osmocom-commitlog

osmocom-commitlog@lists.osmocom.org

7948 discussions

openbsc.git branch achemeris/meas_json created. 0.14.0-102-g08ab9b7
by gitosis＠osmocom.org 10 Jun '15

10 Jun '15

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)". The branch, achemeris/meas_json has been created at 08ab9b71e787701fb4affa6ae0ff199506e338d3 (commit) - Log ----------------------------------------------------------------- http://cgit.osmocom.org/openbsc/commit/?id=08ab9b71e787701fb4affa6ae0ff1995… commit 08ab9b71e787701fb4affa6ae0ff199506e338d3 Author: Alexander Chemeris <Alexander.Chemeris(a)gmail.com> Date: Wed Jun 10 18:55:28 2015 -0400 utils: 'meas_json' utility to convert measurement feed into a JSON feed. ----------------------------------------------------------------------- hooks/post-receive -- The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)

1 0

osmo-bts.git branch achemeris/loopback updated. 0.3.0-261-g5fb10f6
by gitosis＠osmocom.org 10 Jun '15

10 Jun '15

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Osmocom BTS-side code (Abis, scheduling, ...)". The branch, achemeris/loopback has been updated via 5fb10f653e256a20a66a507108ad904989d5e6d8 (commit) via 7f03c72929b9d3150320459a65d377ef96df059a (commit) via 007b2379253894149c469834a84040e0ca33ab40 (commit) via 6ed073b1cb038d348c902ba32ea2750b4a8dca8d (commit) from 3a1fd7ce0fd44e8146deb9cc62318a1955ce6634 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-bts/commit/?id=5fb10f653e256a20a66a507108ad904… commit 5fb10f653e256a20a66a507108ad904989d5e6d8 Author: Alexander Chemeris <Alexander.Chemeris(a)gmail.com> Date: Wed Jun 10 00:47:13 2015 -0400 trx: Support "bad burst" frames coming from osmo-trx. Todo: We should actually send command to enable this mode in osmo-trx. http://cgit.osmocom.org/osmo-bts/commit/?id=7f03c72929b9d3150320459a65d377e… commit 7f03c72929b9d3150320459a65d377ef96df059a Author: Alexander Chemeris <Alexander.Chemeris(a)gmail.com> Date: Wed Jun 10 00:45:08 2015 -0400 trx: Process undecodable frames coming from osmo-trx. The purpose is to support RSSI measurements even when we can't decode a burst. This commit also cleans up and abstracts some of the code in scheduler.c http://cgit.osmocom.org/osmo-bts/commit/?id=007b2379253894149c469834a84040e… commit 007b2379253894149c469834a84040e0ca33ab40 Author: Alexander Chemeris <Alexander.Chemeris(a)gmail.com> Date: Wed Jun 10 00:27:18 2015 -0400 trx: Assume 100% BER if total decoded bits is 0 in l1if_process_meas_res() http://cgit.osmocom.org/osmo-bts/commit/?id=6ed073b1cb038d348c902ba32ea2750… commit 6ed073b1cb038d348c902ba32ea2750b4a8dca8d Author: Alexander Chemeris <Alexander.Chemeris(a)gmail.com> Date: Wed Jun 10 00:26:14 2015 -0400 trx: Cleanup unused parts of loops.c ----------------------------------------------------------------------- Summary of changes: src/osmo-bts-trx/l1_if.c | 3 +- src/osmo-bts-trx/l1_if.h | 1 + src/osmo-bts-trx/loops.c | 14 +-- src/osmo-bts-trx/loops.h | 2 +- src/osmo-bts-trx/scheduler.c | 255 ++++++++++++++++++++++++++++--------------- src/osmo-bts-trx/scheduler.h | 6 +- src/osmo-bts-trx/trx_if.c | 66 +++++++---- 7 files changed, 224 insertions(+), 123 deletions(-) hooks/post-receive -- Osmocom BTS-side code (Abis, scheduling, ...)

1 0

osmo-trx.git branch fairwaves/pending updated. ed88b23b4a3a49d959eb892f945c248e395fd8b5
by gitosis＠osmocom.org 10 Jun '15

10 Jun '15

1 0

osmo-trx.git branch achemeris/empty-bursts updated. 7ae4d7651e64c7d0e06f2f534835d3077b777a64
by gitosis＠osmocom.org 10 Jun '15

10 Jun '15

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "OpenBTS' transceiver retro-fit". The branch, achemeris/empty-bursts has been updated discards 1f0500e4ccf8c61d869f4b771de776d2d709fe22 (commit) discards c8dd57973bfc31eed1f9e6140f5d02c20ea89295 (commit) via 7ae4d7651e64c7d0e06f2f534835d3077b777a64 (commit) via ed88b23b4a3a49d959eb892f945c248e395fd8b5 (commit) This update added new revisions after undoing existing revisions. That is to say, the old revision is not a strict subset of the new revision. This situation occurs when you --force push a change and generate a repository containing something like this: * -- * -- B -- O -- O -- O (1f0500e4ccf8c61d869f4b771de776d2d709fe22) \ N -- N -- N (7ae4d7651e64c7d0e06f2f534835d3077b777a64) When this happens we assume that you've already had alert emails for all of the O revisions, and so we here report only the revisions in the N branch from the common base, B. Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-trx/commit/?id=7ae4d7651e64c7d0e06f2f534835d30… commit 7ae4d7651e64c7d0e06f2f534835d3077b777a64 Author: Alexander Chemeris <Alexander.Chemeris(a)gmail.com> Date: Mon Jun 8 23:48:26 2015 -0400 Transceiver: Add an option to send RSSI to the GSM core even if the burst is not demodulated. The feature is enabled when the GSM core sends "SENDEMPTY 1" command. http://cgit.osmocom.org/osmo-trx/commit/?id=ed88b23b4a3a49d959eb892f945c248… commit ed88b23b4a3a49d959eb892f945c248e395fd8b5 Author: Alexander Chemeris <Alexander.Chemeris(a)gmail.com> Date: Tue Jun 9 20:52:11 2015 -0400 sigProcLib: Abstract out common part of Normal/RACH burst detection. As a side change - get rid of passing toa and amp arguments as pointers and use references instead. The commit doesn't change behaviour, but makes the code cleaner. ----------------------------------------------------------------------- Summary of changes: hooks/post-receive -- OpenBTS' transceiver retro-fit

1 0

osmo-trx.git branch achemeris/empty-bursts updated. 1f0500e4ccf8c61d869f4b771de776d2d709fe22
by gitosis＠osmocom.org 10 Jun '15

10 Jun '15

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "OpenBTS' transceiver retro-fit". The branch, achemeris/empty-bursts has been updated via 1f0500e4ccf8c61d869f4b771de776d2d709fe22 (commit) from c8dd57973bfc31eed1f9e6140f5d02c20ea89295 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-trx/commit/?id=1f0500e4ccf8c61d869f4b771de776d… commit 1f0500e4ccf8c61d869f4b771de776d2d709fe22 Author: Alexander Chemeris <Alexander.Chemeris(a)gmail.com> Date: Tue Jun 9 20:52:11 2015 -0400 sigProcLib: Abstract out common part of Normal/RACH burst detection. As a side change - get rid of passing toa and amp arguments as pointers and use references instead. The commit doesn't change behaviour, but makes the code cleaner. ----------------------------------------------------------------------- Summary of changes: Transceiver52M/Transceiver.cpp | 6 +- Transceiver52M/sigProcLib.cpp | 123 ++++++++++++++++++----------------------- Transceiver52M/sigProcLib.h | 18 +++--- 3 files changed, 65 insertions(+), 82 deletions(-) hooks/post-receive -- OpenBTS' transceiver retro-fit

1 0

osmo-pcu.git branch jerlbeck/master updated. 0.2-459-g37e896d
by gitosis＠osmocom.org 09 Jun '15

09 Jun '15

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "UNNAMED PROJECT". The branch, jerlbeck/master has been updated via 37e896dff112fda77c29de770a0d8b3fe8800a5a (commit) via b33e675e5a9f80be81ffef87ba3a9ed05d6945c5 (commit) via 8158ea7288f57d7bc66d8ccd1c278999fd656076 (commit) via 144a1d0516187d09f80c8b9125c6e51b4988503f (commit) via 8322d08071d740b033941271d584a52d25565a94 (commit) via a17fccbcf47bff8f0cca7f3f02d55d63cf5b4d01 (commit) via 1751c62c980f8d6ed965e08fcb9ad1af485d8854 (commit) via f47f68a9d8e4421398e2369e4b18de8c52a9d396 (commit) via 62e96a3535714088a5dabe3cb4a8523165b19877 (commit) via a700dd9e11d31805cfe8dd07fc27ac96425cbf0c (commit) via 17214bb06de4a1d8b626dab0f695017b0c74b358 (commit) via befc760f8677d794e5a0dbc1f02f8ac85b649aa0 (commit) via 489a2b35d87610fb077a51de696555a54e5fb247 (commit) via 10ed79553a8e7241b69c4155325c29105c7a606d (commit) via 1d0a52a3497ada98bb4013ba907a00b4ab9a1ccd (commit) via 6dbe822062d54a6c765c6fa7e2c6b79a5dff29b1 (commit) via b3f713bd7be2af9bf7c3168099d35df089020164 (commit) via 3c91cb881d6a5126673e88d8421a207efec6a42d (commit) from a098c19b5531e175a308fbe4aee39c54cb3c71f1 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- ----------------------------------------------------------------------- Summary of changes: src/Makefile.am | 2 + src/bts.cpp | 3 +- src/bts.h | 4 + src/encoding.cpp | 4 +- src/gprs_ms.cpp | 99 ++++++++++++++++- src/gprs_ms.h | 50 ++++++++- src/gprs_ms_storage.cpp | 5 +- src/gprs_ms_storage.h | 6 +- src/gprs_rlcmac_ts_alloc.cpp | 14 +-- src/llc.cpp | 76 +++++++------- src/llc.h | 36 +++++-- src/pcu_main.cpp | 6 ++ src/pcu_vty.c | 140 ++++++++++++++++++++++++- src/pcu_vty_functions.cpp | 108 +++++++++++++++++++ src/{gprs_ms_storage.h => pcu_vty_functions.h} | 33 +++--- src/rlc.h | 2 + src/sysmo_l1_if.c | 6 ++ src/tbf.cpp | 48 ++++++++- src/tbf.h | 17 +-- src/tbf_dl.cpp | 111 ++++++++++++++++---- tests/alloc/AllocTest.cpp | 3 + tests/ms/MsTest.cpp | 12 +-- tests/tbf/TbfTest.cpp | 10 +- tests/tbf/TbfTest.err | 41 +++++++- 24 files changed, 711 insertions(+), 125 deletions(-) create mode 100644 src/pcu_vty_functions.cpp copy src/{gprs_ms_storage.h => pcu_vty_functions.h} (62%) hooks/post-receive -- UNNAMED PROJECT

1 0

osmo-pcu.git branch jerlbeck/wip/ms-struct updated. 0.2-462-gdd15678
by gitosis＠osmocom.org 09 Jun '15

09 Jun '15

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "UNNAMED PROJECT". The branch, jerlbeck/wip/ms-struct has been updated via dd1567812895ed5092d77db653be91c17cd7f5c3 (commit) via 547b8d09c439d4e73156ed414392cf8205cf2307 (commit) via 8ea626b89a82266d4cd5299a71f82638da11fc1c (commit) from 37e896dff112fda77c29de770a0d8b3fe8800a5a (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-pcu/commit/?id=dd1567812895ed5092d77db653be91c… commit dd1567812895ed5092d77db653be91c17cd7f5c3 Author: Jacob Erlbeck <jerlbeck(a)sysmocom.de> Date: Tue Jun 9 09:44:36 2015 +0200 ms: Add UL CS selection based on L1 link quality Currently the UL CS values are set to the corresponding DL CS value, eventually limited by a maximum value. This approach does not reflect the general situation of the RF link between ME and BTS, which is rather asymmetric e.g. due to a lower degree of TX efficiency of the built-in antenna. This means, that UL and DL CS control should be decoupled for better results. This commit adds automatic UL CS selection based on the link quality measurement parameter. Each coding scheme is mapped to a link quality range. If the link quality value leaves that range, the current UL CS value is increased/decreased accordingly. This value will be copied when the next PACKET_UPLINK_ACK_NACK or PACKET_UPLINK_ASSIGMENT is sent to the MS. The following VTY command will be added to the config-pcu node: - cs link-quality-ranges cs1 <0-20> cs2 <0-20> <0-20> cs3 <0-20> <0-20> cs4 <0-20> which sets the ranges for the four coding schemes. For instance the example below reflects the current default values: cs link-quality-ranges cs1 5 cs2 4 8 cs3 7 12 cs4 10 set the following ranges, where the overlapping is used to configure a hysteresis: CS1: -inf .. 5 CS2: 4 .. 8 CS3: 7 .. 12 CS4: 10 .. inf Sponsored-by: On-Waves ehf http://cgit.osmocom.org/osmo-pcu/commit/?id=547b8d09c439d4e73156ed414392cf8… commit 547b8d09c439d4e73156ed414392cf8205cf2307 Author: Jacob Erlbeck <jerlbeck(a)sysmocom.de> Date: Mon Jun 8 11:26:38 2015 +0200 ms: Store the L1 measurement values in the MS objects This commits adds the GprsMs::update_l1_meas() and GprsMs::l1_meas() methods to store and access the measurement values. The internal state is updated depending on which values are actually set. In addition, these values are shown in the output of the 'show ms imsi|tlli' command. Sponsored-by: On-Waves ehf http://cgit.osmocom.org/osmo-pcu/commit/?id=8ea626b89a82266d4cd5299a71f8263… commit 8ea626b89a82266d4cd5299a71f82638da11fc1c Author: Jacob Erlbeck <jerlbeck(a)sysmocom.de> Date: Mon Jun 8 11:05:45 2015 +0200 l1: Pass all L1 measurements upwards (TODO) Currently only the RSSI value is passed to the upper layers. Other values like TA and BER which are needed for TA update respectively CS selection are not propagated. This commit introduces and passes a struct that contains a set of measurement values. TODO: - the struct is currently defined in pcu_l1_if.h. Consider to put it into a separate file. Sponsored-by: On-Waves ehf ----------------------------------------------------------------------- Summary of changes: src/bts.cpp | 10 ++++---- src/bts.h | 7 ++++-- src/gprs_ms.cpp | 60 ++++++++++++++++++++++++++++++++++++++++------- src/gprs_ms.h | 6 +++++ src/pcu_l1_if.cpp | 8 ++++--- src/pcu_l1_if.h | 34 ++++++++++++++++++++++++++- src/pcu_main.cpp | 9 +++++++ src/pcu_vty.c | 45 +++++++++++++++++++++++++++++++++++ src/pcu_vty_functions.cpp | 12 ++++++++++ src/sysmo_l1_if.c | 18 +++++++++++--- src/tbf.h | 4 +++- src/tbf_ul.cpp | 9 ++++++- tests/tbf/TbfTest.cpp | 9 ++++--- 13 files changed, 205 insertions(+), 26 deletions(-) hooks/post-receive -- UNNAMED PROJECT

1 0

osmo-trx.git branch achemeris/empty-bursts created. c8dd57973bfc31eed1f9e6140f5d02c20ea89295
by gitosis＠osmocom.org 09 Jun '15

09 Jun '15

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "OpenBTS' transceiver retro-fit". The branch, achemeris/empty-bursts has been created at c8dd57973bfc31eed1f9e6140f5d02c20ea89295 (commit) - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-trx/commit/?id=c8dd57973bfc31eed1f9e6140f5d02c… commit c8dd57973bfc31eed1f9e6140f5d02c20ea89295 Author: Alexander Chemeris <Alexander.Chemeris(a)gmail.com> Date: Mon Jun 8 23:48:26 2015 -0400 Transceiver: Add an option to send RSSI to the GSM core even if the burst is not demodulated. The feature is enabled when the GSM core sends "SENDEMPTY 1" command. ----------------------------------------------------------------------- hooks/post-receive -- OpenBTS' transceiver retro-fit

1 0

osmo-trx.git branch fairwaves/pending updated. 5b9069210d63fe3d8c420b63dad7be7976ef0c70
by gitosis＠osmocom.org 09 Jun '15

09 Jun '15

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "OpenBTS' transceiver retro-fit". The branch, fairwaves/pending has been updated discards 8828b65e3feaf1dce3be382104655486e938aa5c (commit) discards b594b120161861f03d7dfc15189e604a5677aa43 (commit) via 5b9069210d63fe3d8c420b63dad7be7976ef0c70 (commit) via 70cd277b4ee3c63225390384dc2485eee4e0857d (commit) This update added new revisions after undoing existing revisions. That is to say, the old revision is not a strict subset of the new revision. This situation occurs when you --force push a change and generate a repository containing something like this: * -- * -- B -- O -- O -- O (8828b65e3feaf1dce3be382104655486e938aa5c) \ N -- N -- N (5b9069210d63fe3d8c420b63dad7be7976ef0c70) When this happens we assume that you've already had alert emails for all of the O revisions, and so we here report only the revisions in the N branch from the common base, B. Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-trx/commit/?id=5b9069210d63fe3d8c420b63dad7be7… commit 5b9069210d63fe3d8c420b63dad7be7976ef0c70 Author: Alexander Chemeris <Alexander.Chemeris(a)gmail.com> Date: Mon Jun 8 23:46:54 2015 -0400 Checking in clockdump.sh utility. http://cgit.osmocom.org/osmo-trx/commit/?id=70cd277b4ee3c63225390384dc2485e… commit 70cd277b4ee3c63225390384dc2485eee4e0857d Author: Alexander Chemeris <Alexander.Chemeris(a)gmail.com> Date: Mon Jun 8 23:44:58 2015 -0400 Checking in a more relevant README. This READMY is from the OpenBTS's TRXManager and actually describes the transceiver API and behavior. ----------------------------------------------------------------------- Summary of changes: clockdump.sh => utils/clockdump.sh | 0 1 file changed, 0 insertions(+), 0 deletions(-) rename clockdump.sh => utils/clockdump.sh (100%) hooks/post-receive -- OpenBTS' transceiver retro-fit

1 0

osmo-trx.git branch fairwaves/pending updated. 8828b65e3feaf1dce3be382104655486e938aa5c
by gitosis＠osmocom.org 09 Jun '15

09 Jun '15

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "OpenBTS' transceiver retro-fit". The branch, fairwaves/pending has been updated via 8828b65e3feaf1dce3be382104655486e938aa5c (commit) via b594b120161861f03d7dfc15189e604a5677aa43 (commit) via a96a0578134a5c719a25198e9790f2e84f356f0a (commit) from 37b445d4c8ecb06ab2bd5cd5aa582de4d74b8eba (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-trx/commit/?id=8828b65e3feaf1dce3be38210465548… commit 8828b65e3feaf1dce3be382104655486e938aa5c Author: Alexander Chemeris <Alexander.Chemeris(a)gmail.com> Date: Mon Jun 8 23:14:42 2015 -0400 Cheacking in a more relevant README. This one is from the OpenBTS's TRXManager and actually describes the transceiver API and behavior. http://cgit.osmocom.org/osmo-trx/commit/?id=b594b120161861f03d7dfc15189e604… commit b594b120161861f03d7dfc15189e604a5677aa43 Author: Alexander Chemeris <Alexander.Chemeris(a)gmail.com> Date: Mon Jun 8 23:14:18 2015 -0400 Checking in clockdump.sh utility. http://cgit.osmocom.org/osmo-trx/commit/?id=a96a0578134a5c719a25198e9790f2e… commit a96a0578134a5c719a25198e9790f2e84f356f0a Author: Alexander Chemeris <Alexander.Chemeris(a)gmail.com> Date: Mon Jun 8 22:46:38 2015 -0400 Transceiver: Update noise level only when the timeslot is marked as IDLE. We can't rely on an assumption that if we can't decode a burst - it's noise. There are many rasons why we can't decode a burst even if it's well above the noise level. Just one example is a RACH burst which can be overlapped with another RACH burst up to a level both are completely unrecognizable. Another example is when a burst is destroyed by bad multi-path. ----------------------------------------------------------------------- Summary of changes: README | 218 ++++++++++++++++------------------------- Transceiver52M/Transceiver.cpp | 39 +++++--- Transceiver52M/Transceiver.h | 2 +- clockdump.sh | 3 + 4 files changed, 114 insertions(+), 148 deletions(-) create mode 100755 clockdump.sh hooks/post-receive -- OpenBTS' transceiver retro-fit

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

osmocom-commitlog