osmocom-commitlog

osmocom-commitlog@lists.osmocom.org

7948 discussions

osmo-bts.git branch master updated. 0.7.0-120-g0d6c3e8
by gitosis＠osmocom.org 26 Feb '18

26 Feb '18

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Osmocom BTS-side code (Abis, scheduling, ...)". The branch, master has been updated via 0d6c3e811007be828207c0f69ff4e2dddeeb64db (commit) via 3a80a56b9befe5f47cae5e4210ebc81d343b04f8 (commit) from 6381900677001088b8f2a74905cd3ac1994f33ba (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-bts/commit/?id=0d6c3e811007be828207c0f69ff4e2d… commit 0d6c3e811007be828207c0f69ff4e2dddeeb64db Author: Harald Welte <laforge(a)gnumonks.org> Date: Fri Feb 23 14:06:27 2018 +0100 measurement.c: Don't silently copy "FULL" measurements to "SUB" The existing code contained an ugly hack that if we didn't have any "SUB" measurements we would simply use the "FULL" values. That's wrong as TS 45.008 contains quite detailed rules on how the "SUB" values are to be computed. In some cases, they are identical to "FULL", but in most they are not. Let's remove the hack and replace it with an ERROR message, as clearly something is wrong if we ever encounter a measurement period end in which no single "SUB" measurement was received. The only situation in which this can occur is if the related uplink burst/block was missing, so let's set BER to 100% and level to lowest possible. Change-Id: I358f7b97fd4ea19264a77eff7abef13da7d5fbcd http://cgit.osmocom.org/osmo-bts/commit/?id=3a80a56b9befe5f47cae5e4210ebc81… commit 3a80a56b9befe5f47cae5e4210ebc81d343b04f8 Author: Harald Welte <laforge(a)gnumonks.org> Date: Fri Feb 23 13:59:17 2018 +0100 measurement: Compute RX{LEV,QUAL}-SUB for SDCCH and non-AMR TCH The rules on how to compute RX{LEV,QUAL}-SUB are rather convoluted, and depend on the detailed channel type and mode. For SDCCH and TCH/H in signalling mode, it's easy: No DTX is allowed, and all measurements are used in SUB. For non-AMR (TCH/F and TCH/H in non-signalling mode), we need to count the SACCH block measurements, as well as any SID/SID_UPDATE/L3_FILL/DUMMY blocks received in the blocks of table 8.3 of TS 45.008. Only AMR (TCH/AFS + TCH/AHS) are more difficult, as there are no fixed blocks/bursts/frames that always contain uplink messages, but the L1 will have to determine if a valid SID_UPDATE was received or not. This patch implements the above rules (except AMR related) in the common part of OsmoBTS. The AMR specific bits will have to follow as a later patch, likely in a BTS specific way, i.e. separate changes to sysmo/lc15/octphy/trx code. Related: OS#2978 Change-Id: I16eb3747a1c23df935a4c50dafe46abce512a474 ----------------------------------------------------------------------- Summary of changes: src/common/measurement.c | 109 ++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 104 insertions(+), 5 deletions(-) hooks/post-receive -- Osmocom BTS-side code (Abis, scheduling, ...)

1 0

osmo-bts.git branch master updated. 0.7.0-118-g6381900
by gitosis＠osmocom.org 26 Feb '18

26 Feb '18

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Osmocom BTS-side code (Abis, scheduling, ...)". The branch, master has been updated via 6381900677001088b8f2a74905cd3ac1994f33ba (commit) via bcc20a871c61c9ab6188d6abe183dbced7ac241f (commit) via 591c8993e9533da419fe1d995748b545a374416f (commit) via f100992a20ea1f833f44c8f97efcd58cd18016e0 (commit) via 49a8969bd6ff2cf89984a101677c5f09191a48ea (commit) from de3b4a248e46b5bed1cce20774dceafc74c74073 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-bts/commit/?id=6381900677001088b8f2a74905cd3ac… commit 6381900677001088b8f2a74905cd3ac1994f33ba Author: Harald Welte <laforge(a)gnumonks.org> Date: Fri Feb 23 13:37:45 2018 +0100 split scheduler_mframe.c from scheduler.c There are use cases for the multiframe scheduler tables outside the context of the entire scheduler. Let's prepare for that. Related: OS#2978 Change-Id: I6a501e66c47809ae3cdc55bef2cb6390ee0096b1 http://cgit.osmocom.org/osmo-bts/commit/?id=bcc20a871c61c9ab6188d6abe183dbc… commit bcc20a871c61c9ab6188d6abe183dbced7ac241f Author: Harald Welte <laforge(a)gnumonks.org> Date: Mon Feb 26 13:12:20 2018 +0100 {sysmo,lc15}: Fix RACH reporting in combined CBCH case Combined CCCH with CBCH is a separate PCHAN type and hence we must accept it in the list of RACH-carrying pchan types in order to correctly report the RACH chan_nr when handing RACH requests up to L1SAP. The bug this fixes likely might have rendered cells with combined CBCH impossible to use. Change-Id: I9537463e5eedd2b8b30f298e0d3b308367c5b1fb http://cgit.osmocom.org/osmo-bts/commit/?id=591c8993e9533da419fe1d995748b54… commit 591c8993e9533da419fe1d995748b545a374416f Author: Harald Welte <laforge(a)gnumonks.org> Date: Mon Feb 26 13:42:10 2018 +0100 {sysmo,lc15}: Correctly report BER to L1SAP in INFO_MEAS_IND L1SAP uses 'ber10k' values, i.e. BER in 1/10000 units, where 10000 is all errors are bit-errors (= 100%). The PHY on osmo-bts-sysmo and osmo-bts-lc15 is reporting a float fBer value scaled to 1, i.e. 1.00 = 100% and hence must be 10000 as ber10k. Before this patch, BER values reported on those BTS models were too low by a factor of 100, resulting in way too optimistic RxQual values reported to the BSC. Closes: OS#3005 Change-Id: I17e2f8fe8055f613da1e554cd36ed13289f56fb3 http://cgit.osmocom.org/osmo-bts/commit/?id=f100992a20ea1f833f44c8f97efcd58… commit f100992a20ea1f833f44c8f97efcd58cd18016e0 Author: Harald Welte <laforge(a)gnumonks.org> Date: Mon Feb 26 11:37:53 2018 +0100 octphy: Remove code duplication for BER / RSSI conversion Let's introduce some functions to hide the details of BER and RSSI conversion from OCTPHY representation to L1SAP representation. Change-Id: I517669c87a97b2ba164a2812811c8802fe0b92e8 http://cgit.osmocom.org/osmo-bts/commit/?id=49a8969bd6ff2cf89984a101677c5f0… commit 49a8969bd6ff2cf89984a101677c5f09191a48ea Author: Harald Welte <laforge(a)gnumonks.org> Date: Mon Feb 26 08:49:59 2018 +0100 counters: split rach:sent into rach:drop, rach:ho, rach:cs and rach:ps Change-Id: I51e9938df0e05b8fdb12686b9a9bb6994546deed ----------------------------------------------------------------------- Summary of changes: include/osmo-bts/bts.h | 5 +- include/osmo-bts/scheduler.h | 30 + src/common/Makefile.am | 2 +- src/common/bts.c | 5 +- src/common/l1sap.c | 8 +- src/common/scheduler.c | 815 --------------------- src/common/{scheduler.c => scheduler_mframe.c} | 935 +------------------------ src/osmo-bts-litecell15/l1_if.c | 5 +- src/osmo-bts-octphy/l1_if.c | 40 +- src/osmo-bts-sysmo/l1_if.c | 5 +- src/osmo-bts-trx/Makefile.am | 2 +- src/osmo-bts-virtual/Makefile.am | 2 +- 12 files changed, 78 insertions(+), 1776 deletions(-) copy src/common/{scheduler.c => scheduler_mframe.c} (68%) hooks/post-receive -- Osmocom BTS-side code (Abis, scheduling, ...)

1 0

openbsc.git branch pespin/jitterbuffer updated. 1.0.0-16-g5d7738ade
by gitosis＠osmocom.org 26 Feb '18

26 Feb '18

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Legacy: The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)". The branch, pespin/jitterbuffer has been updated discards a99fee1806bb0f5826985c6f0fee1e18524f2e38 (commit) via 5d7738ade085c2169258d15146dba4b3a9ccadc6 (commit) via e39e18992a3b966581f06fa632d6342643996aaa (commit) via 98a2ba4c57e95d2ce1e1e8147ea5a8d51788a191 (commit) via abc075031b123a5b093575b37c84dfe95cc1e19e (commit) via fc714cad6e5d9c5f36959c7a6a51fa7f4593f697 (commit) via cc87156a3001d243dd110f667bb0643af2e1509b (commit) via 82cfa3945c35be251dff168260d30756bc3d60db (commit) via e44a5687c4728a3ef1f730ec7349cef135cf174a (commit) via 5825e5cfb245f32a409c7784e51fb1e774adf799 (commit) via 5d69fa52cf1e679e391519dd841da1579d640087 (commit) via 75042ff46a7e89ffb9a8897214c63e0bda378147 (commit) via 0195c30df582811dd0252fb6b455c156f4a7ee95 (commit) via 71b68bed2a93359fa84617292cf6159a4ed09c16 (commit) via 3b0b0641963de7a701655c8a09d15782e61f9c75 (commit) via 2e6e39c4b2a9291251693270bd7bcad81195e66d (commit) via e18b34143c0332f027befa20cb28e098cc574ced (commit) via 577c268b96f555587b2c621d48d85a30a76cf7cf (commit) via 754a831ddc24cdf5d8883422b23f6db14c183a54 (commit) via cb1838d8075379fdc08095fdd718b459180a38ae (commit) via ed03661871ac8ee1715c04390d25631537b084ac (commit) via 888e35aa7fbb2ba40526456abab739b7c15013e0 (commit) via 6111ab5bacffd3acde4c3ed02ce0b8866177552b (commit) via f8ac21bf71548649209ed2749bf6e7317bb15c62 (commit) via 5a4594614390978f7dab05f08d607c3903163cea (commit) via 65021ac50792a42bcc21e482c27e0f915c435716 (commit) via 957ceb1b792a274582e88ed2963dc959f5385ce0 (commit) via 65c6ddebff3e03fe3bdeebf225f013b0bc30773b (commit) via db1f75c3e305b87577d219365811fa5e5037a80d (commit) via 725bcb71f07e572672bdeb878bb1fbd94bb44eba (commit) via f79eeca1095fb9493bf74c1fface8e70d61250e7 (commit) via 3ae8682f974058970fa564f09a34a51e867b896b (commit) via 1cbc7e1adf859a7d5b05fa0dbdde1bb0cb998041 (commit) via 968a6c2365c0f772fa65ebe66466715d6861e7fc (commit) via e229071479282f854656799c19a07fbe79a20e57 (commit) via 9051421d75eed22c02f01b373cfab58dbadcd4b5 (commit) via f52cf145acea5db288543de0f2e886988d5676cf (commit) via b0a6d1b92daffa37761bbb342d465c46825ad68a (commit) via 5932ff04a1c7c3c831dae366d394d7ef0f8d1ffd (commit) via e747a9b9231e286f4bc72848e039aaa9d76b269d (commit) via c9fec2af85587435248bc9bb9e1ce8d295860977 (commit) via 8560d5d616b022620aa1623bd3e0a5c7f44c662c (commit) via 6270059e14b0d1dda05b48525a834bbef027da30 (commit) via 84b7e3723b8d7bf9bfd5db7ba5532c3d174c2c77 (commit) via f0288cacc5b6be1943c25584327c80974639097e (commit) via b4962dcf115148834478744e35fe1a888eda915f (commit) via a1d8e2c4087c15561e9c4fb120042be4b187bc9c (commit) via a42b0dff4c28aa774566e045b6830a3eba455954 (commit) via 0ff59c1e1ba7b8f13c519f87b82e5dd144e219cd (commit) via b13196dea30aa8bd4c530373632285716375e32d (commit) via 5e297458845b848abf2f31dfe5d462cb2288d97f (commit) via e6222ef1acc9947dba82898a2371f48e4f3848e1 (commit) via 93ee0937ef7fecf8a25549eb123352ca1c52e63e (commit) via e4290b1501db82e47d5ae2bbd179c01e092de7bd (commit) via 4b70c9ec06c852c68aed7eb1e54faf23793602c0 (commit) via 183070bcede412e38268c7f298262710b1351f6e (commit) via 53552a303e8089d288c0caadb2b462a898589a01 (commit) via 2a55e0917d230505152b3da636a1da9a36d7fbe4 (commit) via 91dd2a62bee77b56a953e0edc55c5441aa3b5d84 (commit) via 06bd94b8f5601fddb4842e9a6a685b21f6a6d7e2 (commit) via 948847c23802ac344b0be0813d55a496d6a73263 (commit) via 406577be0a5a0f845d673d18a21d717c702bbcdf (commit) via 84fe989151e00089c674658532ecfa5a7cacc173 (commit) via cf123c0c4e43c3cad124d535afaf97c9578dcd81 (commit) via 68e4ad155de1c27cf7c7ac6dd17bed8684d7bb0c (commit) via de0dfcd00e9e73c3e07aaee535e5b977badd8579 (commit) via 7fa0bcd928ea1deac9951253850b77492bd4aad9 (commit) via ac8ca4cfd19a23131959e88be49b6c56738a38c0 (commit) via a6eaeb88f5c81ce1b3802727a3fa087da0bc4e3f (commit) via ab1316731e95f5d6b54d1f36df87e1d38185024d (commit) via 7cfd1a3beebba66d8385037a39cf7154fd5e6eb3 (commit) via 98849f7ddcbe8b094af5ee5efc30bd841ac12e04 (commit) via 52d519220501c4d4c09dfa924e23badac8589614 (commit) via f354a8e1c5633a43d7bca986e8de82d23610d2a9 (commit) via 39181ac4a2b0686fb27b35d89af2dfee1d7c285d (commit) via 8e2a142856dc7e3e482762c738b22e19a0492f1f (commit) via 53ad3ca521bacc9e0d8e0ff76f71cacb26201c27 (commit) via 0a20d62972c6e3689ac1256fe60861699ae94583 (commit) via f8b2d46dc00ff4da96c6932b6cfd5b792b36b209 (commit) via 69031ab255f3682174c7740b6957da03753a3a74 (commit) via fdb690c8030b2357f980f86805da3a88a5bc07c5 (commit) via 29ed8002c3a8c7e64f2328ef6031543628d18000 (commit) via 4e5b90a594f987266a7e9492f30780eb92b9639c (commit) via 31655d84faa7f7fe823111856ae2035d44aca0eb (commit) via 3e4295287f1a2866e6e512517a2c94f608ecbd30 (commit) via 18ca1ce2ea9f0c353e6886a9d05c61238bba9dc6 (commit) via 448ad7143b70bac8cf92beb074b8a5f889c6d00b (commit) via ba66e79953cb1c2230fe2916ef7d8de78500c7fd (commit) via 8288b1203a6631f8674f02a2964efcf22f5b26c2 (commit) via ab2454e776f1a4bc4977ef48ec2844600f85176b (commit) via 9f64c54040857079fa5ca35bf522d3befe7ac362 (commit) via 4d87e22980edb5a0ec170801980f76c837183b32 (commit) via 4b731a33783b1eb9cfb83577d8fc414433e20eb0 (commit) via 5daec07de1ea4ab1deb461049f1d6b569353d68b (commit) via 3deaa025077bef9f4b3877d3d959934533709109 (commit) via 45164a2b45e5eb6ea04137ede3a4b79eedce6c0f (commit) via 9f6760de2cf3166c169ba4018144e2cd95fafaff (commit) via 38943b7b5e0afacbbaf06b351a35c03bf903fe2a (commit) via 4d15cfce7cc5d6c22e2ca7e185d0e7f23c7b1f56 (commit) via e1b3bb1629c9259ed4e1dd4eb16a06ca49a9600f (commit) via 2d254cca1021d4b12dbb7651eff862464209bcae (commit) via 9244d110b8ae66b2691f9879ee0b6a0cbe113bae (commit) via 7cb44209eac4651d5fc65e07f74bc5325f110ea4 (commit) via 94431bf7c32506aa99efd29e3617022270ff458d (commit) via 8f7ab69d4ca2cbfa9a669c7cdee62272824be4a3 (commit) via 61a7e57d8608052a050795c1620f1e918ab80a31 (commit) via 3ea54c8fa92eaa81b1903de89cf2872e75b3c76b (commit) via 2102a4ae43eb5610c96ac21c77b94f621fa0ac64 (commit) via 21a7523fcffc0f83587f50f178c41cbed65ef9b6 (commit) via 11acfad02a833999c37ee267864d082241a90afb (commit) via eab5f594b0a7cf50ad97b039f73beff42cc8312a (commit) via 5a44d25ad343d6426295480f6a0a5d6dc21350cf (commit) via 2f8b9d25f8428980e35ed8f8b2dc44324bc4566a (commit) via 8b1a2f8cd7a81c6b8c7cdb0963dcf89de7c46100 (commit) via 70fdd24d04a37217724ec8f12873e292b10e5e4d (commit) via 9b97b007dfe96b8a74932ab101d5e341b5796f75 (commit) via a60bb3dd28ce9e3720f8ee1b262893f3e233e2e6 (commit) via c51c1e795091ba7663a2303bda48cb12fa327c19 (commit) via 33e1357a903dad41745df4b5b7284e80ce542ecb (commit) via 4a824ca8fcf13427d1560b2c866da2a2d82e3692 (commit) via aef68387ae6d78df948a6b2b3a61050c4f192c5e (commit) via 71d082bec770b9664be5cf59e2723db09a645902 (commit) via 8254cf75bf818e715201c670c7fb81b9a23dec0b (commit) via 3f86c523eea75e3da7f0495c7e43b944356d2321 (commit) via 2abd5e1663f34cee545edcc9e4592ec45b6c0c1e (commit) via 645eb622832671a2256987f1857da86cd50a9eea (commit) via 7fe00fb9be1dddbaee175be0217fddd8858c7aad (commit) via 0483f338209a3eae91dd5cf6f568eb81ece5f6a9 (commit) via 0de69a2501e1d49a8202daaeb9cdd7bfee62effa (commit) via 5f72f6fccc50412acc7d0a2e921bb723a2105d63 (commit) via 271ceca86216ba0b22f7ba5222a5331766fb3d8c (commit) via 2faeb1ac6cc054737b153b08be1de3846256a820 (commit) via 722bbb402f4dbf6eaea09c728fb9406ba4c026d1 (commit) via f8aeb2cccb767c8823e1c851efd8de86a226033e (commit) via f14cb3535cf469632b5da63f35b31aa79fd0c5c3 (commit) via 872671e01ba4c081ca642b1bb7abee8fe7c4af45 (commit) via a229756885907bf46c820649e87396a25b1ac4ae (commit) via 54050a28ede20242a79ef3851057c63f454773c9 (commit) via 854bcc2b7b36c4b9fc965cd8104006705d09edb7 (commit) via e586f41692f1e7d2386c52ae9caa81b6d9a2de08 (commit) via 67798617b53c1ca37668ef5c57de27b97cd57035 (commit) via b4999b60d48bcbb5aa575973d068e07ab672e095 (commit) via 94bbc73bce304609124e9f617953a11634905d58 (commit) via 6f483d3a05c7c006a36ca6868bbd1846d00c9afc (commit) via 1fe2647c5de6c460dd776787f039bbc51ed779a0 (commit) via 5265bea76c90427d70257b7fac0f0b7d40a015cb (commit) via 320960cf9d28474098dad11bd1042f2a58d87fac (commit) via 9f77d7bd0e39cfd0f3e952c5b375abba5a415d37 (commit) via 71124de33c86ea5740eeabea381bff80b23ffd30 (commit) via defb6c95c14e95133891312b65436eef5964e0a3 (commit) via 845a3a4c594f56fc754eae3b261675b460aec2ac (commit) via f39d03ad21d8120af847603d9b2ead71b8c4ba43 (commit) via 1ebf23b7fe631dbafcc2dc4a1e8a8beced4ecc0d (commit) via 7590ff3fd6cde4264f6e7961f8d9dcafbb526271 (commit) via 34ce3d93c52a734a7380114254a14ce8bcc77bb1 (commit) via 5121576b0c6c323ae5f92d8d987b8c0899d99db0 (commit) via 7b62d54b52457ecae649ead12e67369b3e09c235 (commit) via 2b6c5407b6889325beb1a1aa0fd5f33718756de2 (commit) via 7507aef92b75c86b6ecc11b2a7bbbc378a8dea51 (commit) via 93ffbd0029d1200dfa51a0e68b4c11743f1cc0e8 (commit) via 638ad068e8597af81dc985d3d256ccc26e82373b (commit) via fd2c1f90ba590fbb8c790e3619713769817997de (commit) via 310b73079814584c0ff92772939f9cc80e1c0171 (commit) via 7b5dbc280510b6ad74d08b71bcf387b0f970a0bd (commit) via c6e8a01e706ac95561888e03e15e891884aa7d68 (commit) via 50eb66996d4d68d32f6b1ee8c9adfc8046808266 (commit) via 086067f0a13846590130379bfeffeb2962cd4708 (commit) via 7bb383a45c7684b7df078edc2bdadd473b52365c (commit) via 6d8e5198ad17e70f27010dbf7c86d25477de90e1 (commit) via 6f0e50c8337355eb59033903ede9ab6528890835 (commit) via a18001d50605b0c7d4ae54c812b8766f8e7f5f61 (commit) This update added new revisions after undoing existing revisions. That is to say, the old revision is not a strict subset of the new revision. This situation occurs when you --force push a change and generate a repository containing something like this: * -- * -- B -- O -- O -- O (a99fee1806bb0f5826985c6f0fee1e18524f2e38) \ N -- N -- N (5d7738ade085c2169258d15146dba4b3a9ccadc6) When this happens we assume that you've already had alert emails for all of the O revisions, and so we here report only the revisions in the N branch from the common base, B. Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/openbsc/commit/?id=5d7738ade085c2169258d15146dba4b3… commit 5d7738ade085c2169258d15146dba4b3a9ccadc6 Author: Pau Espin Pedrol <pespin(a)sysmocom.de> Date: Thu Apr 27 15:59:19 2017 +0200 mgcp: Add jitter buffer on the uplink receiver Change-Id: Ibf3932adc07442fb5e9c7a06404853f9d0a20959 ----------------------------------------------------------------------- Summary of changes: contrib/jenkins.sh | 90 +- debian/changelog | 959 +++ debian/control | 69 +- debian/openbsc-dev.install | 1 - debian/osmo-gtphub.default | 2 - debian/osmo-gtphub.examples | 1 - debian/osmo-gtphub.init | 150 - debian/osmo-gtphub.install | 1 - debian/osmocom-bsc-sccplite.examples | 2 + debian/osmocom-bsc-sccplite.install | 2 + debian/osmocom-bsc.examples | 1 - debian/osmocom-bsc.install | 2 - debian/osmocom-gbproxy.init | 151 - debian/osmocom-gbproxy.install | 1 - debian/osmocom-nitb.install | 1 + debian/osmocom-sgsn.default | 2 - debian/osmocom-sgsn.examples | 1 - debian/osmocom-sgsn.init | 150 - debian/osmocom-sgsn.install | 1 - debian/rules | 8 +- openbsc/.gitignore | 17 +- openbsc/Makefile.am | 3 + openbsc/configure.ac | 39 +- openbsc/contrib/bsc-test/msc.sh | 4 +- openbsc/contrib/gprs/gb-proxy-unblock-bug.py | 58 - openbsc/contrib/gprs/gprs-bssgp-histogram.lua | 78 - openbsc/contrib/gprs/gprs-buffer-count.lua | 80 - openbsc/contrib/gprs/gprs-split-trace-by-tlli.lua | 46 - openbsc/contrib/gprs/gprs-verify-nu.lua | 59 - ...{osmo-bsc.service => osmo-bsc-sccplite.service} | 2 +- openbsc/contrib/systemd/osmo-gbproxy.service | 12 - openbsc/contrib/systemd/osmo-sgsn.service | 11 - .../osmo-bsc-sccplite.cfg} | 12 - .../examples/osmo-gbproxy/osmo-gbproxy-legacy.cfg | 44 - openbsc/doc/examples/osmo-gbproxy/osmo-gbproxy.cfg | 25 - .../doc/examples/osmo-gtphub/gtphub-example.txt | 90 - .../examples/osmo-gtphub/osmo-gtphub-1iface.cfg | 25 - openbsc/doc/examples/osmo-gtphub/osmo-gtphub.cfg | 25 - .../osmo-nitb/bs11/openbsc-1bts-2trx-hopping.cfg | 11 - .../examples/osmo-nitb/bs11/openbsc-1bts-2trx.cfg | 2 - .../examples/osmo-nitb/bs11/openbsc-2bts-2trx.cfg | 2 - openbsc/doc/examples/osmo-nitb/bs11/openbsc.cfg | 2 - .../osmo-nitb/nanobts/openbsc-multitrx.cfg | 11 - openbsc/doc/examples/osmo-nitb/nanobts/openbsc.cfg | 11 - .../osmo-nitb/nokia/openbsc_nokia_3trx.cfg | 2 - openbsc/doc/examples/osmo-nitb/rbs2308/openbsc.cfg | 12 - .../doc/examples/osmo-nitb/sysmobts/openbsc.cfg | 11 - openbsc/doc/examples/osmo-sgsn/osmo-sgsn.cfg | 26 - openbsc/include/openbsc/Makefile.am | 28 +- openbsc/include/openbsc/abis_nm.h | 21 +- openbsc/include/openbsc/abis_rsl.h | 5 +- openbsc/include/openbsc/bsc_msc_data.h | 1 + openbsc/include/openbsc/common_cs.h | 8 - openbsc/include/openbsc/crc24.h | 10 - openbsc/include/openbsc/debug.h | 1 + openbsc/include/openbsc/gb_proxy.h | 288 - openbsc/include/openbsc/gprs_gb_parse.h | 59 - openbsc/include/openbsc/gprs_gmm.h | 35 - openbsc/include/openbsc/gprs_llc.h | 284 - openbsc/include/openbsc/gprs_llc_xid.h | 57 - openbsc/include/openbsc/gprs_sgsn.h | 473 -- openbsc/include/openbsc/gprs_sndcp.h | 79 - openbsc/include/openbsc/gprs_sndcp_comp.h | 82 - openbsc/include/openbsc/gprs_sndcp_dcomp.h | 53 - openbsc/include/openbsc/gprs_sndcp_pcomp.h | 46 - openbsc/include/openbsc/gprs_sndcp_xid.h | 218 - openbsc/include/openbsc/gprs_subscriber.h | 31 - openbsc/include/openbsc/gprs_utils.h | 45 - openbsc/include/openbsc/gsm_04_08.h | 16 +- openbsc/include/openbsc/gsm_04_11.h | 5 + openbsc/include/openbsc/gsm_04_14.h | 15 + openbsc/include/openbsc/gsm_04_80.h | 9 +- openbsc/include/openbsc/gsm_data.h | 35 +- openbsc/include/openbsc/gsm_data_shared.h | 90 +- openbsc/include/openbsc/gsm_subscriber.h | 5 - openbsc/include/openbsc/gtphub.h | 523 -- openbsc/include/openbsc/osmux.h | 3 +- openbsc/include/openbsc/pcu_if.h | 35 + openbsc/include/openbsc/pcuif_proto.h | 176 + openbsc/include/openbsc/rest_octets.h | 42 +- openbsc/include/openbsc/sgsn.h | 186 - openbsc/include/openbsc/signal.h | 21 +- openbsc/include/openbsc/slhc.h | 187 - openbsc/include/openbsc/system_information.h | 7 +- openbsc/include/openbsc/v42bis.h | 147 - openbsc/include/openbsc/v42bis_private.h | 126 - openbsc/include/openbsc/vty.h | 1 - openbsc/osmoappdesc.py | 13 +- openbsc/src/Makefile.am | 1 - openbsc/src/gprs/.gitignore | 2 - openbsc/src/gprs/Makefile.am | 132 - openbsc/src/gprs/crc24.c | 67 - openbsc/src/gprs/gb_proxy.c | 1437 ---- openbsc/src/gprs/gb_proxy_main.c | 315 - openbsc/src/gprs/gb_proxy_patch.c | 458 -- openbsc/src/gprs/gb_proxy_peer.c | 218 - openbsc/src/gprs/gb_proxy_tlli.c | 723 -- openbsc/src/gprs/gb_proxy_vty.c | 852 --- openbsc/src/gprs/gprs_gb_parse.c | 637 -- openbsc/src/gprs/gprs_gmm.c | 2943 -------- openbsc/src/gprs/gprs_llc.c | 1132 --- openbsc/src/gprs/gprs_llc_parse.c | 251 - openbsc/src/gprs/gprs_llc_vty.c | 116 - openbsc/src/gprs/gprs_llc_xid.c | 281 - openbsc/src/gprs/gprs_sgsn.c | 897 --- openbsc/src/gprs/gprs_sndcp.c | 1258 ---- openbsc/src/gprs/gprs_sndcp_comp.c | 323 - openbsc/src/gprs/gprs_sndcp_dcomp.c | 358 - openbsc/src/gprs/gprs_sndcp_pcomp.c | 282 - openbsc/src/gprs/gprs_sndcp_vty.c | 71 - openbsc/src/gprs/gprs_sndcp_xid.c | 1822 ----- openbsc/src/gprs/gprs_subscriber.c | 921 --- openbsc/src/gprs/gprs_utils.c | 274 - openbsc/src/gprs/gtphub.c | 2933 -------- openbsc/src/gprs/gtphub_ares.c | 220 - openbsc/src/gprs/gtphub_main.c | 357 - openbsc/src/gprs/gtphub_sock.c | 60 - openbsc/src/gprs/gtphub_vty.c | 613 -- openbsc/src/gprs/osmo_sgsn.cfg | 23 - openbsc/src/gprs/sgsn_ares.c | 175 - openbsc/src/gprs/sgsn_auth.c | 312 - openbsc/src/gprs/sgsn_cdr.c | 258 - openbsc/src/gprs/sgsn_ctrl.c | 80 - openbsc/src/gprs/sgsn_libgtp.c | 861 --- openbsc/src/gprs/sgsn_main.c | 462 -- openbsc/src/gprs/sgsn_vty.c | 1322 ---- openbsc/src/gprs/slhc.c | 813 --- openbsc/src/gprs/v42bis.c | 767 --- openbsc/src/ipaccess/abisip-find.c | 4 +- openbsc/src/ipaccess/ipaccess-config.c | 45 +- openbsc/src/ipaccess/ipaccess-proxy.c | 3 +- openbsc/src/libbsc/Makefile.am | 1 + openbsc/src/libbsc/abis_nm.c | 264 +- openbsc/src/libbsc/abis_nm_vty.c | 1 - openbsc/src/libbsc/abis_om2000_vty.c | 2 - openbsc/src/libbsc/abis_rsl.c | 118 +- openbsc/src/libbsc/bsc_api.c | 26 +- openbsc/src/libbsc/bsc_init.c | 59 +- openbsc/src/libbsc/bsc_msc.c | 6 +- openbsc/src/libbsc/bsc_rf_ctrl.c | 20 +- openbsc/src/libbsc/bsc_rll.c | 4 +- openbsc/src/libbsc/bsc_vty.c | 529 +- openbsc/src/libbsc/bts_ericsson_rbs2000.c | 2 + openbsc/src/libbsc/bts_ipaccess_nanobts.c | 6 + openbsc/src/libbsc/bts_ipaccess_nanobts_omlattr.c | 14 +- openbsc/src/libbsc/bts_nokia_site.c | 4 +- openbsc/src/libbsc/e1_config.c | 6 +- openbsc/src/libbsc/gsm_04_08_utils.c | 7 +- openbsc/src/libbsc/handover_decision.c | 2 +- openbsc/src/libbsc/handover_logic.c | 4 +- openbsc/src/libbsc/net_init.c | 13 +- openbsc/src/libbsc/paging.c | 11 +- openbsc/src/libbsc/pcu_sock.c | 742 ++ openbsc/src/libbsc/rest_octets.c | 290 +- openbsc/src/libbsc/system_information.c | 312 +- openbsc/src/libcommon-cs/common_cs.c | 4 + openbsc/src/libcommon-cs/common_cs_vty.c | 5 +- openbsc/src/libcommon/common_vty.c | 8 - openbsc/src/libcommon/debug.c | 5 + openbsc/src/libcommon/gsm_data.c | 80 +- openbsc/src/libcommon/gsm_data_shared.c | 89 +- openbsc/src/libcommon/gsup_client.c | 6 +- openbsc/src/libcommon/gsup_test_client.c | 3 +- openbsc/src/libmgcp/mgcp_osmux.c | 9 +- openbsc/src/libmgcp/mgcp_protocol.c | 47 +- openbsc/src/libmgcp/mgcp_vty.c | 26 +- openbsc/src/libmsc/Makefile.am | 1 + openbsc/src/libmsc/auth.c | 26 +- openbsc/src/libmsc/ctrl_commands.c | 21 +- openbsc/src/libmsc/db.c | 219 +- openbsc/src/libmsc/gsm_04_08.c | 27 +- openbsc/src/libmsc/gsm_04_11.c | 237 +- openbsc/src/libmsc/gsm_04_14.c | 132 + openbsc/src/libmsc/smpp_openbsc.c | 272 +- openbsc/src/libmsc/smpp_smsc.c | 35 +- openbsc/src/libmsc/smpp_smsc.h | 23 +- openbsc/src/libmsc/smpp_vty.c | 2 - openbsc/src/libmsc/sms_queue.c | 6 +- openbsc/src/libmsc/transaction.c | 7 + openbsc/src/libmsc/ussd.c | 23 +- openbsc/src/libmsc/vty_interface_layer3.c | 119 +- openbsc/src/osmo-bsc/Makefile.am | 7 +- openbsc/src/osmo-bsc/osmo_bsc_bssap.c | 37 + openbsc/src/osmo-bsc/osmo_bsc_ctrl.c | 34 +- openbsc/src/osmo-bsc/osmo_bsc_main.c | 12 +- openbsc/src/osmo-bsc/osmo_bsc_msc.c | 6 +- openbsc/src/osmo-bsc/osmo_bsc_sccp.c | 8 +- openbsc/src/osmo-bsc/osmo_bsc_vty.c | 20 +- openbsc/src/osmo-bsc_nat/bsc_nat.c | 12 +- openbsc/src/osmo-bsc_nat/bsc_nat_ctrl.c | 6 +- openbsc/src/osmo-bsc_nat/bsc_nat_utils.c | 2 +- openbsc/src/osmo-bsc_nat/bsc_nat_vty.c | 31 +- openbsc/src/osmo-bsc_nat/bsc_ussd.c | 3 +- openbsc/src/osmo-nitb/bsc_hack.c | 11 +- openbsc/src/utils/Makefile.am | 9 +- openbsc/src/utils/bs11_config.c | 2 +- openbsc/src/utils/smpp_mirror.c | 34 +- openbsc/tests/Makefile.am | 18 - openbsc/tests/abis/Makefile.am | 1 - openbsc/tests/abis/abis_test.c | 104 +- openbsc/tests/abis/abis_test.ok | 14 +- openbsc/tests/atlocal.in | 3 - openbsc/tests/channel/channel_test.c | 50 +- openbsc/tests/channel/channel_test.ok | 1 + openbsc/tests/ctrl_test_runner.py | 65 +- openbsc/tests/db/db_test.err | 1 + openbsc/tests/gbproxy/Makefile.am | 54 - openbsc/tests/gbproxy/gbproxy_test.c | 4971 -------------- openbsc/tests/gbproxy/gbproxy_test.ok | 7244 -------------------- openbsc/tests/gprs/Makefile.am | 10 - openbsc/tests/gprs/gprs_test.c | 236 - openbsc/tests/gprs/gprs_test.ok | 17 - openbsc/tests/gsm0408/gsm0408_test.c | 295 +- openbsc/tests/gsm0408/gsm0408_test.ok | 180 +- openbsc/tests/gtphub/Makefile.am | 42 - openbsc/tests/gtphub/gtphub_test.c | 1786 ----- openbsc/tests/gtphub/gtphub_test.ok | 42 - openbsc/tests/mgcp/Makefile.am | 1 + openbsc/tests/mgcp/mgcp_test.c | 6 +- .../tests/nanobts_omlattr/nanobts_omlattr_test.c | 5 +- openbsc/tests/oap/Makefile.am | 36 - openbsc/tests/oap/oap_client_test.c | 270 - openbsc/tests/oap/oap_client_test.err | 35 - openbsc/tests/oap/oap_client_test.ok | 2 - openbsc/tests/sgsn/Makefile.am | 82 - openbsc/tests/sgsn/sgsn_test.c | 2487 ------- openbsc/tests/sgsn/sgsn_test.ok | 45 - openbsc/tests/slhc/Makefile.am | 15 - openbsc/tests/slhc/slhc_test.c | 272 - openbsc/tests/slhc/slhc_test.ok | 154 - openbsc/tests/sndcp_xid/Makefile.am | 20 - openbsc/tests/sndcp_xid/sndcp_xid_test.c | 284 - openbsc/tests/sndcp_xid/sndcp_xid_test.ok | 11 - openbsc/tests/testsuite.at | 62 - openbsc/tests/v42bis/Makefile.am | 15 - openbsc/tests/v42bis/v42bis_test.c | 435 -- openbsc/tests/v42bis/v42bis_test.ok | 648 -- openbsc/tests/vty_test_runner.py | 268 +- openbsc/tests/xid/Makefile.am | 39 - openbsc/tests/xid/xid_test.c | 164 - openbsc/tests/xid/xid_test.ok | 12 - 241 files changed, 5124 insertions(+), 50347 deletions(-) delete mode 100644 debian/osmo-gtphub.default delete mode 100644 debian/osmo-gtphub.examples delete mode 100755 debian/osmo-gtphub.init delete mode 100644 debian/osmo-gtphub.install create mode 100644 debian/osmocom-bsc-sccplite.examples create mode 100644 debian/osmocom-bsc-sccplite.install delete mode 100644 debian/osmocom-bsc.examples delete mode 100644 debian/osmocom-bsc.install delete mode 100755 debian/osmocom-gbproxy.init delete mode 100644 debian/osmocom-gbproxy.install delete mode 100644 debian/osmocom-sgsn.default delete mode 100644 debian/osmocom-sgsn.examples delete mode 100755 debian/osmocom-sgsn.init delete mode 100644 debian/osmocom-sgsn.install delete mode 100755 openbsc/contrib/gprs/gb-proxy-unblock-bug.py delete mode 100644 openbsc/contrib/gprs/gprs-bssgp-histogram.lua delete mode 100644 openbsc/contrib/gprs/gprs-buffer-count.lua delete mode 100644 openbsc/contrib/gprs/gprs-split-trace-by-tlli.lua delete mode 100644 openbsc/contrib/gprs/gprs-verify-nu.lua rename openbsc/contrib/systemd/{osmo-bsc.service => osmo-bsc-sccplite.service} (65%) delete mode 100644 openbsc/contrib/systemd/osmo-gbproxy.service delete mode 100644 openbsc/contrib/systemd/osmo-sgsn.service rename openbsc/doc/examples/{osmo-bsc/osmo-bsc.cfg => osmo-bsc-sccplite/osmo-bsc-sccplite.cfg} (91%) delete mode 100644 openbsc/doc/examples/osmo-gbproxy/osmo-gbproxy-legacy.cfg delete mode 100644 openbsc/doc/examples/osmo-gbproxy/osmo-gbproxy.cfg delete mode 100644 openbsc/doc/examples/osmo-gtphub/gtphub-example.txt delete mode 100644 openbsc/doc/examples/osmo-gtphub/osmo-gtphub-1iface.cfg delete mode 100644 openbsc/doc/examples/osmo-gtphub/osmo-gtphub.cfg delete mode 100644 openbsc/doc/examples/osmo-sgsn/osmo-sgsn.cfg delete mode 100644 openbsc/include/openbsc/crc24.h delete mode 100644 openbsc/include/openbsc/gb_proxy.h delete mode 100644 openbsc/include/openbsc/gprs_gb_parse.h delete mode 100644 openbsc/include/openbsc/gprs_gmm.h delete mode 100644 openbsc/include/openbsc/gprs_llc.h delete mode 100644 openbsc/include/openbsc/gprs_llc_xid.h delete mode 100644 openbsc/include/openbsc/gprs_sgsn.h delete mode 100644 openbsc/include/openbsc/gprs_sndcp.h delete mode 100644 openbsc/include/openbsc/gprs_sndcp_comp.h delete mode 100644 openbsc/include/openbsc/gprs_sndcp_dcomp.h delete mode 100644 openbsc/include/openbsc/gprs_sndcp_pcomp.h delete mode 100644 openbsc/include/openbsc/gprs_sndcp_xid.h delete mode 100644 openbsc/include/openbsc/gprs_subscriber.h delete mode 100644 openbsc/include/openbsc/gprs_utils.h create mode 100644 openbsc/include/openbsc/gsm_04_14.h delete mode 100644 openbsc/include/openbsc/gtphub.h create mode 100644 openbsc/include/openbsc/pcu_if.h create mode 100644 openbsc/include/openbsc/pcuif_proto.h delete mode 100644 openbsc/include/openbsc/sgsn.h delete mode 100644 openbsc/include/openbsc/slhc.h delete mode 100644 openbsc/include/openbsc/v42bis.h delete mode 100644 openbsc/include/openbsc/v42bis_private.h delete mode 100644 openbsc/src/gprs/.gitignore delete mode 100644 openbsc/src/gprs/Makefile.am delete mode 100644 openbsc/src/gprs/crc24.c delete mode 100644 openbsc/src/gprs/gb_proxy.c delete mode 100644 openbsc/src/gprs/gb_proxy_main.c delete mode 100644 openbsc/src/gprs/gb_proxy_patch.c delete mode 100644 openbsc/src/gprs/gb_proxy_peer.c delete mode 100644 openbsc/src/gprs/gb_proxy_tlli.c delete mode 100644 openbsc/src/gprs/gb_proxy_vty.c delete mode 100644 openbsc/src/gprs/gprs_gb_parse.c delete mode 100644 openbsc/src/gprs/gprs_gmm.c delete mode 100644 openbsc/src/gprs/gprs_llc.c delete mode 100644 openbsc/src/gprs/gprs_llc_parse.c delete mode 100644 openbsc/src/gprs/gprs_llc_vty.c delete mode 100644 openbsc/src/gprs/gprs_llc_xid.c delete mode 100644 openbsc/src/gprs/gprs_sgsn.c delete mode 100644 openbsc/src/gprs/gprs_sndcp.c delete mode 100644 openbsc/src/gprs/gprs_sndcp_comp.c delete mode 100644 openbsc/src/gprs/gprs_sndcp_dcomp.c delete mode 100644 openbsc/src/gprs/gprs_sndcp_pcomp.c delete mode 100644 openbsc/src/gprs/gprs_sndcp_vty.c delete mode 100644 openbsc/src/gprs/gprs_sndcp_xid.c delete mode 100644 openbsc/src/gprs/gprs_subscriber.c delete mode 100644 openbsc/src/gprs/gprs_utils.c delete mode 100644 openbsc/src/gprs/gtphub.c delete mode 100644 openbsc/src/gprs/gtphub_ares.c delete mode 100644 openbsc/src/gprs/gtphub_main.c delete mode 100644 openbsc/src/gprs/gtphub_sock.c delete mode 100644 openbsc/src/gprs/gtphub_vty.c delete mode 100644 openbsc/src/gprs/osmo_sgsn.cfg delete mode 100644 openbsc/src/gprs/sgsn_ares.c delete mode 100644 openbsc/src/gprs/sgsn_auth.c delete mode 100644 openbsc/src/gprs/sgsn_cdr.c delete mode 100644 openbsc/src/gprs/sgsn_ctrl.c delete mode 100644 openbsc/src/gprs/sgsn_libgtp.c delete mode 100644 openbsc/src/gprs/sgsn_main.c delete mode 100644 openbsc/src/gprs/sgsn_vty.c delete mode 100644 openbsc/src/gprs/slhc.c delete mode 100644 openbsc/src/gprs/v42bis.c create mode 100644 openbsc/src/libbsc/pcu_sock.c create mode 100644 openbsc/src/libmsc/gsm_04_14.c delete mode 100644 openbsc/tests/gbproxy/Makefile.am delete mode 100644 openbsc/tests/gbproxy/gbproxy_test.c delete mode 100644 openbsc/tests/gbproxy/gbproxy_test.ok delete mode 100644 openbsc/tests/gprs/Makefile.am delete mode 100644 openbsc/tests/gprs/gprs_test.c delete mode 100644 openbsc/tests/gprs/gprs_test.ok delete mode 100644 openbsc/tests/gtphub/Makefile.am delete mode 100644 openbsc/tests/gtphub/gtphub_test.c delete mode 100644 openbsc/tests/gtphub/gtphub_test.ok delete mode 100644 openbsc/tests/oap/Makefile.am delete mode 100644 openbsc/tests/oap/oap_client_test.c delete mode 100644 openbsc/tests/oap/oap_client_test.err delete mode 100644 openbsc/tests/oap/oap_client_test.ok delete mode 100644 openbsc/tests/sgsn/Makefile.am delete mode 100644 openbsc/tests/sgsn/sgsn_test.c delete mode 100644 openbsc/tests/sgsn/sgsn_test.ok delete mode 100644 openbsc/tests/slhc/Makefile.am delete mode 100644 openbsc/tests/slhc/slhc_test.c delete mode 100644 openbsc/tests/slhc/slhc_test.ok delete mode 100644 openbsc/tests/sndcp_xid/Makefile.am delete mode 100644 openbsc/tests/sndcp_xid/sndcp_xid_test.c delete mode 100644 openbsc/tests/sndcp_xid/sndcp_xid_test.ok delete mode 100644 openbsc/tests/v42bis/Makefile.am delete mode 100644 openbsc/tests/v42bis/v42bis_test.c delete mode 100644 openbsc/tests/v42bis/v42bis_test.ok delete mode 100644 openbsc/tests/xid/Makefile.am delete mode 100644 openbsc/tests/xid/xid_test.c delete mode 100644 openbsc/tests/xid/xid_test.ok hooks/post-receive -- Legacy: The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)

1 0

libosmo-netif.git branch pespin/jitterbuffer updated. 0.1.1-22-gcde6815
by gitosis＠osmocom.org 26 Feb '18

26 Feb '18

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Osmocom network interface library". The branch, pespin/jitterbuffer has been updated discards 89180efea12f2f748517156bc5ee13c01d104524 (commit) discards 76e852d2a6217c49849deb1a5f9cb8402e509ee5 (commit) discards 5746bb868ecb48924f2ff634c5ec2ad8d4baf591 (commit) discards a409ae63e3d035f7f15da07755cd392bec53e6c6 (commit) discards b3c1f5e0ddc718c9014a7afbe3e33874d192a4f4 (commit) discards 4b292a8939147fb055ebaa87d6e53069c824c731 (commit) discards 032b950b30aa382cc3716d40d3a58c2b5d140c0e (commit) discards f28e85d48ff0048500625e6d67232443a0e1cfae (commit) discards 7652418623942f16d6bb6ee6f8133536daa308d6 (commit) via cde6815efa38616be3bca3b16386a1e7e9ff3770 (commit) via e245cdfb04a9b382f0943ffa7e29a9eea4d325dd (commit) via 8283292c4b01da2d893aafc844c9dfa123a39381 (commit) via b55e6ca74825c4ecacd11ec21d57959c6e4bcbbe (commit) via 12131da94cf3fcb6f562be513ba3381152411afc (commit) via 8e39adfed8e5b0a6786827a8323b37fa0397d426 (commit) via 84ec6cfde314c76a227e72dfaca0abc77f3b7be9 (commit) via 350120cda3201e84a9626d71b6846dbd0aef1b55 (commit) via e7b2a8f4eab92fc95d1368fe4acd61a24face5b3 (commit) via f27fdf89dc52799e7c908493da2c9ccdf7b1d3c4 (commit) via 2cbaf4139ae768ff5a79c79d389045b4ef4dd0e6 (commit) via 3f93caea6e404618f2da49410e2f06e40aaac83e (commit) via 3173ca7ac7e9c6c9e2ff9bb80a9d27a3c10c7608 (commit) via c72be77aa330c968f9f1d624e38141b3c2e24323 (commit) via b6e8d39417b217e9bbf396d50c3ef2a91a6c4054 (commit) via 2547e87b94223d2a90057d87aa821f3745687196 (commit) via 6d4acefb69b6a6f7fe29bb398ec617d7e3e01a71 (commit) via bea215a565390009ddc79b830db334fa33cc7b3a (commit) via fb31c0953c90496a96627821a95806175e4a2dde (commit) via 443f40a6bf8bd153625820e7e6541b283c236ded (commit) via cc7f236a4a2398f3f618c430fc4e1616c9d940bd (commit) via 1274b374301ed7087e5316be0544111ede07cc15 (commit) via 5edefaf0e6ec3b0839fc0afd5f3bd7253df066ce (commit) via 358350468f8c31c9f05a41ede46627a47cce1f4a (commit) via bdfe9682fef3606092fccc5b288f364fe22ec640 (commit) via c2c8b5c557650a1842029fd081ffddca6db65af6 (commit) via c01033fcacd7b87cc9eb47279a5d40445d770c18 (commit) via 61b5b65debf407bb89da9df2b329d650f9526b29 (commit) via d8f2b38eb96592567398c69bafdb9b3ecb82432e (commit) via 77d08a67b53fe92856cdec9b3da91a980381d0cc (commit) via 05bb1c2b2ef02c340d098be50546a0fafaecdb4e (commit) via 1bfbf98f066dc1fa34bffb5377220323ea7aa802 (commit) via a2b50809c766bfb1f94ac0fc7c76517e3e3a66ab (commit) via 8440357d4cc88479921350344e435ee9c5e4e0f1 (commit) via fae8559ff5ce825a874eeb33b2f1053430c07dc3 (commit) via c98bf1b880ec10924cd12477bf46ef5d0f959257 (commit) via 59941982083f7f0d6ab11f7bbb42c297a3fb8d69 (commit) via 14af167a5553519d8164f4a21556888535eeefeb (commit) via 9c5f01e7b2cb1455314443ceaeb035326354d280 (commit) via 03b84ec99ba591950b6598c682f6f7083c8cc2f5 (commit) via e3189dc8c2161cafd465a59077a5fc2e0cf4ac4f (commit) This update added new revisions after undoing existing revisions. That is to say, the old revision is not a strict subset of the new revision. This situation occurs when you --force push a change and generate a repository containing something like this: * -- * -- B -- O -- O -- O (89180efea12f2f748517156bc5ee13c01d104524) \ N -- N -- N (cde6815efa38616be3bca3b16386a1e7e9ff3770) When this happens we assume that you've already had alert emails for all of the O revisions, and so we here report only the revisions in the N branch from the common base, B. Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/libosmo-netif/commit/?id=cde6815efa38616be3bca3b163… commit cde6815efa38616be3bca3b16386a1e7e9ff3770 Author: Pau Espin Pedrol <pespin(a)sysmocom.de> Date: Fri Jun 9 14:04:31 2017 +0200 jibuf: Estimate src clock skew Change-Id: Ifae633d53107417a8e2f9b0f200d2711db72d199 http://cgit.osmocom.org/libosmo-netif/commit/?id=e245cdfb04a9b382f0943ffa7e… commit e245cdfb04a9b382f0943ffa7e29a9eea4d325dd Author: Pau Espin Pedrol <pespin(a)sysmocom.de> Date: Thu Jun 8 17:08:13 2017 +0200 tests: jibuf: enable mouse control in gnuplot script Change-Id: I0ccf4d6fd57f1634e86b713e6c915d2c96aea0e8 http://cgit.osmocom.org/libosmo-netif/commit/?id=8283292c4b01da2d893aafc844… commit 8283292c4b01da2d893aafc844c9dfa123a39381 Author: Pau Espin Pedrol <pespin(a)sysmocom.de> Date: Thu Jun 8 17:06:58 2017 +0200 tests: jibuf_test: Add parameters to control size of buffer Change-Id: I8a7fa39985f8d197e24c32cab80299aba2d03087 http://cgit.osmocom.org/libosmo-netif/commit/?id=b55e6ca74825c4ecacd11ec21d… commit b55e6ca74825c4ecacd11ec21d57959c6e4bcbbe Author: Pau Espin Pedrol <pespin(a)sysmocom.de> Date: Sun Apr 23 19:22:15 2017 +0200 jibuf: re-sync clock out of sync timestamps Change-Id: I33556b33d7549654442d9bdd7f31128792506652 http://cgit.osmocom.org/libosmo-netif/commit/?id=12131da94cf3fcb6f562be513b… commit 12131da94cf3fcb6f562be513ba3381152411afc Author: Pau Espin Pedrol <pespin(a)sysmocom.de> Date: Wed Apr 19 17:25:09 2017 +0200 jibuf: Take RTP marker into account Change-Id: Ie142acfb45650e0af775f58226fd191beaf8178e http://cgit.osmocom.org/libosmo-netif/commit/?id=8e39adfed8e5b0a6786827a832… commit 8e39adfed8e5b0a6786827a8323b37fa0397d426 Author: Pau Espin Pedrol <pespin(a)sysmocom.de> Date: Wed Apr 19 18:58:00 2017 +0200 tests: jibuf_test: Add OSMUX support Change-Id: I0f02da0329e6739ff340d31113161bb520b1b760 http://cgit.osmocom.org/libosmo-netif/commit/?id=84ec6cfde314c76a227e72dfac… commit 84ec6cfde314c76a227e72dfaca0abc77f3b7be9 Author: Pau Espin Pedrol <pespin(a)sysmocom.de> Date: Wed Apr 19 13:30:10 2017 +0200 tests: jibuf: Improve jibuf_test to read pcaps Change-Id: I7a13c823fb70e0adbc5fa0726fd66b15dc40014e Signed-off-by: Pau Espin Pedrol <pespin(a)sysmocom.de> http://cgit.osmocom.org/libosmo-netif/commit/?id=350120cda3201e84a9626d71b6… commit 350120cda3201e84a9626d71b6846dbd0aef1b55 Author: Pau Espin Pedrol <pespin(a)sysmocom.de> Date: Wed Apr 19 17:20:34 2017 +0200 jibuf: Add osmo_jibuf_empty API This is useful to know if we need to keep iterating over osmo_select_main() to dequeue packets before finishing. Change-Id: I91a23e220c56924b847265c5dc752f286b109c2c http://cgit.osmocom.org/libosmo-netif/commit/?id=e7b2a8f4eab92fc95d1368fe4a… commit e7b2a8f4eab92fc95d1368fe4acd61a24face5b3 Author: Pau Espin Pedrol <pespin(a)sysmocom.de> Date: Wed Apr 12 19:36:47 2017 +0200 jibuf: Add initial implementation of Jitter Buffer Change-Id: I9688ba9c4d5b733b9f29d0f15f73750f9271ef55 ----------------------------------------------------------------------- Summary of changes: .gitignore | 4 + Makefile.am | 2 + TODO-RELEASE | 9 ++ configure.ac | 20 ++- contrib/jenkins.sh | 14 ++- debian/changelog | 14 ++- debian/control | 13 +- debian/copyright | 22 +--- ...libosmonetif3.install => libosmonetif4.install} | 0 debian/rules | 3 + examples/Makefile.am | 10 ++ examples/udp-test-client.c | 43 +++++++ examples/udp-test-server.c | 35 ++++++ examples/udp-test.h | 137 +++++++++++++++++++++ include/osmocom/netif/stream.h | 1 + src/Makefile.am | 6 +- src/amr.c | 2 + src/channel.c | 19 +++ src/channel/abis/Makefile.am | 4 +- src/channel/abis/ipa_stream_client.c | 19 +++ src/channel/abis/ipa_stream_server.c | 19 +++ src/datagram.c | 31 ++++- src/ipa.c | 19 +++ src/ipa_unit.c | 20 +++ src/osmux.c | 131 +++++++++++++------- src/rs232.c | 6 +- src/rtp.c | 51 +++++--- src/stream.c | 66 +++++++++- tests/osmux/osmux_test.c | 8 +- 29 files changed, 613 insertions(+), 115 deletions(-) create mode 100644 TODO-RELEASE rename debian/{libosmonetif3.install => libosmonetif4.install} (100%) create mode 100644 examples/udp-test-client.c create mode 100644 examples/udp-test-server.c create mode 100644 examples/udp-test.h hooks/post-receive -- Osmocom network interface library

1 0

osmo-bts.git branch master updated. 0.7.0-113-gde3b4a2
by gitosis＠osmocom.org 26 Feb '18

26 Feb '18

1 0

libosmocore.git branch master updated. 0.10.2-179-g6950b191
by gitosis＠osmocom.org 26 Feb '18

26 Feb '18

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "An utility library for Open Source Mobile Communications". The branch, master has been updated via 6950b191e84c73687f9dc77462ff66cbeaec5686 (commit) from 175a4ae93aaf1068b61041dca12962059d65ed55 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/libosmocore/commit/?id=6950b191e84c73687f9dc77462ff… commit 6950b191e84c73687f9dc77462ff66cbeaec5686 Author: Harald Welte <laforge(a)gnumonks.org> Date: Mon Feb 26 11:48:00 2018 +0100 coding: Add BER-reporting RACH decode functions For all other decode operations we report the BER, but not for the RACH. This results in osmo-bts-trx not being able to report BER to the higher layers, which is possible on other BTS backends. Let's close this gap by introducing gsm0503_rach_ext_decode_ber() and gsm0503_rach_decode_ber() with the usual n_errors / n_bits_total arguments. Change-Id: I2b1926a37bde860dcfeb0d613eb55a71271928c5 ----------------------------------------------------------------------- Summary of changes: include/osmocom/coding/gsm0503_coding.h | 10 +++++-- src/coding/gsm0503_coding.c | 46 ++++++++++++++++++++++++++++++--- src/coding/libosmocoding.map | 2 ++ tests/coding/coding_test.c | 4 +-- 4 files changed, 54 insertions(+), 8 deletions(-) hooks/post-receive -- An utility library for Open Source Mobile Communications

1 0

osmo-ci.git branch master updated. 8bab2702b45543620c28c9d8bcaef04f9656f32a
by gitosis＠osmocom.org 25 Feb '18

25 Feb '18

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "CI scripts". The branch, master has been updated via 8bab2702b45543620c28c9d8bcaef04f9656f32a (commit) via 77f5ceb8d477a81b30db4710810e78671711cb6f (commit) via 45bb81c8c08a07da3de9210b36ebcc31cb54eacd (commit) via 71cb57cc880f7ce285cdc80b8101455998096afe (commit) from 8efadaf7934ab5c3a9d3f3e5509a416d003217fb (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-ci/commit/?id=8bab2702b45543620c28c9d8bcaef04f… commit 8bab2702b45543620c28c9d8bcaef04f9656f32a Author: Alexander Couzens <lynxis(a)fe80.eu> Date: Sun Feb 25 20:38:13 2018 +0100 jenkins: gerrit-builds: replace the label linux_amd64_debian8/9 -> osmocom-gerrit-debian8/9 Introduce more precise labels to allow more flexibility when extending the jenkins setup. The linux_amd64_debian8 or linux_amd64_debian9 is used across all build jobs which make it hard to add new nodes which might only support one group of jobs. Change-Id: I900b7b50b33cc95e127ca78d2a47f59d32a6dfee http://cgit.osmocom.org/osmo-ci/commit/?id=77f5ceb8d477a81b30db4710810e7867… commit 77f5ceb8d477a81b30db4710810e78671711cb6f Author: Alexander Couzens <lynxis(a)fe80.eu> Date: Sun Feb 25 16:25:44 2018 +0100 jenkins: master-builds: replace the label linux_amd64_debian8/9 -> osmocom-master-debian8/9 Introduce more precise labels to allow more flexibility when extending the jenkins setup. The linux_amd64_debian8 or linux_amd64_debian9 is used across all build jobs which make it hard to add new nodes which might only support one group of jobs. Change-Id: I0fa3d3f81ab01e2488fe07601740f42eb54b6d9c http://cgit.osmocom.org/osmo-ci/commit/?id=45bb81c8c08a07da3de9210b36ebcc31… commit 45bb81c8c08a07da3de9210b36ebcc31cb54eacd Author: Alexander Couzens <lynxis(a)fe80.eu> Date: Sun Feb 25 16:50:02 2018 +0100 jenkins: add node admin2-deb8build to the update jobs Change-Id: I6b703b9f27865b146f20bea953fe3d6500a88166 http://cgit.osmocom.org/osmo-ci/commit/?id=71cb57cc880f7ce285cdc80b81014559… commit 71cb57cc880f7ce285cdc80b8101455998096afe Author: Alexander Couzens <lynxis(a)fe80.eu> Date: Sun Feb 25 14:07:04 2018 +0100 jenkins: add node admin2-deb9build to the update jobs Change-Id: Ie3803a46ee192dc72823291004ee20f4bdbe0126 ----------------------------------------------------------------------- Summary of changes: jobs/README.adoc | 10 ++++++++++ jobs/gerrit-verifications.yml | 8 ++++---- jobs/master-builds.yml | 8 ++++---- jobs/update-osmo-ci-on-slaves.yml | 2 +- jobs/update-osmo-python-on-slaves.yml | 2 +- 5 files changed, 20 insertions(+), 10 deletions(-) hooks/post-receive -- CI scripts

1 0

osmo-bts.git branch master updated. 0.7.0-112-g989f779
by gitosis＠osmocom.org 25 Feb '18

25 Feb '18

1 0

osmo-bts.git branch master updated. 0.7.0-111-g9c4ea74
by gitosis＠osmocom.org 25 Feb '18

25 Feb '18

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Osmocom BTS-side code (Abis, scheduling, ...)". The branch, master has been updated via 9c4ea743fdf0501be64bc09f8c6ae982da21627c (commit) from 756bfca599630ee64393d877343a9034416d20c3 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-bts/commit/?id=9c4ea743fdf0501be64bc09f8c6ae98… commit 9c4ea743fdf0501be64bc09f8c6ae982da21627c Author: Harald Welte <laforge(a)gnumonks.org> Date: Sun Feb 25 12:26:38 2018 +0100 RSL: Fix encoding of ConnectionID in IPA_DLCX_ACK Change-Id: Ifdea747e78f191902870af53692f7a70fa7ece93 Closes: OS#2999 ----------------------------------------------------------------------- Summary of changes: src/common/rsl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) hooks/post-receive -- Osmocom BTS-side code (Abis, scheduling, ...)

1 0

osmo-bts.git branch master updated. 0.7.0-110-g756bfca
by gitosis＠osmocom.org 25 Feb '18

25 Feb '18

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Osmocom BTS-side code (Abis, scheduling, ...)". The branch, master has been updated via 756bfca599630ee64393d877343a9034416d20c3 (commit) from 681be20a8c32331dcb44db2ec0e99294f1eb89ba (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-bts/commit/?id=756bfca599630ee64393d877343a903… commit 756bfca599630ee64393d877343a9034416d20c3 Author: Harald Welte <laforge(a)gnumonks.org> Date: Sun Feb 25 01:59:16 2018 +0100 RSL IPA DLCX: Avoid null-pointer dereference In case a DLCX is issued without any CRCX before, let's handle this gracefully and simply ack the DLCX anyway. Change-Id: I7c5bedccfc5a7cf552a9ce3a2dc712081c7ce177 Closes: OS#2996 ----------------------------------------------------------------------- Summary of changes: src/common/rsl.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) hooks/post-receive -- Osmocom BTS-side code (Abis, scheduling, ...)

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

osmocom-commitlog