osmocom-commitlog

osmocom-commitlog@lists.osmocom.org

7948 discussions

osmo-gsm-manuals.git branch neels/osmo-hlr updated. 68a9801c88b20f717cee3ccab29d57ec07be91d5
by gitosis＠osmocom.org 19 Oct '17

19 Oct '17

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Manuals for Osmocom GSM components". The branch, neels/osmo-hlr has been updated discards 827c6ffa14425a190c326adcd68469da52fa785b (commit) via 68a9801c88b20f717cee3ccab29d57ec07be91d5 (commit) via 644bcae369f481b426553050cb31a73ce9f76255 (commit) via f2252db1336acf5a233d0eb75ca03c225412b0da (commit) via 75b442450ac6c296c058f51c9bb77733501f3871 (commit) via 8d607a7900fc5f0f19bf04f592310d5457d786f8 (commit) via 4538d2d67f5b8835cc224aaf312a136b6c0dc01e (commit) This update added new revisions after undoing existing revisions. That is to say, the old revision is not a strict subset of the new revision. This situation occurs when you --force push a change and generate a repository containing something like this: * -- * -- B -- O -- O -- O (827c6ffa14425a190c326adcd68469da52fa785b) \ N -- N -- N (68a9801c88b20f717cee3ccab29d57ec07be91d5) When this happens we assume that you've already had alert emails for all of the O revisions, and so we here report only the revisions in the N branch from the common base, B. Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-gsm-manuals/commit/?id=68a9801c88b20f717cee3cc… commit 68a9801c88b20f717cee3ccab29d57ec07be91d5 Author: Neels Hofmeyr <neels(a)hofmeyr.de> Date: Thu Oct 19 05:11:57 2017 +0200 refactor Makefile build rules, don't use the FORCE The initial goal was to make sure we don't have overall FORCE rules causing unnecessary rebuilds -- annoying while writing documentation. As I looked through possible dependencies, I finally understood what's going on here. Remove code dup and nicely sort which belongs where in build/Makefile.*.inc. In each, describe in a top comment how to use it, and also unify how they are used: - Rename Makefile.inc to Makefile.docbook.inc and refactor - Add Makefile.vty-reference.inc - Add Makefile.common.inc Make sure that we accurately pick up all dependencies. Drop use of the macro called 'command', that silenced the actual command lines invoked and replaced them with short strings: it obscures what is actually going on and makes the Makefiles hard to read and understand. Each manual's makefile is greatly reduced to few definitions and a Makefile include, e.g. one for asciidoc, one for VTY reference. Move common/bsc_vty_additions.xml to OsmoBSC/vty/libbsc_vty_additions.xml, link from OsmoNITB. It applies only to OsmoBSC and OsmoNITB. Add a script that combines a VTY reference file with *all* additions files found in a manual's vty/ dir. Call this from Makefile.vty-reference.inc. Change-Id: I9758e04162a480e28c7dc83475b514cf7fd25ec0 http://cgit.osmocom.org/osmo-gsm-manuals/commit/?id=644bcae369f481b42655305… commit 644bcae369f481b426553050cb31a73ce9f76255 Author: Neels Hofmeyr <neels(a)hofmeyr.de> Date: Mon Sep 25 16:37:34 2017 +0200 add OsmoHLR manual, OsmoHLR VTY reference Change-Id: Ieb6a362a26a7e65199f68f5cd32d9b6b0e5d0fbf http://cgit.osmocom.org/osmo-gsm-manuals/commit/?id=f2252db1336acf5a233d0eb… commit f2252db1336acf5a233d0eb75ca03c225412b0da Author: Neels Hofmeyr <neels(a)hofmeyr.de> Date: Wed Oct 18 00:12:11 2017 +0200 common/vty: minor wording tweaks and typo fixes Change-Id: I5eb1ea0d3de883ff5e9742f77e7ef4be0482852d http://cgit.osmocom.org/osmo-gsm-manuals/commit/?id=75b442450ac6c296c058f51… commit 75b442450ac6c296c058f51c9bb77733501f3871 Author: Neels Hofmeyr <neels(a)hofmeyr.de> Date: Tue Oct 17 23:47:54 2017 +0200 common/vty: explain difference between telnet and config file - Mention that the CONFIG node is used to parse config files. - Mention that it is not well defined whether CONFIG node items have immediate effect. - Add a 'telnet' here and there to clarify. Change-Id: I882346c69f12c67d0e41d563c99d4de4efd8b8f6 http://cgit.osmocom.org/osmo-gsm-manuals/commit/?id=8d607a7900fc5f0f19bf04f… commit 8d607a7900fc5f0f19bf04f592310d5457d786f8 Author: Neels Hofmeyr <neels(a)hofmeyr.de> Date: Tue Oct 17 23:47:54 2017 +0200 common/vty: "programs should not use the telnet VTY" Change-Id: Ic7e8c3663a2bfaf8dcb5752bf55ccb822b111c31 http://cgit.osmocom.org/osmo-gsm-manuals/commit/?id=4538d2d67f5b8835cc224aa… commit 4538d2d67f5b8835cc224aaf312a136b6c0dc01e Author: Neels Hofmeyr <neels(a)hofmeyr.de> Date: Tue Oct 17 23:47:54 2017 +0200 common/vty: fix: CONFIG entered from ENABLE, not VIEW node Change-Id: I892081f9452f8923441913f978a3be542a3c53d0 ----------------------------------------------------------------------- Summary of changes: Makefile | 1 + OsmoBSC/Makefile | 55 ++-------- .../vty/libbsc_vty_additions.xml | 0 OsmoBTS/Makefile | 52 ++-------- OsmoGGSN/Makefile | 41 ++------ OsmoGSMTester/Makefile | 13 +-- OsmoHLR/Makefile | 44 ++------ OsmoHLR/chapters/running.adoc | 8 +- OsmoHLR/osmohlr-usermanual.adoc | 5 +- OsmoMGCP/Makefile | 33 +----- OsmoMSC/Makefile | 44 ++------ OsmoNAT/Makefile | 33 +----- OsmoNITB/Makefile | 46 ++------- OsmoNITB/vty/bsc_vty_additions.xml | 1 + OsmoPCU/Makefile | 44 +------- OsmoSGSN/Makefile | 45 ++------- build/Makefile.asciidoc.inc | 35 +++++-- build/Makefile.common.inc | 14 +++ build/Makefile.docbook.inc | 35 +++++++ build/Makefile.inc | 47 --------- build/Makefile.vty-reference.inc | 42 ++++++++ build/vty_reference_combine.sh | 25 +++++ common/chapters/vty.adoc | 112 ++++++++++++--------- 23 files changed, 281 insertions(+), 494 deletions(-) rename common/bsc_vty_additions.xml => OsmoBSC/vty/libbsc_vty_additions.xml (100%) create mode 120000 OsmoNITB/vty/bsc_vty_additions.xml create mode 100644 build/Makefile.common.inc create mode 100644 build/Makefile.docbook.inc delete mode 100644 build/Makefile.inc create mode 100644 build/Makefile.vty-reference.inc create mode 100755 build/vty_reference_combine.sh hooks/post-receive -- Manuals for Osmocom GSM components

1 0

op25.git branch master updated. 7ae554682a8c78796211fe05f0da4ec52c43a45b
by gitosis＠osmocom.org 19 Oct '17

19 Oct '17

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Software-defined analyzer for APCO P25". The branch, master has been updated via 7ae554682a8c78796211fe05f0da4ec52c43a45b (commit) via aa7a4be3490f83a9900ddc9aad5bcbca16e9ccbf (commit) via 87f546a9477653dc974eda2e98e6c38f141252a0 (commit) via e7d67538ae7f0a38ce530a42dea04ba45a9bf4b4 (commit) via 77b21b5e32d094cbe5aca07f84a559af43398704 (commit) via e31207cf8839982fc1a68e084d0d8fd2fb25e45f (commit) via 6ddc299edfe74fbba04e805a2e5e73c91ac8de12 (commit) via c412a8fd5bbec773e6fb5506f6af6b10c5471139 (commit) via bbe9506b469e9f6d4bb6f4b1dedf8599af5ac7b0 (commit) via bb38456f9cae69a88537765b8dc17669046408e3 (commit) via c8cf7a7da869a3323f74640240c219cc09efee83 (commit) via a9522ee636638cbb4b460e8d2e2323cdbdf447f4 (commit) via 15f0acfa1794533230f42ee2ec315ce8a610a6fa (commit) via 37f2c3bbfc09bca304236b98bec1e85ea3e15c18 (commit) via 68476ab6c1001702192f93f2abcfed11fdb47bd2 (commit) via 20743ddc60d5213a5fba60241e5a0c12e5a16b78 (commit) via a3f4963deac56125953a4efbc4b26e510f4e0520 (commit) via 04b16056dffbe2871e4d0b870d118029acb757da (commit) via 93b19531ee0942d4a589bb3e7345e28f1f578759 (commit) via 187f5d180cfd89edc38fa0e7df484e811dbd96c3 (commit) via 2f3eb8908a789f88557accdc8036212b4b3de197 (commit) via 99926acda54c1bd48f45b90ab474c47d3b0b0595 (commit) via 8f7932224451db4e8aeee5291e78c2ffb69cb353 (commit) via 8c98a8be5215db0a6e4c7e23059ef76aff8d55ba (commit) via b5ec34562b6a7d8b5920295b2923e8a4ed3e4df6 (commit) via d0eacef338a4e1454e7f8ee7e408a01b66492248 (commit) via e9911c5df8413dd5c9ddd4c7d37db4259d2a989b (commit) via 45794418aeb9283f2e237084fdedf30209457b4c (commit) via e6deba2cd56d8261e779d939054e260404684f5a (commit) via 59a78e36711e24a20f40800e63eaf51fcd236bcf (commit) via 10aaadf1cd4eef73b2d5b65afddd7cea7d580f8e (commit) from bcef5dfc295a76aa219709c3492285b81652a2dd (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- ----------------------------------------------------------------------- Summary of changes: install.sh | 22 + op25/gr-op25_repeater/apps/README | 163 ++ op25/gr-op25_repeater/apps/gr_gnuplot.py | 241 ++ op25/gr-op25_repeater/apps/p25_decoder.py | 13 +- op25/gr-op25_repeater/apps/p25_demodulator.py | 3 + op25/gr-op25_repeater/apps/rx.py | 669 +++++ op25/gr-op25_repeater/apps/scope.py | 2779 +------------------- op25/gr-op25_repeater/apps/sockaudio.py | 309 +++ op25/gr-op25_repeater/apps/terminal.py | 187 ++ op25/gr-op25_repeater/apps/trunking.py | 104 +- op25/gr-op25_repeater/apps/tx/doc.html | 37 +- op25/gr-op25_repeater/apps/tx/dv_tx.py | 86 +- op25/gr-op25_repeater/apps/tx/multi_tx.py | 199 ++ op25/gr-op25_repeater/apps/tx/op25_c4fm_mod.py | 10 +- .../include/op25_repeater/ambe_encoder_sb.h | 1 + .../include/op25_repeater/dstar_tx_sb.h | 1 + .../include/op25_repeater/vocoder.h | 1 + .../include/op25_repeater/ysf_tx_sb.h | 1 + op25/gr-op25_repeater/lib/ambe.c | 10 +- op25/gr-op25_repeater/lib/ambe_encoder.cc | 17 +- op25/gr-op25_repeater/lib/ambe_encoder.h | 1 + op25/gr-op25_repeater/lib/ambe_encoder_sb_impl.cc | 5 + op25/gr-op25_repeater/lib/ambe_encoder_sb_impl.h | 1 + op25/gr-op25_repeater/lib/dstar_tx_sb_impl.cc | 5 +- op25/gr-op25_repeater/lib/dstar_tx_sb_impl.h | 1 + .../gr-op25_repeater/lib/gardner_costas_cc_impl.cc | 2 +- op25/gr-op25_repeater/lib/imbe_vocoder/aux_sub.cc | 4 +- op25/gr-op25_repeater/lib/imbe_vocoder/aux_sub.h | 2 +- .../lib/imbe_vocoder/imbe_vocoder.cc | 10 - .../lib/imbe_vocoder/imbe_vocoder.h | 3 +- .../gr-op25_repeater/lib/imbe_vocoder/pitch_est.cc | 2 +- .../gr-op25_repeater/lib/imbe_vocoder/sa_encode.cc | 2 +- op25/gr-op25_repeater/lib/imbe_vocoder/tbls.cc | 4 +- op25/gr-op25_repeater/lib/imbe_vocoder/tbls.h | 4 +- .../lib/p25_frame_assembler_impl.cc | 7 +- op25/gr-op25_repeater/lib/p25p1_fdma.cc | 21 +- op25/gr-op25_repeater/lib/p25p1_fdma.h | 1 + op25/gr-op25_repeater/lib/p25p1_voice_encode.cc | 4 + op25/gr-op25_repeater/lib/p25p1_voice_encode.h | 2 +- op25/gr-op25_repeater/lib/p25p2_tdma.cc | 58 +- op25/gr-op25_repeater/lib/p25p2_tdma.h | 12 +- op25/gr-op25_repeater/lib/p25p2_vf.cc | 1206 ++++----- op25/gr-op25_repeater/lib/p25p2_vf.h | 1 + op25/gr-op25_repeater/lib/vocoder_impl.cc | 5 + op25/gr-op25_repeater/lib/vocoder_impl.h | 1 + op25/gr-op25_repeater/lib/ysf_tx_sb_impl.cc | 8 + op25/gr-op25_repeater/lib/ysf_tx_sb_impl.h | 1 + 47 files changed, 2688 insertions(+), 3538 deletions(-) create mode 100755 install.sh create mode 100644 op25/gr-op25_repeater/apps/README create mode 100644 op25/gr-op25_repeater/apps/gr_gnuplot.py create mode 100755 op25/gr-op25_repeater/apps/rx.py create mode 100755 op25/gr-op25_repeater/apps/sockaudio.py create mode 100644 op25/gr-op25_repeater/apps/terminal.py mode change 100644 => 100755 op25/gr-op25_repeater/apps/tx/dv_tx.py create mode 100755 op25/gr-op25_repeater/apps/tx/multi_tx.py hooks/post-receive -- Software-defined analyzer for APCO P25

1 0

op25.git branch max updated. 7ae554682a8c78796211fe05f0da4ec52c43a45b
by gitosis＠osmocom.org 19 Oct '17

19 Oct '17

1 0

op25.git branch max updated. e7d67538ae7f0a38ce530a42dea04ba45a9bf4b4
by gitosis＠osmocom.org 18 Oct '17

18 Oct '17

1 0

osmo-ggsn.git branch master updated. 1.0.0-65-g859f9b0
by gitosis＠osmocom.org 18 Oct '17

18 Oct '17

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "The OpenGGSN project". The branch, master has been updated via 859f9b0752419d43928d465bc96a87238c6d7940 (commit) via a037e5908a84e8f438f8faef662f6bfcec305b16 (commit) via 2e7b9ff891a0d4c84a4be3fffbac1b9502fe267c (commit) via 361cb9e910e77f657ad39e0be4684b8028711a0c (commit) from 5bacb59a6c314001a053977acb4aece4695b356a (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-ggsn/commit/?id=859f9b0752419d43928d465bc96a87… commit 859f9b0752419d43928d465bc96a87238c6d7940 Author: Pau Espin Pedrol <pespin(a)sysmocom.de> Date: Mon Oct 16 14:52:25 2017 +0200 ippool: Implement and use blacklist instead of blindly using IPPOOL_NOGATEWAY Commit dda21ed7d4a897c9284c69175d0da598598eae40 modified previous calls to ippool_new() removing the pass of flags to avoid allocating certain problematic IPs from the pool to MS, such as the network, gateway and broadcast IPs. Today I did some unsucessful tests with osmo-ggsn with a pool "ip prefix dynamic 176.16.222.0/24", and thus IP 176.16.222.0 was being assigned to the MS. De-capsulated DNS packets were received in the tun interface, but the Linux system in there was unable to correctly forward the packets to the gateway interface connected to the Internet. However, adding a second MS which got 176.16.222.1 had its packets forwarded correctly. However, previous implementation relies on flag IPPOOL_NOGATEWAY flag to blindly blacklist first IP after the network ip (ie, .0 and .1 are removed), which limits the IP reserved for the tun device to be .1. If a different IP in the range is assigned, it may cause issues. As a result, a blacklist is introduced in this commit to dynamically fetch the tun IP address and exlucde it from the pool of available IPs. Change-Id: I8e91f7280d60490c858a769dd578c1c8e54e9243 http://cgit.osmocom.org/osmo-ggsn/commit/?id=a037e5908a84e8f438f8faef662f6b… commit a037e5908a84e8f438f8faef662f6bfcec305b16 Author: Pau Espin Pedrol <pespin(a)sysmocom.de> Date: Mon Oct 16 14:41:37 2017 +0200 tun: Convert tun_ipv6_linklocal_get to be more generic Add support for IPv4 and IPv6 global IPs. Also return the prefix length of the IP address by using a in46_prefix. Change-Id: I277af191dc611b6bbcb83479f4ae338083740322 http://cgit.osmocom.org/osmo-ggsn/commit/?id=2e7b9ff891a0d4c84a4be3fffbac1b… commit 2e7b9ff891a0d4c84a4be3fffbac1b9502fe267c Author: Pau Espin Pedrol <pespin(a)sysmocom.de> Date: Mon Oct 16 14:27:32 2017 +0200 lib/in46a: Introduce in46a_netmasklen API Change-Id: I06e3e038afd8f7afaec2a3fa67b1616500c8db80 http://cgit.osmocom.org/osmo-ggsn/commit/?id=361cb9e910e77f657ad39e0be4684b… commit 361cb9e910e77f657ad39e0be4684b8028711a0c Author: Pau Espin Pedrol <pespin(a)sysmocom.de> Date: Fri Oct 13 11:56:16 2017 +0200 lib/ippool: Fix listsize calculated 1 elem too small Take the chance this commit is changing test output to also remove use of IPPOOL_NOGATEWAY which is going to be removed soon, and instead test IPPOOL_NOBROADCAST. Change-Id: I95c24bc690490155bec9e3933d678e4668d7745f ----------------------------------------------------------------------- Summary of changes: ggsn/ggsn.c | 58 +++++++++- lib/in46_addr.c | 58 ++++++++++ lib/in46_addr.h | 1 + lib/ippool.c | 38 ++++--- lib/ippool.h | 4 +- lib/tun.c | 65 ++++++++--- lib/tun.h | 13 ++- tests/lib/in46a_test.c | 59 ++++++++++ tests/lib/in46a_test.ok | 2 + tests/lib/ippool_test.c | 45 +++++--- tests/lib/ippool_test.err | 2 + tests/lib/ippool_test.ok | 269 +++++++++++++++++++++++++++++++++++++++++++++- 12 files changed, 562 insertions(+), 52 deletions(-) hooks/post-receive -- The OpenGGSN project

1 0

libosmo-sccp.git branch master updated. 0.0.6.3-313-g793cf8a
by gitosis＠osmocom.org 18 Oct '17

18 Oct '17

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "SCCP Library". The branch, master has been updated via 793cf8a259540bbb063bf0eb4cfde3e26d3ccfd3 (commit) from d966b0fd060d72e07a6da548da5989abb5789a6f (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/libosmo-sccp/commit/?id=793cf8a259540bbb063bf0eb4cf… commit 793cf8a259540bbb063bf0eb4cfde3e26d3ccfd3 Author: Max <msuraev(a)sysmocom.de> Date: Thu Oct 12 16:29:14 2017 +0200 Add doxygen docs Make sure doxygen generates library documentation by default (can be disabled at compile time). Change-Id: I2bf7438bcdde19dc88b9bc14c8ad9c8f49099f8a Related: OS#2572 ----------------------------------------------------------------------- Summary of changes: .gitignore | 1 + Doxyfile.in | 1716 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Makefile.am | 27 + configure.ac | 10 + debian/control | 1 + 5 files changed, 1755 insertions(+) create mode 100644 Doxyfile.in hooks/post-receive -- SCCP Library

1 0

op25.git branch max updated. 6ddc299edfe74fbba04e805a2e5e73c91ac8de12
by gitosis＠osmocom.org 18 Oct '17

18 Oct '17

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Software-defined analyzer for APCO P25". The branch, max has been updated via 6ddc299edfe74fbba04e805a2e5e73c91ac8de12 (commit) from c412a8fd5bbec773e6fb5506f6af6b10c5471139 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/op25/commit/?id=6ddc299edfe74fbba04e805a2e5e73c91ac… commit 6ddc299edfe74fbba04e805a2e5e73c91ac8de12 Author: Max <ikj1234i(a)yahoo.com> Date: Tue Oct 17 22:17:44 2017 -0400 update doc.html ----------------------------------------------------------------------- Summary of changes: op25/gr-op25_repeater/apps/tx/doc.html | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) hooks/post-receive -- Software-defined analyzer for APCO P25

1 0

op25.git branch max updated. c412a8fd5bbec773e6fb5506f6af6b10c5471139
by gitosis＠osmocom.org 18 Oct '17

18 Oct '17

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Software-defined analyzer for APCO P25". The branch, max has been updated via c412a8fd5bbec773e6fb5506f6af6b10c5471139 (commit) from bbe9506b469e9f6d4bb6f4b1dedf8599af5ac7b0 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/op25/commit/?id=c412a8fd5bbec773e6fb5506f6af6b10c54… commit c412a8fd5bbec773e6fb5506f6af6b10c5471139 Author: Max <ikj1234i(a)yahoo.com> Date: Tue Oct 17 22:15:09 2017 -0400 update doc.html ----------------------------------------------------------------------- Summary of changes: op25/gr-op25_repeater/apps/tx/doc.html | 6 ++++++ 1 file changed, 6 insertions(+) hooks/post-receive -- Software-defined analyzer for APCO P25

1 0

osmo-python-tests.git branch neels/interact_vty_ctrl updated. 066a95dec529c3fc5c77e186a0f25ca613e74ff5
by gitosis＠osmocom.org 18 Oct '17

18 Oct '17

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "UNNAMED PROJECT". The branch, neels/interact_vty_ctrl has been updated discards 9188c69f093f00f47753a028a656df0954ca0fc6 (commit) discards d9a4e07fb33c992997e88b3ddb6157af15210c86 (commit) via 066a95dec529c3fc5c77e186a0f25ca613e74ff5 (commit) via 6562c085c42f3fa669a3c8a71c99cda7a108a3ad (commit) This update added new revisions after undoing existing revisions. That is to say, the old revision is not a strict subset of the new revision. This situation occurs when you --force push a change and generate a repository containing something like this: * -- * -- B -- O -- O -- O (9188c69f093f00f47753a028a656df0954ca0fc6) \ N -- N -- N (066a95dec529c3fc5c77e186a0f25ca613e74ff5) When this happens we assume that you've already had alert emails for all of the O revisions, and so we here report only the revisions in the N branch from the common base, B. Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/python/osmo-python-tests/commit/?id=066a95dec529c3f… commit 066a95dec529c3fc5c77e186a0f25ca613e74ff5 Author: Neels Hofmeyr <neels(a)hofmeyr.de> Date: Wed Oct 18 03:53:06 2017 +0200 cosmetic: cmdline arg doc tweaks, comment Change-Id: I60dc059879dfe15cd3415ce1ed068ded28ff084e http://cgit.osmocom.org/python/osmo-python-tests/commit/?id=6562c085c42f3fa… commit 6562c085c42f3fa669a3c8a71c99cda7a108a3ad Author: Neels Hofmeyr <neels(a)hofmeyr.de> Date: Wed Oct 18 03:20:04 2017 +0200 osmo_verify_*: clarify naming to osmo_interact_* Have common implementations in one place, and expose distinct command line argument signatures to obtain the separate tasks as separate scripts. osmo_interact_common.py implements the parts common to all VTY and CTRL interactions. osmo_interact_vty.py and osmo_interact_ctrl.py implement commands I/O but only expose command line args to directly pipe commands and responses. osmo_verify_transcript_vty.py and osmo_verify_transcript_ctrl.py act as before, now implemented by importing osmo_interact_{vty,ctrl}.py, only exposing the verifification command line arguments. Change-Id: Ie0cbd5db85ebebc893df638a07f5568632563dc9 ----------------------------------------------------------------------- Summary of changes: osmopy/osmo_interact_vty.py | 1 + 1 file changed, 1 insertion(+) hooks/post-receive -- UNNAMED PROJECT

1 0

osmo-python-tests.git branch neels/interact_vty_ctrl created. 9188c69f093f00f47753a028a656df0954ca0fc6
by gitosis＠osmocom.org 18 Oct '17

18 Oct '17

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "UNNAMED PROJECT". The branch, neels/interact_vty_ctrl has been created at 9188c69f093f00f47753a028a656df0954ca0fc6 (commit) - Log ----------------------------------------------------------------- http://cgit.osmocom.org/python/osmo-python-tests/commit/?id=9188c69f093f00f… commit 9188c69f093f00f47753a028a656df0954ca0fc6 Author: Neels Hofmeyr <neels(a)hofmeyr.de> Date: Wed Oct 18 03:53:06 2017 +0200 cosmetic: cmdline arg doc tweaks Change-Id: I60dc059879dfe15cd3415ce1ed068ded28ff084e http://cgit.osmocom.org/python/osmo-python-tests/commit/?id=d9a4e07fb33c992… commit d9a4e07fb33c992997e88b3ddb6157af15210c86 Author: Neels Hofmeyr <neels(a)hofmeyr.de> Date: Wed Oct 18 03:20:04 2017 +0200 osmo_verify_*: clarify naming to osmo_interact_* We now have common implementations, and separately named scripts with distinct command line argument signatures to obtain the separate tasks. osmo_interact_common.py implements the parts common to all VTY and CTRL interactions. osmo_interact_vty.py and osmo_interact_ctrl.py implement commands I/O but only expose command line args to directly pipe commands and responses. osmo_verify_transcript_vty.py and osmo_verify_transcript_ctrl.py act as before, now implemented by importing osmo_interact_{vty,ctrl}.py, only exposing the verifification command line arguments. Change-Id: Ie0cbd5db85ebebc893df638a07f5568632563dc9 http://cgit.osmocom.org/python/osmo-python-tests/commit/?id=08d645b01db09c1… commit 08d645b01db09c14520a6000ce4833dbb74c0c88 Author: Neels Hofmeyr <neels(a)hofmeyr.de> Date: Wed Oct 18 02:45:10 2017 +0200 osmo_verify_transcript: allow running/piping commands directly To retrieve the VTY reference XML from 'show online-help', which we need for the osmo-gsm-manuals, it is useful to directly print the output of a single VTY command. I have also always wanted to be able to just type CTRL commands and get their results. Add --command and --output arguments to run specific commands and pipe to stdout instead of verifying a transcript file, in a way that works generically for both VTY and CTRL interface. The scripts' names are now a bit of a misnomer, to be tweaked separately. Change-Id: I2c31a87fa255092bcd06da239651cc50174c8faa http://cgit.osmocom.org/python/osmo-python-tests/commit/?id=32cbce1a163f4c5… commit 32cbce1a163f4c5e084bbb5f02e5312cd78575c1 Author: Neels Hofmeyr <neels(a)hofmeyr.de> Date: Wed Oct 18 03:39:22 2017 +0200 osmo_verify_transcript_vty: automatically obtain the prompt string If -n is omitted, retrieve the proper prompt name from the initial VTY opening prompt. Change-Id: Id5d953156023fcbfc8867c1c3634d787d0b3ac57 http://cgit.osmocom.org/python/osmo-python-tests/commit/?id=7b5203f6aa2eb23… commit 7b5203f6aa2eb236019470029f0891bfc7998eff Author: Neels Hofmeyr <neels(a)hofmeyr.de> Date: Wed Oct 18 02:09:08 2017 +0200 osmo_verify_transcript: add error handling for missing port Change-Id: I1627c36cfb627e7f3a9b4d9f087bf10875ae0690 ----------------------------------------------------------------------- hooks/post-receive -- UNNAMED PROJECT

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

osmocom-commitlog