simtrace

simtrace@lists.osmocom.org

346 discussions

Beginner: Need guidence in setting up the simtracer 2
by Sunil Hebbur Srikantamurthy 16 May '19

16 May '19

Hello all, I have newly ordered the Simtracer 2. I have received the same today. I would like to have some guidence from you, how to proceed now. Should I load a firmware on the module?, which software should I use? how to track the message exchanges from the sim to mobile. There are several manuals, could u please tell which one to read? Could you please guide me on the same. Best regards, M.Sc. Sunil Hebbur Srikantamurthy Chair of Communication Networks Electrical Engineering and Information Technology Chemnitz University of Technology

4 7

Is the sysmoQMOD h/w available for purchase?
by KageDS 16 Apr '19

16 Apr '19

Hello list, Does anyone know if the SysmoQMOD h/w is available to purchase? (https://www.sysmocom.de/products/sysmoqmod/index.html) I looked on the sysmocom web shop but it doesn't appear to be listed. Thanks in advance Alan --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

3 2

Sim tracer with samsung galaxy S9 (nano sim)
by Sunil Hebbur Srikantamurthy 22 Feb '19

22 Feb '19

Hello, I am planning to use the nano sim based mobile phone. Could you please tell me if its possible to use the SIM TRACER for the same. For example samsung galaxy S9. By looking at the wiki I see the sim tracer would fit in for standard sim slot, will the end point of the flex PCB fit the nano sim holder of S9 ?. Could any one please guide me on the same. Best regards, Sunil

3 3

SimTrace2 hardware "Cannot read string:"
by Ken-Tristan Peterson 31 Jan '19

31 Jan '19

Hello Osmocom community, My hardware arrived and was exited to test it out. But I get an error message: "Cannot read string: Resource temporarily unavailable". This happens when I run commands "./simtrace2-list" and "./simtrace2-sniff". List command lists devices nicely. Sniff command enters main loop but no communication is sniffed. Have attached also a screenshot below. But it happens 50% of the time, other than that it might start without the warning message but does not track any communication from the SIM. The SIM works nicely through SimTrace2 hardware, but sniffing does not. I have made sure to follow the steps in Wiki and made sure that the permissions are granted. Help appreciated, Ken-Tristan Peterson IoT Hacker & Community Manager Mobile: +372 53 331 735 kentristan.peterson(a)1oT.mobi <https://1ot.mobi/>

1 0

OsmoDevCon 2019 registration
by Harald Welte 31 Dec '18

31 Dec '18

Dear fellow Osmocom developers, I'm a bit surprised to notice that not more people have signed up for OsmoDevCon 2019. I guess it was mostly an oversight when the date was originally announced, and not a lack of interest? ;) All details about the event are available at the related wiki page at: https://osmocom.org/projects/osmo-dev-con/wiki/OsmoDevCon2019 Please enter your name at https://osmocom.org/projects/osmo-dev-con/wiki/OsmoDevCon2019#Requested in case you would like to attend. Registering early allows proper planning. Thanks! Looking forward to meeting old and new Osmocom developers in April 2019. Regards, Harald -- - Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)

1 0

OsmoDevCon 2019 date poll
by Harald Welte 24 Oct '18

24 Oct '18

Dear all, I would like to get your input as to when we should schedule OsmoDevCon 2019. NOTE: OsmoDevCon is our "for developers by developers" event, not to be confused with OsmoCon, our public conference. If we want to stay with the usual "Friday through Monday in April" arrangement, we have the following options: April 05-08, 2019 April 12-15, 2019 April 26-29, 2019 The one missing weekend in the list above is the easter weekend, which is probably a good idea to exclude as flights and hotels are more expensive during that time, and people might have other plans during holidays. I would like to invite anyone planning to attend the Osmocom Developer Conference 2019 to participate in the poll at https://dudle.inf.tu-dresden.de/OsmoDevCon2019/ to state their availability/preference. The Dudle only shows the first day of the four days of OsmoDevCon. Looking forward to your feedback so we can settle on a date soon. Thanks! Kind regards, Harald -- - Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)

1 0

Fwd: SIMtrace
by Александр Федоров 26 Sep '18

26 Sep '18

-- Fedorov Alexander Mobile: +7-908-212-98-05https://www.linkedin.com/in/wind3style/ <http://www.svyazcom.ru/en/>E-mail:wind3style@gmail.com <http://www.svyazcom.ru> ---------- Forwarded message --------- From: Александр Федоров <wind3style(a)gmail.com> Date: ср, 26 сент. 2018 г. в 17:59 Subject: SIMtrace To: <hwelte(a)hmw-consulting.de> Hello Harald! I am writing to you from far Siberia. I use SIMtrace v1 and I have some problem. Could you halp me? firmware v0.5 lose data and data in Wireshark isn't corrected: [image: image.png] Can I resolve my problem on V1 Simtrace or I have to buy SIMtrace V2? last version firmware from repository doesn't work correctly at all by looping this DEBUG text: [000001] (C) 2006-2011 by Harald Welte <hwelte(a)hmw-consulting.de> This software is FREE SOFTWARE licensed under GNU GPL [000002] Version 0.5.27-5a40-dirty compiled 20180926-170104 by xmobi@xmobi-B250M-DS3H [000003] DEBUG Interface: 0) Set Pull-up 1) Clear Pull-up 2) Toggle LED1 3) Toggle LED2 9) Reset [000004] RSTC_SR=0x00010200 [000005] LARGE req_ctx[00] initialized at 002055AC, Data: 00200A68 => 00200E28 [000006] LARGE req_ctx[01] initialized at 002055C0, Data: 00200E28 => 002011E8 [000007] LARGE req_ctx[02] initialized at 002055D4, Data: 002011E8 => 002015A8 [000008] LARGE req_ctx[03] initialized at 002055E8, Data: 002015A8 => 00201968 [000009] LARGE req_ctx[04] initialized at 002055FC, Data: 00201968 => 00201D28 [00000A] LARGE req_ctx[05] initialized at 00205610, Data: 00201D28 => 002020E8 [00000B] LARGE req_ctx[06] initialized at 00205624, Data: 002020E8 => 002024A8 [00000C] LARGE req_ctx[07] initialized at 00205638, Data: 002024A8 => 00202868 [00000D] LARGE req_ctx[08] initialized at 0020564C, Data: 00202868 => 00202C28 [00000E] LARGE req_ctx[09] initialized at 00205660, Data: 00202C28 => 00202FE8 [00000F] LARGE req_ctx[10] initialized at 00205674, Data: 00202FE8 => 002033A8 [000010] LARGE req_ctx[11] initialized at 00205688, Data: 002033A8 => 00203768 [000011] LARGE req_ctx[12] initialized at 0020569C, Data: 00203768 => 00203B28 [000012] LARGE req_ctx[13] initialized at 002056B0, Data: 00203B28 => 00203EE8 [000013] LARGE req_ctx[14] initialized at 002056C4, Data: 00203EE8 => 002042A8 [000014] LARGE req_ctx[15] initialized at 002056D8, Data: 002042A8 => 00204668 [000015] LARGE req_ctx[16] initialized at 002056EC, Data: 00204668 => 00204A28 [000016] LARGE req_ctx[17] initialized at 00205700, Data: 00204A28 => 00204DE8 [000017] LARGE req_ctx[18] initialized at 00205714, Data: 00204DE8 => 002051A8 [000018] LARGE req_ctx[19] initialized at 00205728, Data: 002051A8 => 00205568 [000019] Inititalizing usbcmd_gen_init [00001A] udp_open(440): entering [00001B] USART Initializing [00001C] pio_irq_register(109): registering handler 001079bc for PIOA 7 [00001D] RST [00001E] computed Fi(1) Di(1) ratio: 372 -- Fedorov Alexander Mobile: +7-908-212-98-05https://www.linkedin.com/in/wind3style/ <http://www.svyazcom.ru/en/>E-mail:wind3style@gmail.com <http://www.svyazcom.ru>

4 3

SIM trace.
by Александр Федоров 26 Sep '18

26 Sep '18

Hello I use SImtrace for developing and debugging Java SIM Applet. The device is pretty good, but there are some APDU errors while SIM sniffing. is it possible to fix APDU errors sniffing errors? I am attaching example dump with errors. Some times, simtrace stop receiving APDU and continue just after restart simtrace process. -- Fedorov Alexander Head of IT-solution department LLC "Svyazcom" Mobile: +7-908-212-98-05http://www.svyazcom.ru/en/E-mail:wind3style@gmail.com <http://www.svyazcom.ru>

2 1

AT91SAM3 Based simtracer and firmware
by Gerard Bakker 26 Sep '18

26 Sep '18

Dear Osmocom, I have a question about the latest build of the simtrace2 based on the AT91SAM3.. Currently we have assembled some boards based on the v1.5 design of the Simtracer received from the git repository git.osmocom.org/simtrace (branch v1.5) If have tried to compile the firmware of the repository git.osmocom.org/simtrace2 But I run in to some issue after the firmware is loaded. Also I am not able to find the simtrace2 tool to do simtracing after compilation in the host directory .. Is this firmware working already ? (The website @sysmocom says "SIMtrace 2" will be available from late March 2018) Or am I missing something ? Thanks in advance.. Met vriendelijke groet/С наилучшими пожеланиями/With kind regards, [V-Tell] Gerard Bakker | ICT / Voice Engineer V-Tell Netherlands Glotell Telecom B.V. NL-Office +31 63 513 51 23 Willem Dreeslaan 37 NL-Mobile +31 64 202 21 06 2729 ND Zoetermeer, NL RU-Mobile +7 958 964 19 98 www.v-tell.nl<http://www.v-tell.nl/> US-Mobile +1 202 370 70 38 gerard.bakker(a)v-tell.nl<mailto:gerard.bakker@v-tell.nl> This message contains confidential information and is intended only for the individual named. Its content may not be disclosed, copied or transferred to any (third) party in whole or in part without the prior written permission of Glotell B.V. Please notify the sender immediately if you have received this email by mistake and delete this email from your system. Please do not print this email unless it is necessary. It helps to keep the environment forested and litter-free.

2 1

Debian/Ubuntu packages for simtrace2
by Harald Welte 26 Aug '18

26 Aug '18

Dear all, I've just merged changes that will automatically build the latest (tagged version) packages and nightly packages for simtrace2.git for firmware and host utilities. The "latest" have already been triggered: https://build.opensuse.org/package/show/network:osmocom:latest/simtrace2 "nightly" will be available after the next automatic build (7:49 PM UTC) For more information about osmocom nightly and latest binary packages, see https://osmocom.org/projects/cellular-infrastructure/wiki/Binary_Packages Regards, Harald -- - Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)

1 0

← Newer
1
...
10
11
12
13
14
15
16
...
35
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

simtrace