simtrace

simtrace@lists.osmocom.org

347 discussions

simtrace2 flash firmware images issue
by 雪碧 0xroot 16 Jun '20

16 Jun '20

Hi community: when i try to flash firmware images from https://ftp.osmocom.org/binaries/simtrace2/firmware/latest/simtrace-dfu-fla… simtrace2-sniff doesn't work. sudo bossac --port=/dev/ttyACM0 --usb-port=1 --erase --verify --boot=1 --write simtrace-dfu-flash-latest.bin Erase flash Done in 0.013 seconds Write 15880 bytes to flash (63 pages) [==============================] 100% (63/63 pages) Done in 0.604 seconds Verify 15880 bytes of flash [==============================] 100% (63/63 pages) Verify successful Done in 0.474 seconds Set boot flash true $ lsusb Bus 003 Device 030: ID 1d50:60e3 OpenMoko, Inc. $sudo ./simtrace2-list USB matches: 1 1d50:60e3 Addr=30, Path=3-2, Cfg=2, Intf=0, Alt=0: 255/255/0 (0.7.0.60-859f) $ sudo ./simtrace2-sniff simtrace2-sniff - Phone-SIM card communication sniffer (C) 2010-2017 by Harald Welte <laforge(a)gnumonks.org> (C) 2018 by Kevin Redon <kredon(a)sysmocom.de> No compatible USB devices found: Resource temporarily unavailable sudo dfu-util --list dfu-util 0.8 Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc. Copyright 2010-2014 Tormod Volden and Stefan Schmidt This program is Free Software and has ABSOLUTELY NO WARRANTY Please report bugs to dfu-util(a)lists.gnumonks.org Found DFU: [1d50:60e3] ver=0000, devnum=30, cfg=1, intf=0, alt=2, name="not available", serial="51203120395134503230333139303033" Found DFU: [1d50:60e3] ver=0000, devnum=30, cfg=1, intf=0, alt=1, name="Flash (Application Partition)", serial="51203120395134503230333139303033" Found DFU: [1d50:60e3] ver=0000, devnum=30, cfg=1, intf=0, alt=0, name="RAM", serial="51203120395134503230333139303033" What should I do?

3 3

simtrace2 build failures on Ubuntu 16.04 (i586 + x86_64)
by Harald Welte 12 Dec '19

12 Dec '19

Hi! I currently haven't yet had time to investigate those. If anyone has clues as to what's going on there, I'd appreciate it. Regards, Harald -- - Harald Welte <laforge(a)osmocom.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)

1 0

OsmoDevCon 2020 registration
by Harald Welte 01 Dec '19

01 Dec '19

Dear fellow Osmocom developers, I would like to invite all developers and contributors to Osmocom [sub]projects to register for OsmoDevCon 2020 (held on April 24th-27th, 2020 in Berlin). For details known so far, please check http://osmocom.org/projects/osmo-dev-con/wiki/OsmoDevCon2020 Please enter your name at https://osmocom.org/projects/osmo-dev-con/wiki/OsmoDevCon2020#Requested in case you would like to attend. Registering early allows proper planning. Thanks! Looking forward to meeting old and new Osmocom developers in April 2020. Regards, Harald -- - Harald Welte <laforge(a)osmocom.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)

1 0

Error while installing SIMtrace 2 host PC software
by Сергей Туб 22 Nov '19

22 Nov '19

Hello.I have Ubuntu 18.04 LTS on VirtualBox. And I need to install SIMtrace 2 host PC software. I use this instruction https://osmocom.org/progects/simtrace2/wiki *Preconditions* libosmocore, libpcsclite and libusb. to install those packages: sudo apt-get install libusb-1.0-0-dev libosmocore-dev libpcsclite-dev *Compiling it*: git clone git://git.osmocom.org/simtrace2.git cd simtrace2/host/ make ...and when I do *make* I get such mistake: cc -Wall -g pkg-config --cflags libusb-1.0 libosmocore -o simtrace2-remsim.o -c simtrace2-remsim.c simtrace2-remsim.c:51:10: fatal error: osmocom/sim/class_tables.h: No such file or directory #include ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. Makefile:21: recipe for target 'simtrace2-remsim.o' failed make: *** [simtrace2-remsim.o] Error 1 Can you explaine me what went wrong? -- Best regards, Serjio. Kyiv, Ukraine

2 1

SIM trace
by Vineet 20 Nov '19

20 Nov '19

Hello team, I am looking to buy a SIM trace tool for my project. I am a freelancer. Could you please provide more details about this? Location: Singapore Also provide the details about the support. What all mobile phones could be supported and all. Also please provide the quotation for the same. Thanks! Vineet Saxena

1 0

Problem with QMOD, Telit Modem and ofono
by KageDS 15 Oct '19

15 Oct '19

Hello list, I seem to be hitting a strange problem trying to use a sysmoQMOD with Ofono and a Telit Modem (HE910) There seems to be a window of around 30 seconds after starting osmo-remsim-client-st2 whereby ofono cannot talk to the modem. There is no response to any AT commands on either the Modem or the Aux port. After about 30 to 40 secs AT commands start working again and I can enable the modem. It seems that switching from physical SIM to remote SIM causes the modem to lock-up for a while. Anyone else seeing a similar issue? I've upgraded the firmware to the latest (0.5.1.24-bb9b0) but it make no difference. Regards Alan Here is a debug log of the firmware with my notes: .... *Power on board* .... ============================================================================= SIMtrace2 firmware 0.5.1.24-bb9b0 (C) 2010-2016 by Harald Welte ============================================================================= -I- Chip ID: 0x28900960 (Ext 0x00000000) -I- Serial Nr. 51203120-39513450-32303031-32333037 -I- Reset Cause: general reset (first power-up reset) -I- Detected Quad-Modem ST12 -I- VERSION_DET ADC=3731 => 3003455 uVund -I- USB init... USBD_Init Std gDesc Dev Std sAddr SetAddr(16) Std gDesc Dev Std gDesc Qua -W- Sta 0x888A8. -I- calling init of config 1... -I- 536881924: CLK activateda work-around -I- Modem 0: physical SIM -I- 0: Use local/physical SIM -I- Modem 1: physical SIM -I- 1: Use local/physical SIM -I- entering main loop... -I- 0: Card Detect Status -1 -> 0 -I- 1: Card Detect Status -1 -> 0 -I- USB is now configured -I- 1: VCC activated -I- 1: CLK activated -I- 1: CLK deactivated -I- 1: VCC deactivated -I- 1: VCC activated -I- 1: CLK activated -I- 1: CLK deactivated -I- 1: VCC deactivated -I- 0: VCC activated -I- 0: CLK activated -I- 0: CLK deactivated -I- 0: VCC deactivated -I- 0: VCC activated -I- 0: CLK activated -I- 0: CLK deactivated -I- 0: VCC deactivated ... *AT commands working fine here* ... Start osmo-remsim-client-st2 ..... Std sInterface -W- Sta 0x88828 [0] -W- _ Std cFeat Hlt Std cFeat Hlt Std cFeat D -I- Modem 0: virtual SIM -I- 0: Use remote/emulated SIM -I- 0: ATR set: 3b 00 -I- 0: Asserting modem reset -I- 0: De-asserting modem reset -I- 0: RST released -I- 0: RST asserted -I- 0: VCC activated -I- 0: CLK activated -I- 0: RST released -I- 0: computed Fi(1) Di(1) ratio: 372 -I- 0: send_tpdu_header: 00 a4 00 0c 02 -I- 0: flush_rx_buffer (5) -I- 0: flush_rx_buffer (2) ... *AT commands no longer work, no response to AT[CR]* ... NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNd -I- 0: CLK deactivated -I- 0: VCC deactivated -I- 0: RST released -I- 0: RST asserted -I- 0: VCC activated -I- 0: CLK activated -I- 0: RST released -I- 0: computed Fi(1) Di(1) ratio: 372 -I- 0: send_tpdu_header: 00 a4 00 0c 02 -I- 0: flush_rx_buffer (5) -I- 0: flush_rx_buffer (2) ... *AT commands still not working* ... NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNd -I- 0: CLK deactivated -I- 0: VCC deactivated -I- 0: RST released -I- 0: RST asserted -I- 0: VCC activated -I- 0: CLK activated -I- 0: RST released -I- 0: computed Fi(1) Di(1) ratio: 372 -I- 0: send_tpdu_header: 00 a4 00 0c 02 -I- 0: flush_rx_buffer (5) ... *AT Commands start working again here* ... NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNd

2 3

Simtrace not responding
by super sad 07 Oct '19

07 Oct '19

Hello, We have simtrace v2. When we connect the device through USB to a laptop it does not respond. None of the lights turn on. It does not respond to any commands. ./simtrace2-lists shows Device = 0. Can you give us some suggestions on how to use the device and if this is the normal behavior? Thank you for your time.

2 2

osmo-remsim project
by Sam québec 05 Sep '19

05 Sep '19

Hi All, I'm interested by the osmo-remsim project. Please is there a tutorial/guidelines for making a demo of remote SIM based on SIMtrace2 board or other ARM Cortex M3 boards? Thank you for your time, Best regards, Sam

1 1

Issue compiling simtrace branch firmware for simtrace2
by hugh 25 Jul '19

25 Jul '19

Hi, Firstly - I am able to compile, flash and run the master branch of the software on my simtrace2 hardware without issues - thanks to all concerned. I wanted to try out the mitm and ccid with my simtrace2, and I *think* that the laforge/cleanup branch is the most recently worked on branch of developmental code, so I tried to compile that and ran into problems. So far I have noticed two issues: 1. Errors like this: error: implicit declaration of function 'board_exec_dbg_cmd'; (which can be changed to a warning by removing the -Werror-implicit-function-declaration in the Makefile) 2. This error: src_simtrace/main.c:81:40: error: 'PIN_PRTPWR_OVERRIDE' undeclared here ... (This error appears hard, as PIN_PRTPWR_OVERRIDE is only in include_board/qmod/board.h, and not in include_board/simtrace/board.h) I guess I am doing something silly - but I just cannot see it. Can someone help? By the way - am I correct in thinking that laforge/cleanup is the most recent/most worked on MITM code for the simtrace2? Cheers Hugh

2 1

IMEI filtering
by Emre Geckin 25 Jul '19

25 Jul '19

I would like to know How sim card is requesting IMEI from mobile device and is it protected only by CHV ? If so can I filter communication and change my mobile device IMEI number to something else ? Thanks.

3 2

← Newer
1
...
9
10
11
12
13
14
15
...
35
Older →

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

simtrace