Hello,
I am currently working on several projects for IoT based solutions using the SIMTrace2 board and software.
I have not been able to locate/install the SIMTrrace2-remsim application. Whilst I have SIMTrace2 itself installed and functional there is no reference to the remsim function.
I am using binaries from the Raspbian 11 repo.
The related wiki indicates that remsim would be part of the SIMTrace2 installation (albiet referencing the method of compiling locally). However, I find no reference to it in my standard installation.
Would it be possible to point me in the right direction to install this function? Is there an alternate version of the software required to do this?
Many thanks,
Marc Wilson
Marc Wilson
Technical Consultant
t: +44 1483 802 503 |
w: eseye.com
LinkedIn | Twitter |
YouTube |
Blog
This email is from Eseye
. Address:
20 Nugent Road, Guildford, Surrey, GU2 7AF, United Kingdom. Registered in England and Wales - number 06397669. VAT: GB921298326. ISO 27001: 2013 Certified.
If you are not the intended recipient, please notify the sender and delete this email and any attachments. Eseye, AnyNet, AnyNet Secure and Eseye Logos are registered trademarks. 2021 Eseye Limited. All rights reserved.
Dear osmocom team,
I am trying to set up the osmocom-remsim application. The goal is, that
the phone uses the SIM inserted into the card reader and connects to my
EPS. I am using a SCR 3310 Card Reader and the simtrace2 hardware. I
setup the bankd and the slotmap according to the manual. It seems, that
the mapping is fine although, when I start the client, the execution
terminates with "USB OUT transfer failed, status=2". The phone does not
recognize a SIM inserted.
Setup:
Debian 11, simtrace plugged into the computer. Simtrace is attached to
a mobile Phone (Samsung galaxy A90 5G or Apple iPhone 13). SCR 3310 has
a sysmoISIM-SJA2 card inserted, which is configured to attach to a
custom cell distributed via srsRAN.
Note that the OS is hosted as a VM with KVM/QEMU. When using only the
simtrace, without remism, the SIM Card which is inserted into the board
works as intended and the phone connects with my EPS.
Configuration:
bankd_pcsc_slots.csv:
"1", "0", "SCM Microsystems Inc\. SCR 3310 \[CCID Interface\]
\(53311702704887\) 00 00"
osmo-remsim-bankd:
osmo-remsim-bankd -i 127.0.0.1 -b 1 -n 1 -d
osmo-remsim-client-st2:
osmo-remsim-client-st2 -V 1d50 -P 60e3 -C 1 -H 1-2 -S 0 -I 0 -n 0 -c 0
apitool:
./remsim-apitool.py -m 1 0 0 0
output of ./remsim-apitool.py -a:
/clients: {'clients': [{'peer': 'C0:0', 'state': 'CONNECTED_CLIENT',
'component_id': {'type_': 'remsimClient', 'name': 'debian', 'software':
'remsim-client', 'swVersion': '1.0.0.19-a563'}}]}
/banks: {'banks': [{'peer': 'B1', 'state': 'CONNECTED_BANKD',
'component_id': {'type_': 'remsimBankd', 'name': 'debian', 'software':
'remsim-bankd', 'swVersion': '1.0.0.19-a563'}, 'bankId': 1,
'numberOfSlots': 1}]}
/slotmaps: {'slotmaps': [{'bank': {'bankId': 1, 'slotNr': 0}, 'client':
{'clientId': 0, 'slotNr': 0}, 'state': 'ACTIVE'}]}
output of client:
DRSPRO INFO ../rspro_client_fsm.c:306
RSPRO_CLIENT(server){REESTABLISH}: Creating TCP connection to server at
127.0.0.1:9998
DLINP NOTICE simtrace2_api.c:267 [0] <=
osmo_st2_cardem_request_config(features=00000001)
DLINP NOTICE input/ipa.c:128 127.0.0.1:9998 connection done
DRSPRO NOTICE ../rspro_client_fsm.c:124
RSPRO_CLIENT(server){REESTABLISH}: RSPRO link to 127.0.0.1:9998 UP
DRSPRO INFO ../rspro_client_fsm.c:306 RSPRO_CLIENT(bankd){REESTABLISH}:
Creating TCP connection to server at 127.0.0.1:9999
DLINP NOTICE input/ipa.c:128 127.0.0.1:9999 connection done
DRSPRO NOTICE ../rspro_client_fsm.c:124
RSPRO_CLIENT(bankd){REESTABLISH}: RSPRO link to 127.0.0.1:9999 UP
DLINP NOTICE simtrace2_api.c:168 [0] <=
osmo_st2_cardem_request_card_insert(inserted=1)
DLINP NOTICE simtrace2_api.c:317 [0] <= _modem_sim_select(remote_sim=1)
DLINP NOTICE simtrace2_api.c:250 [0] <=
osmo_st2_cardem_request_set_atr(3b 00 )
DLINP NOTICE simtrace2_api.c:284 [0] <= _modem_reset(asserted=2,
pulse_ms=300)
DLINP NOTICE simtrace2_api.c:250 [0] <=
osmo_st2_cardem_request_set_atr(3b 9f 96 80 1f 87 80 31 e0 73 fe 21 1b
67 4a 4c 75 30 34 05 4b a9 )
USB OUT transfer failed, status=2
output bankd:
Jun 27 13:20:08 debian osmo-remsim-bankd[433]: 452 DBANKDW INFO
bankd_main.c:639 [000 CONN_CLIENT] slotmap found: C(0:0) -> B(1:0)
Jun 27 13:20:08 debian osmo-remsim-bankd[433]: 452 DBANKDW INFO
bankd_main.c:464 [000 CONN_CLIENT] Changing state to CONN_CLIENT_MAPPED
(timeout=10)
Jun 27 13:20:08 debian osmo-remsim-bankd[433]: 452 DBANKDW INFO
bankd_pcsc.c:267 [000 CONN_CLIENT_MAPPED] Attempting to open PC/SC
context
Jun 27 13:20:08 debian osmo-remsim-bankd[433]: 452 DBANKDW INFO
bankd_pcsc.c:270 [000 CONN_CLIENT_MAPPED] SCardEstablishContext: OK
Jun 27 13:20:08 debian osmo-remsim-bankd[433]: 452 DBANKDW INFO
bankd_pcsc.c:215 [000 CONN_CLIENT_MAPPED] Attempting to find card/slot
using regex 'SCM Microsystems Inc\. SCR 3310 \[CCID Int>
Jun 27 13:20:08 debian osmo-remsim-bankd[433]: 452 DBANKDW INFO
bankd_pcsc.c:234 [000 CONN_CLIENT_MAPPED] Attempting to open card/slot
'SCM Microsystems Inc. SCR 3310 [CCID Interface] (53311>
Jun 27 13:20:09 debian osmo-remsim-bankd[433]: 452 DBANKDW INFO
bankd_pcsc.c:198 [000 CONN_CLIENT_MAPPED] SCardStatus: OK
Jun 27 13:20:09 debian osmo-remsim-bankd[433]: 452 DBANKDW INFO
bankd_pcsc.c:200 [000 CONN_CLIENT_MAPPED] Card ATR:
3b9f96801f878031e073fe211b674a4c753034054ba9
Jun 27 13:20:09 debian osmo-remsim-bankd[433]: 452 DBANKDW INFO
bankd_main.c:456 [000 CONN_CLIENT_MAPPED] Changing state to
CONN_CLIENT_MAPPED_CARD
Jun 27 13:20:09 debian osmo-remsim-bankd[433]: 452 DBANKDW INFO
bankd_main.c:794 [000 CONN_CLIENT_MAPPED_CARD] Rx RSPRO setAtrRes
I hope the information provided in this mail is sufficient. If not, I
am happy to provide what is needed in order to solve the issue.
Kind regards
Lorenz Dumanski
[please follow-up-to openbsc(a)lists.osmocom.org so we don't cross-post
all related mails]
Dear Osmocom community,
OsmoDevCall used to be rather successful for quite some time in recent years,
but recently has been suffering quite a bit due to insufficient people
volunteering to present. Big thanks to all who did! Interestingly,
there's no shortage of ideas of topics at
https://osmocom.org/projects/osmo-dev-con/wiki/OsmoDevCall - but then
many of the potential speakers did not have the interest or time to
follow-up.
Most recently, the last few instances have not been taking place due to a lack
of volunteers during my holidays.
Last, but not least, while during COVID lockdown winter "friday night
8pm" was a good idea, this of course is more difficult during the
summer, when people are more likely want to go out the weekend.
So, to summarize, let me ask some questions:
* would you be interested in OsmoDevCall continuing?
* which day/time/timezone would you prefer ?
* would you be able and willing to volunteer to give at talk within the
next 3 or so months?
Any other suggestions for or around OsmoDevCall are of course also welcome.
Thanks in advance,
Harald
--
- Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)
Hi,
I was trying to install a custom applet on sysmoUSIM-SJS1 SIM cards.
Following the guide present here
<https://osmocom.org/projects/sim-toolkit/wiki> and using shadysim I was
not able to do that ( it gives me an error related to the fact it doesn't
receive any status word back after sending an APDU, I think it's a bug but
we can discuss about that later). I ended up using Global Platform Pro to
install it but it only loads the applet on the card as a module of another
package and doesn't make it selectable.
I also tried to upload the applet suggested by you in the guide, but I got
same result.
Is it something related to the sim card? Should I buy the SJA2 version? Can
you help me?
Thanks,
Matteo
