osmocom-commitlog August 2017

osmocom-commitlog@lists.osmocom.org

1 participants
244 discussions

Start a nNew thread

openbsc.git branch pmaier/aoip3 updated. 0.15.0-933-g8f1d1fc2a

by gitosis＠osmocom.org

8 years

osmo-iuh.git branch pre_release updated. 2627a983408cacb58b0a21ddcd6b737a2a72bdac

by gitosis＠osmocom.org

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Osmocom code for Iuh interface". The branch, pre_release has been updated discards 9b9ad6623dff4913f5cac057f435dcae9718944a (commit) discards d5a564775f84814edf23358e9330da13acc90408 (commit) via 2627a983408cacb58b0a21ddcd6b737a2a72bdac (commit) via f4ed50c78263ac20cad27494e7b30636dcdc960f (commit) via aae68b2791c636b6a58068bb43cf4c01cfd86c5d (commit) via 13850b1e5dc10975bf0452d2b8290bdbe2a8356f (commit) via a3bcd6d1e71e866fa96a40437aeff9a6e44c76a2 (commit) This update added new revisions after undoing existing revisions. That is to say, the old revision is not a strict subset of the new revision. This situation occurs when you --force push a change and generate a repository containing something like this: * -- * -- B -- O -- O -- O (9b9ad6623dff4913f5cac057f435dcae9718944a) \ N -- N -- N (2627a983408cacb58b0a21ddcd6b737a2a72bdac) When this happens we assume that you've already had alert emails for all of the O revisions, and so we here report only the revisions in the N branch from the common base, B. Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-iuh/commit/?id=2627a983408cacb58b0a21ddcd6b737… commit 2627a983408cacb58b0a21ddcd6b737a2a72bdac Author: Neels Hofmeyr <nhofmeyr(a)sysmocom.de> Date: Thu Jul 27 14:37:03 2017 +0200 apply ctx arg to osmo_ss7_vty_init_asp() Depends: libosmo-sccp Id4e7f47979001f7856b0b3665c9e94982e75e490 Change-Id: Idccbdc669d740179153d0a73096745785bd2f5af http://cgit.osmocom.org/osmo-iuh/commit/?id=f4ed50c78263ac20cad27494e7b3063… commit f4ed50c78263ac20cad27494e7b30636dcdc960f Author: Neels Hofmeyr <nhofmeyr(a)sysmocom.de> Date: Mon Jul 31 13:13:24 2017 +0200 make point codes configurable by SCCP address book In the vty config, use the SCCP address book to configure the local and remote SCCP addresses. Add VTY commands to set the remote SCCP addresses by name, derive the ss7 instance from these addresses: cs7 instance 1 point-code 0.23.0 sccp-address msc point-code 0.0.1 sccp-address sgsn point-code 0.0.2 hnbgw iucs remote-addr msc iups remote-addr sgsn Enforce that both IuCS and IuPS use the same ss7 instance. In the future, we may add the feature to use two separate instances. Depends: libosmo-sccp I75c67d289693f1c2a049ac61cf2b2097d6e5687d, Ie1aedd7894acd69ddc887cd65a8a0df4b888838c, I85b46269dbe7909e52873ace3f720f6292a4516c Change-Id: I33a7ba11eb7c2d9a5dc74d10fb0cf04bf664477b ----------------------------------------------------------------------- Summary of changes: include/osmocom/iuh/hnbgw.h | 12 ++-- include/osmocom/iuh/hnbgw_cn.h | 3 +- src/hnbgw.c | 22 +------- src/hnbgw_cn.c | 123 +++++++++++++++++++++++++++++++++++------ src/hnbgw_rua.c | 4 +- src/hnbgw_vty.c | 74 +++++++++---------------- 6 files changed, 143 insertions(+), 95 deletions(-) hooks/post-receive -- Osmocom code for Iuh interface

8 years

openbsc.git branch pmaier/aoip3 updated. 0.15.0-932-gc7ee7cc7c

by gitosis＠osmocom.org

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Legacy: The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)". The branch, pmaier/aoip3 has been updated via c7ee7cc7c57c7c6181eab52cb05b451cbe52aff3 (commit) via 2515fb8c598ed5ede26f9f3cf4b42d662b531154 (commit) from c54a5f3d69c18b7b9cc236eca5b8ef8ad7481f34 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/openbsc/commit/?id=c7ee7cc7c57c7c6181eab52cb05b451c… commit c7ee7cc7c57c7c6181eab52cb05b451cbe52aff3 Author: Philipp Maier <pmaier(a)sysmocom.de> Date: Mon Aug 7 17:34:55 2017 +0200 osmo-msc: Use proper sccp instance names If the user chooses to use a single sccp instance to connect to the core network. That instance would be named OsmoMSC-Iu. This is confusing because that same connection would also serve all A interface traffic. This patch checks for the described condition and picks a more suitable name then. http://cgit.osmocom.org/openbsc/commit/?id=2515fb8c598ed5ede26f9f3cf4b42d66… commit 2515fb8c598ed5ede26f9f3cf4b42d662b531154 Author: Philipp Maier <pmaier(a)sysmocom.de> Date: Mon Aug 7 17:23:16 2017 +0200 osmo-bsc: improve checking of sccp addresses Use the check functionality of libosmo-sigtran to test if the sccp addresses are smantically correct. ----------------------------------------------------------------------- Summary of changes: openbsc/include/openbsc/bsc_msc_data.h | 1 + openbsc/src/osmo-bsc/osmo_bsc_sigtran.c | 20 ++++++++------------ openbsc/src/osmo-bsc/osmo_bsc_vty.c | 22 ++++++++++++++++++++++ openbsc/src/osmo-msc/msc_main.c | 18 +++++++++++++++--- 4 files changed, 46 insertions(+), 15 deletions(-) hooks/post-receive -- Legacy: The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)

8 years

libosmo-sccp.git branch pre_release created. 0.0.6.3-284-gad2db7a

by gitosis＠osmocom.org

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "SCCP Library". The branch, pre_release has been created at ad2db7aedd625da964c6856056fcd16519dbc3b7 (commit) - Log ----------------------------------------------------------------- http://cgit.osmocom.org/libosmo-sccp/commit/?id=ad2db7aedd625da964c6856056f… commit ad2db7aedd625da964c6856056fcd16519dbc3b7 Author: Neels Hofmeyr <nhofmeyr(a)sysmocom.de> Date: Thu Jul 27 17:33:06 2017 +0200 cosmetic: ws in log Change-Id: If5a56ec170d4e91ce070f6fa9c9cfe5bbc121186 http://cgit.osmocom.org/libosmo-sccp/commit/?id=fd63ccca545fdeebd2a621ac41f… commit fd63ccca545fdeebd2a621ac41fc5f5d9c1b2d80 Author: Neels Hofmeyr <nhofmeyr(a)sysmocom.de> Date: Wed Jul 26 18:15:47 2017 +0200 sccp_helpers: check buf len in append_to_buf() Change-Id: I2e6d656871f952be8e719573fedf2154832841d7 http://cgit.osmocom.org/libosmo-sccp/commit/?id=75ed8def84103db9a3ae22d5ebc… commit 75ed8def84103db9a3ae22d5ebce8d2cb84aacc8 Author: Neels Hofmeyr <nhofmeyr(a)sysmocom.de> Date: Thu Jul 27 13:53:03 2017 +0200 sccp-addr vty: set RI to SSN_PC when setting a point-code Change-Id: I75c67d289693f1c2a049ac61cf2b2097d6e5687d http://cgit.osmocom.org/libosmo-sccp/commit/?id=b75258e51a4efb6cff2f3e956b5… commit b75258e51a4efb6cff2f3e956b50fa020233c6c2 Author: Neels Hofmeyr <nhofmeyr(a)sysmocom.de> Date: Thu Jul 27 15:22:06 2017 +0200 fix osmo_sccp_addr_dump(): actually print RI Adjust xua_test accordingly. Change-Id: I93e0aa706867e7b1de7f7a6071e3c8af89772af0 http://cgit.osmocom.org/libosmo-sccp/commit/?id=3c3f70a2457f437f07836280eae… commit 3c3f70a2457f437f07836280eaebe9f5c6a7514c Author: Neels Hofmeyr <nhofmeyr(a)sysmocom.de> Date: Wed Jul 26 18:07:53 2017 +0200 add osmo_sccp_addr_name() and three value_string[]s osmo_sccp_addr_dump() just prints the raw values. In osmo_sccp_addr_name(), use osmo_ss7_pointcode_print() and newly added RI, SSN and GT value_string[] to print more human readable log output. Change-Id: Ie1aedd7894acd69ddc887cd65a8a0df4b888838c http://cgit.osmocom.org/libosmo-sccp/commit/?id=02f7c45b69c9f2d71b34eef059a… commit 02f7c45b69c9f2d71b34eef059a43929a831d65e Author: Neels Hofmeyr <nhofmeyr(a)sysmocom.de> Date: Thu Jul 27 13:51:46 2017 +0200 introduce OSMO_SCCP_RI_NONE to indicate unset RI Allows to automatically set an RI in future change I75c67d289693f1c2a049ac61cf2b2097d6e5687d "sccp-addr vty: set RI to SSN_PC when setting a point-code" Change-Id: I6e2f31b023b08cba2f2ee8234e6108efcaca41c0 http://cgit.osmocom.org/libosmo-sccp/commit/?id=b35f6d1c1e81a3d4187915234ca… commit b35f6d1c1e81a3d4187915234ca332fc26a0858b Author: Neels Hofmeyr <nhofmeyr(a)sysmocom.de> Date: Thu Jul 27 13:50:31 2017 +0200 constify ss7_instance arg of osmo_ss7_pointcode_print() Change-Id: I8c6b7188d004033e75e9c41f4a65c418d13a79c5 http://cgit.osmocom.org/libosmo-sccp/commit/?id=06956848a3ec1b64c6bb3d71abd… commit 06956848a3ec1b64c6bb3d71abde8db44440d80f Author: Neels Hofmeyr <nhofmeyr(a)sysmocom.de> Date: Wed Jul 26 17:31:53 2017 +0200 ensure valid primary_pc in osmo_ss7_instance Add osmo_ss7_instance.cfg.primary_pc_valid flag. Adjust all code paths setting primary_pc to also set primary_pc_valid. Adjust all code paths using primary_pc to ensure it is indeed valid. Rationale: It looks like we are going to use the primary point-code of an SS7 instance to derive a local SCCP address, e.g. for osmo-bsc and osmo-hnbgw. cs7-instance 1 point-code 1.2.3 ! sets osmo_ss7_instance.primary_pc = 1.2.3 sccp-address msc point-code 0.0.1 routing-indicator PC hnb iucs remote-addr msc ! derives cs7 instance 1 and local pc 1.2.3 If 'point-code 1.2.3' is omitted, this becomes '0.0.0' without the user noticing, and this happens for each client that omits it. I would like to barf when no local PC is set, but since 0 is apparently a valid point-code and osmo_ss7_instance.primary_pc is a uint32_t, we have no way to tell whether the user supplied a point-code or not. Currently, in osmo_ss7_vty.c we had "if (inst->cfg.primary_pc)" suggesting 0 is invalid, but in struct osmo_sccp_user we have flag pc_valid suggesting 0 is indeed valid. I chose to adopt a primary_pc_valid flag like osmo_sccp_user. Change-Id: I7f0f0c89b7335d9da24161bfac8234be214ca00c http://cgit.osmocom.org/libosmo-sccp/commit/?id=41b6803fd5d69b3a0f126e75d77… commit 41b6803fd5d69b3a0f126e75d7734425c57644ee Author: Neels Hofmeyr <nhofmeyr(a)sysmocom.de> Date: Thu Jul 27 14:33:46 2017 +0200 osmo_ss7_vty_init: ensure a talloc ctx is set by user Drop the separate osmo_ss7_set_vty_alloc_ctx() because we are likely to forget calling it. Instead, incorporate into osmo_ss7_vty_init_*() with a new ctx arg, and set the static context var in vty_init_shared(). Change-Id: Id4e7f47979001f7856b0b3665c9e94982e75e490 http://cgit.osmocom.org/libosmo-sccp/commit/?id=473048d0d26f2ac06eec5ce6346… commit 473048d0d26f2ac06eec5ce6346967eb293492be Author: Neels Hofmeyr <nhofmeyr(a)sysmocom.de> Date: Thu Jul 27 13:51:20 2017 +0200 add osmo_sccp_addr_set_ssn() Will be used by e.g. osmo-hnbgw to add an SSN to addresses obtained from the sccp address book. Change-Id: I85b46269dbe7909e52873ace3f720f6292a4516c ----------------------------------------------------------------------- hooks/post-receive -- SCCP Library

8 years

osmo-iuh.git branch master updated. aae68b2791c636b6a58068bb43cf4c01cfd86c5d

by gitosis＠osmocom.org

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Osmocom code for Iuh interface". The branch, master has been updated via aae68b2791c636b6a58068bb43cf4c01cfd86c5d (commit) from 13850b1e5dc10975bf0452d2b8290bdbe2a8356f (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-iuh/commit/?id=aae68b2791c636b6a58068bb43cf4c0… commit aae68b2791c636b6a58068bb43cf4c01cfd86c5d Author: Neels Hofmeyr <nhofmeyr(a)sysmocom.de> Date: Wed Jul 5 14:38:52 2017 +0200 move openbsc.git's iu.h, iu.c, iu_vty.c here as iu_client To help split openbsc.git to separate MSC and SGSN repositories, place the common Iu interface related code here in libosmo-ranap. Also apply various improvements while moving (from intermittent code review). The code depends on libosmo-ranap tightly. One reason to want this separate from libosmo-ranap could be that it uses libosmo-sigtran, accepting an sccp instance. However, including in libosmo-ranap is the simplest way to go. The osmo-iuh build depends on libosmo-sigtran anyway because of OsmoHNBGW, and all current users of libosmo-ranap also naturally link libosmo-sigtran already. Apply prefix ranap_iu_ and RANAP_IU_ to allow smooth transition from the openbsc.git iu_ to the libranap ranap_iu_ implementations. Prune unneeded #include statements. Instead of sccp_addr, store an rnc pointer in the ue_conn_ctx. To facilitate, also: - Move iu_rnc struct to iu_client.h (as ranap_iu_rnc). - Instead of sccp_addr, pass rnc to ue_conn_ctx_alloc(). - Pass a local struct new_ue_conn_ctx containing the sccp_addr and conn_id up the RANAP handling stack in case of an InitialUE message. - Separate the InitialUE message handling from cn_ranap_handle_co(), by moving to new and separate cn_ranap_handle_co_initial(), so we can still pass a looked-up ue_conn_ctx to all other cn_ranap_handle_co() code paths. - Allocate the ue_conn_ctx only in ranap_handle_co_initial_ue(), not as early as before. Note that we are not actually ever using the rnc pointer now present in ue_conn_ctx. It could be used for more concise paging, to first page only the RNC where we last saw the subscriber. So far we page all matching LAC/RACs. Tweak error logging: use __func__ instead of writing the function names as string constants. In iu_client_vty.c: - Move the asn.1 debug commands from logging over to the iu node. They are not specific to the logging target. They could qualify for an entirely separate 'asn1' root node, but for simplicity place under 'iu'. - Add the 'asn1' commands to ranap_iu_vty_config_write(), so far missing. - remove the legacy "net." from a VTY error message, it is not known which name the parent node of 'iu' has. Depends: libosmo-sccp I85b46269dbe7909e52873ace3f720f6292a4516c, libosmo-sccp Ie1aedd7894acd69ddc887cd65a8a0df4b888838c Change-Id: I6a3f7ad15be03fb94689b4af6ccfa828c25f45c0 ----------------------------------------------------------------------- Summary of changes: include/osmocom/ranap/Makefile.am | 1 + include/osmocom/ranap/iu_client.h | 74 ++++ src/Makefile.am | 2 +- src/iu_client.c | 783 ++++++++++++++++++++++++++++++++++++++ src/iu_client_vty.c | 140 +++++++ 5 files changed, 999 insertions(+), 1 deletion(-) create mode 100644 include/osmocom/ranap/iu_client.h create mode 100644 src/iu_client.c create mode 100644 src/iu_client_vty.c hooks/post-receive -- Osmocom code for Iuh interface

8 years

osmo-iuh.git branch master updated. 13850b1e5dc10975bf0452d2b8290bdbe2a8356f

by gitosis＠osmocom.org

8 years

openggsn.git branch laforge/ipv6 updated. 0.93-17-g5a0f66a

by gitosis＠osmocom.org

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "The OpenGGSN project". The branch, laforge/ipv6 has been updated discards f3e096d8d0204ca61c255d2263e6675d9cc430da (commit) discards d2525908fdc7828aff670214c17e06a9f72ba8d9 (commit) discards 00f58d2118a4298df079bbd0ca2a01226e1684b7 (commit) discards b242b81671181e1098286e26e338e88b1e712944 (commit) discards 5f2722668014514e304f91057859dc42c7d044f1 (commit) discards bcae79b00e19f74a719d12887070de9f19f18701 (commit) via 5a0f66a434bc519383896633004f008292183e4b (commit) via 6a2019bd92acd18fd13eab03fcfd93e2a0c4f3d6 (commit) via 178fd5d3550b27260b13ff60de8cd8b025103cd9 (commit) via baacf9e139aae66dbb737bb6e4e305e3c2a73f64 (commit) via 990af295af29f0cb115a8ac0bc7fd19ae13dbd12 (commit) via 0483ee86e2e5cc3581bdb952ce85235386c8f4f2 (commit) via d9d8862a58702ba71b5194faa01ecf1eb234519c (commit) This update added new revisions after undoing existing revisions. That is to say, the old revision is not a strict subset of the new revision. This situation occurs when you --force push a change and generate a repository containing something like this: * -- * -- B -- O -- O -- O (f3e096d8d0204ca61c255d2263e6675d9cc430da) \ N -- N -- N (5a0f66a434bc519383896633004f008292183e4b) When this happens we assume that you've already had alert emails for all of the O revisions, and so we here report only the revisions in the N branch from the common base, B. Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/openggsn/commit/?id=5a0f66a434bc519383896633004f008… commit 5a0f66a434bc519383896633004f008292183e4b Author: Harald Welte <laforge(a)gnumonks.org> Date: Thu Aug 3 00:47:03 2017 +0200 Support setting TUN device IPv6 address + prefix As we can now have PDP contexts with IPv6 user IP payload, it is useful to extend the TUN related code to be able to configure the tun device IPv6 address + prefix length Change-Id: I899d21e52d02e0b8384af29ddd489ff19c8f2cf6 http://cgit.osmocom.org/openggsn/commit/?id=6a2019bd92acd18fd13eab03fcfd93e… commit 6a2019bd92acd18fd13eab03fcfd93e2a0c4f3d6 Author: Harald Welte <laforge(a)gnumonks.org> Date: Thu Aug 3 00:00:23 2017 +0200 ggsn: Send proper errors in create_context_ind() When we receive PDP context requests for unknown PDP types or if we run out of dynamic addresses, we need to inform the SGSN that PDP context creation failed. Change-Id: Ibf199c1726130d27c8f80230b30ee51101c93b06 http://cgit.osmocom.org/openggsn/commit/?id=178fd5d3550b27260b13ff60de8cd8b… commit 178fd5d3550b27260b13ff60de8cd8b025103cd9 Author: Harald Welte <laforge(a)gnumonks.org> Date: Wed Aug 2 21:48:16 2017 +0200 IPv6 support for user IP This patch enables the use of IPv6 PDP contexts. The phone will have to request an IPv6 End-user-Address, and the GGSN will have to be configured for an IPv6 pool. The outer transport-layer IP between SGSN and GGSN must still be IPv4, it is not modified by this patch Change-Id: I22c3bf32a98e5daf99d6eaeac8c9f95cc7574774 http://cgit.osmocom.org/openggsn/commit/?id=baacf9e139aae66dbb737bb6e4e305e… commit baacf9e139aae66dbb737bb6e4e305e3c2a73f64 Author: Harald Welte <laforge(a)gnumonks.org> Date: Wed Aug 2 22:58:54 2017 +0200 ippool_new(): const-ify input arguments Change-Id: If3e53584e8c9c1f06bba4c183c9fd65fae913904 http://cgit.osmocom.org/openggsn/commit/?id=990af295af29f0cb115a8ac0bc7fd19… commit 990af295af29f0cb115a8ac0bc7fd19ae13dbd12 Author: Harald Welte <laforge(a)gnumonks.org> Date: Wed Aug 2 21:10:09 2017 +0200 lib/tun.h: Remove non-endian-safe redefinition of IP header We can simply use 'struct iphdr' from netinet/ip.h to achieve the same goal (and be portable). Change-Id: Ieece22e127dc14a7ffdc3b05656628989ad00b32 http://cgit.osmocom.org/openggsn/commit/?id=0483ee86e2e5cc3581bdb952ce85235… commit 0483ee86e2e5cc3581bdb952ce85235386c8f4f2 Author: Harald Welte <laforge(a)gnumonks.org> Date: Wed Aug 2 19:49:47 2017 +0200 ippool: Add IPv6 support to IP pool implementation Change-Id: Ib98cc4bf634d6be9a7bf8c03a24e629455fcafc8 http://cgit.osmocom.org/openggsn/commit/?id=d9d8862a58702ba71b5194faa01ecf1… commit d9d8862a58702ba71b5194faa01ecf1eb234519c Author: Harald Welte <laforge(a)gnumonks.org> Date: Fri Aug 4 00:22:35 2017 +0200 Proper fix for "Force Dynamic IP" in Create PDP CTX An EUA length of *2* octets indicates dynamic IP address, while an EUA length of 0 is invalid. Let's fix this hack (which needs to finally be removed anyway). Change-Id: Ib1b57eb0654327882044d6862d955f4b32aa6bcd ----------------------------------------------------------------------- Summary of changes: ggsn/ggsn.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) hooks/post-receive -- The OpenGGSN project

8 years

osmocom-bb.git branch fixeria/fake_trx updated. osmocon_v0.0.0-1872-g2ae2660c

by gitosis＠osmocom.org

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "The Open Source GSM Base Band stack". The branch, fixeria/fake_trx has been updated via 2ae2660cea8680bc2d0f9025b7a0f00161ffabe7 (commit) via 65edbe162851014d44e47599f0ad5c2de1f83eef (commit) via 219a81fd2a346bea43ec37abfa7b3a4e147212d8 (commit) via d3f88a9706640bc43e9594d48add2b22a9978a39 (commit) via a9ebb1c5909159917b749ab018d45bf6a11c5925 (commit) via af2db992186451247efe9f1ea4eba3dcfa75545d (commit) via 28b7c18e4465453ad3475a6cbdb0cba659a40c69 (commit) via 2acf325a9ad3118eba45cdc3fd4e514ec52bf238 (commit) via 11ca1abae64ee658f7cf4aa1150b9cd341a717ed (commit) via 5945fdf8dd5acdb486e534ea07ec7552cec9e6cb (commit) via 697b8cd2aab111b50fbd23f75cfdadbbdeec1d09 (commit) via 05a1027dd4d2678cba2dd316cb1d43d1aad16c64 (commit) from 40bc28d00102ddbedb572de4d02d89139f47792f (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmocom-bb/commit/?id=2ae2660cea8680bc2d0f9025b7a0f… commit 2ae2660cea8680bc2d0f9025b7a0f00161ffabe7 Author: Vadim Yanitskiy <axilirator(a)gmail.com> Date: Thu Aug 3 20:00:12 2017 +0600 fake_trx: whitespace fix Change-Id: Iad2be36777e4a2454e181c856c7902574a4ab20c http://cgit.osmocom.org/osmocom-bb/commit/?id=65edbe162851014d44e47599f0ad5… commit 65edbe162851014d44e47599f0ad5c2de1f83eef Author: Vadim Yanitskiy <axilirator(a)gmail.com> Date: Thu Aug 3 19:51:57 2017 +0600 fake_trx: separate DataInterface from burst_gen.py Change-Id: I325cf2ae59ef8834c2ddfb67206eede44d1e0acf http://cgit.osmocom.org/osmocom-bb/commit/?id=219a81fd2a346bea43ec37abfa7b3… commit 219a81fd2a346bea43ec37abfa7b3a4e147212d8 Author: Vadim Yanitskiy <axilirator(a)gmail.com> Date: Thu Aug 3 19:34:39 2017 +0600 fake_trx: add options to specify fn, tn and pwr Change-Id: Ifd4f4864707596a69fece11218a4800b98551c31 http://cgit.osmocom.org/osmocom-bb/commit/?id=d3f88a9706640bc43e9594d48add2… commit d3f88a9706640bc43e9594d48add2b22a9978a39 Author: Vadim Yanitskiy <axilirator(a)gmail.com> Date: Mon Jul 31 20:06:36 2017 +0600 host/trxcon/scheduler: clean up some includes Change-Id: I47e3b953b80f4f822d563579d15498181009ca80 http://cgit.osmocom.org/osmocom-bb/commit/?id=a9ebb1c5909159917b749ab018d45… commit a9ebb1c5909159917b749ab018d45bf6a11c5925 Author: Vadim Yanitskiy <axilirator(a)gmail.com> Date: Mon Jul 31 17:24:27 2017 +0600 host/trxcon/scheduler: share common code for lchan handlers The training sequences array is currently used by xCCH handlers, but will be also used for handling both TCH/F and TCH/H bursts. Moreover the code that forwards decoded L2 payloads to L1CTL protocol handlers was separated into a new shared function. Change-Id: I34c3de351362ebd9a070f49bb78d7bd976784b04 http://cgit.osmocom.org/osmocom-bb/commit/?id=af2db992186451247efe9f1ea4eba… commit af2db992186451247efe9f1ea4eba3dcfa75545d Author: Vadim Yanitskiy <axilirator(a)gmail.com> Date: Mon Jul 31 15:00:15 2017 +0600 host/trxcon/l1ctl.c: make l1ctl_tx_data_ind flexible Now this function can send both DATA and TRAFFIC indications. Change-Id: I945c10c317155917b6e6ce9d663d9cb46f2e085c http://cgit.osmocom.org/osmocom-bb/commit/?id=28b7c18e4465453ad3475a6cbdb0c… commit 28b7c18e4465453ad3475a6cbdb0cba659a40c69 Author: Vadim Yanitskiy <axilirator(a)gmail.com> Date: Mon Jul 31 14:03:51 2017 +0600 host/trxcon/scheduler: get rid of useless nbits argument Change-Id: I8508676e2cb347396c6ca6b394f13113f3e63084 http://cgit.osmocom.org/osmocom-bb/commit/?id=2acf325a9ad3118eba45cdc3fd4e5… commit 2acf325a9ad3118eba45cdc3fd4e514ec52bf238 Author: Vadim Yanitskiy <axilirator(a)gmail.com> Date: Mon Jul 31 13:27:30 2017 +0600 host/trxcon/scheduler: pass trx_lchan_state to lchan handlers It's better to pass a trx_lchan_state instance directly from caller to lchan handler instead of passing trx_lchan_type. This way a handler wouldn't need to find lchan itself. Change-Id: I47a40542b03ab31da12b0abb1c263c83662ff018 http://cgit.osmocom.org/osmocom-bb/commit/?id=11ca1abae64ee658f7cf4aa1150b9… commit 11ca1abae64ee658f7cf4aa1150b9cd341a717ed Author: Vadim Yanitskiy <axilirator(a)gmail.com> Date: Sat Jul 29 23:43:52 2017 +0600 host/trxcon/scheduler: fix chan_nr parsing Previously, the chan_nr, received from L2, was parsed in a wrong way, so in some cases only one logical channel was activated or some messages (such as Measurement Requests) were sent on incorrect channel (e.g. on SDCCH instead of SACCH). This change reimplements the sched_trx_chan_nr2lchan_type(), and introduces a new function sched_trx_set_lchans(), whics will parse chan_nr and (de)activate required channels. Change-Id: I480311c65ef93bbc1644ec708dd2a68fd33091e0 http://cgit.osmocom.org/osmocom-bb/commit/?id=5945fdf8dd5acdb486e534ea07ec7… commit 5945fdf8dd5acdb486e534ea07ec7552cec9e6cb Author: Vadim Yanitskiy <axilirator(a)gmail.com> Date: Fri Jul 28 16:03:05 2017 +0600 host/trxcon/scheduler: ignore incomplete sets of bursts To be able to decode one xCCH message, it's required to have all set of bursts collected (4/4). Otherwise we should not even try to decode an incomplete set. Change-Id: Iaa63462efe19b8e96102fc8c8d8c968a2df2c70e http://cgit.osmocom.org/osmocom-bb/commit/?id=697b8cd2aab111b50fbd23f75cfda… commit 697b8cd2aab111b50fbd23f75cfdadbbdeec1d09 Author: Vadim Yanitskiy <axilirator(a)gmail.com> Date: Fri Jul 28 15:53:59 2017 +0600 host/trxcon/scheduler: drop a meaningless FIXME label Change-Id: If5497f4fdce22e986f46725cc1575a1e809ccdab http://cgit.osmocom.org/osmocom-bb/commit/?id=05a1027dd4d2678cba2dd316cb1d4… commit 05a1027dd4d2678cba2dd316cb1d43d1aad16c64 Author: Vadim Yanitskiy <axilirator(a)gmail.com> Date: Fri Jul 28 15:36:44 2017 +0600 host/trxcon/scheduler: use 'tn' instead of 'ts_num' The new timeslot index designation is more generic for Osmocom projects, so let's use one. Change-Id: I8c0118aad439816148490e57938d7e32b6e20877 ----------------------------------------------------------------------- Summary of changes: src/host/trxcon/Makefile.am | 1 + src/host/trxcon/l1ctl.c | 45 +++++++------ src/host/trxcon/l1ctl.h | 3 +- src/host/trxcon/sched_lchan_common.c | 114 ++++++++++++++++++++++++++++++++ src/host/trxcon/sched_lchan_desc.c | 14 ++-- src/host/trxcon/sched_lchan_rach.c | 7 +- src/host/trxcon/sched_lchan_sch.c | 10 ++- src/host/trxcon/sched_lchan_xcch.c | 116 ++++++-------------------------- src/host/trxcon/sched_mframe.c | 4 +- src/host/trxcon/sched_trx.c | 68 +++++++++++++++---- src/host/trxcon/sched_trx.h | 28 ++++---- src/target/fake_trx/burst_gen.py | 120 ++++++++++------------------------ src/target/fake_trx/data_if.py | 107 ++++++++++++++++++++++++++++++ src/target/fake_trx/rand_burst_gen.py | 10 +-- 14 files changed, 391 insertions(+), 256 deletions(-) create mode 100644 src/host/trxcon/sched_lchan_common.c create mode 100644 src/target/fake_trx/data_if.py hooks/post-receive -- The Open Source GSM Base Band stack

8 years

openggsn.git branch laforge/ipv6 updated. 0.93-16-gf3e096d

by gitosis＠osmocom.org

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "The OpenGGSN project". The branch, laforge/ipv6 has been updated discards fed366e34fd650dec5f1fe8fbdb56ac50985d91d (commit) discards 109c14c2fab9554a8ec90f1df13f03f6f824d251 (commit) discards 88a37ce7021cab973c3ef09549b1b915ca766d99 (commit) discards e1f4ce3bf26435d7c53dd0ae43b9a5cde765b7f8 (commit) discards 68295b2b9a4c790bb653b97f033482c1fbbc5368 (commit) discards ef761f64753e9dc344148383db42d5235123405c (commit) via f3e096d8d0204ca61c255d2263e6675d9cc430da (commit) via d2525908fdc7828aff670214c17e06a9f72ba8d9 (commit) via 00f58d2118a4298df079bbd0ca2a01226e1684b7 (commit) via b242b81671181e1098286e26e338e88b1e712944 (commit) via 5f2722668014514e304f91057859dc42c7d044f1 (commit) via bcae79b00e19f74a719d12887070de9f19f18701 (commit) This update added new revisions after undoing existing revisions. That is to say, the old revision is not a strict subset of the new revision. This situation occurs when you --force push a change and generate a repository containing something like this: * -- * -- B -- O -- O -- O (fed366e34fd650dec5f1fe8fbdb56ac50985d91d) \ N -- N -- N (f3e096d8d0204ca61c255d2263e6675d9cc430da) When this happens we assume that you've already had alert emails for all of the O revisions, and so we here report only the revisions in the N branch from the common base, B. Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/openggsn/commit/?id=f3e096d8d0204ca61c255d2263e6675… commit f3e096d8d0204ca61c255d2263e6675d9cc430da Author: Harald Welte <laforge(a)gnumonks.org> Date: Thu Aug 3 00:47:03 2017 +0200 Support setting TUN device IPv6 address + prefix As we can now have PDP contexts with IPv6 user IP payload, it is useful to extend the TUN related code to be able to configure the tun device IPv6 address + prefix length Change-Id: I899d21e52d02e0b8384af29ddd489ff19c8f2cf6 http://cgit.osmocom.org/openggsn/commit/?id=d2525908fdc7828aff670214c17e06a… commit d2525908fdc7828aff670214c17e06a9f72ba8d9 Author: Harald Welte <laforge(a)gnumonks.org> Date: Thu Aug 3 00:00:23 2017 +0200 ggsn: Send proper errors in create_context_ind() When we receive PDP context requests for unknown PDP types or if we run out of dynamic addresses, we need to inform the SGSN that PDP context creation failed. Change-Id: Ibf199c1726130d27c8f80230b30ee51101c93b06 http://cgit.osmocom.org/openggsn/commit/?id=00f58d2118a4298df079bbd0ca2a012… commit 00f58d2118a4298df079bbd0ca2a01226e1684b7 Author: Harald Welte <laforge(a)gnumonks.org> Date: Wed Aug 2 21:48:16 2017 +0200 IPv6 support for user IP This patch enables the use of IPv6 PDP contexts. The phone will have to request an IPv6 End-user-Address, and the GGSN will have to be configured for an IPv6 pool. The outer transport-layer IP between SGSN and GGSN must still be IPv4, it is not modified by this patch Change-Id: I22c3bf32a98e5daf99d6eaeac8c9f95cc7574774 http://cgit.osmocom.org/openggsn/commit/?id=b242b81671181e1098286e26e338e88… commit b242b81671181e1098286e26e338e88b1e712944 Author: Harald Welte <laforge(a)gnumonks.org> Date: Wed Aug 2 22:58:54 2017 +0200 ippool_new(): const-ify input arguments Change-Id: If3e53584e8c9c1f06bba4c183c9fd65fae913904 http://cgit.osmocom.org/openggsn/commit/?id=5f2722668014514e304f91057859dc4… commit 5f2722668014514e304f91057859dc42c7d044f1 Author: Harald Welte <laforge(a)gnumonks.org> Date: Wed Aug 2 21:10:09 2017 +0200 lib/tun.h: Remove non-endian-safe redefinition of IP header We can simply use 'struct iphdr' from netinet/ip.h to achieve the same goal (and be portable). Change-Id: Ieece22e127dc14a7ffdc3b05656628989ad00b32 http://cgit.osmocom.org/openggsn/commit/?id=bcae79b00e19f74a719d12887070de9… commit bcae79b00e19f74a719d12887070de9f19f18701 Author: Harald Welte <laforge(a)gnumonks.org> Date: Wed Aug 2 19:49:47 2017 +0200 ippool: Add IPv6 support to IP pool implementation Change-Id: Ib98cc4bf634d6be9a7bf8c03a24e629455fcafc8 ----------------------------------------------------------------------- Summary of changes: configure.ac | 6 ++++++ lib/ippool.c | 3 +-- lib/tun.h | 26 ++++++++++++++++++++++++++ 3 files changed, 33 insertions(+), 2 deletions(-) hooks/post-receive -- The OpenGGSN project

8 years

openggsn.git branch laforge/ipv6 created. 0.93-16-gfed366e

by gitosis＠osmocom.org

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "The OpenGGSN project". The branch, laforge/ipv6 has been created at fed366e34fd650dec5f1fe8fbdb56ac50985d91d (commit) - Log ----------------------------------------------------------------- http://cgit.osmocom.org/openggsn/commit/?id=fed366e34fd650dec5f1fe8fbdb56ac… commit fed366e34fd650dec5f1fe8fbdb56ac50985d91d Author: Harald Welte <laforge(a)gnumonks.org> Date: Thu Aug 3 00:47:03 2017 +0200 Support setting TUN device IPv6 address + prefix As we can now have PDP contexts with IPv6 user IP payload, it is useful to extend the TUN related code to be able to configure the tun device IPv6 address + prefix length Change-Id: I899d21e52d02e0b8384af29ddd489ff19c8f2cf6 http://cgit.osmocom.org/openggsn/commit/?id=109c14c2fab9554a8ec90f1df13f03f… commit 109c14c2fab9554a8ec90f1df13f03f6f824d251 Author: Harald Welte <laforge(a)gnumonks.org> Date: Thu Aug 3 00:00:23 2017 +0200 ggsn: Send proper errors in create_context_ind() When we receive PDP context requests for unknown PDP types or if we run out of dynamic addresses, we need to inform the SGSN that PDP context creation failed. Change-Id: Ibf199c1726130d27c8f80230b30ee51101c93b06 http://cgit.osmocom.org/openggsn/commit/?id=88a37ce7021cab973c3ef09549b1b91… commit 88a37ce7021cab973c3ef09549b1b915ca766d99 Author: Harald Welte <laforge(a)gnumonks.org> Date: Wed Aug 2 21:48:16 2017 +0200 IPv6 support for user IP This patch enables the use of IPv6 PDP contexts. The phone will have to request an IPv6 End-user-Address, and the GGSN will have to be configured for an IPv6 pool. The outer transport-layer IP between SGSN and GGSN must still be IPv4, it is not modified by this patch Change-Id: I22c3bf32a98e5daf99d6eaeac8c9f95cc7574774 http://cgit.osmocom.org/openggsn/commit/?id=e1f4ce3bf26435d7c53dd0ae43b9a5c… commit e1f4ce3bf26435d7c53dd0ae43b9a5cde765b7f8 Author: Harald Welte <laforge(a)gnumonks.org> Date: Wed Aug 2 22:58:54 2017 +0200 ippool_new(): const-ify input arguments Change-Id: If3e53584e8c9c1f06bba4c183c9fd65fae913904 http://cgit.osmocom.org/openggsn/commit/?id=68295b2b9a4c790bb653b97f033482c… commit 68295b2b9a4c790bb653b97f033482c1fbbc5368 Author: Harald Welte <laforge(a)gnumonks.org> Date: Wed Aug 2 21:10:09 2017 +0200 lib/tun.h: Remove non-endian-safe redefinition of IP header We can simply use 'struct iphdr' from netinet/ip.h to achieve the same goal (and be portable). Change-Id: Ieece22e127dc14a7ffdc3b05656628989ad00b32 http://cgit.osmocom.org/openggsn/commit/?id=ef761f64753e9dc344148383db42d52… commit ef761f64753e9dc344148383db42d5235123405c Author: Harald Welte <laforge(a)gnumonks.org> Date: Wed Aug 2 19:49:47 2017 +0200 ippool: Add IPv6 support to IP pool implementation Change-Id: Ib98cc4bf634d6be9a7bf8c03a24e629455fcafc8 ----------------------------------------------------------------------- hooks/post-receive -- The OpenGGSN project

8 years

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

osmocom-commitlog August 2017