osmith has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/37709?usp=email )
Change subject: mme: initial testenv.cfg
......................................................................
mme: initial testenv.cfg
Change-Id: I780584cc7722d92baa213049ee0a35e16a0e087c
---
M mme/MME_Tests.cfg
A mme/freediameter.conf
A mme/open5gs-mme.yaml
A mme/testenv.cfg
4 files changed, 375 insertions(+), 0 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-ttcn3-hacks refs/changes/09/37709/1
diff --git a/mme/MME_Tests.cfg b/mme/MME_Tests.cfg
index 3e478c3..d0f5807 100644
--- a/mme/MME_Tests.cfg
+++ b/mme/MME_Tests.cfg
@@ -11,6 +11,33 @@
[TESTPORT_PARAMETERS]
[MODULE_PARAMETERS]
+# S1 interface
+mp_mme_ip := "127.0.0.201";
+mp_mme_s1ap_port := 36412;
+mp_s1_local_ip := "127.0.0.202";
+mp_s1_local_port := 50000;
+
+# S6 interface
+mp_s6_local_ip := "127.0.0.202";
+mp_s6_local_port := 3868;
+
+# SGs interface
+mp_sgs_local_ip := "127.0.0.202";
+mp_sgs_local_port := 29118;
+mp_vlr_name := "vlr.example.net";
+mp_mme_name := "mmec01.mmegi0001.mme.epc.mnc070.mcc901.3gppnetwork.org";
+
+# Gn interface
+mp_gn_local_ip := "127.0.0.202";
+mp_gn_local_port := 2124;
+mp_gn_remote_ip := "127.0.0.201";
+mp_gn_remote_port := 2123;
+
+# S11 interface (GTPv2C, interface between MME and SGW)
+mp_s11_local_ip := "127.0.0.202";
+mp_s11_local_port := 2123;
+mp_s11_remote_ip := "127.0.0.201";
+mp_s11_remote_port := 2123;
[MAIN_CONTROLLER]
diff --git a/mme/freediameter.conf b/mme/freediameter.conf
new file mode 100644
index 0000000..932a5be
--- /dev/null
+++ b/mme/freediameter.conf
@@ -0,0 +1,265 @@
+# This is a sample configuration file for freeDiameter daemon.
+
+# Most of the options can be omitted, as they default to reasonable values.
+# Only TLS-related options must be configured properly in usual setups.
+
+# It is possible to use "include" keyword to import additional files
+# e.g.: include "/etc/freeDiameter.d/*.conf"
+# This is exactly equivalent as copy & paste the content of the included file(s)
+# where the "include" keyword is found.
+
+
+##############################################################
+## Peer identity and realm
+
+# The Diameter Identity of this daemon.
+# This must be a valid FQDN that resolves to the local host.
+# Default: hostname's FQDN
+#Identity = "aaa.koganei.freediameter.net";
+Identity = "mme.localdomain";
+
+# The Diameter Realm of this daemon.
+# Default: the domain part of Identity (after the first dot).
+#Realm = "koganei.freediameter.net";
+Realm = "localdomain";
+
+##############################################################
+## Transport protocol configuration
+
+# The port this peer is listening on for incoming connections (TCP and SCTP).
+# Default: 3868. Use 0 to disable.
+Port = 3868;
+
+# The port this peer is listening on for incoming TLS-protected connections (TCP and SCTP).
+# See TLS_old_method for more information about TLS flavours.
+# Note: we use TLS/SCTP instead of DTLS/SCTP at the moment. This will change in future version of freeDiameter.
+# Default: 5868. Use 0 to disable.
+SecPort = 0;
+
+# Use RFC3588 method for TLS protection, where TLS is negociated after CER/CEA exchange is completed
+# on the unsecure connection. The alternative is RFC6733 mechanism, where TLS protects also the
+# CER/CEA exchange on a dedicated secure port.
+# This parameter only affects outgoing connections.
+# The setting can be also defined per-peer (see Peers configuration section).
+# Default: use RFC6733 method with separate port for TLS.
+#TLS_old_method;
+
+# Disable use of TCP protocol (only listen and connect over SCTP)
+# Default : TCP enabled
+#No_TCP;
+
+# Disable use of SCTP protocol (only listen and connect over TCP)
+# Default : SCTP enabled
+#No_SCTP;
+# This option is ignored if freeDiameter is compiled with DISABLE_SCTP option.
+
+# Prefer TCP instead of SCTP for establishing new connections.
+# This setting may be overwritten per peer in peer configuration blocs.
+# Default : SCTP is attempted first.
+#Prefer_TCP;
+
+# Default number of streams per SCTP associations.
+# This setting may be overwritten per peer basis.
+# Default : 30 streams
+#SCTP_streams = 30;
+
+##############################################################
+## Endpoint configuration
+
+# Disable use of IP addresses (only IPv6)
+# Default : IP enabled
+#No_IP;
+
+# Disable use of IPv6 addresses (only IP)
+# Default : IPv6 enabled
+#No_IPv6;
+
+# Specify local addresses the server must bind to
+# Default : listen on all addresses available.
+#ListenOn = "202.249.37.5";
+#ListenOn = "2001:200:903:2::202:1";
+#ListenOn = "fe80::21c:5ff:fe98:7d62%eth0";
+ListenOn = "127.0.0.201";
+
+
+##############################################################
+## Server configuration
+
+# How many Diameter peers are allowed to be connecting at the same time ?
+# This parameter limits the number of incoming connections from the time
+# the connection is accepted until the first CER is received.
+# Default: 5 unidentified clients in paralel.
+#ThreadsPerServer = 5;
+
+##############################################################
+## TLS Configuration
+
+# TLS is managed by the GNUTLS library in the freeDiameter daemon.
+# You may find more information about parameters and special behaviors
+# in the relevant documentation.
+# http://www.gnu.org/software/gnutls/manual/
+
+# Credentials of the local peer
+# The X509 certificate and private key file to use for the local peer.
+# The files must contain PKCS-1 encoded RSA key, in PEM format.
+# (These parameters are passed to gnutls_certificate_set_x509_key_file function)
+# Default : NO DEFAULT
+#TLS_Cred = "<x509 certif file.PEM>" , "<x509 private key file.PEM>";
+#TLS_Cred = "/etc/ssl/certs/freeDiameter.pem", "/etc/ssl/private/freeDiameter.key";
+
+# Certificate authority / trust anchors
+# The file containing the list of trusted Certificate Authorities (PEM list)
+# (This parameter is passed to gnutls_certificate_set_x509_trust_file function)
+# The directive can appear several times to specify several files.
+# Default : GNUTLS default behavior
+#TLS_CA = "<file.PEM>";
+
+# Certificate Revocation List file
+# The information about revoked certificates.
+# The file contains a list of trusted CRLs in PEM format. They should have been verified before.
+# (This parameter is passed to gnutls_certificate_set_x509_crl_file function)
+# Note: openssl CRL format might have interoperability issue with GNUTLS format.
+# Default : GNUTLS default behavior
+#TLS_CRL = "<file.PEM>";
+
+# GNU TLS Priority string
+# This string allows to configure the behavior of GNUTLS key exchanges
+# algorithms. See gnutls_priority_init function documentation for information.
+# You should also refer to the Diameter required TLS support here:
+# http://tools.ietf.org/html/rfc6733#section-13.1
+# Default : "NORMAL"
+# Example: TLS_Prio = "NONE:+VERS-TLS1.1:+AES-128-CBC:+RSA:+SHA1:+COMP-NULL";
+#TLS_Prio = "NORMAL";
+
+# Diffie-Hellman parameters size
+# Set the number of bits for generated DH parameters
+# Valid value should be 768, 1024, 2048, 3072 or 4096.
+# (This parameter is passed to gnutls_dh_params_generate2 function,
+# it usually should match RSA key size)
+# Default : 1024
+#TLS_DH_Bits = 1024;
+
+# Alternatively, you can specify a file to load the PKCS#3 encoded
+# DH parameters directly from. This accelerates the daemon start
+# but is slightly less secure. If this file is provided, the
+# TLS_DH_Bits parameters has no effect.
+# Default : no default.
+#TLS_DH_File = "<file.PEM>";
+
+
+##############################################################
+## Timers configuration
+
+# The Tc timer of this peer.
+# It is the delay before a new attempt is made to reconnect a disconnected peer.
+# The value is expressed in seconds. The recommended value is 30 seconds.
+# Default: 30
+#TcTimer = 30;
+
+# The Tw timer of this peer.
+# It is the delay before a watchdog message is sent, as described in RFC 3539.
+# The value is expressed in seconds. The default value is 30 seconds. Value must
+# be greater or equal to 6 seconds. See details in the RFC.
+# Default: 30
+#TwTimer = 30;
+
+##############################################################
+## Applications configuration
+
+# Disable the relaying of Diameter messages?
+# For messages not handled locally, the default behavior is to forward the
+# message to another peer if any is available, according to the routing
+# algorithms. In addition the "0xffffff" application is advertised in CER/CEA
+# exchanges.
+# Default: Relaying is enabled.
+#NoRelay;
+NoRelay;
+
+# Number of server threads that can handle incoming messages at the same time.
+# Default: 4
+#AppServThreads = 4;
+
+# Other applications are configured by loaded extensions.
+
+##############################################################
+## Extensions configuration
+
+# The freeDiameter framework merely provides support for
+# Diameter Base Protocol. The specific application behaviors,
+# as well as advanced functions, are provided
+# by loadable extensions (plug-ins).
+# These extensions may in addition receive the name of a
+# configuration file, the format of which is extension-specific.
+#
+# Format:
+#LoadExtension = "/path/to/extension" [ : "/optional/configuration/file" ] ;
+#
+# Examples:
+#LoadExtension = "extensions/sample.fdx";
+#LoadExtension = "extensions/sample.fdx":"conf/sample.conf";
+
+# Extensions are named as follow:
+# dict_* for extensions that add content to the dictionary definitions.
+# dbg_* for extensions useful only to retrieve more information on the framework execution.
+# acl_* : Access control list, to control which peers are allowed to connect.
+# rt_* : routing extensions that impact how messages are forwarded to other peers.
+# app_* : applications, these extensions usually register callbacks to handle specific messages.
+# test_* : dummy extensions that are useful only in testing environments.
+
+
+# The dbg_msg_dump.fdx extension allows you to tweak the way freeDiameter displays some
+# information about some events. This extension does not actually use a configuration file
+# but receives directly a parameter in the string passed to the extension. Here are some examples:
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x1111"; # Removes all default hooks, very quiet even in case of errors.
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x2222"; # Display all events with few details.
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x0080"; # Dump complete information about sent and received messages.
+# The four digits respectively control: connections, routing decisions, sent/received messages, errors.
+# The values for each digit are:
+# 0 - default - keep the default behavior
+# 1 - quiet - remove any specific log
+# 2 - compact - display only a summary of the information
+# 4 - full - display the complete information on a single long line
+# 8 - tree - display the complete information in an easier to read format spanning several lines.
+
+LoadExtension = "dbg_msg_dumps.fdx" : "0x8888";
+LoadExtension = "dict_rfc5777.fdx";
+LoadExtension = "dict_mip6i.fdx";
+LoadExtension = "dict_nasreq.fdx";
+LoadExtension = "dict_nas_mipv6.fdx";
+LoadExtension = "dict_dcca.fdx";
+LoadExtension = "dict_dcca_3gpp.fdx";
+
+
+##############################################################
+## Peers configuration
+
+# The local server listens for incoming connections. By default,
+# all unknown connecting peers are rejected. Extensions can override this behavior (e.g., acl_wl).
+#
+# In addition to incoming connections, the local peer can
+# be configured to establish and maintain connections to some
+# Diameter nodes and allow connections from these nodes.
+# This is achieved with the ConnectPeer directive described below.
+#
+# Note that the configured Diameter Identity MUST match
+# the information received inside CEA, or the connection will be aborted.
+#
+# Format:
+#ConnectPeer = "diameterid" [ { parameter1; parameter2; ...} ] ;
+# Parameters that can be specified in the peer's parameter list:
+# No_TCP; No_SCTP; No_IP; No_IPv6; Prefer_TCP; TLS_old_method;
+# No_TLS; # assume transparent security instead of TLS. DTLS is not supported yet (will change in future versions).
+# Port = 5868; # The port to connect to
+# TcTimer = 30;
+# TwTimer = 30;
+# ConnectTo = "202.249.37.5";
+# ConnectTo = "2001:200:903:2::202:1";
+# TLS_Prio = "NORMAL";
+# Realm = "realm.net"; # Reject the peer if it does not advertise this realm.
+# Examples:
+#ConnectPeer = "aaa.wide.ad.jp";
+#ConnectPeer = "old.diameter.serv" { TcTimer = 60; TLS_old_method; No_SCTP; Port=3868; } ;
+ConnectPeer = "hss.localdomain" { ConnectTo = "127.0.0.202"; Port = 3868; No_TLS; TcTimer = 2; };
+
+
+##############################################################
diff --git a/mme/open5gs-mme.yaml b/mme/open5gs-mme.yaml
new file mode 100644
index 0000000..61c038d
--- /dev/null
+++ b/mme/open5gs-mme.yaml
@@ -0,0 +1,65 @@
+# See https://github.com/open5gs/open5gs/blob/main/configs/open5gs/mme.yaml.in
+
+logger:
+ level: debug
+
+global:
+ max:
+ ue: 1024
+
+mme:
+ freeDiameter: freediameter.conf
+ s1ap:
+ server:
+ - address: 127.0.0.201
+ gtpc:
+ server:
+ - address: 127.0.0.201
+ client:
+ sgwc:
+ - address: 127.0.0.202
+ smf:
+ - address: 127.0.0.201
+ - address: ::1
+ sgsn:
+ - address:
+ - 127.0.0.202
+ port: 2124
+ routes:
+ - rai:
+ lai:
+ plmn_id:
+ mcc: 262
+ mnc: 42
+ lac: 39594
+ rac: 187
+ ci: 1223
+ metrics:
+ server:
+ - address: 127.0.0.201
+ port: 9090
+ gummei:
+ - plmn_id:
+ mcc: 001
+ mnc: 01
+ mme_gid: 2
+ mme_code: 1
+ tai:
+ - plmn_id:
+ mcc: 001
+ mnc: 01
+ tac: 12345
+ security:
+ integrity_order : [ EIA2, EIA1, EIA0 ]
+ ciphering_order : [ EEA0, EEA1, EEA2 ]
+ network_name:
+ full: Open5GS
+ mme_name: open5gs-mme0
+
+parameter:
+
+max:
+
+usrsctp:
+
+time:
diff --git a/mme/testenv.cfg b/mme/testenv.cfg
new file mode 100644
index 0000000..3470fe5
--- /dev/null
+++ b/mme/testenv.cfg
@@ -0,0 +1,9 @@
+[testsuite]
+program=MME_Tests
+config=MME_Tests.cfg
+
+[mme]
+program=open5gs-mmed -c open5gs-mme.yaml
+make=open5gs
+package=open5gs-mme
+copy=open5gs-mme.yaml freediameter.conf
--
To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/37709?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-ttcn3-hacks
Gerrit-Branch: master
Gerrit-Change-Id: I780584cc7722d92baa213049ee0a35e16a0e087c
Gerrit-Change-Number: 37709
Gerrit-PatchSet: 1
Gerrit-Owner: osmith <osmith(a)sysmocom.de>
Gerrit-MessageType: newchange
osmith has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/37708?usp=email )
Change subject: hss: initial testenv.cfg
......................................................................
hss: initial testenv.cfg
Change-Id: I8a095f51f1a9516967d5188587537a2f90927f6c
---
M hss/HSS_Tests.cfg
A hss/create_test_subscribers.sh
A hss/freediameter.conf
A hss/mongod.conf
A hss/open5gs-hss.yaml
A hss/testenv.cfg
6 files changed, 388 insertions(+), 0 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-ttcn3-hacks refs/changes/08/37708/1
diff --git a/hss/HSS_Tests.cfg b/hss/HSS_Tests.cfg
index 24fe9c4..58c489b 100644
--- a/hss/HSS_Tests.cfg
+++ b/hss/HSS_Tests.cfg
@@ -11,6 +11,14 @@
[TESTPORT_PARAMETERS]
[MODULE_PARAMETERS]
+mp_hss_hostname := "127.0.0.201";
+mp_hss_port := 3868;
+mp_diam_local_hostname := "127.0.0.202";
+mp_diam_local_port := 3868;
+mp_diam_orig_realm := "localdomain";
+mp_diam_orig_host := "mme.localdomain";
+mp_diam_dest_realm := "localdomain";
+mp_diam_dest_host := "hss.localdomain";
[MAIN_CONTROLLER]
diff --git a/hss/create_test_subscribers.sh b/hss/create_test_subscribers.sh
new file mode 100755
index 0000000..f5b6c5b
--- /dev/null
+++ b/hss/create_test_subscribers.sh
@@ -0,0 +1,27 @@
+#!/bin/sh -ex
+DB_URI="mongodb://127.0.0.103/open5gs"
+DBCTL="$TESTENV_CACHE_DIR/open5gs-dbctl"
+DBCTL_CMD="$DBCTL --db_uri=$DB_URI"
+
+if ! [ -e "$DBCTL" ]; then
+ wget "https://raw.githubusercontent.com/open5gs/open5gs/v2.7.1/misc/db/open5gs-db…" \
+ -O "$DBCTL"
+fi
+
+if ! [ -x "$DBCTL" ]; then
+ chmod +x "$DBCTL"
+fi
+
+# mongod needs some time to bootstrap...
+while ! mongosh --quiet $DB_URI</dev/null; do
+ sleep 1
+done
+
+# Create a test subscriber with IMSI=001010000000000
+$DBCTL_CMD add 001010000000000 3c6e0b8a9c15224a8228b9a98ca1531d 762a2206fe0b4151ace403c86a11e479
+
+# Mark test subscriber with IMSI=001010000000001 as:
+# Subscriber-Status=OPERATOR_DETERMINED_BARRING (1)
+# Operator-Determined-Barring="Barring of all outgoing inter-zonal calls except those directed to the home PLMN country" (7)
+$DBCTL_CMD add 001010000000001 3c6e0b8a9c15224a8228b9a98ca1531d 762a2206fe0b4151ace403c86a11e479
+$DBCTL_CMD subscriber_status 001010000000001 1 7
diff --git a/hss/freediameter.conf b/hss/freediameter.conf
new file mode 100644
index 0000000..2670cae
--- /dev/null
+++ b/hss/freediameter.conf
@@ -0,0 +1,265 @@
+# This is a sample configuration file for freeDiameter daemon.
+
+# Most of the options can be omitted, as they default to reasonable values.
+# Only TLS-related options must be configured properly in usual setups.
+
+# It is possible to use "include" keyword to import additional files
+# e.g.: include "/etc/freeDiameter.d/*.conf"
+# This is exactly equivalent as copy & paste the content of the included file(s)
+# where the "include" keyword is found.
+
+
+##############################################################
+## Peer identity and realm
+
+# The Diameter Identity of this daemon.
+# This must be a valid FQDN that resolves to the local host.
+# Default: hostname's FQDN
+#Identity = "aaa.koganei.freediameter.net";
+Identity = "hss.localdomain";
+
+# The Diameter Realm of this daemon.
+# Default: the domain part of Identity (after the first dot).
+#Realm = "koganei.freediameter.net";
+Realm = "localdomain";
+
+##############################################################
+## Transport protocol configuration
+
+# The port this peer is listening on for incoming connections (TCP and SCTP).
+# Default: 3868. Use 0 to disable.
+Port = 3868;
+
+# The port this peer is listening on for incoming TLS-protected connections (TCP and SCTP).
+# See TLS_old_method for more information about TLS flavours.
+# Note: we use TLS/SCTP instead of DTLS/SCTP at the moment. This will change in future version of freeDiameter.
+# Default: 5868. Use 0 to disable.
+SecPort = 0;
+
+# Use RFC3588 method for TLS protection, where TLS is negociated after CER/CEA exchange is completed
+# on the unsecure connection. The alternative is RFC6733 mechanism, where TLS protects also the
+# CER/CEA exchange on a dedicated secure port.
+# This parameter only affects outgoing connections.
+# The setting can be also defined per-peer (see Peers configuration section).
+# Default: use RFC6733 method with separate port for TLS.
+#TLS_old_method;
+
+# Disable use of TCP protocol (only listen and connect over SCTP)
+# Default : TCP enabled
+#No_TCP;
+
+# Disable use of SCTP protocol (only listen and connect over TCP)
+# Default : SCTP enabled
+#No_SCTP;
+# This option is ignored if freeDiameter is compiled with DISABLE_SCTP option.
+
+# Prefer TCP instead of SCTP for establishing new connections.
+# This setting may be overwritten per peer in peer configuration blocs.
+# Default : SCTP is attempted first.
+#Prefer_TCP;
+
+# Default number of streams per SCTP associations.
+# This setting may be overwritten per peer basis.
+# Default : 30 streams
+#SCTP_streams = 30;
+
+##############################################################
+## Endpoint configuration
+
+# Disable use of IP addresses (only IPv6)
+# Default : IP enabled
+#No_IP;
+
+# Disable use of IPv6 addresses (only IP)
+# Default : IPv6 enabled
+#No_IPv6;
+
+# Specify local addresses the server must bind to
+# Default : listen on all addresses available.
+#ListenOn = "202.249.37.5";
+#ListenOn = "2001:200:903:2::202:1";
+#ListenOn = "fe80::21c:5ff:fe98:7d62%eth0";
+ListenOn = "127.0.0.201";
+
+
+##############################################################
+## Server configuration
+
+# How many Diameter peers are allowed to be connecting at the same time ?
+# This parameter limits the number of incoming connections from the time
+# the connection is accepted until the first CER is received.
+# Default: 5 unidentified clients in paralel.
+#ThreadsPerServer = 5;
+
+##############################################################
+## TLS Configuration
+
+# TLS is managed by the GNUTLS library in the freeDiameter daemon.
+# You may find more information about parameters and special behaviors
+# in the relevant documentation.
+# http://www.gnu.org/software/gnutls/manual/
+
+# Credentials of the local peer
+# The X509 certificate and private key file to use for the local peer.
+# The files must contain PKCS-1 encoded RSA key, in PEM format.
+# (These parameters are passed to gnutls_certificate_set_x509_key_file function)
+# Default : NO DEFAULT
+#TLS_Cred = "<x509 certif file.PEM>" , "<x509 private key file.PEM>";
+#TLS_Cred = "/etc/ssl/certs/freeDiameter.pem", "/etc/ssl/private/freeDiameter.key";
+
+# Certificate authority / trust anchors
+# The file containing the list of trusted Certificate Authorities (PEM list)
+# (This parameter is passed to gnutls_certificate_set_x509_trust_file function)
+# The directive can appear several times to specify several files.
+# Default : GNUTLS default behavior
+#TLS_CA = "<file.PEM>";
+
+# Certificate Revocation List file
+# The information about revoked certificates.
+# The file contains a list of trusted CRLs in PEM format. They should have been verified before.
+# (This parameter is passed to gnutls_certificate_set_x509_crl_file function)
+# Note: openssl CRL format might have interoperability issue with GNUTLS format.
+# Default : GNUTLS default behavior
+#TLS_CRL = "<file.PEM>";
+
+# GNU TLS Priority string
+# This string allows to configure the behavior of GNUTLS key exchanges
+# algorithms. See gnutls_priority_init function documentation for information.
+# You should also refer to the Diameter required TLS support here:
+# http://tools.ietf.org/html/rfc6733#section-13.1
+# Default : "NORMAL"
+# Example: TLS_Prio = "NONE:+VERS-TLS1.1:+AES-128-CBC:+RSA:+SHA1:+COMP-NULL";
+#TLS_Prio = "NORMAL";
+
+# Diffie-Hellman parameters size
+# Set the number of bits for generated DH parameters
+# Valid value should be 768, 1024, 2048, 3072 or 4096.
+# (This parameter is passed to gnutls_dh_params_generate2 function,
+# it usually should match RSA key size)
+# Default : 1024
+#TLS_DH_Bits = 1024;
+
+# Alternatively, you can specify a file to load the PKCS#3 encoded
+# DH parameters directly from. This accelerates the daemon start
+# but is slightly less secure. If this file is provided, the
+# TLS_DH_Bits parameters has no effect.
+# Default : no default.
+#TLS_DH_File = "<file.PEM>";
+
+
+##############################################################
+## Timers configuration
+
+# The Tc timer of this peer.
+# It is the delay before a new attempt is made to reconnect a disconnected peer.
+# The value is expressed in seconds. The recommended value is 30 seconds.
+# Default: 30
+#TcTimer = 30;
+
+# The Tw timer of this peer.
+# It is the delay before a watchdog message is sent, as described in RFC 3539.
+# The value is expressed in seconds. The default value is 30 seconds. Value must
+# be greater or equal to 6 seconds. See details in the RFC.
+# Default: 30
+#TwTimer = 30;
+
+##############################################################
+## Applications configuration
+
+# Disable the relaying of Diameter messages?
+# For messages not handled locally, the default behavior is to forward the
+# message to another peer if any is available, according to the routing
+# algorithms. In addition the "0xffffff" application is advertised in CER/CEA
+# exchanges.
+# Default: Relaying is enabled.
+#NoRelay;
+NoRelay;
+
+# Number of server threads that can handle incoming messages at the same time.
+# Default: 4
+#AppServThreads = 4;
+
+# Other applications are configured by loaded extensions.
+
+##############################################################
+## Extensions configuration
+
+# The freeDiameter framework merely provides support for
+# Diameter Base Protocol. The specific application behaviors,
+# as well as advanced functions, are provided
+# by loadable extensions (plug-ins).
+# These extensions may in addition receive the name of a
+# configuration file, the format of which is extension-specific.
+#
+# Format:
+#LoadExtension = "/path/to/extension" [ : "/optional/configuration/file" ] ;
+#
+# Examples:
+#LoadExtension = "extensions/sample.fdx";
+#LoadExtension = "extensions/sample.fdx":"conf/sample.conf";
+
+# Extensions are named as follow:
+# dict_* for extensions that add content to the dictionary definitions.
+# dbg_* for extensions useful only to retrieve more information on the framework execution.
+# acl_* : Access control list, to control which peers are allowed to connect.
+# rt_* : routing extensions that impact how messages are forwarded to other peers.
+# app_* : applications, these extensions usually register callbacks to handle specific messages.
+# test_* : dummy extensions that are useful only in testing environments.
+
+
+# The dbg_msg_dump.fdx extension allows you to tweak the way freeDiameter displays some
+# information about some events. This extension does not actually use a configuration file
+# but receives directly a parameter in the string passed to the extension. Here are some examples:
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x1111"; # Removes all default hooks, very quiet even in case of errors.
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x2222"; # Display all events with few details.
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x0080"; # Dump complete information about sent and received messages.
+# The four digits respectively control: connections, routing decisions, sent/received messages, errors.
+# The values for each digit are:
+# 0 - default - keep the default behavior
+# 1 - quiet - remove any specific log
+# 2 - compact - display only a summary of the information
+# 4 - full - display the complete information on a single long line
+# 8 - tree - display the complete information in an easier to read format spanning several lines.
+
+LoadExtension = "dbg_msg_dumps.fdx" : "0x8888";
+LoadExtension = "dict_rfc5777.fdx";
+LoadExtension = "dict_mip6i.fdx";
+LoadExtension = "dict_nasreq.fdx";
+LoadExtension = "dict_nas_mipv6.fdx";
+LoadExtension = "dict_dcca.fdx";
+LoadExtension = "dict_dcca_3gpp.fdx";
+
+
+##############################################################
+## Peers configuration
+
+# The local server listens for incoming connections. By default,
+# all unknown connecting peers are rejected. Extensions can override this behavior (e.g., acl_wl).
+#
+# In addition to incoming connections, the local peer can
+# be configured to establish and maintain connections to some
+# Diameter nodes and allow connections from these nodes.
+# This is achieved with the ConnectPeer directive described below.
+#
+# Note that the configured Diameter Identity MUST match
+# the information received inside CEA, or the connection will be aborted.
+#
+# Format:
+#ConnectPeer = "diameterid" [ { parameter1; parameter2; ...} ] ;
+# Parameters that can be specified in the peer's parameter list:
+# No_TCP; No_SCTP; No_IP; No_IPv6; Prefer_TCP; TLS_old_method;
+# No_TLS; # assume transparent security instead of TLS. DTLS is not supported yet (will change in future versions).
+# Port = 5868; # The port to connect to
+# TcTimer = 30;
+# TwTimer = 30;
+# ConnectTo = "202.249.37.5";
+# ConnectTo = "2001:200:903:2::202:1";
+# TLS_Prio = "NORMAL";
+# Realm = "realm.net"; # Reject the peer if it does not advertise this realm.
+# Examples:
+#ConnectPeer = "aaa.wide.ad.jp";
+#ConnectPeer = "old.diameter.serv" { TcTimer = 60; TLS_old_method; No_SCTP; Port=3868; } ;
+ConnectPeer = "mme.localdomain" { ConnectTo = "127.0.0.202"; Port = 3868; No_TLS; TcTimer = 2; };
+
+
+##############################################################
diff --git a/hss/mongod.conf b/hss/mongod.conf
new file mode 100644
index 0000000..ff648f4
--- /dev/null
+++ b/hss/mongod.conf
@@ -0,0 +1,45 @@
+# mongod.conf
+
+# for documentation of all options, see:
+# http://docs.mongodb.org/manual/reference/configuration-options/
+
+# Where and how to store data.
+storage:
+ dbPath: db
+# journal:
+# enabled: true
+# engine:
+# mmapv1:
+# wiredTiger:
+
+# where to write logging data.
+# systemLog:
+# destination: file
+# logAppend: true
+# path: /data/mongod.log
+
+# network interfaces
+net:
+ port: 27017
+ bindIp: 127.0.0.103
+
+
+# how the process runs
+processManagement:
+ timeZoneInfo: /usr/share/zoneinfo
+
+#security:
+
+#operationProfiling:
+
+#replication:
+
+#sharding:
+
+## Enterprise-Only Options:
+
+#auditLog:
+
+#snmp:
+
+
diff --git a/hss/open5gs-hss.yaml b/hss/open5gs-hss.yaml
new file mode 100644
index 0000000..6b90bdc
--- /dev/null
+++ b/hss/open5gs-hss.yaml
@@ -0,0 +1,17 @@
+# See https://github.com/open5gs/open5gs/blob/main/configs/open5gs/hss.yaml.in
+
+db_uri: mongodb://127.0.0.103/open5gs
+
+logger:
+ level: trace
+
+global:
+ max:
+ ue: 1024
+
+hss:
+ freeDiameter: freediameter.conf
+
+parameter:
+
+max:
diff --git a/hss/testenv.cfg b/hss/testenv.cfg
new file mode 100644
index 0000000..79ccede
--- /dev/null
+++ b/hss/testenv.cfg
@@ -0,0 +1,17 @@
+[testsuite]
+program=HSS_Tests
+config=HSS_Tests.cfg
+
+[db]
+prepare=mkdir db
+program=mongod --config mongod.conf
+setup=create_test_subscribers.sh
+copy=mongod.conf
+make=no
+package=no
+
+[hss]
+program=open5gs-hssd -c open5gs-hss.yaml
+make=open5gs
+copy=open5gs-hss.yaml freediameter.conf
+package=open5gs-hss
--
To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/37708?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-ttcn3-hacks
Gerrit-Branch: master
Gerrit-Change-Id: I8a095f51f1a9516967d5188587537a2f90927f6c
Gerrit-Change-Number: 37708
Gerrit-PatchSet: 1
Gerrit-Owner: osmith <osmith(a)sysmocom.de>
Gerrit-MessageType: newchange
