March 2023 - gerrit-log - lists.osmocom.org

[S] Change in osmo-pcu[master]: tbf: Increase log level if polling requested in wrong TS

by pespin

pespin has submitted this change. ( https://gerrit.osmocom.org/c/osmo-pcu/+/31729 ) Change subject: tbf: Increase log level if polling requested in wrong TS ...................................................................... tbf: Increase log level if polling requested in wrong TS Change-Id: I641bddcb4027ecc9cc1ec66d4d6b9b483c94c617 --- M src/tbf.cpp 1 file changed, 10 insertions(+), 1 deletion(-) Approvals: Jenkins Builder: Verified fixeria: Looks good to me, but someone else must approve osmith: Looks good to me, approved diff --git a/src/tbf.cpp b/src/tbf.cpp index 9e03089..9648c71 100644 --- a/src/tbf.cpp +++ b/src/tbf.cpp @@ -818,7 +818,7 @@ if (!tbf_is_control_ts(tbf, pdch)) { char buf[128]; - LOGPTBF(tbf, LOGL_DEBUG, "Polling cannot be " + LOGPTBF(tbf, LOGL_NOTICE, "Polling cannot be " "scheduled in this TS %s (control TS %s)\n", pdch_name(pdch), tbf->control_ts ? pdch_name_buf(tbf->control_ts, buf, sizeof(buf)) : "none"); -- To view, visit https://gerrit.osmocom.org/c/osmo-pcu/+/31729 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-pcu Gerrit-Branch: master Gerrit-Change-Id: I641bddcb4027ecc9cc1ec66d4d6b9b483c94c617 Gerrit-Change-Number: 31729 Gerrit-PatchSet: 1 Gerrit-Owner: pespin <pespin(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: osmith <osmith(a)sysmocom.de> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: merged

2 years, 4 months

1
0
0 0

[S] Change in osmo-pcu[master]: tbf_ul_fm: Allow receiving event TBF_EV_MAX_N3105 in state RELEASING

by pespin

Attention is currently required from: fixeria. pespin has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-pcu/+/31730 ) Change subject: tbf_ul_fm: Allow receiving event TBF_EV_MAX_N3105 in state RELEASING ...................................................................... Patch Set 1: (1 comment) File src/tbf_ul_fsm.c: https://gerrit.osmocom.org/c/osmo-pcu/+/31730/comment/61ecc682_f0067a5a PS1, Line 287: break; > Don't we want to `assert()` if we get other event here? Ack -- To view, visit https://gerrit.osmocom.org/c/osmo-pcu/+/31730 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-pcu Gerrit-Branch: master Gerrit-Change-Id: I8560293d7b0f3bfefc1641208196404bc4848bfd Gerrit-Change-Number: 31730 Gerrit-PatchSet: 1 Gerrit-Owner: pespin <pespin(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Comment-Date: Wed, 08 Mar 2023 13:03:22 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Comment-In-Reply-To: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-MessageType: comment

2 years, 4 months

1
0
0 0

[M] Change in osmo-bts[master]: bts-trx: Fix no NM Radio{Carrier,Channel} not switching to Enabled if...

by pespin

pespin has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-bts/+/31749 ) Change subject: bts-trx: Fix no NM Radio{Carrier,Channel} not switching to Enabled if one TRX is rf_locked ...................................................................... bts-trx: Fix no NM Radio{Carrier,Channel} not switching to Enabled if one TRX is rf_locked Differentiate in each TRX between being provisioned (configuration available) and being provisioned *plus enabled*. TRX0 waits for all other TRX to be ready before sending POWERON, since all TRX need to have been minimally configured over TRXC before POWERON is called. This "ready" state though, doesn't necessarily mean the TRX!=0 are enabled (aka NM Enabled and rf_locked=0). With them being configured it es enough to start the whole PHY. With the old logic, given any TRX was rf_locked=1 at startup, the PHY would not become UP because it the TRX_PROV FSM was waiting for OPSTART to arrive on all TRX, which wouldn't happen on TRX that had rf_locked=1. So in summary, the desired requirements to start the PHY are (in any order): 1- Wait all TRX are configured 2- Wait for TRX0 OPSTART Related: SYS#6370 Change-Id: Ie4836f5721ce8227a63c267730aeb17228994214 --- M src/osmo-bts-trx/trx_provision_fsm.c 1 file changed, 49 insertions(+), 17 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-bts refs/changes/49/31749/1 diff --git a/src/osmo-bts-trx/trx_provision_fsm.c b/src/osmo-bts-trx/trx_provision_fsm.c index 5deecd7..8b20b10 100644 --- a/src/osmo-bts-trx/trx_provision_fsm.c +++ b/src/osmo-bts-trx/trx_provision_fsm.c @@ -253,11 +253,11 @@ l1h->config.setslot_sent[data->tn] = false; } -/* Whether a given TRX is fully configured and can be powered on */ +/* Whether a given TRX is fully configured */ static bool trx_is_provisioned(struct trx_l1h *l1h) { struct phy_instance *pinst = l1h->phy_inst; - if (l1h->config.enabled && l1h->config.rxtune_acked && l1h->config.txtune_acked && + if (l1h->config.rxtune_acked && l1h->config.txtune_acked && (l1h->config.bsic_acked || !pinst->phy_link->u.osmotrx.use_legacy_setbsic) && (l1h->config.tsc_acked || pinst->phy_link->u.osmotrx.use_legacy_setbsic) && (l1h->config.nomtxpower_acked || l1h->config.nominal_power_set_by_vty) && @@ -267,6 +267,11 @@ return false; } +/* Whether a given TRX is fully configured and can be powered on */ +static bool trx_is_provisioned_and_enabled(struct trx_l1h *l1h) +{ + return l1h->config.enabled && trx_is_provisioned(l1h); +} static void trx_signal_ready_trx0(struct trx_l1h *l1h) { @@ -282,7 +287,7 @@ } } -/* Called from TRX0 to check if other TRX are already configured and powered so POWERON can be sent */ +/* Called from TRX0 to check if other TRX are already configured so POWERON can be sent */ static bool trx_other_trx0_ready(struct trx_l1h *l1h) { struct phy_instance *pinst = l1h->phy_inst; @@ -293,7 +298,7 @@ struct trx_l1h *l1h_it = pinst_it->u.osmotrx.hdl; if (l1h_it->phy_inst->num == 0) continue; - if (l1h_it->provision_fi->state != TRX_PROV_ST_OPEN_POWERON) + if (!trx_is_provisioned(l1h_it)) return false; } return true; @@ -389,7 +394,8 @@ uint16_t arfcn; int nominal_power; int status; - bool others_ready; + bool waiting_other_trx; + bool was_ready = trx_is_provisioned(l1h); switch (event) { case TRX_PROV_EV_CLOSE: @@ -485,22 +491,22 @@ l1if_provision_transceiver_trx(l1h); - if (l1h->phy_inst->num == 0) - others_ready = trx_other_trx0_ready(l1h); - else - others_ready = true; /* we don't care about others in TRX!=0 */ + if (l1h->phy_inst->num == 0) { + waiting_other_trx = !trx_other_trx0_ready(l1h); + } else { + waiting_other_trx = false; /* we don't care about others in TRX!=0 */ + /* If we just became ready for TRX0 POWERON (aka this TRX becomes provisioned), signal it to TRX0: */ + if (l1h->phy_inst->num != 0 && (!was_ready && trx_is_provisioned(l1h))) + trx_signal_ready_trx0(l1h); + } /* if we gathered all data and could go forward. For TRX0, only after * all other TRX are prepared, since it will send POWERON commad */ - if (trx_is_provisioned(l1h) && - (l1h->phy_inst->num != 0 || others_ready)) { - if (l1h->phy_inst->num != 0) { + if (trx_is_provisioned_and_enabled(l1h) && !waiting_other_trx) { + if (l1h->phy_inst->num != 0) trx_prov_fsm_state_chg(fi, TRX_PROV_ST_OPEN_POWERON); - /* Once we are powered on, signal TRX0 in case it was waiting for us */ - trx_signal_ready_trx0(l1h); - } else { + else trx_prov_fsm_state_chg(fi, TRX_PROV_ST_OPEN_WAIT_POWERON_CNF); - } } else { LOGPFSML(fi, LOGL_INFO, "Delay poweron, wait for:%s%s%s%s%s%s%s%s\n", l1h->config.enabled ? "" :" enable", @@ -512,7 +518,7 @@ l1h->config.txtune_acked ? "" : " txtune-ack", l1h->config.nominal_power_set_by_vty ? "" : (l1h->config.nomtxpower_acked ? "" : " nomtxpower-ack"), l1h->config.setformat_acked ? "" : " setformat-ack", - (l1h->phy_inst->num != 0 || others_ready) ? "" : " other-trx" + waiting_other_trx ? "" : " other-trx" ); } } -- To view, visit https://gerrit.osmocom.org/c/osmo-bts/+/31749 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-bts Gerrit-Branch: master Gerrit-Change-Id: Ie4836f5721ce8227a63c267730aeb17228994214 Gerrit-Change-Number: 31749 Gerrit-PatchSet: 1 Gerrit-Owner: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: newchange

2 years, 4 months

1
0
0 0

[M] Change in osmo-bsc[master]: abis_rsl: CSD: add RTP_CSD_FMT IE to CRCX/MDCX

by osmith

osmith has submitted this change. ( https://gerrit.osmocom.org/c/osmo-bsc/+/31683 ) Change subject: abis_rsl: CSD: add RTP_CSD_FMT IE to CRCX/MDCX ...................................................................... abis_rsl: CSD: add RTP_CSD_FMT IE to CRCX/MDCX Related: OS#4393 Change-Id: I4964b268124d29354e252c2ee509866ae75fab6d --- M include/osmocom/bsc/abis_rsl.h M include/osmocom/bsc/lchan.h M src/osmo-bsc/abis_rsl.c M src/osmo-bsc/lchan_rtp_fsm.c 4 files changed, 107 insertions(+), 6 deletions(-) Approvals: fixeria: Looks good to me, approved pespin: Looks good to me, but someone else must approve Jenkins Builder: Verified diff --git a/include/osmocom/bsc/abis_rsl.h b/include/osmocom/bsc/abis_rsl.h index ea029e6..06880bf 100644 --- a/include/osmocom/bsc/abis_rsl.h +++ b/include/osmocom/bsc/abis_rsl.h @@ -120,6 +120,11 @@ int rsl_forward_layer3_info(struct gsm_lchan *lchan, const uint8_t *l3_info, uint8_t l3_info_len); +int ipacc_rtp_csd_fmt_transp(const struct channel_mode_and_rate *ch_mode_rate, + const enum rsl_ipac_rtp_csd_format_d format_d); +int ipacc_rtp_csd_fmt_non_transp(const struct channel_mode_and_rate *ch_mode_rate, + const enum rsl_ipac_rtp_csd_format_d format_d); + int ipacc_speech_mode(enum gsm48_chan_mode tch_mode, enum gsm_chan_t type); void ipacc_speech_mode_set_direction(uint8_t *speech_mode, bool send); int ipacc_payload_type(enum gsm48_chan_mode tch_mode, enum gsm_chan_t type); diff --git a/include/osmocom/bsc/lchan.h b/include/osmocom/bsc/lchan.h index a1eacef..135a067 100644 --- a/include/osmocom/bsc/lchan.h +++ b/include/osmocom/bsc/lchan.h @@ -286,6 +286,7 @@ uint16_t conn_id; uint8_t rtp_payload; uint8_t rtp_payload2; + uint8_t rtp_csd_fmt; uint8_t speech_mode; /* info we need to postpone the AoIP diff --git a/src/osmo-bsc/abis_rsl.c b/src/osmo-bsc/abis_rsl.c index ad1dc7c..8e89508 100644 --- a/src/osmo-bsc/abis_rsl.c +++ b/src/osmo-bsc/abis_rsl.c @@ -2582,6 +2582,65 @@ return rc; } +/* Return an ip.access RTP CSD FMT value (uint8_t) or negative on error. */ +int ipacc_rtp_csd_fmt_transp(const struct channel_mode_and_rate *ch_mode_rate, + const enum rsl_ipac_rtp_csd_format_d format_d) +{ + uint8_t ret = format_d; + + switch (ch_mode_rate->data_rate.t) { + case RSL_CMOD_CSD_T_32k0: + case RSL_CMOD_CSD_T_29k0: + ret |= RSL_IPAC_RTP_CSD_IR_32k << 5; + break; + case RSL_CMOD_CSD_T_14k4: + case RSL_CMOD_CSD_T_9k6: + ret |= RSL_IPAC_RTP_CSD_IR_16k << 5; + break; + case RSL_CMOD_CSD_T_4k8: + case RSL_CMOD_CSD_T_2k4: + case RSL_CMOD_CSD_T_1k2: + case RSL_CMOD_CSD_T_600: + case RSL_CMOD_CSD_T_1200_75: + ret |= RSL_IPAC_RTP_CSD_IR_8k << 5; + break; + default: + return -EINVAL; + } + + return ret; +} + +/* Return an ip.access RTP CSD FMT value (uint8_t) or negative on error. */ +int ipacc_rtp_csd_fmt_non_transp(const struct channel_mode_and_rate *ch_mode_rate, + const enum rsl_ipac_rtp_csd_format_d format_d) +{ + uint8_t ret = format_d; + + switch (ch_mode_rate->data_rate.nt) { + case RSL_CMOD_CSD_NTA_43k5_14k5: + case RSL_CMOD_CSD_NTA_43k5_29k0: + case RSL_CMOD_CSD_NTA_14k5_43k5: + case RSL_CMOD_CSD_NTA_29k0_43k5: + case RSL_CMOD_CSD_NT_43k5: + ret |= RSL_IPAC_RTP_CSD_IR_64k << 5; + case RSL_CMOD_CSD_NTA_29k0_14k5: + case RSL_CMOD_CSD_NTA_14k5_29k0: + case RSL_CMOD_CSD_NT_28k8: + ret |= RSL_IPAC_RTP_CSD_IR_32k << 5; + case RSL_CMOD_CSD_NT_14k5: + case RSL_CMOD_CSD_NT_12k0: + ret |= RSL_IPAC_RTP_CSD_IR_16k << 5; + case RSL_CMOD_CSD_NT_6k0: + ret |= RSL_IPAC_RTP_CSD_IR_8k << 5; + break; + default: + return -EINVAL; + } + + return ret; +} + /* Return an ip.access BTS speech mode value (uint8_t) or negative on error. */ int ipacc_speech_mode(enum gsm48_chan_mode tch_mode, enum gsm_chan_t type) { @@ -2755,9 +2814,11 @@ dh->chan_nr = chan_nr; if (lchan->current_ch_indctr == GSM0808_CHAN_DATA) { + msgb_tv_put(msg, RSL_IE_IPAC_RTP_CSD_FMT, lchan->abis_ip.rtp_csd_fmt); + LOG_LCHAN(lchan, LOGL_DEBUG, - "Sending IPACC CRCX to BTS: RTP_PAYLOAD=%d (CSD) osmux_use=%d osmux_loc_cid=%d\n", - lchan->abis_ip.rtp_payload, + "Sending IPACC CRCX to BTS: rtp_csd_fmt=0x%02x RTP_PAYLOAD=%d (CSD) osmux_use=%d osmux_loc_cid=%d\n", + lchan->abis_ip.rtp_csd_fmt, lchan->abis_ip.rtp_payload, lchan->abis_ip.osmux.use, lchan->abis_ip.osmux.local_cid); } else { /* 0x1- == receive-only, 0x-1 == EFR codec */ @@ -2806,8 +2867,12 @@ att_ip = (uint32_t *)msgb_put(msg, sizeof(uint32_t)); *att_ip = htonl(dest_ip); msgb_tv16_put(msg, RSL_IE_IPAC_REMOTE_PORT, dest_port); - if (lchan->current_ch_indctr == GSM0808_CHAN_SPEECH) + + if (lchan->current_ch_indctr == GSM0808_CHAN_DATA) + msgb_tv_put(msg, RSL_IE_IPAC_RTP_CSD_FMT, lchan->abis_ip.rtp_csd_fmt); + else msgb_tv_put(msg, RSL_IE_IPAC_SPEECH_MODE, lchan->abis_ip.speech_mode); + msgb_tv_put(msg, RSL_IE_IPAC_RTP_PAYLOAD, lchan->abis_ip.rtp_payload); if (lchan->abis_ip.rtp_payload2) msgb_tv_put(msg, RSL_IE_IPAC_RTP_PAYLOAD2, lchan->abis_ip.rtp_payload2); @@ -2832,12 +2897,13 @@ if (lchan->current_ch_indctr == GSM0808_CHAN_DATA) LOG_LCHAN(lchan, LOGL_DEBUG, "Sending IPACC MDCX to BTS:" - " %s:%u rtp_payload=%u (CSD) rtp_payload2=%u conn_id=%u\n", + " %s:%u rtp_payload=%u (CSD) rtp_payload2=%u conn_id=%u rtp_csd_fmt=0x%02x\n", ip_to_a(lchan->abis_ip.connect_ip), lchan->abis_ip.connect_port, lchan->abis_ip.rtp_payload, lchan->abis_ip.rtp_payload2, - lchan->abis_ip.conn_id); + lchan->abis_ip.conn_id, + lchan->abis_ip.rtp_csd_fmt); else LOG_LCHAN(lchan, LOGL_DEBUG, "Sending IPACC MDCX to BTS:" " %s:%u rtp_payload=%u rtp_payload2=%u conn_id=%u speech_mode=0x%02x\n", diff --git a/src/osmo-bsc/lchan_rtp_fsm.c b/src/osmo-bsc/lchan_rtp_fsm.c index c5dab49..c568a66 100644 --- a/src/osmo-bsc/lchan_rtp_fsm.c +++ b/src/osmo-bsc/lchan_rtp_fsm.c @@ -307,7 +307,26 @@ return; } - if (lchan->current_ch_indctr == GSM0808_CHAN_SPEECH) { + if (lchan->current_ch_indctr == GSM0808_CHAN_DATA) { + enum rsl_ipac_rtp_csd_format_d format_d = RSL_IPAC_RTP_CSD_TRAU_BTS; + + if (lchan->activate.ch_mode_rate.data_transparent) { + val = ipacc_rtp_csd_fmt_transp(&lchan->activate.ch_mode_rate, format_d); + if (val < 0) { + lchan_rtp_fail("Cannot determine Abis/IP RTP CSD format for rsl_cmod_csd_t=%d", + lchan->activate.ch_mode_rate.data_rate.t); + return; + } + } else { + val = ipacc_rtp_csd_fmt_non_transp(&lchan->activate.ch_mode_rate, format_d); + if (val < 0) { + lchan_rtp_fail("Cannot determine Abis/IP RTP CSD format for rsl_cmod_csd_nt=%d", + lchan->activate.ch_mode_rate.data_rate.nt); + return; + } + } + lchan->abis_ip.rtp_csd_fmt = val; + } else { val = ipacc_speech_mode(lchan->activate.ch_mode_rate.chan_mode, lchan->type); if (val < 0) { lchan_rtp_fail("Cannot determine Abis/IP speech mode for tch_mode=%s type=%s", -- To view, visit https://gerrit.osmocom.org/c/osmo-bsc/+/31683 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-bsc Gerrit-Branch: master Gerrit-Change-Id: I4964b268124d29354e252c2ee509866ae75fab6d Gerrit-Change-Number: 31683 Gerrit-PatchSet: 4 Gerrit-Owner: osmith <osmith(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: osmith <osmith(a)sysmocom.de> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-CC: laforge <laforge(a)osmocom.org> Gerrit-MessageType: merged

2 years, 4 months

1
0
0 0

[M] Change in osmo-bsc[master]: abis_rsl: CSD: add RTP_CSD_FMT IE to CRCX/MDCX

by fixeria

Attention is currently required from: osmith, laforge. fixeria has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-bsc/+/31683 ) Change subject: abis_rsl: CSD: add RTP_CSD_FMT IE to CRCX/MDCX ...................................................................... Patch Set 3: Code-Review+2 -- To view, visit https://gerrit.osmocom.org/c/osmo-bsc/+/31683 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-bsc Gerrit-Branch: master Gerrit-Change-Id: I4964b268124d29354e252c2ee509866ae75fab6d Gerrit-Change-Number: 31683 Gerrit-PatchSet: 3 Gerrit-Owner: osmith <osmith(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-CC: laforge <laforge(a)osmocom.org> Gerrit-Attention: osmith <osmith(a)sysmocom.de> Gerrit-Attention: laforge <laforge(a)osmocom.org> Gerrit-Comment-Date: Wed, 08 Mar 2023 11:42:24 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

2 years, 4 months

1
0
0 0

[S] Change in pysim[master]: docs: change upload path for html docs

by osmith

osmith has submitted this change. ( https://gerrit.osmocom.org/c/pysim/+/31718 ) Change subject: docs: change upload path for html docs ...................................................................... docs: change upload path for html docs Upload it to pysim/master/html instead of latest/pysim. Related: OS#5902 Change-Id: I0b338bd7d1fb2620d63e651eeb8e40c7d8e722e2 --- M docs/Makefile 1 file changed, 28 insertions(+), 1 deletion(-) Approvals: Jenkins Builder: Verified pespin: Looks good to me, but someone else must approve fixeria: Looks good to me, approved diff --git a/docs/Makefile b/docs/Makefile index 550d4e7..6effe53 100644 --- a/docs/Makefile +++ b/docs/Makefile @@ -14,6 +14,12 @@ UPLOAD_FILES = $(BUILDDIR)/latex/osmopysim-usermanual.pdf CLEAN_FILES = $(UPLOAD_FILES) +# Copy variables from Makefile.common.inc that are used in publish-html, +# as Makefile.common.inc must be included after publish-html +PUBLISH_REF ?= master +PUBLISH_TEMPDIR = _publish_tmpdir +SSH_COMMAND = ssh -o 'UserKnownHostsFile=$(OSMO_GSM_MANUALS_DIR)/build/known_hosts' -p 48 + # Put it first so that "make" without argument is like "make help". .PHONY: help help: @@ -23,7 +29,16 @@ @/bin/true publish-html: html - rsync -avz -e "ssh -o 'UserKnownHostsFile=$(OSMO_GSM_MANUALS_DIR)/build/known_hosts' -p 48" $(BUILDDIR)/html/ docs@ftp.osmocom.org:web-files/latest/pysim/ + rm -rf "$(PUBLISH_TEMPDIR)" + mkdir -p "$(PUBLISH_TEMPDIR)/pysim/$(PUBLISH_REF)" + cp -r "$(BUILDDIR)"/html "$(PUBLISH_TEMPDIR)/pysim/$(PUBLISH_REF)" + cd "$(PUBLISH_TEMPDIR)" && \ + rsync \ + -avzR \ + -e "$(SSH_COMMAND)" \ + "pysim" \ + docs@ftp.osmocom.org:web-files/ + rm -rf "$(PUBLISH_TEMPDIR)" # put this before the catch-all below include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.common.inc -- To view, visit https://gerrit.osmocom.org/c/pysim/+/31718 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: pysim Gerrit-Branch: master Gerrit-Change-Id: I0b338bd7d1fb2620d63e651eeb8e40c7d8e722e2 Gerrit-Change-Number: 31718 Gerrit-PatchSet: 1 Gerrit-Owner: osmith <osmith(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: osmith <osmith(a)sysmocom.de> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: merged

2 years, 4 months

1
0
0 0

[S] Change in pysim[master]: docs: change upload path for html docs

by fixeria

Attention is currently required from: osmith. fixeria has posted comments on this change. ( https://gerrit.osmocom.org/c/pysim/+/31718 ) Change subject: docs: change upload path for html docs ...................................................................... Patch Set 1: Code-Review+2 -- To view, visit https://gerrit.osmocom.org/c/pysim/+/31718 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: pysim Gerrit-Branch: master Gerrit-Change-Id: I0b338bd7d1fb2620d63e651eeb8e40c7d8e722e2 Gerrit-Change-Number: 31718 Gerrit-PatchSet: 1 Gerrit-Owner: osmith <osmith(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-Attention: osmith <osmith(a)sysmocom.de> Gerrit-Comment-Date: Wed, 08 Mar 2023 11:41:00 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

2 years, 4 months

1
0
0 0

[S] Change in osmo-ttcn3-hacks[master]: bsc: TC_ho_in_fail_no_detect: fix sporadic fails

by fixeria

Attention is currently required from: osmith. fixeria has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/31748 ) Change subject: bsc: TC_ho_in_fail_no_detect: fix sporadic fails ...................................................................... Patch Set 1: Code-Review+1 -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/31748 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: Ie0216504b6bdac38c2f7dcc23fc8e9a7e5acff57 Gerrit-Change-Number: 31748 Gerrit-PatchSet: 1 Gerrit-Owner: osmith <osmith(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Attention: osmith <osmith(a)sysmocom.de> Gerrit-Comment-Date: Wed, 08 Mar 2023 11:37:34 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

2 years, 4 months

1
0
0 0

[S] Change in osmo-pcu[master]: tbf: Increase log level if polling requested in wrong TS

by osmith

Attention is currently required from: pespin. osmith has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-pcu/+/31729 ) Change subject: tbf: Increase log level if polling requested in wrong TS ...................................................................... Patch Set 1: Code-Review+2 -- To view, visit https://gerrit.osmocom.org/c/osmo-pcu/+/31729 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-pcu Gerrit-Branch: master Gerrit-Change-Id: I641bddcb4027ecc9cc1ec66d4d6b9b483c94c617 Gerrit-Change-Number: 31729 Gerrit-PatchSet: 1 Gerrit-Owner: pespin <pespin(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: osmith <osmith(a)sysmocom.de> Gerrit-Attention: pespin <pespin(a)sysmocom.de> Gerrit-Comment-Date: Wed, 08 Mar 2023 11:36:59 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

2 years, 4 months

1
0
0 0

[S] Change in osmo-ttcn3-hacks[master]: bsc: TC_ho_in_fail_no_detect: fix sporadic fails

by osmith

osmith has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/31748 ) Change subject: bsc: TC_ho_in_fail_no_detect: fix sporadic fails ...................................................................... bsc: TC_ho_in_fail_no_detect: fix sporadic fails Don't fail the test if the BSSAP Handover Failure arrives after both MGCP DLCX. In that case, the DLCX arrive at as_Media_mgw() in MSC_ConnectionHandler. Set pars.fail_on_dlcx := false so it gets ignored there and stays in the queue, until f_expect_dlcx_conns() in f_tc_ho_in_fail_no_detect() takes care of them. Fix for: TC_ho_in_fail_no_detect(1979)@ba5f1f91fb11: setverdict(fail): none -> fail reason: "Unexpected DLCX received", new component reason: "Unexpected DLCX received" Timeout of T_guard BSC_Tests.ttcn:12410 BSC_Tests control part BSC_Tests.ttcn:6990 TC_ho_in_fail_no_detect testcase Change-Id: Ie0216504b6bdac38c2f7dcc23fc8e9a7e5acff57 --- M bsc/BSC_Tests.ttcn 1 file changed, 24 insertions(+), 0 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-ttcn3-hacks refs/changes/48/31748/1 diff --git a/bsc/BSC_Tests.ttcn b/bsc/BSC_Tests.ttcn index 98f60ef..5a22c00 100644 --- a/bsc/BSC_Tests.ttcn +++ b/bsc/BSC_Tests.ttcn @@ -6978,6 +6978,8 @@ var MSC_ConnHdlr vc_conn; var TestHdlrParams pars := f_gen_test_hdlr_pars(); + pars.fail_on_dlcx := false; + f_init(1, true); f_sleep(1.0); -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/31748 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: Ie0216504b6bdac38c2f7dcc23fc8e9a7e5acff57 Gerrit-Change-Number: 31748 Gerrit-PatchSet: 1 Gerrit-Owner: osmith <osmith(a)sysmocom.de> Gerrit-MessageType: newchange

2 years, 4 months

1
0
0 0

2025

2024

2023

2022

gerrit-log March 2023