- gerrit-log - lists.osmocom.org

[L] Change in libosmocore[master]: tests/{gb,iuup}: also match stderr
by fixeria 03 Jan '24

03 Jan '24

fixeria has submitted this change. ( https://gerrit.osmocom.org/c/libosmocore/+/35464?usp=email ) Change subject: tests/{gb,iuup}: also match stderr ...................................................................... tests/{gb,iuup}: also match stderr Change-Id: Icc2b372563f9ca142d256f2b8e9700220c37fddf --- M tests/Makefile.am A tests/gb/gprs_ns2_test.err A tests/gb/gprs_ns_test.err A tests/iuup/iuup_test.err M tests/testsuite.at 5 files changed, 367 insertions(+), 7 deletions(-) Approvals: laforge: Looks good to me, approved Jenkins Builder: Verified pespin: Looks good to me, but someone else must approve diff --git a/tests/Makefile.am b/tests/Makefile.am index 72ecc1e..478dd48 100644 --- a/tests/Makefile.am +++ b/tests/Makefile.am @@ -414,10 +414,13 @@ gsm0408/gsm0408_test.ok gsm0408/gsm0408_test.err \ gsm0808/gsm0808_test.ok gb/bssgp_fc_tests.err \ gb/bssgp_fc_tests.ok gb/bssgp_fc_tests.sh \ - gb/gprs_bssgp_test.ok gb/gprs_ns_test.ok gea/gea_test.ok \ + gb/gprs_bssgp_test.ok gea/gea_test.ok \ gb/gprs_bssgp_rim_test.ok \ gb/gprs_ns2_vty.vty gb/osmoappdesc.py gb/osmo-ns-dummy.cfg \ + gb/gprs_ns_test.ok \ + gb/gprs_ns_test.err \ gb/gprs_ns2_test.ok \ + gb/gprs_ns2_test.err \ gprs/gprs_test.ok kasumi/kasumi_test.ok \ msgfile/msgfile_test.ok msgfile/msgconfig.cfg \ logging/logging_test.ok logging/logging_test.err \ @@ -483,6 +486,7 @@ gsm48/rest_octets_test.ok \ base64/base64_test.ok \ iuup/iuup_test.ok \ + iuup/iuup_test.err \ smscb/smscb_test.ok \ smscb/gsm0341_test.ok \ smscb/cbsp_test.ok \ @@ -605,9 +609,11 @@ gb/gprs_bssgp_rim_test \ >$(srcdir)/gb/gprs_bssgp_rim_test.ok gb/gprs_ns_test \ - >$(srcdir)/gb/gprs_ns_test.ok + >$(srcdir)/gb/gprs_ns_test.ok \ + 2>$(srcdir)/gb/gprs_ns_test.err gb/gprs_ns2_test \ - >$(srcdir)/gb/gprs_ns2_test.ok + >$(srcdir)/gb/gprs_ns2_test.ok \ + 2>$(srcdir)/gb/gprs_ns2_test.err endif if ENABLE_UTILITIES utils/utils_test \ @@ -698,7 +704,8 @@ time_cc/time_cc_test \ >$(srcdir)/time_cc/time_cc_test.ok iuup/iuup_test \ - >$(srcdir)/iuup/iuup_test.ok + >$(srcdir)/iuup/iuup_test.ok \ + 2>$(srcdir)/iuup/iuup_test.err v110/frame_test \ >$(srcdir)/v110/frame_test.ok v110/ra1_test \ diff --git a/tests/gb/gprs_ns2_test.err b/tests/gb/gprs_ns2_test.err new file mode 100644 index 0000000..5ed62db --- /dev/null +++ b/tests/gb/gprs_ns2_test.err @@ -0,0 +1,139 @@ +NSE(01001) NS-STATUS.ind(bvci=00000): cause=NSE recovery, transfer=42, first=1, mtu=119 +NSE(01001) NS-STATUS.ind(bvci=00000): cause=NSE failure, transfer=0, first=0, mtu=119 +NSE(01001)-NSVC(none) NS-STATUS.ind(bvci=00000): cause=NSVC failure, transfer=0, first=0, mtu=119 +NSE(01001)-NSVC(none) NS-STATUS.ind(bvci=00000): cause=NSVC failure, transfer=0, first=0, mtu=119 +NSE(01001)-NSVC(none) NS-STATUS.ind(bvci=00000): cause=NSVC failure, transfer=0, first=0, mtu=119 +NSE(01001) NS-STATUS.ind(bvci=00000): cause=NSE recovery, transfer=42, first=1, mtu=119 +NSE(01001)-NSVC(none) Tx NS-BLOCK cause=O&M intervention +NSE(01001)-NSVC(none) Tx NS-ALIVE +NSE(01001)-NSVC(none) Tx NS-UNBLOCK +NSE(01001)-NSVC(none) Rx NS-UNBLOCK-ACK +NSE(01001)-NSVC(none) NS-STATUS.ind(bvci=00000): cause=NSVC recovery, transfer=84, first=0, mtu=119 +NSE(01001) NS-STATUS.ind(bvci=00000): cause=NSE failure, transfer=0, first=0, mtu=119 +NSE(01001)-NSVC(none) NS-STATUS.ind(bvci=00000): cause=NSVC failure, transfer=0, first=0, mtu=119 +NSE(01001)-NSVC(none) NS-STATUS.ind(bvci=00000): cause=NSVC failure, transfer=0, first=0, mtu=119 +NSE(01001) NS-STATUS.ind(bvci=00000): cause=NSE recovery, transfer=42, first=1, mtu=119 +NSE(01001)-NSVC(none) Tx NS-BLOCK cause=O&M intervention +NSE(01001)-NSVC(none) Tx NS-ALIVE +NSE(01001) NS-STATUS.ind(bvci=00000): cause=NSE failure, transfer=0, first=0, mtu=119 +NSE(01001)-NSVC(none) Tx NS-BLOCK cause=O&M intervention +NSE(01001)-NSVC(none) Tx NS-ALIVE +NSE(01001)-NSVC(none) Tx NS-UNBLOCK +NSE(01001)-NSVC(none) Rx NS-UNBLOCK-ACK +NSE(01001) NS-STATUS.ind(bvci=00000): cause=NSE recovery, transfer=42, first=0, mtu=119 +NSE(01001)-NSVC(none) NS-STATUS.ind(bvci=00000): cause=NSVC recovery, transfer=42, first=0, mtu=119 +NSE(01001) NS-STATUS.ind(bvci=00000): cause=NSE failure, transfer=0, first=0, mtu=119 +NSE(01001)-NSVC(none) NS-STATUS.ind(bvci=00000): cause=NSVC failure, transfer=0, first=0, mtu=119 +NSE(01001)-NSVC(none) NS-STATUS.ind(bvci=00000): cause=NSVC failure, transfer=0, first=0, mtu=119 +NSE(01004)-NSVC(none) Tx NS-RESET cause=O&M intervention +NSE(01004)-NSVC(none) Rx NS-RESET +NSE(01004)-NSVC(none) Tx NS-RESET-ACK +NSE(01004)-NSVC(none) Tx NS-ALIVE +NSE(01004)-NSVC(none) Tx NS-UNBLOCK +NSE(01004)-NSVC(none) Rx NS-UNBLOCK +NSE(01004)-NSVC(none) Tx NS-UNBLOCK-ACK +NSE(01004) NS-STATUS.ind(bvci=00000): cause=NSE recovery, transfer=42, first=1, mtu=119 +NSE(01004)-NSVC(none) NS-STATUS.ind(bvci=00000): cause=NSVC recovery, transfer=42, first=0, mtu=119 +NSE(01004)-NSVC(none) Tx NS-RESET cause=O&M intervention +NSE(01004)-NSVC(none) Rx NS-RESET +NSE(01004)-NSVC(none) Tx NS-RESET-ACK +NSE(01004)-NSVC(none) Tx NS-ALIVE +NSE(01004)-NSVC(none) Tx NS-UNBLOCK +NSE(01004)-NSVC(none) Rx NS-UNBLOCK +NSE(01004)-NSVC(none) Tx NS-UNBLOCK-ACK +NSE(01004)-NSVC(none) NS-STATUS.ind(bvci=00000): cause=NSVC recovery, transfer=84, first=0, mtu=119 +NSE(01004)-NSVC(none) Rx NS-UNITDATA +NSE(01004)-NSVC(none) Rx NS-UNITDATA +NSE(01004)-NSVC(none) Tx NS-BLOCK cause=O&M intervention +NSE(01004)-NSVC(none) Tx NS-BLOCK-ACK +NSE(01004)-NSVC(none) Rx NS-BLOCK-ACK +NSE(01004)-NSVC(none) Rx NS-UNITDATA +NSE(01004)-NSVC(none) Rx NS-UNITDATA +NSE(01004)-NSVC(none) Tx NS-STATUS cause=NS-VC blocked +NSE(01004)-NSVC(none) Rx NS-UNITDATA +NSE(01004)-NSVC(none) Rx NS-UNITDATA +NSE(01004) NS-STATUS.ind(bvci=00000): cause=NSE failure, transfer=0, first=0, mtu=119 +NSE(01004)-NSVC(none) NS-STATUS.ind(bvci=00000): cause=NSVC failure, transfer=0, first=0, mtu=119 +NSE(01004)-NSVC(none) NS-STATUS.ind(bvci=00000): cause=NSVC failure, transfer=0, first=0, mtu=119 +NSE(01004)-NSVC(none) Tx NS-ALIVE +NSE(01004)-NSVC(none) Tx NS-ALIVE-ACK +NSE(01004)-NSVC(none) Rx NS-ALIVE-ACK +NSE(01004) NS-STATUS.ind(bvci=00000): cause=NSE recovery, transfer=42, first=1, mtu=119 +NSE(01004)-NSVC(none) NS-STATUS.ind(bvci=00000): cause=NSVC recovery, transfer=42, first=0, mtu=119 +NSE(01004)-NSVC(none) Tx NS-ALIVE +NSE(01004)-NSVC(none) Tx NS-ALIVE-ACK +NSE(01004)-NSVC(none) Rx NS-ALIVE-ACK +NSE(01004)-NSVC(none) NS-STATUS.ind(bvci=00000): cause=NSVC recovery, transfer=84, first=0, mtu=119 +NSE(01004)-NSVC(none) Tx NS-ALIVE +NSE(01004)-NSVC(none) Tx NS-ALIVE-ACK +NSE(01004)-NSVC(none) Rx NS-ALIVE-ACK +NSE(01004)-NSVC(none) NS-STATUS.ind(bvci=00000): cause=NSVC recovery, transfer=126, first=0, mtu=119 +NSE(01004)-NSVC(none) Rx NS-UNITDATA +NSE(01004)-NSVC(none) Rx NS-UNITDATA +NSE(01004)-NSVC(none) Rx NS-UNITDATA +NSE(01004)-NSVC(none) Rx NS-UNITDATA +NSE(01004)-NSVC(none) Rx NS-UNITDATA +NSE(01004)-NSVC(none) Rx NS-UNITDATA +NSE(01004)-NSVC(none) Tx NS-UNITDATA +NSE(01004)-NSVC(none) Tx NS-UNITDATA +NSE(01004)-NSVC(none) Tx NS-UNITDATA +NSE(01004)-NSVC(none) Tx NS-UNITDATA +NSE(01004)-NSVC(none) Tx NS-UNITDATA +NSE(01004)-NSVC(none) Tx NS-UNITDATA +NSE(01004)-NSVC(none) Tx NS-UNITDATA +NSE(01004)-NSVC(none) Tx NS-UNITDATA +NSE(01004)-NSVC(none) Tx NS-UNITDATA +NSE(01004)-NSVC(none) Tx NS-UNITDATA +NSE(01004)-NSVC(none) Tx NS-UNITDATA +NSE(01004)-NSVC(none) Tx NS-UNITDATA +count_pdus(bind[0]) = 2 +count_pdus(bind[1]) = 4 +count_pdus(bind[2]) = 6 +NSE(01004) NS-STATUS.ind(bvci=00000): cause=NSE failure, transfer=0, first=0, mtu=119 +NSE(01004)-NSVC(none) NS-STATUS.ind(bvci=00000): cause=NSVC failure, transfer=0, first=0, mtu=119 +NSE(01004)-NSVC(none) NS-STATUS.ind(bvci=00000): cause=NSVC failure, transfer=0, first=0, mtu=119 +NSE(01004)-NSVC(none) NS-STATUS.ind(bvci=00000): cause=NSVC failure, transfer=0, first=0, mtu=119 +NSE(01004)-NSVC(none) Tx NS-RESET cause=O&M intervention +NSE(01004)-NSVC(none) Rx NS-RESET +NSE(01004)-NSVC(none) Tx NS-RESET-ACK +NSE(01004)-NSVC(none) Tx NS-ALIVE +NSE(01004)-NSVC(none) Tx NS-UNBLOCK +NSE(01004)-NSVC(none) Rx NS-UNBLOCK +NSE(01004)-NSVC(none) Tx NS-UNBLOCK-ACK +NSE(01004) NS-STATUS.ind(bvci=00000): cause=NSE recovery, transfer=42, first=1, mtu=119 +NSE(01004)-NSVC(none) NS-STATUS.ind(bvci=00000): cause=NSVC recovery, transfer=42, first=0, mtu=119 +NSE(01004)-NSVC(none) Tx NS-RESET cause=O&M intervention +NSE(01004)-NSVC(none) Rx NS-RESET +NSE(01004)-NSVC(none) Tx NS-RESET-ACK +NSE(01004)-NSVC(none) Tx NS-ALIVE +NSE(01004)-NSVC(none) Tx NS-UNBLOCK +NSE(01004)-NSVC(none) Rx NS-UNBLOCK +NSE(01004)-NSVC(none) Tx NS-UNBLOCK-ACK +NSE(01004)-NSVC(none) NS-STATUS.ind(bvci=00000): cause=NSVC recovery, transfer=84, first=0, mtu=119 +NSE(01004) NS-STATUS.ind(bvci=00000): cause=NSE failure, transfer=0, first=0, mtu=119 +NSE(01004) NS-STATUS.ind(bvci=00000): cause=NSE failure, transfer=0, first=0, mtu=119 +NSE(01004)-NSVC(none) NS-STATUS.ind(bvci=00000): cause=NSVC failure, transfer=0, first=0, mtu=119 +NSE(01004)-NSVC(none) NS-STATUS.ind(bvci=00000): cause=NSVC failure, transfer=0, first=0, mtu=119 +NSE(01004)-NSVC(none) Tx NS-RESET cause=O&M intervention +NSE(01004)-NSVC(none) Rx NS-RESET +NSE(01004)-NSVC(none) Tx NS-RESET-ACK +NSE(01004)-NSVC(none) Tx NS-ALIVE +NSE(01004)-NSVC(none) Tx NS-UNBLOCK +NSE(01004)-NSVC(none) Rx NS-UNBLOCK +NSE(01004)-NSVC(none) Tx NS-UNBLOCK-ACK +NSE(01004) NS-STATUS.ind(bvci=00000): cause=NSE recovery, transfer=42, first=1, mtu=119 +NSE(01004)-NSVC(none) NS-STATUS.ind(bvci=00000): cause=NSVC recovery, transfer=42, first=0, mtu=119 +NSE(01004)-NSVC(none) Tx NS-RESET cause=O&M intervention +NSE(01004)-NSVC(none) Rx NS-RESET +NSE(01004)-NSVC(none) Tx NS-RESET-ACK +NSE(01004)-NSVC(none) Tx NS-ALIVE +NSE(01004)-NSVC(none) Tx NS-UNBLOCK +NSE(01004)-NSVC(none) Rx NS-UNBLOCK +NSE(01004)-NSVC(none) Tx NS-UNBLOCK-ACK +NSE(01004)-NSVC(none) NS-STATUS.ind(bvci=00000): cause=NSVC recovery, transfer=84, first=0, mtu=119 +NSE(01004)-NSVC(none) Rx NS-UNITDATA +NSE(01004)-NSVC(none) Rx NS-UNITDATA +NSE(01004) NS-STATUS.ind(bvci=00000): cause=NSE MTU changed, transfer=84, first=0, mtu=96 +NSE(01004) NS-STATUS.ind(bvci=00000): cause=NSE failure, transfer=0, first=0, mtu=96 +NSE(01004)-NSVC(none) NS-STATUS.ind(bvci=00000): cause=NSVC failure, transfer=0, first=0, mtu=96 +NSE(01004)-NSVC(none) NS-STATUS.ind(bvci=00000): cause=NSVC failure, transfer=0, first=0, mtu=96 diff --git a/tests/gb/gprs_ns_test.err b/tests/gb/gprs_ns_test.err new file mode 100644 index 0000000..266fb4e --- /dev/null +++ b/tests/gb/gprs_ns_test.err @@ -0,0 +1,147 @@ +NSVCI=65534 Creating NS-VC with Signal weight 1, Data weight 1 +NSVCI=65535 Creating NS-VC with Signal weight 1, Data weight 1 +Creating NS-VC for BSS at 1.2.3.4:1111 +NSVCI=65535(invalid) Rx NS RESET (NSEI=4096, NSVCI=4097, cause=O&M intervention) +NSEI=4096 Tx NS RESET ACK (NSVCI=4097) +NSVCI=65535 Creating NS-VC with Signal weight 1, Data weight 1 +Creating NS-VC for BSS at 1.2.3.4:1111 +NSVCI=65535(invalid) Rx NS RESET (NSEI=4096, NSVCI=4097, cause=O&M intervention) +NSEI=4096 Tx NS RESET ACK (NSVCI=4097) +NSVCI=65535 Creating NS-VC with Signal weight 1, Data weight 1 +Creating NS-VC for BSS at 1.2.3.4:1111 +NSVCI=65535(invalid) Rx NS RESET (NSEI=4096, NSVCI=4097, cause=O&M intervention) +NSEI=4096 Tx NS RESET ACK (NSVCI=4097) +NSVCI=65535 Creating NS-VC with Signal weight 1, Data weight 1 +Creating NS-VC for BSS at 1.2.3.4:1111 +NSVCI=65535(invalid) Rx NS RESET (NSEI=4096, NSVCI=4097, cause=O&M intervention) +NSEI=4096 Tx NS RESET ACK (NSVCI=4097) +NSVCI=65534 Creating NS-VC with Signal weight 1, Data weight 1 +Ignoring NS STATUS from 1.2.3.4:1111 for non-existing NS-VC +Ignoring NS ALIVE ACK from 1.2.3.4:1111 for non-existing NS-VC +Ignoring NS RESET ACK from 1.2.3.4:1111 for non-existing NS-VC +NSVCI=65534 Creating NS-VC with Signal weight 1, Data weight 1 +NSVCI=65535 Creating NS-VC with Signal weight 1, Data weight 1 +Creating NS-VC for BSS at 1.2.3.4:1111 +NSVCI=65535(invalid) Rx NS RESET (NSEI=4386, NSVCI=4386, cause=O&M intervention) +NSEI=4386 Tx NS RESET ACK (NSVCI=4386) +NSEI=4386 Rx NS UNBLOCK +NSVCI=4386 Rx NS RESET (NSEI=4386, NSVCI=4386, cause=O&M intervention) +NSEI=4386 Tx NS RESET ACK (NSVCI=4386) +NSVCI=65535 Creating NS-VC with Signal weight 1, Data weight 1 +Creating NS-VC for BSS at 1.2.3.4:3333 +NSVCI=65535(invalid) Rx NS RESET (NSEI=4386, NSVCI=13124, cause=O&M intervention) +NSEI=4386 Tx NS RESET ACK (NSVCI=13124) +NS-VC changed NSEI (NSVCI=4386) from 4386 to 13124 +NSVCI=4386 Rx NS RESET (NSEI=13124, NSVCI=4386, cause=O&M intervention) +NSEI=13124 Tx NS RESET ACK (NSVCI=4386) +NSVCI=13124 Rx NS RESET (NSEI=4386, NSVCI=4386, cause=O&M intervention) +NS-VC changed link (NSVCI=4386) from 1.2.3.4:3333 to 1.2.3.4:4444 +NSEI=4386 Tx NS RESET ACK (NSVCI=4386) +NSVCI=4386 Rx NS RESET (NSEI=4386, NSVCI=4386, cause=O&M intervention) +NSEI=4386 Tx NS RESET ACK (NSVCI=4386) +NSVCI=65534 Creating NS-VC with Signal weight 1, Data weight 1 +NSVCI=65535 Creating NS-VC with Signal weight 1, Data weight 1 +Creating NS-VC for BSS at 1.2.3.4:1111 +NSVCI=65535(invalid) Rx NS RESET (NSEI=4096, NSVCI=4097, cause=O&M intervention) +NSEI=4096 Tx NS RESET ACK (NSVCI=4097) +NSEI=4096 Rx NS UNBLOCK +NSVCI=65535 Creating NS-VC with Signal weight 1, Data weight 1 +Creating NS-VC for BSS at 1.2.3.4:2222 +NSVCI=65535(invalid) Rx NS RESET (NSEI=8192, NSVCI=8193, cause=O&M intervention) +NSEI=8192 Tx NS RESET ACK (NSVCI=8193) +NSEI=8192 Rx NS UNBLOCK +NSEI=4096 RESET procedure based on API request +NSEI=4096 Tx NS RESET (NSVCI=4097, cause=O&M intervention) +NSVCI=4097 Rx NS RESET ACK (NSEI=4096, NSVCI=4097) +NSEI=8192 RESET procedure based on API request +NSEI=8192 Tx NS RESET (NSVCI=8193, cause=O&M intervention) +NSVCI=8193 Rx NS RESET ACK (NSEI=4096, NSVCI=4097) +NS-VC changed link (NSVCI=4097) from 1.2.3.4:2222 to 1.2.3.4:1111 +NSEI=8192 RESET procedure based on API request +NSEI=8192 Tx NS RESET (NSVCI=8193, cause=O&M intervention) +failed to send NS message via UDP: Operation not permitted +NSEI=8192, error resetting NS-VC +NSEI=4096 RESET procedure based on API request +NSEI=4096 Tx NS RESET (NSVCI=4097, cause=O&M intervention) +NSVCI=4097 Rx NS RESET ACK (NSEI=4096, NSVCI=4097) +NSVCI=8193 Rx NS RESET (NSEI=8192, NSVCI=8193, cause=O&M intervention) +NSEI=8192 Tx NS RESET ACK (NSVCI=8193) +NSEI=8192 Rx NS UNBLOCK +NSVCI=4097 Rx NS RESET (NSEI=61440, NSVCI=4097, cause=O&M intervention) +NSEI=61440 Tx NS RESET ACK (NSVCI=4097) +NSVCI=4097 Rx NS RESET (NSEI=4096, NSVCI=61441, cause=O&M intervention) +Creating NS-VC 61441 replacing 4097 at 1.2.3.4:2222 +NSVCI=61441 Creating NS-VC with Signal weight 1, Data weight 1 +NSEI=4096 Tx NS RESET ACK (NSVCI=61441) +NSVCI=61441 Rx NS RESET (NSEI=4096, NSVCI=4097, cause=O&M intervention) +NS-VC changed link (NSVCI=4097) from 1.2.3.4:2222 to 0.0.0.0:0 +NSEI=4096 Tx NS RESET ACK (NSVCI=4097) +NSVCI=4097 Rx NS RESET ACK (NSEI=4096, NSVCI=4097) +NS RESET ACK Discarding unexpected message for NS-VCI 4097 from SGSN NSEI=4096 +NSEI=4096 RESET procedure based on API request +NSEI=4096 Tx NS RESET (NSVCI=4097, cause=O&M intervention) +NSVCI=4097 Rx NS RESET ACK (NSEI=61440, NSVCI=4097) +NSEI=61440 RESET procedure based on API request +NSEI=61440 Tx NS RESET (NSVCI=4097, cause=O&M intervention) +NSVCI=4097 Rx NS RESET ACK (NSEI=4096, NSVCI=61441) +NS-VC changed link (NSVCI=61441) from 1.2.3.4:2222 to 0.0.0.0:0 +NSVCI=61441 Rx NS RESET (NSEI=4096, NSVCI=4097, cause=O&M intervention) +NS-VC changed link (NSVCI=4097) from 1.2.3.4:2222 to 0.0.0.0:0 +NSEI=4096 Tx NS RESET ACK (NSVCI=4097) +NSEI=4096 Rx NS UNBLOCK +NSEI=4096 RESET procedure based on API request +NSEI=4096 Tx NS RESET (NSVCI=4097, cause=O&M intervention) +NSEI=4096 Rx NS UNBLOCK ACK +NSVCI=4097 Rx NS RESET ACK (NSEI=4096, NSVCI=4097) +NS RESET ACK Discarding unexpected message for NS-VCI 4097 from SGSN NSEI=4096 +NSEI=4096 Reset timed out but RESET flag is not set +NSEI=4096 Tx NS RESET (NSVCI=4097, cause=O&M intervention) +NSVCI=4097 Rx NS RESET ACK (NSEI=4096, NSVCI=4097) +NSVCI=65534 Creating NS-VC with Signal weight 1, Data weight 1 +NSVCI=257 Creating NS-VC with Signal weight 1, Data weight 1 +NSEI=256 RESET procedure based on API request +NSEI=256 Tx NS RESET (NSVCI=257, cause=O&M intervention) +NSVCI=257 Rx NS RESET ACK (NSEI=256, NSVCI=257) +NSEI=256 Tx NS UNBLOCK (NSVCI=257) +NSEI=256 Rx NS UNBLOCK ACK +NSVCI=257 Rx NS RESET (NSEI=256, NSVCI=257, cause=O&M intervention) +NSEI=256 Tx NS RESET ACK (NSVCI=257) +NSVCI=257 Rx NS RESET (NSEI=61440, NSVCI=257, cause=O&M intervention) +NSEI=256 Tx NS RESET ACK (NSVCI=257) +NSVCI=257 Rx NS RESET (NSEI=256, NSVCI=61441, cause=O&M intervention) +NSEI=256 Tx NS RESET ACK (NSVCI=257) +NSVCI=257 Rx NS RESET (NSEI=256, NSVCI=257, cause=O&M intervention) +NSEI=256 Tx NS RESET ACK (NSVCI=257) +NSVCI=257 Rx NS RESET ACK (NSEI=256, NSVCI=257) +NS RESET ACK Discarding unexpected message for NS-VCI 257 from SGSN NSEI=256 +NSEI=256 RESET procedure based on API request +NSEI=256 Tx NS RESET (NSVCI=257, cause=O&M intervention) +NSVCI=257 Rx NS RESET ACK (NSEI=57344, NSVCI=257) +NS RESET ACK Unknown NSEI 57344 (NS-VCI=257) from 5.6.7.8:32000 +NSEI=256 RESET procedure based on API request +NSEI=256 Tx NS RESET (NSVCI=257, cause=O&M intervention) +NSVCI=257 Rx NS RESET ACK (NSEI=256, NSVCI=57345) +NS RESET ACK Unknown NS-VCI 57345 (SGSN NSEI=256) from 5.6.7.8:32000 +NSVCI=65534 Creating NS-VC with Signal weight 1, Data weight 1 +NSVCI=257 Creating NS-VC with Signal weight 1, Data weight 1 +NSEI=256 RESET procedure based on API request +NSEI=256 Tx NS RESET (NSVCI=257, cause=O&M intervention) +NSVCI=257 Rx NS RESET ACK (NSEI=256, NSVCI=257) +NSEI=256 Tx NS UNBLOCK (NSVCI=257) +NSEI=256 Rx NS UNBLOCK ACK +NSEI=256 Tns-alive expired more then 10 times, blocking NS-VC +NSEI=256 RESET procedure based on API request +NSEI=256 Tx NS RESET (NSVCI=257, cause=PDU not compatible with protocol state) +NSVCI=257 Rx NS RESET ACK (NSEI=256, NSVCI=257) +NSEI=256 Tx NS UNBLOCK (NSVCI=257) +NSEI=256 Rx NS UNBLOCK ACK +NSVCI=65534 Creating NS-VC with Signal weight 1, Data weight 1 +Unable to resolve NSEI 256 to NS-VC! +NSVCI=257 Creating NS-VC with Signal weight 1, Data weight 1 +NSEI=256 RESET procedure based on API request +NSEI=256 Tx NS RESET (NSVCI=257, cause=O&M intervention) +All NS-VCs for NSEI 256 are either dead or blocked! +NSVCI=257 Rx NS RESET ACK (NSEI=256, NSVCI=257) +NSEI=256 Tx NS UNBLOCK (NSVCI=257) +All NS-VCs for NSEI 256 are either dead or blocked! +NSEI=256 Rx NS UNBLOCK ACK diff --git a/tests/iuup/iuup_test.err b/tests/iuup/iuup_test.err new file mode 100644 index 0000000..fe1ed397 --- /dev/null +++ b/tests/iuup/iuup_test.err @@ -0,0 +1,55 @@ +DLIUUP IuUP(test_tinit_timeout_retrans){NULL}: Allocated +DLIUUP IuUP(test_tinit_timeout_retrans){NULL}: Received Event IuUP-CONFIG-req +DLIUUP IuUP(test_tinit_timeout_retrans){NULL}: state_chg to Initialisation +DLIUUP IuUP(test_tinit_timeout_retrans){Initialisation}: Timeout of T1 +DLIUUP IuUP(test_tinit_timeout_retrans){Initialisation}: Timeout of T1 +DLIUUP IuUP(test_tinit_timeout_retrans){Initialisation}: Timeout of T1 +DLIUUP IuUP(test_tinit_timeout_retrans){Initialisation}: Timeout of T1 +DLIUUP IuUP(test_tinit_timeout_retrans){Initialisation}: Deallocated +DLIUUP IuUP(test_init_nack_retrans){NULL}: Allocated +DLIUUP IuUP(test_init_nack_retrans){NULL}: Received Event IuUP-CONFIG-req +DLIUUP IuUP(test_init_nack_retrans){NULL}: state_chg to Initialisation +DLIUUP IuUP(test_init_nack_retrans){Initialisation}: Received Event INIT_NACK +DLIUUP IuUP(test_init_nack_retrans){Initialisation}: Rx Initialization NACK N=0/3 +DLIUUP IuUP(test_init_nack_retrans){Initialisation}: Received Event INIT_NACK +DLIUUP IuUP(test_init_nack_retrans){Initialisation}: Rx Initialization NACK N=1/3 +DLIUUP IuUP(test_init_nack_retrans){Initialisation}: Received Event INIT_NACK +DLIUUP IuUP(test_init_nack_retrans){Initialisation}: Rx Initialization NACK N=2/3 +DLIUUP IuUP(test_init_nack_retrans){Initialisation}: Received Event INIT_NACK +DLIUUP IuUP(test_init_nack_retrans){Initialisation}: Rx Initialization NACK N=3/3 +DLIUUP IuUP(test_init_nack_retrans){Initialisation}: Deallocated +DLIUUP IuUP(test_init_ack){NULL}: Allocated +DLIUUP IuUP(test_init_ack){NULL}: Received Event IuUP-CONFIG-req +DLIUUP IuUP(test_init_ack){NULL}: state_chg to Initialisation +DLIUUP IuUP(test_init_ack){Initialisation}: Received Event LAST_INIT_ACK +DLIUUP IuUP(test_init_ack){Initialisation}: state_chg to SMpSDU_Data_Transfer_Ready +DLIUUP IuUP(test_init_ack){SMpSDU_Data_Transfer_Ready}: Received Event IuUP-DATA-ind +DLIUUP IuUP(test_init_ack){SMpSDU_Data_Transfer_Ready}: Received Event IuUP-DATA-req +DLIUUP IuUP(test_init_ack){SMpSDU_Data_Transfer_Ready}: Deallocated +DLIUUP IuUP(test_passive_init){NULL}: Allocated +DLIUUP IuUP(test_passive_init){NULL}: Received Event IuUP-CONFIG-req +DLIUUP IuUP(test_passive_init){NULL}: state_chg to Initialisation +DLIUUP IuUP(test_passive_init){Initialisation}: Received Event INIT +DLIUUP IuUP(test_passive_init){Initialisation}: Tx Initialization ACK +DLIUUP IuUP(test_passive_init){Initialisation}: state_chg to SMpSDU_Data_Transfer_Ready +DLIUUP IuUP(test_passive_init){SMpSDU_Data_Transfer_Ready}: Received Event IuUP-DATA-ind +DLIUUP IuUP(test_passive_init){SMpSDU_Data_Transfer_Ready}: Received Event IuUP-DATA-req +DLIUUP IuUP(test_passive_init){SMpSDU_Data_Transfer_Ready}: Deallocated +DLIUUP IuUP(test_passive_init_retrans){NULL}: Allocated +DLIUUP IuUP(test_passive_init_retrans){NULL}: Received Event IuUP-CONFIG-req +DLIUUP IuUP(test_passive_init_retrans){NULL}: state_chg to Initialisation +DLIUUP IuUP(test_passive_init_retrans){Initialisation}: Received Event INIT +DLIUUP IuUP(test_passive_init_retrans){Initialisation}: Tx Initialization ACK +DLIUUP IuUP(test_passive_init_retrans){Initialisation}: state_chg to SMpSDU_Data_Transfer_Ready +DLIUUP IuUP(test_passive_init_retrans){SMpSDU_Data_Transfer_Ready}: Received Event INIT +DLIUUP IuUP(test_passive_init_retrans){SMpSDU_Data_Transfer_Ready}: Tx Initialization ACK +DLIUUP IuUP(test_passive_init_retrans){SMpSDU_Data_Transfer_Ready}: Received Event IuUP-DATA-ind +DLIUUP IuUP(test_passive_init_retrans){SMpSDU_Data_Transfer_Ready}: Received Event IuUP-DATA-req +DLIUUP IuUP(test_passive_init_retrans){SMpSDU_Data_Transfer_Ready}: Deallocated +DLIUUP IuUP(test_decode_passive_init_2_rfci_no_iptis){NULL}: Allocated +DLIUUP IuUP(test_decode_passive_init_2_rfci_no_iptis){NULL}: Received Event IuUP-CONFIG-req +DLIUUP IuUP(test_decode_passive_init_2_rfci_no_iptis){NULL}: state_chg to Initialisation +DLIUUP IuUP(test_decode_passive_init_2_rfci_no_iptis){Initialisation}: Received Event INIT +DLIUUP IuUP(test_decode_passive_init_2_rfci_no_iptis){Initialisation}: Tx Initialization ACK +DLIUUP IuUP(test_decode_passive_init_2_rfci_no_iptis){Initialisation}: state_chg to SMpSDU_Data_Transfer_Ready +DLIUUP IuUP(test_decode_passive_init_2_rfci_no_iptis){SMpSDU_Data_Transfer_Ready}: Deallocated diff --git a/tests/testsuite.at b/tests/testsuite.at index b525928..e88e0a8 100644 --- a/tests/testsuite.at +++ b/tests/testsuite.at @@ -262,13 +262,15 @@ AT_SETUP([gprs-ns]) AT_KEYWORDS([gprs-ns]) cat $abs_srcdir/gb/gprs_ns_test.ok > expout -AT_CHECK([$abs_top_builddir/tests/gb/gprs_ns_test], [0], [expout], [ignore]) +cat $abs_srcdir/gb/gprs_ns_test.err > experr +AT_CHECK([$abs_top_builddir/tests/gb/gprs_ns_test], [0], [expout], [experr]) AT_CLEANUP AT_SETUP([gprs-ns2]) AT_KEYWORDS([gprs-ns2]) cat $abs_srcdir/gb/gprs_ns2_test.ok > expout -AT_CHECK([$abs_top_builddir/tests/gb/gprs_ns2_test], [0], [expout], [ignore]) +cat $abs_srcdir/gb/gprs_ns2_test.err > experr +AT_CHECK([$abs_top_builddir/tests/gb/gprs_ns2_test], [0], [expout], [experr]) AT_CLEANUP AT_SETUP([utils]) @@ -492,7 +494,8 @@ AT_SETUP([iuup]) AT_KEYWORDS([iuup]) cat $abs_srcdir/iuup/iuup_test.ok > expout -AT_CHECK([$abs_top_builddir/tests/iuup/iuup_test], [0], [expout], [ignore]) +cat $abs_srcdir/iuup/iuup_test.err > experr +AT_CHECK([$abs_top_builddir/tests/iuup/iuup_test], [0], [expout], [experr]) AT_CLEANUP AT_SETUP([v110_frame_test]) -- To view, visit https://gerrit.osmocom.org/c/libosmocore/+/35464?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: libosmocore Gerrit-Branch: master Gerrit-Change-Id: Icc2b372563f9ca142d256f2b8e9700220c37fddf Gerrit-Change-Number: 35464 Gerrit-PatchSet: 2 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: daniel <dwillmann(a)sysmocom.de> Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: merged

1 0

[S] Change in libosmocore[master]: vty: suppress warnings about len being set but not used
by fixeria 03 Jan '24

03 Jan '24

Attention is currently required from: pespin. fixeria has posted comments on this change. ( https://gerrit.osmocom.org/c/libosmocore/+/35473?usp=email ) Change subject: vty: suppress warnings about len being set but not used ...................................................................... Patch Set 2: (1 comment) This change is ready for review. File src/gsm/gsm0808_utils.c: https://gerrit.osmocom.org/c/libosmocore/+/35473/comment/f9a7f960_180cfbe3 PS1, Line 2097: (void)total_len; /* suppress warnings about total_len being set but not used */ > Ack See https://gerrit.osmocom.org/c/libosmocore/+/35480. -- To view, visit https://gerrit.osmocom.org/c/libosmocore/+/35473?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: libosmocore Gerrit-Branch: master Gerrit-Change-Id: I0040ef20ba3fc53ee7ccefc4885170f333f80566 Gerrit-Change-Number: 35473 Gerrit-PatchSet: 2 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-Attention: pespin <pespin(a)sysmocom.de> Gerrit-Comment-Date: Wed, 03 Jan 2024 11:11:34 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Comment-In-Reply-To: fixeria <vyanitskiy(a)sysmocom.de> Comment-In-Reply-To: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: comment

1 0

[M] Change in libosmocore[master]: gsm0808_utils: use osmo_strbuf API, drop APPEND_{THING,STR,CELL_ID_U}
by fixeria 03 Jan '24

03 Jan '24

fixeria has uploaded this change for review. ( https://gerrit.osmocom.org/c/libosmocore/+/35480?usp=email ) Change subject: gsm0808_utils: use osmo_strbuf API, drop APPEND_{THING,STR,CELL_ID_U} ...................................................................... gsm0808_utils: use osmo_strbuf API, drop APPEND_{THING,STR,CELL_ID_U} This code predates 2cbe25f4, adding osmo_strbuf API and so using its own append-to-strbuf implementation. Let's use the new generic API. Change-Id: Ifdfd18eeef6a0932995063259f9f179b22e781de --- M src/gsm/gsm0808_utils.c 1 file changed, 28 insertions(+), 31 deletions(-) git pull ssh://gerrit.osmocom.org:29418/libosmocore refs/changes/80/35480/1 diff --git a/src/gsm/gsm0808_utils.c b/src/gsm/gsm0808_utils.c index 778630d..c9f26d3 100644 --- a/src/gsm/gsm0808_utils.c +++ b/src/gsm/gsm0808_utils.c @@ -2075,25 +2075,12 @@ { 0, NULL } }; -#define APPEND_THING(func, args...) do { \ - int remain = buflen - (pos - buf); \ - int l = func(pos, remain, ##args); \ - if (l < 0 || l > remain) \ - pos = buf + buflen; \ - else \ - pos += l; \ - if (l > 0) \ - total_len += l; \ - } while(0) -#define APPEND_STR(fmt, args...) APPEND_THING(snprintf, fmt, ##args) -#define APPEND_CELL_ID_U(DISCR, U) APPEND_THING(gsm0808_cell_id_u_name, DISCR, U) - char *gsm0808_cell_id_name_buf(char *buf, size_t buflen, const struct gsm0808_cell_id *cid) { - char *pos = buf; - int total_len = 0; - APPEND_STR("%s:", gsm0808_cell_id_discr_name(cid->id_discr)); - APPEND_CELL_ID_U(cid->id_discr, &cid->id); + struct osmo_strbuf sb = { .buf = buf, .len = buflen }; + + OSMO_STRBUF_PRINTF(sb, "%s:", gsm0808_cell_id_discr_name(cid->id_discr)); + OSMO_STRBUF_APPEND(sb, gsm0808_cell_id_u_name, cid->id_discr, &cid->id); return buf; } @@ -2140,30 +2127,31 @@ */ int gsm0808_cell_id_list_name_buf(char *buf, size_t buflen, const struct gsm0808_cell_id_list2 *cil) { - char *pos = buf; - int total_len = 0; - int i; + struct osmo_strbuf sb = { .buf = buf, .len = buflen }; - APPEND_STR("%s[%u]", gsm0808_cell_id_discr_name(cil->id_discr), cil->id_list_len); + OSMO_STRBUF_PRINTF(sb, "%s[%u]", + gsm0808_cell_id_discr_name(cil->id_discr), + cil->id_list_len); switch (cil->id_discr) { case CELL_IDENT_BSS: case CELL_IDENT_NO_CELL: - return total_len; + return sb.chars_needed; default: break; } - APPEND_STR(":{"); + OSMO_STRBUF_PRINTF(sb, ":{"); - for (i = 0; i < cil->id_list_len; i++) { + for (unsigned int i = 0; i < cil->id_list_len; i++) { if (i) - APPEND_STR(", "); - APPEND_CELL_ID_U(cil->id_discr, &cil->id_list[i]); + OSMO_STRBUF_PRINTF(sb, ", "); + OSMO_STRBUF_APPEND(sb, gsm0808_cell_id_u_name, + cil->id_discr, &cil->id_list[i]); } - APPEND_STR("}"); - return total_len; + OSMO_STRBUF_PRINTF(sb, "}"); + return sb.chars_needed; } /*! Return a human-readable representation of \a cil in a static buffer. @@ -2185,9 +2173,6 @@ return buf; } -#undef APPEND_STR -#undef APPEND_CELL_ID_U - char *gsm0808_channel_type_name_buf(char *buf, size_t buf_len, const struct gsm0808_channel_type *ct) { snprintf(buf, buf_len, "ch_indctr=0x%x ch_rate_type=0x%x perm_spch=%s", -- To view, visit https://gerrit.osmocom.org/c/libosmocore/+/35480?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: libosmocore Gerrit-Branch: master Gerrit-Change-Id: Ifdfd18eeef6a0932995063259f9f179b22e781de Gerrit-Change-Number: 35480 Gerrit-PatchSet: 1 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-MessageType: newchange

1 0

[S] Change in libosmocore[master]: pseudotalloc: add talloc_memdup(), use it in talloc_strdup()
by fixeria 03 Jan '24

03 Jan '24

Attention is currently required from: pespin. fixeria has posted comments on this change. ( https://gerrit.osmocom.org/c/libosmocore/+/35467?usp=email ) Change subject: pseudotalloc: add talloc_memdup(), use it in talloc_strdup() ...................................................................... Patch Set 3: (1 comment) Patchset: PS3: > an explanation on why is this needed may be worth it. It's needed because I am using `talloc_memdup()` in the next patch (adding V.110 TA), and it fails to pass build verification because this function is missing in pseudotalloc. This specifically applies to the embedded build variant, which is using pseudotalloc instead of libtalloc. -- To view, visit https://gerrit.osmocom.org/c/libosmocore/+/35467?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: libosmocore Gerrit-Branch: master Gerrit-Change-Id: Ifcf377c3496a9e75404932a1aaba7d74888cf4cf Gerrit-Change-Number: 35467 Gerrit-PatchSet: 3 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-Attention: pespin <pespin(a)sysmocom.de> Gerrit-Comment-Date: Wed, 03 Jan 2024 10:32:33 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Comment-In-Reply-To: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: comment

1 0

[S] Change in libosmocore[master]: {gsm,vty}: suppress warnings about [total_]len being set but not used
by fixeria 03 Jan '24

03 Jan '24

Attention is currently required from: pespin. fixeria has posted comments on this change. ( https://gerrit.osmocom.org/c/libosmocore/+/35473?usp=email ) Change subject: {gsm,vty}: suppress warnings about [total_]len being set but not used ...................................................................... Patch Set 1: (1 comment) File src/gsm/gsm0808_utils.c: https://gerrit.osmocom.org/c/libosmocore/+/35473/comment/7ac657c2_0d4c756d PS1, Line 2097: (void)total_len; /* suppress warnings about total_len being set but not used */ > sounds like we want to use osmo_strbuf here instead. Ack -- To view, visit https://gerrit.osmocom.org/c/libosmocore/+/35473?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: libosmocore Gerrit-Branch: master Gerrit-Change-Id: I0040ef20ba3fc53ee7ccefc4885170f333f80566 Gerrit-Change-Number: 35473 Gerrit-PatchSet: 1 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-Attention: pespin <pespin(a)sysmocom.de> Gerrit-Comment-Date: Wed, 03 Jan 2024 10:28:49 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Comment-In-Reply-To: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: comment

1 0

[S] Change in osmo-ttcn3-hacks[master]: GTP_Emulation: SGSN_ContextRequest: Fix unconditional access to optio...
by fixeria 03 Jan '24

03 Jan '24

Attention is currently required from: pespin. fixeria has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/35477?usp=email ) Change subject: GTP_Emulation: SGSN_ContextRequest: Fix unconditional access to optional field IMSI ...................................................................... Patch Set 1: Code-Review+2 -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/35477?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: I0721f25deeae822150a39e52916b8bf272de21ee Gerrit-Change-Number: 35477 Gerrit-PatchSet: 1 Gerrit-Owner: pespin <pespin(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Attention: pespin <pespin(a)sysmocom.de> Gerrit-Comment-Date: Wed, 03 Jan 2024 10:27:57 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

1 0

[S] Change in osmo-ttcn3-hacks[master]: mme: Use LAC from SGSN with most significat bit set to 0
by fixeria 03 Jan '24

03 Jan '24

Attention is currently required from: pespin. fixeria has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/35430?usp=email ) Change subject: mme: Use LAC from SGSN with most significat bit set to 0 ...................................................................... Patch Set 1: Code-Review+2 -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/35430?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: Iaf89228f6f026e04d5f583211959025e6d8d4a1d Gerrit-Change-Number: 35430 Gerrit-PatchSet: 1 Gerrit-Owner: pespin <pespin(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Attention: pespin <pespin(a)sysmocom.de> Gerrit-Comment-Date: Wed, 03 Jan 2024 10:27:45 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

1 0

[S] Change in osmo-ttcn3-hacks[master]: mme: Parametrize RAI+CI used by emulated SGSN
by fixeria 03 Jan '24

03 Jan '24

Attention is currently required from: pespin. fixeria has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/35429?usp=email ) Change subject: mme: Parametrize RAI+CI used by emulated SGSN ...................................................................... Patch Set 1: Code-Review+2 -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/35429?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: Ia7d807bb5d75d711be7d4f6fbccd8fd123da171f Gerrit-Change-Number: 35429 Gerrit-PatchSet: 1 Gerrit-Owner: pespin <pespin(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Attention: pespin <pespin(a)sysmocom.de> Gerrit-Comment-Date: Wed, 03 Jan 2024 10:27:32 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

1 0

[M] Change in osmo-ttcn3-hacks[master]: mme: TC_ue_cell_reselect_eutran_to_geran: Make sure oI flag is not se...
by fixeria 03 Jan '24

03 Jan '24

Attention is currently required from: pespin. fixeria has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/35428?usp=email ) Change subject: mme: TC_ue_cell_reselect_eutran_to_geran: Make sure oI flag is not set in DeleteSessionReq ...................................................................... Patch Set 1: Code-Review+2 -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/35428?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: If863f260a274fec5921ed888216c1688ff115ade Gerrit-Change-Number: 35428 Gerrit-PatchSet: 1 Gerrit-Owner: pespin <pespin(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Attention: pespin <pespin(a)sysmocom.de> Gerrit-Comment-Date: Wed, 03 Jan 2024 10:26:41 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

1 0

[M] Change in osmo-ttcn3-hacks[master]: mme: Trigger last parts of procedure TC_ue_cell_reselect_eutran_to_geran
by fixeria 03 Jan '24

03 Jan '24

Attention is currently required from: pespin. fixeria has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/35413?usp=email ) Change subject: mme: Trigger last parts of procedure TC_ue_cell_reselect_eutran_to_geran ...................................................................... Patch Set 1: (3 comments) File mme/MME_Tests.ttcn: https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/35413/comment/54a7b769_f854… PS1, Line 668: S1AP.receive(PDU_NAS_EPS:?) -> value rx_nas Having such a generic 'catch-all' case makes the altstep less flexible. You know the code base better and this may be fine, but AFAICS it cannot be used together with other altsteps expecting `PDU_NAS_EPS:?`. https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/35413/comment/a5c051aa_9544… PS1, Line 840: var BearerContextIEs rx_bctx_ies; : var template (value) FullyQualifiedTEID s11_fteid_c_ie, s11_fteid_u_ie, s5c_fteid_c_ie, s5c_fteid_u_ie; : var template (value) BearerContextIEs bctx_ies; all unused? https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/35413/comment/37be351a_5e87… PS1, Line 850: GTP2.receive Likewise, this catch-everything makes it more a single-purpose function rather than a generic altstep. -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/35413?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: Ic0263a3aec922194aad22b031b2c82a99954354d Gerrit-Change-Number: 35413 Gerrit-PatchSet: 1 Gerrit-Owner: pespin <pespin(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-CC: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Attention: pespin <pespin(a)sysmocom.de> Gerrit-Comment-Date: Wed, 03 Jan 2024 10:22:30 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Gerrit-MessageType: comment

1 0

2026

2025

2024

2023

2022

gerrit-log