osmocom-commitlog

osmocom-commitlog@lists.osmocom.org

7948 discussions

libosmo-abis.git branch master updated. 0.3.2-17-g7f9d851
by gitosis＠osmocom.org 04 Jul '16

04 Jul '16

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Osmocom A-bis protcol interface library". The branch, master has been updated via 7f9d851d9f6a52f0a28d5b7c3d41797e0698ba94 (commit) from b4698ef0d923c3a904b6c3ea9ce3fcfd36481af0 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/libosmo-abis/commit/?id=7f9d851d9f6a52f0a28d5b7c3d4… commit 7f9d851d9f6a52f0a28d5b7c3d41797e0698ba94 Author: Harald Welte <laforge(a)gnumonks.org> Date: Mon Jul 4 09:59:46 2016 +0200 e1_input: Use osmo_pcap_lapd if using software LAPD The e1_input code for PCAP writing uses the Layer3 RSL/OML message and prepends a fake LAPD header. This means that all frames look like UI frames in wireshark. In case we use in-kernel LAPD of mISDN, this is the best we can do. However, in case of software (libosmocore) LAPD, we can do better, by dumping the real LAPD frames at the interface between LAPD code and the physical layer. Related: OS#1763 Change-Id: Id0815690b5bc0a9b7f29f5cfde9d2f24c4f88ee5 ----------------------------------------------------------------------- Summary of changes: src/e1_input.c | 28 ++++++++++++++++++++++++---- 1 file changed, 24 insertions(+), 4 deletions(-) hooks/post-receive -- Osmocom A-bis protcol interface library

1 0

libosmo-abis.git branch master updated. 0.3.2-16-gb4698ef
by gitosis＠osmocom.org 04 Jul '16

04 Jul '16

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Osmocom A-bis protcol interface library". The branch, master has been updated via b4698ef0d923c3a904b6c3ea9ce3fcfd36481af0 (commit) via 47bee5bed50d1b6d6004428a2fac50f57764e7bd (commit) from c1cf14cae8a4ff8d60976eb188344595755448d5 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/libosmo-abis/commit/?id=b4698ef0d923c3a904b6c3ea9ce… commit b4698ef0d923c3a904b6c3ea9ce3fcfd36481af0 Author: Harald Welte <laforge(a)gnumonks.org> Date: Mon Jul 4 09:55:26 2016 +0200 lapd_pcap: Correctly set the pseudo-header packet type We want the direction of the packet to be properly reflected in the pseudo-header, so wireshark can display if the packet is sent in network->user (BSC->BTS) direction, or in th reverse direction. Related: OS#1764 Change-Id: I19afca0ce7e8b068bc64fa14bce6feb35aa9f1fc http://cgit.osmocom.org/libosmo-abis/commit/?id=47bee5bed50d1b6d6004428a2fa… commit 47bee5bed50d1b6d6004428a2fac50f57764e7bd Author: Harald Welte <laforge(a)gnumonks.org> Date: Mon Jul 4 09:53:44 2016 +0200 Add osmo_pcap_lapd_set_fd() function This way the caller can hand in an already-open file descriptor, rather than calling osmo_pcap_lapd_open() with a file path name. Change-Id: Ic7193907a96b0e2284cb6a8a942d2bf0fb95d7e4 ----------------------------------------------------------------------- Summary of changes: include/osmocom/abis/lapd_pcap.h | 1 + src/input/lapd_pcap.c | 41 +++++++++++++++++++++++++++++----------- 2 files changed, 31 insertions(+), 11 deletions(-) hooks/post-receive -- Osmocom A-bis protcol interface library

1 0

openbsc.git branch master updated. 0.15.0-329-g3955025
by gitosis＠osmocom.org 04 Jul '16

04 Jul '16

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)". The branch, master has been updated via 3955025c2a83a334f65322def52466c1cc86ed89 (commit) from 93408ae72719590b9a0df9ce565694956f0cc34a (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/openbsc/commit/?id=3955025c2a83a334f65322def52466c1… commit 3955025c2a83a334f65322def52466c1cc86ed89 Author: Max <msuraev(a)sysmocom.de> Date: Tue Jun 28 17:39:20 2016 +0200 SGSN: move TLLI unassignment into separate function Change-Id: Ia4df145ab03ebcaad70a13601cff60c488a5de54 Related: OS#1582 ----------------------------------------------------------------------- Summary of changes: openbsc/include/openbsc/gprs_llc.h | 1 + openbsc/src/gprs/gprs_gmm.c | 26 ++++++++------------------ openbsc/src/gprs/gprs_llc.c | 7 +++++++ openbsc/src/gprs/gprs_sgsn.c | 2 +- openbsc/tests/sgsn/sgsn_test.c | 2 +- 5 files changed, 18 insertions(+), 20 deletions(-) hooks/post-receive -- The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)

1 0

openbsc.git branch master updated. 0.15.0-328-g93408ae
by gitosis＠osmocom.org 04 Jul '16

04 Jul '16

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)". The branch, master has been updated via 93408ae72719590b9a0df9ce565694956f0cc34a (commit) from 896c6f8e9e608374605abfec4b58ce44313a59bb (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/openbsc/commit/?id=93408ae72719590b9a0df9ce56569495… commit 93408ae72719590b9a0df9ce565694956f0cc34a Author: Max <msuraev(a)sysmocom.de> Date: Tue Jun 28 14:10:16 2016 +0200 SGSN: add vty config for choosing GPRS encryption Change-Id: I07d65205be1c75d59744426629ed04cf3cd99f79 Related: OS#1582 ----------------------------------------------------------------------- Summary of changes: openbsc/include/openbsc/sgsn.h | 3 ++- openbsc/src/gprs/sgsn_vty.c | 31 ++++++++++++++++++++++++++++++- 2 files changed, 32 insertions(+), 2 deletions(-) hooks/post-receive -- The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)

1 0

openbsc.git branch master updated. 0.15.0-327-g896c6f8
by gitosis＠osmocom.org 04 Jul '16

04 Jul '16

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)". The branch, master has been updated via 896c6f8e9e608374605abfec4b58ce44313a59bb (commit) from 488902db2ac6c8815cb50dac0aab32f96190cd65 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/openbsc/commit/?id=896c6f8e9e608374605abfec4b58ce44… commit 896c6f8e9e608374605abfec4b58ce44313a59bb Author: Max <msuraev(a)sysmocom.de> Date: Fri Jul 1 15:24:44 2016 +0200 SGSN: force GSUP CN domain to PS Always set CN domain in outgoing GSUP packets to PS to make it compatible with osmo-auc. Change-Id: Ia6ee2e55a41a8ea9e465d7df1b2b3559b553fca8 Related: OS#1582 ----------------------------------------------------------------------- Summary of changes: openbsc/src/gprs/gprs_subscriber.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) hooks/post-receive -- The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)

1 0

libosmocore.git branch master updated. 0.9.0-192-g0ee90f8
by gitosis＠osmocom.org 04 Jul '16

04 Jul '16

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "An utility library for Open Source Mobile Communications". The branch, master has been updated via 0ee90f861458a68be7d7ac6e7f253c2be03ae049 (commit) from dda9dffca9bda905bc33d5995923277e861a80c2 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/libosmocore/commit/?id=0ee90f861458a68be7d7ac6e7f25… commit 0ee90f861458a68be7d7ac6e7f253c2be03ae049 Author: Harald Welte <laforge(a)gnumonks.org> Date: Sun Jul 3 20:45:21 2016 +0200 lapd_dl_flush_hist(): Don't flush a non-existant history If lapd_dl_flush_hist() is called after lapd_dl_exit(), dl->tx_hist has already been free'd and set to NULL. Check for this before attempting to de-reference a NULL pointer. This bug breaks OpenBSC with any E1 based BTSs using DAHDI. Change-Id: I117ba3445fa5e8097e21c11c5a6337de6ba46c7d Related: OS#1760 ----------------------------------------------------------------------- Summary of changes: src/gsm/lapd_core.c | 3 +++ 1 file changed, 3 insertions(+) hooks/post-receive -- An utility library for Open Source Mobile Communications

1 0

osmo-bts.git branch sysmocom/old-stable updated. 0.3.0-249-geba708d
by gitosis＠osmocom.org 02 Jul '16

02 Jul '16

1 0

osmo-bts.git branch sysmocom/old-stable updated. 0.3.0-248-g9f21df0
by gitosis＠osmocom.org 02 Jul '16

02 Jul '16

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Osmocom BTS-side code (Abis, scheduling, ...)". The branch, sysmocom/old-stable has been updated via 9f21df049144d3f4244b24e789c9820ca631379e (commit) via befb0dde93181b4ba43e5e63e01db085162a445a (commit) via f41e1ae11b604d2146b658639d732eef61c3dbb0 (commit) via f4cefcfb15003aeb43fd284ce94c4cbbbf7f4b94 (commit) from 5646fc1be9cb636c1b4771d9a21a18ccacd59c5f (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-bts/commit/?id=9f21df049144d3f4244b24e789c9820… commit 9f21df049144d3f4244b24e789c9820ca631379e Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Fri Jul 1 20:56:27 2016 +0200 sysmobts: Store a simple network config in the EEPROM as well Make it possible to store: * Static vs. DHCP mode * IPv4 address * Netmask * GW IPv4 address * DNS IPv4 address Add a simple CRC8 and pick 0xFF as initial value so an all zero EEPROM will not generate a 0 CRC. The code tries to differentiate exit code between unreadable EEPROM and CRC error. This is a reference to see if we want to have store it in the EEPROM or not. Change-Id: Ia7c59506d9f6e4cb6acd4bb0e198abd28a90f50f http://cgit.osmocom.org/osmo-bts/commit/?id=befb0dde93181b4ba43e5e63e01db08… commit befb0dde93181b4ba43e5e63e01db085162a445a Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Fri Jul 1 18:36:28 2016 +0200 sysmobts: Make reservation for mode/netmask/ip and suc Change-Id: I84a7ecb310034d1d3927008f392028b3ef87a394 http://cgit.osmocom.org/osmo-bts/commit/?id=f41e1ae11b604d2146b658639d732ee… commit f41e1ae11b604d2146b658639d732eef61c3dbb0 Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Fri Jul 1 18:16:13 2016 +0200 sysmobts: Fix eeprom padding before gpg key Correct the too short padding I introduced in the commit a55b166c6c7af79cbefe8e65fe77b2d61c634d2d. The result needs to be 121 and not 120. Add static asserts to make sure it does not happen again. Change-Id: Icaaf520a280ee58c483fa64df4e447702ec746ac http://cgit.osmocom.org/osmo-bts/commit/?id=f4cefcfb15003aeb43fd284ce94c4cb… commit f4cefcfb15003aeb43fd284ce94c4cbbbf7f4b94 Author: Holger Hans Peter Freyther <holger(a)moiji-mobile.com> Date: Wed Jun 15 09:31:13 2016 +0200 sysmobts: Add the barebox boot state reservation We are using up to 48 (actually only 8) bytes to manage the boot state of the device. Add it to the eeprom reservation. It turns out the current padding was too large (37 + 84 don't end at 120). Change-Id: I8354a05afcf3cb5f4fa1660cec78b6cbe26f9168 ----------------------------------------------------------------------- Summary of changes: src/osmo-bts-sysmo/misc/sysmobts_eeprom.h | 18 +++++- src/osmo-bts-sysmo/misc/sysmobts_par.c | 60 +++++++++++++++++ src/osmo-bts-sysmo/misc/sysmobts_par.h | 4 ++ src/osmo-bts-sysmo/misc/sysmobts_util.c | 104 +++++++++++++++++++++++++++++- 4 files changed, 184 insertions(+), 2 deletions(-) hooks/post-receive -- Osmocom BTS-side code (Abis, scheduling, ...)

1 0

osmo-auc.git branch master updated. 50d7a8ef6029a895bcb8d258352616c5e789f60f
by gitosis＠osmocom.org 01 Jul '16

01 Jul '16

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "UNNAMED PROJECT". The branch, master has been updated via 50d7a8ef6029a895bcb8d258352616c5e789f60f (commit) from cfaf968a17708c32f0c338f182f51f5d1ee68cee (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-auc/commit/?id=50d7a8ef6029a895bcb8d258352616c… commit 50d7a8ef6029a895bcb8d258352616c5e789f60f Author: Max <msuraev(a)sysmocom.de> Date: Fri Jul 1 15:19:23 2016 +0200 Add hardcoded APN Add APN '*' to PDP info part of GSUP response to make SGSN 'auth-policy remote' testing easier. ----------------------------------------------------------------------- Summary of changes: osmo-gsup-hlr/src/hlr.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) hooks/post-receive -- UNNAMED PROJECT

1 0

osmo-trx.git branch master updated. 64464e6c34d3e508669b25d0c1af98895065b131
by gitosis＠osmocom.org 01 Jul '16

01 Jul '16

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "OpenBTS' transceiver retro-fit". The branch, master has been updated via 64464e6c34d3e508669b25d0c1af98895065b131 (commit) via e88710881b3287b4f9901df8824836ac01ef3799 (commit) via a84e162672b1ccca94994f132b89fb024bcd15d4 (commit) via 76764278169d252980853251daeb9f1ba0c246e1 (commit) via 35222296fef378977a83a4ee89d8c3ef9bc62a3f (commit) via 28670fb5dad8e48ff74051a5bbe0c8309b04c817 (commit) via 05c6feb71dd2f66b74c9e1671d91570485479836 (commit) via 2e4ed1072227350ab8dd31a8458316e2a9355453 (commit) from c8c4eac55e4f44ead12489bda308ba361bb723f2 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-trx/commit/?id=64464e6c34d3e508669b25d0c1af988… commit 64464e6c34d3e508669b25d0c1af98895065b131 Author: Tom Tsou <tom.tsou(a)ettus.com> Date: Fri Jul 1 03:46:46 2016 -0700 egprs: Enable 8-PSK burst detection when EDGE is enabled The command line EDGE option will enable 8-PSK burst detection on any slot where a normal burst is expected. The burst search order is 8-PSK first followed by GMSK. EDGE will force 4 SPS sampling on Tx and Rx. Along with twice the search correlation from 8-PSK and GMSK, EDGE will increase CPU utilization. Whether the increase is notable or not is dependent on the particular machine. Signed-off-by: Tom Tsou <tom.tsou(a)ettus.com> http://cgit.osmocom.org/osmo-trx/commit/?id=e88710881b3287b4f9901df8824836a… commit e88710881b3287b4f9901df8824836ac01ef3799 Author: Tom Tsou <tom.tsou(a)ettus.com> Date: Fri Jul 1 02:46:04 2016 -0700 egprs: Enable 8-PSK length vectors on the Tx interface Allow EGPRS 8-PSK length bit vectors of length 444 (148 * 3) to pass in through the Tx socket interface. Length is the sole factor in determining whether to modulate a bit vector using GMSK or 8-PSK. Tested with 8-PSK training sequences with random payload originating from osmo-bts. Output verified with Agilent E4406A. Signed-off-by: Tom Tsou <tom.tsou(a)ettus.com> http://cgit.osmocom.org/osmo-trx/commit/?id=a84e162672b1ccca94994f132b89fb0… commit a84e162672b1ccca94994f132b89fb024bcd15d4 Author: Tom Tsou <tom.tsou(a)ettus.com> Date: Wed Jun 29 14:50:25 2016 -0700 sigproc: Adjust burst detection threshold criteria Reduce the burst detection threshold to pass more bursts to upper layers, but force stricter requirements on the computation itself. For the latter, we now require at least 5 samples (rather than 2) to compute a peak-to-average value. End result is increased burst detection at low SNR conditions with a small increase in false positive bursts when no signal is present. Signed-off-by: Tom Tsou <tom.tsou(a)ettus.com> http://cgit.osmocom.org/osmo-trx/commit/?id=76764278169d252980853251daeb9f1… commit 76764278169d252980853251daeb9f1ba0c246e1 Author: Tom Tsou <tom.tsou(a)ettus.com> Date: Fri Jun 24 14:25:39 2016 -0700 mcbts: Add multi-ARFCN radio support Add new radio interface "radioInterfaceMulti" for multi-carrier support. Only USRP B200/B210 devices are supported because of sample rate requirements (3.2 Msps). Only 4 SPS operation Tx/RX is supported. 8-PSK is supported. Other options may be added at a later time Signed-off-by: Tom Tsou <tom.tsou(a)ettus.com> http://cgit.osmocom.org/osmo-trx/commit/?id=35222296fef378977a83a4ee89d8c3e… commit 35222296fef378977a83a4ee89d8c3ef9bc62a3f Author: Tom Tsou <tom.tsou(a)ettus.com> Date: Wed Jun 22 16:16:30 2016 -0700 mcbts: Add multi-ARFCN channelizing filters Introduce polyphase channelizer (Rx) and synthesis (Tx) filterbanks, which serve as the signal processing backend for multi-carrier GSM. Fast Fourier Transform (FFT) is used internally. FFTW is added as a new build dependency. Signed-off-by: Tom Tsou <tom.tsou(a)ettus.com> http://cgit.osmocom.org/osmo-trx/commit/?id=28670fb5dad8e48ff74051a5bbe0c83… commit 28670fb5dad8e48ff74051a5bbe0c8309b04c817 Author: Tom Tsou <tom.tsou(a)ettus.com> Date: Fri Aug 21 19:32:58 2015 -0700 iface: Add inner ring-buffer implementation Two buffers, inner and outer, are used in the transceiver implementation. The outer buffer interfaces with the device receive interface to guarantee timestamp aligned and contiguously allocated sample buffers. The inner buffer absorbs vector size differences between GSM bursts (156 or 157 samples) and the resampler interface (typically fixed multiples of 65). Reimplement the inner buffer with a ring buffer that allows fixed size segments on the outer (resampler) portion and variable lengths (GSM side) on the inner side. Compared to the previous stack-like version, this implementation removes unnecessary copying of buffer contents. Signed-off-by: Tom Tsou <tom.tsou(a)ettus.com> http://cgit.osmocom.org/osmo-trx/commit/?id=05c6feb71dd2f66b74c9e1671d91570… commit 05c6feb71dd2f66b74c9e1671d91570485479836 Author: Tom Tsou <tom.tsou(a)ettus.com> Date: Wed Jun 22 16:09:44 2016 -0700 radioInterface: Convert diversity argument to general type Rather than a simple bool type, convert the diversity switch to the device interface specifer: enum InterfaceType { NORMAL, RESAMP_64M, RESAMP_100M, DIVERSITY, }; The more general specifier allows passing in special cases other then selection diversity such as multi-ARFCN support. Signed-off-by: Tom Tsou <tom.tsou(a)ettus.com> http://cgit.osmocom.org/osmo-trx/commit/?id=2e4ed1072227350ab8dd31a8458316e… commit 2e4ed1072227350ab8dd31a8458316e2a9355453 Author: Tom Tsou <tom.tsou(a)ettus.com> Date: Mon Jun 27 15:39:16 2016 -0700 transceiver: Add Rx samples-per-symbol option Previous approach was to enable 4 SPS on the receive path only for EDGE use, which is not a requirement for 4 SPS operation. Make the 4 SPS configuration setting directly settable. Signed-off-by: Tom Tsou <tom.tsou(a)ettus.com> ----------------------------------------------------------------------- Summary of changes: Transceiver52M/Channelizer.cpp | 108 ++++++++ Transceiver52M/Channelizer.h | 34 +++ Transceiver52M/ChannelizerBase.cpp | 249 +++++++++++++++++++ Transceiver52M/ChannelizerBase.h | 39 +++ Transceiver52M/Makefile.am | 17 +- Transceiver52M/Resampler.cpp | 32 +-- Transceiver52M/Resampler.h | 9 +- Transceiver52M/Synthesis.cpp | 121 +++++++++ Transceiver52M/Synthesis.h | 35 +++ Transceiver52M/Transceiver.cpp | 42 +++- Transceiver52M/Transceiver.h | 3 +- Transceiver52M/UHDDevice.cpp | 142 ++++++----- Transceiver52M/common/fft.c | 112 +++++++++ Transceiver52M/common/fft.h | 13 + Transceiver52M/osmo-trx.cpp | 72 ++++-- Transceiver52M/radioBuffer.cpp | 228 +++++++++++++++++ Transceiver52M/radioBuffer.h | 45 ++++ Transceiver52M/radioDevice.h | 15 +- Transceiver52M/radioInterface.cpp | 202 ++++++--------- Transceiver52M/radioInterface.h | 58 +++-- Transceiver52M/radioInterfaceDiversity.cpp | 47 ++-- Transceiver52M/radioInterfaceMulti.cpp | 387 +++++++++++++++++++++++++++++ Transceiver52M/radioInterfaceResamp.cpp | 81 +++--- Transceiver52M/sigProcLib.cpp | 32 ++- Transceiver52M/signalVector.cpp | 9 + Transceiver52M/signalVector.h | 1 + configure.ac | 1 + 27 files changed, 1771 insertions(+), 363 deletions(-) create mode 100644 Transceiver52M/Channelizer.cpp create mode 100644 Transceiver52M/Channelizer.h create mode 100644 Transceiver52M/ChannelizerBase.cpp create mode 100644 Transceiver52M/ChannelizerBase.h create mode 100644 Transceiver52M/Synthesis.cpp create mode 100644 Transceiver52M/Synthesis.h create mode 100644 Transceiver52M/common/fft.c create mode 100644 Transceiver52M/common/fft.h create mode 100644 Transceiver52M/radioBuffer.cpp create mode 100644 Transceiver52M/radioBuffer.h create mode 100644 Transceiver52M/radioInterfaceMulti.cpp hooks/post-receive -- OpenBTS' transceiver retro-fit

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

osmocom-commitlog