- gerrit-log - lists.osmocom.org

Change in osmo-e1-hardware[master]: Doc Update - Build process for DAHDI on Debian 11

by nickvsnetworking

nickvsnetworking has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-e1-hardware/+/27014 ) Change subject: Doc Update - Build process for DAHDI on Debian 11 ...................................................................... Doc Update - Build process for DAHDI on Debian 11 Change-Id: I0679bd14702b7b3d05c3346ce10358f45fef0301 --- M doc/manuals/chapters/host-software.adoc 1 file changed, 23 insertions(+), 0 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-e1-hardware refs/changes/14/27014/1 diff --git a/doc/manuals/chapters/host-software.adoc b/doc/manuals/chapters/host-software.adoc index 4c8578e..28ce7b9 100644 --- a/doc/manuals/chapters/host-software.adoc +++ b/doc/manuals/chapters/host-software.adoc @@ -44,6 +44,29 @@ When using that DAHDI Linux kernel driver, there is no need for osmo-e1d. The USB interface is directly managed inside the kernel. + +==== Installing DAHDI driver +Example installation steps, tested on Debian 11, for installing DAHDI Linux & DAHDI Tools. +Note: Plugging in the device prior to installing may lead to issues. + +---- +$ sudo apt-get install -y linux-headers-`uname -r` git dfu-util make gcc autoconf libtool +$ git clone https://git.osmocom.org/dahdi-linux/ +$ git clone https://github.com/asterisk/dahdi-tools +$ cd dahdi-linux +$ sudo make install +$ cd ../dahdi-tools +$ sudo autoreconf -i +$ ./configure +$ sudo make install +$ sudo make install-config +$ sudo modprobe icE1usb +$ sudo /etc/init.d/dahdi start +---- + +At this point you can plug in the icE1usb, and scan for it with `sudo dahdi_scan` which should list the two E1 ports on the iCE1usb. + + === Other software you can interface 3rd party applications with osmo-e1d in the following -- To view, visit https://gerrit.osmocom.org/c/osmo-e1-hardware/+/27014 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-e1-hardware Gerrit-Branch: master Gerrit-Change-Id: I0679bd14702b7b3d05c3346ce10358f45fef0301 Gerrit-Change-Number: 27014 Gerrit-PatchSet: 1 Gerrit-Owner: nickvsnetworking <nick(a)nickvsnetworking.com> Gerrit-MessageType: newchange

3 years, 5 months

1
0
0 0

Change in libosmocore[master]: tests/logging: ensure both stream and wqueue modes are tested

by fixeria

Attention is currently required from: fixeria. Hello Jenkins Builder, I'd like you to reexamine a change. Please visit https://gerrit.osmocom.org/c/libosmocore/+/27009 to look at the new patch set (#2). Change subject: tests/logging: ensure both stream and wqueue modes are tested ...................................................................... tests/logging: ensure both stream and wqueue modes are tested Change-Id: I37e789b5b287d72c443f50fd99a5284bc7296c0b --- M tests/Makefile.am M tests/logging/logging_test.c R tests/logging/logging_test_stream.err C tests/logging/logging_test_wqueue.err M tests/testsuite.at 5 files changed, 24 insertions(+), 7 deletions(-) git pull ssh://gerrit.osmocom.org:29418/libosmocore refs/changes/09/27009/2 -- To view, visit https://gerrit.osmocom.org/c/libosmocore/+/27009 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: libosmocore Gerrit-Branch: master Gerrit-Change-Id: I37e789b5b287d72c443f50fd99a5284bc7296c0b Gerrit-Change-Number: 27009 Gerrit-PatchSet: 2 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-MessageType: newpatchset

3 years, 5 months

1
0
0 0

Change in libosmocore[master]: tests/logging: merge both logging_test_{stream,wqueue}.err

by fixeria

Hello Jenkins Builder, I'd like you to reexamine a change. Please visit https://gerrit.osmocom.org/c/libosmocore/+/27013 to look at the new patch set (#3). Change subject: tests/logging: merge both logging_test_{stream,wqueue}.err ...................................................................... tests/logging: merge both logging_test_{stream,wqueue}.err Change-Id: I0ff0a6e0d22575047cc00dd822bc94d696171076 --- M tests/Makefile.am R tests/logging/logging_test.err D tests/logging/logging_test_wqueue.err M tests/testsuite.at 4 files changed, 5 insertions(+), 21 deletions(-) git pull ssh://gerrit.osmocom.org:29418/libosmocore refs/changes/13/27013/3 -- To view, visit https://gerrit.osmocom.org/c/libosmocore/+/27013 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: libosmocore Gerrit-Branch: master Gerrit-Change-Id: I0ff0a6e0d22575047cc00dd822bc94d696171076 Gerrit-Change-Number: 27013 Gerrit-PatchSet: 3 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-MessageType: newpatchset

3 years, 5 months

1
0
0 0

Change in libosmocore[master]: tests/logging: also test printing the filename information

by fixeria

Attention is currently required from: fixeria. Hello Jenkins Builder, I'd like you to reexamine a change. Please visit https://gerrit.osmocom.org/c/libosmocore/+/27010 to look at the new patch set (#2). Change subject: tests/logging: also test printing the filename information ...................................................................... tests/logging: also test printing the filename information This commit demonstrates a bug introduced in [1], which can be observed when the logging is configured to print the filename *after* the logging message (LOG_FILENAME_POS_HEADER_END): logging print file 1 last In this mode, the code in _output_buf() overwrites the '\n' sybmol contained in the logging messate itself by shifting the 'offset' backwards, and appends the nipped '\n' after the filename info. The problem is that the 'len' variable is not updated in this case, so the resulting length includes +1 character - '\0', which gets printed at the end of every logging line. Change-Id: I54bf5e5c036efb1908232fe3d8e8e2989715fbb3 Related: [1] I393907b3c9e0cc1145e102328adad0a83ee13a9f --- M tests/logging/logging_test.c M tests/logging/logging_test_stream.err M tests/logging/logging_test_wqueue.err 3 files changed, 10 insertions(+), 0 deletions(-) git pull ssh://gerrit.osmocom.org:29418/libosmocore refs/changes/10/27010/2 -- To view, visit https://gerrit.osmocom.org/c/libosmocore/+/27010 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: libosmocore Gerrit-Branch: master Gerrit-Change-Id: I54bf5e5c036efb1908232fe3d8e8e2989715fbb3 Gerrit-Change-Number: 27010 Gerrit-PatchSet: 2 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-MessageType: newpatchset

3 years, 5 months

1
0
0 0

Change in libosmocore[master]: logging: fix coding style issues in _output_buf()

by fixeria

Attention is currently required from: fixeria. Hello Jenkins Builder, I'd like you to reexamine a change. Please visit https://gerrit.osmocom.org/c/libosmocore/+/27011 to look at the new patch set (#2). Change subject: logging: fix coding style issues in _output_buf() ...................................................................... logging: fix coding style issues in _output_buf() Change-Id: Ia794dbf51045361ee40815f708344c88abe87a96 --- M src/logging.c 1 file changed, 3 insertions(+), 3 deletions(-) git pull ssh://gerrit.osmocom.org:29418/libosmocore refs/changes/11/27011/2 -- To view, visit https://gerrit.osmocom.org/c/libosmocore/+/27011 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: libosmocore Gerrit-Branch: master Gerrit-Change-Id: Ia794dbf51045361ee40815f708344c88abe87a96 Gerrit-Change-Number: 27011 Gerrit-PatchSet: 2 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-MessageType: newpatchset

3 years, 5 months

1
0
0 0

Change in libosmocore[master]: logging: fix printing of '\0' when filename printed last

by fixeria

Attention is currently required from: fixeria. Hello Jenkins Builder, I'd like you to reexamine a change. Please visit https://gerrit.osmocom.org/c/libosmocore/+/27012 to look at the new patch set (#2). Change subject: logging: fix printing of '\0' when filename printed last ...................................................................... logging: fix printing of '\0' when filename printed last As was demonstrated in I54bf5e5c036efb1908232fe3d8e8e2989715fbb3, when the logging is configured to print the filename *after* the logging message, each logging line contains an artifact - '\0'. The problem is that the 'len' variable is not updated. Fix this. Change-Id: I5c920a0d5c1cf45bcdd327b39e33d63346b4f51c Fixes: I393907b3c9e0cc1145e102328adad0a83ee13a9f --- M src/logging.c M tests/logging/logging_test_wqueue.err 2 files changed, 2 insertions(+), 0 deletions(-) git pull ssh://gerrit.osmocom.org:29418/libosmocore refs/changes/12/27012/2 -- To view, visit https://gerrit.osmocom.org/c/libosmocore/+/27012 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: libosmocore Gerrit-Branch: master Gerrit-Change-Id: I5c920a0d5c1cf45bcdd327b39e33d63346b4f51c Gerrit-Change-Number: 27012 Gerrit-PatchSet: 2 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-MessageType: newpatchset

3 years, 5 months

1
0
0 0

Change in libosmocore[master]: tests/logging: merge both logging_test_{stream,wqueue}.err

by fixeria

fixeria has uploaded a new patch set (#2). ( https://gerrit.osmocom.org/c/libosmocore/+/27013 ) Change subject: tests/logging: merge both logging_test_{stream,wqueue}.err ...................................................................... tests/logging: merge both logging_test_{stream,wqueue}.err Change-Id: I0ff0a6e0d22575047cc00dd822bc94d696171076 --- R tests/logging/logging_test.err D tests/logging/logging_test_wqueue.err M tests/testsuite.at 3 files changed, 2 insertions(+), 13 deletions(-) git pull ssh://gerrit.osmocom.org:29418/libosmocore refs/changes/13/27013/2 -- To view, visit https://gerrit.osmocom.org/c/libosmocore/+/27013 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: libosmocore Gerrit-Branch: master Gerrit-Change-Id: I0ff0a6e0d22575047cc00dd822bc94d696171076 Gerrit-Change-Number: 27013 Gerrit-PatchSet: 2 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-CC: Jenkins Builder Gerrit-MessageType: newpatchset

3 years, 5 months

1
0
0 0

Change in libosmocore[master]: logging: fix printing of '\0' when filename printed last

by fixeria

fixeria has uploaded this change for review. ( https://gerrit.osmocom.org/c/libosmocore/+/27012 ) Change subject: logging: fix printing of '\0' when filename printed last ...................................................................... logging: fix printing of '\0' when filename printed last As was demonstrated in I54bf5e5c036efb1908232fe3d8e8e2989715fbb3, when the logging is configured to print the filename *after* the logging message, each logging line contains an artifact - '\0'. The problem is that the 'len' variable is not updated. Fix this. Change-Id: I5c920a0d5c1cf45bcdd327b39e33d63346b4f51c Fixes: I393907b3c9e0cc1145e102328adad0a83ee13a9f --- M src/logging.c M tests/logging/logging_test_wqueue.err 2 files changed, 2 insertions(+), 0 deletions(-) git pull ssh://gerrit.osmocom.org:29418/libosmocore refs/changes/12/27012/1 diff --git a/src/logging.c b/src/logging.c index 5336e53..1a0abc2 100644 --- a/src/logging.c +++ b/src/logging.c @@ -586,6 +586,7 @@ break; case LOG_FILENAME_PATH: offset--; + len--; ret = snprintf(buf + offset, rem, " (%s:%d)\n", file, line); if (ret < 0) goto err; @@ -593,6 +594,7 @@ break; case LOG_FILENAME_BASENAME: offset--; + len--; ret = snprintf(buf + offset, rem, " (%s:%d)\n", const_basename(file), line); if (ret < 0) goto err; diff --git a/tests/logging/logging_test_wqueue.err b/tests/logging/logging_test_wqueue.err index 3e2008b..01ab878 100644 --- a/tests/logging/logging_test_wqueue.err +++ b/tests/logging/logging_test_wqueue.err Binary files differ -- To view, visit https://gerrit.osmocom.org/c/libosmocore/+/27012 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: libosmocore Gerrit-Branch: master Gerrit-Change-Id: I5c920a0d5c1cf45bcdd327b39e33d63346b4f51c Gerrit-Change-Number: 27012 Gerrit-PatchSet: 1 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-MessageType: newchange

3 years, 5 months

1
0
0 0

Change in libosmocore[master]: tests/logging: merge both logging_test_{stream,wqueue}.err

by fixeria

fixeria has uploaded this change for review. ( https://gerrit.osmocom.org/c/libosmocore/+/27013 ) Change subject: tests/logging: merge both logging_test_{stream,wqueue}.err ...................................................................... tests/logging: merge both logging_test_{stream,wqueue}.err Change-Id: I0ff0a6e0d22575047cc00dd822bc94d696171076 --- R tests/logging/logging_test.err D tests/logging/logging_test_wqueue.err M tests/testsuite.at 3 files changed, 2 insertions(+), 13 deletions(-) git pull ssh://gerrit.osmocom.org:29418/libosmocore refs/changes/13/27013/1 diff --git a/tests/logging/logging_test_stream.err b/tests/logging/logging_test.err similarity index 100% rename from tests/logging/logging_test_stream.err rename to tests/logging/logging_test.err diff --git a/tests/logging/logging_test_wqueue.err b/tests/logging/logging_test_wqueue.err deleted file mode 100644 index 01ab878..0000000 --- a/tests/logging/logging_test_wqueue.err +++ /dev/null @@ -1,11 +0,0 @@ -DRLL You should see this -DCC You should see this -DRLL You should see this -DLGLOBAL You should see this on DLGLOBAL (a) -DLGLOBAL You should see this on DLGLOBAL (b) -DLGLOBAL You should see this on DLGLOBAL (c) -DLGLOBAL You should see this on DLGLOBAL (d) -DLGLOBAL You should see this on DLGLOBAL (e) -DLGLOBAL You should see this (DLGLOBAL on DEBUG) -DLGLOBAL logging_test.c:137 A message with source info printed first -DLGLOBAL A message with source info printed last (logging_test.c:139) diff --git a/tests/testsuite.at b/tests/testsuite.at index 5da08e5..ca133bb 100644 --- a/tests/testsuite.at +++ b/tests/testsuite.at @@ -171,14 +171,14 @@ AT_SETUP([logging_stream]) AT_KEYWORDS([logging_stream]) cat $abs_srcdir/logging/logging_test.ok > expout -cat $abs_srcdir/logging/logging_test_stream.err > experr +cat $abs_srcdir/logging/logging_test.err > experr AT_CHECK([$abs_top_builddir/tests/logging/logging_test stream], [0], [expout], [experr]) AT_CLEANUP AT_SETUP([logging_wqueue]) AT_KEYWORDS([logging_wqueue]) cat $abs_srcdir/logging/logging_test.ok > expout -cat $abs_srcdir/logging/logging_test_wqueue.err > experr +cat $abs_srcdir/logging/logging_test.err > experr AT_CHECK([$abs_top_builddir/tests/logging/logging_test wqueue], [0], [expout], [experr]) AT_CLEANUP -- To view, visit https://gerrit.osmocom.org/c/libosmocore/+/27013 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: libosmocore Gerrit-Branch: master Gerrit-Change-Id: I0ff0a6e0d22575047cc00dd822bc94d696171076 Gerrit-Change-Number: 27013 Gerrit-PatchSet: 1 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-MessageType: newchange

3 years, 5 months

1
0
0 0

Change in libosmocore[master]: tests/logging: also test printing the filename information

by fixeria

fixeria has uploaded this change for review. ( https://gerrit.osmocom.org/c/libosmocore/+/27010 ) Change subject: tests/logging: also test printing the filename information ...................................................................... tests/logging: also test printing the filename information This commit demonstrates a bug introduced in [1], which can be observed when the logging is configured to print the filename *after* the logging message (LOG_FILENAME_POS_HEADER_END): logging print file 1 last In this mode, the code in _output_buf() overwrites the '\n' sybmol contained in the logging messate itself by shifting the 'offset' backwards, and appends the nipped '\n' after the filename info. The problem is that the 'len' variable is not updated in this case, so the resulting length includes +1 character - '\0', which gets printed at the end of every logging line. Change-Id: I54bf5e5c036efb1908232fe3d8e8e2989715fbb3 --- M tests/logging/logging_test.c M tests/logging/logging_test_stream.err M tests/logging/logging_test_wqueue.err 3 files changed, 10 insertions(+), 0 deletions(-) git pull ssh://gerrit.osmocom.org:29418/libosmocore refs/changes/10/27010/1 diff --git a/tests/logging/logging_test.c b/tests/logging/logging_test.c index 12a7374..3548b1d 100644 --- a/tests/logging/logging_test.c +++ b/tests/logging/logging_test.c @@ -130,5 +130,13 @@ log_set_category_filter(stderr_target, DLGLOBAL, 1, LOGL_DEBUG); DEBUGP(DLGLOBAL, "You should see this (DLGLOBAL on DEBUG)\n"); + /* Test printing of the filename */ + log_set_print_filename2(stderr_target, LOG_FILENAME_BASENAME); + + log_set_print_filename_pos(stderr_target, LOG_FILENAME_POS_HEADER_END); + DEBUGP(DLGLOBAL, "A message with source info printed first\n"); + log_set_print_filename_pos(stderr_target, LOG_FILENAME_POS_LINE_END); + DEBUGP(DLGLOBAL, "A message with source info printed last\n"); + return 0; } diff --git a/tests/logging/logging_test_stream.err b/tests/logging/logging_test_stream.err index 17b3cad..01ab878 100644 --- a/tests/logging/logging_test_stream.err +++ b/tests/logging/logging_test_stream.err @@ -7,3 +7,5 @@ DLGLOBAL You should see this on DLGLOBAL (d) DLGLOBAL You should see this on DLGLOBAL (e) DLGLOBAL You should see this (DLGLOBAL on DEBUG) +DLGLOBAL logging_test.c:137 A message with source info printed first +DLGLOBAL A message with source info printed last (logging_test.c:139) diff --git a/tests/logging/logging_test_wqueue.err b/tests/logging/logging_test_wqueue.err index 17b3cad..3e2008b 100644 --- a/tests/logging/logging_test_wqueue.err +++ b/tests/logging/logging_test_wqueue.err Binary files differ -- To view, visit https://gerrit.osmocom.org/c/libosmocore/+/27010 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: libosmocore Gerrit-Branch: master Gerrit-Change-Id: I54bf5e5c036efb1908232fe3d8e8e2989715fbb3 Gerrit-Change-Number: 27010 Gerrit-PatchSet: 1 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-MessageType: newchange

3 years, 5 months

1
0
0 0

2025

2024

2023

2022

gerrit-log