7585381120193c7550b830e20643cc2413dc2a
Author: Neels Hofmeyr <neels(a)hofmeyr.de>
Date: Mon Sep 18 16:19:30 2017 +0200
add OsmoMSC manual
Add OsmoMSC and OsmoHLR to bibliography (even though the OsmoHLR manual does
not yet exist, a reference to it has been added in OsmoMSC's manual).
Change-Id: I9ecff2837fbf5fdc19675a726f6d70c21eb178ee
http://cgit.osmocom.org/osmo-gsm-manuals/commit/?id=086ce34fbd00d65cdaa3b50…
commit 086ce34fbd00d65cdaa3b5069694a9d0f5244293
Author: Neels Hofmeyr <neels(a)hofmeyr.de>
Date: Thu Sep 28 17:04:26 2017 +0200
move smpp.adoc to common chapters
It will soon be referenced by OsmoMSC as well.
Change-Id: I15febdea6569316dad3eed5f9dc7158adb5b078c
http://cgit.osmocom.org/osmo-gsm-manuals/commit/?id=6e55bc1361c92391a4dbaba…
commit 6e55bc1361c92391a4dbaba4147c90b657c8877f
Author: Neels Hofmeyr <neels(a)hofmeyr.de>
Date: Thu Sep 28 17:51:45 2017 +0200
mncc.adoc: clarify MNCC_BRIDGE, with future outlook
Change-Id: Ic71a83d71f2da87e1066fcc060b2b942643eddbc
http://cgit.osmocom.org/osmo-gsm-manuals/commit/?id=40abc7a217d3d9a1e72ff0e…
commit 40abc7a217d3d9a1e72ff0e8802cb246333f0442
Author: Neels Hofmeyr <neels(a)hofmeyr.de>
Date: Thu Sep 28 17:18:39 2017 +0200
tweak common/mncc.adoc: use variable for program name
Change-Id: I993a3c3bf617b9823f49898364b5f728a4549330
-----------------------------------------------------------------------
Summary of changes:
OsmoMSC/osmomsc-usermanual.adoc | 3 +-
OsmoNITB/osmonitb-usermanual.adoc | 3 +-
common/chapters/mncc.adoc | 83 ++++++++++++++++++---------------
{OsmoNITB => common}/chapters/smpp.adoc | 11 +++--
4 files changed, 57 insertions(+), 43 deletions(-)
rename {OsmoNITB => common}/chapters/smpp.adoc (92%)
hooks/post-receive
--
Manuals for Osmocom GSM components
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Osmocom layer for OpenEmbedded".
The branch, pespin/split-openbsc has been updated
discards df3f8b9ff5d03e766724acb7ac9c599521d0f633 (commit)
discards 51595539583edde7efbc87287b3b198c44a30c0e (commit)
discards 07eb51c235a27bf18899b46a39ae8e35c39318fd (commit)
discards fcc9318ea36c5be8568e65d78ad6b9cbe7588ea4 (commit)
discards d0dd5b442336d7132f2e7422eb05af16576000c6 (commit)
discards a69f611921cc56c508bbf87a1efe27a5451b873c (commit)
discards e5c0ebaf2a2ef757f0ca7088fac48377603361d3 (commit)
discards 5ee7d9ade99af6388b6a40d08b60a5aad7c8d7cd (commit)
discards 49508dda5bd5d2d86922a9def542f8682007219e (commit)
discards bf1a781a172da14c38970579730023c1c8945657 (commit)
via e0f40635726b1fd611006b074a0e108b4d1d7733 (commit)
via 27bc9fd793d6635bbcc4ab5c398a3b2951c67314 (commit)
via 6a6542730d40d41c7337241d9e3f68c7924c4d22 (commit)
via 264a1b396d2bb4020045228ba1c79826c93c9ae6 (commit)
via febb1f0fd7fefb7a159c5a85c82b06fc94aa2530 (commit)
via 628d50e5e1d4e934c6f5b47c54e15e805fe664da (commit)
via 2c127a2e205945032411242d14a6361d2904de21 (commit)
via 26391fbf5d9b3c1f2d76585262dfa61c35d9798f (commit)
via 24d98f08d85788284e9b25f632293e1db4d28b63 (commit)
via feda3e5115e7a290f541f5b95f9bd6864ffe2589 (commit)
This update added new revisions after undoing existing revisions. That is
to say, the old revision is not a strict subset of the new revision. This
situation occurs when you --force push a change and generate a repository
containing something like this:
* -- * -- B -- O -- O -- O (df3f8b9ff5d03e766724acb7ac9c599521d0f633)
\
N -- N -- N (e0f40635726b1fd611006b074a0e108b4d1d7733)
When this happens we assume that you've already had alert emails for all
of the O revisions, and so we here report only the revisions in the N
branch from the common base, B.
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/meta-telephony/commit/?id=e0f40635726b1fd611006b074…
commit e0f40635726b1fd611006b074a0e108b4d1d7733
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 18:19:27 2017 +0200
osmo-msc: Avoid installed duplicated binaries in osmo-bsc
Those two binaries are currently being installed by osmo-bsc too.
Change-Id: Ic582450f1881373785f12714ffa3bd150d37417e
http://cgit.osmocom.org/meta-telephony/commit/?id=27bc9fd793d6635bbcc4ab5c3…
commit 27bc9fd793d6635bbcc4ab5c398a3b2951c67314
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 15:17:26 2017 +0200
openbsc: Drop packages present in other recipes after split
The osmo-bsc one is renamed to osmo-bsc-sccplite and kept because the
code in the new osmo-bsc repository still doesn't support SCCPLite, this
this one can still be used by installing the osmo-bsc-sccplite package.
Change-Id: Ifd029cbd36417ee980bff51b4112705be16175d3
http://cgit.osmocom.org/meta-telephony/commit/?id=6a6542730d40d41c7337241d9…
commit 6a6542730d40d41c7337241d9e3f68c7924c4d22
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 14:30:51 2017 +0200
osmo-bsc: Introduce recipe
Change-Id: I06c529c01a72e16aa20a2c7a20e8b043718edab3
http://cgit.osmocom.org/meta-telephony/commit/?id=264a1b396d2bb4020045228ba…
commit 264a1b396d2bb4020045228ba1c79826c93c9ae6
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 14:30:33 2017 +0200
osmo-msc: Introduce recipe
Change-Id: I68715d1970fde83fd6647344b82c6a859404ef9e
http://cgit.osmocom.org/meta-telephony/commit/?id=febb1f0fd7fefb7a159c5a85c…
commit febb1f0fd7fefb7a159c5a85c82b06fc94aa2530
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 14:29:24 2017 +0200
osmo-hlr: Introduce recipe
Change-Id: Ie7f47dca8d7e5e50792104ae0c7cb557391542f7
http://cgit.osmocom.org/meta-telephony/commit/?id=628d50e5e1d4e934c6f5b47c5…
commit 628d50e5e1d4e934c6f5b47c54e15e805fe664da
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 14:28:49 2017 +0200
osmo-mgw: Introduce recipe
Change-Id: If9c2d6b5dd8dfd8a0b462d87e93e0733e57f7b0a
http://cgit.osmocom.org/meta-telephony/commit/?id=2c127a2e205945032411242d1…
commit 2c127a2e205945032411242d14a6361d2904de21
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 14:30:16 2017 +0200
osmo-sgsn: Introduce recipe
Change-Id: Ia7e35660598bfd87917728c521c1fba827e98d68
http://cgit.osmocom.org/meta-telephony/commit/?id=26391fbf5d9b3c1f2d7658526…
commit 26391fbf5d9b3c1f2d76585262dfa61c35d9798f
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 14:27:13 2017 +0200
osmo-iuh: Introduce recipe
Change-Id: I33d6dccad2336b83f4b4e89769b0796d1c87ed94
http://cgit.osmocom.org/meta-telephony/commit/?id=24d98f08d85788284e9b25f63…
commit 24d98f08d85788284e9b25f632293e1db4d28b63
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 14:26:12 2017 +0200
libasn1c: Introduce recipe
Change-Id: I50d990b06c56c3bfa71e7268694702300c0c9a26
http://cgit.osmocom.org/meta-telephony/commit/?id=feda3e5115e7a290f541f5b95…
commit feda3e5115e7a290f541f5b95f9bd6864ffe2589
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Mon Sep 25 17:46:29 2017 +0200
Drop openggsn and introduce osmo-ggsn
Take the opportunity to enable systemd service instead of sysvint like other osmocom
services already do.
Change-Id: Ie6018ef78ff18f2e6809fee957c9d645e35c7c9a
-----------------------------------------------------------------------
Summary of changes:
recipes-osmocom/osmo-ggsn/osmo-ggsn_git.bb | 2 +-
recipes-osmocom/osmo-hlr/osmo-hlr.inc | 8 +++++++-
recipes-osmocom/osmo-msc/osmo-msc.inc | 3 ++-
3 files changed, 10 insertions(+), 3 deletions(-)
hooks/post-receive
--
Osmocom layer for OpenEmbedded
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "The OpenGGSN project".
The branch, master has been updated
via b5624c3d4838cd774c3a6df4208b709890174a25 (commit)
from 6a21527a2d417eca602cd0af3461dfa285da8767 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/osmo-ggsn/commit/?id=b5624c3d4838cd774c3a6df4208b70…
commit b5624c3d4838cd774c3a6df4208b709890174a25
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Wed Sep 27 20:56:16 2017 +0200
contrib: osmo-ggsn.service: Use expected suffix for cfg file
files in doc/examples/ dir end with .cfg, as well as all configuration
files present in all projects.
Change-Id: I361c67809d095dd08b0f400de2a6f84f981411c5
-----------------------------------------------------------------------
Summary of changes:
contrib/osmo-ggsn.service | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
hooks/post-receive
--
The OpenGGSN project
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "CI scripts".
The branch, master has been updated
via 6c401be0957e47f58789bfbd9397813410f5fa4f (commit)
from b258f0cfc897d66e8d46478a6d6920a527f969b5 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/osmo-ci/commit/?id=6c401be0957e47f58789bfbd93978134…
commit 6c401be0957e47f58789bfbd9397813410f5fa4f
Author: André Boddenberg <dr.blobb(a)gmail.com>
Date: Tue Sep 12 13:16:33 2017 +0200
Gerrit verification jobs as Jenkins Job Builder YAML [1] file.
All jobs are in jobs/ directory and will be automatically verified and
deployed in a follow-up commit.
Note: osmocom-nightly-nitb-split.yml has been moved to jobs/ dir.
[1] https://docs.openstack.org/infra/jenkins-job-builder/
Change-Id: I04387367a6e2d737bfb50423c81a8908d3c2a89f
-----------------------------------------------------------------------
Summary of changes:
README.adoc | 3 +
jobs/README.adoc | 31 +++
jobs/gerrit-verifications.yml | 253 +++++++++++++++++++++++
{scripts => jobs}/osmocom-nightly-nitb-split.yml | 0
4 files changed, 287 insertions(+)
create mode 100644 jobs/README.adoc
create mode 100644 jobs/gerrit-verifications.yml
rename {scripts => jobs}/osmocom-nightly-nitb-split.yml (100%)
hooks/post-receive
--
CI scripts
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Manuals for Osmocom GSM components".
The branch, master has been updated
via f56996aa41812372e5bdc34c0a23f6d71fa4dcc4 (commit)
from 271f5b408186e7deba1f84fca926aab7b6447b6b (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
-----------------------------------------------------------------------
Summary of changes:
OsmoNITB/osmonitb-usermanual.adoc | 2 +-
{OsmoNITB => common}/chapters/mncc.adoc | 93 ++++++++++++++++++---------------
2 files changed, 51 insertions(+), 44 deletions(-)
rename {OsmoNITB => common}/chapters/mncc.adoc (66%)
hooks/post-receive
--
Manuals for Osmocom GSM components
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Osmocom layer for OpenEmbedded".
The branch, pespin/split-openbsc has been updated
discards 382f5f92853c202cc32a99851cdc0d2e6f6094c3 (commit)
discards 5bef635b74ad73946b9ba0b3930b066ae2c4fb71 (commit)
discards 084da7d655768430d1d4923911c89800e57c0ca6 (commit)
discards 679bdfda76246ce82a3af17805aa9344202df33e (commit)
discards c8663b330ebd3243cd6fb17c6f043cc96e0bd51c (commit)
discards 1d75baca7ba27b0a0c68d805a5c540ce6ed8e2e6 (commit)
discards 77570e6fbd49502fda650aa54c930dd6c3f6b4fe (commit)
discards b0a620dc0cc7a168e10d2772e19f17b5441ba9a3 (commit)
discards 82aec056f1e5055ba4738975b1b8fd1da4c3f9dd (commit)
discards 445b721cde4d69bc318f1da23f8d7a565e39b989 (commit)
discards e09581abd3df02ff725822c9882c6fa34f7c0bdf (commit)
discards b73837c2795392d3d4e80151d38f339989a84c47 (commit)
discards d532dfd72455db26ccd7d5143fd919049fc1621d (commit)
discards 666a4acad84fef2a3f29f733ac232e7dcf828525 (commit)
discards 9c92ec64f95d48e365a840ce829ef3a318270735 (commit)
via df3f8b9ff5d03e766724acb7ac9c599521d0f633 (commit)
via 51595539583edde7efbc87287b3b198c44a30c0e (commit)
via 07eb51c235a27bf18899b46a39ae8e35c39318fd (commit)
via fcc9318ea36c5be8568e65d78ad6b9cbe7588ea4 (commit)
via d0dd5b442336d7132f2e7422eb05af16576000c6 (commit)
via a69f611921cc56c508bbf87a1efe27a5451b873c (commit)
via e5c0ebaf2a2ef757f0ca7088fac48377603361d3 (commit)
via 5ee7d9ade99af6388b6a40d08b60a5aad7c8d7cd (commit)
via 49508dda5bd5d2d86922a9def542f8682007219e (commit)
via bf1a781a172da14c38970579730023c1c8945657 (commit)
via f3b8764e6675f907592578c97f30a519af736d13 (commit)
via 257099e16e34b960dd53dbe97a0fc0224b641051 (commit)
via b493a3aba9a29213e7ad12b165cc40439b8d5810 (commit)
via b8cbe5307d9312e50749050408efb51e78cf1b17 (commit)
via 4c655d4d53ffbfc78846239aedb5cce51278e006 (commit)
This update added new revisions after undoing existing revisions. That is
to say, the old revision is not a strict subset of the new revision. This
situation occurs when you --force push a change and generate a repository
containing something like this:
* -- * -- B -- O -- O -- O (382f5f92853c202cc32a99851cdc0d2e6f6094c3)
\
N -- N -- N (df3f8b9ff5d03e766724acb7ac9c599521d0f633)
When this happens we assume that you've already had alert emails for all
of the O revisions, and so we here report only the revisions in the N
branch from the common base, B.
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/meta-telephony/commit/?id=df3f8b9ff5d03e766724acb7a…
commit df3f8b9ff5d03e766724acb7ac9c599521d0f633
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 18:19:27 2017 +0200
osmo-msc: Avoid installed duplicated binaries in osmo-bsc
Those two binaries are currently being installed by osmo-bsc too.
Change-Id: Ic582450f1881373785f12714ffa3bd150d37417e
http://cgit.osmocom.org/meta-telephony/commit/?id=51595539583edde7efbc87287…
commit 51595539583edde7efbc87287b3b198c44a30c0e
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 15:17:26 2017 +0200
openbsc: Drop packages present in other recipes after split
The osmo-bsc one is renamed to osmo-bsc-sccplite and kept because the
code in the new osmo-bsc repository still doesn't support SCCPLite, this
this one can still be used by installing the osmo-bsc-sccplite package.
Change-Id: Ifd029cbd36417ee980bff51b4112705be16175d3
http://cgit.osmocom.org/meta-telephony/commit/?id=07eb51c235a27bf18899b46a3…
commit 07eb51c235a27bf18899b46a39ae8e35c39318fd
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 14:30:51 2017 +0200
osmo-bsc: Introduce recipe
Change-Id: I06c529c01a72e16aa20a2c7a20e8b043718edab3
http://cgit.osmocom.org/meta-telephony/commit/?id=fcc9318ea36c5be8568e65d78…
commit fcc9318ea36c5be8568e65d78ad6b9cbe7588ea4
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 14:30:33 2017 +0200
osmo-msc: Introduce recipe
Change-Id: I68715d1970fde83fd6647344b82c6a859404ef9e
http://cgit.osmocom.org/meta-telephony/commit/?id=d0dd5b442336d7132f2e7422e…
commit d0dd5b442336d7132f2e7422eb05af16576000c6
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 14:29:24 2017 +0200
osmo-hlr: Introduce recipe
Change-Id: Ie7f47dca8d7e5e50792104ae0c7cb557391542f7
http://cgit.osmocom.org/meta-telephony/commit/?id=a69f611921cc56c508bbf87a1…
commit a69f611921cc56c508bbf87a1efe27a5451b873c
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 14:28:49 2017 +0200
osmo-mgw: Introduce recipe
Change-Id: If9c2d6b5dd8dfd8a0b462d87e93e0733e57f7b0a
http://cgit.osmocom.org/meta-telephony/commit/?id=e5c0ebaf2a2ef757f0ca7088f…
commit e5c0ebaf2a2ef757f0ca7088fac48377603361d3
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 14:30:16 2017 +0200
osmo-sgsn: Introduce recipe
Change-Id: Ia7e35660598bfd87917728c521c1fba827e98d68
http://cgit.osmocom.org/meta-telephony/commit/?id=5ee7d9ade99af6388b6a40d08…
commit 5ee7d9ade99af6388b6a40d08b60a5aad7c8d7cd
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 14:27:13 2017 +0200
osmo-iuh: Introduce recipe
Change-Id: I33d6dccad2336b83f4b4e89769b0796d1c87ed94
http://cgit.osmocom.org/meta-telephony/commit/?id=49508dda5bd5d2d86922a9def…
commit 49508dda5bd5d2d86922a9def542f8682007219e
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 14:26:12 2017 +0200
libasn1c: Introduce recipe
Change-Id: I50d990b06c56c3bfa71e7268694702300c0c9a26
http://cgit.osmocom.org/meta-telephony/commit/?id=bf1a781a172da14c389705797…
commit bf1a781a172da14c38970579730023c1c8945657
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Mon Sep 25 17:46:29 2017 +0200
Drop openggsn and introduce osmo-ggsn
Take the opportunity to enable systemd service instead of sysvint like other osmocom
services already do.
Change-Id: Ie6018ef78ff18f2e6809fee957c9d645e35c7c9a
http://cgit.osmocom.org/meta-telephony/commit/?id=f3b8764e6675f907592578c97…
commit f3b8764e6675f907592578c97f30a519af736d13
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Wed Sep 27 12:17:43 2017 +0200
libosmo-sccp: Install cfg and service file for osmo-stp
Patch with systemd service file is added while waiting to have it merged
in upstream.
Change-Id: Id82a12bbfb72b421c75140072048a963fb50f684
http://cgit.osmocom.org/meta-telephony/commit/?id=257099e16e34b960dd53dbe97…
commit 257099e16e34b960dd53dbe97a0fc0224b641051
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Wed Sep 6 12:09:52 2017 +0200
libosmo-abis: modify PV to match recent release
The upstream release commit is 7f17b8c45d094941292036143f3292a1d5789cf5.
This should fix current issue with 201705/nightly package feed:
$ opkg upgrade
Not selecting libosmo-abis 0.3.2+gitr0+d3292913ac as installing it would break existing dependencies.
$ opkg list_installed | grep libosmo-abis
libosmo-abis - 0.3.2+gitr2+d3292913ac-r2.18.1.0
See that gitr in repos is 0 while the previously installed one has
gitr2, which is higher. Explanations I can find for this:
- PR server was somehow reset?
- the value in gitr is calculated based on offset from latest tag. As
new release introduced new tag, gitr may have been reset.
In any case, updating PV to have the correct value should fix this
issue.
Change-Id: I9f27661d9e5241efe7725b7d1efcf4aef55e2efe
http://cgit.osmocom.org/meta-telephony/commit/?id=b493a3aba9a29213e7ad12b16…
commit b493a3aba9a29213e7ad12b165cc40439b8d5810
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Thu Aug 17 00:53:51 2017 +0200
update PV versions for libosmocore, libosmo-sccp and openggsn
As we're building git master, we need to make sure PV is not lagging
behind. I wish there was some OE magic by which it could discover
PV from the source it builds.
Change-Id: Ib45238e95156f215412d51d975b1acb33633a3e1
http://cgit.osmocom.org/meta-telephony/commit/?id=b8cbe5307d9312e5074905040…
commit b8cbe5307d9312e50749050408efb51e78cf1b17
Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com>
Date: Fri Jun 2 18:33:02 2017 +0800
libosmo-sccp: Attempt to fix link issue on 201705-nightly builds
This project will build some static libraries needed for testing
and also for downstream users. Do not disable the static build on
newer Poky versions.
arm-poky-linux-gnueabi-libtool: link: arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/home/jenkinsdebian8amd64/jenkins/workspace/201705-nightly/label/Debian8-AMD64/build/tmp/work/armv5te-poky-linux-gnueabi/libosmo-sccp/git-r1.18.1/recipe-sysroot -Wall -I/home/jenkinsdebian8amd64/jenkins/workspace/201705-nightly/label/Debian8-AMD64/build/tmp/work/armv5te-poky-linux-gnueabi/libosmo-sccp/git-r1.18.1/recipe-sysroot/usr/include/ -I/home/jenkinsdebian8amd64/jenkins/workspace/201705-nightly/label/Debian8-AMD64/build/tmp/work/armv5te-poky-linux-gnueabi/libosmo-sccp/git-r1.18.1/recipe-sysroot/usr/include/ -O2 -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/jenkinsdebian8amd64/jenkins/workspace/201705-nightly/label/Debian8-AMD64/build/tmp/work/armv5te-poky-linux-gnueabi/libosmo-sccp/git-r1.18.1=/usr/src/debug/libosmo-sccp/git-r1.18.1 -fdebug-prefix-map=/home/jenkinsdebian8amd64/jenkins/workspace/201705-nightly/label/Debian8-AMD64/build/tmp/work/armv5te-poky-linux-gnueabi/libosmo-sccp/git-r1.18.1/recipe-sysroot-native= -fdebug-prefix-map=/home/jenkinsdebian8amd64/jenkins/workspace/201705-nightly/label/Debian8-AMD64/build/tmp/work/armv5te-poky-linux-gnueabi/libosmo-sccp/git-r1.18.1/recipe-sysroot= -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -o xua_test xua_test.o sccp_test_data.o ../../src/.libs/libosmo-sigtran.so -losmogsm -ltalloc -losmovty -losmocore -losmonetif -lsctp
| xua_test.o: In function `test_helpers':
| /usr/src/debug/libosmo-sccp/git-r1.18.1/git/tests/xua/xua_test.c:160: undefined reference to `xua_part_add_gt'
| /usr/src/debug/libosmo-sccp/git-r1.18.1/git/tests/xua/xua_test.c:168: undefined reference to `sua_parse_gt'
| xua_test.o: In function `test_sccp2sua_case':
Change-Id: I80eea9ac888ab4b13614ff475bebacb94b72b0f2
http://cgit.osmocom.org/meta-telephony/commit/?id=4c655d4d53ffbfc78846239ae…
commit 4c655d4d53ffbfc78846239aedb5cce51278e006
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Mon Sep 25 17:22:56 2017 +0200
Update osmocom versions to point to current master
New versions are required in order to build new git repositories which
will deprecate osmo-nitb soon.
Change-Id: If36b86a6a542af7381d9a07da51a330f2e44a96f
-----------------------------------------------------------------------
Summary of changes:
recipes-osmocom/libosmo-sccp/libosmo-sccp.inc | 2 +-
recipes-osmocom/libosmo-sccp/libosmo-sccp_git.bb | 21 ++++++-
.../0001-Remove-unneeded-dbi-dependency.patch | 70 ----------------------
recipes-osmocom/osmo-bsc/osmo-bsc_git.bb | 5 +-
4 files changed, 22 insertions(+), 76 deletions(-)
delete mode 100644 recipes-osmocom/osmo-bsc/files/0001-Remove-unneeded-dbi-dependency.patch
hooks/post-receive
--
Osmocom layer for OpenEmbedded
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "An utility library for Open Source Mobile Communications".
The branch, master has been updated
via 505c965e3655b8ae94880a23baf8ecc2092163c4 (commit)
from f4f23bd6829f78741cfd586f0ca9a290f221242e (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/libosmocore/commit/?id=505c965e3655b8ae94880a23baf8…
commit 505c965e3655b8ae94880a23baf8ecc2092163c4
Author: Neels Hofmeyr <neels(a)hofmeyr.de>
Date: Tue Sep 26 15:24:58 2017 +0200
CTRL: add unit tests for CTRL command parsing
This uncovers some interesting behavior of the CTRL interface which we may want
to guard against in subsequent patches: trailing whitespace, ignored tokens,
special characters as cmd->id.
Change-Id: If7af06d50ca71fd528b08cd70310774d5a53f0f7
-----------------------------------------------------------------------
Summary of changes:
tests/ctrl/ctrl_test.c | 251 ++++++++++++++++++++++++++++++++++++++++++++++++
tests/ctrl/ctrl_test.ok | 102 ++++++++++++++++++++
2 files changed, 353 insertions(+)
hooks/post-receive
--
An utility library for Open Source Mobile Communications
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "An utility library for Open Source Mobile Communications".
The branch, master has been updated
via f4f23bd6829f78741cfd586f0ca9a290f221242e (commit)
via 607275c30be14266c4f1724b29a7cddea2062802 (commit)
from 6f4176785f4082ce0b3a80f860bcc0d40e9f49e9 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/libosmocore/commit/?id=f4f23bd6829f78741cfd586f0ca9…
commit f4f23bd6829f78741cfd586f0ca9a290f221242e
Author: Neels Hofmeyr <neels(a)hofmeyr.de>
Date: Wed Sep 20 15:39:37 2017 +0200
vty: install 'exit', 'end',... commands on *all* nodes
In many callers of the VTY API, we are lacking the vty_install_default() step
at certain node levels. This creates nodes that lack the 'exit' command, and
hence the only way to exit such a node is to restart the telnet session.
Historically, the VTY looked for missing commands on the immediate parent node,
and hence possibly found the parent's 'exit' command when the local node was
missing it. That is why we so far did not notice the missing default commands.
Furthermore, some callers call install_default() instead of
vty_install_default(). Only vty_install_default() also includes the 'exit' and
'end' commands. There is no reason why there are two sets of default commands.
To end this confusion, to catch all missing 'exit' commands and to prevent this
from re-appearing in the future, simply *always* install all default commands
implicitly when calling install_node().
In cmd_init(), there are some top-level nodes that apparently do not want the
default commands installed. Keep those the way they are, by changing the
invocation to new install_node_bare() ({VIEW,AUTH,AUTH_ENABLE}_NODE).
Make both install_default() and vty_install_default() no-ops so that users of
the API may still call them without harm. Do not yet deprecate yet, which
follows in Icf5d83f641e838cebcccc635a043e94ba352abff.
Drop all invocations to these two functions found in libosmocore.
Change-Id: I5021c64a787b63314e0f2f1cba0b8fc7bff4f09b
http://cgit.osmocom.org/libosmocore/commit/?id=607275c30be14266c4f1724b29a7…
commit 607275c30be14266c4f1724b29a7cddea2062802
Author: Neels Hofmeyr <neels(a)hofmeyr.de>
Date: Mon Sep 25 00:35:06 2017 +0200
gb: drop special vty exit commands, use vty_install_default()
L_NS_NODE and L_BSSGP_NODE had specialized 'exit' and 'end' vty commands, but
all they do is return to the CONFIG and ENABLE_NODEs like the default 'exit'
and 'end' commands. Drop them and use the default 'exit' and 'end' cmds.
Examining BSSGP and NS node behavior in osmo-sgsn exhibited identical list and
exit/end behavior before and after this patch.
Prepares for an upcoming commit incorporating vty_install_default() into
install_node(), see I5021c64a787b63314e0f2f1cba0b8fc7bff4f09b: this patch
changes to the default commands, the upcoming change implies them.
Change-Id: I5b0de066b4249d482c22620d5b1bcb03f381293c
-----------------------------------------------------------------------
Summary of changes:
include/osmocom/vty/command.h | 5 ++---
src/ctrl/control_vty.c | 1 -
src/gb/common_vty.c | 34 ----------------------------------
src/gb/common_vty.h | 3 ---
src/gb/gprs_bssgp_vty.c | 3 ---
src/gb/gprs_ns_vty.c | 3 ---
src/vty/command.c | 42 +++++++++++++++++++++++++++++-------------
src/vty/logging_vty.c | 1 -
src/vty/stats_vty.c | 1 -
src/vty/vty.c | 1 -
tests/vty/vty_test.c | 3 ---
11 files changed, 31 insertions(+), 66 deletions(-)
hooks/post-receive
--
An utility library for Open Source Mobile Communications
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "The OpenGGSN project".
The branch, master has been updated
via 6a21527a2d417eca602cd0af3461dfa285da8767 (commit)
from 1a8bc9839a69566e756c691ebd2d676082838c52 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/osmo-ggsn/commit/?id=6a21527a2d417eca602cd0af3461df…
commit 6a21527a2d417eca602cd0af3461dfa285da8767
Author: Max <msuraev(a)sysmocom.de>
Date: Mon Sep 25 10:35:34 2017 +0200
Move extended PDP logging macro to header
It might be useful for any user of libgtp who uses libosmocore so let's
make generalized version of it available as part of installable header.
Change-Id: I79aba10ef989384a28f059c30899e65c771ae5e1
Related: SYS#3610
-----------------------------------------------------------------------
Summary of changes:
TODO-RELEASE | 1 +
ggsn/ggsn.c | 3 +--
gtp/pdp.h | 3 +++
3 files changed, 5 insertions(+), 2 deletions(-)
hooks/post-receive
--
The OpenGGSN project
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "An utility library for Open Source Mobile Communications".
The branch, master has been updated
via 6f4176785f4082ce0b3a80f860bcc0d40e9f49e9 (commit)
from 463deef8c209dd7eb023ac70bf41fa9893ad35ed (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/libosmocore/commit/?id=6f4176785f4082ce0b3a80f860bc…
commit 6f4176785f4082ce0b3a80f860bcc0d40e9f49e9
Author: Neels Hofmeyr <neels(a)hofmeyr.de>
Date: Mon Sep 25 00:57:00 2017 +0200
vty: fix style: bssgp node vty prompt
Add trailing space and 'config-' prefix to match our common VTY node prompt
style.
Change-Id: I88db128cad9fcc6e53326b4aed5d06ea9102f328
-----------------------------------------------------------------------
Summary of changes:
src/gb/gprs_bssgp_vty.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
hooks/post-receive
--
An utility library for Open Source Mobile Communications
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "An utility library for Open Source Mobile Communications".
The branch, master has been updated
via 463deef8c209dd7eb023ac70bf41fa9893ad35ed (commit)
via 5584a14a319044f75c9d8ea74abb6dede21ea721 (commit)
from 383c5635e3920091469594ee01c2b9b13b6ea408 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/libosmocore/commit/?id=463deef8c209dd7eb023ac70bf41…
commit 463deef8c209dd7eb023ac70bf41fa9893ad35ed
Author: Vadim Yanitskiy <axilirator(a)gmail.com>
Date: Sat Sep 23 19:30:07 2017 +0330
VTY: implement talloc context introspection command
This change introduces a new command, which could be used to
inspect the application's talloc context directly from VTY.
To enable this feature, an application need to provide it's
context via the 'vty_app_info' struct, and register the VTY
command by calling the osmo_talloc_vty_add_cmds().
The new command is a sub-command of 'show':
show talloc-context <context> <depth> [filter]
Currently the following contexts may be inspected:
- application - a context provided by an application;
- null - all contexts, if NULL-context tracking is enabled.
A report depth is defined by the next parameter, and could be:
- full - full tree report, as the talloc_report_full() does;
- brief - brief tree report, as the talloc_report() does;
- DEPTH - user defined maximal report depth.
Also, there are two optional report filters:
- regexp - print only contexts, matching a regular expression;
- tree - print a specific context, pointed by specified address.
The command output is formatted the same way as in case of calling
the talloc_report() or talloc_report_full().
Change-Id: I43fc42880b22294d83c565ae600ac65e4f38b30d
http://cgit.osmocom.org/libosmocore/commit/?id=5584a14a319044f75c9d8ea74abb…
commit 5584a14a319044f75c9d8ea74abb6dede21ea721
Author: Vadim Yanitskiy <axilirator(a)gmail.com>
Date: Sat Sep 23 18:12:18 2017 +0330
vty/vty.c: do not bind vty context to application's one
The 'vty_app_info' struct could be used by some applications to
provide its talloc context. In the future, it will facilitate
the implementation of talloc context introspection via VTY.
But the 'vty' talloc context, that contains lots of items
(memory chunks), is being bound to an application's one,
so it becomes hard to read the last.
Let's do not bind the 'vty' context automatically, until some
common talloc context export policy is implemented.
Change-Id: I9cb6ce9f24dbae400029e2d9f9c933fbfb16248f
-----------------------------------------------------------------------
Summary of changes:
include/osmocom/vty/misc.h | 1 +
src/vty/Makefile.am | 3 +-
src/vty/talloc_ctx_vty.c | 279 +++++++++++++++++++++++++++++++++++++++++++++
src/vty/vty.c | 2 +-
4 files changed, 283 insertions(+), 2 deletions(-)
create mode 100644 src/vty/talloc_ctx_vty.c
hooks/post-receive
--
An utility library for Open Source Mobile Communications
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Legacy: The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)".
The branch, master has been updated
via f79eeca1095fb9493bf74c1fface8e70d61250e7 (commit)
from 3ae8682f974058970fa564f09a34a51e867b896b (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/openbsc/commit/?id=f79eeca1095fb9493bf74c1fface8e70…
commit f79eeca1095fb9493bf74c1fface8e70d61250e7
Author: Max <msuraev(a)sysmocom.de>
Date: Thu Sep 21 16:15:32 2017 +0200
Show OML link uptime in vty
Save the time when OML link to BTS was established and show it in
vty. That's useful when troubleshooting issues like periodic/sporadic
BTS restart.
Related: SYS#3889
Change-Id: I9e4e8504afe8ca467b68d41826f61654e24d9600
-----------------------------------------------------------------------
Summary of changes:
openbsc/include/openbsc/gsm_data_shared.h | 2 ++
openbsc/src/libbsc/bsc_vty.c | 20 ++++++++++++++++++--
openbsc/src/libbsc/bts_ipaccess_nanobts.c | 6 ++++++
openbsc/src/libbsc/e1_config.c | 6 +++++-
4 files changed, 31 insertions(+), 3 deletions(-)
hooks/post-receive
--
Legacy: The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "SCCP Library".
The branch, master has been updated
via 54fa75b85c91bb4bb79960942f63968f6423f6a5 (commit)
from ba57d31b35293b8f4afa09b540ae208669fbfe37 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/libosmo-sccp/commit/?id=54fa75b85c91bb4bb79960942f6…
commit 54fa75b85c91bb4bb79960942f63968f6423f6a5
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Wed Sep 27 12:04:54 2017 +0200
contrib: Add osmo-stp systemd service file
Change-Id: If6423222b5f1574701c48b5e93eb6c4918879d6c
-----------------------------------------------------------------------
Summary of changes:
contrib/systemd/osmo-stp.service | 11 +++++++++++
1 file changed, 11 insertions(+)
create mode 100644 contrib/systemd/osmo-stp.service
hooks/post-receive
--
SCCP Library
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Osmocom layer for OpenEmbedded".
The branch, pespin/split-openbsc has been updated
discards 74aa19e1be6dcb34d1b3996050dbecba514928a7 (commit)
discards e246a54db29bf5df3509b771271a1ca787339ff6 (commit)
discards 7e025c176b62339e9c2dc783c48edf4648041b67 (commit)
discards 6a8099acc8a45c8d83ba0fa01aa476bd1eb57624 (commit)
discards 5bf8e6e8832594b4b29580d7a109a596cda1bc5a (commit)
discards 633560775cfe414ff9ad4d71651bdb77fe84dabc (commit)
via 382f5f92853c202cc32a99851cdc0d2e6f6094c3 (commit)
via 5bef635b74ad73946b9ba0b3930b066ae2c4fb71 (commit)
via 084da7d655768430d1d4923911c89800e57c0ca6 (commit)
via 679bdfda76246ce82a3af17805aa9344202df33e (commit)
via c8663b330ebd3243cd6fb17c6f043cc96e0bd51c (commit)
via 1d75baca7ba27b0a0c68d805a5c540ce6ed8e2e6 (commit)
via 77570e6fbd49502fda650aa54c930dd6c3f6b4fe (commit)
via b0a620dc0cc7a168e10d2772e19f17b5441ba9a3 (commit)
via 82aec056f1e5055ba4738975b1b8fd1da4c3f9dd (commit)
via 445b721cde4d69bc318f1da23f8d7a565e39b989 (commit)
via e09581abd3df02ff725822c9882c6fa34f7c0bdf (commit)
via b73837c2795392d3d4e80151d38f339989a84c47 (commit)
via d532dfd72455db26ccd7d5143fd919049fc1621d (commit)
via 666a4acad84fef2a3f29f733ac232e7dcf828525 (commit)
via 9c92ec64f95d48e365a840ce829ef3a318270735 (commit)
This update added new revisions after undoing existing revisions. That is
to say, the old revision is not a strict subset of the new revision. This
situation occurs when you --force push a change and generate a repository
containing something like this:
* -- * -- B -- O -- O -- O (74aa19e1be6dcb34d1b3996050dbecba514928a7)
\
N -- N -- N (382f5f92853c202cc32a99851cdc0d2e6f6094c3)
When this happens we assume that you've already had alert emails for all
of the O revisions, and so we here report only the revisions in the N
branch from the common base, B.
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/meta-telephony/commit/?id=382f5f92853c202cc32a99851…
commit 382f5f92853c202cc32a99851cdc0d2e6f6094c3
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 18:19:27 2017 +0200
osmo-msc: Avoid installed duplicated binaries in osmo-bsc
Those two binaries are currently being installed by osmo-bsc too.
Change-Id: Ic582450f1881373785f12714ffa3bd150d37417e
http://cgit.osmocom.org/meta-telephony/commit/?id=5bef635b74ad73946b9ba0b39…
commit 5bef635b74ad73946b9ba0b3930b066ae2c4fb71
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 15:17:26 2017 +0200
openbsc: Drop packages present in other recipes after split
The osmo-bsc one is renamed to osmo-bsc-sccplite and kept because the
code in the new osmo-bsc repository still doesn't support SCCPLite, this
this one can still be used by installing the osmo-bsc-sccplite package.
Change-Id: Ifd029cbd36417ee980bff51b4112705be16175d3
http://cgit.osmocom.org/meta-telephony/commit/?id=084da7d655768430d1d492391…
commit 084da7d655768430d1d4923911c89800e57c0ca6
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 16:36:19 2017 +0200
osmo-bsc: Remove unneeded dependency breaking build
Change-Id: Icf8174aa529ab15bd20011a8774220e8c17f6cd1
http://cgit.osmocom.org/meta-telephony/commit/?id=679bdfda76246ce82a3af1780…
commit 679bdfda76246ce82a3af17805aa9344202df33e
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 14:30:51 2017 +0200
osmo-bsc: Introduce recipe
Change-Id: I06c529c01a72e16aa20a2c7a20e8b043718edab3
http://cgit.osmocom.org/meta-telephony/commit/?id=c8663b330ebd3243cd6fb17c6…
commit c8663b330ebd3243cd6fb17c6f043cc96e0bd51c
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 14:30:33 2017 +0200
osmo-msc: Introduce recipe
Change-Id: I68715d1970fde83fd6647344b82c6a859404ef9e
http://cgit.osmocom.org/meta-telephony/commit/?id=1d75baca7ba27b0a0c68d805a…
commit 1d75baca7ba27b0a0c68d805a5c540ce6ed8e2e6
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 14:29:24 2017 +0200
osmo-hlr: Introduce recipe
Change-Id: Ie7f47dca8d7e5e50792104ae0c7cb557391542f7
http://cgit.osmocom.org/meta-telephony/commit/?id=77570e6fbd49502fda650aa54…
commit 77570e6fbd49502fda650aa54c930dd6c3f6b4fe
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 14:28:49 2017 +0200
osmo-mgw: Introduce recipe
Change-Id: If9c2d6b5dd8dfd8a0b462d87e93e0733e57f7b0a
http://cgit.osmocom.org/meta-telephony/commit/?id=b0a620dc0cc7a168e10d2772e…
commit b0a620dc0cc7a168e10d2772e19f17b5441ba9a3
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 14:30:16 2017 +0200
osmo-sgsn: Introduce recipe
Change-Id: Ia7e35660598bfd87917728c521c1fba827e98d68
http://cgit.osmocom.org/meta-telephony/commit/?id=82aec056f1e5055ba4738975b…
commit 82aec056f1e5055ba4738975b1b8fd1da4c3f9dd
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 14:27:13 2017 +0200
osmo-iuh: Introduce recipe
Change-Id: I33d6dccad2336b83f4b4e89769b0796d1c87ed94
http://cgit.osmocom.org/meta-telephony/commit/?id=445b721cde4d69bc318f1da23…
commit 445b721cde4d69bc318f1da23f8d7a565e39b989
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Tue Sep 26 14:26:12 2017 +0200
libasn1c: Introduce recipe
Change-Id: I50d990b06c56c3bfa71e7268694702300c0c9a26
http://cgit.osmocom.org/meta-telephony/commit/?id=e09581abd3df02ff725822c98…
commit e09581abd3df02ff725822c9882c6fa34f7c0bdf
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Mon Sep 25 17:46:29 2017 +0200
Drop openggsn and introduce osmo-ggsn
Take the opportunity to enable systemd service instead of sysvint like other osmocom
services already do.
Change-Id: Ie6018ef78ff18f2e6809fee957c9d645e35c7c9a
http://cgit.osmocom.org/meta-telephony/commit/?id=b73837c2795392d3d4e80151d…
commit b73837c2795392d3d4e80151d38f339989a84c47
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Wed Sep 6 12:09:52 2017 +0200
libosmo-abis: modify PV to match recent release
The upstream release commit is 7f17b8c45d094941292036143f3292a1d5789cf5.
This should fix current issue with 201705/nightly package feed:
$ opkg upgrade
Not selecting libosmo-abis 0.3.2+gitr0+d3292913ac as installing it would break existing dependencies.
$ opkg list_installed | grep libosmo-abis
libosmo-abis - 0.3.2+gitr2+d3292913ac-r2.18.1.0
See that gitr in repos is 0 while the previously installed one has
gitr2, which is higher. Explanations I can find for this:
- PR server was somehow reset?
- the value in gitr is calculated based on offset from latest tag. As
new release introduced new tag, gitr may have been reset.
In any case, updating PV to have the correct value should fix this
issue.
Change-Id: I9f27661d9e5241efe7725b7d1efcf4aef55e2efe
http://cgit.osmocom.org/meta-telephony/commit/?id=d532dfd72455db26ccd7d5143…
commit d532dfd72455db26ccd7d5143fd919049fc1621d
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Thu Aug 17 00:53:51 2017 +0200
update PV versions for libosmocore, libosmo-sccp and openggsn
As we're building git master, we need to make sure PV is not lagging
behind. I wish there was some OE magic by which it could discover
PV from the source it builds.
Change-Id: Ib45238e95156f215412d51d975b1acb33633a3e1
http://cgit.osmocom.org/meta-telephony/commit/?id=666a4acad84fef2a3f29f733a…
commit 666a4acad84fef2a3f29f733ac232e7dcf828525
Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com>
Date: Fri Jun 2 18:33:02 2017 +0800
libosmo-sccp: Attempt to fix link issue on 201705-nightly builds
This project will build some static libraries needed for testing
and also for downstream users. Do not disable the static build on
newer Poky versions.
arm-poky-linux-gnueabi-libtool: link: arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/home/jenkinsdebian8amd64/jenkins/workspace/201705-nightly/label/Debian8-AMD64/build/tmp/work/armv5te-poky-linux-gnueabi/libosmo-sccp/git-r1.18.1/recipe-sysroot -Wall -I/home/jenkinsdebian8amd64/jenkins/workspace/201705-nightly/label/Debian8-AMD64/build/tmp/work/armv5te-poky-linux-gnueabi/libosmo-sccp/git-r1.18.1/recipe-sysroot/usr/include/ -I/home/jenkinsdebian8amd64/jenkins/workspace/201705-nightly/label/Debian8-AMD64/build/tmp/work/armv5te-poky-linux-gnueabi/libosmo-sccp/git-r1.18.1/recipe-sysroot/usr/include/ -O2 -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/jenkinsdebian8amd64/jenkins/workspace/201705-nightly/label/Debian8-AMD64/build/tmp/work/armv5te-poky-linux-gnueabi/libosmo-sccp/git-r1.18.1=/usr/src/debug/libosmo-sccp/git-r1.18.1 -fdebug-prefix-map=/home/jenkinsdebian8amd64/jenkins/workspace/201705-nightly/label/Debian8-AMD64/build/tmp/work/armv5te-poky-linux-gnueabi/libosmo-sccp/git-r1.18.1/recipe-sysroot-native= -fdebug-prefix-map=/home/jenkinsdebian8amd64/jenkins/workspace/201705-nightly/label/Debian8-AMD64/build/tmp/work/armv5te-poky-linux-gnueabi/libosmo-sccp/git-r1.18.1/recipe-sysroot= -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -o xua_test xua_test.o sccp_test_data.o ../../src/.libs/libosmo-sigtran.so -losmogsm -ltalloc -losmovty -losmocore -losmonetif -lsctp
| xua_test.o: In function `test_helpers':
| /usr/src/debug/libosmo-sccp/git-r1.18.1/git/tests/xua/xua_test.c:160: undefined reference to `xua_part_add_gt'
| /usr/src/debug/libosmo-sccp/git-r1.18.1/git/tests/xua/xua_test.c:168: undefined reference to `sua_parse_gt'
| xua_test.o: In function `test_sccp2sua_case':
Change-Id: I80eea9ac888ab4b13614ff475bebacb94b72b0f2
http://cgit.osmocom.org/meta-telephony/commit/?id=9c92ec64f95d48e365a840ce8…
commit 9c92ec64f95d48e365a840ce829ef3a318270735
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Mon Sep 25 17:22:56 2017 +0200
Update osmocom versions to point to current master
New versions are required in order to build new git repositories which
will deprecate osmo-nitb soon.
Change-Id: If36b86a6a542af7381d9a07da51a330f2e44a96f
-----------------------------------------------------------------------
Summary of changes:
.../libasn1c/{libasn1c_git.bb => libasn1c.inc} | 10 +---
recipes-osmocom/libasn1c/libasn1c_git.bb | 13 +---
recipes-osmocom/libosmo-abis/libosmo-abis_git.bb | 2 +-
recipes-osmocom/libosmo-netif/libosmo-netif_git.bb | 2 +-
recipes-osmocom/libosmo-sccp/libosmo-sccp_git.bb | 2 +-
recipes-osmocom/openbsc/openbsc.inc | 70 +++++++---------------
.../{osmo-bsc.init => osmo-bsc-sccplite.init} | 12 ++--
.../openbsc/openbsc/osmo-bsc-sccplite.service | 12 ++++
recipes-osmocom/openbsc/openbsc_git.bb | 2 +-
.../0001-Remove-unneeded-dbi-dependency.patch | 70 ++++++++++++++++++++++
recipes-osmocom/osmo-bsc/osmo-bsc.inc | 29 ++++++++-
recipes-osmocom/osmo-bsc/osmo-bsc_git.bb | 24 +-------
recipes-osmocom/osmo-hlr/osmo-hlr.inc | 16 ++++-
recipes-osmocom/osmo-hlr/osmo-hlr_git.bb | 10 ----
recipes-osmocom/osmo-iuh/osmo-iuh.inc | 16 ++++-
recipes-osmocom/osmo-iuh/osmo-iuh_git.bb | 10 ----
recipes-osmocom/osmo-mgw/osmo-mgw.inc | 18 +++++-
recipes-osmocom/osmo-mgw/osmo-mgw_git.bb | 12 ----
recipes-osmocom/osmo-msc/osmo-msc.inc | 19 +++++-
recipes-osmocom/osmo-msc/osmo-msc_git.bb | 10 ----
recipes-osmocom/osmo-sgsn/osmo-sgsn.inc | 32 +++++++++-
recipes-osmocom/osmo-sgsn/osmo-sgsn_git.bb | 29 ---------
22 files changed, 236 insertions(+), 184 deletions(-)
copy recipes-osmocom/libasn1c/{libasn1c_git.bb => libasn1c.inc} (58%)
rename recipes-osmocom/openbsc/openbsc/{osmo-bsc.init => osmo-bsc-sccplite.init} (67%)
create mode 100644 recipes-osmocom/openbsc/openbsc/osmo-bsc-sccplite.service
create mode 100644 recipes-osmocom/osmo-bsc/files/0001-Remove-unneeded-dbi-dependency.patch
hooks/post-receive
--
Osmocom layer for OpenEmbedded
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Osmocom layer for OpenEmbedded".
The branch, pespin/split-openbsc has been updated
discards 958b3bcc0e8be3cea502ce1b190dba41d40d2c88 (commit)
via 74aa19e1be6dcb34d1b3996050dbecba514928a7 (commit)
This update added new revisions after undoing existing revisions. That is
to say, the old revision is not a strict subset of the new revision. This
situation occurs when you --force push a change and generate a repository
containing something like this:
* -- * -- B -- O -- O -- O (958b3bcc0e8be3cea502ce1b190dba41d40d2c88)
\
N -- N -- N (74aa19e1be6dcb34d1b3996050dbecba514928a7)
When this happens we assume that you've already had alert emails for all
of the O revisions, and so we here report only the revisions in the N
branch from the common base, B.
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/meta-telephony/commit/?id=74aa19e1be6dcb34d1b399605…
commit 74aa19e1be6dcb34d1b3996050dbecba514928a7
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Mon Sep 25 19:19:30 2017 +0200
WIP
Change-Id: I5639d39e0a3239965bc802ba102166d2ae74ea5e
-----------------------------------------------------------------------
Summary of changes:
.../osmo-iuh.inc => osmo-bsc/osmo-bsc.inc} | 8 +++----
recipes-osmocom/osmo-bsc/osmo-bsc_git.bb | 28 ++++++++++++++++++++++
recipes-osmocom/osmo-mgw/osmo-mgw_git.bb | 2 +-
recipes-osmocom/osmo-msc/osmo-msc.inc | 1 -
recipes-osmocom/osmo-msc/osmo-msc_git.bb | 2 +-
recipes-osmocom/osmo-sgsn/osmo-sgsn.inc | 7 +++---
recipes-osmocom/osmo-sgsn/osmo-sgsn_git.bb | 20 ++++++++++++----
7 files changed, 53 insertions(+), 15 deletions(-)
copy recipes-osmocom/{osmo-iuh/osmo-iuh.inc => osmo-bsc/osmo-bsc.inc} (61%)
create mode 100644 recipes-osmocom/osmo-bsc/osmo-bsc_git.bb
hooks/post-receive
--
Osmocom layer for OpenEmbedded
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "An utility library for Open Source Mobile Communications".
The branch, master has been updated
via 383c5635e3920091469594ee01c2b9b13b6ea408 (commit)
from 657c5b6cadcef470c7ff9bffed3caab227026e6a (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/libosmocore/commit/?id=383c5635e3920091469594ee01c2…
commit 383c5635e3920091469594ee01c2b9b13b6ea408
Author: Max <msuraev(a)sysmocom.de>
Date: Mon Sep 25 16:37:37 2017 +0200
Add time conversion helpers
Add macros to break down absolute time in seconds into days/hours/minutes
passed.
Change-Id: I46b9a405c18ed9da8f31b7d5b6dcece5468bafbf
-----------------------------------------------------------------------
Summary of changes:
include/osmocom/core/timer.h | 5 +++++
1 file changed, 5 insertions(+)
hooks/post-receive
--
An utility library for Open Source Mobile Communications
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Manuals for Osmocom GSM components".
The branch, neels/osmo-hlr has been created
at f8643f57f0e39230ad59b32a48b5987927e67100 (commit)
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/osmo-gsm-manuals/commit/?id=f8643f57f0e39230ad59b32…
commit f8643f57f0e39230ad59b32a48b5987927e67100
Author: Neels Hofmeyr <neels(a)hofmeyr.de>
Date: Mon Sep 25 16:37:34 2017 +0200
add OsmoHLR manual
Change-Id: Ieb6a362a26a7e65199f68f5cd32d9b6b0e5d0fbf
http://cgit.osmocom.org/osmo-gsm-manuals/commit/?id=d823797ae53da9fc810f13c…
commit d823797ae53da9fc810f13c93ffb9db1a797c904
Author: Neels Hofmeyr <neels(a)hofmeyr.de>
Date: Mon Sep 18 16:19:30 2017 +0200
add OsmoMSC manual
Add OsmoMSC and OsmoHLR to bibliography (even though the OsmoHLR manual does
not yet exist, a reference to it has been added in OsmoMSC's manual).
Change-Id: I9ecff2837fbf5fdc19675a726f6d70c21eb178ee
http://cgit.osmocom.org/osmo-gsm-manuals/commit/?id=f56996aa41812372e5bdc34…
commit f56996aa41812372e5bdc34c0a23f6d71fa4dcc4
Author: Neels Hofmeyr <neels(a)hofmeyr.de>
Date: Sun Sep 24 22:49:02 2017 +0200
move mncc.adoc to common chapters
Upcoming OsmoMSC will reference the same, hence MNCC becomes a common chapter.
Move the file and adjust various wording to include OsmoMSC.
Change-Id: I404758ff7f1372e841ffe33c75455f513fff3caf
-----------------------------------------------------------------------
hooks/post-receive
--
Manuals for Osmocom GSM components
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Osmocom layer for OpenEmbedded".
The branch, pespin/split-openbsc has been created
at 958b3bcc0e8be3cea502ce1b190dba41d40d2c88 (commit)
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/meta-telephony/commit/?id=958b3bcc0e8be3cea502ce1b1…
commit 958b3bcc0e8be3cea502ce1b190dba41d40d2c88
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Mon Sep 25 19:19:30 2017 +0200
WIP
Change-Id: I5639d39e0a3239965bc802ba102166d2ae74ea5e
http://cgit.osmocom.org/meta-telephony/commit/?id=e246a54db29bf5df3509b7712…
commit e246a54db29bf5df3509b771271a1ca787339ff6
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Mon Sep 25 17:46:29 2017 +0200
Drop openggsn and introduce osmo-ggsn
Take the opportunity to enable systemd service instead of sysvint like other osmocom
services already do.
Change-Id: Ie6018ef78ff18f2e6809fee957c9d645e35c7c9a
http://cgit.osmocom.org/meta-telephony/commit/?id=7e025c176b62339e9c2dc783c…
commit 7e025c176b62339e9c2dc783c48edf4648041b67
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Wed Sep 6 12:09:52 2017 +0200
libosmo-abis: modify PV to match recent release
The upstream release commit is 7f17b8c45d094941292036143f3292a1d5789cf5.
This should fix current issue with 201705/nightly package feed:
$ opkg upgrade
Not selecting libosmo-abis 0.3.2+gitr0+d3292913ac as installing it would break existing dependencies.
$ opkg list_installed | grep libosmo-abis
libosmo-abis - 0.3.2+gitr2+d3292913ac-r2.18.1.0
See that gitr in repos is 0 while the previously installed one has
gitr2, which is higher. Explanations I can find for this:
- PR server was somehow reset?
- the value in gitr is calculated based on offset from latest tag. As
new release introduced new tag, gitr may have been reset.
In any case, updating PV to have the correct value should fix this
issue.
Change-Id: I9f27661d9e5241efe7725b7d1efcf4aef55e2efe
http://cgit.osmocom.org/meta-telephony/commit/?id=6a8099acc8a45c8d83ba0fa01…
commit 6a8099acc8a45c8d83ba0fa01aa476bd1eb57624
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Thu Aug 17 00:53:51 2017 +0200
update PV versions for libosmocore, libosmo-sccp and openggsn
As we're building git master, we need to make sure PV is not lagging
behind. I wish there was some OE magic by which it could discover
PV from the source it builds.
Change-Id: Ib45238e95156f215412d51d975b1acb33633a3e1
http://cgit.osmocom.org/meta-telephony/commit/?id=5bf8e6e8832594b4b29580d7a…
commit 5bf8e6e8832594b4b29580d7a109a596cda1bc5a
Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com>
Date: Fri Jun 2 18:33:02 2017 +0800
libosmo-sccp: Attempt to fix link issue on 201705-nightly builds
This project will build some static libraries needed for testing
and also for downstream users. Do not disable the static build on
newer Poky versions.
arm-poky-linux-gnueabi-libtool: link: arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/home/jenkinsdebian8amd64/jenkins/workspace/201705-nightly/label/Debian8-AMD64/build/tmp/work/armv5te-poky-linux-gnueabi/libosmo-sccp/git-r1.18.1/recipe-sysroot -Wall -I/home/jenkinsdebian8amd64/jenkins/workspace/201705-nightly/label/Debian8-AMD64/build/tmp/work/armv5te-poky-linux-gnueabi/libosmo-sccp/git-r1.18.1/recipe-sysroot/usr/include/ -I/home/jenkinsdebian8amd64/jenkins/workspace/201705-nightly/label/Debian8-AMD64/build/tmp/work/armv5te-poky-linux-gnueabi/libosmo-sccp/git-r1.18.1/recipe-sysroot/usr/include/ -O2 -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/jenkinsdebian8amd64/jenkins/workspace/201705-nightly/label/Debian8-AMD64/build/tmp/work/armv5te-poky-linux-gnueabi/libosmo-sccp/git-r1.18.1=/usr/src/debug/libosmo-sccp/git-r1.18.1 -fdebug-prefix-map=/home/jenkinsdebian8amd64/jenkins/workspace/201705-nightly/label/Debian8-AMD64/build/tmp/work/armv5te-poky-linux-gnueabi/libosmo-sccp/git-r1.18.1/recipe-sysroot-native= -fdebug-prefix-map=/home/jenkinsdebian8amd64/jenkins/workspace/201705-nightly/label/Debian8-AMD64/build/tmp/work/armv5te-poky-linux-gnueabi/libosmo-sccp/git-r1.18.1/recipe-sysroot= -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -o xua_test xua_test.o sccp_test_data.o ../../src/.libs/libosmo-sigtran.so -losmogsm -ltalloc -losmovty -losmocore -losmonetif -lsctp
| xua_test.o: In function `test_helpers':
| /usr/src/debug/libosmo-sccp/git-r1.18.1/git/tests/xua/xua_test.c:160: undefined reference to `xua_part_add_gt'
| /usr/src/debug/libosmo-sccp/git-r1.18.1/git/tests/xua/xua_test.c:168: undefined reference to `sua_parse_gt'
| xua_test.o: In function `test_sccp2sua_case':
Change-Id: I80eea9ac888ab4b13614ff475bebacb94b72b0f2
http://cgit.osmocom.org/meta-telephony/commit/?id=633560775cfe414ff9ad4d716…
commit 633560775cfe414ff9ad4d71651bdb77fe84dabc
Author: Pau Espin Pedrol <pespin(a)sysmocom.de>
Date: Mon Sep 25 17:22:56 2017 +0200
Update osmocom versions to point to current master
New versions are required in order to build new git repositories which
will deprecate osmo-nitb soon.
Change-Id: If36b86a6a542af7381d9a07da51a330f2e44a96f
-----------------------------------------------------------------------
hooks/post-receive
--
Osmocom layer for OpenEmbedded
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "SCCP Library".
The branch, master has been updated
via ba57d31b35293b8f4afa09b540ae208669fbfe37 (commit)
from 3488cf5b8570cc7a2e6894870705645cfc9baa88 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/libosmo-sccp/commit/?id=ba57d31b35293b8f4afa09b540a…
commit ba57d31b35293b8f4afa09b540ae208669fbfe37
Author: Philipp Maier <pmaier(a)sysmocom.de>
Date: Thu Sep 14 13:49:20 2017 +0200
simple client: prevent overwriting asp settings
If the user does not create an AS, but creates an ASP with a name
that is equal to the default name, then the simple client detects
that and trys to use this ASP. However, unfortunately it then
overwrites the settings of the ASP with the default settings.
If the detected ASP is not created by the simple client, use it,
but preseve the settings of that ASP.
Change-Id: I53d73059f804c3bbea6cb43dc73ad49a753b3b15
-----------------------------------------------------------------------
Summary of changes:
src/sccp_user.c | 41 ++++++++++++++++++++++++++++-------------
1 file changed, 28 insertions(+), 13 deletions(-)
hooks/post-receive
--
SCCP Library
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Manuals for Osmocom GSM components".
The branch, master has been updated
via 271f5b408186e7deba1f84fca926aab7b6447b6b (commit)
from 52136c3ae3aa7f07f2a46d8863ecd7621e83eaaf (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/osmo-gsm-manuals/commit/?id=271f5b408186e7deba1f84f…
commit 271f5b408186e7deba1f84fca926aab7b6447b6b
Author: Max <msuraev(a)sysmocom.de>
Date: Fri Sep 22 14:36:51 2017 +0200
Expand OsmoGGSN manual
* add cross-references
* add example of running without root priviledges
Change-Id: I1743f370ee2b351d2847f2e29e0f59f35cd401f4
-----------------------------------------------------------------------
Summary of changes:
OsmoGGSN/chapters/configuration.adoc | 57 ++++++++++++++++++++++++++++++++----
common/chapters/bibliography.adoc | 6 ++--
2 files changed, 55 insertions(+), 8 deletions(-)
hooks/post-receive
--
Manuals for Osmocom GSM components
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Legacy: The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)".
The branch, master has been updated
via 3ae8682f974058970fa564f09a34a51e867b896b (commit)
from 1cbc7e1adf859a7d5b05fa0dbdde1bb0cb998041 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/openbsc/commit/?id=3ae8682f974058970fa564f09a34a51e…
commit 3ae8682f974058970fa564f09a34a51e867b896b
Author: Max <msuraev(a)sysmocom.de>
Date: Sat Sep 23 14:51:49 2017 +0200
CTRL: cleanup write-only command functions
Remove trivial functions by using more specific defines for CTRL
commands.
Change-Id: I719b75b6ca1e9372ea11e7e9ff7896021f357035
-----------------------------------------------------------------------
Summary of changes:
openbsc/src/osmo-bsc/osmo_bsc_ctrl.c | 34 +++-------------------------------
1 file changed, 3 insertions(+), 31 deletions(-)
hooks/post-receive
--
Legacy: The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "UNNAMED PROJECT".
The branch, master has been updated
via d2e793a58aceb19fea1d29b550894407331fea7f (commit)
via a784f2407b087e17ba4a6447e4f1b5cf6c524e22 (commit)
via 8e4806c5f20f082c911f5a95d88c5fdd2c26d58b (commit)
from f41db1e337d66c9b904a553d63e3babf22223249 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
-----------------------------------------------------------------------
Summary of changes:
osmopy/osmodumpdoc.py | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
hooks/post-receive
--
UNNAMED PROJECT
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Manuals for Osmocom GSM components".
The branch, master has been updated
via 52136c3ae3aa7f07f2a46d8863ecd7621e83eaaf (commit)
from 0e3e4c217add2744307b81d3e8c715c3ddc2c119 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/osmo-gsm-manuals/commit/?id=52136c3ae3aa7f07f2a46d8…
commit 52136c3ae3aa7f07f2a46d8863ecd7621e83eaaf
Author: Neels Hofmeyr <neels(a)hofmeyr.de>
Date: Fri Sep 22 17:41:16 2017 +0200
fix various grammar and typos in: preface, cell-broadcast
Change-Id: I0c61ad0e824b0d62bb9332f2208b247d3852dbb5
-----------------------------------------------------------------------
Summary of changes:
common/chapters/cell-broadcast.adoc | 2 +-
common/chapters/preface.adoc | 12 ++++++------
2 files changed, 7 insertions(+), 7 deletions(-)
hooks/post-receive
--
Manuals for Osmocom GSM components
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "A/B/C Netz".
The branch, master has been updated
via f469879ed03b294b675c886182dbf70030761417 (commit)
via ff5faa8697eb31e9a8b02734dac0261b66757c78 (commit)
via c1fe179d5d5dab87f19f6dd1326c4a631e666a3d (commit)
via b6468b585d06446a9aec139c66af35568b356484 (commit)
via 08dd180ea0382b0339deb34928c05483b4d029c9 (commit)
via 274cb7992b4b1498d1b55db322844ada0eab8cad (commit)
via 0b7b8f12c630203bd97710f33cba6f376c383aea (commit)
via 3b7c515f6f8f085dbf31db132186f4ff15d43cd3 (commit)
from 5b1956fe49f958a4674f4e470fc8a63bc5576016 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/osmocom-analog/commit/?id=f469879ed03b294b675c88618…
commit f469879ed03b294b675c886182dbf70030761417
Author: Andreas Eversberg <jolly(a)eversberg.eu>
Date: Sun Sep 24 15:59:24 2017 +0200
SDR: Use filter to remove harmonics caused by downsampling/upsampling
This drastically increases the signal-noise-ratio and removes co-channel
interferences. It gains CPU usage, but only on SDR threads, not on the
main thread.
http://cgit.osmocom.org/osmocom-analog/commit/?id=ff5faa8697eb31e9a8b02734d…
commit ff5faa8697eb31e9a8b02734dac0261b66757c78
Author: Andreas Eversberg <jolly(a)eversberg.eu>
Date: Sun Sep 24 14:13:34 2017 +0200
SDR: Improved IQ plot display, increase dynamics of spectrum display
http://cgit.osmocom.org/osmocom-analog/commit/?id=c1fe179d5d5dab87f19f6dd13…
commit c1fe179d5d5dab87f19f6dd1326c4a631e666a3d
Author: Andreas Eversberg <jolly(a)eversberg.eu>
Date: Sun Sep 24 14:11:54 2017 +0200
AMPS: Fix 'use-after-free-bug' after destroying transaction
http://cgit.osmocom.org/osmocom-analog/commit/?id=b6468b585d06446a9aec139c6…
commit b6468b585d06446a9aec139c66af35568b356484
Author: Andreas Eversberg <jolly(a)eversberg.eu>
Date: Fri Sep 22 16:51:47 2017 +0200
NMT: Minor fixes on frame data
http://cgit.osmocom.org/osmocom-analog/commit/?id=08dd180ea0382b0339deb3492…
commit 08dd180ea0382b0339deb34928c05483b4d029c9
Author: Andreas Eversberg <jolly(a)eversberg.eu>
Date: Thu Sep 21 19:22:03 2017 +0200
Add echo test feature to check mobile phone's mic + speaker
Add '-e' to command line option, but do not select MNCC nor call device
http://cgit.osmocom.org/osmocom-analog/commit/?id=274cb7992b4b1498d1b55db32…
commit 274cb7992b4b1498d1b55db322844ada0eab8cad
Author: Andreas Eversberg <jolly(a)eversberg.eu>
Date: Sat Sep 16 10:05:26 2017 +0200
SDR: Improvement of spectrum view, peaks are drawn correctly
http://cgit.osmocom.org/osmocom-analog/commit/?id=0b7b8f12c630203bd97710f33…
commit 0b7b8f12c630203bd97710f33cba6f376c383aea
Author: Andreas Eversberg <jolly(a)eversberg.eu>
Date: Sat Sep 16 00:14:41 2017 +0200
work on docs
http://cgit.osmocom.org/osmocom-analog/commit/?id=3b7c515f6f8f085dbf31db132…
commit 3b7c515f6f8f085dbf31db132186f4ff15d43cd3
Author: Andreas Eversberg <jolly(a)eversberg.eu>
Date: Mon Sep 11 20:42:06 2017 +0200
add new libs.a to .gitignore
-----------------------------------------------------------------------
Summary of changes:
.gitignore | 2 +
docs/index.html | 4 ++
docs/radiocom2000.html | 6 +++
docs/standard_r2000_by_jolly.pdf | Bin 0 -> 60086 bytes
src/amps/amps.c | 6 +--
src/common/call.c | 41 +++++++++++----
src/common/call.h | 2 +-
src/common/display.h | 2 +-
src/common/display_iq.c | 105 ++++++++++++++++++++++-----------------
src/common/display_spectrum.c | 41 +++++++++++----
src/common/iir_filter.c | 34 +++++++++++++
src/common/iir_filter.h | 1 +
src/common/main_mobile.c | 31 ++++++++----
src/common/main_mobile.h | 3 --
src/common/sdr.c | 29 ++++++++++-
src/nmt/frame.c | 4 +-
16 files changed, 223 insertions(+), 88 deletions(-)
create mode 100644 docs/standard_r2000_by_jolly.pdf
hooks/post-receive
--
A/B/C Netz
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "An utility library for Open Source Mobile Communications".
The branch, neels/vty_indent_debug has been updated
discards ade800e1018bc8960559baef314e0266b3598769 (commit)
discards d0de6ab897249ac9a0a8f9bf46d3508bea55d93e (commit)
via 9791359e6d5aeafff67a7fbdb2dbe5b18aafad31 (commit)
via c3a3f685140ce3fb8f3e919481d5ac68c4da34f9 (commit)
via 657c5b6cadcef470c7ff9bffed3caab227026e6a (commit)
via 0b723f6a6cdc4171ee67ddd8d8c1bb812fb4cf06 (commit)
via b022c867e86333ceaad9027e2e7ee621ab3891e5 (commit)
via 00b5ed3d921f2f39e60ed372809c33b8bce78ad8 (commit)
via 430636328c2fbd9fffc0eac5114462c200b7f2cb (commit)
This update added new revisions after undoing existing revisions. That is
to say, the old revision is not a strict subset of the new revision. This
situation occurs when you --force push a change and generate a repository
containing something like this:
* -- * -- B -- O -- O -- O (ade800e1018bc8960559baef314e0266b3598769)
\
N -- N -- N (9791359e6d5aeafff67a7fbdb2dbe5b18aafad31)
When this happens we assume that you've already had alert emails for all
of the O revisions, and so we here report only the revisions in the N
branch from the common base, B.
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/libosmocore/commit/?id=9791359e6d5aeafff67a7fbdb2db…
commit 9791359e6d5aeafff67a7fbdb2dbe5b18aafad31
Author: Neels Hofmeyr <neels(a)hofmeyr.de>
Date: Wed Sep 20 02:43:19 2017 +0200
wip
Change-Id: Iaba89c63cb19364969005ffe1310a142af9088d2
http://cgit.osmocom.org/libosmocore/commit/?id=c3a3f685140ce3fb8f3e919481d5…
commit c3a3f685140ce3fb8f3e919481d5ac68c4da34f9
Author: Neels Hofmeyr <neels(a)hofmeyr.de>
Date: Tue Sep 12 04:06:50 2017 +0200
NOT FOR MERGE: vty indentation debug
Change-Id: I48f2d7c34ea160a8ca36ab83f462ffd7e660065e
-----------------------------------------------------------------------
Summary of changes:
include/osmocom/vty/command.h | 5 ++
src/vty/command.c | 145 ++++++++++++++++++++++++++--------
tests/vty/fail_not_de-indented.cfg | 6 +-
tests/vty/fail_tabs_and_spaces.cfg | 8 +-
tests/vty/fail_too_much_indent.cfg | 6 +-
tests/vty/ok.cfg | 31 +++++++-
tests/vty/ok_empty_parent.cfg | 24 +++++-
tests/vty/ok_ignore_blank.cfg | 15 +++-
tests/vty/ok_ignore_comment.cfg | 9 ++-
tests/vty/ok_indented_root.cfg | 8 +-
tests/vty/ok_more_spaces.cfg | 32 +++++++-
tests/vty/ok_tabs.cfg | 32 +++++++-
tests/vty/ok_tabs_and_spaces.cfg | 32 +++++++-
tests/vty/vty_test.c | 120 +++++++++++++++++++++++++++-
tests/vty/vty_test.ok | 156 +++++++++++++++++++++++++++++++++++++
15 files changed, 556 insertions(+), 73 deletions(-)
hooks/post-receive
--
An utility library for Open Source Mobile Communications
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "The OpenGGSN project".
The branch, master has been updated
via 1a8bc9839a69566e756c691ebd2d676082838c52 (commit)
via 79aa4bd8378748ef1a264b6ae0c64f1eca0ab6df (commit)
via fbb9c7f59a7f112608b59c7692c1fddd1a5e8c23 (commit)
via 3c1cce245e6ed1746c0eacc6208b884871186d3d (commit)
via 93fed3bc510563e7d88cadafa7eada2ae4182213 (commit)
from 00d346092be0b9d948f687efb4b20a0727019b71 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/osmo-ggsn/commit/?id=1a8bc9839a69566e756c691ebd2d67…
commit 1a8bc9839a69566e756c691ebd2d676082838c52
Merge: 79aa4bd fbb9c7f
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 15:20:23 2017 +0000
Merge "sgsnemu: Add --no-tx-gpdu-seq option to suppress transmission of G-PDU sequence numbers"
http://cgit.osmocom.org/osmo-ggsn/commit/?id=79aa4bd8378748ef1a264b6ae0c64f…
commit 79aa4bd8378748ef1a264b6ae0c64f1eca0ab6df
Merge: 3c1cce2 93fed3b
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 15:20:23 2017 +0000
Merge "ggsn: Add per-APN VTY configuration option on G-PDU sequence numbers"
-----------------------------------------------------------------------
Summary of changes:
TODO-RELEASE | 1 +
ggsn/ggsn.c | 3 +++
ggsn/ggsn.h | 2 ++
ggsn/ggsn_vty.c | 26 ++++++++++++++++++++++++++
gtp/gtp.c | 22 ++++++++++++++++------
gtp/pdp.c | 2 ++
gtp/pdp.h | 4 ++++
sgsnemu/cmdline.c | 22 ++++++++++++++++++++++
sgsnemu/cmdline.ggo | 2 +-
sgsnemu/cmdline.h | 6 ++++++
sgsnemu/sgsnemu.c | 10 ++++++++++
11 files changed, 93 insertions(+), 7 deletions(-)
hooks/post-receive
--
The OpenGGSN project
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "The OpenGGSN project".
The branch, laforge/gpdu-seq has been updated
discards 808b4ced0bb64181e18ff47dfc952f30829e5de1 (commit)
discards e21c3e4f5ebfeb33ef24d3af069063983ed5dd08 (commit)
discards 01b25c7389e8000a2ac7b3c019374687552b6b6c (commit)
via fbb9c7f59a7f112608b59c7692c1fddd1a5e8c23 (commit)
via 93fed3bc510563e7d88cadafa7eada2ae4182213 (commit)
via 3c1cce245e6ed1746c0eacc6208b884871186d3d (commit)
via 00d346092be0b9d948f687efb4b20a0727019b71 (commit)
This update added new revisions after undoing existing revisions. That is
to say, the old revision is not a strict subset of the new revision. This
situation occurs when you --force push a change and generate a repository
containing something like this:
* -- * -- B -- O -- O -- O (808b4ced0bb64181e18ff47dfc952f30829e5de1)
\
N -- N -- N (fbb9c7f59a7f112608b59c7692c1fddd1a5e8c23)
When this happens we assume that you've already had alert emails for all
of the O revisions, and so we here report only the revisions in the N
branch from the common base, B.
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
-----------------------------------------------------------------------
Summary of changes:
ggsn/ggsn_vty.c | 2 ++
1 file changed, 2 insertions(+)
hooks/post-receive
--
The OpenGGSN project
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "The OpenGGSN project".
The branch, laforge/sgsnemu-v6 has been updated
discards a6196e932d74355b0761e9372ca7f5491ee4f439 (commit)
discards edebd6794a20cc1ae1cec8efae53de949898534b (commit)
discards 72137b146a089e92a546f0ffb330d7ca98853ff3 (commit)
discards 808b4ced0bb64181e18ff47dfc952f30829e5de1 (commit)
discards e21c3e4f5ebfeb33ef24d3af069063983ed5dd08 (commit)
discards 01b25c7389e8000a2ac7b3c019374687552b6b6c (commit)
via a05e6052a95dccbf63a2a828ffd0e39c662cd2ff (commit)
via 3e4556ba6cfed8f91bfb1832ba10c5c735d650de (commit)
via 485628283372a6d4b4115821d56469f00cae6552 (commit)
via fbb9c7f59a7f112608b59c7692c1fddd1a5e8c23 (commit)
via 93fed3bc510563e7d88cadafa7eada2ae4182213 (commit)
via 3c1cce245e6ed1746c0eacc6208b884871186d3d (commit)
via 00d346092be0b9d948f687efb4b20a0727019b71 (commit)
This update added new revisions after undoing existing revisions. That is
to say, the old revision is not a strict subset of the new revision. This
situation occurs when you --force push a change and generate a repository
containing something like this:
* -- * -- B -- O -- O -- O (a6196e932d74355b0761e9372ca7f5491ee4f439)
\
N -- N -- N (a05e6052a95dccbf63a2a828ffd0e39c662cd2ff)
When this happens we assume that you've already had alert emails for all
of the O revisions, and so we here report only the revisions in the N
branch from the common base, B.
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/osmo-ggsn/commit/?id=a05e6052a95dccbf63a2a828ffd0e3…
commit a05e6052a95dccbf63a2a828ffd0e39c662cd2ff
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 21:54:59 2017 +0800
sgsnemu: Add IPv6 support via tun device and "-t v6 --createif"
The idea is to only implement the GTP-C plane and configure the right
link-local source address on the tun-device and let the regular (Linux)
kernel take care of sending router solicitations and
accepting/processing the related router advertisement. This avoids a
lot of complexity in sgsnemu.
For this to work, you must have /proc/sys/net/conf/$tun/accept_ra set
to either 1 (works only if no IPv6 forwarding/routing configured on your
sgsnemu-running system) or 2 (works even if forwarding/routing is
configured).
Change-Id: I57e4c53ee648e1efecfba3eea592d1129849557c
Closes: OS#2518
http://cgit.osmocom.org/osmo-ggsn/commit/?id=3e4556ba6cfed8f91bfb1832ba10c5…
commit 3e4556ba6cfed8f91bfb1832ba10c5c735d650de
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 18:12:40 2017 +0800
sgsnemu: Allow specification of PDP (EUA) Type IPv4 or IPv6
This just adds the capability to sgsnemu to request a certain PDP
EUA type. It doesn't mean it actually handles anything beyond the
existing IPv4 yet.
Change-Id: I157f9157a7ff2ea56c37a4a902d4706de4c7d35d
http://cgit.osmocom.org/osmo-ggsn/commit/?id=485628283372a6d4b4115821d56469…
commit 485628283372a6d4b4115821d56469f00cae6552
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 17:45:05 2017 +0800
Replace EUA magic numbers for IETF, IPv4 and IPv6 with #defines
Change-Id: I33f65e404217e717bd795e5229c8d9456a7b3739
-----------------------------------------------------------------------
Summary of changes:
ggsn/ggsn_vty.c | 2 ++
1 file changed, 2 insertions(+)
hooks/post-receive
--
The OpenGGSN project
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "The OpenGGSN project".
The branch, master has been updated
via 00d346092be0b9d948f687efb4b20a0727019b71 (commit)
via 3ca419a2ef00bea935fad17278810d48d780baf7 (commit)
via ff438174aab40a07fe0597d3f1d2b12d88090a20 (commit)
from f85fe9720be14acc1038ed400654d8ce336274a7 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/osmo-ggsn/commit/?id=00d346092be0b9d948f687efb4b20a…
commit 00d346092be0b9d948f687efb4b20a0727019b71
Merge: 3ca419a ff43817
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 14:58:50 2017 +0000
Merge "ggsn: Fix double whitespace in writing "ifconfig" lines"
-----------------------------------------------------------------------
Summary of changes:
ggsn/ggsn_vty.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
hooks/post-receive
--
The OpenGGSN project
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "The OpenGGSN project".
The branch, laforge/gpdu-seq has been created
at 808b4ced0bb64181e18ff47dfc952f30829e5de1 (commit)
- Log -----------------------------------------------------------------
-----------------------------------------------------------------------
hooks/post-receive
--
The OpenGGSN project
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "The OpenGGSN project".
The branch, laforge/sgsnemu-v6 has been updated
discards e585641387af4730498a04168d8e90c403efff04 (commit)
discards a35a1f792b4ac73b463f9fcd4d48d40748d85a57 (commit)
discards 0d8dccb7e1911ccd5a93791379c4ecf7458ab3ce (commit)
discards 96a79de85f8ef14023d265970d6597f44eb5a0aa (commit)
discards ab763a4cda30e5b298eb25a73c84f3488fc39f42 (commit)
discards 6988e48b3f12eadef8cf817b0f85d63fe61834af (commit)
via a6196e932d74355b0761e9372ca7f5491ee4f439 (commit)
via edebd6794a20cc1ae1cec8efae53de949898534b (commit)
via 72137b146a089e92a546f0ffb330d7ca98853ff3 (commit)
via 808b4ced0bb64181e18ff47dfc952f30829e5de1 (commit)
via e21c3e4f5ebfeb33ef24d3af069063983ed5dd08 (commit)
via 01b25c7389e8000a2ac7b3c019374687552b6b6c (commit)
via ff438174aab40a07fe0597d3f1d2b12d88090a20 (commit)
via 3ca419a2ef00bea935fad17278810d48d780baf7 (commit)
This update added new revisions after undoing existing revisions. That is
to say, the old revision is not a strict subset of the new revision. This
situation occurs when you --force push a change and generate a repository
containing something like this:
* -- * -- B -- O -- O -- O (e585641387af4730498a04168d8e90c403efff04)
\
N -- N -- N (a6196e932d74355b0761e9372ca7f5491ee4f439)
When this happens we assume that you've already had alert emails for all
of the O revisions, and so we here report only the revisions in the N
branch from the common base, B.
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/osmo-ggsn/commit/?id=a6196e932d74355b0761e9372ca7f5…
commit a6196e932d74355b0761e9372ca7f5491ee4f439
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 21:54:59 2017 +0800
sgsnemu: Add IPv6 support via tun device and "-t v6 --createif"
The idea is to only implement the GTP-C plane and configure the right
link-local source address on the tun-device and let the regular (Linux)
kernel take care of sending router solicitations and
accepting/processing the related router advertisement. This avoids a
lot of complexity in sgsnemu.
For this to work, you must have /proc/sys/net/conf/$tun/accept_ra set
to either 1 (works only if no IPv6 forwarding/routing configured on your
sgsnemu-running system) or 2 (works even if forwarding/routing is
configured).
Change-Id: I57e4c53ee648e1efecfba3eea592d1129849557c
Closes: OS#2518
http://cgit.osmocom.org/osmo-ggsn/commit/?id=edebd6794a20cc1ae1cec8efae53de…
commit edebd6794a20cc1ae1cec8efae53de949898534b
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 18:12:40 2017 +0800
sgsnemu: Allow specification of PDP (EUA) Type IPv4 or IPv6
This just adds the capability to sgsnemu to request a certain PDP
EUA type. It doesn't mean it actually handles anything beyond the
existing IPv4 yet.
Change-Id: I157f9157a7ff2ea56c37a4a902d4706de4c7d35d
http://cgit.osmocom.org/osmo-ggsn/commit/?id=72137b146a089e92a546f0ffb330d7…
commit 72137b146a089e92a546f0ffb330d7ca98853ff3
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 17:45:05 2017 +0800
Replace EUA magic numbers for IETF, IPv4 and IPv6 with #defines
Change-Id: I33f65e404217e717bd795e5229c8d9456a7b3739
-----------------------------------------------------------------------
Summary of changes:
ggsn/ggsn_vty.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
hooks/post-receive
--
The OpenGGSN project
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "The OpenGGSN project".
The branch, laforge/sgsnemu-v6 has been updated
discards b31a61b280858fbedf83a53a24521c5c12ee22d6 (commit)
discards 5a1375ecb84244467f59afb46c14bcafda16eedd (commit)
via e585641387af4730498a04168d8e90c403efff04 (commit)
This update added new revisions after undoing existing revisions. That is
to say, the old revision is not a strict subset of the new revision. This
situation occurs when you --force push a change and generate a repository
containing something like this:
* -- * -- B -- O -- O -- O (b31a61b280858fbedf83a53a24521c5c12ee22d6)
\
N -- N -- N (e585641387af4730498a04168d8e90c403efff04)
When this happens we assume that you've already had alert emails for all
of the O revisions, and so we here report only the revisions in the N
branch from the common base, B.
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/osmo-ggsn/commit/?id=e585641387af4730498a04168d8e90…
commit e585641387af4730498a04168d8e90c403efff04
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 21:54:59 2017 +0800
sgsnemu: Add IPv6 supprort via tun device and "-t v6 --creatif"
The idea is to only implement the GTP-C plane and configure the right
link-local source address on the tun-device and let the regular (Linux)
kernel take care of sending router solicitations and
accepting/processing the related router advertisement. This avoids a
lot of complexity in sgsnemu.
For this to work, you must have /proc/sys/net/conf/$tun/accept_ra set
to either 1 (works only if no IPv6 forwarding/routing configured on your
sgsnemu-running system) or 2 (works even if forwarding/routing is
configured).
Change-Id: I57e4c53ee648e1efecfba3eea592d1129849557c
Closes: OS#2518
-----------------------------------------------------------------------
Summary of changes:
ggsn/Makefile.am | 2 +-
{lib => ggsn}/checksum.c | 0
{lib => ggsn}/checksum.h | 0
ggsn/ggsn.c | 2 +-
{lib => ggsn}/icmpv6.c | 46 ----------------------------------
{lib => ggsn}/icmpv6.h | 3 ---
lib/Makefile.am | 5 ++--
sgsnemu/sgsnemu.c | 65 ++++++++++++++++++++++++++++++++++++++++--------
8 files changed, 58 insertions(+), 65 deletions(-)
rename {lib => ggsn}/checksum.c (100%)
rename {lib => ggsn}/checksum.h (100%)
rename {lib => ggsn}/icmpv6.c (82%)
rename {lib => ggsn}/icmpv6.h (67%)
hooks/post-receive
--
The OpenGGSN project
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "The OpenGGSN project".
The branch, laforge/sgsnemu-v6 has been created
at b31a61b280858fbedf83a53a24521c5c12ee22d6 (commit)
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/osmo-ggsn/commit/?id=b31a61b280858fbedf83a53a24521c…
commit b31a61b280858fbedf83a53a24521c5c12ee22d6
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 18:32:11 2017 +0800
lib/icmpv6: Add icmpv6_construct_rs() to construct router solicitation
Change-Id: Ifdd315ce6b0bfa5f261fd342a3d78c0ec6000f55
http://cgit.osmocom.org/osmo-ggsn/commit/?id=5a1375ecb84244467f59afb46c14bc…
commit 5a1375ecb84244467f59afb46c14bcafda16eedd
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 18:15:44 2017 +0800
move checkxum.[ch] and icmpv6.[ch] from ggsn/ to lib/ directory
Having related code in the lib/ directory and linked into libmisc
will allow us to use it from sgsnemu, too.
Change-Id: I6d3a6e9610204eed44969d1fdc3ddcdd902488a4
http://cgit.osmocom.org/osmo-ggsn/commit/?id=a35a1f792b4ac73b463f9fcd4d48d4…
commit a35a1f792b4ac73b463f9fcd4d48d40748d85a57
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 18:12:40 2017 +0800
sgsnemu: Allow specification of PDP (EUA) Type IPv4 or IPv6
This just adds the capability to sgsnemu to request a certain PDP
EUA type. It doesn't mean it actually handles anything beyond the
existing IPv4 yet.
Change-Id: I157f9157a7ff2ea56c37a4a902d4706de4c7d35d
http://cgit.osmocom.org/osmo-ggsn/commit/?id=0d8dccb7e1911ccd5a93791379c4ec…
commit 0d8dccb7e1911ccd5a93791379c4ecf7458ab3ce
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 17:45:05 2017 +0800
Replace EUA magic nmbers for IETF, IPv4 and IPv6 with #defines
Change-Id: I33f65e404217e717bd795e5229c8d9456a7b3739
http://cgit.osmocom.org/osmo-ggsn/commit/?id=96a79de85f8ef14023d265970d6597…
commit 96a79de85f8ef14023d265970d6597f44eb5a0aa
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 11:50:20 2017 +0800
sgsnemu: Add --no-tx-gpdu-seq option to suppress transmission of G-PDU sequence numbers
Related: OS#2519
Change-Id: Idc650d896f0f72329090b56a37d9c16359294860
http://cgit.osmocom.org/osmo-ggsn/commit/?id=ab763a4cda30e5b298eb25a73c84f3…
commit ab763a4cda30e5b298eb25a73c84f3488fc39f42
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 11:43:17 2017 +0800
ggsn: Add per-APN VTY configuration option on G-PDU sequence numbers
This per-APN vty option determines if we are transmitting GTP sequence
numbers in downlink G-PDU messages. This behavior is optional as per
GTP spec. The default behavior is "true", like before this change.
Related: OS#2519
Change-Id: Ibf0de261f83951309b01b4feae998b6656c77664
http://cgit.osmocom.org/osmo-ggsn/commit/?id=6988e48b3f12eadef8cf817b0f85d6…
commit 6988e48b3f12eadef8cf817b0f85d63fe61834af
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 16:40:12 2017 +0800
libgtp: Allow each PDP context to specify if it transmits G-PDU sequence numbers
GTP sequence numbers on GTP-U are optional for G-PDU type messages (i.e.
user-ip messages). Let's allow the user to specify this behavior by
a new pdu_t.tx_gpdu_seq flag. The flag is enabled by default to stay
compatible with the prior behaviour.
Related: OS#2519
Change-Id: Icf22a2ddd5c4a968ef5bda7c202b921d93fb49e6
-----------------------------------------------------------------------
hooks/post-receive
--
The OpenGGSN project
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "The OpenGGSN project".
The branch, master has been updated
via f85fe9720be14acc1038ed400654d8ce336274a7 (commit)
via fed598f41d85cef578925a4be6ce96a2c6afd3b3 (commit)
via 471e349ecc46e2bd89d69d6e46a38cd5136bd401 (commit)
from 7e1175f6d8d96f5c45d3d880945895698d02d5a0 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/osmo-ggsn/commit/?id=f85fe9720be14acc1038ed400654d8…
commit f85fe9720be14acc1038ed400654d8ce336274a7
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 20:00:34 2017 +0800
ICMPv6: Send router advertisement from own link-local address
I'm not quite sure how I ended up doing this, but for some strange
reason the code before this commit is sending the ICMPv6 Router
Advertisements from some weird non-standard source address. This is
a violation of RFC4861 which clearly states that the source address
of router advertisements "MUST be the link-local address assigned to the
interface from which this message is sent."
Change-Id: Ib444af70fc8f0b433d371281601fd5a37b29039e
http://cgit.osmocom.org/osmo-ggsn/commit/?id=fed598f41d85cef578925a4be6ce96…
commit fed598f41d85cef578925a4be6ce96a2c6afd3b3
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 16:39:22 2017 +0800
gtp: Avoid magic numbers when operating on GTP header flags
Let's introduce a couple of #defines that make the code much more
readable.
Change-Id: I3635d679fd54507274b46e99a02bdbbe41d7684e
http://cgit.osmocom.org/osmo-ggsn/commit/?id=471e349ecc46e2bd89d69d6e46a38c…
commit 471e349ecc46e2bd89d69d6e46a38cd5136bd401
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 16:12:39 2017 +0800
libgtp: Avoid extra memcpy() in gtp_data_req() by using sendmsg()
Adresses two "TODO Should be avoided" comments about an extra memcpy()
before sendto() that can be replaced by a single sendmsg() call with an
iovec array: 1 record for the GTP header + 1 record for the user payload.
Change-Id: Ie332a6b15972330fcf540753898eb84ecb84fe24
-----------------------------------------------------------------------
Summary of changes:
ggsn/ggsn.c | 17 ++++++++-
ggsn/ggsn.h | 3 ++
ggsn/icmpv6.c | 12 +++----
ggsn/icmpv6.h | 3 +-
gtp/gtp.c | 108 ++++++++++++++++++++++++++++------------------------------
gtp/gtp.h | 7 ++++
lib/tun.c | 32 +++++++++++++++++
lib/tun.h | 2 ++
8 files changed, 119 insertions(+), 65 deletions(-)
hooks/post-receive
--
The OpenGGSN project
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "The OpenGGSN project".
The branch, master has been updated
via 6045efb642918ac43056ca6a40cda2fe2e6db08d (commit)
via 078bc097fca2f3482da8fd2c25d84d9275eaabab (commit)
via 3cce289e4bb5891cd16e95e2d1b9e9660bdde291 (commit)
via b2a9aae35a8595bcd8b6986b0016f74ddfbc5fe9 (commit)
via 95234821939685354489d8e127e9946c85233074 (commit)
via 74aa8b701c57576dc512897f5d3f75ab846e83ef (commit)
via 15ed7921541a2a99a146587b6e5c07c5ff6dd316 (commit)
from 01628985ec53f4d16a88bf9bcb70d23445e0b5bb (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/openggsn/commit/?id=6045efb642918ac43056ca6a40cda2f…
commit 6045efb642918ac43056ca6a40cda2fe2e6db08d
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 10:53:53 2017 +0800
sgsnemu: Fix gengetopt package name
gengetopt by default picks the program name from PACKAGE (autotools),
which is openggsn and is obviously wrong in case of sgsnemu.
After this patch, "sgsnemu --help" no longer shows "openggsn" but
"sgsnemu" at the top of the help text.
Change-Id: Ifabc2435a503ef71aa5a002ca46833f329068b37
http://cgit.osmocom.org/openggsn/commit/?id=078bc097fca2f3482da8fd2c25d84d9…
commit 078bc097fca2f3482da8fd2c25d84d9275eaabab
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 10:23:24 2017 +0800
sgsnemu: Re-generate cmdline.[ch] using gengetopt
This will replace the manual additions to cmdline.[ch] with
auto-generated code from gengetopt. We need to fix-up the RAT Type in
sgsnemu.c as the manually-added code diverged from what gengetopt
generates.
Change-Id: Ia687e13d5cec1655a57078a767d2123aa022842c
http://cgit.osmocom.org/openggsn/commit/?id=3cce289e4bb5891cd16e95e2d1b9e96…
commit 3cce289e4bb5891cd16e95e2d1b9e9660bdde291
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 08:56:14 2017 +0800
sgsnemu: Fix up gengetopt file for --norecovery
In commit 3a4c67b4bf0067c4949a60bc750d01e0576c5e08 we introduced the
--norecovery command line option, but this was apparently done by
manually editing the C source code rather than adding it to the .ggo
and letting gengetopt do its magic. Let's fix this up.
Change-Id: I1698280a699b17cea65651c3736ef149aba7e432
http://cgit.osmocom.org/openggsn/commit/?id=b2a9aae35a8595bcd8b6986b0016f74…
commit b2a9aae35a8595bcd8b6986b0016f74ddfbc5fe9
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 08:53:58 2017 +0800
sgsnemu: Fix up gengetopt file for RAI
In commit 41af5691ef08fb70e2c65aba03c8b9e6c20983a6 we introduced the
--rai command line options, but this was apparently done by
manually editing the C source code rather than adding it to the .ggo
and letting gengetopt do its magic. Let's fix this up.
Change-Id: Iaab404c3bcfc0c3943764f6616763f4f407d5644
http://cgit.osmocom.org/openggsn/commit/?id=95234821939685354489d8e127e9946…
commit 95234821939685354489d8e127e9946c85233074
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 08:51:02 2017 +0800
sgsnemu: Fix up gengetopt file for rattype, userloc, mstz, imeisv
In commit 944dce3e66f3bc5b74f24dfbbee2370a231a39a9 we introduced various
command line options, but this was apparently done by manually editing
the C source code rather than adding it to the .ggo and letting
gengetopt do its magic. Let's fix this up.
Change-Id: Ib8e7ef1cad5fc4423a1a4af628950aa93a4e073a
http://cgit.osmocom.org/openggsn/commit/?id=74aa8b701c57576dc512897f5d3f75a…
commit 74aa8b701c57576dc512897f5d3f75ab846e83ef
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 08:41:14 2017 +0800
sgsnemu: Fix up gengetopt file for QoS Extensions of 24.008
In commit 11a398fbc3ad9b655d8ba947bea7012f7ce81604 we introduced the
--qose{1,2,3,4} command line options, but this was apparently done by
manually editing the C source code rather than adding it to the .ggo
and letting gengetopt do its magic. Let's fix this up.
Change-Id: I4cd827a96ac17f6eb9f824342f195727426d0e20
http://cgit.osmocom.org/openggsn/commit/?id=15ed7921541a2a99a146587b6e5c07c…
commit 15ed7921541a2a99a146587b6e5c07c5ff6dd316
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 08:34:36 2017 +0800
sgsnemu/cmdline.ggo: Remove 'unsigned' which is no longer supported
It seems like modern gengetopt no longer supports 'unsigned int'
argument types, and we need to use 'int' instead. tested with 2.22.6
Change-Id: I34ca86cb3cc482400a7c4b3bf77c8668aaef562e
-----------------------------------------------------------------------
Summary of changes:
sgsnemu/cmdline.c | 2203 ++++++++++++++++++++++-----------------------------
sgsnemu/cmdline.ggo | 26 +-
sgsnemu/cmdline.h | 605 ++++++++++----
sgsnemu/sgsnemu.c | 6 +-
4 files changed, 1433 insertions(+), 1407 deletions(-)
hooks/post-receive
--
The OpenGGSN project
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "The OpenGGSN project".
The branch, master has been updated
via 7e1175f6d8d96f5c45d3d880945895698d02d5a0 (commit)
from f621498129023a17f8023d1f865cfe66ba9c235a (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/osmo-ggsn/commit/?id=7e1175f6d8d96f5c45d3d880945895…
commit 7e1175f6d8d96f5c45d3d880945895698d02d5a0
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 10:53:53 2017 +0800
sgsnemu: Fix gengetopt package name
gengetopt by default picks the program name from PACKAGE (autotools),
which is osmo-ggsn and is obviously wrong in case of sgsnemu.
After this patch, "sgsnemu --help" no longer shows "osmo-ggsn" but
"sgsnemu" at the top of the help text.
Change-Id: Ifabc2435a503ef71aa5a002ca46833f329068b37
-----------------------------------------------------------------------
Summary of changes:
sgsnemu/cmdline.c | 3 +--
sgsnemu/cmdline.ggo | 2 ++
sgsnemu/cmdline.h | 8 ++------
3 files changed, 5 insertions(+), 8 deletions(-)
hooks/post-receive
--
The OpenGGSN project
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "The OpenGGSN project".
The branch, master has been updated
via f621498129023a17f8023d1f865cfe66ba9c235a (commit)
via 7c20148e396928f587a3719e092a8d1486664773 (commit)
via b6fc227763f26cec76be0da6cc402dce447abc91 (commit)
via 1d94585f96ff684240013c21f00a3bf0e9a5d700 (commit)
via 05ac095006691dc671c1669e21bebb872ef5a658 (commit)
via 73d28c9dda6b5d523977df65c5aa03c50456ccda (commit)
from ea70f3619acbba7dba0e859f7eb52bdd53d4c17c (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/osmo-ggsn/commit/?id=f621498129023a17f8023d1f865cfe…
commit f621498129023a17f8023d1f865cfe66ba9c235a
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 10:23:24 2017 +0800
sgsnemu: Re-generate cmdline.[ch] using gengetopt
This will replace the manual additions to cmdline.[ch] with
auto-generated code from gengetopt. We need to fix-up the RAT Type in
sgsnemu.c as the manually-added code diverged from what gengetopt
generates.
Change-Id: Ia687e13d5cec1655a57078a767d2123aa022842c
http://cgit.osmocom.org/osmo-ggsn/commit/?id=7c20148e396928f587a3719e092a8d…
commit 7c20148e396928f587a3719e092a8d1486664773
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 08:56:14 2017 +0800
sgsnemu: Fix up gengetopt file for --norecovery
In commit 3a4c67b4bf0067c4949a60bc750d01e0576c5e08 we introduced the
--norecovery command line option, but this was apparently done by
manually editing the C source code rather than adding it to the .ggo
and letting gengetopt do its magic. Let's fix this up.
Change-Id: I1698280a699b17cea65651c3736ef149aba7e432
http://cgit.osmocom.org/osmo-ggsn/commit/?id=b6fc227763f26cec76be0da6cc402d…
commit b6fc227763f26cec76be0da6cc402dce447abc91
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 08:53:58 2017 +0800
sgsnemu: Fix up gengetopt file for RAI
In commit 41af5691ef08fb70e2c65aba03c8b9e6c20983a6 we introduced the
--rai command line options, but this was apparently done by
manually editing the C source code rather than adding it to the .ggo
and letting gengetopt do its magic. Let's fix this up.
Change-Id: Iaab404c3bcfc0c3943764f6616763f4f407d5644
http://cgit.osmocom.org/osmo-ggsn/commit/?id=1d94585f96ff684240013c21f00a3b…
commit 1d94585f96ff684240013c21f00a3bf0e9a5d700
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 08:51:02 2017 +0800
sgsnemu: Fix up gengetopt file for rattype, userloc, mstz, imeisv
In commit 944dce3e66f3bc5b74f24dfbbee2370a231a39a9 we introduced various
command line options, but this was apparently done by manually editing
the C source code rather than adding it to the .ggo and letting
gengetopt do its magic. Let's fix this up.
Change-Id: Ib8e7ef1cad5fc4423a1a4af628950aa93a4e073a
http://cgit.osmocom.org/osmo-ggsn/commit/?id=05ac095006691dc671c1669e21bebb…
commit 05ac095006691dc671c1669e21bebb872ef5a658
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 08:41:14 2017 +0800
sgsnemu: Fix up gengetopt file for QoS Extensions of 24.008
In commit 11a398fbc3ad9b655d8ba947bea7012f7ce81604 we introduced the
--qose{1,2,3,4} command line options, but this was apparently done by
manually editing the C source code rather than adding it to the .ggo
and letting gengetopt do its magic. Let's fix this up.
Change-Id: I4cd827a96ac17f6eb9f824342f195727426d0e20
http://cgit.osmocom.org/osmo-ggsn/commit/?id=73d28c9dda6b5d523977df65c5aa03…
commit 73d28c9dda6b5d523977df65c5aa03c50456ccda
Author: Harald Welte <laforge(a)gnumonks.org>
Date: Sun Sep 24 08:34:36 2017 +0800
sgsnemu/cmdline.ggo: Remove 'unsigned' which is no longer supported
It seems like modern gengetopt no longer supports 'unsigned int'
argument types, and we need to use 'int' instead. tested with 2.22.6
Change-Id: I34ca86cb3cc482400a7c4b3bf77c8668aaef562e
-----------------------------------------------------------------------
Summary of changes:
sgsnemu/cmdline.c | 2200 ++++++++++++++++++++++-----------------------------
sgsnemu/cmdline.ggo | 24 +-
sgsnemu/cmdline.h | 607 ++++++++++----
sgsnemu/sgsnemu.c | 6 +-
4 files changed, 1433 insertions(+), 1404 deletions(-)
hooks/post-receive
--
The OpenGGSN project
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "GNURadio block for spectrum visualization using GPU".
The branch, gr38-qt5 has been created
at 0f397be7ba6d570a3f70240b11e45ecd23d6794c (commit)
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/gr-fosphor/commit/?id=0f397be7ba6d570a3f70240b11e45…
commit 0f397be7ba6d570a3f70240b11e45ecd23d6794c
Author: Sylvain Munaut <tnt(a)246tNt.com>
Date: Sat Sep 23 22:23:25 2017 +0200
[HACK] ... not working ...
http://cgit.osmocom.org/gr-fosphor/commit/?id=9e4389457480bdb2e04466a927819…
commit 9e4389457480bdb2e04466a927819d8eb9cc14c2
Author: Sylvain Munaut <tnt(a)246tNt.com>
Date: Thu Sep 14 16:56:57 2017 -0700
gr-fosphor: Switch to Qt5
Signed-off-by: Sylvain Munaut <tnt(a)246tNt.com>
http://cgit.osmocom.org/gr-fosphor/commit/?id=b93c98cafbdb959e082f3ab3481c7…
commit b93c98cafbdb959e082f3ab3481c7b0c628eede0
Author: Sylvain Munaut <tnt(a)246tNt.com>
Date: Thu Sep 14 16:56:05 2017 -0700
gr-fosphor: Move to GNURadio 3.8
Signed-off-by: Sylvain Munaut <tnt(a)246tNt.com>
http://cgit.osmocom.org/gr-fosphor/commit/?id=f5f1aadaec5c1904cc951b939f98b…
commit f5f1aadaec5c1904cc951b939f98b379d67423a5
Author: Sylvain Munaut <tnt(a)246tNt.com>
Date: Thu Sep 14 16:50:14 2017 -0700
gr-fopshor: Remove WX support
This doesn't exist anymore in 3.8
Signed-off-by: Sylvain Munaut <tnt(a)246tNt.com>
-----------------------------------------------------------------------
hooks/post-receive
--
GNURadio block for spectrum visualization using GPU
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "An utility library for Open Source Mobile Communications".
The branch, master has been updated
via 657c5b6cadcef470c7ff9bffed3caab227026e6a (commit)
via 0b723f6a6cdc4171ee67ddd8d8c1bb812fb4cf06 (commit)
from b022c867e86333ceaad9027e2e7ee621ab3891e5 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/libosmocore/commit/?id=657c5b6cadcef470c7ff9bffed3c…
commit 657c5b6cadcef470c7ff9bffed3caab227026e6a
Author: Neels Hofmeyr <neels(a)hofmeyr.de>
Date: Mon Sep 18 16:42:06 2017 +0200
vty: derive node name from prompt, use as XML ids
The 'show online-help' produces XML output with <node id="..."> ids. We
reference those from the osmo-gsm-manuals.
Instead of numeric IDs coming from internal code, rather use a human-readable
node ID -- referencing id='config-msc' is much easier than referencing id='23'.
Add a char name[] to struct cmd_node, to hold this name. This may be provided
upon struct definition.
Since callers of the VTY API so far don't have a name yet, we would need to add
names everywhere to get meaningful node IDs. There is a way to get node ID
names without touching dependent code:
My first idea was to find out which command entered the node, i.e. command
'msc' enters the MSC_NODE. But it is impossible to derive which command entered
which node from data structs, it's hidden in the vty command definition.
But in fact all (TM) known API callers indeed provide a prompt string that
contains a logical and human readable string name. Thus, if the name is unset
in the struct, parse the prompt string and strip all "weird" characters to
obtain a node name from that. We can still set names later on, but for now will
have meaningful node IDs (e.g. 'config-msc' from '%s(config-msc)# ') without
touching any dependent code.
When VTY nodes get identical node names, which is quite possible, the XML
export de-dups these by appending _2, _3,... suffixes. The first occurence is
called e.g. 'name', the second 'name_2', then 'name_3', and so forth.
If a node has no name (even after parsing the prompt), it will be named merely
by the suffix. The first empty node will become id='_1', then '_2', '_3', and
so forth. This happens for nodes like VIEW_NODE or AUTH_NODE.
If this is merged, we need to adjust the references in osmo-gsm-manuals.git.
This can happen in our own time though, because we manually create the vty
reference xml and copy it to the osmo-gsm-manuals.git and then update the
references from the vty_additions.xml. This anyway has to happen because
currently the references tend to be hopelessly out of sync anyway, placing
comments at wildly unrelated VTY commands.
Change-Id: I8fa555570268b231c5e01727c661da92fad265de
http://cgit.osmocom.org/libosmocore/commit/?id=0b723f6a6cdc4171ee67ddd8d8c1…
commit 0b723f6a6cdc4171ee67ddd8d8c1bb812fb4cf06
Author: Neels Hofmeyr <neels(a)hofmeyr.de>
Date: Mon Sep 18 17:10:36 2017 +0200
vty: use internal node id for xml ids
The 'show online-help' produces XML output with <node id="..."> ids. We
reference those from the osmo-gsm-manuals, but until now, these ids fall out of
sync when the amount of VTY nodes changes.
Change these ids to use the internal node ID constant (as in enum bsc_vty_node)
instead of a simple counter.
If this is merged, we need to adjust the references in osmo-gsm-manuals.git.
Change-Id: Ib07fb9d9106e19f5be6539493e82b5d5991f8bc2
-----------------------------------------------------------------------
Summary of changes:
include/osmocom/vty/command.h | 5 +++++
src/vty/command.c | 47 ++++++++++++++++++++++++++++++++++++++++++-
2 files changed, 51 insertions(+), 1 deletion(-)
hooks/post-receive
--
An utility library for Open Source Mobile Communications
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "MNCC <-> SIP bridge".
The branch, master has been updated
via 535df15bc5a2fc0119e6f3c9d2eeec20944aabfa (commit)
from b6032727870ab2b98372b697d91f7256da4f32b3 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/osmo-sip-connector/commit/?id=535df15bc5a2fc0119e6f…
commit 535df15bc5a2fc0119e6f3c9d2eeec20944aabfa
Author: Neels Hofmeyr <neels(a)hofmeyr.de>
Date: Tue Sep 19 03:29:48 2017 +0200
vty: install default commands for SIP,MNCC,APP_NODE
Change-Id: Iee51881cc07d56209647fb4f505f8f6be6b885f0
-----------------------------------------------------------------------
Summary of changes:
src/vty.c | 3 +++
1 file changed, 3 insertions(+)
hooks/post-receive
--
MNCC <-> SIP bridge
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Osmocom BTS-side code (Abis, scheduling, ...)".
The branch, master has been updated
via 9605b695fab690682024128cd580b288906fbb24 (commit)
from ae134f896a77eb5b79c81601cabd821d5b993358 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/osmo-bts/commit/?id=9605b695fab690682024128cd580b28…
commit 9605b695fab690682024128cd580b288906fbb24
Author: Neels Hofmeyr <neels(a)hofmeyr.de>
Date: Tue Sep 19 03:27:29 2017 +0200
vty: mgr: sysmobts, lc15: install default commands for ACT_NORM_NODE
Change-Id: Ia1b3d5e010c5b6ea8e655b79d9b36b08cd1ef4c4
-----------------------------------------------------------------------
Summary of changes:
src/osmo-bts-litecell15/misc/lc15bts_mgr_vty.c | 1 +
src/osmo-bts-sysmo/misc/sysmobts_mgr_vty.c | 1 +
2 files changed, 2 insertions(+)
hooks/post-receive
--
Osmocom BTS-side code (Abis, scheduling, ...)
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Manuals for Osmocom GSM components".
The branch, master has been updated
via 0e3e4c217add2744307b81d3e8c715c3ddc2c119 (commit)
via 60ccbe55c534c533779d816187d838339cfdce86 (commit)
from 56f77a3b6436eab71c42fd0ad3233a15148eafed (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
-----------------------------------------------------------------------
Summary of changes:
INSTALL.txt | 24 +++++++++++++++++++++++-
build/Makefile.asciidoc.inc | 5 +----
2 files changed, 24 insertions(+), 5 deletions(-)
hooks/post-receive
--
Manuals for Osmocom GSM components
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "An utility library for Open Source Mobile Communications".
The branch, master has been updated
via b022c867e86333ceaad9027e2e7ee621ab3891e5 (commit)
via 00b5ed3d921f2f39e60ed372809c33b8bce78ad8 (commit)
from 430636328c2fbd9fffc0eac5114462c200b7f2cb (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/libosmocore/commit/?id=b022c867e86333ceaad9027e2e7e…
commit b022c867e86333ceaad9027e2e7ee621ab3891e5
Author: Neels Hofmeyr <neels(a)hofmeyr.de>
Date: Wed Sep 20 01:49:11 2017 +0200
vty_test: add artificial node levels for better testing
In vty_test, add three levels of parent nodes (level1, level2, level3) with
each having a leaf child (child1, child2, child3).
Use these to enhance the vty_test cfg files and test more diverse situations.
The current VTY code expects a go_parent_cb() to be present, otherwise it will
bump right back to the CONFIG_NODE, which will not work with more than one node
level below the CONFIG_NODE. Hence provide a minimal go_parent_cb().
Change-Id: Ib9bcf58b655fbd85e196f363fb7d8305d7dfc997
http://cgit.osmocom.org/libosmocore/commit/?id=00b5ed3d921f2f39e60ed372809c…
commit 00b5ed3d921f2f39e60ed372809c33b8bce78ad8
Author: Neels Hofmeyr <neels(a)hofmeyr.de>
Date: Wed Sep 20 00:46:03 2017 +0200
comment: describe indent_cmp()
Change-Id: Ia58c16d995f6751bdd69defe8a46665aee163f3d
-----------------------------------------------------------------------
Summary of changes:
src/vty/command.c | 4 +
tests/vty/fail_not_de-indented.cfg | 6 +-
tests/vty/fail_tabs_and_spaces.cfg | 8 +-
tests/vty/fail_too_much_indent.cfg | 6 +-
tests/vty/ok.cfg | 31 +++++++-
tests/vty/ok_empty_parent.cfg | 24 +++++-
tests/vty/ok_ignore_blank.cfg | 15 +++-
tests/vty/ok_ignore_comment.cfg | 9 ++-
tests/vty/ok_indented_root.cfg | 8 +-
tests/vty/ok_more_spaces.cfg | 32 +++++++-
tests/vty/ok_tabs.cfg | 32 +++++++-
tests/vty/ok_tabs_and_spaces.cfg | 32 +++++++-
tests/vty/vty_test.c | 120 +++++++++++++++++++++++++++-
tests/vty/vty_test.ok | 156 +++++++++++++++++++++++++++++++++++++
14 files changed, 444 insertions(+), 39 deletions(-)
hooks/post-receive
--
An utility library for Open Source Mobile Communications
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Osmocom TETRA PHY and MAC implementation".
The branch, master has been updated
via cb4bd6d45f69aa8cf5991b48df48affad25456f7 (commit)
from 4f3adac31f51f5cd6293779cb7931747bde55230 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/osmo-tetra/commit/?id=cb4bd6d45f69aa8cf5991b48df48a…
commit cb4bd6d45f69aa8cf5991b48df48affad25456f7
Author: André Boddenberg <dr.blobb(a)gmail.com>
Date: Tue Sep 19 13:20:01 2017 +0200
Introduce contrib/jenkins.sh to align with other projects
This change will make jenkins' inline scripts obsolete,
so build testing and gerrit verification jobs [1][2] simply invoke:
$ ./contrib/jenkins.sh
[1] https://jenkins.osmocom.org/jenkins/view/OsmoTETRA/job/OsmoTETRA/
[2] https://jenkins.osmocom.org/jenkins/view/Jenkins-Gerrit/job/OsmoTETRA-gerri…
Change-Id: I517e1be8b5680c3cc274fd5ad13ac7c920154e7f
-----------------------------------------------------------------------
Summary of changes:
contrib/jenkins.sh | 15 +++++++++++++++
1 file changed, 15 insertions(+)
create mode 100755 contrib/jenkins.sh
hooks/post-receive
--
Osmocom TETRA PHY and MAC implementation
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "An utility library for Open Source Mobile Communications".
The branch, master has been updated
via 430636328c2fbd9fffc0eac5114462c200b7f2cb (commit)
from 4a31ffa2f0097d96201f80305a0495c57552f0ad (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/libosmocore/commit/?id=430636328c2fbd9fffc0eac51144…
commit 430636328c2fbd9fffc0eac5114462c200b7f2cb
Author: Neels Hofmeyr <neels(a)hofmeyr.de>
Date: Tue Sep 19 23:54:01 2017 +0200
fix vty regression: empty parent node
The recent exit-by-indent patch breaks a VTY case where a node is entered but
directly followed by a sibling or ancestor without listing any child nodes.
Regression introduced by I24cbb3f6de111f2d31110c3c484c066f1153aac9.
An example is a common usage in osmo-bts, where 'phy N' / 'instance N' is a
parent node that is commonly left empty:
phy 0
instance 0
bts 0
band 1800
Before this patch, this case produces the error:
There is no such command.
Error occurred during reading the below line:
bts 0
Fix indentation parsing logic in command.c to accomodate this case.
Add a unit test for empty parent node.
Change-Id: Ia0880a17ae55accb092ae8585cc3a1bec9986891
-----------------------------------------------------------------------
Summary of changes:
src/vty/command.c | 39 +++++++++++++++++++++++++------
tests/Makefile.am | 1 +
tests/vty/{ok.cfg => ok_empty_parent.cfg} | 1 -
tests/vty/vty_test.c | 1 +
tests/vty/vty_test.ok | 2 ++
5 files changed, 36 insertions(+), 8 deletions(-)
copy tests/vty/{ok.cfg => ok_empty_parent.cfg} (66%)
hooks/post-receive
--
An utility library for Open Source Mobile Communications