*Holger Hans Peter Freyther* holger at freyther.de
<simtrace%40lists.osmocom.org?Subject=Re%3A%20Incomplete%20trace%20%28due%20to%20high-speed%20SIM%3F%29&In-Reply-To=%3C20130522102301.GP14728%40xiaoyu.lan%3E>
*Wed May 22 12:23:01 CEST 2013*
| On Tue, May 21, 2013 at 03:53:45PM +0200, Arthur Léna wrote:
| >* I tried booting the iPhone using 2 different SIMs (this one from *
| >* Free Mobile and another one) and the trace seems very short using
| *>* the Free Mobile in comparison to the other one. By parsing the ATRs
| *>* of both SIMs, I found out that the communication is done at 312500
| *>* bits/s with the Free Mobile SIM and only 78125 bits/s (for a clock
| *>* running at 5MHz). Could this explain the loss of entire ADPUs by the *
| >* tracer? If yes, is there a way to remedy to this problem (firmware *
| >* update for example).
*| Some people reported success by reducing the size of buffered bytes in
the
| firmware.
| holger
Holger
There appears to be numerous references to "decrease the buffer in the
firmware" to workaround the problem of losing bytes... but
can you clarify which buffer to decrease, in which source file?
I am guessing it's the req_ctx.c / req_ctx.h?
Thanks
Dear list,
I would like to ask the currently status of MITM implementation on SIMtrace?
On some prior postings on the list I found about some previous works on it:
git://git.gnumonks.org/at91work.githttps://github.com/zwizwa/at91work/tree/apdu_phone
I am also intresting in turning
the simtrace into a
USB CCID based smart card reader in order to use
http://openbsc.osmocom.org/trac/wiki/osmo-sim-auth with the SIMtrace.
In the usb-device-ccid-project directory when I am trying to use "make" i am getting the following error:
user@ubuntu:~/at91work/usb-device-ccid-project$ make
cc -g -Os -I../at91lib/boards/simtrace -I../at91lib/peripherals -I../at91lib/components -I../at91lib -Dat91sam7s128 -D__ASSEMBLY__ -Dflash_dfu -c -o obj/flash_dfu_board_cstartup.o ../at91lib/boards/simtrace/board_cstartup.S
../at91lib/boards/simtrace/board_cstartup.S: Assembler messages:
../at91lib/boards/simtrace/board_cstartup.S:55: Error: unknown pseudo-op: `.arm'
../at91lib/boards/simtrace/board_cstartup.S:137: Error: no such instruction: `ldr r4,=_sstack'
../at91lib/boards/simtrace/board_cstartup.S:138: Error: too many memory references for `mov'
../at91lib/boards/simtrace/board_cstartup.S:139: Error: no such instruction: `ldr r0,=LowLevelInit'
../at91lib/boards/simtrace/board_cstartup.S:140: Error: too many memory references for `mov'
../at91lib/boards/simtrace/board_cstartup.S:141: Error: no such instruction: `bx r0'
../at91lib/boards/simtrace/board_cstartup.S:144: Error: no such instruction: `ldr r0,=_efixed'
../at91lib/boards/simtrace/board_cstartup.S:145: Error: no such instruction: `ldr r1,=_srelocate'
../at91lib/boards/simtrace/board_cstartup.S:146: Error: no such instruction: `ldr r2,=_erelocate'
../at91lib/boards/simtrace/board_cstartup.S:148: Error: too many memory references for `cmp'
../at91lib/boards/simtrace/board_cstartup.S:149: Error: no such instruction: `ldrcc r3,[r0],'
../at91lib/boards/simtrace/board_cstartup.S:150: Error: no such instruction: `strcc r3,[r1],'
../at91lib/boards/simtrace/board_cstartup.S:151: Error: no such instruction: `bcc 1b'
../at91lib/boards/simtrace/board_cstartup.S:154: Error: no such instruction: `ldr r0,=_szero'
../at91lib/boards/simtrace/board_cstartup.S:155: Error: no such instruction: `ldr r1,=_ezero'
../at91lib/boards/simtrace/board_cstartup.S:156: Error: expecting operand after ','; got nothing
../at91lib/boards/simtrace/board_cstartup.S:158: Error: too many memory references for `cmp'
../at91lib/boards/simtrace/board_cstartup.S:159: Error: no such instruction: `strcc r2,[r0],'
../at91lib/boards/simtrace/board_cstartup.S:160: Error: no such instruction: `bcc 1b'
../at91lib/boards/simtrace/board_cstartup.S:176: Error: no such instruction: `ldr r0,=main'
../at91lib/boards/simtrace/board_cstartup.S:177: Error: too many memory references for `mov'
../at91lib/boards/simtrace/board_cstartup.S:178: Error: no such instruction: `bx r0'
../at91lib/boards/simtrace/board_cstartup.S:182: Error: no such instruction: `b 1b'
make: *** [obj/flash_dfu_board_cstartup.o] Error 1
Thanks for any replies and for your time
With Best regards
Stathis
