January 2026 - gerrit-log - lists.osmocom.org

[XS] Change in osmo-bts[master]: ta_control: Reset state during lchan deactivation
by fixeria 09 Jan '26

09 Jan '26

Attention is currently required from: pespin. fixeria has posted comments on this change by pespin. ( https://gerrit.osmocom.org/c/osmo-bts/+/41791?usp=email ) Change subject: ta_control: Reset state during lchan deactivation ...................................................................... Patch Set 2: Code-Review+1 -- To view, visit https://gerrit.osmocom.org/c/osmo-bts/+/41791?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: osmo-bts Gerrit-Branch: master Gerrit-Change-Id: I2aacbbc5b2db46c17b1266b5b5e84d8286d0cf83 Gerrit-Change-Number: 41791 Gerrit-PatchSet: 2 Gerrit-Owner: pespin <pespin(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Attention: pespin <pespin(a)sysmocom.de> Gerrit-Comment-Date: Fri, 09 Jan 2026 13:42:19 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes

1 0

[S] Change in osmo-bts[master]: ta_control: Fix skip_block_num not reset when switching TS to PDCH
by fixeria 09 Jan '26

09 Jan '26

Attention is currently required from: jolly, laforge, pespin. fixeria has posted comments on this change by pespin. ( https://gerrit.osmocom.org/c/osmo-bts/+/41790?usp=email ) Change subject: ta_control: Fix skip_block_num not reset when switching TS to PDCH ...................................................................... Patch Set 2: Code-Review+1 (1 comment) File src/common/ta_control.c: https://gerrit.osmocom.org/c/osmo-bts/+/41790/comment/f617d82b_38c0a0dc?usp… : PS1, Line 52: lchan->ta_ctrl.skip_block_num = lchan->ts->trx->ta_ctrl_interval * 2 - 1; > We may actually want to do "lchan->ta_ctrl. […] Ack, makes sense. -- To view, visit https://gerrit.osmocom.org/c/osmo-bts/+/41790?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: osmo-bts Gerrit-Branch: master Gerrit-Change-Id: Id3e81ebec04042dd7d8e4805762e3e518790706d Gerrit-Change-Number: 41790 Gerrit-PatchSet: 2 Gerrit-Owner: pespin <pespin(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: jolly <andreas(a)eversberg.eu> Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Attention: jolly <andreas(a)eversberg.eu> Gerrit-Attention: laforge <laforge(a)osmocom.org> Gerrit-Attention: pespin <pespin(a)sysmocom.de> Gerrit-Comment-Date: Fri, 09 Jan 2026 13:41:15 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: Yes Comment-In-Reply-To: pespin <pespin(a)sysmocom.de>

1 0

[XS] Change in osmo-bts[master]: ta_control: Add missing include for lchan.h
by fixeria 09 Jan '26

09 Jan '26

Attention is currently required from: pespin. fixeria has posted comments on this change by pespin. ( https://gerrit.osmocom.org/c/osmo-bts/+/41789?usp=email ) Change subject: ta_control: Add missing include for lchan.h ...................................................................... Patch Set 1: Code-Review+1 -- To view, visit https://gerrit.osmocom.org/c/osmo-bts/+/41789?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: osmo-bts Gerrit-Branch: master Gerrit-Change-Id: Iea1f7ed303ebd0c12a48bb3edf73a494b8736a39 Gerrit-Change-Number: 41789 Gerrit-PatchSet: 1 Gerrit-Owner: pespin <pespin(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Attention: pespin <pespin(a)sysmocom.de> Gerrit-Comment-Date: Fri, 09 Jan 2026 13:38:39 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes

1 0

[S] Change in osmo-bts[master]: ta_control: Move skip_block logic to helper function
by fixeria 09 Jan '26

09 Jan '26

Attention is currently required from: pespin. fixeria has posted comments on this change by pespin. ( https://gerrit.osmocom.org/c/osmo-bts/+/41787?usp=email ) Change subject: ta_control: Move skip_block logic to helper function ...................................................................... Patch Set 1: Code-Review+1 -- To view, visit https://gerrit.osmocom.org/c/osmo-bts/+/41787?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: osmo-bts Gerrit-Branch: master Gerrit-Change-Id: I174f2f941fbedbe0793cc0b93d01e53e23328cf2 Gerrit-Change-Number: 41787 Gerrit-PatchSet: 1 Gerrit-Owner: pespin <pespin(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Attention: pespin <pespin(a)sysmocom.de> Gerrit-Comment-Date: Fri, 09 Jan 2026 13:38:16 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes

1 0

[XS] Change in osmo-bts[master]: ta_control: Move variable declaration to the top of the function
by fixeria 09 Jan '26

09 Jan '26

Attention is currently required from: pespin. fixeria has posted comments on this change by pespin. ( https://gerrit.osmocom.org/c/osmo-bts/+/41788?usp=email ) Change subject: ta_control: Move variable declaration to the top of the function ...................................................................... Patch Set 1: Code-Review+1 -- To view, visit https://gerrit.osmocom.org/c/osmo-bts/+/41788?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: osmo-bts Gerrit-Branch: master Gerrit-Change-Id: Ia5ada61d74f5b17c4d1479123462104650a6ed0f Gerrit-Change-Number: 41788 Gerrit-PatchSet: 1 Gerrit-Owner: pespin <pespin(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Attention: pespin <pespin(a)sysmocom.de> Gerrit-Comment-Date: Fri, 09 Jan 2026 13:38:02 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes

1 0

[M] Change in osmo-bts[master]: {bs,ms}_power_control: Move params inside lchan_power_ctrl_state
by pespin 09 Jan '26

09 Jan '26

pespin has uploaded a new patch set (#2). ( https://gerrit.osmocom.org/c/osmo-bts/+/41807?usp=email ) Change subject: {bs,ms}_power_control: Move params inside lchan_power_ctrl_state ...................................................................... {bs,ms}_power_control: Move params inside lchan_power_ctrl_state Those fields are also part of the power control state, since they are modified through the lifecycle of the lchan eg. during rx of CHAN (RE)ACT, MS POWER CONTROL, etc. Those should also be reset together with other fields. Moreover, with this patch we get rid of an extra indirection pointer which could be NULL (under static configuration) and hence create potential problems. Change-Id: I0e2a6c2c33e0ac9a0bc1734d83eaeafc27f2f4df --- M include/osmo-bts/lchan.h M src/common/power_control.c M src/common/rsl.c M src/common/vty.c M tests/power/bs_power_loop_test.c M tests/power/ms_power_loop_test.c 6 files changed, 74 insertions(+), 88 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-bts refs/changes/07/41807/2 -- To view, visit https://gerrit.osmocom.org/c/osmo-bts/+/41807?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: newpatchset Gerrit-Project: osmo-bts Gerrit-Branch: master Gerrit-Change-Id: I0e2a6c2c33e0ac9a0bc1734d83eaeafc27f2f4df Gerrit-Change-Number: 41807 Gerrit-PatchSet: 2 Gerrit-Owner: pespin <pespin(a)sysmocom.de> Gerrit-CC: Jenkins Builder

1 0

[M] Change in osmo-bts[master]: {bs,ms}_power_control: Move params inside lchan_power_ctrl_state
by pespin 09 Jan '26

09 Jan '26

pespin has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-bts/+/41807?usp=email ) Change subject: {bs,ms}_power_control: Move params inside lchan_power_ctrl_state ...................................................................... {bs,ms}_power_control: Move params inside lchan_power_ctrl_state Those fields are also part of the power control state, since they are modified through the lifecycle of the lchan eg. during rx of CHAN (RE)ACT, MS POWER CONTROL, etc. Those should also be reset together with other fields. Moreover, with this patch we get rid of an extra indirection pointer which could be NULL (under static configuration) and hence create potential problems. Change-Id: I0e2a6c2c33e0ac9a0bc1734d83eaeafc27f2f4df --- M include/osmo-bts/lchan.h M src/common/power_control.c M src/common/rsl.c M src/common/vty.c M tests/power/bs_power_loop_test.c M tests/power/ms_power_loop_test.c 6 files changed, 76 insertions(+), 87 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-bts refs/changes/07/41807/1 diff --git a/include/osmo-bts/lchan.h b/include/osmo-bts/lchan.h index 42de2f4..2b19c28 100644 --- a/include/osmo-bts/lchan.h +++ b/include/osmo-bts/lchan.h @@ -120,8 +120,9 @@ struct lchan_power_ctrl_state { - /* Dynamic Power Control parameters (NULL in static mode) */ - const struct gsm_power_ctrl_params *dpc_params; + /* Dynamic Power Control parameters (false = static mode) */ + bool dpc_enabled; + struct gsm_power_ctrl_params dpc_params; /* Measurement pre-processing state (for dynamic mode) */ struct gsm_power_ctrl_meas_proc_state rxlev_meas_proc; struct gsm_power_ctrl_meas_proc_state rxqual_meas_proc; @@ -356,10 +357,6 @@ struct lchan_power_ctrl_state ms_power_ctrl; struct lchan_power_ctrl_state bs_power_ctrl; - /* MS/BS Dynamic Power Control parameters */ - struct gsm_power_ctrl_params ms_dpc_params; - struct gsm_power_ctrl_params bs_dpc_params; - /* Temporary ACCH overpower capabilities and state */ struct abis_rsl_osmo_temp_ovp_acch_cap top_acch_cap; bool top_acch_active; diff --git a/src/common/power_control.c b/src/common/power_control.c index 187c5da..7f66dce 100644 --- a/src/common/power_control.c +++ b/src/common/power_control.c @@ -140,13 +140,17 @@ void lchan_ms_pwr_ctrl_reset(struct gsm_lchan *lchan) { struct lchan_power_ctrl_state *state = &lchan->ms_power_ctrl; + struct gsm_power_ctrl_params *params = &state->dpc_params; + struct gsm_bts_trx *trx = lchan->ts->trx; /* This below implicitly sets: - * state->dpc_params = NULL (static mode). + * state->dpc_enabled = false (static mode). * state->skip_block_num = 0, so that 1st power input is taken into account. */ memset(state, 0, sizeof(*state)); - state->max = ms_pwr_ctl_lvl(lchan->ts->trx->bts->band, 0); + memcpy(params, trx->ms_dpc_params, sizeof(*params)); + + state->max = ms_pwr_ctl_lvl(trx->bts->band, 0); /* XXX: should we use the maximum power level instead of 0 dBm? */ state->current = state->max; } @@ -170,7 +174,7 @@ static const struct gsm_power_ctrl_meas_params *lchan_get_ci_thresholds(const struct gsm_lchan *lchan) { - const struct gsm_power_ctrl_params *params = lchan->ms_power_ctrl.dpc_params; + const struct gsm_power_ctrl_params *params = &lchan->ms_power_ctrl.dpc_params; switch (lchan->type) { case GSM_LCHAN_SDCCH: @@ -204,7 +208,7 @@ const int16_t ul_lqual_cb) { struct lchan_power_ctrl_state *state = &lchan->ms_power_ctrl; - const struct gsm_power_ctrl_params *params = state->dpc_params; + const struct gsm_power_ctrl_params *params = &state->dpc_params; struct gsm_bts_trx *trx = lchan->ts->trx; struct gsm_bts *bts = trx->bts; enum gsm_band band = bts->band; @@ -217,7 +221,7 @@ if (!trx_ms_pwr_ctrl_is_osmo(trx)) return 0; - if (params == NULL) + if (!state->dpc_enabled) return 0; /* Average the input RxLev/RxQual samples (if needed). Do this before @@ -327,13 +331,17 @@ void lchan_bs_pwr_ctrl_reset(struct gsm_lchan *lchan) { struct lchan_power_ctrl_state *state = &lchan->bs_power_ctrl; + struct gsm_power_ctrl_params *params = &state->dpc_params; + struct gsm_bts_trx *trx = lchan->ts->trx; /* This below implicitly sets: + * state->dpc_enabled = false (static mode). * state->current = 0 (it's safer to start from 0 unless told differently). - * state->dpc_params = NULL (static mode). * state->skip_block_num = 0, so that 1st power input is taken into account. */ memset(state, 0, sizeof(*state)); + memcpy(params, trx->ms_dpc_params, sizeof(*params)); + state->max = 2 * 15; /* maximum defined in 9.3.4 */ } @@ -345,12 +353,12 @@ const struct gsm48_meas_res *mr) { struct lchan_power_ctrl_state *state = &lchan->bs_power_ctrl; - const struct gsm_power_ctrl_params *params = state->dpc_params; + const struct gsm_power_ctrl_params *params = &state->dpc_params; uint8_t rxqual, rxqual_avg, rxlev, rxlev_avg; int new_att; /* Check if dynamic BS Power Control is enabled */ - if (params == NULL) + if (!state->dpc_enabled) return 0; LOGPLCHAN(lchan, DLOOP, LOGL_DEBUG, "Rx DL Measurement Report: " diff --git a/src/common/rsl.c b/src/common/rsl.c index 3a52167..aadce84 100644 --- a/src/common/rsl.c +++ b/src/common/rsl.c @@ -2062,35 +2062,25 @@ /* 9.3.31 (TLV) MS Power Parameters IE (vendor specific) */ if ((ie = TLVP_GET(&tp, RSL_IE_MS_POWER_PARAM)) != NULL) { - struct gsm_power_ctrl_params *params = &lchan->ms_dpc_params; - /* Parsed parameters will override per-TRX defaults */ - memcpy(params, ts->trx->ms_dpc_params, sizeof(*params)); - - if (ie->len && parse_power_ctrl_params(params, ie->val, ie->len) != 0) { + if (ie->len && parse_power_ctrl_params(&lchan->ms_power_ctrl.dpc_params, ie->val, ie->len) != 0) { LOGPLCHAN(lchan, DRSL, LOGL_ERROR, "Failed to parse MS Power Parameters IE\n"); return rsl_tx_chan_act_nack(lchan, RSL_ERR_IE_CONTENT); } - /* Spec explicitly states BTS should only perform * autonomous MS power control loop in BTS if 'MS Power * Parameters' IE is present! */ - lchan->ms_power_ctrl.dpc_params = params; + lchan->ms_power_ctrl.dpc_enabled = true; } /* 9.3.32 (TLV) BS Power Parameters IE (vendor specific) */ if ((ie = TLVP_GET(&tp, RSL_IE_BS_POWER_PARAM)) != NULL) { - struct gsm_power_ctrl_params *params = &lchan->bs_dpc_params; - /* Parsed parameters will override per-TRX defaults */ - memcpy(params, ts->trx->bs_dpc_params, sizeof(*params)); - - /* Parsed parameters will override per-TRX defaults */ - if (ie->len && parse_power_ctrl_params(params, ie->val, ie->len) != 0) { + if (ie->len && parse_power_ctrl_params(&lchan->bs_power_ctrl.dpc_params, ie->val, ie->len) != 0) { LOGPLCHAN(lchan, DRSL, LOGL_ERROR, "Failed to parse BS Power Parameters IE\n"); return rsl_tx_chan_act_nack(lchan, RSL_ERR_IE_CONTENT); } - lchan->bs_power_ctrl.dpc_params = params; + lchan->ms_power_ctrl.dpc_enabled = true; } /* 9.3.16 Physical Context */ @@ -2561,29 +2551,24 @@ /* Spec explicitly states BTS should only perform autonomous MS Power * control loop in BTS if 'MS Power Parameters' IE is present! */ - lchan->ms_power_ctrl.dpc_params = NULL; + lchan->ms_power_ctrl.dpc_enabled = false; /* 9.3.31 (TLV) MS Power Parameters IE (vendor specific) */ if ((ie = TLVP_GET(&tp, RSL_IE_MS_POWER_PARAM)) != NULL) { - struct gsm_power_ctrl_params *params = &lchan->ms_dpc_params; - + struct gsm_power_ctrl_params *params = &lchan->ms_power_ctrl.dpc_params; /* Parsed parameters will override per-TRX defaults */ memcpy(params, msg->trx->ms_dpc_params, sizeof(*params)); - /* Parsed parameters will override per-TRX defaults */ if (ie->len && parse_power_ctrl_params(params, ie->val, ie->len) != 0) { LOGPLCHAN(lchan, DRSL, LOGL_ERROR, "Failed to parse MS Power Parameters IE\n"); return rsl_tx_chan_act_nack(lchan, RSL_ERR_IE_CONTENT); } - - lchan->ms_power_ctrl.dpc_params = params; + lchan->ms_power_ctrl.dpc_enabled = true; } /* Only set current to max if actual value of current in dBm > value in dBm from max, or if fixed. */ - if (lchan->ms_power_ctrl.dpc_params == NULL) { - lchan->ms_power_ctrl.current = lchan->ms_power_ctrl.max; - } else { + if (lchan->ms_power_ctrl.dpc_enabled) { max_pwr = ms_pwr_dbm(bts->band, lchan->ms_power_ctrl.max); curr_pwr = ms_pwr_dbm(bts->band, lchan->ms_power_ctrl.current); if (max_pwr < 0 || curr_pwr < 0) { @@ -2594,6 +2579,8 @@ } else if (curr_pwr > max_pwr) { lchan->ms_power_ctrl.current = lchan->ms_power_ctrl.max; } + } else { + lchan->ms_power_ctrl.current = lchan->ms_power_ctrl.max; } bts_model_adjst_ms_pwr(lchan); @@ -2648,23 +2635,20 @@ /* 9.3.32 (TLV) BS Power Parameters IE (vendor specific) */ if ((ie = TLVP_GET(&tp, RSL_IE_BS_POWER_PARAM)) != NULL) { - struct gsm_power_ctrl_params *params = &lchan->bs_dpc_params; - + struct gsm_power_ctrl_params *params = &lchan->bs_power_ctrl.dpc_params; /* Parsed parameters will override per-TRX defaults */ memcpy(params, trx->bs_dpc_params, sizeof(*params)); - /* Parsed parameters will override per-TRX defaults */ if (ie->len && parse_power_ctrl_params(params, ie->val, ie->len) != 0) { LOGPLCHAN(lchan, DRSL, LOGL_ERROR, "Failed to parse BS Power Parameters IE\n"); return rsl_tx_chan_act_nack(lchan, RSL_ERR_IE_CONTENT); } - /* NOTE: it's safer to start from 0 */ lchan->bs_power_ctrl.current = 0; lchan->bs_power_ctrl.max = new; - lchan->bs_power_ctrl.dpc_params = params; + lchan->bs_power_ctrl.dpc_enabled = true; } else { - lchan->bs_power_ctrl.dpc_params = NULL; + lchan->bs_power_ctrl.dpc_enabled = false; lchan->bs_power_ctrl.current = new; } diff --git a/src/common/vty.c b/src/common/vty.c index ca7947b..2b18e33 100644 --- a/src/common/vty.c +++ b/src/common/vty.c @@ -1832,11 +1832,11 @@ const struct gsm_bts_trx *trx = lchan->ts->trx; cfg_out(vty, "BS (Downlink) Power Control (%s mode):%s", - st->dpc_params ? "dynamic" : "static", VTY_NEWLINE); + st->dpc_enabled ? "dynamic" : "static", VTY_NEWLINE); indent += 2; cfg_out(vty, "Channel reduction: %u dB", st->current); - if (st->dpc_params != NULL) + if (st->dpc_enabled) vty_out(vty, " (max %u dB)", st->max); vty_out(vty, "%s", VTY_NEWLINE); @@ -1847,11 +1847,11 @@ cfg_out(vty, "Actual / Nominal power: %d dBm / %d dBm%s", actual, trx->nominal_power, VTY_NEWLINE); - if (st->dpc_params == NULL) + if (!st->dpc_enabled) return; cfg_out(vty, "Power Control parameters:%s", VTY_NEWLINE); - dump_dpc_params(vty, indent + 2, st->dpc_params, false); + dump_dpc_params(vty, indent + 2, &st->dpc_params, false); } static void lchan_ms_power_ctrl_state_dump(struct vty *vty, unsigned int indent, @@ -1861,7 +1861,7 @@ const struct gsm_bts_trx *trx = lchan->ts->trx; cfg_out(vty, "MS (Uplink) Power Control (%s):%s", - st->dpc_params ? "dynamic" : "static", VTY_NEWLINE); + st->dpc_enabled ? "dynamic" : "static", VTY_NEWLINE); indent += 2; int current_dbm = ms_pwr_dbm(trx->bts->band, st->current); @@ -1869,15 +1869,15 @@ cfg_out(vty, "Current power level: %u, %d dBm", st->current, current_dbm); - if (st->dpc_params != NULL) + if (st->dpc_enabled) vty_out(vty, " (max %u, %d dBm)", st->max, max_dbm); vty_out(vty, "%s", VTY_NEWLINE); - if (st->dpc_params == NULL) + if (!st->dpc_enabled) return; cfg_out(vty, "Power Control parameters:%s", VTY_NEWLINE); - dump_dpc_params(vty, indent + 2, st->dpc_params, true); + dump_dpc_params(vty, indent + 2, &st->dpc_params, true); } static void lchan_acch_rep_state_dump(struct vty *vty, unsigned int indent, @@ -2603,7 +2603,6 @@ "Enable the power control loop\n", CMD_ATTR_HIDDEN) { - const struct gsm_power_ctrl_params *params; struct lchan_power_ctrl_state *state; const char **args = argv + 4; struct gsm_lchan *lchan; @@ -2614,18 +2613,15 @@ return CMD_WARNING; } - if (strcmp(args[0], "bs-power-ctrl") == 0) { - params = &lchan->bs_dpc_params; + if (strcmp(args[0], "bs-power-ctrl") == 0) state = &lchan->bs_power_ctrl; - } else { /* ms-power-ctrl */ - params = &lchan->ms_dpc_params; + else/* ms-power-ctrl */ state = &lchan->ms_power_ctrl; - } if (strcmp(args[1], "dynamic") == 0) - state->dpc_params = params; + state->dpc_enabled = true; else - state->dpc_params = NULL; + state->dpc_enabled = false; return CMD_SUCCESS; } diff --git a/tests/power/bs_power_loop_test.c b/tests/power/bs_power_loop_test.c index 8fbdcee..3f591ca 100644 --- a/tests/power/bs_power_loop_test.c +++ b/tests/power/bs_power_loop_test.c @@ -106,9 +106,9 @@ g_bts->c0 = g_trx; /* Init defaultBS power control parameters, enable dynamic power control */ - struct gsm_power_ctrl_params *params = &g_trx->ts[0].lchan[0].bs_dpc_params; - g_trx->ts[0].lchan[0].bs_power_ctrl.dpc_params = params; + struct gsm_power_ctrl_params *params = &g_trx->ts[0].lchan[0].bs_power_ctrl.dpc_params; *params = power_ctrl_params_def; + g_trx->ts[0].lchan[0].bs_power_ctrl.dpc_enabled = true; /* Disable loop SACCH block skip by default: */ params->ctrl_interval = 0; @@ -141,35 +141,39 @@ { struct gsm48_meas_res mr; uint8_t old, new; + struct gsm_power_ctrl_params tmp_params; switch (step->type) { case PWR_TEST_ST_SET_STATE: printf("#%02u %s() <- State (re)set (current %u dB, max %u dB)\n", n, __func__, step->state.current, step->state.max); + /* Retain default Dynamic Power Control Parameters, only interested in changing the state here: */ + memcpy(&tmp_params, &lchan->bs_power_ctrl.dpc_params, sizeof(tmp_params)); lchan->bs_power_ctrl = step->state; - lchan->bs_power_ctrl.dpc_params = &lchan->bs_dpc_params; + memcpy(&lchan->bs_power_ctrl.dpc_params, &tmp_params, sizeof(tmp_params)); + lchan->bs_power_ctrl.dpc_enabled = true; return 0; /* we're done */ case PWR_TEST_ST_DISABLE_DPC: printf("#%02u %s() <- Dynamic power control is disabled\n", n, __func__); - lchan->bs_power_ctrl.dpc_params = NULL; + lchan->bs_power_ctrl.dpc_enabled = false; return 0; /* we're done */ case PWR_TEST_ST_SET_CTRL_INTERVAL: printf("#%02u %s() <- (Re)set power control interval: %u -> %u\n", - n, __func__, lchan->bs_dpc_params.ctrl_interval, step->ctrl_interval); - lchan->bs_dpc_params.ctrl_interval = step->ctrl_interval; + n, __func__, lchan->bs_power_ctrl.dpc_params.ctrl_interval, step->ctrl_interval); + lchan->bs_power_ctrl.dpc_params.ctrl_interval = step->ctrl_interval; return 0; /* we're done */ case PWR_TEST_ST_SET_STEP_SIZE: printf("#%02u %s() <- Set step size: inc %u dB, red %u dB\n", n, __func__, step->step_size.inc, step->step_size.red); - lchan->bs_dpc_params.inc_step_size_db = step->step_size.inc; - lchan->bs_dpc_params.red_step_size_db = step->step_size.red; + lchan->bs_power_ctrl.dpc_params.inc_step_size_db = step->step_size.inc; + lchan->bs_power_ctrl.dpc_params.red_step_size_db = step->step_size.red; return 0; /* we're done */ case PWR_TEST_ST_SET_RXLEV_PARAMS: printf("#%02u %s() <- (Re)set RxLev params (thresh %u .. %u, " "averaging is %sabled)\n", n, __func__, step->mp.lower_thresh, step->mp.upper_thresh, step->mp.algo != GSM_PWR_CTRL_MEAS_AVG_ALGO_NONE ? "en" : "dis"); - lchan->bs_dpc_params.rxlev_meas = step->mp; + lchan->bs_power_ctrl.dpc_params.rxlev_meas = step->mp; return 0; /* we're done */ case PWR_TEST_ST_ENABLE_DTXD: printf("#%02u %s() <- Enable DTXd\n", n, __func__); @@ -204,7 +208,7 @@ init_test(name); struct gsm_lchan *lchan = &g_trx->ts[0].lchan[0]; - struct gsm_power_ctrl_params *params = &lchan->bs_dpc_params; + struct gsm_power_ctrl_params *params = &lchan->bs_power_ctrl.dpc_params; /* No RxLev hysteresis: lower == upper */ params->rxlev_meas.lower_thresh = PWR_TEST_RXLEV_TARGET; diff --git a/tests/power/ms_power_loop_test.c b/tests/power/ms_power_loop_test.c index 47df68e..55a70ed 100644 --- a/tests/power/ms_power_loop_test.c +++ b/tests/power/ms_power_loop_test.c @@ -55,9 +55,9 @@ g_bts->c0 = g_trx; /* Init default MS power control parameters, enable dynamic power control */ - struct gsm_power_ctrl_params *params = &g_trx->ts[0].lchan[0].ms_dpc_params; - g_trx->ts[0].lchan[0].ms_power_ctrl.dpc_params = params; + struct gsm_power_ctrl_params *params = &g_trx->ts[0].lchan[0].ms_power_ctrl.dpc_params; *params = power_ctrl_params_def; + g_trx->ts[0].lchan[0].ms_power_ctrl.dpc_enabled = true; /* Disable loop SACCH block skip by default: */ params->ctrl_interval = 0; @@ -98,7 +98,7 @@ init_test(__func__); lchan = &g_trx->ts[0].lchan[0]; - params = lchan->ms_power_ctrl.dpc_params; + params = &lchan->ms_power_ctrl.dpc_params; lchan->type = GSM_LCHAN_SDCCH; good_lqual = (params->ci_sdcch_meas.lower_thresh + 2) * 10; @@ -160,11 +160,11 @@ OSMO_ASSERT(lchan->ms_power_ctrl.max == 0); /* Disable dynamic power control and jump down */ - lchan->ms_power_ctrl.dpc_params = NULL; + lchan->ms_power_ctrl.dpc_enabled = false; apply_power_test(lchan, -60, good_lqual, 0, 14); /* Enable and leave it again */ - lchan->ms_power_ctrl.dpc_params = &lchan->ms_dpc_params; + lchan->ms_power_ctrl.dpc_enabled = true; apply_power_test(lchan, -40, good_lqual, 1, 15); } @@ -178,11 +178,11 @@ init_test(__func__); lchan = &g_trx->ts[0].lchan[0]; lchan->type = GSM_LCHAN_SDCCH; - params = lchan->ms_power_ctrl.dpc_params; + params = &lchan->ms_power_ctrl.dpc_params; good_lqual = (params->ci_sdcch_meas.lower_thresh + 2) * 10; avg100 = &lchan->ms_power_ctrl.rxlev_meas_proc.ewma.Avg100; - struct gsm_power_ctrl_meas_params *mp = &lchan->ms_dpc_params.rxlev_meas; + struct gsm_power_ctrl_meas_params *mp = &lchan->ms_power_ctrl.dpc_params.rxlev_meas; mp->algo = GSM_PWR_CTRL_MEAS_AVG_ALGO_OSMO_EWMA; mp->ewma.alpha = 20; /* 80% smoothing */ @@ -238,18 +238,18 @@ static void test_power_hysteresis(void) { struct gsm_lchan *lchan; - const struct gsm_power_ctrl_params *params; + struct gsm_power_ctrl_params *params; int16_t good_lqual; init_test(__func__); lchan = &g_trx->ts[0].lchan[0]; lchan->type = GSM_LCHAN_SDCCH; - params = lchan->ms_power_ctrl.dpc_params; + params = &lchan->ms_power_ctrl.dpc_params; good_lqual = (params->ci_sdcch_meas.lower_thresh + 2) * 10; /* Tolerate power deviations in range -80 .. -70 */ - lchan->ms_dpc_params.rxlev_meas.lower_thresh = 30; - lchan->ms_dpc_params.rxlev_meas.upper_thresh = 40; + params->rxlev_meas.lower_thresh = 30; + params->rxlev_meas.upper_thresh = 40; lchan->ms_power_ctrl.current = ms_pwr_ctl_lvl(GSM_BAND_1800, 0); OSMO_ASSERT(lchan->ms_power_ctrl.current == 15); @@ -277,7 +277,7 @@ init_test(__func__); lchan = &g_trx->ts[0].lchan[0]; lchan->type = GSM_LCHAN_SDCCH; - params = lchan->ms_power_ctrl.dpc_params; + params = &lchan->ms_power_ctrl.dpc_params; good_lqual = (params->ci_sdcch_meas.lower_thresh + 2) * 10; lchan->ms_power_ctrl.max = ms_pwr_ctl_lvl(GSM_BAND_1800, 26); @@ -325,7 +325,7 @@ /* Set the corresponding power control interval */ printf("%s(): power control interval is now %u\n", __func__, i); - lchan->ms_dpc_params.ctrl_interval = i; + lchan->ms_power_ctrl.dpc_params.ctrl_interval = i; for (j = 0; j < ARRAY_SIZE(script[i]); j++) { apply_power_test(lchan, script[i][j][0], /* UL RxLev */ @@ -346,7 +346,7 @@ init_test(__func__); lchan = &g_trx->ts[0].lchan[0]; - params = lchan->ms_power_ctrl.dpc_params; + params = &lchan->ms_power_ctrl.dpc_params; lchan->type = GSM_LCHAN_SDCCH; good_lqual = (params->ci_sdcch_meas.lower_thresh + 2) * 10; too_low_lqual = (params->ci_sdcch_meas.lower_thresh - 1) * 10; @@ -383,14 +383,14 @@ static void test_good_threshold_convergence(void) { struct gsm_lchan *lchan; - const struct gsm_power_ctrl_params *params; + struct gsm_power_ctrl_params *params; int16_t good_lqual, good_rxlev; init_test(__func__); lchan = &g_trx->ts[0].lchan[0]; - params = lchan->ms_power_ctrl.dpc_params; - lchan->ms_dpc_params.rxlev_meas.upper_thresh = 37; - lchan->ms_dpc_params.rxlev_meas.lower_thresh = 30; + params = &lchan->ms_power_ctrl.dpc_params; + params->rxlev_meas.upper_thresh = 37; + params->rxlev_meas.lower_thresh = 30; lchan->type = GSM_LCHAN_SDCCH; good_lqual = (params->ci_sdcch_meas.lower_thresh + 2) * 10; good_rxlev = rxlev2dbm(params->rxlev_meas.lower_thresh + 2); -- To view, visit https://gerrit.osmocom.org/c/osmo-bts/+/41807?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: newchange Gerrit-Project: osmo-bts Gerrit-Branch: master Gerrit-Change-Id: I0e2a6c2c33e0ac9a0bc1734d83eaeafc27f2f4df Gerrit-Change-Number: 41807 Gerrit-PatchSet: 1 Gerrit-Owner: pespin <pespin(a)sysmocom.de>

1 0

[XS] Change in android-apdu-proxy[master]: OmapiCallbackHandlerVpcd: fix typo
by dexter 09 Jan '26

09 Jan '26

dexter has submitted this change. ( https://gerrit.osmocom.org/c/android-apdu-proxy/+/41797?usp=email ) Change subject: OmapiCallbackHandlerVpcd: fix typo ...................................................................... OmapiCallbackHandlerVpcd: fix typo Change-Id: I113757e5ee547c20d3557a9080386592a1919954 --- M app/src/main/java/org/osmocom/androidApduProxy/OmapiCallbackHandlerVpcd.java 1 file changed, 1 insertion(+), 1 deletion(-) Approvals: Jenkins Builder: Verified dexter: Looks good to me, approved diff --git a/app/src/main/java/org/osmocom/androidApduProxy/OmapiCallbackHandlerVpcd.java b/app/src/main/java/org/osmocom/androidApduProxy/OmapiCallbackHandlerVpcd.java index 088edf5..d5b4043 100644 --- a/app/src/main/java/org/osmocom/androidApduProxy/OmapiCallbackHandlerVpcd.java +++ b/app/src/main/java/org/osmocom/androidApduProxy/OmapiCallbackHandlerVpcd.java @@ -104,7 +104,7 @@ Log.i("PROXY", "Exchanging TPDU...\n"); //In case the TPDU contains a SELECT by DF-Name, which is forbidden by OMAPI by design, we must //find an alternative solution: In case the SELECT targets the currently selected application, - //we just use the FID 7FFF, which is an alias for the currently selected application. In cas the + //we just use the FID 7FFF, which is an alias for the currently selected application. In case the //AID is different, we close the OMAPI channel and re-open it with the new AID. If this fails, we //we just pretend that we haven't found the file. if (Arrays.equals(Arrays.copyOf( tpdu,3), Utils.h2b("00A404") ) ) { -- To view, visit https://gerrit.osmocom.org/c/android-apdu-proxy/+/41797?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: merged Gerrit-Project: android-apdu-proxy Gerrit-Branch: master Gerrit-Change-Id: I113757e5ee547c20d3557a9080386592a1919954 Gerrit-Change-Number: 41797 Gerrit-PatchSet: 1 Gerrit-Owner: dexter <pmaier(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: dexter <pmaier(a)sysmocom.de>

1 0

[XS] Change in android-apdu-proxy[master]: OmapiCallbackHandlerVpcd: fix typo
by dexter 09 Jan '26

09 Jan '26

dexter has posted comments on this change by dexter. ( https://gerrit.osmocom.org/c/android-apdu-proxy/+/41797?usp=email ) Change subject: OmapiCallbackHandlerVpcd: fix typo ...................................................................... Patch Set 1: Code-Review+2 -- To view, visit https://gerrit.osmocom.org/c/android-apdu-proxy/+/41797?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: android-apdu-proxy Gerrit-Branch: master Gerrit-Change-Id: I113757e5ee547c20d3557a9080386592a1919954 Gerrit-Change-Number: 41797 Gerrit-PatchSet: 1 Gerrit-Owner: dexter <pmaier(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: dexter <pmaier(a)sysmocom.de> Gerrit-Comment-Date: Fri, 09 Jan 2026 12:36:38 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes

1 0

[XS] Change in android-apdu-proxy[master]: README.md: add adb install commandline
by dexter 09 Jan '26

09 Jan '26

dexter has uploaded this change for review. ( https://gerrit.osmocom.org/c/android-apdu-proxy/+/41799?usp=email ) Change subject: README.md: add adb install commandline ...................................................................... README.md: add adb install commandline Change-Id: I4ab62c24dd265ed6813d8b941d84d2f2126df2fa --- M README.md 1 file changed, 4 insertions(+), 0 deletions(-) git pull ssh://gerrit.osmocom.org:29418/android-apdu-proxy refs/changes/99/41799/1 diff --git a/README.md b/README.md index cc8e34f..738a671 100644 --- a/README.md +++ b/README.md @@ -183,6 +183,10 @@ ./app/build/outputs/apk/release. This file can be installed on the Android device. +``` +$ adb install ./app/build/outputs/apk/release/app-release.apk +``` + Signing and ARA-M configuration ------------------------------- -- To view, visit https://gerrit.osmocom.org/c/android-apdu-proxy/+/41799?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: newchange Gerrit-Project: android-apdu-proxy Gerrit-Branch: master Gerrit-Change-Id: I4ab62c24dd265ed6813d8b941d84d2f2126df2fa Gerrit-Change-Number: 41799 Gerrit-PatchSet: 1 Gerrit-Owner: dexter <pmaier(a)sysmocom.de>

1 0

2026

2025

2024

2023

2022

gerrit-log January 2026