UmTRX

umtrx@lists.osmocom.org

189 discussions

where are current repo versions of UHD, openBTS and Gnuradio?

by Robert Light

11 years, 8 months

Do a libusrp at the command line to see if your system recognizes your SDR device. End of Message... Re: Re: where are current repo versions of UHD, openBTS and Gnuradio?

by Martin O'Shield

On Sat, Nov 2, 2013 at 5:10 AM, Robert Light <robert.light(a)gmx.de> wrote: > Hi, I am aware of Commotion-OpenBTS and I even gave it a try, however for > some reason it does not detect my usrp1. > Are there more detailed instructions on how to use it? > I simply put it on a USB stick with unetbootin, no persistance (adding > persistance would be nice). When booted it does the configuration > succesfully, but what to do after that ? > Commotion-OpenBTS is a great idea, if I could only get it to work. > > Alexander, Will GnuRadio 3.6 work with usrp1 and osmoBTS or openBTS? > I am also intalling osmobts on another computer, but that is causing me a > lot of problems. ortp and srtp seem to be conflicting with libosip2-dev and > libortp-dev from ubuntu and when I install > http://download.savannah.gnu.org/releases/linphone/ortp/sources/ > http://sourceforge.net/projects/sofia-sip/files/sofia-sip/ > I get problems compiling OpenBTS and some other software. > So it looks like OpenBTS and OsmoBTS cannot coexist on one computer. At > least not on my. > Too many versions keep confusing me. i.e. openbts-P2.8.0Opelousas.tar.gz > from http://sourceforge.net/projects/openbts/files/2.8.0/ > for some reason doesn't understand > "--with-usrp1 --with-singledb" switches but openbts 2.8 downloaded from > other sources has no problems with that. > > *Gesendet:* Samstag, 02. November 2013 um 00:36 Uhr > *Von:* "Martin O'Shield" <martin(a)windycitysdr.com> > *An:* "Robert Light" <robert.light(a)gmx.de> > *Cc:* umtrx <umtrx(a)lists.osmocom.org> > *Betreff:* Re: where are current repo versions of UHD, openBTS and > Gnuradio? > Robert, > > > > This is a easy solution here: > > > > > Commotion-OpenBTS > > ==Introduction== > > Commotion-OpenBTS is packaged as a customized x86 Ubuntu Linux > distribution. > It comes as a live image that can be booted from a USB drive or CD. This > repository contains resources used to create the Commotion-OpenBTS image. > > The purpose of this software is to allow voice calls over a Commotion > wireless mesh network. Phone calls can be made between GSM unlocked phones, > or between GSM unlocked phones and phones meshing over WiFi with the Serval > "Batphone" software. > > In order to use Commotion-OpenBTS, you need a compatible GSM hardware > transceiver. Currently, compatible hardware includes the Range RAD1; > the Ettus USRP1, USRP2, N200 series, B100 series, and E100 series; and > the Fairwaves UmTRX. > > > > > > ==How to Run It== > > To run Commotion-OpenBTS, download the ISO file at > https://commotionwireless.net/download, and load it onto a USB drive using > unetbootin, or your tool of choice. You can then boot from the USB drive > with your laptop or desktop computer, with your GSM radio attached. Once > the OS is loaded, a configuration wizard asks you what type of GSM hardware > you have, and configures the proper driver. After that, everything should > be > running, and you can start making calls! > > ==Components== > > Commotion-OpenBTS includes the following open source software components: > * OpenBTS (http://wush.net/trac/rangepublic/browser) > * OLSRd (http://olsr.org/git/?p=olsrd.git;a=summary) > * Serval (https://github.com/servalproject/serval-dna) > * Asterisk (http://www.asterisk.org/downloads/source-code) > > > http://files.opentechinstitute.org/~critzo/commotion/Commotion-OpenBTS-x86.… > > Just utilize the Commotion-OpenBTS-x86.iso and it *should* work for both > the USRP1 and the UmTRX. > > Only one application can access the SDR device of your choice at a time. > > That's the nature of OpenBTS. > > Sincerely, > > > > Martin > > > On Fri, Nov 1, 2013 at 4:21 PM, Robert Light <robert.light(a)gmx.de> wrote: >> >> Hi, Can someone point me to the current repo of UHD, openBTS and >> Gnuradio ? >> I found several locations especially for openBTS and UHD i.e.: >> "-b gprs-exp https://github.com/fairwaves/openbts-2.8.git" >> "-b gprs-exp https://github.com/chemeris/openbts-p2.8.git" >> "-b umtrx https://github.com/chemeris/openbts-p2.8.git" >> So which one of the above is correct? >> >> "https://github.com/chemeris/UHD-Fairwaves.git" >> "https://github.com/fairwaves/UHD-Fairwaves.git" >> Again, which one of the above is correct? >> >> I assume the below is correct: >> "wget >> http://gnuradio.org/redmine/attachments/download/279/gnuradio-3.4.2.tar.gz >> " >> >> I need a version of UHD, openBTS and Gnuradio that will run with both >> USRP1 and UmTRX at the same time. I mean, one of them connected at a time, >> but I do not want to have two computers with separate installations for >> usrp1 and UmTRX. >> Can I configure openBTS with --with-usrp1 --with-singledb --with-uhd ? >> I mean, can I enable usrp1 and uhd at the same time ? >> How to switch then between usrp1 and UmTRX ? >> >> >

11 years, 8 months

libsrtp version exports symbols conflicting with other libraries

by Robert Light

11 years, 8 months

fairwave openbts build problem sqlite3

by Robert Light

11 years, 8 months

Fwd: [Discuss-gnuradio] FOSDEM '14 - Call for Participation

by Alexander Chemeris

FYI. Most likely UmTRX will be present there. Please excuse typos. Written with a touchscreen keyboard. -- Regards, Alexander Chemeris CEO/Founder Fairwaves LLC http://fairwaves.ru ---------- Forwarded message ---------- From: "Martin Braun (CEL)" <martin.braun(a)kit.edu> Date: Oct 14, 2013 6:36 PM Subject: [Discuss-gnuradio] FOSDEM '14 - Call for Participation To: <discuss-gnuradio(a)gnu.org> Cc: Dear friends and colleagues, next year's FOSDEM (the free and open source developer's meeting in Brussels, Europe) will feature a new track on Software Defined Radio. Therefore, we invite developers and users from the free software radio community and to join us for this track and present your talks or demos. Software Radio has become an important tool to allow anyone access the EM spectrum. Using free software radio libraries and applications and cheap hardware, anyone can now start hacking on wireless communications, remote sensing, radar or other applications. At FOSDEM, we hope to network all these projects and improve collaboration, bring new ideas forward and get more people involved. The track's web site resides at: http://gnuradio.org/redmine/projects/gnuradio/wiki/FOSDEM14 Here, we will publish updates and the final schedule. ** Submit your presentations To suggest a talk, go to https://penta.fosdem.org/submission/FOSDEM14 and follow the instructions. You need to create an 'Event'; make sure it's in the Software Defined Radio track! Lengths aren't fixed, but give a realistic estimate and please don't exceed 30 minutes unless you have something special planned (in that case, contact one of us). Also, don't forget to include time for Q&A. Typical slot lengths would be 30 Minutes including QA. You aren't limited to slide presentations, of course. Be creative. However, FOSDEM is an open source conference, therefore we ask you to stay clear of marketing presentations. Of course, we like nitty-gritty technical stuff. We will reserve time to simply hack, it won't all be talks. ** Important Dates FOSDEM is February 1st & 2nd 2014. * December 1st 2013: Submission Deadline * December 20th 2013: Speaker Notification * January 10th 2014: Announcement of final schedule * February 2nd 2014: SDR Track ** Steering Committee The track committee consists of: * Philipp Balister (OpenEmbedded / OpenSDR) * Martin Braun (GNU Radio) * Sylvain Munaut (OsmoCom) Hope to hear of you soon! Martin -- Karlsruhe Institute of Technology (KIT) Communications Engineering Lab (CEL) Dipl.-Ing. Martin Braun Research Associate Kaiserstraße 12 Building 05.01 76131 Karlsruhe Phone: +49 721 608-43790 Fax: +49 721 608-46071 www.cel.kit.edu KIT -- University of the State of Baden-Württemberg and National Laboratory of the Helmholtz Association _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio(a)gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

11 years, 9 months

Re:

by Alexander Chemeris

Программа честно в конце говорит: "Please specify the sample rate with --rate" 2013/10/14 Игорь Анатольевич <einein11(a)yandex.ru>: > Мне кажется, UmTRX меня понимает, но выход не выдаёт. Например, на команду синуса показывает следующее: > [igor@localhost examples]$ ./tx_waveforms --wave-type SINE > linux; GNU C++ version 4.7.2; Boost_105300; UHD_003.004.000-unknown > > > UHD Warning: > Unable to set the thread priority. Performance may be negatively affected. > Please see the general application notes in the manual for instructions. > EnvironmentError: OSError: error in pthread_setschedparam > > Creating the usrp device with: ... > -- Opening a UmTRX device... > -- Current recv frame size: 1472 bytes > -- Current send frame size: 1472 bytes > > UHD Warning: > Unable to set the thread priority. Performance may be negatively affected. > Please see the general application notes in the manual for instructions. > EnvironmentError: OSError: error in pthread_setschedparam > > UHD Warning: > Unable to set the thread priority. Performance may be negatively affected. > Please see the general application notes in the manual for instructions. > EnvironmentError: OSError: error in pthread_setschedparam > Using Device: Single USRP: > Device: UmTRX Device > Mboard 0: UMTRX-REV0 > RX Channel: 0 > RX DSP: 0 > RX Dboard: A > RX Subdev: LMS6002D (0xfa07) - 0 > TX Channel: 0 > TX DSP: 0 > TX Dboard: A > TX Subdev: LMS6002D (0xfa09) - 0 > > Please specify the sample rate with --rate > > 14.10.2013, 09:42, "Alexander Chemeris" <alexander.chemeris(a)gmail.com>: >> Утилиту нужн запускать при выключеном OpenBTS. >> >> Посмотреть параметры - "./tx_waveforms --help" >> >> 2013/10/14 Игорь Анатольевич <einein11(a)yandex.ru>: >> >>> Спасибо за ответ, но каким образом я могу запустить утилиту? Из-под "OpenBTS" не находит команду, а через команды "cd /usr/local/share/uhd/examples/" и "./tx_waveforms" не находит устройство >>> (Error: LookupError: KeyError: No devices found for -----> >>> Empty Device Address). >>> И ещё - могу ли я посмотреть примеры команд от этой утилиты? >>> >>> 12.10.2013, 18:06, "Alexander Chemeris" <alexander.chemeris(a)gmail.com>: >>>> 2013/10/4 Игорь Анатольевич <einein11(a)yandex.ru>: >>>>> Добрый день! >>>>> Использую UmTRX2. на запрос "noise" выдаёт значения, получается задать >>>>> параметры GSM, однако на команду "chans" система не выдаёт числа. С чем это >>>>> может быть связано? >>>> Затрудняюсь ответить. Может быть просто нет активных каналов? >>>> >>>> Из-за низкой стабильности OpenBTS под нагрузкой, мы полностью перешли >>>> на софт от Osmocom и не очень следим за последними версиями OpenBTS. >>>>> Так же хотел задать вопрос - можно ли с помощью UmTRX2 делать не GSM, а, >>>>> скажем, обычный синус с заданной амплитудой и частотой? И, если да, то каким >>>>> образом? >>>> Конечно можно. Самый простой способ - утилита >>>> /usr/share/uhd/examples/tx_waveforms, которая входит в состав UHD. >>>> >>>> -- >>>> Regards, >>>> Alexander Chemeris. >>>> CEO, Fairwaves LLC / ООО УмРадио >>>> http://fairwaves.ru >>> -- >>> С уважением, Литовкин Игорь. >> >> -- >> Regards, >> Alexander Chemeris. >> CEO, Fairwaves LLC / ООО УмРадио >> http://fairwaves.ru > > -- > С уважением, Литовкин Игорь. -- Regards, Alexander Chemeris. CEO, Fairwaves LLC / ООО УмРадио http://fairwaves.ru

11 years, 9 months

Re:

by Alexander Chemeris

Утилиту нужн запускать при выключеном OpenBTS. Посмотреть параметры - "./tx_waveforms --help" 2013/10/14 Игорь Анатольевич <einein11(a)yandex.ru>: > Спасибо за ответ, но каким образом я могу запустить утилиту? Из-под "OpenBTS" не находит команду, а через команды "cd /usr/local/share/uhd/examples/" и "./tx_waveforms" не находит устройство > (Error: LookupError: KeyError: No devices found for -----> > Empty Device Address). > И ещё - могу ли я посмотреть примеры команд от этой утилиты? > > 12.10.2013, 18:06, "Alexander Chemeris" <alexander.chemeris(a)gmail.com>: >> 2013/10/4 Игорь Анатольевич <einein11(a)yandex.ru>: >> >>> Добрый день! >>> Использую UmTRX2. на запрос "noise" выдаёт значения, получается задать >>> параметры GSM, однако на команду "chans" система не выдаёт числа. С чем это >>> может быть связано? >> >> Затрудняюсь ответить. Может быть просто нет активных каналов? >> >> Из-за низкой стабильности OpenBTS под нагрузкой, мы полностью перешли >> на софт от Osmocom и не очень следим за последними версиями OpenBTS. >> >>> Так же хотел задать вопрос - можно ли с помощью UmTRX2 делать не GSM, а, >>> скажем, обычный синус с заданной амплитудой и частотой? И, если да, то каким >>> образом? >> >> Конечно можно. Самый простой способ - утилита >> /usr/share/uhd/examples/tx_waveforms, которая входит в состав UHD. >> >> -- >> Regards, >> Alexander Chemeris. >> CEO, Fairwaves LLC / ООО УмРадио >> http://fairwaves.ru > > -- > С уважением, Литовкин Игорь. -- Regards, Alexander Chemeris. CEO, Fairwaves LLC / ООО УмРадио http://fairwaves.ru

11 years, 9 months

Re: Re: Hello

by jiangwy

Hi Manoel Aposaz, Please edit the file transceiver52M/UHDDevice.cpp Changing "const double master_clk_rt = 52e6;" to "const double master_clk_rt = 13e6; " Then rebuilding... jiangwy From: Manoel Aposaz Date: 2013-09-16 00:27 To: wyjiang Subject: Re: Re: Hello Hi wyjiang I need you again, please if you have time, look at this for me: I have got the error you got 2 month ago when you post : " Hi All, I install all the OpenBTS and UHD packages according to manual pages. When I start transceiver, it output some errors and exit. $ sudo ./transceiver 1 linux; GNU C++ version 4.6.3; Boost_104601; UHD_003.004.000-unknown ALERT 3048163072 19:59:34.7 UHDDevice.cpp:345:set_rates: Failed to set master clock rate ALERT 3048163072 19:59:34.7 UHDDevice.cpp:346:set_rates: Actual clock rate 1.3e+07 ALERT 3048163072 19:59:34.7 runTransceiver.cpp:94:main: Transceiver exiting... Jiang Wenyi " Do you remember how you fix this problem ?? Hope to read you my friend. Best regards. 2013/9/12 Manoel Aposaz <goorbatchev(a)gmail.com> ok. I thought i could test it on saturday but now, i dont really know what to do, if i had to order again for antennas i think i will take time... About the problem i got when i was trying to run openBts do you have an idea of what can be the cause?? 2013/9/12 jiangwy <wyjiang(a)ljshuoda.com> yes jiangwy From: Manoel Aposaz Date: 2013-09-12 23:42 To: wyjiang Subject: Re: Re: Hello Thanks for yours answers but i want to know, for a simple test to connect two phones, do i need four antennas?? 2013/9/12 jiangwy <wyjiang(a)ljshuoda.com> You must buy 2 more antennas by yourself. You may not using GPS. jiangwy From: Manoel Aposaz Date: 2013-09-12 23:10 To: wyjiang Subject: Re: Re: Hello it is all what i receive with the package.. And about GPS i did't get really what your are meaning...where will i connect it?? 2013/9/12 jiangwy <wyjiang(a)ljshuoda.com> jiangwy From: Manoel Aposaz Date: 2013-09-12 22:38 To: wyjiang(a)ljshuoda.com Subject: Re: Hello Thanks Wyjian for your answer I have connect the four cable on the PCB and here is the picture of it. I still don't know how to connect them to other component such as antennas. Look at the image and tell me something please. I am waiting to read you.. Best regards. 2013/9/12 Manoel Aposaz <goorbatchev(a)gmail.com> Hi I am Emmanuel, i am working on an openBTS project and i have the umtrx module to accomplish this. I know recently you did it, i red your questions during this time in the mailing list, i send a message in this mailing list, i didn't have an answer up to know. i really need help. My question is this: 1 - i don't know how to run openbts; i went to this directory : openbts/trunk/apps: and i run it by : ./openbts but it saying that no file or directory ./openbts; i dont know if you have an idea of what can be the problem. i attache the image of the screen. 2- Secondly, i want to know how you put your openbts cables and other part of the package togheter, i receive the package with just an circuit, an antennas and 4 cables that i don't know what to do with it, also an GPS antenna. i don't know really how to connect them. I really need help, hope to read you. Thanks and have a nice day my friend. Best regards.

11 years, 10 months

NO UHD DEVICE FOUND,

by Manoel Aposaz

Hello all, Please someone know how to fixe this problem. I am trying to run the OpenBTS with the Umtrx module, and i am getting this error: NO UHD DEVICE FOUND, BUT the ping command work properly showing the connection between them (Umtrx and the computer), also the uhd_find_device command work properly showing the umtrx module... Could some one tell me what can be the next step to solve this problem?? Here is a picture of this. Hope to read someone. Best ragards.

11 years, 10 months

how can i scan the frequencies in an area with GNU radio and Umtrx

by Manoel Aposaz

Hi all, If, someone is reading this, please i need help: 1- I want to know if there is a manual showing how to put all the part of the package of Umtrx togheter. 2- If i want to scan the frequencies in an area, what can i install to let GNU radio communicate with Umtrx to show the frequency graph that will help me choose the non used frequencies (it is possible with USRP and i want to know how to do it with Umtrx). 3- My last question is to know if handover is possible with just OpenBTS 2.8 and Umtrx modules or it required an OpenBSC and OsmoBTS architecture. Best regards: Manoel.

11 years, 10 months

← Newer
1
2
3
4
5
6
7
8
...
19
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

UmTRX