- osmocom-commitlog - lists.osmocom.org

libosmocore.git branch master updated. 0.8.0-34-g9385d1e
by gitosis＠osmocom.org 06 May '15

06 May '15

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "An utility library for Open Source Mobile Communications". The branch, master has been updated via 9385d1e01bd05c7099e3e441248ce0b10a6d02e2 (commit) from 455d34f4767df3bcd0eccdd4ac42a755c016e0ed (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/libosmocore/commit/?id=9385d1e01bd05c7099e3e441248c… commit 9385d1e01bd05c7099e3e441248ce0b10a6d02e2 Author: Jacob Erlbeck <jerlbeck(a)sysmocom.de> Date: Wed May 6 09:29:32 2015 +0200 bssgp: Fix bssgp_tx_fc_bvc parameter type Currently large values for Bmax default MS get sliced since a uint16_t is used as the type of the corresponding parameter of bssgp_tx_fc_bvc. GSM 48.018, 11.3.2 which in turn refers to 11.3.5 specifies a maximum of 6MB (0xffff * 100). This commit changes the type to uint32_t to cover the full value range. Sponsored-by: On-Waves ehf ----------------------------------------------------------------------- Summary of changes: TODO-RELEASE | 1 + include/osmocom/gprs/gprs_bssgp_bss.h | 2 +- src/gb/gprs_bssgp_bss.c | 2 +- tests/gb/gprs_bssgp_test.c | 75 +++++++++++++++++++++++++++++++++++ tests/gb/gprs_bssgp_test.ok | 4 ++ 5 files changed, 82 insertions(+), 2 deletions(-) hooks/post-receive -- An utility library for Open Source Mobile Communications

1 0

openbsc.git branch zecke/features/cdr created. 0.14.0-74-gc15c61c
by gitosis＠osmocom.org 06 May '15

06 May '15

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)". The branch, zecke/features/cdr has been created at c15c61c401e6f934fbf35c0c87d0777ff857f7c6 (commit) - Log ----------------------------------------------------------------- http://cgit.osmocom.org/openbsc/commit/?id=c15c61c401e6f934fbf35c0c87d0777f… commit c15c61c401e6f934fbf35c0c87d0777ff857f7c6 Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Wed May 6 17:46:08 2015 +0200 sgsn: Add VTY configuration for the CDR module Make it possible to set a filename to use for the CDR. By default no CDR will be generated. Forbid to set the interval of 0 seconds as this will cause a lot of work. Add a very basic VTY test. http://cgit.osmocom.org/openbsc/commit/?id=4f5b8237ec2182861fbe075f4cce56a9… commit 4f5b8237ec2182861fbe075f4cce56a9c7caf904 Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Tue May 5 22:25:48 2015 +0200 sgsn: Create an initial and limited CDR module This is consuming the new signals and allows to install several different CDR/observing/event/audit modules in the future. For getting the bytes in/out the code would have had to undo what the rate counter is doing and at the same time adding a "total" to the ratecounter didn't look like a good idea, the same went for making it a plain counter. Begin writing the values one by one and open/closing a new FILE for every log messages. This is not efficient but easily deals with external truncation/rotation of the file (no fstat for and checking the links and size). As usual we will wait and see if this is an issue. Add some new members to our PDP context structure to see what it is about. http://cgit.osmocom.org/openbsc/commit/?id=b100895557af0980d5910a3dc8190317… commit b100895557af0980d5910a3dc81903179dea615e Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Sat May 2 19:55:38 2015 +0200 sgsn: Add various signals consumed by CDR or other client code http://cgit.osmocom.org/openbsc/commit/?id=20de3ae17cbb61f831ca8f06a4cf7436… commit 20de3ae17cbb61f831ca8f06a4cf7436441cfdc6 Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Tue May 5 22:52:40 2015 +0200 sgsn: Extract the MSISDN from the subscr data structure In case there is a subscr attached to the MM context and there is an encoded MSISDN we will attempt to decode it and in case of an international number prepend a '+'. Assume that the array size of gsm_mmcc_called->number is as big as ctx->msisdn for the strncpy. http://cgit.osmocom.org/openbsc/commit/?id=b448dd849a96fd1b736ee183385d7a6a… commit b448dd849a96fd1b736ee183385d7a6a9ea1863e Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Sun May 3 11:46:58 2015 +0200 sgsn: Make the free function internal All calls should and do go through the sgsn_mm_ctx_cleanup_free function. ----------------------------------------------------------------------- hooks/post-receive -- The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)

1 0

osmo-pcu.git branch jerlbeck/flow-control updated. 0.2-415-g6eeb7c7
by gitosis＠osmocom.org 06 May '15

06 May '15

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "UNNAMED PROJECT". The branch, jerlbeck/flow-control has been updated discards b218b819202556ed86cd1c428aee16fa778914ac (commit) discards 68f7d29a5a4d7688a0e5737e7e6d94d72154e773 (commit) discards 0f3882d233837bd74add250fc81aeeb5c9e71839 (commit) via 6eeb7c7e74ed8cc1e23b19453012f43563055e12 (commit) via 6e4ccec6c4b69681e94e4d3b27ef022e4aab81a9 (commit) via 0288cdb0a8d4011905da55a5b74319e38e27e70d (commit) via 3d62fc55d89fe1f2da0f0ca1950ab97da7e07418 (commit) via 87d7341fbe290582ac4a03f67349496e5306eb04 (commit) via 29d91e92715945f53aff4530602add765d63946e (commit) This update added new revisions after undoing existing revisions. That is to say, the old revision is not a strict subset of the new revision. This situation occurs when you --force push a change and generate a repository containing something like this: * -- * -- B -- O -- O -- O (b218b819202556ed86cd1c428aee16fa778914ac) \ N -- N -- N (6eeb7c7e74ed8cc1e23b19453012f43563055e12) When this happens we assume that you've already had alert emails for all of the O revisions, and so we here report only the revisions in the N branch from the common base, B. Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-pcu/commit/?id=6eeb7c7e74ed8cc1e23b19453012f43… commit 6eeb7c7e74ed8cc1e23b19453012f43563055e12 Author: Jacob Erlbeck <jerlbeck(a)sysmocom.de> Date: Wed May 6 15:26:08 2015 +0200 bssgp: Increment BSSGP flow control tag value Currently the tag value in FLOW CONTROL BVC messages is always 1. This commit changes the implementation to increment that value with each of the FLOW CONTROL BVC messages that is sent to the SGSN. Sponsored-by: On-Waves ehf http://cgit.osmocom.org/osmo-pcu/commit/?id=6e4ccec6c4b69681e94e4d3b27ef022… commit 6e4ccec6c4b69681e94e4d3b27ef022e4aab81a9 Author: Jacob Erlbeck <jerlbeck(a)sysmocom.de> Date: Wed May 6 14:24:36 2015 +0200 bssgp: Compute and transmit queue delay The specification 28.018, allows to transmit the average LLC downlink queueing delay in FLOW CONTROL BVC messages (BVC Measurement IE, see GSM 28.018, 10.4.4 and 11.3.7). This commit extends gprs_bssgp_pcu.cpp to compute the average delay time between two subsequent FLOW CONTROL BVC messages. The average is implemented as an arithmetic average without any weighting. Ticket: OW#1432 Sponsored-by: On-Waves ehf http://cgit.osmocom.org/osmo-pcu/commit/?id=0288cdb0a8d4011905da55a5b74319e… commit 0288cdb0a8d4011905da55a5b74319e38e27e70d Author: Jacob Erlbeck <jerlbeck(a)sysmocom.de> Date: Wed May 6 10:47:30 2015 +0200 bssgp: Add VTY command to Limit the bucket size by time Currently the bucket size is by default being computed based on the leak rate and the expected life time of LLC frames. The latter is either taken from 'queue lifetime' (if given) or a fixed value is used. Using 'queue lifetime' has the drawback that it sets a 'hard' limit, since frames will be dropped if they stay in the queue for a longer time. This commit adds a VTY command to specifically set the time used for the computation of the bucket size advertised to the SGSN. It does not affect the PCUs queue handling in any way. If the bucket time is not set (or if the 'no' command has been used), the old behaviour (see above) is applied. The following VTY commands are added (config-pcu node): - flow-control bucket-time <1-65534> Sets the time in centisecs - no flow-control bucket-time Don't use this time Ticket: OW#1432 Sponsored-by: On-Waves ehf http://cgit.osmocom.org/osmo-pcu/commit/?id=3d62fc55d89fe1f2da0f0ca1950ab97… commit 3d62fc55d89fe1f2da0f0ca1950ab97da7e07418 Author: Jacob Erlbeck <jerlbeck(a)sysmocom.de> Date: Thu Apr 30 15:01:15 2015 +0200 bssgp: Compute BVC bucket size and leak rate Currently the PDCH assignment and coding scheme does not influence the values transmitted by the FLOW-CONTROL-BVC messages. This commit adds the computation of those values. If the leak rate is not given explicitly, it is derived from the number of PDCH and the allowed coding scheme. If the BVC bucket size is not given explicitly, it is derived from the leak rate and the maximum buffer time. The latter is taken from the 'queue lifetime' command (or 10s if this has not been used). The MS default bucket size is set to 50% of the BVC bucket size. The MS default rate computation assumes, that each MS only supports up to 4 time slots for GPRS RX. Sponsored-by: On-Waves ehf http://cgit.osmocom.org/osmo-pcu/commit/?id=87d7341fbe290582ac4a03f67349496… commit 87d7341fbe290582ac4a03f67349496e5306eb04 Author: Jacob Erlbeck <jerlbeck(a)sysmocom.de> Date: Tue Apr 21 12:56:48 2015 +0200 bssgp: Make BVC bucket size / leak rate configurable Currently the FLOW-CONTROL_BVC message contains fixed values: The tag is 1, the BVC bucket size is 6MB, the BVC bucket leak rate is 820kbit/s, the MS bucket size is 50kB, and the MS leak rate is 50kbit/s. This commit makes the BVC parameters configurable and adds the following VTY commands: - flow-control force-bvc-bucket-size <1-6553500> - no flow-control force-bvc-bucket-size - flow-control force-bvc-leak-rate <1-6553500> - no flow-control force-bvc-leak-rate - flow-control force-ms-bucket-size <1-6553500> - no flow-control force-ms-bucket-size - flow-control force-ms-leak-rate <1-6553500> - no flow-control force-ms-leak-rate The 'no' variants restore the default behaviour. Sponsored-by: On-Waves ehf http://cgit.osmocom.org/osmo-pcu/commit/?id=29d91e92715945f53aff4530602add7… commit 29d91e92715945f53aff4530602add765d63946e Author: Jacob Erlbeck <jerlbeck(a)sysmocom.de> Date: Wed Apr 29 14:46:52 2015 +0200 tbf: Added calls to llc_dropped_frame Currently this function which increments the corresponding counter is just called in gprs_llc::clear(). It is not called on places where LLC DISCARDED messages are sent. This commit adds calls to llc_dropped_frame() at these places. Sponsored-by: On-Waves ehf ----------------------------------------------------------------------- Summary of changes: src/bts.h | 1 + src/gprs_bssgp_pcu.cpp | 162 +++++++++++++++++++++++++++++++++++++------------ src/gprs_bssgp_pcu.h | 8 +++ src/pcu_vty.c | 28 +++++++++ src/tbf_dl.cpp | 16 +++-- 5 files changed, 171 insertions(+), 44 deletions(-) hooks/post-receive -- UNNAMED PROJECT

1 0

openbsc.git branch master updated. 0.14.0-69-g4c8e8f9
by gitosis＠osmocom.org 05 May '15

05 May '15

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)". The branch, master has been updated via 4c8e8f990a24fc5ecb24c5c21c944d8ab4dc7c1e (commit) via d05e06989def81f886c673956da476e626a27af5 (commit) via f7b3826f03772d57d1d1a1153c5684f7d4799b60 (commit) via 4bd931f96d75d3e71b73a06e67f84ffdcab9caf6 (commit) via 8cedded88c9a0c4c486f987b818ccba57e96421e (commit) via 9ba273d365ac731a9c3ff285821062c346724390 (commit) via 49c1a7156c7e0ced1709aee4a3d3438db60bae41 (commit) via b927f1c3199b48becb03c0d56926c3b98d6ff5ce (commit) via 02d8c472bdff0a085cbedd9d902f7ced29e5d712 (commit) via e448554568fb4244a1b95e2e8666714f9498d69a (commit) from 337343d159888886eaa68476b70dbe19db93845b (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/openbsc/commit/?id=4c8e8f990a24fc5ecb24c5c21c944d8a… commit 4c8e8f990a24fc5ecb24c5c21c944d8ab4dc7c1e Merge: 337343d d05e069 Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Tue May 5 21:16:19 2015 +0200 Merge branch 'zecke/features/gprs-gsup-fixes' When communicating with a GGSN that is not the OpenGGSN the PDP context activation does fail. This is because on the activation of the first PDP context we need to supply a MSISDN. Extend the protocol, parse the MSISDN and then send it to the GGSN. The second item is that we have only forwarded the requested QoS of the subscriber. In most cases this is 0x0, 0x0, ... which means one requests a rate 0 byte/sec which the GGSN will not allow. Make it possible to receive, store and use the subscribed QoS of the Subscriber. http://cgit.osmocom.org/openbsc/commit/?id=d05e06989def81f886c673956da476e6… commit d05e06989def81f886c673956da476e626a27af5 Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Thu Apr 23 16:59:04 2015 -0400 sgsn: Show the QoS that has been assigned http://cgit.osmocom.org/openbsc/commit/?id=f7b3826f03772d57d1d1a1153c5684f7… commit f7b3826f03772d57d1d1a1153c5684f7d4799b60 Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Thu Apr 23 16:58:33 2015 -0400 sgsn: Dump the E164 (encoded) assigned to the subscriber http://cgit.osmocom.org/openbsc/commit/?id=4bd931f96d75d3e71b73a06e67f84ffd… commit 4bd931f96d75d3e71b73a06e67f84ffdcab9caf6 Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Thu Apr 23 11:50:41 2015 -0400 sgsn: Handle different levels of QoS If QoS is only three bytes it does not include the allocation/ retention policy. Otherwise it does. Copy it depending on that. We should have a macro for the clamping to reduce code duplication. The insanity does come from the MAP data and this seems to be the easiest in terms of complexity. It is an array of bytes that is transported from MAPProxy to the SGSN and then simply forwarded. The case of more than three bytes is neither unit nor manually tested so far. http://cgit.osmocom.org/openbsc/commit/?id=8cedded88c9a0c4c486f987b818ccba5… commit 8cedded88c9a0c4c486f987b818ccba57e96421e Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Thu Apr 23 11:33:35 2015 -0400 sgsn: Store subscribed QoS and attempt to use it sgsn_create_pdp_ctx should use the subscribed QoS. When selecting the PDP context we inject the QoS to be used into the TLV structure and use it during the request. Assume a "qos-Subscribed" structure only with three bytes and prepend the Allocation/Retention policy to the request. http://cgit.osmocom.org/openbsc/commit/?id=9ba273d365ac731a9c3ff285821062c3… commit 9ba273d365ac731a9c3ff285821062c346724390 Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Thu Apr 23 09:53:53 2015 -0400 sgsn: Copy the msisdn to the sgsn_data and use it in PDP activation The MSISDN should be present for "security" reasons in the first activation of a PDP context. Take the encoded MSISDN, store it for future use and then put it into the PDP activation request. The MM Context contains a field for a decoded MSISDN already. As we need to forward the data to the GGSN I want to avoid having to store TON and NPI in another place. Simply store the data in the encoded form. http://cgit.osmocom.org/openbsc/commit/?id=49c1a7156c7e0ced1709aee4a3d3438d… commit 49c1a7156c7e0ced1709aee4a3d3438db60bae41 Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Thu Apr 23 09:13:01 2015 -0400 gsup: Extract the QoS field Add roundtrip test for the new QoS IE. It will be consumed in later commits. http://cgit.osmocom.org/openbsc/commit/?id=b927f1c3199b48becb03c0d56926c3b9… commit b927f1c3199b48becb03c0d56926c3b98d6ff5ce Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Wed Apr 22 23:09:41 2015 -0400 gsup: Extract the new MSISDN string Extract the new MSISDN IE from the GSUP message and verify that it is read/written to the message. http://cgit.osmocom.org/openbsc/commit/?id=02d8c472bdff0a085cbedd9d902f7ced… commit 02d8c472bdff0a085cbedd9d902f7ced29e5d712 Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Wed Apr 22 22:42:23 2015 -0400 gsup: Specify the QoS service for the PDP info QoS is a mess. In MAP there is qos-Subscribed which is then extended using ext-QoS-Subscribed, ext2-QoS-Subscribed, ext3-QoS-Subscribed and maybe even ext4-QoS-Subscribed by now. The MAP ASN1 files defined how these need to be "linearized". Instead of copying this I have decided to include the two semantics with/without the Allocation/Retention policy using the size of the data. http://cgit.osmocom.org/openbsc/commit/?id=e448554568fb4244a1b95e2e8666714f… commit e448554568fb4244a1b95e2e8666714f9498d69a Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Wed Apr 22 22:10:44 2015 -0400 gsup: Document passing MSISDN as part of the response When asking the GGSN to create/open a PDP context one needs to send a MSISDN. The MSISDN can only be provided through the GSUP interface. ----------------------------------------------------------------------- Summary of changes: openbsc/doc/sgsn-remote-protocol.txt | 45 ++++++++++++++++++++++++++++ openbsc/include/openbsc/gprs_gsup_messages.h | 7 +++++ openbsc/include/openbsc/gprs_sgsn.h | 5 ++++ openbsc/include/openbsc/gsm_04_08_gprs.h | 1 + openbsc/src/gprs/gprs_gsup_messages.c | 21 +++++++++++++ openbsc/src/gprs/gprs_sgsn.c | 15 ++++++++++ openbsc/src/gprs/gprs_subscriber.c | 23 ++++++++++++++ openbsc/src/gprs/sgsn_libgtp.c | 41 ++++++++++++++++++++----- openbsc/src/gprs/sgsn_vty.c | 8 ++++- openbsc/tests/gprs/gprs_test.c | 5 +++- openbsc/tests/sgsn/sgsn_test.c | 9 ++++++ 11 files changed, 170 insertions(+), 10 deletions(-) hooks/post-receive -- The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)

1 0

osmo-pcu.git branch jerlbeck/flow-control updated. 0.2-412-gb218b81
by gitosis＠osmocom.org 05 May '15

05 May '15

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "UNNAMED PROJECT". The branch, jerlbeck/flow-control has been updated discards 5e1a8403564b2af351ad8a8d462488cc25648dd8 (commit) discards fe865b1887d58302e7a68b6b01b5de69f35b0870 (commit) discards 47e945161b06edf51f19ec4d7b7baec1f09ce8b8 (commit) discards bcfa2f67b4b19174964d64992f34fae12adbcc84 (commit) discards fcb8e6560c5e12f55518479c6fd22344d233e9cb (commit) via b218b819202556ed86cd1c428aee16fa778914ac (commit) via 68f7d29a5a4d7688a0e5737e7e6d94d72154e773 (commit) via 0f3882d233837bd74add250fc81aeeb5c9e71839 (commit) via 801d6fe40cd5bd11257074c7aaf113a57919fb2d (commit) via 0494c75a53f05a5ec4c4b3830672ef2451396f27 (commit) via 0d39dc92b5cfe6e8be9b2a68eaf50c94cae97355 (commit) via 1f33294b1c1394c6ff0dd109ff10bb65886c1a44 (commit) via 2acfbebfd3b7fc24ccaf2115e7c8d55e94cd1450 (commit) via c0c580c414e4fe0bd82ebc78ff12bb1014cd5a9c (commit) This update added new revisions after undoing existing revisions. That is to say, the old revision is not a strict subset of the new revision. This situation occurs when you --force push a change and generate a repository containing something like this: * -- * -- B -- O -- O -- O (5e1a8403564b2af351ad8a8d462488cc25648dd8) \ N -- N -- N (b218b819202556ed86cd1c428aee16fa778914ac) When this happens we assume that you've already had alert emails for all of the O revisions, and so we here report only the revisions in the N branch from the common base, B. Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-pcu/commit/?id=b218b819202556ed86cd1c428aee16f… commit b218b819202556ed86cd1c428aee16fa778914ac Author: Jacob Erlbeck <jerlbeck(a)sysmocom.de> Date: Thu Apr 30 15:01:15 2015 +0200 bssgp: Compute BVC bucket size and leak rate Currently the PDCH assignment and coding scheme does not influence the values transmitted by the FLOW-CONTROL-BVC messages. This commit adds the computation of those values. If the leak rate is not given explicitly, it is derived from the number of PDCH and the allowed coding scheme. If the BVC bucket size is not given explicitly, it is derived from the leak rate and the maximum buffer time. The latter is taken from the 'queue lifetime' command (or 10s if this has not been used). The MS default bucket size is set to 25% of the BVC bucket size. http://cgit.osmocom.org/osmo-pcu/commit/?id=68f7d29a5a4d7688a0e5737e7e6d94d… commit 68f7d29a5a4d7688a0e5737e7e6d94d72154e773 Author: Jacob Erlbeck <jerlbeck(a)sysmocom.de> Date: Tue Apr 21 12:56:48 2015 +0200 bssgp: Make BVC bucket size / leak rate configurable Currently the FLOW-CONTROL_BVC message contains fixed values: The tag is 1, the BVC bucket size is 6MB, the BVC bucket leak rate is 820kbit/s, the MS bucket size is 50kB, and the MS leak rate is 50kbit/s. This commit makes the BVC parameters configurable and adds the following VTY commands: - flow-control force-bvc-bucket-size <1-6553500> - no flow-control force-bvc-bucket-size - flow-control force-bvc-leak-rate <1-6553500> - no flow-control force-bvc-leak-rate - flow-control force-ms-bucket-size <1-6553500> - no flow-control force-ms-bucket-size - flow-control force-ms-leak-rate <1-6553500> - no flow-control force-ms-leak-rate The 'no' variants restore the default behaviour. Sponsored-by: On-Waves ehf http://cgit.osmocom.org/osmo-pcu/commit/?id=0f3882d233837bd74add250fc81aeeb… commit 0f3882d233837bd74add250fc81aeeb5c9e71839 Author: Jacob Erlbeck <jerlbeck(a)sysmocom.de> Date: Wed Apr 29 14:46:52 2015 +0200 tbf: Added calls to llc_dropped_frame Currently this function which increments the corresponding counter is just called in gprs_llc::clear(). It is not called on places where LLC DISCARDED messages are sent. This commit adds calls to llc_dropped_frame() at these places. Sponsored-by: On-Waves ehf ----------------------------------------------------------------------- Summary of changes: src/bts.cpp | 2 +- src/sysmo_l1_if.h | 10 ++++++++++ tests/alloc/AllocTest.cpp | 16 +++++++--------- tests/emu/pcu_emu.cpp | 6 +++--- tests/emu/test_pdp_activation.cpp | 4 +--- tests/emu/test_replay_gprs_attach.cpp | 2 +- tests/tbf/TbfTest.cpp | 2 +- tests/types/TypesTest.cpp | 2 -- 8 files changed, 24 insertions(+), 20 deletions(-) hooks/post-receive -- UNNAMED PROJECT

1 0

osmo-pcu.git branch master updated. 0.2-409-g801d6fe
by gitosis＠osmocom.org 05 May '15

05 May '15

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "UNNAMED PROJECT". The branch, master has been updated via 801d6fe40cd5bd11257074c7aaf113a57919fb2d (commit) via 0494c75a53f05a5ec4c4b3830672ef2451396f27 (commit) via 0d39dc92b5cfe6e8be9b2a68eaf50c94cae97355 (commit) via 1f33294b1c1394c6ff0dd109ff10bb65886c1a44 (commit) via 2acfbebfd3b7fc24ccaf2115e7c8d55e94cd1450 (commit) via c0c580c414e4fe0bd82ebc78ff12bb1014cd5a9c (commit) via 56e8d710907b9320d41a6285f08bba39aae2ee3b (commit) from 00fc6b13f266dab31e7a00d62b0988970fa20697 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- ----------------------------------------------------------------------- Summary of changes: src/bts.cpp | 2 +- src/pcu_vty.c | 8 +++++--- src/sysmo_l1_if.h | 10 ++++++++++ src/tbf.cpp | 2 +- src/tbf.h | 3 +-- src/tbf_dl.cpp | 1 - tests/alloc/AllocTest.cpp | 16 +++++++--------- tests/emu/pcu_emu.cpp | 6 +++--- tests/emu/test_pdp_activation.cpp | 4 +--- tests/emu/test_replay_gprs_attach.cpp | 2 +- tests/tbf/TbfTest.cpp | 2 +- tests/types/TypesTest.cpp | 2 -- 12 files changed, 31 insertions(+), 27 deletions(-) hooks/post-receive -- UNNAMED PROJECT

1 0

libosmocore.git branch master updated. 0.8.0-33-g455d34f
by gitosis＠osmocom.org 05 May '15

05 May '15

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "An utility library for Open Source Mobile Communications". The branch, master has been updated via 455d34f4767df3bcd0eccdd4ac42a755c016e0ed (commit) from 780bba625d2d09478527ec6038f0f6e15eb6e651 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/libosmocore/commit/?id=455d34f4767df3bcd0eccdd4ac42… commit 455d34f4767df3bcd0eccdd4ac42a755c016e0ed Author: Jacob Erlbeck <jerlbeck(a)sysmocom.de> Date: Mon May 4 07:44:43 2015 +0200 bssgp/test: Fix bssgp-fc test The fix in the commit "bssgp: Fix call to llist_entry in fc_queue_timer_cfg" prevents the flow control code from generating certain logging messages ("-BSSGP-FC: fc_timer_cb() but still not able to send PDU of 10 bytes") during the tests. This breaks the test suite, since the update of the correseponding stderr output file misses. This commit updates the bssgp_fc_tests.err file accordingly. Sponsored-by: On-Waves ehf ----------------------------------------------------------------------- Summary of changes: tests/gb/bssgp_fc_tests.err | 30 ------------------------------ 1 file changed, 30 deletions(-) hooks/post-receive -- An utility library for Open Source Mobile Communications

1 0

openbsc.git branch jerlbeck/wip/gprs-gsup-fixes updated. 0.14.0-68-g8c9b1b7
by gitosis＠osmocom.org 04 May '15

04 May '15

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)". The branch, jerlbeck/wip/gprs-gsup-fixes has been updated discards 2ef910cff276d7d488b255dcf341143be645eefe (commit) discards 32dfa6d340a618149cbc61d0de8c7202863829b8 (commit) discards a27f7bb653e4beb7129765889f69d8761f2f89f4 (commit) discards 2bf403500209931688ded12ae397899b662d7f91 (commit) via 8c9b1b7dd39c89ce12344666fba5f7dda84abe6c (commit) via 075a1e3570553405cc29e62d4a9ff5033a21901c (commit) via 36abcd0e287fbd17172551eb705934c9e8ca666a (commit) via 313ff813b7eed8afe0aa9fa385bab0c1c1a367df (commit) via 9433770e84ac8a11328cf9ca6f8974ef55cd3df2 (commit) via 0b7c66d7d02761e87799a12c3be99fcba222c077 (commit) via 3d9f6cc536e805d51001d9ae68abfa75433c6c33 (commit) via c510ac0c09d2875cd4efa254c25e6cf7cc5891f3 (commit) via 7400ac3a3e93a914932ac43d48a0ace035abcf9b (commit) via 337343d159888886eaa68476b70dbe19db93845b (commit) via d26b8fcbe22eb4a56c87f0114a0e826551243511 (commit) via ec0cb7c64d5d42e8d0d599b209a3eabacfceba60 (commit) via d6332809d8313903c65ccd28646f41b7c1aa6b99 (commit) via c652913674ecc30f8d234878a17baa623cbacf99 (commit) via 06a88fa0ae1f86cef0a23a1462bfef950418ea36 (commit) via 4e8176d0c9c9a98f32cb4541b4f986de0011d4b9 (commit) via c09f8a3b7fb94ccef41e33c32bfe2bff1ffe0e44 (commit) via 81dbfe412c8196df443f38bf4fbea4f9897607ef (commit) via 71857d72426c75e4bb71c3843a9eeeff53eca37d (commit) via a0478814bc1c56a9e5648ffecd7c11671804e6ff (commit) via 4ba947bf4b80b553a3411ec1fd29c45430bd6c40 (commit) via c36a6d5705830a6fd6e41e684dc031db35165e04 (commit) via 14b2cd9f321974e211f3291a6ccc2d1aaaf948d1 (commit) via a1e6bd6768e61828823da3ba774e55b6f89559fc (commit) via d7e04b9956bb7d579697604fff6ba67fc6b9e52d (commit) via d04d009f473d89a426c16dd24e5a4c692caf0017 (commit) via 4579bb1ed7464d66343d84846314ec66e6f8cccd (commit) via 973dbaeebdbdbd8fed417cdfd169644093389d05 (commit) via 4247cead2b77b2ad8ae2a6c1b48a450309185bb3 (commit) via 38159428d2b1e95a2c6fa91775f7b3678aef2f1f (commit) This update added new revisions after undoing existing revisions. That is to say, the old revision is not a strict subset of the new revision. This situation occurs when you --force push a change and generate a repository containing something like this: * -- * -- B -- O -- O -- O (2ef910cff276d7d488b255dcf341143be645eefe) \ N -- N -- N (8c9b1b7dd39c89ce12344666fba5f7dda84abe6c) When this happens we assume that you've already had alert emails for all of the O revisions, and so we here report only the revisions in the N branch from the common base, B. Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/openbsc/commit/?id=8c9b1b7dd39c89ce12344666fba5f7dd… commit 8c9b1b7dd39c89ce12344666fba5f7dda84abe6c Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Thu Apr 23 16:59:04 2015 -0400 sgsn: Show the QoS that has been assigned http://cgit.osmocom.org/openbsc/commit/?id=075a1e3570553405cc29e62d4a9ff503… commit 075a1e3570553405cc29e62d4a9ff5033a21901c Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Thu Apr 23 16:58:33 2015 -0400 sgsn: Dump the E164 (encoded) assigned to the subscriber http://cgit.osmocom.org/openbsc/commit/?id=36abcd0e287fbd17172551eb705934c9… commit 36abcd0e287fbd17172551eb705934c9e8ca666a Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Thu Apr 23 11:50:41 2015 -0400 sgsn: Handle different levels of QoS If QoS is only three bytes it does not include the allocation/ retention policy. Otherwise it does. Copy it depending on that. We should have a macro for the clamping to reduce code duplication. The insanity does come from the MAP data and this seems to be the easiest in terms of complexity. It is an array of bytes that is transported from MAPProxy to the SGSN and then simply forwarded. http://cgit.osmocom.org/openbsc/commit/?id=313ff813b7eed8afe0aa9fa385bab0c1… commit 313ff813b7eed8afe0aa9fa385bab0c1c1a367df Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Thu Apr 23 11:33:35 2015 -0400 sgsn: Store subscribed QoS and attempt to use it * Fix QoS encoding as it forgot the Allocation/Retention policy * Use the qos_req as it is the only one encoded for GTPv1 and as 7.7.34 http://cgit.osmocom.org/openbsc/commit/?id=9433770e84ac8a11328cf9ca6f8974ef… commit 9433770e84ac8a11328cf9ca6f8974ef55cd3df2 Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Thu Apr 23 09:53:53 2015 -0400 sgsn: Copy the msisdn to the sgsn_data and use it in PDP activation The MSISDN should be present for "security" reasons in the first activation of a PDP context. Take the encoded MSISDN, store it for future use and then put it into the PDP activation request. http://cgit.osmocom.org/openbsc/commit/?id=0b7c66d7d02761e87799a12c3be99fcb… commit 0b7c66d7d02761e87799a12c3be99fcba222c077 Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Thu Apr 23 09:13:01 2015 -0400 gsup: Extract the QoS field http://cgit.osmocom.org/openbsc/commit/?id=3d9f6cc536e805d51001d9ae68abfa75… commit 3d9f6cc536e805d51001d9ae68abfa75433c6c33 Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Wed Apr 22 23:09:41 2015 -0400 gsup: Extract the new MSISDN string http://cgit.osmocom.org/openbsc/commit/?id=c510ac0c09d2875cd4efa254c25e6cf7… commit c510ac0c09d2875cd4efa254c25e6cf7cc5891f3 Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Wed Apr 22 22:42:23 2015 -0400 gsup: Specify the QoS service for the PDP info http://cgit.osmocom.org/openbsc/commit/?id=7400ac3a3e93a914932ac43d48a0ace0… commit 7400ac3a3e93a914932ac43d48a0ace035abcf9b Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Wed Apr 22 22:10:44 2015 -0400 gsup: Document passing MSISDN as part of the response ----------------------------------------------------------------------- Summary of changes: openbsc/configure.ac | 1 + openbsc/doc/examples/osmo-bsc/osmo-bsc.cfg | 5 + openbsc/include/openbsc/Makefile.am | 2 +- openbsc/include/openbsc/bsc_msg_filter.h | 107 ++++++ openbsc/include/openbsc/bsc_nat.h | 82 +---- openbsc/include/openbsc/bsc_nat_sccp.h | 7 +- openbsc/include/openbsc/debug.h | 1 + openbsc/include/openbsc/gprs_gsup_messages.h | 7 + openbsc/include/openbsc/gprs_sgsn.h | 5 + openbsc/include/openbsc/gsm_04_08_gprs.h | 1 + openbsc/include/openbsc/mgcp_internal.h | 2 +- openbsc/include/openbsc/osmo_bsc.h | 5 + openbsc/include/openbsc/osmo_msc_data.h | 4 + openbsc/src/Makefile.am | 2 +- openbsc/src/gprs/gprs_gsup_messages.c | 21 ++ openbsc/src/gprs/gprs_sgsn.c | 15 + openbsc/src/gprs/gprs_subscriber.c | 23 ++ openbsc/src/gprs/sgsn_libgtp.c | 41 ++- openbsc/src/gprs/sgsn_vty.c | 8 +- openbsc/src/libcommon/debug.c | 5 + openbsc/src/{libcommon => libfilter}/Makefile.am | 10 +- openbsc/src/libfilter/bsc_msg_acc.c | 116 +++++++ .../bsc_msg_filter.c} | 190 +++++------ openbsc/src/libfilter/bsc_msg_vty.c | 140 ++++++++ openbsc/src/osmo-bsc/Makefile.am | 4 +- openbsc/src/osmo-bsc/osmo_bsc_api.c | 91 ++++- openbsc/src/osmo-bsc/osmo_bsc_main.c | 9 + openbsc/src/osmo-bsc/osmo_bsc_vty.c | 66 +++- openbsc/src/osmo-bsc_nat/Makefile.am | 3 +- openbsc/src/osmo-bsc_nat/bsc_nat.c | 31 +- openbsc/src/osmo-bsc_nat/bsc_nat_ctrl.c | 11 +- openbsc/src/osmo-bsc_nat/bsc_nat_filter.c | 370 ++------------------- openbsc/src/osmo-bsc_nat/bsc_nat_utils.c | 123 +------ openbsc/src/osmo-bsc_nat/bsc_nat_vty.c | 127 +------ openbsc/src/osmo-bsc_nat/bsc_ussd.c | 20 +- openbsc/tests/bsc-nat/Makefile.am | 8 +- openbsc/tests/bsc-nat/bsc_nat_test.c | 59 ++-- openbsc/tests/gprs/gprs_test.c | 5 +- openbsc/tests/sgsn/sgsn_test.c | 9 + 39 files changed, 892 insertions(+), 844 deletions(-) create mode 100644 openbsc/include/openbsc/bsc_msg_filter.h copy openbsc/src/{libcommon => libfilter}/Makefile.am (52%) create mode 100644 openbsc/src/libfilter/bsc_msg_acc.c copy openbsc/src/{osmo-bsc_nat/bsc_nat_filter.c => libfilter/bsc_msg_filter.c} (61%) create mode 100644 openbsc/src/libfilter/bsc_msg_vty.c hooks/post-receive -- The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)

1 0

openbsc.git branch jerlbeck/wip/gprs-gsup-fixes created. 0.14.0-42-g2ef910c
by gitosis＠osmocom.org 04 May '15

04 May '15

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)". The branch, jerlbeck/wip/gprs-gsup-fixes has been created at 2ef910cff276d7d488b255dcf341143be645eefe (commit) - Log ----------------------------------------------------------------- http://cgit.osmocom.org/openbsc/commit/?id=2ef910cff276d7d488b255dcf341143b… commit 2ef910cff276d7d488b255dcf341143be645eefe Author: Jacob Erlbeck <jerlbeck(a)sysmocom.de> Date: Mon May 4 10:21:34 2015 +0200 gsup: (Jacob) Specify the QoS service for the PDP info (TODO) TODO: - There should be some textual description about what to expect in the QoS value area. Sponsored-by: On-Waves ehf http://cgit.osmocom.org/openbsc/commit/?id=32dfa6d340a618149cbc61d0de8c7202… commit 32dfa6d340a618149cbc61d0de8c7202863829b8 Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Wed Apr 22 22:42:23 2015 -0400 gsup: Specify the QoS service for the PDP info http://cgit.osmocom.org/openbsc/commit/?id=a27f7bb653e4beb7129765889f69d876… commit a27f7bb653e4beb7129765889f69d8761f2f89f4 Author: Jacob Erlbeck <jerlbeck(a)sysmocom.de> Date: Thu Apr 30 08:28:06 2015 +0200 gsup: (Jacob) Document passing MSISDN as part of the response Sponsored-by: On-Waves ehf http://cgit.osmocom.org/openbsc/commit/?id=2bf403500209931688ded12ae397899b… commit 2bf403500209931688ded12ae397899b662d7f91 Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Wed Apr 22 22:10:44 2015 -0400 gsup: Document passing MSISDN as part of the response ----------------------------------------------------------------------- hooks/post-receive -- The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)

1 0

osmo-pcu.git branch jerlbeck/master created. 0.2-409-g801d6fe
by gitosis＠osmocom.org 04 May '15

04 May '15

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "UNNAMED PROJECT". The branch, jerlbeck/master has been created at 801d6fe40cd5bd11257074c7aaf113a57919fb2d (commit) - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-pcu/commit/?id=801d6fe40cd5bd11257074c7aaf113a… commit 801d6fe40cd5bd11257074c7aaf113a57919fb2d Author: Jacob Erlbeck <jerlbeck(a)sysmocom.de> Date: Mon May 4 09:44:19 2015 +0200 tbf/test: Fix old_tbf argument to tbf_alloc_ul_tbf Currently the ul_tbf is used in its own declaration as an argument to tbf_alloc_ul_tbf, where dl_tbf can be used instead and makes more sense. This commit uses dl_tbf instead of ul_tbf as old_tbf. Addresses: tbf/TbfTest.cpp:71:14: warning: ‘ul_tbf’ may be used uninitialized in this function Sponsored-by: On-Waves ehf http://cgit.osmocom.org/osmo-pcu/commit/?id=0494c75a53f05a5ec4c4b3830672ef2… commit 0494c75a53f05a5ec4c4b3830672ef2451396f27 Author: Jacob Erlbeck <jerlbeck(a)sysmocom.de> Date: Mon May 4 09:34:00 2015 +0200 pcu_emu/test: Initialise current_test Currently the global current_test is not initialised, which leads to memory access failures. In addition, the variable is signed but used in comparisons with unsigned values. This commit changes the type to size_t and initialises the variable to 0. Sponsored-by: On-Waves ehf http://cgit.osmocom.org/osmo-pcu/commit/?id=0d39dc92b5cfe6e8be9b2a68eaf50c9… commit 0d39dc92b5cfe6e8be9b2a68eaf50c94cae97355 Author: Jacob Erlbeck <jerlbeck(a)sysmocom.de> Date: Mon May 4 09:13:28 2015 +0200 l1if: Add missing function prototypes A few prototypes are not part of any header files, leading to corresponding compiler warnings. This commit adds the missing prototypes to sysmo_l1_if.h. Addresses: sysmo_l1_if.c:347:2: warning: implicit declaration of function ‘l1if_transport_open’ sysmo_l1_if.c:364:3: warning: implicit declaration of function ‘l1if_transport_close’ sysmo_l1_fwd.c:89:3: warning: implicit declaration of function ‘l1if_handle_sysprim’ sysmo_l1_fwd.c:91:3: warning: implicit declaration of function ‘l1if_handle_l1prim’ sysmo_l1_hw.c:109:3: warning: implicit declaration of function ‘l1if_handle_sysprim’ sysmo_l1_hw.c:118:3: warning: implicit declaration of function ‘l1if_handle_l1prim’ Sponsored-by: On-Waves ehf http://cgit.osmocom.org/osmo-pcu/commit/?id=1f33294b1c1394c6ff0dd109ff10bb6… commit 1f33294b1c1394c6ff0dd109ff10bb65886c1a44 Author: Jacob Erlbeck <jerlbeck(a)sysmocom.de> Date: Mon May 4 08:21:17 2015 +0200 pcu: Fix non-critical warnings These fixes do not affect the semantics of the code. They either help gcc by providing default values that won't be used ("may be uninitialised"), remove unused variables, or change signed to unsigned variables to avoid comparison warnings. Addresses: bts.cpp:494:32: warning: 'tbf' may be used uninitialized in this function emu/test_replay_gprs_attach.cpp:81:27: warning: comparison between signed and unsigned integer expressions emu/test_pdp_activation.cpp:95:23: warning: unused variable ‘budh’ emu/test_pdp_activation.cpp:97:6: warning: variable ‘rc’ set but not used emu/pcu_emu.cpp:109:26: warning: unused variable ‘bts’ alloc/AllocTest.cpp:74:27: warning: unused variable ‘tbf’ osmocom/core/utils.h:13:50: warning: comparison between signed and unsigned integer expressions types/TypesTest.cpp:319:7: warning: unused variable ‘count’ types/TypesTest.cpp:320:11: warning: unused variable ‘rbb’ alloc/AllocTest.cpp:74:27: warning: unused variable ‘tbf’ alloc/AllocTest.cpp:132:11: warning: unused variable ‘ts_no’ http://cgit.osmocom.org/osmo-pcu/commit/?id=2acfbebfd3b7fc24ccaf2115e7c8d55… commit 2acfbebfd3b7fc24ccaf2115e7c8d55e94cd1450 Author: Jacob Erlbeck <jerlbeck(a)sysmocom.de> Date: Thu Apr 30 17:55:16 2015 +0200 vty: Fix value range of commands accepting csecs Currently an uint8_t csec variable is used to temporarily store the number of centiseconds which can be set within the range 1 - 65535. This way values above 255 cannot be set properly. This affects the VTY commands "queue lifetime", "queue hysteres", and "queue idle-ack-delay". This commit replaces the uint8_t by an uint16_t. Sponsored-by: On-Waves ehf http://cgit.osmocom.org/osmo-pcu/commit/?id=c0c580c414e4fe0bd82ebc78ff12bb1… commit c0c580c414e4fe0bd82ebc78ff12bb1014cd5a9c Author: Jacob Erlbeck <jerlbeck(a)sysmocom.de> Date: Thu Apr 30 15:59:01 2015 +0200 vty: Fix warnings about undeclared functions This commit adds missing includes to pcu_vty.c and fixes the llist_head type (missing struct keyword) used by tbf_print_vty_info. Sponsored-by: On-Waves ehf ----------------------------------------------------------------------- hooks/post-receive -- UNNAMED PROJECT

1 0