osmocom-commitlog

osmocom-commitlog@lists.osmocom.org

7948 discussions

osmo-bts.git branch laforge/sob-bts-pa-ctrl created. 0.3.0-281-g398459b

by gitosis＠osmocom.org

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Osmocom BTS-side code (Abis, scheduling, ...)". The branch, laforge/sob-bts-pa-ctrl has been created at 398459b5998ed1a3f9b82d6ca85f0c62e55445ba (commit) - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-bts/commit/?id=398459b5998ed1a3f9b82d6ca85f0c6… commit 398459b5998ed1a3f9b82d6ca85f0c62e55445ba Author: Harald Welte <laforge(a)gnumonks.org> Date: Sun Feb 15 19:48:34 2015 +0100 Add code to control the PA of the SOB-BTS At least in v1 of the SOB-BTS, there is a SX1502 I2C GPIO expander to control the two different PAs in the system. This adds a SX150x driver on top of Linux userspae i2c-dev access, and a thin layer of API functions as well as a command line tool. The code is currently still untested. ----------------------------------------------------------------------- hooks/post-receive -- Osmocom BTS-side code (Abis, scheduling, ...)

10 years, 4 months

openbsc.git annotated tag 0.14.0 created. 0.14.0

by gitosis＠osmocom.org

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)". The annotated tag, 0.14.0 has been created at 0a3f09b5882f01446300f29c041ca50b6e31e376 (tag) tagging 66105fd3dc043e0f8011e1fa47864611936dd6aa (commit) replaces 0.13.0 tagged by Holger Hans Peter Freyther on Thu Feb 12 14:08:56 2015 +0100 - Log ----------------------------------------------------------------- This is 0.14.0 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEYEABECAAYFAlTcpe0ACgkQGckbdURWU2qFGgCfeGFka+mQVl2h/r2DROnV35KB LZIAn3n2qSpJ4AlQqV8Fk4AMNt4AeQnr =3axZ -----END PGP SIGNATURE----- Alexander Chemeris (12): sgsn: Fix lengths of MS Network Capability and MS Radio Access Capability elements. Fix copy-paste error in console output in db_test. Fix typo ',' -> ';' at the end of a line. Fix typo in console output: "PEROIDOC" -> "PERIODIC". sms: Possiqble meamleak fix gsm340_rx_tpdu() nitb: Add "subscriber create" VTY command. abis: Consistent usage of LOGP/DEBUGP for "RSL CONNECT NACK" db: Remove the german from the log message db: Add more tests for retrieving subscribers from a DB. db,sms: Rename db_sms_mark_sent() to db_sms_mark_delivered() sms: Rename gsm340_gen_tpdu() to gsm340_gen_sms_deliver_tpdu() sms: Do not store received id in the SMS database. Alexander Huemer (2): Makefile.am: Use AM_CPPFLAGS ussd: Fix test for RELEASE COMPLETE Andreas Eversberg (18): Add VTY option to set GPRS network-control-order to enable MS measurements Fix: Handle CM service request on already secured channel correctly Fix: Handle CM service request on already secured channel correctly Fix: Nokia requires VTY's "oml e1" parameters also Add EFR support to TRAU muxer + test case Add VTY option for Nokia BTS that does not send RELease CONFirm message Each BTS can be configured for speech support (other than GSM full rate) Remove obsolete check of conn and lchan pointers not beeing NULL Use 'defines' for length and duration of RTP payload Add function to update TRAU muxer after assignment or handover mncc: Complete definitions for all speech traffic frames at MNCC interface mncc: Use helper function to check if an MNCC frame is data (speech/traffic) mncc: Add support for half rate V1 frames to MNCC/RTP interface Add check to tch_map(), if RTP sockets exist bsc_api/NITB: If TCH/H channel is used, indicate it to bsc_api Add support for AMR frames to MNCC/RTP interface dyn PDCH: Cleanup of rsl_chan_activate_lchan() and users MNCC: Add IMSI to CALL CONFIRM message Ciaby (1): nitb: Add a test for "show network" in the python testsuite. Daniel Willmann (13): smpp_smsc: Fix socket read() error handling smpp_smsc: Check that the size is large enough to hold actual data smpp_smsc: Fix integer overflow in read return value and msgb_alloc() rtp_proxy: Prevent out-of-bounds read in rtcp_sdes_cname_mangle bsc_hack: Don't strdup the string arguments libbsc, osmo-bsc{, _nat}: Prevent unaligned access when casting TLVP_VAL gprs_llc: Prevent llme_alloc/lle_init from reading invalid memory systemd: Add Install section to service files gprs_sgsn.h: Add two macros to log details of MM/PDP contexts gprs: Improve loglevels and log messages for SGSN gprs: Move log message about mm context after NULL check libbsc/system_information.c: Fix off-by-one error in si4 generation with CBCH enabled libbsc/chan_alloc: Fix size of pchan to hold the +CBCH channels as well Harald Welte (68): Fix osmo-nitb build without libsmpp SMPP: Respond with BIND_TRX_RESP to BIND_TRX, not BIND_TX_RESP SMPP: Pass on 0xFx style DCS from SMPP to GSM SMPP: Add new 'dcs_transparent' ESME setting osmo-bsc VTY: fix saving of codec-list GPRS LLC: Add non-standard method of sequence number recovery bsc_vty: Print human-readable string version of NM ADM STATE ctrlif: Flush/Clear write_queue when closing the control socket smpp_openbsc: Fix parsing of 03.38 data coding scheme in MO case Fix license header at smpp_openbsc.c and smpp_smsc.c sgsn: add a minimalistic ACL sgsn: Add "auth-policy" VTY command to enable/disable ACL remove 'bind early' from osmo-bsc_mgcp example config SMPP: complete the VTY help/documentation sgsn: spelling fixes inside comments SMPP: don't get stuck in case of SMS memory exceeded SMPP: convert a SMMA to a SMPP ALERT NOTIFICATION SMPP: use VTY setting for E212/E164 in ALERT NOTIFICATION SMPP: add missing VTY parameter 'deliver-src-imsi' for ESME osmo-nitb: don't print 'bac_hack' in usage/help output Make gsm48_lchan2chan_desc() reflect a ts-specific TSC Do not expect all BTSs support TSC != BCC TSC: Add new gsm_ts_tsc() function to resolve TSC of TS Fix more hidden TSC bugs for Ericsson BTS SMPP: UCS2 data_coding is 0x08, not 0x80! rtp_proxy: Simplify AMR handling rtp_proxy.c: Correctly set msg_type to GSM_TCH_FRAME_AMR on AMR chan_alloc: Fall-back to TCH/H, if we cannot find a TCH/F trau_mux.c: Prevent out-of-bounds read in trau_encode_fr() DB: produce a backtrace in case of a DB error vty: Fix interactive VTY help for silent-sms transmission ipaccess-proxy: avoid namespace collision with libosmo-abis adopt recent IPA related symbol rename Fix control interface build after IPA rename/migration move libctrl from openbsc to libosmoctrl (libosmocore.git) ctrl_if: Split bsc_ctrl_cmd_handle() in two parts libctrl: Move bulk of node lookup code into libosmocore libctrl: Follow rename of controlif_setup -> ctrl_interface_setup configure.ac: Depend on libosmocore 0.7.0 Fix bsc_ctrl_node_lookup after libctrl changes fix missing '\' at end of line in Makefile.am move gsm_bts_num() to gsm_data_shared.[ch] gsm_data_shared: Add new trx_power_params for osmo-bts move GSM_RESERVED_TMSI to libosmocore Use port number #defines for VTY and CTRL ports port over to libosmocore include/osmocom/gsm/meas_rep.h Add basic support for CBCH / SMS-CB (Cell Brroadcast) move gsm_bts_get_cbch() to gsm_data_shared() as its needed in osmo-bts chan_alloc.c: Don't remove SDCCH/8 without CBCH chan_alloc: Fix missing break statement rtp_proxy: Remove dead code Fix most compiler warnings with gcc-4.9.2 convert away from deprecated gsm_7bit_{encode,decode}() functions chan_alloc: remove ts_alloc() and ts_free() Initial support for export + curses-visualization of measurements meas_vis: assign bar colors depending on level, display RxQual meas_vis: Add header and print TA + TO values build meas_vis only if libcdk is available meas_feed: Add tool to read meas_feed PCAP and write it to sqlite3 meas_feed: add osmo-meas-udp2db for realtime feed into database meas_feed.c: Fix compiler warning Merge branch 'laforge/meas_vis' SMS: Attempting to send SMS is not a NOTICEable event Don't return an error to caller if we are out of lchan on CHAN RQD RSL: Change "... is back in operation" to an INFO level message debug.c: use new libosmocore features to print and save log filter meas_pcap2db.c: Fix build without CDK Revert "debug.c: use new libosmocore features to print and save log filter" Henning Heinold (1): systemd: use Wants for the dependency btw. osmo-bsc-mgcp and osmo-bsc Holger Hans Peter Freyther (370): db: Link to the VTY library for the vty_config_unlock symbol bsc-ctrl: Fix a potential memory leak on failed verification nat: Fix authentication by-pass using shorter tokens sysmobts: Add the necessary data structure and init for the SAPI queue debian: Fix the installation of the sgsn example data nat: Address the FIXME and send the MDCX down to the BSC nat: Move all methods sending a response to the callagent to a single place nat: Make it possible to send MGCP messages through the IPA multiplex nat: We want the remote to respond to our DLCX request nat: Reword the log messages as this is normal operation nat: Do not allow the amount of pending responses to grow infinitely nat: Include the sccp_src_ref and sccp_dst_ref for this call nat: Name the variable more properly and begin with net.1.bsc.%d Merge commit 'zecke/mgcp-statistics' nat: Allow to daemonize the NAT process nat: Allow to re-write international numbers in the CC Setup messages debian: Begin the 0.13.0 series with a new changelog entry nat: Rename "struct sccp_connections" to "struct nat_sccp_connection" nat: Extract the LAC/CI from the Complete Layer3 Information ctrl: Make the commands static to not pollute the namespace ctrl: Provide a reply in case the range check failed nat: Add an example for a black list nat: Move the callstats to a new header file due sccp usage nat: Use memcmp for the token on the USSD interface as well smpp: Attempt to fix a memory leak of the msgb nat: Include LAC/CI as TV values at the end of the 'status' message sysmobts: Avoid a crash when trying to look-up a BTS sysmobts: Initialize the NM signal handler only once in a mixed network sysmobts: Make the nanoBTS NM code work for the sysmobts ipaccess: Remove the ipaccess_gsmnet and assume there is a bsc_gsmnet Merge branch 'zecke/features/sysmobts' channels: Mark channels as broken that time out on activation/release mgcp: Initialize the tone to CHAR_MAX as this might not be a request vty: Print the state of all GPRS OML objects in show bts smpp: Only write the systemd-id if it is not empty misc: Ignore compiled python code and another test case tests: Add a custom test runner to test the VTY functionality. nanobts: Do not crash on an invalid TRX number isdnsync: Remove a double close of the isdn device ipaccess-find: Address a warning by coverity of unitialized memory mgcp: Make sure the save pointer is initialized with NULL. nat: Fix compiler warning and cast uint16_t to uint8_t hsl: Remove the support for the HSL bts from OpenBSC sgsn: Fix logically dead code in regard to the osmo_fd_register sgsn_vty: Fix uninitialized variable in the gprs_apn2str method sgsn: Fix the unimplemented/uninstalled show ggsn command ipaccess-config: Fix a resource leak in an error path ipaccess-config: Add missing break to parsing the -L option nat: The second call didn't really add anything to the test. gsm_subscriber: Fix compiler warning of the printf string db: Fix an issue with the memset nitb: Add a missing NULL check for searching the subscriber nat: Please coverity and initialize the saveptr to NULL nat: Address coverity warning about uninitialized addr nat: number could point to an address on the stack that can be reused nat: The con variable is not assigned at this point mncc: Remove what we believe to be a tautology from the MNCC code nitb: The subscr->imsi is an array will never be NULL ipaccess: Fix a resource leak in case the stat is failing ipaccess: The proxy code checked the array but not the element smpp: Checking an array for NULL will always be false smpp: Fix possible NULL dereference of the emse->acl smpp: Add the classic check for osmo_fd_register smpp: Close the file descriptor when we can't accept the SMSC conn oml: Add a missing break switch for NM_OC_BS11 misc: Fix compilation warnings smpp: Move the coding/mode detection into a utils file expiration: Print the "expire_lu" time in show subscriber expiration: Speculative fixes for the periodic expiring handling expiration: Allow to disable the periodic location updating procedure tests: TestCase.assertGreater is not available on Python 2.5 gprs: Fix a typo in the comment gprs_sgsn: In case of a Activate PDP Context timeout we should free pdp gprs_llc: Lookup lle based on the real TLLI gprs_llc: Work on finding the right LLE/LLME in case of routing area update gprs_llc: Assert that we send frames with either tlli or old_tlli gprs_gmm: Avoid assertion in the sending code during routing area update nat: Add a no number-rewrite command and call it through a VTY test nat: Introduce a prefix lookup tree (trie) for number rewriting nat: Allow to use the prefix lookup to rewrite numbers nat: Fix some memory leaks in the testcases. nat: Implement a post-routing for the NAT software nat: Use the DCC region for number rewriting and increase debug output Merge branch 'zecke/features/big-rewrite' Merge branch 'laforge/smpp-fixes' nat: Misc changes spotted while going through the file with Jacob nat: Fix potential memory leak when reading a message nat: Add example bsc entry for pablo nanobts: Fix initialization of two concurrent BTS. bsc: Fix compiler warning about undeclare functions nat: Use bsc_nat_msc_is_connected instead of accessing it directly nat: Attempt to follow the MODULE_METHOD pattern for methods vty: Attempt to fix the build when SMPP is not enabled bsc_msc: Add a name field to the MSC Connection to differentiate links bsc_msc: Stop the re-connect timer in case the msc is lost nat: Fix the log message of the code in case of an allocation failure nat: Remember the original dest local reference in the parsed struct bsc_msc: Fix possible null pointer dereference vty: Cosmetic change to the writing of the bts->model nat: Fix make distcheck for the nat smpp: Fix the make distcheck for smpp osmo-bts: Kill the different ROLE_BSC as e1inp_sign_link is used now db: Remove the struct gsm_network from the database layer misc: Require libosmocore 0.6.4 and libosmogb 0.6.4 gbproxy: Add a command to delete peers from the GBProxy bts: Add a flag to remember the kind of activation/release Revert "bsc/ussd: Send faked CM Service Accept before sending USSD" gbproxy: The "[stats]" option was not documented, document it shared: Introduce/Add procedure pending to the MO ipa: Explain that one needs to get the IP address of the BTS as argument rtp: Take the parameter from the arguments bsc: Use the right string for the notification bsc: Add a VTY command to show the paging group for a BSC/IMSI Merge branch 'jerlbeck/mgcp-cleanups' Merge remote-tracking branch 'jerlbeck/features/rtp-header-patching' debian: Build debug packages for each of the target packages debian: Enable hardening for the OpenBSC packages mgcp: Address compiler error for sprintf misusage... build: Ignore file generated by automake smpp_mirror: Initialize rc when cmd_id is not DELIVER_SM subscriber: Address coverity warning and truncate the IMSI vty: Address coverity issue with subscr->name never being NULL ipa-proxy: Socket creation can fail, address coverity issue si: Make sure to not overwrite orig_arfcn_hi in the range encoding build: Remove bogus depends from ipaccess-config build: osmo-nitb does not use dlopen/dlsym remove LIBRARY_DL build: channel_test does not use dlopen/dlsym remove LIBRARY_DL dep build: db_test does not use dlopen/dlsym.. remove LIBRARY_DL from deps Merge branch 'jerlbeck/features/mgcp-get-info-from-sdp' ussd: Move to use gsm_7bit_encode_n_ussd for USSD encoding sms: Move to gsm_7bit_encode_n in the sms sending code gsm_04_11: Speculative fix for MT SMS and SAPI 'n Reject Revert "gsm_04_11: Speculative fix for MT SMS and SAPI 'n Reject" periodic/lu: Attempt to implicitly attach a subscriber instead of rejecting lu crash: Fix a crash that likely occurred during the LU procedure libmsc: Set the "trans->conn" to NULL to catch invalid usage bsc: Reduce the RLL timeout to be smaller than TC1/max_retr+1 db: Avoid crash we have seen with the dbi code when reading a SMS sms: Fix crash on RLL Establish Request timeouts with active call mncc: Add the context we get from the MNCC interface smpp: In case we know the receiver set the context for logging Merge remote-tracking branch 'origin/jerlbeck/features/range-encode' Merge branch 'jerlbeck/features/mgcp-rtp-keep-alive' nat: Introduce reject cause to bsc_nat_acc_lst_entry nat: Make the access-list deny cause configurable mgcp: Use the length modifier for the size_t in the printf mgcp: transit is a signed variable and should be printed like this mgcp: Round the frame time otherwise we have porting issues ctrl: Make the int range set, get and verify methods available ctrl: Make it possible to re-use the string get and set routine libbsc: Create the RF interface all the time bsc: rf_ctrl will always be created, remove the NULL checks tests: Remove unused file trau: Fix compiler warning about decoded_trau_frame sms: Increment the RP Message Reference for each transaction bsc: Add vty command to send location trap through VTY sms: Do not interfere with the SMS queue from within gsm_04_11 sms: Address the TODO and schedule the next SMS for an active subscriber libbsc: Add ctrl command for MNC, MCC, short-name and long-name libbsc: Add ctrl command to apply the configuration libbsc: Add command to set MNC/MCC and apply it if something changed bsc: Include the MCC/MNC in the location trap nat: Implement setting the access-control-name through CTRL interface nat: Introduce command to remove an access-list-name nat: Add CTRL command test case for the new control commands Merge branch 'zecke/features/extended-control' nitb/smpp: Add simple test runner for the issues found by daniel Merge branch 'daniel/smpp-fixes' systemd: Remove the second occurance of Restart=always mgcp: The valid payload types start at 0. Fix the VTY Merge branch 'jolly/mncc' systemd: Saying these services restart once should be enough systemd: Add service for the osmo-sgsn nitb/ctrl: Add ctrl command to set the TRX max_power_reduction nitb/ctrl: Add command to add/modify a subscriber to the database nitb/ctrl: Implement creating and deleting subscribers nitb/ctrl: Implement a command to list all active subscribers ctrl: Move the lookup into a separate file in preparation for GPRS sgsn/ctrl: Add ctrl interface, implement listing subscribers ctrl/abis: When the max_power_reduction changes, send it to the BTS nat/debian: Create an init script for the nat application gbproxy/debian: Add a start script for the GBproxy nat: Mention the the BSC the SCCP connection was on abis: Check for failure of ftell msc: Name is never NULL use strlen to check if it is empty bsc/msc: Extension can never be NULL use strlen instead sgsn: Comparing array to NULL is not useful rsl: Add missing breaks in the code gprs: Reduce the number of compiler warnings in gprs_gmm.c gprs: Fix compiler warnings in gprs_sndcp.c gprs: Fix compiler warnings in the gprs_llc.c code gprs: Fix compiler warnings in sgsn_libgtp.c gprs: Fix compiler warnings ini gprs_sndcp_vty.c gprs: Fix compiler warnings in sgsn_main.c oml: Fix compiler warning about aliasing ipa: Fix compiler warnings about aliasing bsc: Timers are in seconds, clarify that in the online help gbproxy: Fix the start script for gbproxy ctrl: Extend the testcase for using '09' as numbers on the interface sms: Kill the sms->sender and use addr/ton/npi throughout the code db: Add testcase for storing/loading/comparing a sms sms: Add code to migrate the database to the new schema db: Add testcase for the db migration. Merge branch 'zecke/features/sms-db-changes' db: Fix fall-out with the subscriber removal in the subscriber deletion code db: Fix next fall-out with make distcheck nat/bsc: Check proto before calling ipaccess_rcvmsg_base misc: Use the right mailinglist address for OpenBSC ctrl: Introduce a macro for read-only attributes and use it ctrl: Remove the param parameter as it was never used/implemented ctrl: Reduce code duplication and add a define to create the struct ctrl: Use CTRL_CMD_DEFINE_STRUCT in CTRL_CMD_DEFINE_RANGE mgcp: Remove excessive logging for each frame mgcp: Add proper length checking for line handling osmux: Fix potential memory leak in the msgb handling rsl: Remove obsolete FIXME comment. mgcp: Use #pragma once instead of a possible clashing #ifdef channel_test: Return a positive number to claim it was paged mgcp: Address scanf issue already found by cppcheck and now ASAN bsc: Introduce a local notification scheme for the CTRL interface lchan: Speculative "fix" for error and late reply rsl: Avoid double channel release procedure in error conditions rsl: Check if the channel is active and then start the channel release Merge branch 'hfreyther/fixes/channel-release-handling' osmux: Fix the VTY online help in the osmux command bsc: Do not use strdup on argv parameter proxy: Annotate the switch/case/fall through mgcp: Allow to batch more than four messages nitb: Only print channel activations once in show statistics db: Use ulonglong to access the database for sqlite3 gbproxy_test: Simplify the test setup by sharing code gbproxy_test: Reset the gbproxy before we reset GPRS NS nat: Fix the documentation issue with the osmux command rtp: Share the rtp header between the proxy and the mgcp code mgcp: Fix documentation issue in the force-ptime command mgcp: Verify that the force-ptime is written back to the file mgcp: Ignore the transcoding test gbproxy_test: Provide enough disabled categories to please valgrind osmux: Remove extra newline from the osmux log message bsc: Use the word core network and not backbone. osmux: Make sure to always use the right dummy sending method osmux: Be accurate. The label has been already created osmux: Mention where the data was coming from osmux: Now that we have IPv4/port we might want to consider to expire handles bsc: Implement a way to relay a message to the remote MSC gbproxy: Fix the NAME in the start script... smpp: Fix small typo in the comment trau_mux.c: Prevent out-of-bounds read in trau_decode_fr() mgcp: Fix memory leak in the transcoding code mgcp: Provide more information about configured endpoints mgcp: Mention the packet duration in the error message mgcp: Warn when the buffer is being reset due a wrong seq number mgcp: Re-factor testcase to separate test and setup mgcp: Do not use errx as finding a test failure is too hard mgcp: Capture the return value of the of the transcode function mgcp: Make the internal state of the transcoder accessible Merge branch 'zecke/fixes/mgcp-transociding-tests' mgcp: Add a comment about the return of the function mgcp: Patch and Count _after_ the transcoding mgcp: Fix/test reading/writing the sequence number mgcp: Document transcoding semantic and follow it mgcp: Initialise next_time in case the initial timestamp is not 0. mgcp: Add a testcase for 160->80 ptime handling mgcp: Fix/test the case of a time jump and the resync Merge commit 'zecke/fixes/mgcp-transcoding' mgcp: Change API to remove memory management from the name osmux: Using the "CI" and calling it "CID" is plain wrong osmux: Send the CI as part of the dummy to help to identify a client osmux: Extract the dummy message, find the endpoint and set rtp port osmux: Qualify the handle by IPv4 address _and_ port osmux: Drop the message in case we don't know the remote yet. Merge branch 'zecke/fixes/osmux-nat' bts: Remember the last AMR mode that we received trau: Cast to remove compiler warning openbsc: Add new fields for the osmo-bts software gbproxy: Move the VTY code into the vty file and create public API gbproxy: Correct the method name. We work on TLLIs gbproxy: Remove the global rate counter and place it in the config gbproxy: Have a clear namespace for the public functions gbproxy: The dump routines are only used by the test, move it there gbproxy: Use gbproxy_ for all structures gprs: Create a gprs_utils file and move to be shared code in there gbproxy: Use gbprox_delete_tlli if possible gprs: Add testcases for the APN string/octet conversion and fix it gprs: The methods moved to gprs_utils.h remove them here gbproxy: Remove global state from the gbproxy gbproxy: Add a hint to the compiler that all parameters are not NULL gbproxy: Kill the global gbprox_global_patch_state struct gbproxy/test: Test TLLI expiry sgsn: Make P-TMSI a local TLLI to avoid clash ctrl: Allow the value to contain spaces. No need to split the string bsc: Add a ctrl command to send a ussdNotify for a call sysmobts: Add variable for N(S) + 1 needed for the sysmobts misc: Introduce a more neutral configure option for CTRL/VTY Merge Jacob's GPRS GB Proxy related configs gprs: Link gbproxy to -lrt for clock_gettime gprs: Attempt to fix distcheck by adding the header file gprs: Document the stale option in delete-gbproxy-tlli nat: Fix compiler warning about unknown prototype nat: Remove the entry from the list before we destroy it nat: Introduce a config free for the test and fix valgrind issues mgcp: Use the rtp_hdr structure and extract ts/seq from there mgcp: Move the "codec" params to a struct mgcp: Group codec reset and put it to a separate method. mgcp: Store one more codec/payload type if it is present mgcp: Deal with receiving another payload type Merge branch 'zecke/features/dynamic-codec-switch' mgcp: Use l16 in the test mgcp: Re-load the state after the transcoding change bsc: Add a "IPA PING" to the SCCP CR messages nitb: Don't mention the broken PCAP generation option bsc: Let the VTY verify that the timeout is a number mgcp: We only look at the RTP header use that in the comment mgcp: Move Annex A counting out of patch/count method mgcp: Do not detect the initial package as a wrap around mgcp: Count the incoming data instead of the modified one sgsn: Add boilerplate code for a SGSN test sgsn: Create testcase that verifies that llmes get deleted sgsn: Add test that exposes a dangling pointer to the LLME sgsn: Prevent memory leak and double free gprs: Fix typo in the comment bsc: Allow to disable sending ping/pong to the MSC ipa: Correct the prototype of these functions bts: Fail OML in case the channel combination is wrong bts: Allow to set the LAC through the CTRL interface mgcp: Allow to omit sending the audio name at all mgcp/sdp: Session name must not be empty pick an empty one bsc: Allow to apply configuration for an individual BTS bsc: Allow to set the call-identity bts: Store the bcch_change_mark in the bts structure bsc: Allow to generate new system information online bsc: Add ctrl command to set the TRX ARFCN ctrl: Add command to get the current load of a BTS ctrl: Allow to query if the OML link is connected or not nat: Fix copy and paste in the test code bts: Remove unused fields from the trx structure bts: Add some simple dependency between different BTS bts: When one link drops.. check what needs to be dropped ho: Make sure the timer is always stopped ho: Copy the multirate config to the new lchan db: Extend the test to mark a SMS as delivered and verify it rtp: Remove the "correction" of timestamps smscb: Prepare to fill in the info for CBCH in SI4 Partial revert "Fix most compiler warnings with gcc-4.9.2" misc: Ignore new binaries lchan: Remember why a channel is broken using static strings logging: Set the context for paging requests as well. logging: Only compare the subscr address meas: Unbreak the build once more gprs: Remove now unused authenticate flag mgcp: Honor the rtp IP_TOS settings for Osmux osmux: Initialize the socket only once sgsn: Remove MM from the list before gprs_subscr_delete is called sgsn: Remove the "permanent" subscriber cache gb_proxy: No need to copy optarg nitb: Allow the network to decide if a subscriber should be created nitb: Make the last change configurable meas: Add VTY documentation for the measurement commands meas: Install the scenario command and test it rsl: Remove unused code for channel activation ctrl/bsc: Fix copy and paste error and update text bsc/nitb: Allow to set the GPRS mode through the ctrl command osmo-bts: Introduce new struct for a power loop in the BTS code sgsn: Add easy APN commands with just the name smpp: Do not check conn for being null nat: getopt returns "static" data no need to copy it smpp: Fix potential crash in handling submitSM nitb: Move the rf-lock commands from osmo-bsc to libbsc ctrl: Add a command to check how many bts are configured ctrl: Implement a global result for rf_locked Ivan Kluchnikov (1): bsc: Add vty command for setting Access control classes. Jacob Erlbeck (404): nat/ussd: Add 'show ussd-connection' vty command bsc/ussd: Optionally send USSD message on MSC disconnection bsc/vty: Add 'no bsc-welcome-text' command vty: Fix BSC_NODE prompt string vty: Add test to check vty node hierarchy and related commands vty: Generalize ournode_exit() and ournode_end() vty: Use generic 'end' and 'exit' commands vty: Rename 'mgcp-through-msc-ipa' command to 'use-msc-ipa-for-mgcp' ussd: Send USSD on call setup on MSC errors vty: Hide unconfigured BTS on 'write' ctrl: Remember last 'rf_locked' control command ctrl: Add test script for the BSC control interface ctrl: Set a generic reply when it hasn'n been set bsc/mminfo: Patch timezone and DST in MM Info messages bsc: Add control command to set timezone gbproxy: Add test program to test gbproxy message handling gbproxy: Replace NS-VC references by NSEI gbproxy: Extended test program to simulate SGSN, too gbproxy: Fix warning and log message gbproxy: Add global and per peer counters gbproxy: Test invalid BVCI from SGSN gbproxy: Reject SGSN UNITDATA messages with an invalid BVCI vty: Fix whitespace in test script gbproxy: Add basic VTY tests gbproxy: Fix rate counter group leak in peer_free() gbproxy/vty: Enhance delete-gbproxy-peer command gbproxy: Add test for NSEI and NSVCI changes gbproxy: Fix handling of NSEI changes vty: Use vty_install_default() instead of bsc_install_default() vty: Enable the end/exit test for libosmocore nodes bsc/ussd: Send faked CM Service Accept before sending USSD bsc: Move gsm48_tx_mm_serv_ack/rej to gsm_04_08_utils.c bsc/ussd: Send faked CM Service Accept before sending USSD bsc/ussd: Rename bsc_send_ussd_notification() rtp: Fixed size check in padded RTP packets mgcp/rtp: Add counter for invalid RTP timestamp deltas mgcp/rtp: Add test case for RTP timestamp patching and stats mgcp/rtp: Fix timestamp offset when patching RTP packets mgcp: Rename for_each_line to for_each_non_empty_line mgcp: Add new for_each_line macro that also returns empty lines mgcp: Add tests for payload types in MGCP messages mgcp: Refactor MGCP/SDP parsing mgcp: NUL-terminate MGCP message mgcp/nat: Take payload type from SDP data mgcp: Handle SDP in CRCX received by the MGW mgcp/rtp: Add more test cases for RTP header patching mgcp/rtp: Fix output timing error counter mgcp/rtp: Add RTP header patch mode configuration mgcp/rtp: Change the log message shown when the SSRC changes mgcp/rtp: Only update RTP header field offsets if enabled mgcp/rtp: Compute default packet duration at state initialisiation mgcp/rtp: Use SSRC in proper byte ordering mgcp/rtp: Only patch SSRC once after MDCX if enabled mgcp/rtp: Fix RTP timestamps if enabled mgcp/rtp: Refactored packet_duration computation contrib/rtp: Enhance RTP replay tool contrib/rtp: Add tool to create RTP state files mgcp/rtp: Refactor timestamp offset calculation into own function mgcp/test: Output the packet duration after MGCP parsing mgcp: Put local connection options into a struct mgcp: Parse SDP to get rate and packet duration mgcp: Optionally send ptime in SDP contrib/rtp: Fix default payload case mgcp/test: Add test cases for constant RTP sequence number mgcp/test: Use differential output for counters and timestamp mgcp/rtp: Only patch timestamp alignment errors nitb: Set the DST field in generated MM info messages si: Add a config option to disable SI2ter/SI2bis/SI5ter/SI5bis messages si/test: Add tests for range encoding/decoding si/test: Merge si tests into gsm48 tests si: Fix range512 encoding si: Fix range1024 encoding si: Add generic range w(k) encoder si: Implement range 128, 256, 1024 encoding mgcp/rtp: Refactor mgcp_send to avoid code duplication mgcp/rtp: Add flag to disable RTP output mgcp/test: Test the connection mode parser mgcp/test: Reset pkt_period_* after each test mgcp/test: Show the number of dummy packets sent mgcp: Set output_enabled flags based on the MGCP mode mgcp/rtp: Make offset computation understandable mgcp/rtp: Send dummy packet to the RTCP destination, too mgcp: Send RTP keepalive dummy packets to net openbsc: Fix coverity issues mgcp: Disable output enabled on initialisation mgcp: Synchronize conn mode bits and output enabled flags mgcp/test: Don't reset conn_mode between messages sms/dtap: Add log messages to analyse SMS message loss mgcp/test: Only include conn_mode into test output mgcp/test: Fake wallclock for RTP timing/stats tests mgcp/rtp: Fix transit computation units mgcp/rtp: Compute delta timestamp based on wallclock mgcp/rtp: Base jitter calculation on input timestamps ipa: Use enhanced ipa_msg_recv_buffered() to cope with partioned IPA messages ipa: Be consistent in checking conn->cfg (Coverity) contrib/rtp: Use payload data files directly by gen_rtp_header ctrl: Fix handling of missing replies gprs/test: Use valid MCC/MNC for BVC RESET gprs: Separate LLC parsing from LLC state handling mgcp: Add callbacks for payload processing mgcp: Add audio info fields to struct mgcp_rtp_end mgcp: Add a function to get media info for MGCP responses mgcp: Only include SDP lines with valid content mgcp: Add RTP audio transcoding mgcp: Add CLI tool to test audio conversion mgcp: Add packet size (ptime) conversion mgcp: Extend the CLI transcoding tool by ptime conversion mgcp/test: Add test cases for transcoding and repacking mgcp: Move transcoding to libmgcp mgcp: Set net_end audio params in recvonly mode Merge remote-tracking branch 'origin/jerlbeck/features/mgcp-transcoding' mgcp/test: Add test case using the fmtp_extra info mgcp: Fix SDP formatting of fmtp_extra (Coverity) gprs: Use area terms LAI/RAI as defined in GSM 03.03 gprs/test: Remove verbose parameter of gbprox_dump_* functions gprs/test: Add connect_sgsn() function gprs/test: Add additional gbproxy tests gprs/test: Increase stderr log level gprs/test: Make test output more readable gprs: Use imsi field instead of imei gprs: Implement BSSGP MCC/MNC patching gprs: Add MCC/MNC patch support for LLC/GMM messages gprs: Add APN patch support for LLC/GSM messages gprs/test: Added GMM Info and fixed TLLI gprs/test: Add Detach messages to test gprs: Store gbproxy patching state per peer gprs: Track IMSI/TLLI to control APN patching gprs/vty: Add commands to manage the TLLI list gprs: Add counters related to LLC layer patching gprs/test: Rearrange for PTMSI parsing gprs: Fix TLLI cache size computation gprs: Add TLV parse functions gprs: Use shift functions instead of manual parsing gprs: Use struct to pass context information gprs: Parse PTMSI and update TLLI accordingly gprs: Move LLC IE length fix to BSSGP level gbproxy: Remove broken TLLI comparison gprs: Refactor gbprox_register_tlli() gbproxy: Track all TLLIs (not only LOCAL) gbproxy/test: Fix BSSGP RESET message size gbproxy: Move patching code out of the 04.08 specific functions gbproxy: Unify TLLI tracking gbproxy: Separate BSSGP parsing from patching gbproxy: Parse additional IMSI/PTMSI/TLLI fields gbproxy: Explicitly convert PTMSI to TLLI gbproxy: Make pointers to MI const in parse/check functions gbproxy: Track TLLI even when the IMSI is not known gbproxy: Test and fix IMSI/TMSI matching gbproxy: Refactor gbproxy_patch_bssgp_message gbproxy: Move parse_ctx logging into separate function gbproxy: Don't remove stale TLLI automatically gbproxy: Don't call time() in TLLI related functions gbproxy/test: More TLLI expiry testing gbproxy: Optimize gbprox_remove_stale_tllis gbproxy: Pass tlli_info around gbproxy: Fix warnings (signed/unsigned) gbproxy: Add gbprox_clear_patch_filter() (Coverity) gbproxy: Parse Detach Request messages gbproxy: Update enable_patching flag on existing tlli_info gbproxy: Handle old and new P-TMSI/TLLI gbproxy/test: Fix BSSGP/LLC test messages gbproxy/test: Generate BSSGP and LLC layer for DTAP messages gbproxy: Track SGSN and BSS TLLI/PTMSI separately gbproxy: Add 'patch-ptmsi' command to enable TLLI/P-TMSI patching gbproxy: Refactor gbprox_get_detached_tlli_info gbproxy: Refactor gbprox_patch_raid(), use different RAI types properly gbproxy: Also handle LLC non UI and LL11 messages gbproxy: Fix TLLI state handling gbproxy: Patch TLLI/P-TMSI gbproxy: Add context info to log messages gbproxy: Use different TLLI/P-TMSI for BSS and SGSN gbproxy/test: Add test for TLLI patching gbproxy: Refactor gb_proxy.c into several files gbproxy: Move peer definitions to gb_proxy_peer.c gbproxy: Fix issues found by Coverity gbproxy: Remove nonnull attributes gbproxy: Move PTP message handling into separate functions gbproxy/test: Test patching BSSGP SUSPEND/LLC-DISCARDED gbproxy: Create STATUS message with original PDU gbproxy/test: Add a test for IMSI acquisition gbproxy: Implement IMSI acquisition gbproxy: Fix warnings gbproxy: Add missing gbprox_process_bssgp_ul() return check gbproxy: Support a secondary SGSN gbproxy/test: Add test case for secondary SGSN gbproxy: Use secondary SGSN if IMSI matches gbproxy: Copy uplink messages to SGSN 2 gbproxy: Add missing commands to VTY write gbproxy/test: Check APN patching while P-TMSI patching is enabled gbproxy: Check tlli_info when patching, fix APN patching gbproxy: Make STATUS messages spec compliant gbproxy: Forward SGSN originated STATUS messages with BVCI gbproxy: Show number of stored messages in VTY show gbproxy: Reorganize VTY commands gbproxy/test: Extend P-TMSI patch test by a sequence of RA UDP REQ gbproxy: Change creation of tlli_info for SGSN originated messages gbproxy: Fix P-TMSI reassignment gbproxy/test: Add test cases for IMSI acquisition gbproxy: Reset IMSI acquisition and free stored messages in tlli_info gbproxy/test: Add assertions, improve test coverage gbproxy: Remove patch_mode, update initial checks gbproxy: Refactor gbprox_process_bssgp_ul into smaller functions gbproxy: Rework gbproxy_imsi_acquisition gbproxy: Replace 'mi_data' by 'imsi' gbproxy/test: Add/modify test cases gbproxy: Fixed RAI patching in Attach Request messages gbproxy: Send DETACH_ACC if the IMSI has not been acquired gbproxy: Remove gbproxy_register_tlli gbproxy/test: Add test case for tlli_info persistence gbproxy: Only patch what has been configured gbproxy: Keep tlli_info after detach gbproxy: Avoid multiple tlli_info entries with the same IMSI gbproxy: Replace LOGP by LOGPC for continued lines gbproxy: Delete and show detached entries via VTY gbproxy: Parse RA_UPD_REJ and invalidate TLLI gbproxy/test: Add test case for P-TMSI assigment gbproxy: Check other tlli_infos for matching TLLI/P-TMSI gbproxy/test: Fix Identification Response gbproxy/test: Add a test with a P-TMSI collision between two SGSNs gbproxy: Separate SGSN numeric namespaces sgsn: Reset local LLC parameters when sending XID reset sgsn: Free MM context after receiving a Detach Request gbproxy/test: Test IMSI acquisition for RA UDP REQ gbproxy: Restart IMSI acquisition on RA UDP REQ gbproxy/sgsn: Enforce termination when creating a P-TMSI/TLLI gbproxy: Rename identifiers related to IMSI matching gbproxy: Remove sgsn_nsei parameter gbproxy: Rename functions related to tlli_info gbproxy: Use the term 'link' instead of 'tlli' gbproxy: Rename the field 'enabled_tllis' to 'logical_links' gbproxy: Replace 'tlli' by 'link' in VTY commands gbproxy: Only search by valid identifiers gbproxy: Use monotonic system time instead of time-of-day gbproxy/test: Fix time calculation in test_gbproxy_tlli_expire() gbproxy/test: Fix IMSI length check (Coverity) gbproxy/test: Add invalidation tests to test_gbproxy_keep_info() gbproxy: Parse Attach Reject messages gbproxy: Reset IMSI acquisition within gbproxy_unregister_link_info gbproxy: Refactor local message generation gprs: Fix gprs_msgb_copy pointer computation gbproxy/test: Save and check received messages gbproxy/test: Add expect_msg checks to test_gbproxy_ra_patching gbproxy: Refactor IMSI matching gbproxy: Cleanup match config after tests gbproxy: Extend the match-imsi VTY command to support categories gbproxy: Use a separate regexp for routing gbproxy: Fix parser to accept GSM 24.008 Attach Req messages gbproxy: Replace ';;' by ';' gbproxy: Send STATUS(BVCI unknown) to BSS on unknown PTP BVCI gbproxy: Use pointer to PTMSI value instead of MI gbproxy: Refuse to configure conflicting NSEIs gbproxy: Add gprs_gb_message_name function gbproxy: Pass the log level as argument to gprs_gb_log_parse_context gbproxy: Log more information on parse errors gbproxy: Discard UL PTP messages with an unknown BVCI gbproxy/test: Don't assign a variable within OSMO_ASSERT (Coverity) gbproxy: Fix segfault for VTY delete-gbproxy-link sgsn: Cancel pending timer in sgsn_mm_ctx_free sgsn: Delete PDP contexts properly sgsn: Send detach(re-attach) instead of gmm status if TLLI unknown gbproxy/test: Add expect_msg checks to test_gbproxy_keep_info gbproxy/test: Add test case for repeated and otherwise bad messages gbproxy: Fix P-TMSI generation for repeated Attach Accept messages gbproxy: Patch BSSGP P-TMSI in PAGING PS messages sgsn: Avoid duplicated Attach Accept messages sgsn: Moved IMSI ACL management to sgsn_auth.c sgsn/test: Move MM context allocation into separate function sgsn/test: Add test case for Detach Request (MO, power-off = 1) sgsn: Only send Detach Accept (MO) if power_off isn't set sgsn: Handle Detach Requests even when there is no mmctx nitb/ctrl: Fix access to freed memory in verify_subscriber_modify sgsn: Remove unused static functions from gprs_gmm.c sgsn: Unassign the LLME after GMM Status without mmctx gbproxy: Fixed VTY doc for delete-gbproxy-link gbproxy/test: Extend test_gbproxy_keep_info bsc: Fix use-after-free on OML NM messages from the BTS gbproxy: Honour the BSS TLLI type when creating an SGSN TLLI sgsn/test: Move message sending to send_0408_message sgsn/test: Add test_gmm_attach bsc: Move gsm_network_init function to libbsc bsc: Move gsm_subscriber_base.c to libcommon sgsn: Reorganize and fix gsm48_gmm_authorize sgsn: Cleanup GMM state transitions sgsn: Call mm_ctx_cleanup_free to deregister MM context sgsn: Split gsm0408_gprs_force_reattach into 2 functions sgsn: Fix LLME leak when forcing a reattach sgsn: Move IMSI authorization to gsm48_gmm_authorize sgsn: Make authorization asynchronous sgsn/test: Add VTY tests for the SGSN sgsn: Add 'acl-only' authentication policy sgsn: Cleanup after RA Update Reject / Attach Reject sgsn: Don't send XID reset after Detach Accept sgsn: Don't assign a new P-TMSI if one is pending sgsn: Refactor sgsn_auth to separate request and authorization sgsn: Remove explicit sgsn_instance parameters sgsn: Cross-link gsm_subscriber and sgsn_mm_ctx gbproxy: Reset TLLIs when the link_info is found by IMSI/P-TMSI sgsn/test: Don't rely on the actual PRNG sequence sgsn/test: Add test case for unexpected Detach Accepts msc: Add net back pointer to gsm_trans msc: Don't use the subscriber to access the net object msc: Add and use gsm_subscriber_group bsc/test: Add tests for gsm_subscriber base sgsn: Fix and enable auth/ciph message generation sgsn: Change Auth&Ciph timer handling sgsn: Do authentication based on SRES values msc: Add net parameter to trans_alloc sgsn: Remove warnings msc: Add per subscriber keep_in_ram flag sgsn: Add gprs_subscriber.c sgsn: Integrate subscriber handling into the SGSN sgsn: Add gsm0408_gprs_access_cancelled sgsn: Add VTY commands to manage subscriber cache sgsn: Put SGSN related subscriber data into separate struct sgsn: Do not 'commit' implicitely when executing 'insert' sgsn: Integrate Auth & Ciph into gsm48_gmm_authorize sgsn: Support subscriber based authentication sgsn: Add missing LF in log message gprs: Move TLV parser functions to gprs_utils.c and rename them gprs: Add gprs_shift_tlv function openbsc: Ignore generated coverage analysis files sgsn: Log requested state change in sgsn_auth_update sgsn: Be more tolerant with state and SUSPEND/RESUME sgsn: Add support for authentication triplets sgsn: Add a subscriber based authentication phase sgsn: Fix VTY command error handling (Coverity) sgsn/doc: Add protocol specification for remote subscriber update sgsn/doc: Add IPA default parameters gprs: Add encoder/decoder for the Subscriber Update Protocol gprs: Add subscriber functions to create/handle GSUP messages sgsn/test: Add checks and reports to detect msgb leakage sgsn/test: Fix msgb freeing in mocked bssgp_tx_dl_ud gprs/test: Add tests for invalid GSUP messages gprs: Handle empty GSUP messages correctly gprs: Always reset auth tuples/pdp infos in gprs_gsup_decode gprs: Clear GSUP message structures before decoding gprs: Add GSUP client sgsn: Integrate the GSUP client into the SGSN sgsn: Replace subscr.authenticate by global require_authentication flag sgsn: Add global require_update_location flag sgsn/test: Add wrapper for gprs_subscr_rx_gsup_message sgsn/test: Add GMM test for a GSUP based attach procedure sgsn/test: Extend tests to simulate lost GSUP requests gprs: Add automatic re-connect if the GSUP connection is down gprs: Avoid sending stale GSUP requests after reconnect gprs: Handle return code of ipa_client_conn_open correctly gprs: Handle incoming IPA CCM message in gsup_client_read_cb gprs: Send PING and eventually reconnect sgsn: Show GSUP client info on 'show sgsn' gprs: Move protocol value_strings to gsm_04_08_gprs.c sgsn: Pass subscriber error causes to the GMM layer gprs: Use the cause value in GSUP error messages gprs: Let GSUP parser functions return GMM causes on errors gprs: Add LOGGSUBSCRP macro to log subscriber info gprs: Use LOGGSUBSCRP and LOGMMCTX for logging in gprs_susbcriber.c gprs: Pass GMM causes related to the MSC connection gprs/test: Move subscr cleanup code into a separate function sgsn/test: Fix subscriber cleanup sgsn/test: Refactor subscriber test gprs: Add expiry timeout for subscriber entries sgsn/test: Add test that intercepts gprs_gsup_client_send sgsn/test: Add checks and reports to detect subscr leakage sgsn/doc: Add message definitions for PURGE_MS responses gprs: Implement PURGE_MS GSUP messages gprs: Use PURGE MS messages gprs: Retry PURGE_MS procedure after timeout gprs: Block other GSUP procedures during PURGE_MS gprs: Add replies for all GSUP requests gprs: Don't create a subscr entry on InsertSubscriberData gprs: Support the full cancellation procedure sgsn: Fix P-TMSI generator's distance of equal values sgsn/test: Make assert_substr safer (Coverity) sgsn: Fix access to subscr in sgsn_auth_update (Coverity) sgsn: Add SGSN_ERROR_CAUSE_NONE and use it instead of 0 sgsn: Fix vty_out newlines sgsn: Restructure the 'update-subscriber' command debian: Fix dependencies gprs: Return 0 from gsup_client_connect if ok or retry timer enabled gprs: Add GPRS timer conversion functions gprs: Add 'Negotiated READY timer value' IE to Attach/RAU Accept gprs: Use a macro value to set the 'Periodic RA update timer' sgsn: Remove inactive LLME/MM after inactivity timeout gprs: Do not put the subscr in gprs_subscr_delete sgsn: Ensure 0-terminated imsi strings (Coverity) gprs: Don't check for EINPROGRESS in gprs_gsup_client_create gprs: Rename gprs_subscr_delete to gprs_subscr_cleanup sgsn: Don't reset mm->subscr manually in sgsn_mm_ctx_free gbproxy: Remove dummy definition of subscr_put sgsn: Don't allow mmctx == NULL in sgsn_update_subscriber_data sgsn: Add sgsn_mm_ctx_cleanup_free for safe shutdown gprs: Don't use subscr->keep_in_ram in normal operation gprs: Handle PURGE MS ERR/RES without subscr gprs: Support cancellation type gprs: Send GSUP error reply for requests without IMSI sgsn/test: Add tests for PurgeMs responses gprs/test: Fix GSUP Purge MS response messages gprs: Use 'Network failure' as default cause sgsn/test: Add checks for subscr->error_cause sgsn/test: Fix memory leak in test_subscriber_gsup sgsn: Add PDP info to subscriber data sgsn: Add functions to handle APN contexts sgsn: Add sgsn_ggsn_ctx_free function sgsn: Select GGSN based on APN Revert "gprs: Block other GSUP procedures during PURGE_MS" Katerina Barone-Adesi (1): Introduced support for external python tests Kevin Redon (1): db: Fetch the authorized key using ulonglong Max (1): Fix some packaging mistakes detected by lintian. Nikola (2): freebsd: dlopen/dlsym/dlerror is part of libc, use LIBRARY_DL for linking trau: Fix linking on FreeBSD by using LIBRAY_DL Nikola Kolev (2): bsc: Fix compilation on FreeBSD ipa: Fix the compilation of ipaccess-find on FreeBSD Pablo Neira Ayuso (32): nat: fix use after free in forward_sccp_to_bts libmgcp: add enum mgcp_type and use it libmgcp: add mgcp prefix to functions and constants libmgcp: attach mgcp_ prefix to udp_send libmgcp: add enum mgcp_role mgcp: add voice muxer support osmux: encapsulate for osmux state information in struct mgcp_endpoint osmux: split osmux_handle_lookup() in several functions osmux: move osmux socket initialization out of osmux_enable_endpoint() osmux: add osmux circuit ID management and resolve NAT problems osmux: cleanup osmux input handle on release osmux: remove redundant log message when bsc doesn't want to use Osmux osmux: remove spamming log message osmux: fix error path in osmux_handle_dummy() osmux: display statistics once osmux input handle is released osmux: allow to specify the Osmux port osmux: print out 'osmux port' when saving configuration osmux: use osmux port when specified from vty from engine osmux: remove spamming debug log messages osmux: rename osmux.c to mgcp_osmux.c osmux: fix access to uninitialized memory area in scheduled_tx_*_cb osmux: fix leak in osmux_deliver() osmux: fix unchecked return value in mgcp_parse_osmux_cid() tests: bsc-nat: fix bsc_mgcp_rewrite() with osmux osmux: set default port from mgcp_parse_config() osmux: add 'osmux batch-size NUM' option to mgcp vty osmux: initialize osmux_batch_size in mgcp config configure: fix unrecognized option --enable-external-tests osmux: save specific osmux configuration options if osmux is enabled osmux: osmux batch-factor can't be higher than 8 osmux: account extracted traffic from the osmux batch osmux: send osmux stats in MGCP DLCX responses Ruben Pollan (1): nitb: Add subscriber delete command Sipos Csaba (1): nokia: Allow to set the reset time for the nokia bts Tobias Engel (1): ussd: Reject and release unhandled SS requests/interrogation Álvaro Neira Ayuso (1): openbsc/gsm_data_shared.h: Added the attribute reduce_power in TRX ----------------------------------------------------------------------- hooks/post-receive -- The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)

10 years, 4 months

openbsc.git branch master updated. 0.13.0-933-g66105fd

by gitosis＠osmocom.org

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)". The branch, master has been updated via 66105fd3dc043e0f8011e1fa47864611936dd6aa (commit) from ca4151984c37fa24a97f15aaee43b6d105a43fb3 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/openbsc/commit/?id=66105fd3dc043e0f8011e1fa47864611… commit 66105fd3dc043e0f8011e1fa47864611936dd6aa Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Tue Feb 10 23:03:25 2015 +0100 ctrl: Implement a global result for rf_locked Create a one stop command to give a statement for the entire network. This can be used to check the policy and the state of the entire network. ----------------------------------------------------------------------- Summary of changes: openbsc/src/libbsc/bsc_ctrl_commands.c | 29 +++++++++++++++++++++++++++-- openbsc/tests/ctrl_test_runner.py | 10 ++++++++++ 2 files changed, 37 insertions(+), 2 deletions(-) hooks/post-receive -- The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)

10 years, 4 months

openbsc.git branch master updated. 0.13.0-932-gca41519

by gitosis＠osmocom.org

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)". The branch, master has been updated via ca4151984c37fa24a97f15aaee43b6d105a43fb3 (commit) via 349c40f47bc893d089cbbdec2614bf4d2f75d379 (commit) from a0735ecab558ea1759a8262eff62865bbed01051 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/openbsc/commit/?id=ca4151984c37fa24a97f15aaee43b6d1… commit ca4151984c37fa24a97f15aaee43b6d105a43fb3 Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Tue Feb 10 21:55:37 2015 +0100 ctrl: Add a command to check how many bts are configured This can be used to query how many bts are configured to check if all of them are locked or not. http://cgit.osmocom.org/openbsc/commit/?id=349c40f47bc893d089cbbdec2614bf4d… commit 349c40f47bc893d089cbbdec2614bf4d2f75d379 Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Tue Feb 10 21:37:16 2015 +0100 nitb: Move the rf-lock commands from osmo-bsc to libbsc The bts.0.rf-state and rf_locked command have been moved from the osmo-bsc binary to libbsc. All tests continue to pass. ----------------------------------------------------------------------- Summary of changes: openbsc/src/libbsc/bsc_ctrl_commands.c | 93 ++++++++++++++++++++++++++++++++++ openbsc/src/osmo-bsc/osmo_bsc_ctrl.c | 86 ------------------------------- openbsc/tests/ctrl_test_runner.py | 6 +++ 3 files changed, 99 insertions(+), 86 deletions(-) hooks/post-receive -- The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)

10 years, 4 months

osmo-gmr.git branch sylvain/live updated. v0.2-79-g8c34477

by gitosis＠osmocom.org

10 years, 5 months

osmo-gmr.git branch master updated. v0.2-78-g810984f

by gitosis＠osmocom.org

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Software for ETSI GMR (GEO Mobile Radio)". The branch, master has been updated via 810984f26f0c37dfdfa428963d803c9883e23540 (commit) from 43498b223e82cb14cdd3f8288d48c928b2974248 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- ----------------------------------------------------------------------- Summary of changes: utils/gmr_multi_rx/.gitignore | 2 - utils/gmr_multi_rx/Makefile | 35 --- utils/gmr_multi_rx/filter_helpers.hpp | 138 --------- utils/gmr_multi_rx/gmr_channels.hpp | 68 ----- utils/gmr_multi_rx/gmr_multi_rx.cpp | 540 ---------------------------------- 5 files changed, 783 deletions(-) delete mode 100644 utils/gmr_multi_rx/.gitignore delete mode 100644 utils/gmr_multi_rx/Makefile delete mode 100644 utils/gmr_multi_rx/filter_helpers.hpp delete mode 100644 utils/gmr_multi_rx/gmr_channels.hpp delete mode 100644 utils/gmr_multi_rx/gmr_multi_rx.cpp hooks/post-receive -- Software for ETSI GMR (GEO Mobile Radio)

10 years, 5 months

osmo-gmr.git branch sylvain/gr updated. v0.2-81-gea62a15

by gitosis＠osmocom.org

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Software for ETSI GMR (GEO Mobile Radio)". The branch, sylvain/gr has been updated discards 93b2ce91b037b3369edcd6e480c2271ff088418e (commit) discards 5ec66c633738d86043cc9c34347cf839710a6763 (commit) discards 6ea35456ea7b2b7e7e548a62568d679c8ed08ef0 (commit) discards ce3c94735cf8cfb832868e73bca6ccae178548be (commit) discards 4ad89fc9bb43e94dfae0da0af2907c746c8b209c (commit) discards a681c363103ea35890b0a16d2325697ea69c08fa (commit) discards 1dc9cff788933e135c139a501ee2477826128111 (commit) discards 6a109c35cc2ee7f209d9f126f9f07346016d2ae8 (commit) discards 2c42fab8aeea59cde5298e719e4e2a84767b07a3 (commit) via ea62a1580b9ce35ff5b31184e5347da341128f89 (commit) via 7f99c02b59283901faf83c2f29dfeb9be5eaf189 (commit) via 864bc0a6fb90ba90d2a2779bd2536b9e4ffefeee (commit) via 810984f26f0c37dfdfa428963d803c9883e23540 (commit) This update added new revisions after undoing existing revisions. That is to say, the old revision is not a strict subset of the new revision. This situation occurs when you --force push a change and generate a repository containing something like this: * -- * -- B -- O -- O -- O (93b2ce91b037b3369edcd6e480c2271ff088418e) \ N -- N -- N (ea62a1580b9ce35ff5b31184e5347da341128f89) When this happens we assume that you've already had alert emails for all of the O revisions, and so we here report only the revisions in the N branch from the common base, B. Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-gmr/commit/?id=ea62a1580b9ce35ff5b31184e5347da… commit ea62a1580b9ce35ff5b31184e5347da341128f89 Author: Sylvain Munaut <tnt(a)246tNt.com> Date: Fri Jan 30 10:11:02 2015 +0100 gr-gmr1: Make use of the new delimited burst feature Signed-off-by: Sylvain Munaut <tnt(a)246tNt.com> http://cgit.osmocom.org/osmo-gmr/commit/?id=7f99c02b59283901faf83c2f29dfeb9… commit 7f99c02b59283901faf83c2f29dfeb9be5eaf189 Author: Sylvain Munaut <tnt(a)246tNt.com> Date: Fri Jan 30 10:07:22 2015 +0100 gr-gmr1: Import new burst_to_tagged_stream logic Note that this cheats a little since I use the output buffer as temporary storage (i.e. writing samples to it and not telling GR until later ...) Signed-off-by: Sylvain Munaut <tnt(a)246tNt.com> http://cgit.osmocom.org/osmo-gmr/commit/?id=864bc0a6fb90ba90d2a2779bd2536b9… commit 864bc0a6fb90ba90d2a2779bd2536b9e4ffefeee Author: Sylvain Munaut <tnt(a)246tNt.com> Date: Sun Aug 31 22:10:41 2014 +0200 gr-gmr1: First code import with working RACH detection Signed-off-by: Sylvain Munaut <tnt(a)246tNt.com> http://cgit.osmocom.org/osmo-gmr/commit/?id=810984f26f0c37dfdfa428963d803c9… commit 810984f26f0c37dfdfa428963d803c9883e23540 Author: Sylvain Munaut <tnt(a)246tNt.com> Date: Sun Feb 8 15:09:13 2015 +0100 utils: Remove old unmaintained gmr_multi_rx This is 3.6 and from another time. Remove it all together for the time being. Signed-off-by: Sylvain Munaut <tnt(a)246tNt.com> ----------------------------------------------------------------------- Summary of changes: gr-gmr1/include/gnuradio/gmr1/CMakeLists.txt | 2 - gr-gmr1/include/gnuradio/gmr1/rach_detect.h | 50 --- gr-gmr1/include/gnuradio/gmr1/rach_detect_core.h | 51 --- gr-gmr1/lib/CMakeLists.txt | 2 - gr-gmr1/lib/rach_detect_core_impl.cc | 197 --------- gr-gmr1/lib/rach_detect_core_impl.h | 70 --- gr-gmr1/lib/rach_detect_impl.cc | 168 ------- gr-gmr1/lib/rach_detect_impl.h | 67 --- gr-gmr1/swig/gmr1_swig.i | 6 - utils/gmr_multi_rx/.gitignore | 2 - utils/gmr_multi_rx/Makefile | 35 -- utils/gmr_multi_rx/filter_helpers.hpp | 138 ------ utils/gmr_multi_rx/gmr_channels.hpp | 68 --- utils/gmr_multi_rx/gmr_multi_rx.cpp | 540 ----------------------- 14 files changed, 1396 deletions(-) delete mode 100644 gr-gmr1/include/gnuradio/gmr1/rach_detect.h delete mode 100644 gr-gmr1/include/gnuradio/gmr1/rach_detect_core.h delete mode 100644 gr-gmr1/lib/rach_detect_core_impl.cc delete mode 100644 gr-gmr1/lib/rach_detect_core_impl.h delete mode 100644 gr-gmr1/lib/rach_detect_impl.cc delete mode 100644 gr-gmr1/lib/rach_detect_impl.h delete mode 100644 utils/gmr_multi_rx/.gitignore delete mode 100644 utils/gmr_multi_rx/Makefile delete mode 100644 utils/gmr_multi_rx/filter_helpers.hpp delete mode 100644 utils/gmr_multi_rx/gmr_channels.hpp delete mode 100644 utils/gmr_multi_rx/gmr_multi_rx.cpp hooks/post-receive -- Software for ETSI GMR (GEO Mobile Radio)

10 years, 5 months

openbsc.git branch master updated. 0.13.0-930-ga0735ec

by gitosis＠osmocom.org

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)". The branch, master has been updated via a0735ecab558ea1759a8262eff62865bbed01051 (commit) from 60e073e28d5e52f8eb4feaa422abc71b8b9f831b (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/openbsc/commit/?id=a0735ecab558ea1759a8262eff62865b… commit a0735ecab558ea1759a8262eff62865bbed01051 Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Sun Feb 8 09:53:44 2015 +0100 smpp: Fix potential crash in handling submitSM In case: * No message_payload and a 0 sm_length was used * esm_class indicates UDH being present * 7bit encoding was requested The code would execute: ud_len = *sms_msg + 1; Which is a NULL pointer dereference and would lead to a crash of the NITB. Enforce the limits of the sm_length parameter and reject the messae otherwise. Fixes: Coverity CID 1042373 ----------------------------------------------------------------------- Summary of changes: openbsc/src/libmsc/smpp_openbsc.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) hooks/post-receive -- The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)

10 years, 5 months

openbsc.git branch master updated. 0.13.0-929-g60e073e

by gitosis＠osmocom.org

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)". The branch, master has been updated via 60e073e28d5e52f8eb4feaa422abc71b8b9f831b (commit) via 019851a5238e95dd1a089d19d966973b5a61f568 (commit) from 56e1766dba1a03e304e51d079e65406542e7887c (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/openbsc/commit/?id=60e073e28d5e52f8eb4feaa422abc71b… commit 60e073e28d5e52f8eb4feaa422abc71b8b9f831b Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Sun Feb 8 09:25:38 2015 +0100 nat: getopt returns "static" data no need to copy it I used strdup in case the data would not be valid from after the call to getopt and this creates a potential leak if a user is specifying multiple configuration files. If I depend on the fact that the string is a pointer into the argv[] array I can kill the strdup and fix the unlikely leak. Fixes: Coverity CID 1206578 http://cgit.osmocom.org/openbsc/commit/?id=019851a5238e95dd1a089d19d966973b… commit 019851a5238e95dd1a089d19d966973b5a61f568 Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Sun Feb 8 09:21:04 2015 +0100 smpp: Do not check conn for being null We are deferencing conn earlier in this function without doing a null check. At the time deliver_to_esme is called the conn will always exist and even the lchan is likely to be present. Remove the null check for conn right now. Fixes: Coverity CID 1210594 ----------------------------------------------------------------------- Summary of changes: openbsc/src/libmsc/smpp_openbsc.c | 2 +- openbsc/src/osmo-bsc_nat/bsc_nat.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) hooks/post-receive -- The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)

10 years, 5 months

openbsc.git branch master updated. 0.13.0-927-g56e1766

by gitosis＠osmocom.org

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)". The branch, master has been updated via 56e1766dba1a03e304e51d079e65406542e7887c (commit) from 9c20a5f45c49562ab7e3e53b5abb94e2afdfb23f (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/openbsc/commit/?id=56e1766dba1a03e304e51d079e654065… commit 56e1766dba1a03e304e51d079e65406542e7887c Author: Sipos Csaba <sipos.csaba(a)kvk.uni-obuda.hu> Date: Sat Feb 7 13:27:36 2015 +0100 nokia: Allow to set the reset time for the nokia bts ----------------------------------------------------------------------- Summary of changes: openbsc/include/openbsc/gsm_data_shared.h | 1 + openbsc/src/libbsc/bsc_vty.c | 21 +++++++++++++++++++++ openbsc/src/libbsc/bts_nokia_site.c | 6 ++---- openbsc/src/libcommon/gsm_data.c | 2 ++ 4 files changed, 26 insertions(+), 4 deletions(-) hooks/post-receive -- The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)

10 years, 5 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

osmocom-commitlog