osmocom-commitlog

osmocom-commitlog@lists.osmocom.org

7948 discussions

osmo-ci.git branch master updated. 63509531701138f9454f9c3505ceb435b6cf9e06

by gitosis＠osmocom.org

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "CI scripts". The branch, master has been updated via 63509531701138f9454f9c3505ceb435b6cf9e06 (commit) from f9c1cb2777cfc2241a51749ea126dfd1f02276be (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-ci/commit/?id=63509531701138f9454f9c3505ceb435… commit 63509531701138f9454f9c3505ceb435b6cf9e06 Author: Neels Hofmeyr <neels(a)hofmeyr.de> Date: Sat Oct 28 04:19:23 2017 +0200 osmo-deps.sh: make sure to not clean all deps when inside a dep dir Make sure osmo-deps.sh passes no $deps in to osmo-clean-workspace.sh. In most builds, $deps is a relative path, and when within a dir that contains no such subir, calling osmo-clean-workspace.sh has no effect. However, in some, $deps is passed in as absolute path, so when within a deps/... subdir in osmo-deps.sh, the script would still find the abspath and clean out all deps subdirs; for example in osmo-bts. Change-Id: I431d20aedefc708645a1f1862334cffaef20b928 ----------------------------------------------------------------------- Summary of changes: scripts/osmo-deps.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) hooks/post-receive -- CI scripts

7 years, 8 months

osmo-ci.git branch master updated. f9c1cb2777cfc2241a51749ea126dfd1f02276be

by gitosis＠osmocom.org

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "CI scripts". The branch, master has been updated via f9c1cb2777cfc2241a51749ea126dfd1f02276be (commit) via 7c5e34cba004837189c92ca015856a06288872e0 (commit) via f42a1cfa501d67a0fa96def4a1ff352c2b214620 (commit) from 26f9d8768b644ae0dd20b0e671b949a340c954e4 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-ci/commit/?id=f9c1cb2777cfc2241a51749ea126dfd1… commit f9c1cb2777cfc2241a51749ea126dfd1f02276be Author: Neels Hofmeyr <neels(a)hofmeyr.de> Date: Fri Oct 27 22:32:45 2017 +0200 scripts: use 'git checkout -f' instead of 'reset --hard' 'checkout -f' more accurately does what is intended. 'reset' changes the current branch to some hash, 'checkout -f' force-checkouts another branch. Change-Id: Ic6279ebaf8160bceb3fa2ab40eff0b888ecd5009 http://cgit.osmocom.org/osmo-ci/commit/?id=7c5e34cba004837189c92ca015856a06… commit 7c5e34cba004837189c92ca015856a06288872e0 Author: Neels Hofmeyr <neels(a)hofmeyr.de> Date: Fri Oct 27 22:31:14 2017 +0200 osmo-build-dep: offload branch checkout to osmo-deps.sh In osmo-deps.sh, add second arg $branch, and also name the first one (i.e. $project). Use the passed branch or 'origin/master' by default. In osmo-build-dep.sh, it's not necessary to do a second 'git rev-parse HEAD', osmo-deps.sh already does it. Change-Id: I598c41a12352acea6e49a321ad2f665f6ea07a44 http://cgit.osmocom.org/osmo-ci/commit/?id=f42a1cfa501d67a0fa96def4a1ff352c… commit f42a1cfa501d67a0fa96def4a1ff352c2b214620 Author: Neels Hofmeyr <neels(a)hofmeyr.de> Date: Fri Oct 27 22:10:17 2017 +0200 add osmo-clean-workspace.sh, use in osmo-deps.sh So far, each jenkins job does its own cleanup, more or less well. Also, jenkins git config offers the 'Clean before checkout' option, which seems to fail when there are non-writable leftovers from a failed 'make distcheck'. Furthermore, our jenkins build slaves have unused compiled binaries piling up by the gigabytes: each matrix build x each parallel build and each compiled dependency therein builds .o, .a, .so and executables plus installs them to a local prefix, and just leaves them sitting around to rot until the job runs again. Instead, we want to clean them out when building is done. All of this calls for a unified cleanup script that knows how to clean a workspace properly, to run once before and once after each jenkins build. Here it is. Use that function in osmo-deps.sh instead of duplicating cleanup steps. Change-Id: I2409b2928b4d7ebbd6c005097d4ad7337307dd93 ----------------------------------------------------------------------- Summary of changes: scripts/osmo-build-dep.sh | 7 +------ scripts/osmo-clean-workspace.sh | 42 +++++++++++++++++++++++++++++++++++++++++ scripts/osmo-deps.sh | 16 ++++++++++++---- scripts/osmo-layer1-headers.sh | 2 +- 4 files changed, 56 insertions(+), 11 deletions(-) create mode 100755 scripts/osmo-clean-workspace.sh hooks/post-receive -- CI scripts

7 years, 8 months

osmo-iuh.git annotated tag 0.2.0 created. 0.2.0

by gitosis＠osmocom.org

7 years, 8 months

osmo-iuh.git branch master updated. 0.1.0-9-gcc1afdf

by gitosis＠osmocom.org

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Osmocom code for Iuh interface". The branch, master has been updated via cc1afdfb7e20b4b3a87b3c64382181b09b74e1c3 (commit) via 257771ca6547c78981b00d1cdabbee0e59f66c16 (commit) from 961674aa096758784bd57b8ab6d2118ebdee3587 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-iuh/commit/?id=cc1afdfb7e20b4b3a87b3c64382181b… commit cc1afdfb7e20b4b3a87b3c64382181b09b74e1c3 Author: Harald Welte <laforge(a)gnumonks.org> Date: Fri Oct 27 22:20:16 2017 +0200 Tag/Release 0.2.0 + Update LIBVERSION + Debian packaging Change-Id: I4fe653fdde6acda59485c73cee63bfc5326edf28 http://cgit.osmocom.org/osmo-iuh/commit/?id=257771ca6547c78981b00d1cdabbee0… commit 257771ca6547c78981b00d1cdabbee0e59f66c16 Author: Harald Welte <laforge(a)gnumonks.org> Date: Fri Oct 27 22:26:39 2017 +0200 debian: depend on libosmo-sigtran-dev, not libosmo-sccp-dev We recently fixed package naming / sub-packagign in the libosmo-sccp git repository, so now we need to depend on the proper package name. Change-Id: I6e4f8fa96e5f39f988d6993ba3931cb7df70e905 ----------------------------------------------------------------------- Summary of changes: debian/changelog | 6 ++++++ debian/control | 8 ++++---- debian/{libosmo-ranap0.install => libosmo-ranap1.install} | 0 src/Makefile.am | 2 +- 4 files changed, 11 insertions(+), 5 deletions(-) rename debian/{libosmo-ranap0.install => libosmo-ranap1.install} (100%) hooks/post-receive -- Osmocom code for Iuh interface

7 years, 8 months

osmo-iuh.git branch master updated. 0.1.0-7-g961674a

by gitosis＠osmocom.org

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Osmocom code for Iuh interface". The branch, master has been updated via 961674aa096758784bd57b8ab6d2118ebdee3587 (commit) from 51640389935ddd785219acb4e3090309074d7705 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-iuh/commit/?id=961674aa096758784bd57b8ab6d2118… commit 961674aa096758784bd57b8ab6d2118ebdee3587 Author: Harald Welte <laforge(a)gnumonks.org> Date: Fri Oct 27 22:01:29 2017 +0200 update dependencies to latest libosmo-* releases Now that we have tagged releases that include the support needed in osmo-iuh, let's require them. Change-Id: I579ba94e8f0f700b598a2346c5020cce3b159f27 ----------------------------------------------------------------------- Summary of changes: configure.ac | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) hooks/post-receive -- Osmocom code for Iuh interface

7 years, 8 months

libasn1c.git branch master updated. a4d72b02e2380eadd0abd758bd9fb34b59f58d8a

by gitosis＠osmocom.org

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "asn1c runtime code as shared library". The branch, master has been updated via a4d72b02e2380eadd0abd758bd9fb34b59f58d8a (commit) via 8d9147a7645458f7548f972fef1f5f2ac10cccce (commit) via b7c145daa49bfbd36263bf617faad382bbaf9df9 (commit) from aaae8c76496a97050264e4c49e539b0420496737 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/libasn1c/commit/?id=a4d72b02e2380eadd0abd758bd9fb34… commit a4d72b02e2380eadd0abd758bd9fb34b59f58d8a Author: Harald Welte <laforge(a)gnumonks.org> Date: Fri Oct 27 20:09:16 2017 +0000 Sync debian package version (0.9.28) with acversion All of this code is from asn1c 0.9.28, so let's make sure autoconf + debian packaging agree on the version numbering Change-Id: Ie8dc8f5df7123d4bf7579f6f4e84b7cc33d49607 http://cgit.osmocom.org/libasn1c/commit/?id=8d9147a7645458f7548f972fef1f5f2… commit 8d9147a7645458f7548f972fef1f5f2ac10cccce Author: Harald Welte <laforge(a)gnumonks.org> Date: Fri Oct 27 22:05:31 2017 +0200 Fix compiler warning /usr/include/features.h:148:3: warning: #warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [-Wcpp] # warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" ^~~~~~~ Change-Id: I442e60413b3bee6d365cd5df672a558d68998670 http://cgit.osmocom.org/libasn1c/commit/?id=b7c145daa49bfbd36263bf617faad38… commit b7c145daa49bfbd36263bf617faad382bbaf9df9 Author: Harald Welte <laforge(a)gnumonks.org> Date: Fri Oct 27 22:05:13 2017 +0200 Fix compiler warning In file included from asn1helpers.c:14:0: ../include/asn1c/asn1helpers.h: In function ‘OCTET_STRING_noalloc’: ../include/asn1c/asn1helpers.h:26:9: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] s->buf = str; ^ Change-Id: Ie2fefe710090de779137c36b98239ef4a097b6dd ----------------------------------------------------------------------- Summary of changes: debian/changelog | 6 ++++++ include/asn1c/asn1helpers.h | 2 +- src/REAL.c | 2 +- 3 files changed, 8 insertions(+), 2 deletions(-) hooks/post-receive -- asn1c runtime code as shared library

7 years, 8 months

osmo-iuh.git annotated tag 0.1.0 created. 0.1.0

by gitosis＠osmocom.org

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Osmocom code for Iuh interface". The annotated tag, 0.1.0 has been created at c74124cd46563d799827a853e5d3102192aea33b (tag) tagging e485cdd38b363d84b3f6abc7e683c03c9a882d54 (commit) tagged by Harald Welte on Fri Oct 27 22:18:34 2017 +0200 - Log ----------------------------------------------------------------- Tag 0.1.0 as this version is indicated in Debian package -----BEGIN PGP SIGNATURE----- iQJJBAABCgAzFiEEigrqmUioHHGhfemTShB5H1XkRJYFAlnzlKYVHGxhZm9yZ2VA Z251bW9ua3Mub3JnAAoJEEoQeR9V5ESW1koP/1vT90y8QhegssqJXri3bLAeCxFH o1ZM7KIWr0RPVhFvuK08Kw3nQXMLtEcF2W5dJdfAKxBgae0moPbYwa54j4YEKFUq HE70NDlP0UaSAxBbabg52c8xcY3e2W3YzVIhLnKedEtNXFNPFZ4/5s9xi8ah9Z+/ 8b2JcxOgtfGIXNQwW5VY27O/UWb/D+g8i0f6Q0x/OPO7rln9fKw+gr0mBXINJJfx Pc/2i5HUPOHJ4SaLLSu9qAzjXyFV3nYYe2IJTRm2EsgC/SJ6vSgBwgB6gicLse0r /DXKv5gTjKcJgrnta9nnZqK/o3wAkWmI0DBps2ucZgh0gK1+NA/cc3Bcr+tU4ylQ /mb0fHpputslud1IErcSd3o32RLx/EFW0l2vlmwiU9XK9qpOr5dHMEyCDwOLE9Rw vGv3vmp2Jj3n3oVL2X12ihM+oJPJKO+F2nNJod/OhEZor0KHdLD1ZJdUL5lgGxKa 2e4XD38pruX0s2MnlPeHdcT8kwi5AMxZ3dll7FFRMev+ptliVm+OZhiu9kY2AuPD bWP31zMuEGwJYlheMcpCgBjbqidEHlkSAZV4Sx6RgdE6eZhYhyAQftvueM9hxgX4 HtAS1x87GmO1gMpwjXmFKGnJuTZki4zSlcVIEyN3e2tYeVWRDO11zQ9cQ/Ekc2gh eXPNjFUWfYVidS/N =au2K -----END PGP SIGNATURE----- Alexander Couzens (2): add .gitreview to support git review plugin add /debian package support Alexander Huemer (4): fix Makefile.am fix copy/paste mistake in src/Makefile.am fix build if depenedencies are in distinct directories attempt to fix parallel build, improve AM logic Daniel Willmann (71): src/Makefile: Change order of dependencies so a clean checkout builds tests: Test asn1_u32_to_bitstring and asn1bitstr_to_u32 asn1helpers.c: Fix asn1bitstr_to_u32 function tests: Test asn1_strncpy function asn1helpers: Ensure that string is NULL-terminated tests: Test cropping of string still is NULL-terminated tests: Add test-hnbap to test en-/decoding of HNBAP messages tests/test-hnbap: Decode HNBAP UE Register accept as well test-hnbap: Test decoding of the hnbap registration request asn1helpers: Fix asn1str_to_uX functions test-hnbap: Use different types for UE request and accept IEs test-hnbap: Check CID and Identity Info as well asn1helpers, test-helpers: Use ntoh/hton* to convert integers test-helpers: Also print out hexdump of encoded bit string hnbgw: Add VTY commands to show info about connected HNBs and UEs tests: Add hnb-test to connect to hnbgw and tests its functions hnb-test: Send hard-coded HNB register request for now asn1helpers: Add helper to convert u8/u16 to OCTET_STRING hnbap_common: Add function to HNBAP generate initiating message tests/hnb-test: Generate the HNBAP registration request from ASN.1 asn1helpers: Add 28 bit conversion function and use it for Cell ID hnb-test: setsockopt SCTP_EVENTS is needed to get the sctp_sndrcvinfo hnb-test: Send HNB register request and parse the accept hnb-test: Send UE register request asn1helpers: Fix 24 bit conversion function and use it in hnbgw_hnbap hnb-test: Parse UE register accept Autotoolize the build hnbgw: Lower level of SCTP notif. msg to debug and set default log level to info hnbgw: Handle closed connections correctly hnbgw_hnbap: Process UEDeRegister and try to free correct UE hnbgw: Change logging priorities and add HNBAP category hnb-test: Add HNBAP category and reduce MAIN loglevel to INFO hnb-test.c: Remove pdus.h include as it is not used hnb-test: Send UE de-register after receiving the UE registration accept hnb-test: Handle closed connections correctly hnbap: Free ASN.1 components after they are no longer needed hnbgw_hnbap: Initialize return value and always return something Enable vty command to output talloc report hnb-test: Add an option to transmit multiple UE register/deregister msgs asn1tostruct.py: Fix memory leaks in generated code hnbgw_hnbap.c: Clean up after encoding a UE register accept hnbgw: Free msgb when connection is closed Correct postprocessing of generated files hnbgw: Use libosmo-netif for SCCP connection handling hnbgw: When a HNB is released release associated UEs as well hnbgw_hnbap: Handle hnb deregister message as well asn1tostruct: Add memory free functions and use them in HNBAP tests/dummy_cn_sua.c: Fix ranap_common_cn include Free ies struct after use in tests and hnbgw_cn/rua ranap_common_cn: Add missing break in switch statement ranap_common_cn: Fix copy/paste bug when decoding outcome message ranap_common_cn: Free structs allocated through ranap_cn_rx_cl() ranap_common_cn: Free structs allocated through ranap_cn_rx_co() hnbgw_hnbap: Zero IEs_t before decode is called asn1tostruct.py: Zero IEs_t target struct in decode function Revert "hnbgw_hnbap: Zero IEs_t before decode is called" context_map: Have one mapping per UE/cnlink combination hnbgw: Mark ps_cnlink as ps dummy_cn: Respond to initial UE message with empty ranap message hnb-test: Increment UE conn_id for each new loc_upd_req hnbgw: Print out the hnbgw context map per HNB Add pcap of successful PS/GTP data transfer with osmo-sgsn/ggsn Better capture for PS Data ranap_msg_factory: Use network byte order for 16 bit mode_versions field ranap_common: Add helper function to get IP from transport layer addr ranap: Add custom ranap_decode_rab_setupormodifieditemies() function asn1: Generate _free_*ies function declarations ranap_msg_factory: Add keystatus parameter for security mode cmd ranap_msg_factory: Fix endianess in paging command examples: Adjust IP address of example config contrib: Add systemd service file for osmo-hnbgw Harald Welte (202): add Iuh relevant specs + some notes add RUA asn.1 syntax from 3GPP TS 25.468 V12.1.0 (2014-12) Import HNBAP asn.1 from 3GPP TS 25.469 V12.4.0 (2015-03) Import RANAP from 3GPP TS 25.413 V12.4.0 (2015-03) RUA: Add missing RUA-PDU-Contents.asn and RUA-PDU-Descriptions.asn Add Specs in DOC format, not just PDF add by_chapter and by_name symlinks to specs add a first RANAP (but Iu, i.e. SCCP+M3UA) pcap file add various management / OML related specs (32.57x, 32.58x, 32.82x) some more textual notes regarding the specs very early intial code snippets for handling HNBAP in a HNB-GW add ffasn1c generated code for HNBAP, RANAP and RUA Add generated code for RUA using eurecom asn1tostruct.py add gitignore file further tiny steps of progress on the hnb-gw infrastructure give asn1c generated files more useful names fixup ffasn1 first compiling code (untested) move asn.1 helper functions to asn1helpers.[ch] ADD IU-Common.asn as an attempt to unify the message parsing add iu_common.h using C structs to describe PER encoded Iu headers hnbgw: Actually link in + call ffasn1c runtime library HNBAP ASN.1: Rewrite to avoid information object classes RANAP ASN.1 Rewrite to avoid information object classes RUA ASN.1 Rewrite to avoid information object classes remove ffasn1c generated hnbap.[ch] from source RANAP: Further qualify Constants. They're not just integer Add Procedure Codes and IEI constants to CommonDataTypes asn1 syntax fixup for ffasn1c generate ASN.1 structures for each message withotu iformation object class HNBAP: Remove HNBRegisterAccept / HNBRegisterResposne naming inconsistency import ans1tostruct.py from Eurecom OpenAirInterface asn1tostruct.py: Don't claim copyright on auto-generated code migration of code from ffasn1c to asn1c + asn1tostruct.py actually build + link the asn1c generated HNBAP ASN.1 successful has only one 'l' (copy+paste error) implement HNBAP_DEBUG via osmocore DEBUGP add .gitignore for src directory import ans1c generated C sources for HNBAP Makefile: chrdir to asn1c subdir and build library there makefile: asn1tostruct.py rules for RUA and RANAP start using the shared libasn1c, now that it has aper support cosmetics: asn1c now no longer explicitly states -fnative-types update .gitignore hnbgw: Bind to INADDR_ANY, not to localhost only hnbgw: Initialize linked list header of hnbgw's hnbgw: Fix SCTP server/receiver hnbgw: zero-initialize the output struct before aper_decode() Use implement HNBAP transmit using per-hnb write_queue use htonl(ppid) when sending a SCTP message more error logging in hnbap TX successful outcome hnbap encode: don't pass 0 as available buffer space hnbgw.c: Fix double-free in wait-queue transmit code hnbap: Don't enqueue a NULL msgb for transmit avoid parsing SCTP noficiations as user data msgb_free() all received messages after handling add Makefile.local to generate prefixed RUA code add asn1c generated RUA c+header files add asn1c generated C source for RANAP (and Makefile to regenerate) build + link to RUA and RANAP libraries Cleanups (rename 'asn1c' to 'hnbap', Makefile sanitizing) Add README file about current state add AGPLv3 license text hnbap Makefile: add asn1c include directory asn1tostruct.py: Add support for type prefixing enable building + linking of RUA support actually dispatch RUA messages to RUA handling code rua: dispatch different message types and print context/cause don't attempt to regenerate ranap-common, it is not auto generated! ranap: Add more manual definitions to RANAP-PDUs first dispatch of RUA into RANAP Back RUA/RANAP integration until RANAP Reset works for cs+ps introduce ue_context management remove obsolete asn1c makefiles in the asn1c/ hierarchy ue context: fix linked list insert respond to HNBAP UE REGISTER REQ withe correspnding ACCEPT hnbap: Print error messages in error cases move BCD string encoding/decoding functions to iu_helpers.[ch] iu_helpers: fix encoding of BCD (like IMSI) into OCTET STING add unit test for BCD encoding/decoding various cleanups (compiler warnings, coding style) ranap: prepare decoding of InitialUE message RUA: hand off RANAP from all PDU types, not just UnitDataTransfer ranap: Parse InitialUE message and hex-print NAS PDU ranap: receive/parse DirectTransfer the Context ID is a 24bit number, we cannot use len = 4 bytes! add copyright statement and AGPLv3 headers to source code files make asn1bitstr_to_u32() work for sub-32bit bit-strings add asn1_u24_to_bitstring() add more relevant/related specs rename ASN_MODULE_FILES to ASN_MODULE_SOURCES Re-add the 'regen' targets lost in the automake transition RANAP: Add more types/IEs to RANAP-PDU.asn and re-generate C Make .gitignore aware of autoconf artefacts asn1tostruct: Avoid erroneous double-underscores One further RANAP hacking session hnbgw: Use the now-compiling RANAP encoder+decoder code {rua,hnbap,ranap}_common: Add missing encoding functions {hnbap,rua,ranap}_common.c: Reduce code duplicatioon Add ranap_generate_outcome() function WIP: add some early code for generating required RANAP messages hnbap_common: Fix copy+paste mistake (use hnbap msgb allocator) ranap_common: Add function to wrap IEs into a RANAP_ProtocolIE_FieldPair_t test-ranap.c: More WIP code for convoluted RANAP message encoding RANAP: Split FormatInformationParameter / SDUParameterItem test-ranap.c: Further WIP, it now actually compiles ranap: Ensure we free any intermediate dynamically allocated memory ranap: Use CALLOC() macro of libasn1c hnbap/rua: Don't usse malloc() directly but use CALLOC() macro {hnbap,ranap,rua}_common: use FREEMEM(), not free() directly {hnbap,rua,ranap}_common: check for encoding errors in new_ie() ranap_common: Fix error cleanup path while generating IE Pair implement BIT_STRING_fromBuf() similar to OCTET_STRING_fromBuf() First compiling (and leak-free) RANAP message generation functions Makefile.am: Replace .PHONY asn1tostruct.py rules ranap: Don't forget ProtocolIE-CointainerPair around ProtocolIE-FieldPair ranap: No need for htonl() of IP addresses and the like ranap: Don' shift the RAB ID by 3 bits ranap ASN.1: Define IMSI as OCTET STRING to work around asn1c bug Add various RANAP packet captures (pcap files) found on the net add TS 25.412 spec Makefile.am: Try to model the asn1tostruct.py generation dependencies move COPYING file to root directory Add WIP code for SCCP User Adaptation (SUA) and SCCP User SAP SUA: More FIXMEs SUA: Ensure osmo_ prefix is used on all global symbols remove sigtran code, now part of libosmo-sccp hnbgw: Add SUA client socket towards localhost use msgb_sctp_ppid() from libosmo-netif, remove local declaration Introduce DRANAP/DRUA log categories to separate logging Add a context mapper to map RUA ContextIDs <-> SUA Connection IDs hnbgw_rua: Don't use msgb as imput, allow more parameters hnbgw: Bring all parts together Implement forwarding of RANAP PAGING from CN to all HNBs improve logging, remove obsolete FIXMEs, return of non-void functions RANAP: Replace the last remainng TBCD-STRING with OCTET STRING hnbgw_rua.c: Incoming context IDs are 24bit wide according to spec asn1helpers.h: Add missing declarations of functions in asn1helpers.c ranap: New ranap_new_msg_initial_ue() funcition ranap_msg_factory: use OCTET_STRING_fromBuf() in ranap_new_msg_dt() ranap_msg_factory.c: Fix compiler warnings hnb-test: Add VTY to manually issue Iuh messages add rua_helper.[ch] missing from previous commit ranap_common: Add ranap_cause_str() to stringify RANAP Cause don't return undefined strings from rua_cause_str() hnbgw_ranap: Print RANAP Cause in RESET and ERROR INDICATION hnbgw_rua.c: Print RUA cause in error indication hnbgw_hnbap: Print HNBAP Cause during UE De-Register Fix typo / spelling mistakes Add new common RANAP parsing code for CN elements factor out some common shared test init code ranap_common: Add value_string for procedure code and presence use libosmocore SCCP_SSN_RANAP definition ranap_common.c: Add ranap_parse_lai() add 'dummy cn' as a stub core netwrok element to which hnbgw connects don't double-free msgb's in rua_helper and ranap_common_cn properly resolve the cnlink from SUA signalling link context_map: Don't forget to store the SCU connection ID Start to use SUA local referencs from 1000 upwards More verbose logging (CS/PS domain) remove ranap_parse_lai() from hnbgw_ranap.c ranap: Allocate msgb's with headroom for SCCP User primitive pushing Dummy CN: Create a per-UE connection context and resolve it. dummy_cn_sua.c: Fix syntax errors dummy CN: Handle Iu Release Request (respond with Release Command) Dummy CN: Handle RANAP payload of DISCONNET.ind RANAP-PDU-Contents: fix syntax error regarding InitialUE-Message ranap_msg_factory: CipheringInformation is optional in SecurityModeCommand ranap_msg_factory.c: Use X.213 NSAP encoding for TransportLayerAddr ranap_common_cn: Fix typo ranap_common_cn: Handle non-terminal 'outcome' for RAB-ASS.resp more verbose logging in various places make bitrates configurable in new_rab_par_data() fix copy+paste mistakes when encoding GTP TEI in RAB Parameters ranap_msg_factory: functions for RAB and IU Release Request ranap_msg_factory: Mark 'RANAP_Cause_t *' as const asn1helpers: Add new OCTET_STRING_noalloc ranap_msg_factory: Fix memory leaks in OCTET_STRING test-ranap: Call new RANAP encoder functions from ranap_msg_factory.c import message sequence charts (ladder diagrams) for RUA/RANAP/NAS Introduce libosmo-ranap.so as shared RANAP lib Makefile restructuring; install ranap header files merge (+rename) iu_helpers.c into libosmo-ranap update .gitignore don't include hnbgw.h from ranap header files move asn1helpers.[ch] to libasn1c steps towards making 'make distcheck' work add test-ranap to testsuite move tests/rua_helper.[ch] to src directory add git-version-gen to auto-generate git based version number add pkg-config file for libosmo-ranap hnbap_common.c: Fix include path ranap_common_cn.c: Use call-backs rather than function calls make ranap_common.cn.[ch] part of libosmo-ranap also 'sed' the include path of the ranap_common.h file import TR 25.931 with examples of signalling procedures update dependencies in README file Add test case about RANAP MaxBitrate encoding test-ranap: Add test case about constrained integer range decode RAB parameters: add Extended Max Bitrate ue_context_alloc(): Avoid ue->imsi without NULL termination Update README with project related information and convert to Markdown Holger Hans Peter Freyther (3): contrib: Add build script used on the jenkins to build it contrib: Put asn1c into the PATH as well jenkins: Disable parallel make as it is broken right now Neels Hofmeyr (167): README, .gitignore really fix src/Makefile.am Remove obsolete ffasn1c files. move asn1 headers to include/ dir (1/5) move asn1 headers to include/ dir (2/5) move asn1 headers to include/ dir (3/5) move asn1 headers to include/ dir (4/5) move asn1 headers to include/ dir (5/5) gitignore m4 and libosmo-ranap.pc Remove osmo-iuh subdir level from include/ (1/2) Remove osmo-iuh subdir level from include/ (2/2) install only ranap headers, make rua and hnbap headers 'noinst'. Fix subdirs of include/osmocom/Makefile.am Fix -I in tests/ (broken by include dir changes) rebuild en/decoders when asn1tostruct.py changed gitignore (dummy-cn, testsuite.dir) asn1tostruct.py: don't generate unused local struct instances. Fix install location to osmocom/ranap (without osmo-iuh) move ranap_*.h,iu_helpers.h to include/osmocom/ranap/ Add missing ranap_ies_defs.h (generated from 'make regen' but we want it committed) Add ascii art protocol overview. Add readme to hint at mscgen ranap_common.h: declare ranap_parse_lai() hnbgw: hnb_context_alloc(): fix missing free, missing return, wrong error return type dummy_cn_sua: missing include hnb-test: fix wrong domain indicator in ranap. hnbgw vty: add logging commands hnbgw: fix errmsg typo doc: tweak protocols ascii art test-ranap.ok: fix expectations after commit 49f99cd26 osmo-hnbgw, hnb-test: allow configuring VTY address hnb-test: some rua rx printfs hnb-test: comment on gen_initue_lu() IMSI hnb-test: tweak comment hnb-test: decode NAS pdu when receiving RUA from CN hnb-test: attempt to reply to an MM Identity Request avoid a warning by declaring struct gprs_ra_id opaquely hnb-test fix id resp hnb-test-ranap.c: fix missing return hnb-test: replace some hex vals with GSM48_* constants hnb-test: add messages leading to Location Update Accept hnb-test: make hnb-gw address configurable fix build: move local include dir before sys installed one build: use $top_srcdir instead of ../ hnb-test: send TMSI REALLOC COMPL only when LU ACC sent a TMSI Move sccp_helpers.[hc] to libosmo-sigtran use of sccp_helpers: apply osmo_ name prefix addition hnb-test: factor out MM header parsing hnb-test: print LU Reject hnb-test: answer MM Authentication Request hnb-test: print sent bytes rename README.msc to README ranap_parse_lai(): add LAC size check, and log all parse errors ranap_parse_lai(): Fix wrong BCD decoding for MNC. Add test. hnb-test: use gsm48_hdr_pdisc() and gsm48_hdr_msg_type() instead of bitmasks hnbgw: set DMAIN loglevel to DEBUG by default cosmetic: add comment to hnbgw_cnlink_init() hnbgw: add handle_cn_conn_conf() debug logging hnbgw: debug-log cn disconnect ind hnbgw: set default RNC ID to 23 (for testing) hnb-test: don't segfault when msgb has no l3 hnb-test: rx dtap: log message size hnb-test: on auth response, make it seq nr 2 hnb-test: parse_mm: assert MM pdisc hnbgw_cn.c: add #include for inet_ntoa() hnb-test: generate SRES from hardcoded Ki hnb-test: simplify crossing message layers hnb-test: cosmetic: rename hnb_test_nas_tx_dt() to hnb_test_tx_dt() RANAP Initiating msg: rx and free Security Mode Command ranap_msg_factory: add Security Mode Complete msg generator hnb-test: add Security Mode Command handling add missing comment in ranap_msg_factory.c ranap_msg_factory: add Iu Release Complete msg generator ranap_common_cn.c: for now add more decoding that doesn't belong here hnb-test: request Iu Release, handle Iu Release Command cosmetic: comment typos hnbgw_cn.c: pass cnlink instead of slink hnbgw_cn.c: fix uninitialized hnb_gw pointer cosmetic: indentation fix hnbgw: add debug log about new CN links hnb-test: receive Paging, add CL rx dummy-cn: add optarg, add --bind argument ranap_parse_lai(): properly initialize out-arg, adjust test experr hnbgw: remove unused static function cosmetic: comments, log typo, explicit pointer compiler warning: hnbgw_ranap.c: include ranap_msg_factory.h new RAB: add use_x213_nsap parameter / change it to bool ranap_msg_factory: fix RAB IP addr byte order for use_x213_nsap==false UE Register: fix: free ies when no IMSI is found hnbgw: dumb fix of context map hnb_list double delete test-ranap: fix missing free in test_aper_causemisc, fixes expout fix: test-ranap.c: missing NULL init fix test-ranap, after tmsi endianness fix make regen: ~8x faster: use sed script instead of single invocations make regen: fix: use $(MAKE) instead of make asn1tostruct.py: use '#\!/usr/bin/env python', not '#\!/usr/bin/python' jenkins.sh: fix, remove code dup jenkins.sh: echo HEADs' hashes, echo each project name prominently jenkins.sh: build both with checked-in and regenerated asn1 code fix compiler warnings with new libosmo-sccp: rename to osmo_sccp_* fix compiler warning: osmo_prim_cb() has void* arg hnbgw: add copyright to vty_info hnbgw: add cmdline arg parsing with default options hnbgw: add config file and -c cmdline option hnbgw: make cmdline options stronger than config file hnbgw: move vty commands out to new hnbgw_vty.c hnbgw vty: add empty hnbgw and hnbgw/iuh vty nodes hnbgw: make Iuh bind address configurable via VTY add to dist: doc subdir with all current doc files add doc/examples, Makefile.am adds all *.cfg files generically doc: add example osmo-hnbgw.cfg jenkins.sh: cosmetic: mark start of main build RAB Assign for voice: heed the x213 nsap flag UE Register with TMSI: reply with a Register Reject jenkins.sh: don't build twice tests: don't log filename nor color in unit tests build: use tar-ustar to allow paths longer than 99 build: remove subdir-objects from configure.ac, it is broken build: fix ranap gen, use same for gen hnbap and rua gen build: distcheck: add missing distclean files build: distcheck: look for asn1 in top_srcdir, not top_builddir build: distcheck: add missing bits for testsuite distcheck build: cosmetic: hnbap: undup asn1 src path build: move headers to include/osmocom/* build: parallel build: require ../libosmo-ranap.la from tests/ jenkins.sh: enable make distcheck ranap: include port in RTP TransportLayerInformation comment: note RAB assignment spec reference log VTY telnet bind only once hnbap: add UE Register Reject for pTMSIRAI identity hnbgw: UE context: add handling by tmsi identification hnbap: accept UE Register Requests with TMSI and pTMSI log: hnbgw: add hnbap UE context allocation info log hnbgw: vty conformance: rename iuh 'bind' command to 'local-ip' fix: apply rename of osmo_sua_link_get_user_priv() jenkins.sh: output all test logs when 'make check' failed build: be robust against install-sh files above the root dir configure: check for pkg-config presence fix build: look for generated sources in builddir, not srcdir jenkins.sh: use osmo-build-dep.sh fix msgb talloc context initialization cosmetic: hnbgw: addr related renames, move define, move comment hnbgw: cosmetic: local-ip config: drop getter function hnbgw: parameterize iuh local port: add vty cmd hnbgw: vty: set explicit go_parent_cb hnbgw: parameterize IuCS and IuPS ips and ports: add vty cmds hnbgw_rua: reject invalid domain indicator fix error rc in various ASN.1 decoding functions hnbgw: rua rx: fix rc and log unhandled Private Msg log: fix number format for domain indicator cs RAB: add nAS_SynchronisationIndicator ranap: make X.213 NSAP 160 bits long, zero padded new_rab_par_voice(): add bitrate params, call with (6700, 12200) doc: OsmoMSC + HLR instead of CSCN jenkins: add value_string termination check doc: fix osmo-hnbgw.cfg example jenkins: build from libosmo-netif master cosmetic: move callers' common switch() into rua_to_scu() migrate osmo-hnbgw to libosmo-sigtran's SCCP/M3UA sccp_sap_up(): guard against NULL pointers rua_to_scu(), rua_rx_init_connect(): add debug logging rua_to_scu(): add debug log for calling/called addr set RANAP msgb headroom to 512 (times two) cn unitdata: verify correct remote addr ranap_common.h: fix include of asn1c/asn_application.h move openbsc.git's iu.h, iu.c, iu_vty.c here as iu_client make point codes configurable by SCCP address book Pau Espin Pedrol (2): asn1tostruct.py: specify python version in shebang hnbgw: Fix crash if cnlink fails to connect ----------------------------------------------------------------------- hooks/post-receive -- Osmocom code for Iuh interface

7 years, 8 months

libosmo-sccp.git annotated tag 0.8.0 created. 0.8.0

by gitosis＠osmocom.org

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "SCCP Library". The annotated tag, 0.8.0 has been created at 35f936d797aaee397928a5f5ab21ccc34af50a66 (tag) tagging d1c552bcfcd74c5a13c67524843c549645c7a535 (commit) replaces 0.0.6.3 tagged by Harald Welte on Fri Oct 27 21:57:23 2017 +0200 - Log ----------------------------------------------------------------- Release 0.8.0 on 2017-10-27 -----BEGIN PGP SIGNATURE----- iQJJBAABCgAzFiEEigrqmUioHHGhfemTShB5H1XkRJYFAlnzj6MVHGxhZm9yZ2VA Z251bW9ua3Mub3JnAAoJEEoQeR9V5ESWr6wQALphIgl08P5AqSWBw7oMvln6xJdm tU4uf13vAwIDuq8WWXoIR8ku1lBiCRVOyCb1ot+XM2rWBqKm/fP7QktccD5av1kF B2BTZ5ROPRS31FUyh8ITZgzEnMCbbHiENLeQ7G7FGq2W3mEdpOG3kH4nhAg2D0LO RVBDAWyY5X71N0k6FxN/ez1snh40HCskF7v6fD2wGBb3fDyKKO3M6Vrf+GZGcYFi iJae/drvZwEASBaPqiRYitArep6YfmgV+0P2A3JjspiW/0QNKEe6kyjkxEk91RD2 35/GIbOdSuycSurzDM5H6mf42dxQI7kSSRzdqYur6u7V9FDVJBvt6fyCHyosHEZz ul0DVFDhA1y5fFPna6cJG/suHTsUo9l1ekKXSSmNy6CT23asa5D6AEYigMyTflBn FwVlfXJYFy2U+ncqsJZ3F+0QpUDkWWlywrooqFmuFFIY/7+/MuOmsASAY2E3QMbO uVuMj744O4S8O3oQolxzY+vWPHLj8CbczKNxzHLRK59v1tUYXGynQNLtr8GChcwR ZqvWdAD95KkPdzz0Ttl9W0kdOqUR2jpn6CwaE/KzGdEBwRDVEGalckjaYWpu4g/u qz5Iua4g/G8F02+u8SKHPKC1HlRG7V+7VVKDOIci0AXuPJXBcYt7YwDbM9YtoF3P YlBzK0YVOisTb+JC =IFgy -----END PGP SIGNATURE----- Alexander Huemer (2): Makefile.am: Use AM_CPPFLAGS fix build if depenedencies are in distinct directories Andreas Rottmann (2): gitignore: Add 'compile' build: Fix "make distcheck" Arran Cudbard-Bell (3): Ignore more build/libtool products Fix the .pc files so the -l arg matches the installed libraries Add missing xua.pc file Daniel Willmann (1): tests: Don't delete atconfig in clean Harald Welte (186): Import SUA (SCCP User Adaptation) and SCCP User SAP libosmo-sigtran: Add pkg-config integration Add some SUA client and server example code sccp.c: Fix compiler warnings about size_t / %u Properly define SCCP_SAP_USER without random magic number fix some recently-introduced compiler warnings Add missing OSMO_SCCP_SSN_RANAP for RANAP SSN fix format string compiler warnings (%zu for size_t) Add more OSMO_SCCP_SSN_ defines sua: Remove unused 'cur' variables mtp_parse_test: Comment out unused but defined packets allow user to give private data to osmo_sua_user_create() sua: Fix typo in log message sua: call conn_disconnect() in sua_disconnect_req() sua: Ensure that a SUA client will continuously try to reconnect Start to log + handle SCTP notifications migrate some generic XUA helpers from sua.c to xua_msg.c xua_msg: Make DXUA available to other XUA code protocol/sua.h: Add #defines for CAUSE group values (from RFC) sccp_types.h: Add 'struct sccp_data_unitdata_service' sccp_types.h: Include stdint.h sccp/sccp.h: Add #include to linuxlist.h Move xua_msg_add_sccp_addr() to xua_msg.h and export it sccp_helpers: Add osmo_sccp_{addr,gt}_dump() functions Add xua_msg_part_get_u32() to get U32 value from xua_msg_part Replace unused m3ua_types.h with protocol/m3ua.h sua.h: Define more IEIs; base definitions on m3ua.h sua.h: Add #define for the varius SUA protocol errors gitignore: add 'tags' files as created by 'make ctags' gitignore: use one wildcard line for all test executables xua_msg: Add xua_msg_free_tag() and xua_msg_copy_part() xua_msg: Add concept of xua_msg_class and xua_msg_dialect sccp_sap: Use zero-terminated string for GT digits in osmo_sccp_addr sccp_sap: Add routing indication (RI) to osmo_sccp_addr sccp_sap: Add support for N-NOTICE.indication xua_msg: Add support for encoding Global Title in osmo_sccp_addr xua_msg: Add support for encoding IPv4 addr in osmo_sccp_addr Add mtp_sap.h file with definitions for MTP-USER SAP xua_msg: Add MTP routing label to 'struct xua_msg' License headers: Should always have been GPLv2-or-later xua_msg: Add support for msg_event_maps Add new 'osmo_ss7' SS7 core code with M3UA, ASP/AS FSM, ... sua: Make use of xua_msg_dialect sua: Extend address parsing with GT, RI and IPv4 support sua.c: Replace sua_msgb_alloc() with new sccp_msgb_alloc() Add SCCP <-> SUA message transcoding routines Add tests for xUA code + SCCP/SUA transcoding Add new SCCP implementation remove tests/sigtran: it's not a test case sccp_sap license header was missing SUA: Port to new osmo_ss7 and SCCP code Add example program how to use M3UA+SCCP client and server xua: Remove library-internal DXUA log subsystem sccp: add osmo_sccp_user_{get,set}_priv() API function osmo_ss7: make OVERRIDE the default traffic mode type (0) add converter functions between osmo_ss7 and m3ua traffic mode types m3ua: Include RC IE of AS in Tx; validate RC IE on Rx xua_asp_fsm: Always return BEAT-ACK for BEAT, including BEAT DATA IE xua_as_fsm: Include routing context (if configured) in NTFY message xua_cli_conn_cb: Print flags as hex, not decimal. xua_srv_conn_cb(): Print sctp_recvmsg flags (line in xua_cli_conn_cb()) sigtran: fix various memory leaks (msgb and xua_msg) Add osmo_sccp_get_ss7() accessor function m3ua_example: Add talloc reporting osmo_ss7: Fix segfault when routing MTP-TRANSFER.req to ASP without sctp connection protocol/m3ua.h: Add definition for RKM reg/dereg result codes xua_msg: Add xua_from_nested() helper function for nested IEs Add osmo_ss7_find_free_rctx() function to get unused rctx osmo_ss7: Add support for dynamic ASP registration Add M3UA RKM (routing key management) support, SGW side only M3UA: RKM DEREG-REQ should contain routing context, not routing key xua: move notfiy parameters from xua_internal to sigtran_sap and rename them xua: report N-ERROR and N-NOTIFY primitives to layer manager move layer_manager from xua_asp_fsm priv to osmo_ss7_asp send M-SCTP_ESTABLISH.ind to Layer Manager osmo_ss7: default point-code format for parsing/printing without ss7_instance m3ua: Remove inbound routing context before routing osmo_ss7: Fix msgb memory leaks in error paths (asp not connected) osmo_sccp_make_addr_pc_ssn(): Set routing indicator M3UA: Respond with "Unexpected Message" if ASPTM is received too soon M3UA: Make sure to reject unsupported traffic mode types M3UA: Send "Unexpected Message" when receiving ASP_UP-ACK in ACTIVE M3UA: Send opportunistic ASPACT-ACK to ASPACT-REQ in ACTIVE state M3UA: Handle opportunistic ASPIA in INACTIVE state M3UA: Properly reject invalid/unknown routing context M3UA: Ensure XFER messages are not sent on stream 0 M3UA: Reject Message Class XFER / Type != DATA m3ua: cosmetic clanup. We can simply return the M3UA errror code Allow clients to specify local IP/port xUA: Fix endianness handling of PPID and STREAM_ID Fix for SCCP CC without user data SCCP SCOC: Ensure user primitive msgb->l2h always poinst to tail SCRC: Print NOTICE log message if we attempt to use (missing) GT routing xua: Add value_string for routing key [de]registration results osmo_ss7: Send M-SCTP_RELEASE.ind for close of xUA client or server socket osmo_ss7: Use proper string name for dynamically-created ASP osmo_ss7: Instruct libosmo-netif to use {TCP,SCTP}_NODELAY on all sockets osmo_ss7: Generate M-SCTP_RESTART.ind towards Layer Manager osmo_ss7: Fix memory leak with sock_name on clients at re-connect time osmo_ss7: When destroying an AS or a linkset, delete all routes osmo_ss7: Make sure to start server-side ASP FSM for dynamically created ASPs osmo_ss7: destroy any ASPs allocated dynamically at accept() time sccp_user: Make sure to create client-side AS with primary PC osmo_ss7: Allocate local routing key ID and use it as lookup key for AS osmo_ss7: Fix SCTP PPID byte width sccp_test_server: Don't use '0' as local reference sua2sccp: Only encode SCCP options permitted for given msg type Add osmo-stp executable as new "Osmocom Signaling Transfer Point" osmo_ss7_vty: 'show' commands for AS, ASP, route Add a default layer manager using RKM to register PC with SG xua_rkm: Improve comments about functions xua_rkm: Make dynamic registration of Routing Keys work osmo_ss7: Release any dynamically-allocated ASs STP: re-structure VTY interface; introduce 'cs7 instance' node osmo_ss7_vty: Merge the SUA and M3UA VTY nodes move osmo_ss7_vty.c [back] into libosmo-sigtran sua: Reject DATA messages on SCTP stream 0 osmo_ss7_vty: Make 'instance <0-15>' mandatory of all show commands osmo_ss7_vty: Add 'show cs7 instance <0-15> users' command osmo_ss7_vty: Add Command to permit (or disallow) dynamc routing key allocation osmo_ss7_vty: Add 'description' command for SS7 instances Don't overwrite existing data in osmo_ss7_instance_find_or_create() osmo_ss7_vty: Introduce xUA listener accept-asp-connections command osmo_ss7_vty: Fix config file writing for xUA listeners Add exampel osmo-stp configuration file stp: Add copyright notice osmo-stp: Remove hack to always enable debug logging osmo-stp: Add command line options and daemonize functionality osmo_ss7_vty: Don't save dynamically generated AS / ASP sccp_scoc: Memorize if a connection is incoming or outbound SCCP: Add VTY interface for SCCP m3ua_example: Add SS7 and SCCP VTY ss7_vty: don't re-define xUA dialect strings osmo_ss7_vty: Print AS and ASP state names during 'show' SUA/M3UA: Implement T(r) recovery timer of Application Server FSM get rid of global osmo_ss7_xua_servers variable osmo_ss7: Clean up all ASPs established via xua_server upon destroy osmo_ss7: Fix protocol of dynamically allocated ASPs m3ua: Generalize + Export function to generate MTP-TRANSFER xua_msg osmo_ss7: avoid crash during disconnect after unknown ASP Add new ASP event XUA_ASP_E_SCTP_EST_IND introduce new osmo_ss7_asp_disconnect() function xua_as_fsm: We might change to AS_INACTIVE after T(r) expiry xua_asp_fsm: Fix ordering of messages to pass M3UA_SGP_ASPSM_O_003 SUA: Reject unknown Connectionless Message Types SUA: Make sure to reject unknown CO message types SUA: Our SUA implementation needs an SCCP instance in ss7_instance Add IPA/SCCPlite support as SIGTRAN alternative osmo_ss7: make sure to re-set all state on client disconnect osmo_ss7: Allocate message buffers with headroom IPA: Override/Set point codes stp: Install VTY commands for FSM introspection Address some negative integer handling issues xua_default_lm_fsm: Missing printf() argument ss7_test: Avoid possible NULL pointer dereference in test case xua_rkm: Fix handling of RK Registration with multiple Routing Keys sccp2sua: Avoid array overruns in sccp_is_{mandatory,optional}() sccp_user: Add missing 'break' statement osmo_sccp_user_sap_down(): Avoid uninitialized pointer deref deliver_to_mtp_user(): Fix null pointer dereference scu_gen_encode_and_send(): Fix NULL pointer deref ss7_test: Fix '=' that should have been '==' sclc_rx_cldt(): Don't try to dereference user data_ie without check m3ua_to_xfer_ind(): don't use data_ie without checking it exists sclc_rx_cldr(): Don't try to dereference user data_ie without check m3ua_decode_notify(): Ensure status_ie is valid before using it sccp_scoc: don't pass variable as argument if we know it's NULL osmo_ss7_user_unregister(): Don't dereference NULL user osmo_sccp_addr_parse() Fix point code integer precision handling SCOC: When sending a CORE/CR, SUA SRC_ADDR == CallingPartyAddress SUA-to-SCCP: Fix use of Called/Calling vs. Src/Dest Address stp: Add test scripts for executing m3ua-testtool and sua-testtool jenkins.sh: Proper error message if local environment isn't set up Fix SCCP client crash on xUA server (STP) disconnect OsmoSTP: Install our default set of signal handlers osmo-stp: Fix process termination on SIGINT+SIGTERM sccp_sap.h: Fix SSN for BSSAP and BSSAP-LE Makefile.am: Link libosmo-sigtran against libvty osmo_sccp_addr_encode(): Check for more erroneous situations osmo_sccp_addr_encode(): Fix truncation of point codes osmo_sccp_addr_encode(): Catch some more errors and log them implement unit tests for osmo_sccp_addr_{parse,encode}() update libosmocore/libosmo-netif dependency to current versions Doxugen: s/libosmo-sccp/libosmo-sigtran/g Proper Debian packaging with split packages, -dbg, -doc, ... Tag/Release Version 0.8.0 Holger Hans Peter Freyther (28): debian: Add the changelog for the next release debian: Add debug packages with the debug symbols misc: Use a unsigned result for the sizeof sizes misc: Fix a compiler warning about the filter_fn type sccp: Create sccp_create_cr and use it in the connection creation debian: Enable hardening for the SCCP library build debian: Move to multi-arch support debian: By definition this only creates a dev package debian: Bump the version debian: Add misc depends as wanted by lintian endian: Use new osmocom/core/endian.h XUA: Move m2ua headers to sigtran, create xua_types.h and m3ua_types.h xua: Generalize the m2ua_msg and call it xua_msg m3ua: Add the definition of the protocol data header mtp: Implement reading the OPC/DPC for little endian mtp: Error about unknown endian as well mtp: Convert to pragma once mtp: Add implementation from cellmgr mtp: Add missing defines from cellmgr-ng mtp: Correct the pointcode mask debian: Build new version of the package sccp: Allow to specify the context of the incoming message debian: Prepare a new release sua: Attempt to fix make distcheck debian: Require libosmo-netif+sctp header jenkins: Add the build script from jenkins here debian: Make upgrading from debian SID easier sccp: Fix a classic typo of mine Installation Owner (1): sccp: fix possible nullpointer deref Max (7): Fix required version of libosmo-netif Add gerrit settings Integrate Debian packaging changes Fix debian builds Use value string check from osmo-ci Use release helper from libosmocore Add doxygen docs Neels Hofmeyr (53): Fix RANAP SSN: it's 142, not 143 sua_test_common.c: use global RANAP SSN definition clarify fixme comment, x7 fix log msg typo, x5 cosmetic: rename osmo_sua_link and osmo_sua_user to osmo_sccp_* fix struct member typo: repsonding_addr in osmo_scu_disconn_param build: be robust against install-sh files above the root dir configure: check for pkg-config presence jenkins.sh: use osmo-build-dep.sh, log test failures Revert "Fix the .pc files so the -l arg matches the installed libraries" NULL safety: sccp_create_sccp_addr: copy only non-NULL sock->gti fix NULL deref: sua_accept_cb: missing error-return SUA COIT: send dest ref nr, not dest addr add comment (meaning of COIT) add RFC 3868 (SUA) spec in HTML cosmetic: add comments for GT, PC, SSN to help noobs finding their way remove two compiler warnings for unused variables parse SCCP src+dst addresses cosmetic: sua.c: comments fix: use proper disconnect prim param type Add sccp_helpers.[hc] moved from osmo-iuh, 1:1 at first sccp_helpers.h/.c: fix: apply rename of osmo_sua_link to osmo_sccp_link sccp_helpers: adjust .h include and copyright sccp_helpers: add osmo_ prefix to all functions sccp_helpers: add convenience function for RANAP unitdata jenkins: add value_string termination check Revert "configure.ac: Use -Werror in C(PP)FLAGS" fix sanitize make check: xua_test: initialize gt_out. cosmetic: drop second ';;' add/tweak various logging to help figure out complex routing gen_mtp_transfer_req_xua(): add addr to error log for missing DPC sccp_user.c: add missing error logging Revert "SCOC: When sending a CORE/CR, SUA SRC_ADDR == CallingPartyAddress" fix compiler warning: xua_test: hexdump pointer type sccp_helpers.h: remove duplicate declaration of osmo_sccp_make_addr_pc_ssn() add osmo_sccp_addr_set_ssn() osmo_ss7_vty_init: ensure a talloc ctx is set by user add OSMO_SS7_PC_INVALID, add osmo_ss7_pc_is_valid() ensure valid primary_pc in osmo_ss7_instance consistency: use OSMO_SS7_PC_INVALID for osmo_sccp_user constify ss7_instance arg of osmo_ss7_pointcode_print() introduce OSMO_SCCP_RI_NONE to indicate unset RI add osmo_sccp_addr_name() and three value_string[]s fix osmo_sccp_addr_dump(): actually print RI sccp-addr vty: set RI to SSN_PC when setting a point-code sccp_helpers: check buf len in append_to_buf() cosmetic: ws in log safer osmo_sccp_make_addr_pc_ssn(): clear all values vty: fix doc for 'xua rkm routing-key-allocation' osmo_ss7_vty: fix 'as' / 'routing-key' command cosmetic: aggressively set vty->index to NULL in osmo_ss7_vty_go_parent() vty: add 'asp' / 'local-ip' command sccp_scrc: fix Network Indicator in SIO composition Pau Espin Pedrol (12): sccp_scrc: Fix warning: uneeded constant evaulation sccp_test_vty: Fix compilation warning: Unused variable xua_internal.h: Add missing functions required by xua_test stp_main.c: Add missing header xua_test.c: remove useless keyword in struct declaration configure.ac: Use -Wall in C(PP)FLAGS configure.ac: Use -Werror in C(PP)FLAGS configure.ac: Fix C(PP)FLAGS for BSD build sccp_scoc: Fix trailing whitespace sccp_scoc: Fix compilation warning and leave a pragma message contrib: Enable -Werror by default contrib: Add osmo-stp systemd service file Philipp Maier (26): cosmetic: fix typo in osmo_ss7_vty.c VTY doc cosmetic: Fix typo in sccp_types.h sccp: add addressbook functionality for sccp addresses ss7: Fix compilation error (warning) simple-client/server: be able to decide on which ss7 instance to bind vty: Check returncode of osmo_ss7_pointcode_parse() vty: make addressbook available for _sg and _asp cosmetic: remove comment sccp: global addressbook search + api fix sccp: make simple client configurable via VTY xua: fix possible memory leak in seems osmo_ss7_asp_use_default_lm() sccp: ensure addressbook entry names are unique sccp: derive local address from given sccp instance sccp: add function to check sccp addresses sccp: fix creating of the default route in simple client vty: hide SG commands when running as ASP sccp: prefix default parameters of osmo_sccp_simple_client() sccp: fix handling of default IP addresses in osmo_sccp_simple_client() sccp: check for valid point code in osmo_sccp_simple_client() sccp: add doxgen comments for osmo_sccp_simple_client() sccp: make osmo_sccp_addr_name() available sccp: function to get sccp instance from sccp user sccp: fixup for osmo_sccp_get_ss7() vty: fix (null) string in vty config sccp: again fix handling of default IP addresses in osmo_sccp_simple_client() simple client: prevent overwriting asp settings Ruben Undheim (1): Fix for big-endian architectures ----------------------------------------------------------------------- hooks/post-receive -- SCCP Library

7 years, 8 months

libosmo-sccp.git branch master updated. 0.8.0

by gitosis＠osmocom.org

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "SCCP Library". The branch, master has been updated via d1c552bcfcd74c5a13c67524843c549645c7a535 (commit) from f6eb9c207d1a276fc68235a5ec0a8e807cb8f37a (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/libosmo-sccp/commit/?id=d1c552bcfcd74c5a13c67524843… commit d1c552bcfcd74c5a13c67524843c549645c7a535 Author: Harald Welte <laforge(a)gnumonks.org> Date: Fri Oct 27 21:50:09 2017 +0200 Tag/Release Version 0.8.0 This marks the first version of this source package that includes libosmo-sigtran and osmo-stp. Misc Changelog: * Add Doxygen API documentation * Add examples for libosmo-sigtran client and server side API * Add 'struct sccp_data_unitdata_service' for UDTS * Big endian support for sccp_src_ref_to_int() and sccp_src_ref_from_int() * Fix any unintended references to AGPL in the soruce Change-Id: I390f32f289a6b7464672e6081bc189503addb92b ----------------------------------------------------------------------- Summary of changes: debian/changelog | 6 ++++++ 1 file changed, 6 insertions(+) hooks/post-receive -- SCCP Library

7 years, 8 months

libosmo-sccp.git branch master updated. 0.0.6.3-321-gf6eb9c2

by gitosis＠osmocom.org

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "SCCP Library". The branch, master has been updated via f6eb9c207d1a276fc68235a5ec0a8e807cb8f37a (commit) from 911c08dadd35429528db86f710121885fea70d27 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/libosmo-sccp/commit/?id=f6eb9c207d1a276fc68235a5ec0… commit f6eb9c207d1a276fc68235a5ec0a8e807cb8f37a Author: Harald Welte <laforge(a)gnumonks.org> Date: Fri Oct 27 21:06:36 2017 +0200 Proper Debian packaging with split packages, -dbg, -doc, ... Change-Id: I58ce90a9b8e4fc41ceb6a112df1f4503008743a7 ----------------------------------------------------------------------- Summary of changes: debian/control | 91 +++++++++++++++++++++++++++++++++++++- debian/libosmo-sccp-dev.install | 7 +++ debian/libosmo-sigtran-dev.install | 5 +++ debian/libosmo-sigtran-doc.install | 1 + debian/libosmo-sigtran0.install | 1 + debian/osmo-stp.install | 1 + debian/osmo-stp.service | 1 + debian/rules | 20 +++++++-- 8 files changed, 123 insertions(+), 4 deletions(-) create mode 100644 debian/libosmo-sccp-dev.install create mode 100644 debian/libosmo-sigtran-dev.install create mode 100644 debian/libosmo-sigtran-doc.install create mode 100644 debian/libosmo-sigtran0.install create mode 100644 debian/osmo-stp.install create mode 120000 debian/osmo-stp.service hooks/post-receive -- SCCP Library

7 years, 8 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

osmocom-commitlog