- gerrit-log - lists.osmocom.org

[M] Change in osmo-ttcn3-hacks[master]: bts: f_verify_ramp_up(): fix RxLev / dBm mixup
by laforge 09 Feb '26

09 Feb '26

Attention is currently required from: fixeria, pespin. laforge has posted comments on this change by fixeria. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/42022?usp=email ) Change subject: bts: f_verify_ramp_up(): fix RxLev / dBm mixup ...................................................................... Patch Set 3: Code-Review+2 -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/42022?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: I818d18d6e0711247b73ee1f336133e2ed3f6e2cb Gerrit-Change-Number: 42022 Gerrit-PatchSet: 3 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Attention: pespin <pespin(a)sysmocom.de> Gerrit-Comment-Date: Mon, 09 Feb 2026 12:40:39 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes

1 0

[XS] Change in osmo-ttcn3-hacks[master]: bts: fix TC_rsl_ms_pwr_dyn_ass_updown: simulate a good C/I value
by laforge 09 Feb '26

09 Feb '26

Attention is currently required from: fixeria. laforge has posted comments on this change by fixeria. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/42067?usp=email ) Change subject: bts: fix TC_rsl_ms_pwr_dyn_ass_updown: simulate a good C/I value ...................................................................... Patch Set 1: Code-Review+2 -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/42067?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: I8926fc925e930bc2703210931b613988161a72da Gerrit-Change-Number: 42067 Gerrit-PatchSet: 1 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Comment-Date: Mon, 09 Feb 2026 12:40:36 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes

1 0

[XS] Change in osmo-ttcn3-hacks[master]: bts: fix TC_rsl_ms_pwr_dyn_ass_updown: simulate a good C/I value
by laforge 09 Feb '26

09 Feb '26

Attention is currently required from: fixeria. laforge has posted comments on this change by fixeria. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/42067?usp=email ) Change subject: bts: fix TC_rsl_ms_pwr_dyn_ass_updown: simulate a good C/I value ...................................................................... Patch Set 1: Code-Review+1 -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/42067?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: I8926fc925e930bc2703210931b613988161a72da Gerrit-Change-Number: 42067 Gerrit-PatchSet: 1 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Comment-Date: Mon, 09 Feb 2026 12:39:11 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes

1 0

[M] Change in osmo-ttcn3-hacks[master]: bts: f_verify_ramp_up(): fix RxLev / dBm mixup
by laforge 09 Feb '26

09 Feb '26

Attention is currently required from: fixeria, pespin. laforge has posted comments on this change by fixeria. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/42022?usp=email ) Change subject: bts: f_verify_ramp_up(): fix RxLev / dBm mixup ...................................................................... Patch Set 3: Code-Review+1 -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/42022?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: I818d18d6e0711247b73ee1f336133e2ed3f6e2cb Gerrit-Change-Number: 42022 Gerrit-PatchSet: 3 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Attention: pespin <pespin(a)sysmocom.de> Gerrit-Comment-Date: Mon, 09 Feb 2026 12:38:58 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes

1 0

[S] Change in osmo-sgsn[master]: Some older modules, such as the Air20X module, may crash during PDP a...
by laforge 09 Feb '26

09 Feb '26

Attention is currently required from: canghaiwuhen. laforge has posted comments on this change by canghaiwuhen. ( https://gerrit.osmocom.org/c/osmo-sgsn/+/42050?usp=email ) Change subject: Some older modules, such as the Air20X module, may crash during PDP attachment due to excessively long QoS response packets. If the PDP is not released after successful attachment, the module will restart, and subsequent TCP connections will fail. ...................................................................... Patch Set 3: (1 comment) Patchset: PS3: can you please re-submit and fix all the whitespace errors you introduce as reported by the linter? Thanks! -- To view, visit https://gerrit.osmocom.org/c/osmo-sgsn/+/42050?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: osmo-sgsn Gerrit-Branch: master Gerrit-Change-Id: I11c24b64f0e49cf80c825969dbf018b2948d855c Gerrit-Change-Number: 42050 Gerrit-PatchSet: 3 Gerrit-Owner: canghaiwuhen <canghaiwuhen(a)gmail.com> Gerrit-Reviewer: Jenkins Builder Gerrit-CC: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-CC: laforge <laforge(a)osmocom.org> Gerrit-CC: pespin <pespin(a)sysmocom.de> Gerrit-Attention: canghaiwuhen <canghaiwuhen(a)gmail.com> Gerrit-Comment-Date: Mon, 09 Feb 2026 12:38:05 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No

1 0

[S] Change in osmo-bts[master]: osmo-bts-trx: trx_provision_fsm: do not send *_CNF events on failure
by fixeria 09 Feb '26

09 Feb '26

fixeria has submitted this change. ( https://gerrit.osmocom.org/c/osmo-bts/+/42046?usp=email ) Change subject: osmo-bts-trx: trx_provision_fsm: do not send *_CNF events on failure ...................................................................... osmo-bts-trx: trx_provision_fsm: do not send *_CNF events on failure The trx_provision_fsm currently does not check the event data (rc), causing failed operations (rc != 0) to be treated as successful confirmations. Avoid emitting *_CNF events when a command fails, ensuring that only successful operations generate confirmation events. Change-Id: Id85fb19c6621f55a9c46882df24bec534864a9dc --- M src/osmo-bts-trx/trx_provision_fsm.c 1 file changed, 12 insertions(+), 4 deletions(-) Approvals: pespin: Looks good to me, but someone else must approve Jenkins Builder: Verified osmith: Looks good to me, approved diff --git a/src/osmo-bts-trx/trx_provision_fsm.c b/src/osmo-bts-trx/trx_provision_fsm.c index 05f3cdb..2b8a2d2 100644 --- a/src/osmo-bts-trx/trx_provision_fsm.c +++ b/src/osmo-bts-trx/trx_provision_fsm.c @@ -63,22 +63,30 @@ static void l1if_rxtune_cb(struct trx_l1h *l1h, int rc) { - osmo_fsm_inst_dispatch(l1h->provision_fi, TRX_PROV_EV_RXTUNE_CNF, (void*)(intptr_t)rc); + if (rc != 0) + return; + osmo_fsm_inst_dispatch(l1h->provision_fi, TRX_PROV_EV_RXTUNE_CNF, NULL); } static void l1if_txtune_cb(struct trx_l1h *l1h, int rc) { - osmo_fsm_inst_dispatch(l1h->provision_fi, TRX_PROV_EV_TXTUNE_CNF, (void*)(intptr_t)rc); + if (rc != 0) + return; + osmo_fsm_inst_dispatch(l1h->provision_fi, TRX_PROV_EV_TXTUNE_CNF, NULL); } static void l1if_settsc_cb(struct trx_l1h *l1h, int rc) { - osmo_fsm_inst_dispatch(l1h->provision_fi, TRX_PROV_EV_SETTSC_CNF, (void*)(intptr_t)rc); + if (rc != 0) + return; + osmo_fsm_inst_dispatch(l1h->provision_fi, TRX_PROV_EV_SETTSC_CNF, NULL); } static void l1if_setbsic_cb(struct trx_l1h *l1h, int rc) { - osmo_fsm_inst_dispatch(l1h->provision_fi, TRX_PROV_EV_SETBSIC_CNF, (void*)(intptr_t)rc); + if (rc != 0) + return; + osmo_fsm_inst_dispatch(l1h->provision_fi, TRX_PROV_EV_SETBSIC_CNF, NULL); } static void l1if_getnompower_cb(struct trx_l1h *l1h, int nominal_power, int rc) -- To view, visit https://gerrit.osmocom.org/c/osmo-bts/+/42046?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: merged Gerrit-Project: osmo-bts Gerrit-Branch: master Gerrit-Change-Id: Id85fb19c6621f55a9c46882df24bec534864a9dc Gerrit-Change-Number: 42046 Gerrit-PatchSet: 1 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: osmith <osmith(a)sysmocom.de> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de>

1 0

[S] Change in osmo-bts[master]: osmo-bts-trx: apply 'max-initial' value before POWERON
by fixeria 09 Feb '26

09 Feb '26

fixeria has submitted this change. ( https://gerrit.osmocom.org/c/osmo-bts/+/42033?usp=email ) Change subject: osmo-bts-trx: apply 'max-initial' value before POWERON ...................................................................... osmo-bts-trx: apply 'max-initial' value before POWERON Not applying this value before powering the transceiver on results in transmission at full Tx power for a certain amount of time before the power ramping begins. Change-Id: Iff03d4dcb74f67629a59c8d6f8bb60929d9f6ddd Related: OS#6939 --- M src/osmo-bts-trx/l1_if.h M src/osmo-bts-trx/trx_provision_fsm.c M src/osmo-bts-trx/trx_provision_fsm.h 3 files changed, 37 insertions(+), 2 deletions(-) Approvals: Jenkins Builder: Verified laforge: Looks good to me, but someone else must approve fixeria: Looks good to me, approved pespin: Looks good to me, but someone else must approve diff --git a/src/osmo-bts-trx/l1_if.h b/src/osmo-bts-trx/l1_if.h index 0180499..09bf7ac 100644 --- a/src/osmo-bts-trx/l1_if.h +++ b/src/osmo-bts-trx/l1_if.h @@ -97,6 +97,9 @@ bool nomtxpower_sent; bool nomtxpower_acked; + bool setpower_sent; + bool setpower_acked; + bool maxdly_valid; int maxdly; bool maxdly_sent; diff --git a/src/osmo-bts-trx/trx_provision_fsm.c b/src/osmo-bts-trx/trx_provision_fsm.c index 2b8a2d2..617dab3 100644 --- a/src/osmo-bts-trx/trx_provision_fsm.c +++ b/src/osmo-bts-trx/trx_provision_fsm.c @@ -35,6 +35,7 @@ #include <osmo-bts/rsl.h> #include <osmo-bts/nm_common_fsm.h> #include <osmo-bts/signal.h> +#include <osmo-bts/tx_power.h> #include "l1_if.h" #include "trx_provision_fsm.h" @@ -101,6 +102,13 @@ osmo_fsm_inst_dispatch(l1h->provision_fi, TRX_PROV_EV_SETFORMAT_CNF, (void*)(intptr_t)rc); } +static void l1if_setpower_att_cb(struct trx_l1h *l1h, int power_att_db, int rc) +{ + if (rc != 0) + return; + osmo_fsm_inst_dispatch(l1h->provision_fi, TRX_PROV_EV_SETPOWER_CNF, NULL); +} + /* * transceiver provisioning */ @@ -138,6 +146,9 @@ l1h->config.nomtxpower_sent = false; l1h->config.nomtxpower_acked = false; + l1h->config.setpower_sent = false; + l1h->config.setpower_acked = false; + l1h->config.maxdly_sent = false; l1h->config.maxdlynb_sent = false; @@ -206,6 +217,18 @@ l1h->config.bsic_sent = true; l1h->config.bsic_acked = false; } + /* Once the nominal Tx power is known, apply the initial Tx power attenuation + * before the transceiver is powered on. Otherwise it will be transmitting + * at full power for a certain period of time before the power ramping begins. */ + if (!l1h->config.setpower_sent && + (l1h->config.nomtxpower_acked || l1h->config.nominal_power_set_by_vty)) { + int initial_mdBm = power_ramp_initial_power_mdBm(pinst->trx); + int power_att_dB = (get_p_max_out_mdBm(pinst->trx) - initial_mdBm) / 1000; + + trx_if_cmd_setpower_att(l1h, power_att_dB, l1if_setpower_att_cb); + l1h->config.setpower_sent = true; + l1h->config.setpower_acked = false; + } /* Ask transceiver to use the newest TRXD PDU version if not using it yet */ if (!l1h->config.setformat_sent) { @@ -269,9 +292,10 @@ (l1h->config.bsic_acked || !pinst->phy_link->u.osmotrx.use_legacy_setbsic) && (l1h->config.tsc_acked || pinst->phy_link->u.osmotrx.use_legacy_setbsic) && (l1h->config.nomtxpower_acked || l1h->config.nominal_power_set_by_vty) && + (l1h->config.setpower_acked) && (l1h->config.setformat_acked)) { return true; - } + } return false; } @@ -463,6 +487,10 @@ l1h->config.nomtxpower_acked = true; l1if_trx_set_nominal_power(trx, nominal_power); break; + case TRX_PROV_EV_SETPOWER_CNF: + if (l1h->config.setpower_sent) + l1h->config.setpower_acked = true; + break; case TRX_PROV_EV_SETBSIC_CNF: if (l1h->config.bsic_sent) l1h->config.bsic_acked = true; @@ -516,7 +544,7 @@ else trx_prov_fsm_state_chg(fi, TRX_PROV_ST_OPEN_WAIT_POWERON_CNF); } else { - LOGPFSML(fi, LOGL_INFO, "Delay poweron, wait for:%s%s%s%s%s%s%s%s\n", + LOGPFSML(fi, LOGL_INFO, "Delay poweron, wait for:%s%s%s%s%s%s%s%s%s\n", l1h->config.enabled ? "" :" enable", pinst->phy_link->u.osmotrx.use_legacy_setbsic ? (l1h->config.bsic_valid ? (l1h->config.bsic_acked ? "" : " bsic-ack") : " bsic") : @@ -525,6 +553,7 @@ l1h->config.rxtune_acked ? "" : " rxtune-ack", l1h->config.txtune_acked ? "" : " txtune-ack", l1h->config.nominal_power_set_by_vty ? "" : (l1h->config.nomtxpower_acked ? "" : " nomtxpower-ack"), + l1h->config.setpower_acked ? "" : " setpower-ack", l1h->config.setformat_acked ? "" : " setformat-ack", waiting_other_trx ? "" : " other-trx" ); @@ -669,6 +698,7 @@ X(TRX_PROV_EV_RXTUNE_CNF) | X(TRX_PROV_EV_TXTUNE_CNF) | X(TRX_PROV_EV_NOMTXPOWER_CNF) | + X(TRX_PROV_EV_SETPOWER_CNF) | X(TRX_PROV_EV_SETBSIC_CNF) | X(TRX_PROV_EV_SETTSC_CNF) | X(TRX_PROV_EV_SETFORMAT_CNF), @@ -724,6 +754,7 @@ OSMO_VALUE_STRING(TRX_PROV_EV_RXTUNE_CNF), OSMO_VALUE_STRING(TRX_PROV_EV_TXTUNE_CNF), OSMO_VALUE_STRING(TRX_PROV_EV_NOMTXPOWER_CNF), + OSMO_VALUE_STRING(TRX_PROV_EV_SETPOWER_CNF), OSMO_VALUE_STRING(TRX_PROV_EV_SETBSIC_CNF), OSMO_VALUE_STRING(TRX_PROV_EV_SETTSC_CNF), OSMO_VALUE_STRING(TRX_PROV_EV_SETFORMAT_CNF), diff --git a/src/osmo-bts-trx/trx_provision_fsm.h b/src/osmo-bts-trx/trx_provision_fsm.h index e89cd32..be8241d 100644 --- a/src/osmo-bts-trx/trx_provision_fsm.h +++ b/src/osmo-bts-trx/trx_provision_fsm.h @@ -57,6 +57,7 @@ TRX_PROV_EV_RXTUNE_CNF, TRX_PROV_EV_TXTUNE_CNF, TRX_PROV_EV_NOMTXPOWER_CNF, + TRX_PROV_EV_SETPOWER_CNF, TRX_PROV_EV_SETBSIC_CNF, TRX_PROV_EV_SETTSC_CNF, TRX_PROV_EV_SETFORMAT_CNF, -- To view, visit https://gerrit.osmocom.org/c/osmo-bts/+/42033?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: merged Gerrit-Project: osmo-bts Gerrit-Branch: master Gerrit-Change-Id: Iff03d4dcb74f67629a59c8d6f8bb60929d9f6ddd Gerrit-Change-Number: 42033 Gerrit-PatchSet: 3 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de>

1 0

[M] Change in osmo-bts[master]: power_control: lchan_ms_pwr_ctrl(): always log input values
by fixeria 09 Feb '26

09 Feb '26

fixeria has submitted this change. ( https://gerrit.osmocom.org/c/osmo-bts/+/42061?usp=email ) Change subject: power_control: lchan_ms_pwr_ctrl(): always log input values ...................................................................... power_control: lchan_ms_pwr_ctrl(): always log input values Depending on the power control interval (P_Con_INTERVAL), the MS power loop may delay the power control decision for a certain amount of SACCH block periods. In this case lchan_ms_pwr_ctrl() returns early and no logging is printed at all. Let's always log the input values (reported level, UL measurements) early in lchan_ms_pwr_ctrl(). This is useful for debugging, and this is exactly what lchan_bs_pwr_ctrl() does. Change-Id: I3b8466f062624fc8a2ea6f8220c057d3812f2c35 --- M src/common/power_control.c M tests/power/ms_power_loop_test.err 2 files changed, 82 insertions(+), 0 deletions(-) Approvals: fixeria: Looks good to me, approved Jenkins Builder: Verified pespin: Looks good to me, but someone else must approve osmith: Looks good to me, but someone else must approve diff --git a/src/common/power_control.c b/src/common/power_control.c index a9fd77f..b8ac17b 100644 --- a/src/common/power_control.c +++ b/src/common/power_control.c @@ -230,6 +230,13 @@ ul_lqual_cb_avg = do_avg_algo(ci_meas, &state->ci_meas_proc, ul_lqual_cb); rxlev_avg = do_avg_algo(&params->rxlev_meas, &state->rxlev_meas_proc, dbm2rxlev(ul_rssi_dbm)); + LOGPLCHAN(lchan, DLOOP, LOGL_DEBUG, "Rx UL Measurement Report: " + "ms-pwr-lvl[curr %u, max %u], RSSI[curr %d, avg %d, thresh %d..%d] dBm," + " C/I[curr %d, avg %d, thresh %d..%d] dB\n", + ms_power_lvl, state->max, ul_rssi_dbm, rxlev2dbm(rxlev_avg), + rxlev2dbm(params->rxlev_meas.lower_thresh), rxlev2dbm(params->rxlev_meas.upper_thresh), + ul_lqual_cb/10, ul_lqual_cb_avg/10, ci_meas->lower_thresh, ci_meas->upper_thresh); + /* Shall we skip current block based on configured interval? */ if (ctrl_interval_skip_block(params, state)) return 0; diff --git a/tests/power/ms_power_loop_test.err b/tests/power/ms_power_loop_test.err index 07d9069..640f86d 100644 --- a/tests/power/ms_power_loop_test.err +++ b/tests/power/ms_power_loop_test.err @@ -1,65 +1,140 @@ +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 15, max 2], RSSI[curr -60, avg -60, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 15 (0 dBm): ms-pwr-lvl[curr 15, max 2], RSSI[curr -60, avg -60, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 15, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 15 (0 dBm) => 13 (4 dBm): ms-pwr-lvl[curr 15, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 13, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 13 (4 dBm) => 11 (8 dBm): ms-pwr-lvl[curr 13, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 11, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 11 (8 dBm) => 9 (12 dBm): ms-pwr-lvl[curr 11, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 9, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 9 (12 dBm) => 7 (16 dBm): ms-pwr-lvl[curr 9, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 7, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 7 (16 dBm) => 5 (20 dBm): ms-pwr-lvl[curr 7, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 5, max 2], RSSI[curr -75, avg -75, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 5 (20 dBm): ms-pwr-lvl[curr 5, max 2], RSSI[curr -75, avg -75, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 5, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 5 (20 dBm) => 3 (24 dBm): ms-pwr-lvl[curr 5, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 3, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 3 (24 dBm) => 2 (26 dBm): ms-pwr-lvl[curr 3, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 2, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 2 (26 dBm): ms-pwr-lvl[curr 2, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 2, max 0], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 2 (26 dBm) => 0 (30 dBm): ms-pwr-lvl[curr 2, max 0], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 0, max 0], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 0 (30 dBm): ms-pwr-lvl[curr 0, max 0], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 0, max 29], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 0 (30 dBm) => 30 (34 dBm): ms-pwr-lvl[curr 0, max 29], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 30, max 29], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 30 (34 dBm) => 29 (36 dBm): ms-pwr-lvl[curr 30, max 29], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 29, max 29], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 29 (36 dBm): ms-pwr-lvl[curr 29, max 29], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 29, max 29], RSSI[curr -75, avg -75, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 29 (36 dBm): ms-pwr-lvl[curr 29, max 29], RSSI[curr -75, avg -75, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 29, max 29], RSSI[curr -45, avg -47, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Lowering MS power control level 29 (36 dBm) => 30 (34 dBm): ms-pwr-lvl[curr 29, max 29], RSSI[curr -45, avg -47, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 30, max 29], RSSI[curr -45, avg -47, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Lowering MS power control level 30 (34 dBm) => 31 (32 dBm): ms-pwr-lvl[curr 30, max 29], RSSI[curr -45, avg -47, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 31, max 29], RSSI[curr -45, avg -47, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Lowering MS power control level 31 (32 dBm) => 0 (30 dBm): ms-pwr-lvl[curr 31, max 29], RSSI[curr -45, avg -47, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 0, max 29], RSSI[curr -73, avg -73, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Lowering MS power control level 0 (30 dBm) => 1 (28 dBm): ms-pwr-lvl[curr 0, max 29], RSSI[curr -73, avg -73, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 1, max 29], RSSI[curr -77, avg -77, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 1 (28 dBm) => 0 (30 dBm): ms-pwr-lvl[curr 1, max 29], RSSI[curr -77, avg -77, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 0, max 14], RSSI[curr -73, avg -73, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Lowering MS power control level 0 (30 dBm) => 14 (2 dBm): ms-pwr-lvl[curr 0, max 14], RSSI[curr -73, avg -73, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 14, max 0], RSSI[curr -40, avg -47, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Lowering MS power control level 14 (2 dBm) => 15 (0 dBm): ms-pwr-lvl[curr 14, max 0], RSSI[curr -40, avg -47, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 15, max 2], RSSI[curr -75, avg -75, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 15 (0 dBm): ms-pwr-lvl[curr 15, max 2], RSSI[curr -75, avg -75, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 15, max 2], RSSI[curr -90, avg -78, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 15 (0 dBm) => 13 (3 dBm): ms-pwr-lvl[curr 15, max 2], RSSI[curr -90, avg -78, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 13, max 2], RSSI[curr -90, avg -80, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 13 (4 dBm) => 11 (8 dBm): ms-pwr-lvl[curr 13, max 2], RSSI[curr -90, avg -80, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 11, max 2], RSSI[curr -70, avg -78, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 11 (8 dBm) => 9 (11 dBm): ms-pwr-lvl[curr 11, max 2], RSSI[curr -70, avg -78, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 15, max 2], RSSI[curr -50, avg -50, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 15 (0 dBm): ms-pwr-lvl[curr 15, max 2], RSSI[curr -50, avg -50, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 15, max 2], RSSI[curr -50, avg -50, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 15 (0 dBm): ms-pwr-lvl[curr 15, max 2], RSSI[curr -50, avg -50, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 15, max 2], RSSI[curr -110, avg -92, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 15 (0 dBm) => 13 (4 dBm): ms-pwr-lvl[curr 15, max 2], RSSI[curr -110, avg -92, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 15, max 2], RSSI[curr -75, avg -75, thresh -80..-70] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 15 (0 dBm): ms-pwr-lvl[curr 15, max 2], RSSI[curr -75, avg -75, thresh -80..-70] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 15, max 2], RSSI[curr -72, avg -72, thresh -80..-70] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 15 (0 dBm): ms-pwr-lvl[curr 15, max 2], RSSI[curr -72, avg -72, thresh -80..-70] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 15, max 2], RSSI[curr -78, avg -78, thresh -80..-70] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 15 (0 dBm): ms-pwr-lvl[curr 15, max 2], RSSI[curr -78, avg -78, thresh -80..-70] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 15, max 2], RSSI[curr -75, avg -75, thresh -80..-70] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 15 (0 dBm): ms-pwr-lvl[curr 15, max 2], RSSI[curr -75, avg -75, thresh -80..-70] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 15, max 2], RSSI[curr -70, avg -70, thresh -80..-70] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 15 (0 dBm): ms-pwr-lvl[curr 15, max 2], RSSI[curr -70, avg -70, thresh -80..-70] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 15, max 2], RSSI[curr -80, avg -80, thresh -80..-70] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 15 (0 dBm): ms-pwr-lvl[curr 15, max 2], RSSI[curr -80, avg -80, thresh -80..-70] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 15, max 2], RSSI[curr -85, avg -85, thresh -80..-70] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 15 (0 dBm) => 13 (4 dBm): ms-pwr-lvl[curr 15, max 2], RSSI[curr -85, avg -85, thresh -80..-70] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 15, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 15 (0 dBm) => 13 (4 dBm): ms-pwr-lvl[curr 15, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 13, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 13 (4 dBm) => 11 (8 dBm): ms-pwr-lvl[curr 13, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 11, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 11 (8 dBm) => 9 (12 dBm): ms-pwr-lvl[curr 11, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 9, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 9 (12 dBm) => 7 (16 dBm): ms-pwr-lvl[curr 9, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 7, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 7 (16 dBm) => 5 (20 dBm): ms-pwr-lvl[curr 7, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 5, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 5 (20 dBm) => 3 (24 dBm): ms-pwr-lvl[curr 5, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 3, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 3 (24 dBm) => 2 (26 dBm): ms-pwr-lvl[curr 3, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 2, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 2 (26 dBm): ms-pwr-lvl[curr 2, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 15, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 15 (0 dBm) => 13 (4 dBm): ms-pwr-lvl[curr 15, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 13, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 13, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 13 (4 dBm) => 11 (8 dBm): ms-pwr-lvl[curr 13, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 11, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 11, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 11 (8 dBm) => 9 (12 dBm): ms-pwr-lvl[curr 11, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 9, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 9, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 9 (12 dBm) => 7 (16 dBm): ms-pwr-lvl[curr 9, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 7, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 15, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 15 (0 dBm) => 13 (4 dBm): ms-pwr-lvl[curr 15, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 13, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 13, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 13, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 13, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 13 (4 dBm) => 11 (8 dBm): ms-pwr-lvl[curr 13, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 11, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 11, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 11, max 2], RSSI[curr -90, avg -90, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 15, max 2], RSSI[curr -60, avg -60, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 15 (0 dBm): ms-pwr-lvl[curr 15, max 2], RSSI[curr -60, avg -60, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 15, max 2], RSSI[curr -100, avg -100, thresh -75..-75] dBm, C/I[curr 11, avg 11, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 15 (0 dBm) => 13 (4 dBm): ms-pwr-lvl[curr 15, max 2], RSSI[curr -100, avg -100, thresh -75..-75] dBm, C/I[curr 11, avg 11, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 13, max 2], RSSI[curr -100, avg -100, thresh -75..-75] dBm, C/I[curr 11, avg 11, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 13 (4 dBm) => 11 (8 dBm): ms-pwr-lvl[curr 13, max 2], RSSI[curr -100, avg -100, thresh -75..-75] dBm, C/I[curr 11, avg 11, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 11, max 2], RSSI[curr -60, avg -60, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Lowering MS power control level 11 (8 dBm) => 12 (6 dBm): ms-pwr-lvl[curr 11, max 2], RSSI[curr -60, avg -60, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 12, max 2], RSSI[curr -60, avg -60, thresh -75..-75] dBm, C/I[curr 17, avg 17, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Lowering MS power control level 12 (6 dBm) => 13 (4 dBm): ms-pwr-lvl[curr 12, max 2], RSSI[curr -60, avg -60, thresh -75..-75] dBm, C/I[curr 17, avg 17, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 13, max 2], RSSI[curr -100, avg -100, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Raising MS power control level 13 (4 dBm) => 11 (8 dBm): ms-pwr-lvl[curr 13, max 2], RSSI[curr -100, avg -100, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 11, max 2], RSSI[curr -100, avg -100, thresh -75..-75] dBm, C/I[curr 17, avg 17, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Lowering MS power control level 11 (8 dBm) => 12 (6 dBm): ms-pwr-lvl[curr 11, max 2], RSSI[curr -100, avg -100, thresh -75..-75] dBm, C/I[curr 17, avg 17, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 12, max 2], RSSI[curr -60, avg -60, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Lowering MS power control level 12 (6 dBm) => 13 (4 dBm): ms-pwr-lvl[curr 12, max 2], RSSI[curr -60, avg -60, thresh -75..-75] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 13, max 2], RSSI[curr -60, avg -60, thresh -75..-75] dBm, C/I[curr 17, avg 17, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Lowering MS power control level 13 (4 dBm) => 14 (2 dBm): ms-pwr-lvl[curr 13, max 2], RSSI[curr -60, avg -60, thresh -75..-75] dBm, C/I[curr 17, avg 17, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 9, max 2], RSSI[curr -78, avg -78, thresh -80..-73] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 9 (12 dBm): ms-pwr-lvl[curr 9, max 2], RSSI[curr -78, avg -78, thresh -80..-73] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 10, max 2], RSSI[curr -78, avg -78, thresh -80..-73] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 10 (10 dBm): ms-pwr-lvl[curr 10, max 2], RSSI[curr -78, avg -78, thresh -80..-73] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 9, max 2], RSSI[curr -78, avg -78, thresh -80..-73] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 9 (12 dBm): ms-pwr-lvl[curr 9, max 2], RSSI[curr -78, avg -78, thresh -80..-73] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 10, max 2], RSSI[curr -78, avg -78, thresh -80..-73] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 10 (10 dBm): ms-pwr-lvl[curr 10, max 2], RSSI[curr -78, avg -78, thresh -80..-73] dBm, C/I[curr 14, avg 14, thresh 12..16] dB +(bts=0,trx=0,ts=0,ss=0) Rx UL Measurement Report: ms-pwr-lvl[curr 9, max 2], RSSI[curr -78, avg -78, thresh -80..-73] dBm, C/I[curr 14, avg 14, thresh 12..16] dB (bts=0,trx=0,ts=0,ss=0) Keeping MS power at control level 9 (12 dBm): ms-pwr-lvl[curr 9, max 2], RSSI[curr -78, avg -78, thresh -80..-73] dBm, C/I[curr 14, avg 14, thresh 12..16] dB -- To view, visit https://gerrit.osmocom.org/c/osmo-bts/+/42061?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: merged Gerrit-Project: osmo-bts Gerrit-Branch: master Gerrit-Change-Id: I3b8466f062624fc8a2ea6f8220c057d3812f2c35 Gerrit-Change-Number: 42061 Gerrit-PatchSet: 2 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: osmith <osmith(a)sysmocom.de> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de>

1 0

[S] Change in osmo-ccid-firmware[master]: fix wait time extension handling
by laforge 09 Feb '26

09 Feb '26

laforge has submitted this change. ( https://gerrit.osmocom.org/c/osmo-ccid-firmware/+/42049?usp=email ) Change subject: fix wait time extension handling ...................................................................... fix wait time extension handling wait time ext byte was mishandled as sw1 and sw2, which broke transfers that took a long time, i.e. crypto ops during esim interactions. Closes: SYS#7869 Change-Id: I7527a4337ae857b9b2a4e982606fac770e677d73 --- M ccid_common/iso7816_fsm.c 1 file changed, 14 insertions(+), 6 deletions(-) Approvals: Jenkins Builder: Verified jolly: Looks good to me, but someone else must approve laforge: Looks good to me, approved diff --git a/ccid_common/iso7816_fsm.c b/ccid_common/iso7816_fsm.c index 7b0ea5f..a035148 100644 --- a/ccid_common/iso7816_fsm.c +++ b/ccid_common/iso7816_fsm.c @@ -1488,12 +1488,19 @@ case ISO7816_E_RX_SINGLE: byte = get_rx_byte_evt(fi->proc.parent, data); LOGPFSML(fi, LOGL_DEBUG, "Received 0x%02x from UART\n", byte); - /* record byte */ - //msgb_apdu_sw(tfp->apdu) = byte << 8; - msgb_put_u8(tfp->tpdu, byte); - card_uart_set_rx_threshold(ip->uart, 1); - card_uart_ctrl(ip->uart, CUART_CTL_RX_TIMER_HINT, 1); - osmo_fsm_inst_state_chg(fi, TPDU_S_SW2, 0, 0); + if (byte == 0x60) { + /* NULL: wait for actual SW1 */ + card_uart_set_rx_threshold(ip->uart, 1); + card_uart_ctrl(ip->uart, CUART_CTL_RX_TIMER_HINT, 1); + osmo_fsm_inst_state_chg(fi, TPDU_S_SW1, 0, 0); + } else { + /* record byte */ + //msgb_apdu_sw(tfp->apdu) = byte << 8; + msgb_put_u8(tfp->tpdu, byte); + card_uart_set_rx_threshold(ip->uart, 1); + card_uart_ctrl(ip->uart, CUART_CTL_RX_TIMER_HINT, 1); + osmo_fsm_inst_state_chg(fi, TPDU_S_SW2, 0, 0); + } break; default: OSMO_ASSERT(0); @@ -1615,6 +1622,7 @@ .name = "SW1", .in_event_mask = S(ISO7816_E_RX_SINGLE), .out_state_mask = S(TPDU_S_INIT) | + S(TPDU_S_SW1) | S(TPDU_S_SW2), .action = tpdu_s_sw1_action, }, -- To view, visit https://gerrit.osmocom.org/c/osmo-ccid-firmware/+/42049?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: merged Gerrit-Project: osmo-ccid-firmware Gerrit-Branch: master Gerrit-Change-Id: I7527a4337ae857b9b2a4e982606fac770e677d73 Gerrit-Change-Number: 42049 Gerrit-PatchSet: 4 Gerrit-Owner: Hoernchen <ewild(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: jolly <andreas(a)eversberg.eu> Gerrit-Reviewer: laforge <laforge(a)osmocom.org>

1 0

[S] Change in osmo-ccid-firmware[master]: fix wait time extension handling
by laforge 09 Feb '26

09 Feb '26

Attention is currently required from: Hoernchen. laforge has posted comments on this change by Hoernchen. ( https://gerrit.osmocom.org/c/osmo-ccid-firmware/+/42049?usp=email ) Change subject: fix wait time extension handling ...................................................................... Patch Set 4: Code-Review+2 -- To view, visit https://gerrit.osmocom.org/c/osmo-ccid-firmware/+/42049?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: osmo-ccid-firmware Gerrit-Branch: master Gerrit-Change-Id: I7527a4337ae857b9b2a4e982606fac770e677d73 Gerrit-Change-Number: 42049 Gerrit-PatchSet: 4 Gerrit-Owner: Hoernchen <ewild(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: jolly <andreas(a)eversberg.eu> Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Attention: Hoernchen <ewild(a)sysmocom.de> Gerrit-Comment-Date: Mon, 09 Feb 2026 12:37:02 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes

1 0

2026

2025

2024

2023

2022

gerrit-log