On Wed, Sep 26, 2018 at 07:22:14PM +0700, Александр Федоров wrote:
I am writing to you from far Siberia. I use SIMtrace v1 and I have some problem. Could you halp me? firmware v0.5 lose data and data in Wireshark isn't corrected: [image: image.png] Can I resolve my problem on V1 Simtrace or I have to buy SIMtrace V2?
the SIMtrace v1 firmware for the AT91SAM7S isn't supported anymore and the issue will probably not be fixed. if the error is present in the SIMtrace v2 firmware, it will be fixed.
the boards are almost identical. the SIMtrace v1 firmware is for the AT91SAM7S micro-controller. the SIMtrace v2 firmware is for the SAM3S micro-controller. thus if you have some soldering skills you can convert your v1 board into a v2 board by switching the AT91SAM7S micro-controller with an SAM3S4B and flash the v2 firmware. else you will have to by a new SIMtrace V2 (or let it produce, based on the open source hardware files).
Dear Kevin and SIMtrace user list,
On Wed, Sep 26, 2018 at 07:45:06PM +0200, Kévin Redon wrote:
the SIMtrace v1 firmware for the AT91SAM7S isn't supported anymore and the issue will probably not be fixed.
To clarify this: It will not be fixed by Kevin or me, the original authors.
But: SIMtrace is and always was an open hardware and open source software project, where anyone can fix any bug or extend it in whichever way.
We're happy to merge bugfixes by the community, or provide commit access to any developer who has an interest in maintaining or extending SIMtrace v1 firmware.
There is also the option of porting the SIMtrace v2 firmware tree to the SIMtrace v1 hardware. It shouldn't be all that hard, as all the peripherals around the CPU core are identical, and almost only the CPU core changed from SAM7S (SIMtrace v1) to SAM3S (SIMtrace v2).
if the error is present in the SIMtrace v2 firmware, it will be fixed.
This means: It will be fixed by Kevin and/or me, the original creators of SIMtrace.
Regards, Harald
Hi
I made most of the recent changes to the v1 firmware to increase its stability. As far as I can tell, the changes I submitted was reliable and we use it with lots of phones and sim cards.
If you are seeing the device looping the text from the beginning of the BOOT [000001] ...then that means your device is REBOOTING a lot. Perhaps check USB cable? or USB connector or other USB issues?
If Wireshark was not able to sync to the GSMTAP ATR data (although we don't use Wireshark dissector, we use our own dissector), it mostly likely means you are not using the version where additional bytes were inserted into the simtrace response header to account the length of USB data transfer. I have not been tracking the current / latest built firmware so I don't know if the fields in question are added both in the firmware and in the desktop software.
For reference, please look at this the mailing list archive for Nov 2017 ( http://lists.osmocom.org/pipermail/simtrace/2017-November/000746.html ) and Sep 2013 http://lists.osmocom.org/pipermail/simtrace/2013-September/thread.html
Also, please double check that the board does not power up the Phone side SIM interface, see: http://lists.osmocom.org/pipermail/simtrace/2017-November/000746.html
Best Regards
On Wed, Sep 26, 2018 at 2:36 AM
From: "Александр Федоров" wind3style@gmail.com To: simtrace@lists.osmocom.org Cc: Bcc: Date: Wed, 26 Sep 2018 19:22:14 +0700 Subject: Fwd: SIMtrace
-- Fedorov Alexander Mobile: +7-908-212-98-05https://www.linkedin.com/in/wind3style/ http://www.svyazcom.ru/en/E-mail:wind3style@gmail.com
---------- Forwarded message --------- From: Александр Федоров wind3style@gmail.com Date: ср, 26 сент. 2018 г. в 17:59 Subject: SIMtrace To: hwelte@hmw-consulting.de
Hello Harald!
I am writing to you from far Siberia. I use SIMtrace v1 and I have some problem. Could you halp me? firmware v0.5 lose data and data in Wireshark isn't corrected: [image: image.png] Can I resolve my problem on V1 Simtrace or I have to buy SIMtrace V2?
last version firmware from repository doesn't work correctly at all by looping this DEBUG text: [000001] (C) 2006-2011 by Harald Welte hwelte@hmw-consulting.de This software is FREE SOFTWARE licensed under GNU GPL [000002] Version 0.5.27-5a40-dirty compiled 20180926-170104 by xmobi@xmobi-B250M-DS3H
[000003] DEBUG Interface: 0) Set Pull-up 1) Clear Pull-up 2) Toggle LED1 3) Toggle LED2 9) Reset [000004] RSTC_SR=0x00010200 [000005] LARGE req_ctx[00] initialized at 002055AC, Data: 00200A68 => 00200E28 [000006] LARGE req_ctx[01] initialized at 002055C0, Data: 00200E28 => 002011E8 [000007] LARGE req_ctx[02] initialized at 002055D4, Data: 002011E8 => 002015A8 [000008] LARGE req_ctx[03] initialized at 002055E8, Data: 002015A8 => 00201968 [000009] LARGE req_ctx[04] initialized at 002055FC, Data: 00201968 => 00201D28 [00000A] LARGE req_ctx[05] initialized at 00205610, Data: 00201D28 => 002020E8 [00000B] LARGE req_ctx[06] initialized at 00205624, Data: 002020E8 => 002024A8 [00000C] LARGE req_ctx[07] initialized at 00205638, Data: 002024A8 => 00202868 [00000D] LARGE req_ctx[08] initialized at 0020564C, Data: 00202868 => 00202C28 [00000E] LARGE req_ctx[09] initialized at 00205660, Data: 00202C28 => 00202FE8 [00000F] LARGE req_ctx[10] initialized at 00205674, Data: 00202FE8 => 002033A8 [000010] LARGE req_ctx[11] initialized at 00205688, Data: 002033A8 => 00203768 [000011] LARGE req_ctx[12] initialized at 0020569C, Data: 00203768 => 00203B28 [000012] LARGE req_ctx[13] initialized at 002056B0, Data: 00203B28 => 00203EE8 [000013] LARGE req_ctx[14] initialized at 002056C4, Data: 00203EE8 => 002042A8 [000014] LARGE req_ctx[15] initialized at 002056D8, Data: 002042A8 => 00204668 [000015] LARGE req_ctx[16] initialized at 002056EC, Data: 00204668 => 00204A28 [000016] LARGE req_ctx[17] initialized at 00205700, Data: 00204A28 => 00204DE8 [000017] LARGE req_ctx[18] initialized at 00205714, Data: 00204DE8 => 002051A8 [000018] LARGE req_ctx[19] initialized at 00205728, Data: 002051A8 => 00205568 [000019] Inititalizing usbcmd_gen_init [00001A] udp_open(440): entering [00001B] USART Initializing [00001C] pio_irq_register(109): registering handler 001079bc for PIOA 7 [00001D] RST [00001E] computed Fi(1) Di(1) ratio: 372
-- Fedorov Alexander Mobile: +7-908-212-98-05https://www.linkedin.com/in/wind3style/ http://www.svyazcom.ru/en/E-mail:wind3style@gmail.com
simtrace mailing list simtrace@lists.osmocom.org https://lists.osmocom.org/mailman/listinfo/simtrace