osmocom-commitlog

osmocom-commitlog@lists.osmocom.org

7948 discussions

openbsc.git branch master updated. 1.0.0-16-g14cd21417
by gitosis＠osmocom.org 05 Mar '18

05 Mar '18

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Legacy: The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)". The branch, master has been updated via 14cd21417f8774a92900cb707064d650ea769615 (commit) from e39e18992a3b966581f06fa632d6342643996aaa (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/openbsc/commit/?id=14cd21417f8774a92900cb707064d650… commit 14cd21417f8774a92900cb707064d650ea769615 Author: Neels Hofmeyr <neels(a)hofmeyr.de> Date: Mon Mar 5 21:14:59 2018 +0100 fix build: gprs_ra_id_by_bts(): ensure to init all values After recent libosmocore commit "implement support for 3-digit MNC with leading zeros" c4fce1425e19d604c199c895e227dc2519110456 Id2240f7f518494c9df6c8bda52c0d5092f90f221, struct gprs_ra_id has a new member, namely mnc_3_digits. In gprs_ra_id_by_bts(), this new member is now not initialized and may end up having an arbitrary value, which then may amount to mnc_3_digits == true. Hence the resulting BCD representation of the MCC-MNC may inadvertently and randomly indicate a leading zero on the MNC. Use a struct assignment so that all members are guaranteed to be set, and so that mnc_3_digits will be zero in all cases. Since above libosmocore commit, nanobts_omlattr_test fails "randomly", fixed by this patch. Change-Id: I5ae899f3c236b3b4feb5c8cf762e2f2d964dbc65 ----------------------------------------------------------------------- Summary of changes: openbsc/src/libcommon/gsm_data.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) hooks/post-receive -- Legacy: The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)

1 0

osmocom-bb.git branch fixeria/trx updated. osmocon_v0.0.0-2046-gc20f9bb5
by gitosis＠osmocom.org 05 Mar '18

05 Mar '18

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "The Open Source GSM Base Band stack". The branch, fixeria/trx has been updated via c20f9bb5cd2491169959922ce1ba249a34f589aa (commit) via 59d054906d1d5bd6f21fb6072ead0f76b6e5f27a (commit) via f97e3cd7882dff977973a2f29606c594f02c0b36 (commit) from c066787fd5e9696e4af0a43f7bd3fd9392de4931 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmocom-bb/commit/?id=c20f9bb5cd2491169959922ce1ba2… commit c20f9bb5cd2491169959922ce1ba249a34f589aa Author: Vadim Yanitskiy <axilirator(a)gmail.com> Date: Tue Mar 6 02:11:06 2018 +0700 fake_trx/ctrl_if.py: remove incorrect isdigit() check Previously, we used to check if all arguments of a command are numeric. This was done in a wrong way, so parsing a *valid* command with at least one negative argument could fail. Let's remove this check, allowing the command handlers to deal with argument types themselves. Change-Id: If31295274a09102c414b5a7aec5dd85d88b2e514 http://cgit.osmocom.org/osmocom-bb/commit/?id=59d054906d1d5bd6f21fb6072ead0… commit 59d054906d1d5bd6f21fb6072ead0f76b6e5f27a Author: Vadim Yanitskiy <axilirator(a)gmail.com> Date: Tue Mar 6 02:25:51 2018 +0700 fake_trx/ctrl_if.py: reduce code branch nasting Let's use the inverted condition to avoid additional code nasting. Change-Id: I8a62b39d9d9a597c612f9a576e98dc05e37cd25b http://cgit.osmocom.org/osmocom-bb/commit/?id=f97e3cd7882dff977973a2f29606c… commit f97e3cd7882dff977973a2f29606c594f02c0b36 Author: Vadim Yanitskiy <axilirator(a)gmail.com> Date: Tue Mar 6 02:22:24 2018 +0700 fake_trx/ctrl_if.py: remove forgotten debug print Change-Id: I4886828fb0f927c59c5eb1945a3c2873687de7b3 ----------------------------------------------------------------------- Summary of changes: src/target/fake_trx/ctrl_if.py | 24 ++++++++++-------------- 1 file changed, 10 insertions(+), 14 deletions(-) hooks/post-receive -- The Open Source GSM Base Band stack

1 0

osmo-trx.git branch rel-0.3.0 updated. 0.2.0-51-g7163715
by gitosis＠osmocom.org 05 Mar '18

05 Mar '18

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "OpenBTS' transceiver retro-fit". The branch, rel-0.3.0 has been updated via 71637150a148abab87c970d8f6b895b922e7eed4 (commit) via 2393964b7734523f8718c9113712b0d6aa1b8c0f (commit) via 9ee4df8760d132e408822f40d2e9d14447d1d9bf (commit) from c92dad32dd403d84617236e98db892d7d285cd35 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-trx/commit/?id=71637150a148abab87c970d8f6b895b… commit 71637150a148abab87c970d8f6b895b922e7eed4 Author: Pau Espin Pedrol <pespin(a)sysmocom.de> Date: Mon Mar 5 16:49:42 2018 +0100 Bump version: 0.2.0 → 0.3.0 Change-Id: I4dad76ed95dc585acfbd52d7eed4f2e6f9f5fd1f http://cgit.osmocom.org/osmo-trx/commit/?id=2393964b7734523f8718c9113712b0d… commit 2393964b7734523f8718c9113712b0d6aa1b8c0f Author: Alexander Couzens <lynxis(a)fe80.eu> Date: Sun Feb 25 20:20:28 2018 +0100 jenkins.sh: fix the download url if the qemu image wasn't setup Download the image from yesterday because linuxcontainers only contains the images of the last 3 days. Change-Id: I75e270b7255c1cd7fca1674111b0f19fc7bba74f (cherry picked from commit 28b8cc6283487bceace86fc9d7ee77bc9ba6123f) http://cgit.osmocom.org/osmo-trx/commit/?id=9ee4df8760d132e408822f40d2e9d14… commit 9ee4df8760d132e408822f40d2e9d14447d1d9bf Author: Alexander Huemer <alexander.huemer(a)xx.vu> Date: Tue Feb 27 22:35:37 2018 +0100 Fix USRP1 build with support for setting Rx/TxAntenna The USRP1 build was broken by commit 77ce99ac6720896f504a0581a5c57b2929a13cef. Commit 77ce99ac6720896f504a0581a5c57b2929a13cef broke the USRP1 build Change-Id: I28585947d5662cdd580a814cce54a5d9aa30eeb8 (cherry picked from commit 3f52f0e6c5d384f25ff8583648e5e4a4dc957530) ----------------------------------------------------------------------- Summary of changes: Transceiver52M/USRPDevice.h | 1 + contrib/jenkins.sh | 3 +- debian/changelog | 68 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 71 insertions(+), 1 deletion(-) hooks/post-receive -- OpenBTS' transceiver retro-fit

1 0

osmo-ci.git branch master updated. a45a34e9d05d6b11430b1c33810f795afd75fe58
by gitosis＠osmocom.org 05 Mar '18

05 Mar '18

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "CI scripts". The branch, master has been updated via a45a34e9d05d6b11430b1c33810f795afd75fe58 (commit) from 8bab2702b45543620c28c9d8bcaef04f9656f32a (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-ci/commit/?id=a45a34e9d05d6b11430b1c33810f795a… commit a45a34e9d05d6b11430b1c33810f795afd75fe58 Author: Alexander Couzens <lynxis(a)fe80.eu> Date: Tue Feb 27 15:54:29 2018 +0100 osmo-clean-workspace: fix force checkout of a subdirectory Instead of the subdirectory, the main repository was forced checked out. Change-Id: If23e89872edf48dc5b751b3c069faf585bd6a3ef ----------------------------------------------------------------------- Summary of changes: scripts/osmo-clean-workspace.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) hooks/post-receive -- CI scripts

1 0

osmo-bts.git branch master updated. 0.7.0-147-g4e959b2
by gitosis＠osmocom.org 05 Mar '18

05 Mar '18

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Osmocom BTS-side code (Abis, scheduling, ...)". The branch, master has been updated via 4e959b2aa06c98a8b8cad953d7baac1271f87bf0 (commit) via 1ef544ea246a73ef4404cb9622ca41fbe8e0b76b (commit) via 4f14804f8a023eff0ce2ac1712dd65383d1e0b96 (commit) via 0dfe13700911eb3755628f78a1a9653a34dd2510 (commit) via 53bdf4d949433a5d69ff2bdd2f74746e93195b88 (commit) via 10aa1cd6f6e9a10741965991ecba2b0939e50542 (commit) from 8a28868b29b4480f248d64728ebb08af8274fda9 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-bts/commit/?id=4e959b2aa06c98a8b8cad953d7baac1… commit 4e959b2aa06c98a8b8cad953d7baac1271f87bf0 Author: Philipp Maier <pmaier(a)sysmocom.de> Date: Thu Mar 1 15:46:59 2018 +0100 l1_tch: remove dead code the file l1_tch.c in the octphy spcific code has its root in the tch.c file of sysmobts. It contains some sysmobts specific ifdefs which enclose dead code. - Remove the sysmobts specif ifdefs and the dead code Change-Id: I33f3e0fd293ca8387fddf5ed20f642621e9680de http://cgit.osmocom.org/osmo-bts/commit/?id=1ef544ea246a73ef4404cb9622ca41f… commit 1ef544ea246a73ef4404cb9622ca41fbe8e0b76b Author: Vadim Yanitskiy <axilirator(a)gmail.com> Date: Mon Mar 5 20:56:20 2018 +0700 common/l1sap.c: limit the minimal ToA for RACH bursts In general, RACH bursts should not arrive with negative offset. Let's limit early signal arrival up to 2 symbols, otherwise it is most likely noise, interference or a ghost. TTCN-3 test case: Icccc88545ed3aabd6da28a40599a8a77d1de477d Change-Id: I662294fe3136cf7a259be13816a3e63f7db9a948 http://cgit.osmocom.org/osmo-bts/commit/?id=4f14804f8a023eff0ce2ac1712dd653… commit 4f14804f8a023eff0ce2ac1712dd65383d1e0b96 Author: Vadim Yanitskiy <axilirator(a)gmail.com> Date: Mon Mar 5 20:43:02 2018 +0700 common/l1sap.c: perform noise / ghost filtering for handover RACH For some reason, the noise / ghost filtering was performed for normal RACH requests, but not for handover RACH requests. There are also ghost RACH, interference and noise possible, so let's extend the filtering coverage. Change-Id: I94fc15835280d624780200dadc4418210bf565ff http://cgit.osmocom.org/osmo-bts/commit/?id=0dfe13700911eb3755628f78a1a9653… commit 0dfe13700911eb3755628f78a1a9653a34dd2510 Author: Vadim Yanitskiy <axilirator(a)gmail.com> Date: Mon Mar 5 20:29:47 2018 +0700 common/l1sap.c: clean up noise / ghost RACH filtering It makes sense to combine both existing BER (Bit Error Rate) and ToA (Timing of Arrival) checks into a separate funcition, so this code may be also used for handover RACH. Change-Id: I1ddda238d5212a88a3dd5c4fc5dfcfea018151bd http://cgit.osmocom.org/osmo-bts/commit/?id=53bdf4d949433a5d69ff2bdd2f74746… commit 53bdf4d949433a5d69ff2bdd2f74746e93195b88 Author: Vadim Yanitskiy <axilirator(a)gmail.com> Date: Mon Mar 5 20:03:06 2018 +0700 common/l1sap.c: increment valid RACH counter after all checks Previously, the number of RACH slots with valid non-handover RACH burst was incremented between both BER (Bit Error Rate) and ToA (Timing of Arrival) checks. So, if a RACH burst passed the BER check, but was dropped by ToA check, the counter of valid RACH requests could be increased anyway. Change-Id: I31594a8c5dce1f42226ced5b2dc8778152b3d829 http://cgit.osmocom.org/osmo-bts/commit/?id=10aa1cd6f6e9a10741965991ecba2b0… commit 10aa1cd6f6e9a10741965991ecba2b0939e50542 Author: Vadim Yanitskiy <axilirator(a)gmail.com> Date: Mon Mar 5 19:40:55 2018 +0700 common/l1sap.c: increase the BTS_CTR_RACH_DROP in RACH BER check The BTS_CTR_RACH_DROP counter is being increased in case if a RACH request is ignored due to exceeding ToA value, but remains untouched in case of exceeding BER (Bit Error Rate). Let's fix this. Change-Id: Ia02e781d6c47d9d8012a4c8846fe4b731aab74d7 ----------------------------------------------------------------------- Summary of changes: src/common/l1sap.c | 87 ++++++++++++++++++++++++++------------------ src/osmo-bts-octphy/l1_tch.c | 64 -------------------------------- 2 files changed, 52 insertions(+), 99 deletions(-) hooks/post-receive -- Osmocom BTS-side code (Abis, scheduling, ...)

1 0

libosmocore.git branch master updated. 0.10.2-199-gbf86d71f
by gitosis＠osmocom.org 05 Mar '18

05 Mar '18

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "An utility library for Open Source Mobile Communications". The branch, master has been updated via bf86d71f58f83f53e740d64e649884c91ee77c26 (commit) via 075299db7c01a4b068438341caca392fc6b03312 (commit) from 4d68fd0955010625cbaa7d19cb9f69b9f44900ab (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/libosmocore/commit/?id=bf86d71f58f83f53e740d64e6498… commit bf86d71f58f83f53e740d64e649884c91ee77c26 Author: Philipp Maier <pmaier(a)sysmocom.de> Date: Mon Mar 5 13:26:44 2018 +0100 features: define osmo_bts_*_feature() as static inline The functions osmo_bts_set_feature() and osmo_bts_has_feature() are currently defined as inline. Since inline is a hinting, the compiler might choose not to inline the function. This eventually leads to linker problems because the function is then defined multiple times. - use "static inline" instead of "inline" only. This patch is a follow up patch to Change Id 680acae725b2b8dda2f239ff20073306fdfb3f6e Change-Id: Iddd97415a17b06b69f69ddca2e2e296eb2f23a89 http://cgit.osmocom.org/libosmocore/commit/?id=075299db7c01a4b068438341caca… commit 075299db7c01a4b068438341caca392fc6b03312 Author: Pau Espin Pedrol <pespin(a)sysmocom.de> Date: Mon Mar 5 16:52:40 2018 +0100 osmo-release.sh: Set correct version when generating the changelog Otherwise, while updating osmo-trx 0.2.0->0.3.0, the version printed in the changelog by gbp dch is 0.2.1 Change-Id: I744adb23b4602e5e47f80a012286578d1e59de88 ----------------------------------------------------------------------- Summary of changes: include/osmocom/gsm/bts_features.h | 4 ++-- osmo-release.sh | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) hooks/post-receive -- An utility library for Open Source Mobile Communications

1 0

libosmocore.git branch neels/deb9-asan created. 0.10.2-198-g51cd7505
by gitosis＠osmocom.org 05 Mar '18

05 Mar '18

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "An utility library for Open Source Mobile Communications". The branch, neels/deb9-asan has been created at 51cd750520a2d5027b531f569372f28b838a3e6c (commit) - Log ----------------------------------------------------------------- http://cgit.osmocom.org/libosmocore/commit/?id=51cd750520a2d5027b531f569372… commit 51cd750520a2d5027b531f569372f28b838a3e6c Author: Neels Hofmeyr <neels(a)hofmeyr.de> Date: Mon Mar 5 15:46:38 2018 +0100 fix logging talloc ctx: add osmo_init_logging2() Deprecate osmo_init_logging() for the benefit of adding an explicit talloc context argument to new function osmo_init_logging2(). Before now, *all* of our code uses a NULL ctx for logging, which amounts to talloc "leaks" hit by address sanitizer builds on newer gcc (e.g. on debian 9). Passing a ctx to log_init() instead of hardcoded NULL allows fixing that. Change-Id: I216837780e9405fdaec8059c63d10699c695b360 ----------------------------------------------------------------------- hooks/post-receive -- An utility library for Open Source Mobile Communications

1 0

osmo-trx.git branch rel-0.3.0 created. 0.2.0-48-gc92dad3
by gitosis＠osmocom.org 05 Mar '18

05 Mar '18

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "OpenBTS' transceiver retro-fit". The branch, rel-0.3.0 has been created at c92dad32dd403d84617236e98db892d7d285cd35 (commit) - Log ----------------------------------------------------------------- ----------------------------------------------------------------------- hooks/post-receive -- OpenBTS' transceiver retro-fit

1 0

libosmocore.git branch master updated. 0.10.2-197-g4d68fd09
by gitosis＠osmocom.org 05 Mar '18

05 Mar '18

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "An utility library for Open Source Mobile Communications". The branch, master has been updated via 4d68fd0955010625cbaa7d19cb9f69b9f44900ab (commit) via 20f7d0ecb4d04bd20b132fadad50b3f914ed9fe0 (commit) from 680acae725b2b8dda2f239ff20073306fdfb3f6e (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/libosmocore/commit/?id=4d68fd0955010625cbaa7d19cb9f… commit 4d68fd0955010625cbaa7d19cb9f69b9f44900ab Author: Neels Hofmeyr <neels(a)hofmeyr.de> Date: Mon Mar 5 04:16:48 2018 +0100 gsm23003: add osmo_mcc_from_str() I found myself often using osmo_mnc_from_str() to also decode an MCC and be strict about it, but each time I felt the need to comment like "using osmo_mnc_from_str() also for MCC". Rather formalize this properly. Use a static inline function, no need to add more symbols to libosmo-gsm. Change-Id: I020a4f11791c61742a3d795f782805f7b7e8733e http://cgit.osmocom.org/libosmocore/commit/?id=20f7d0ecb4d04bd20b132fadad50… commit 20f7d0ecb4d04bd20b132fadad50b3f914ed9fe0 Author: Neels Hofmeyr <neels(a)hofmeyr.de> Date: Mon Mar 5 04:19:21 2018 +0100 fix osmo_mnc_from_str(): don't try to parse NULL In osmo_mnc_from_str() do not try to return some values even if the validation fails; hence don't try to decode a NULL pointer. That whole idea was half-baked and a can of worms to begin with. Change-Id: Ibaaa128ac60b941a015a31134eb52aef56bc6e22 ----------------------------------------------------------------------- Summary of changes: include/osmocom/gsm/gsm23003.h | 11 +++++++++++ src/gsm/gsm23003.c | 14 ++++++-------- tests/gsm23003/gsm23003_test.c | 16 ++++++++-------- tests/gsm23003/gsm23003_test.ok | 14 +++++++------- 4 files changed, 32 insertions(+), 23 deletions(-) hooks/post-receive -- An utility library for Open Source Mobile Communications

1 0

osmo-bts.git branch master updated. 0.7.0-141-g8a28868
by gitosis＠osmocom.org 05 Mar '18

05 Mar '18

1 0

← Newer
1
...
9
10
11
12
13
14
15
...
795
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

osmocom-commitlog