Hello
I use SImtrace for developing and debugging Java SIM Applet.
The device is pretty good, but there are some APDU errors while SIM
sniffing.
is it possible to fix APDU errors sniffing errors?
I am attaching example dump with errors.
Some times, simtrace stop receiving APDU and continue just after
restart simtrace process.
--
Fedorov Alexander
Head of IT-solution department
LLC "Svyazcom"
Mobile: +7-908-212-98-05http://www.svyazcom.ru/en/E-mail:wind3style@gmail.com
<http://www.svyazcom.ru>
Dear Osmocom,
I have a question about the latest build of the simtrace2 based on the AT91SAM3..
Currently we have assembled some boards based on the v1.5 design of the Simtracer received from the git repository git.osmocom.org/simtrace (branch v1.5)
If have tried to compile the firmware of the repository git.osmocom.org/simtrace2 But I run in to some issue after the firmware is loaded.
Also I am not able to find the simtrace2 tool to do simtracing after compilation in the host directory ..
Is this firmware working already ? (The website @sysmocom says "SIMtrace 2" will be available from late March 2018)
Or am I missing something ?
Thanks in advance..
Met vriendelijke groet/С наилучшими пожеланиями/With kind regards,
[V-Tell]
Gerard Bakker | ICT / Voice Engineer
V-Tell Netherlands
Glotell Telecom B.V.
NL-Office +31 63 513 51 23
Willem Dreeslaan 37
NL-Mobile +31 64 202 21 06
2729 ND Zoetermeer, NL
RU-Mobile +7 958 964 19 98
www.v-tell.nl<http://www.v-tell.nl/>
US-Mobile +1 202 370 70 38
gerard.bakker(a)v-tell.nl<mailto:gerard.bakker@v-tell.nl>
This message contains confidential information and is intended only for the individual named. Its content may not be disclosed, copied or transferred to any (third) party in whole or in part without the prior written permission of Glotell B.V. Please notify the sender immediately if you have received this email by mistake and delete this email from your system.
Please do not print this email unless it is necessary. It helps to keep the environment forested and litter-free.
Dears,
I have received SIMTrace 2 just now and I tried to connect it to PC with
the same parameter as for previous version of SIMTrace.
But I found that USB VENDOR ID and USB PRODUCT ID were changed. For the
previous version they were 0x16c0 and 0x0762 correspondingly.
All host sources at git://git.osmocom.org/simtrace.git repository use
this parameters.
Now I can see that VENDOR ID is 0x1d50 and PRODUCT ID is 0x60e3.
Could you please help me to find USB connectivity parameters for the
SIMTrace device which I received?
--
/Best regards,
Andrei Mikhailov
/
I noticed the modem issued command with CLA 0 (usim) or a0 (gsm)... just wondering what cause it to use 0 or a0??? Or does it try different CLA automatically
