Hello,
I have a functioning setup of remsim as follow:
* An x86 server that hosts a sysmoOCTSIM board. This server runs the bank daemon and also the remsim server.
* An ARM64 client that hosts a SIMtrace2 board, and a 5G modem with two SIM inputs to support dual SIM single standby (DSSS). The SIMtrace2 connects to SIM slot 0 on the 5G modem via a flexi.
* I use the remsim-apitool to create the slot map and assign SIMs to the client using the server IP, bank ID and client ID. Client slot is always 0.
I’d like to allocate two SIMs in the bank to this one client using only one ATSAM4S microcontroller to utilise the DSSS function of the modem e.g. SIM slot 1 in the bank is mapped to SIM slot 0 on the 5G modem for client ID 1. SIM slot 2 in the bank is mapped to SIM slot 1 on the same 5G modem for client ID 1. Is this possible with the current implementation of remsim? I cannot find any reference to this in the archives or in the manuals.
Thanks
The contents of this e-mail are confidential and for the exclusive use of the intended recipient. If you are not the intended recipient you should not read, copy, retransmit or disclose its contents. If you have received this email in error please delete it from your system immediately and notify us either by email or telephone. The views expressed in this communication may not necessarily be the views held by McLaren Applied Limited.
Dukes Court, Block E, Duke Street, Woking, GU21 5BH, United Kingdom Company Number: 02322992
