April 2023 - gerrit-log - lists.osmocom.org

[S] Change in libosmo-pfcp[master]: debian: set compat level to 10

by pespin

Attention is currently required from: osmith. pespin has posted comments on this change. ( https://gerrit.osmocom.org/c/libosmo-pfcp/+/32451 ) Change subject: debian: set compat level to 10 ...................................................................... Patch Set 3: (1 comment) Patchset: PS3: no debian/format change here? -- To view, visit https://gerrit.osmocom.org/c/libosmo-pfcp/+/32451 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: libosmo-pfcp Gerrit-Branch: master Gerrit-Change-Id: I6ee4aace6bf7c246338408c41f790189d75d5488 Gerrit-Change-Number: 32451 Gerrit-PatchSet: 3 Gerrit-Owner: osmith <osmith(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-CC: pespin <pespin(a)sysmocom.de> Gerrit-Attention: osmith <osmith(a)sysmocom.de> Gerrit-Comment-Date: Tue, 25 Apr 2023 15:54:36 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Gerrit-MessageType: comment

2 years, 2 months

1
0
0 0

[S] Change in libosmo-gprs[master]: debian: set compat level to 10

by pespin

Attention is currently required from: osmith. pespin has posted comments on this change. ( https://gerrit.osmocom.org/c/libosmo-gprs/+/32449 ) Change subject: debian: set compat level to 10 ...................................................................... Patch Set 3: (1 comment) Patchset: PS3: no debian/format change here? -- To view, visit https://gerrit.osmocom.org/c/libosmo-gprs/+/32449 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: libosmo-gprs Gerrit-Branch: master Gerrit-Change-Id: Icfdbea7cbe4681cd3b286471032fd6dd7226888f Gerrit-Change-Number: 32449 Gerrit-PatchSet: 3 Gerrit-Owner: osmith <osmith(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-CC: pespin <pespin(a)sysmocom.de> Gerrit-Attention: osmith <osmith(a)sysmocom.de> Gerrit-Comment-Date: Tue, 25 Apr 2023 15:54:16 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Gerrit-MessageType: comment

2 years, 2 months

1
0
0 0

[M] Change in simtrace2[master]: Cosmetic: fix CI errors

by osmith

osmith has posted comments on this change. ( https://gerrit.osmocom.org/c/simtrace2/+/32487 ) Change subject: Cosmetic: fix CI errors ...................................................................... Set Ready For Review -- To view, visit https://gerrit.osmocom.org/c/simtrace2/+/32487 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: simtrace2 Gerrit-Branch: master Gerrit-Change-Id: Ibb2e42e9b4307275a33e4000c201847a6bd60137 Gerrit-Change-Number: 32487 Gerrit-PatchSet: 2 Gerrit-Owner: osmith <osmith(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Comment-Date: Tue, 25 Apr 2023 15:54:05 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: No Gerrit-MessageType: comment

2 years, 2 months

1
0
0 0

[S] Change in libosmo-abis[master]: debian: set compat level to 10

by pespin

Attention is currently required from: osmith. pespin has posted comments on this change. ( https://gerrit.osmocom.org/c/libosmo-abis/+/32448 ) Change subject: debian: set compat level to 10 ...................................................................... Patch Set 3: Code-Review+1 -- To view, visit https://gerrit.osmocom.org/c/libosmo-abis/+/32448 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: libosmo-abis Gerrit-Branch: master Gerrit-Change-Id: Icfdbea7cbe4681cd3b286471032fd6dd7226888f Gerrit-Change-Number: 32448 Gerrit-PatchSet: 3 Gerrit-Owner: osmith <osmith(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-Attention: osmith <osmith(a)sysmocom.de> Gerrit-Comment-Date: Tue, 25 Apr 2023 15:53:28 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

2 years, 2 months

1
0
0 0

[S] Change in libasn1c[master]: debian: set compat level to 10

by pespin

Attention is currently required from: osmith. pespin has posted comments on this change. ( https://gerrit.osmocom.org/c/libasn1c/+/32446 ) Change subject: debian: set compat level to 10 ...................................................................... Patch Set 3: Code-Review+1 -- To view, visit https://gerrit.osmocom.org/c/libasn1c/+/32446 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: libasn1c Gerrit-Branch: master Gerrit-Change-Id: I393d7e1211e6f9ace420a874a0582208c939bbc2 Gerrit-Change-Number: 32446 Gerrit-PatchSet: 3 Gerrit-Owner: osmith <osmith(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-Attention: osmith <osmith(a)sysmocom.de> Gerrit-Comment-Date: Tue, 25 Apr 2023 15:53:16 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

2 years, 2 months

1
0
0 0

[S] Change in libgtpnl[master]: debian: set compat level to 10

by pespin

Attention is currently required from: osmith. pespin has posted comments on this change. ( https://gerrit.osmocom.org/c/libgtpnl/+/32447 ) Change subject: debian: set compat level to 10 ...................................................................... Patch Set 3: Code-Review+1 -- To view, visit https://gerrit.osmocom.org/c/libgtpnl/+/32447 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: libgtpnl Gerrit-Branch: master Gerrit-Change-Id: I393d7e1211e6f9ace420a874a0582208c939bbc2 Gerrit-Change-Number: 32447 Gerrit-PatchSet: 3 Gerrit-Owner: osmith <osmith(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-Attention: osmith <osmith(a)sysmocom.de> Gerrit-Comment-Date: Tue, 25 Apr 2023 15:53:07 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

2 years, 2 months

1
0
0 0

[M] Change in simtrace2[master]: Cosmetic: fix CI errors

by osmith

osmith has abandoned this change. ( https://gerrit.osmocom.org/c/simtrace2/+/32489 ) Change subject: Cosmetic: fix CI errors ...................................................................... Abandoned squash gone wrong -- To view, visit https://gerrit.osmocom.org/c/simtrace2/+/32489 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: simtrace2 Gerrit-Branch: master Gerrit-Change-Id: Iac9f64895e4e10b677c23e47b95712dbb5e98cf1 Gerrit-Change-Number: 32489 Gerrit-PatchSet: 1 Gerrit-Owner: osmith <osmith(a)sysmocom.de> Gerrit-CC: Jenkins Builder Gerrit-MessageType: abandon

2 years, 2 months

1
0
0 0

[M] Change in simtrace2[master]: Cosmetic: fix CI errors

by osmith

osmith has uploaded this change for review. ( https://gerrit.osmocom.org/c/simtrace2/+/32489 ) Change subject: Cosmetic: fix CI errors ...................................................................... Cosmetic: fix CI errors * Fix UTF-8 encoding. This caused the endianness check to fail, which reads all .c and .h files. * Add .checkpatch.conf to skip linting for: firmware/atmel_softpack_libraries Change-Id: Ibb2e42e9b4307275a33e4000c201847a6bd60137 encoding fixup Change-Id: Iac9f64895e4e10b677c23e47b95712dbb5e98cf1 --- A .checkpatch.conf M firmware/atmel_softpack_libraries/libchip_sam3s/chip.h M firmware/atmel_softpack_libraries/usb/include/USBD.h M firmware/atmel_softpack_libraries/usb/include/USBDescriptors.h M firmware/libcommon/include/cciddriver.h M firmware/libcommon/source/cciddriver.c 6 files changed, 40 insertions(+), 20 deletions(-) git pull ssh://gerrit.osmocom.org:29418/simtrace2 refs/changes/89/32489/1 diff --git a/.checkpatch.conf b/.checkpatch.conf new file mode 100644 index 0000000..591ff65 --- /dev/null +++ b/.checkpatch.conf @@ -0,0 +1 @@ +--exclude ^firmware/atmel_softpack_libraries/.*$ diff --git a/firmware/atmel_softpack_libraries/libchip_sam3s/chip.h b/firmware/atmel_softpack_libraries/libchip_sam3s/chip.h index e6af94e..8ae70df 100644 --- a/firmware/atmel_softpack_libraries/libchip_sam3s/chip.h +++ b/firmware/atmel_softpack_libraries/libchip_sam3s/chip.h @@ -15,7 +15,7 @@ /* Define attribute */ -#if defined ( __CC_ARM ) /* Keil µVision 4 */ +#if defined ( __CC_ARM ) /* Keil ÂµVision 4 */ #define WEAK __attribute__ ((weak)) #elif defined ( __ICCARM__ ) /* IAR Ewarm 5.41+ */ #define WEAK __weak diff --git a/firmware/atmel_softpack_libraries/usb/include/USBD.h b/firmware/atmel_softpack_libraries/usb/include/USBD.h index 6fc931f..6eeb68a 100644 --- a/firmware/atmel_softpack_libraries/usb/include/USBD.h +++ b/firmware/atmel_softpack_libraries/usb/include/USBD.h @@ -63,7 +63,7 @@ *------------------------------------------------------------------------------*/ /* Define attribute */ -#if defined ( __CC_ARM ) /* Keil µVision 4 */ +#if defined ( __CC_ARM ) /* Keil ÂµVision 4 */ #define WEAK __attribute__ ((weak)) #elif defined ( __ICCARM__ ) /* IAR Ewarm 5.41+ */ #define WEAK __weak diff --git a/firmware/atmel_softpack_libraries/usb/include/USBDescriptors.h b/firmware/atmel_softpack_libraries/usb/include/USBDescriptors.h index 84b5ef6..aada0f1 100644 --- a/firmware/atmel_softpack_libraries/usb/include/USBDescriptors.h +++ b/firmware/atmel_softpack_libraries/usb/include/USBDescriptors.h @@ -296,7 +296,7 @@ */ #pragma pack(1) -#if defined ( __CC_ARM ) /* Keil µVision 4 */ +#if defined ( __CC_ARM ) /* Keil ÂµVision 4 */ #elif defined ( __ICCARM__ ) /* IAR Ewarm 5.41+ */ #define __attribute__(...) #elif defined ( __GNUC__ ) /* GCC CS3 2009q3-68 */ diff --git a/firmware/libcommon/include/cciddriver.h b/firmware/libcommon/include/cciddriver.h index f9be027..df77fa3 100644 --- a/firmware/libcommon/include/cciddriver.h +++ b/firmware/libcommon/include/cciddriver.h @@ -175,11 +175,11 @@ { /// Number of seconds. If 00h then CCID default value is used. unsigned char bTimeOut; - /// Several parameters for the PIN format options (defined in § 6.1.11.4) + /// Several parameters for the PIN format options (defined in Â§ 6.1.11.4) unsigned char bmFormatString4; /// Define the length of the PIN to present in the APDU command unsigned char bmPINBlockString; - /// Allows the length PIN insertion in the APDU command (defined in § 6.1.11.6) + /// Allows the length PIN insertion in the APDU command (defined in Â§ 6.1.11.6) unsigned char bmPinLengthFormat; /// Insertion position offset in byte for the current PIN unsigned char bInsertionOffsetOld; @@ -218,13 +218,13 @@ /// Protocol Data Structure for Protocol T=0 (bProtocolNum=0, dwLength=00000005h) typedef struct { - /// B7-4 FI Index into the table 7 in ISO/IEC 7816-3:1997 selecting a + /// B7-4 - FI - Index into the table 7 in ISO/IEC 7816-3:1997 selecting a /// clock rate conversion factor - /// B3-0 DI - Index into the table 8 in ISO/IEC 7816-3:1997 selecting a + /// B3-0 - DI - Index into the table 8 in ISO/IEC 7816-3:1997 selecting a /// baud rate conversion factor unsigned char bmFindexDindex; - /// For T=0 ,B0 0b, B7-2 000000b - /// B1 Convention used (b1=0 for direct, b1=1 for inverse) + /// For T=0 ,B0 - 0b, B7-2 - 000000b + /// B1 - Convention used (b1=0 for direct, b1=1 for inverse) unsigned char bmTCCKST0; // 0 to 2 /// Extra Guardtime between two characters. Add 0 to 254 etu to the normal /// guardtime of 12etu. FFh is the same as 00h. @@ -243,14 +243,14 @@ /// Protocol Data Structure for Protocol T=1 (bProtocolNum=1, dwLength=00000007h) typedef struct { - /// B7-4 FI Index into the table 7 in ISO/IEC 7816-3:1997 selecting a + /// B7-4 - FI - Index into the table 7 in ISO/IEC 7816-3:1997 selecting a /// clock rate conversion factor - /// B3-0 DI - Index into the table 8 in ISO/IEC 7816-3:1997 selecting a + /// B3-0 - DI - Index into the table 8 in ISO/IEC 7816-3:1997 selecting a /// baud rate conversion factor unsigned char bmFindexDindex; - /// For T=1, B7-2 000100b - /// B0 Checksum type (b0=0 for LRC, b0=1 for CRC - /// B1 Convention used (b1=0 for direct, b1=1 for inverse) + /// For T=1, B7-2 - 000100b + /// B0 - Checksum type (b0=0 for LRC, b0=1 for CRC + /// B1 - Convention used (b1=0 for direct, b1=1 for inverse) unsigned char bmTCCKST1; // 10h, 11h, 12h, 13h /// Extra Guardtime (0 to 254 etu between two characters). /// If value is FFh, then guardtime is reduced by 1. @@ -292,8 +292,8 @@ /// - 04h 1.8V /// Other bits are RFU. unsigned char bVoltageSupport; - /// RRRR Upper Word- is RFU = 0000h - /// PPPP Lower Word- Encodes the supported protocol types. A 1 in a given + /// RRRR -Upper Word- is RFU = 0000h + /// PPPP -Lower Word- Encodes the supported protocol types. A "1" in a given /// bit position indicates support for the associated ISO protocol. /// 0001h = Protocol T=0 /// 0002h = Protocol T=1 @@ -318,7 +318,7 @@ /// Indicates the maximum IFSD supported by CCID for protocol T=1. unsigned long dwMaxIFSD; /// - RRRR-Upper Word- is RFU = 0000h - /// - PPPP-Lower Word- encodes the supported protocol types. A 1 in a given + /// - PPPP-Lower Word- encodes the supported protocol types. A "1" in a given /// bit position indicates support for the associated protocol. /// 0001h indicates support for the 2-wire protocol 1 /// 0002h indicates support for the 3-wire protocol 1 diff --git a/firmware/libcommon/source/cciddriver.c b/firmware/libcommon/source/cciddriver.c index dfadd6b..b4ff451 100644 --- a/firmware/libcommon/source/cciddriver.c +++ b/firmware/libcommon/source/cciddriver.c @@ -193,8 +193,8 @@ ccidDriver.ProtocolDataStructure[0] = Atr[2]; // TA(1) // bmTCCKST0 - // For T=0 ,B0 0b, B7-2 000000b - // B1 Convention used (b1=0 for direct, b1=1 for inverse) + // For T=0 ,B0 - 0b, B7-2 - 000000b + // B1 - Convention used (b1=0 for direct, b1=1 for inverse) // bGuardTimeT0 // Extra Guardtime between two characters. Add 0 to 254 etu to the normal @@ -1005,7 +1005,7 @@ //------------------------------------------------------------------------------ /// Interrupt-IN Messages /// This message is sent when any bit in the bHardwareErrorCode field is set. -/// If this message is sent when there is no outstanding command, the bSeq +/// If this message is sent when there is no "outstanding" command, the bSeq /// field will be undefined. /// \param bSlot ICC slot number /// \param bSeq Sequence number of the bulk OUT command when the hardware error -- To view, visit https://gerrit.osmocom.org/c/simtrace2/+/32489 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: simtrace2 Gerrit-Branch: master Gerrit-Change-Id: Iac9f64895e4e10b677c23e47b95712dbb5e98cf1 Gerrit-Change-Number: 32489 Gerrit-PatchSet: 1 Gerrit-Owner: osmith <osmith(a)sysmocom.de> Gerrit-MessageType: newchange

2 years, 2 months

1
0
0 0

[M] Change in osmocom-bb[master]: layer23: vty: Move imei related commands to common/

by pespin

pespin has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmocom-bb/+/32488 ) Change subject: layer23: vty: Move imei related commands to common/ ...................................................................... layer23: vty: Move imei related commands to common/ Change-Id: I3c71586c0eb437ce63beaae5adf8fac6c27e2896 --- M src/host/layer23/src/common/vty.c M src/host/layer23/src/mobile/vty_interface.c 2 files changed, 75 insertions(+), 58 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmocom-bb refs/changes/88/32488/1 diff --git a/src/host/layer23/src/common/vty.c b/src/host/layer23/src/common/vty.c index 3889cdc..09967d2 100644 --- a/src/host/layer23/src/common/vty.c +++ b/src/host/layer23/src/common/vty.c @@ -153,6 +153,7 @@ /* placeholder for layer23 shared MS info to be dumped */ void l23_ms_dump(struct osmocom_ms *ms, struct vty *vty) { + struct gsm_settings *set = &ms->settings; char *service = ""; if (!ms->started) @@ -189,6 +190,14 @@ (ms->shutdown != MS_SHUTDOWN_NONE || !ms->started) ? "down" : "up", (ms->shutdown == MS_SHUTDOWN_NONE) ? service : "", VTY_NEWLINE); + + vty_out(vty, " IMEI: %s%s", set->imei, VTY_NEWLINE); + vty_out(vty, " IMEISV: %s%s", set->imeisv, VTY_NEWLINE); + if (set->imei_random) + vty_out(vty, " IMEI generation: random (%d trailing " + "digits)%s", set->imei_random, VTY_NEWLINE); + else + vty_out(vty, " IMEI generation: fixed%s", VTY_NEWLINE); } /* CONFIG NODE: */ @@ -796,6 +805,53 @@ return CMD_SUCCESS; } +DEFUN(cfg_ms_imei, cfg_ms_imei_cmd, "imei IMEI [SV]", + "Set IMEI (enter without control digit)\n15 Digits IMEI\n" + "Software version digit") +{ + struct osmocom_ms *ms = vty->index; + struct gsm_settings *set = &ms->settings; + char *error, *sv = "0"; + + if (argc >= 2) + sv = (char *)argv[1]; + + error = gsm_check_imei(argv[0], sv); + if (error) { + vty_out(vty, "%s%s", error, VTY_NEWLINE); + return CMD_WARNING; + } + + OSMO_STRLCPY_ARRAY(set->imei, argv[0]); + OSMO_STRLCPY_ARRAY(set->imeisv, argv[0]); + OSMO_STRLCPY_ARRAY(set->imeisv + 15, sv); + + return CMD_SUCCESS; +} + +DEFUN(cfg_ms_imei_fixed, cfg_ms_imei_fixed_cmd, "imei-fixed", + "Use fixed IMEI on every power on") +{ + struct osmocom_ms *ms = vty->index; + struct gsm_settings *set = &ms->settings; + + set->imei_random = 0; + + return CMD_SUCCESS; +} + +DEFUN(cfg_ms_imei_random, cfg_ms_imei_random_cmd, "imei-random <0-15>", + "Use random IMEI on every power on\n" + "Number of trailing digits to randomize") +{ + struct osmocom_ms *ms = vty->index; + struct gsm_settings *set = &ms->settings; + + set->imei_random = atoi(argv[0]); + + return CMD_SUCCESS; +} + DEFUN(cfg_ms_sim, cfg_ms_sim_cmd, "sim (none|reader|test|sap)", "Set SIM card to attach when powering on\nAttach no SIM\n" "Attach SIM from reader\nAttach build in test SIM\n" @@ -1192,6 +1248,13 @@ vty_out(vty, "%slayer2-socket %s%s", prefix, set->layer2_socket_path, VTY_NEWLINE); + vty_out(vty, "%simei %s %s%s", prefix, set->imei, + set->imeisv + strlen(set->imei), VTY_NEWLINE); + if (set->imei_random) + vty_out(vty, "%simei-random %d%s", prefix, set->imei_random, VTY_NEWLINE); + else if (!l23_vty_hide_default) + vty_out(vty, "%simei-fixed%s", prefix, VTY_NEWLINE); + switch (set->sim_type) { case GSM_SIM_TYPE_NONE: vty_out(vty, "%ssim none%s", prefix, VTY_NEWLINE); @@ -1296,6 +1359,9 @@ install_node(&ms_node, config_write_ms_node_cb); install_element(MS_NODE, &cfg_ms_layer2_cmd); + install_element(MS_NODE, &cfg_ms_imei_cmd); + install_element(MS_NODE, &cfg_ms_imei_fixed_cmd); + install_element(MS_NODE, &cfg_ms_imei_random_cmd); install_element(MS_NODE, &cfg_ms_sim_cmd); install_element(MS_NODE, &cfg_ms_testsim_cmd); install_node(&testsim_node, NULL); diff --git a/src/host/layer23/src/mobile/vty_interface.c b/src/host/layer23/src/mobile/vty_interface.c index 10e2882..260efca 100644 --- a/src/host/layer23/src/mobile/vty_interface.c +++ b/src/host/layer23/src/mobile/vty_interface.c @@ -932,14 +932,6 @@ } vty_out(vty, " network-selection-mode %s%s", (set->plmn_mode == PLMN_MODE_AUTO) ? "auto" : "manual", VTY_NEWLINE); - vty_out(vty, " imei %s %s%s", set->imei, - set->imeisv + strlen(set->imei), VTY_NEWLINE); - if (set->imei_random) - vty_out(vty, " imei-random %d%s", set->imei_random, - VTY_NEWLINE); - else - if (!l23_vty_hide_default) - vty_out(vty, " imei-fixed%s", VTY_NEWLINE); if (set->emergency_imsi[0]) vty_out(vty, " emergency-imsi %s%s", set->emergency_imsi, VTY_NEWLINE); @@ -1239,53 +1231,6 @@ return CMD_SUCCESS; } -DEFUN(cfg_ms_imei, cfg_ms_imei_cmd, "imei IMEI [SV]", - "Set IMEI (enter without control digit)\n15 Digits IMEI\n" - "Software version digit") -{ - struct osmocom_ms *ms = vty->index; - struct gsm_settings *set = &ms->settings; - char *error, *sv = "0"; - - if (argc >= 2) - sv = (char *)argv[1]; - - error = gsm_check_imei(argv[0], sv); - if (error) { - vty_out(vty, "%s%s", error, VTY_NEWLINE); - return CMD_WARNING; - } - - strcpy(set->imei, argv[0]); - strcpy(set->imeisv, argv[0]); - strcpy(set->imeisv + 15, sv); - - return CMD_SUCCESS; -} - -DEFUN(cfg_ms_imei_fixed, cfg_ms_imei_fixed_cmd, "imei-fixed", - "Use fixed IMEI on every power on") -{ - struct osmocom_ms *ms = vty->index; - struct gsm_settings *set = &ms->settings; - - set->imei_random = 0; - - return CMD_SUCCESS; -} - -DEFUN(cfg_ms_imei_random, cfg_ms_imei_random_cmd, "imei-random <0-15>", - "Use random IMEI on every power on\n" - "Number of trailing digits to randomize") -{ - struct osmocom_ms *ms = vty->index; - struct gsm_settings *set = &ms->settings; - - set->imei_random = atoi(argv[0]); - - return CMD_SUCCESS; -} - DEFUN(cfg_ms_emerg_imsi, cfg_ms_emerg_imsi_cmd, "emergency-imsi IMSI", "Use special IMSI for emergency calls\n15 digits IMSI") { @@ -2348,9 +2293,6 @@ install_element(MS_NODE, &cfg_ms_mncc_handler_cmd); install_element(MS_NODE, &cfg_ms_no_mncc_handler_cmd); install_element(MS_NODE, &cfg_ms_mode_cmd); - install_element(MS_NODE, &cfg_ms_imei_cmd); - install_element(MS_NODE, &cfg_ms_imei_fixed_cmd); - install_element(MS_NODE, &cfg_ms_imei_random_cmd); install_element(MS_NODE, &cfg_ms_no_emerg_imsi_cmd); install_element(MS_NODE, &cfg_ms_emerg_imsi_cmd); install_element(MS_NODE, &cfg_ms_no_sms_sca_cmd); -- To view, visit https://gerrit.osmocom.org/c/osmocom-bb/+/32488 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmocom-bb Gerrit-Branch: master Gerrit-Change-Id: I3c71586c0eb437ce63beaae5adf8fac6c27e2896 Gerrit-Change-Number: 32488 Gerrit-PatchSet: 1 Gerrit-Owner: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: newchange

2 years, 2 months

1
0
0 0

[L] Change in osmocom-bb[master]: layer23: vty: Move sim related commands to common/

by pespin

Hello Jenkins Builder, I'd like you to reexamine a change. Please visit https://gerrit.osmocom.org/c/osmocom-bb/+/32441 to look at the new patch set (#2). Change subject: layer23: vty: Move sim related commands to common/ ...................................................................... layer23: vty: Move sim related commands to common/ Change-Id: I9e95732255c248b000f1045c395a15217d10db78 --- M src/host/layer23/src/common/vty.c M src/host/layer23/src/mobile/vty_interface.c 2 files changed, 368 insertions(+), 356 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmocom-bb refs/changes/41/32441/2 -- To view, visit https://gerrit.osmocom.org/c/osmocom-bb/+/32441 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmocom-bb Gerrit-Branch: master Gerrit-Change-Id: I9e95732255c248b000f1045c395a15217d10db78 Gerrit-Change-Number: 32441 Gerrit-PatchSet: 2 Gerrit-Owner: pespin <pespin(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-MessageType: newpatchset

2 years, 2 months

1
0
0 0

2025

2024

2023

2022

gerrit-log April 2023