December 2025 - gerrit-log - lists.osmocom.org

[L] Change in ...osmo-s1gw[master]: test: move S1AP PDU samples (blobs) into their own file
by fixeria 08 Dec '25

08 Dec '25

fixeria has submitted this change. ( https://gerrit.osmocom.org/c/erlang/osmo-s1gw/+/41611?usp=email ) Change subject: test: move S1AP PDU samples (blobs) into their own file ...................................................................... test: move S1AP PDU samples (blobs) into their own file This allows using these samples from other (upcoming) tests. Change-Id: I4b1d3f3a009009ab7620656a3b906e60481e47a1 --- M test/s1ap_proxy_test.erl A test/s1ap_samples.erl 2 files changed, 423 insertions(+), 396 deletions(-) Approvals: osmith: Looks good to me, approved Jenkins Builder: Verified pespin: Looks good to me, but someone else must approve diff --git a/test/s1ap_proxy_test.erl b/test/s1ap_proxy_test.erl index f21a227..8e05b99 100644 --- a/test/s1ap_proxy_test.erl +++ b/test/s1ap_proxy_test.erl @@ -100,8 +100,8 @@ %% ------------------------------------------------------------------ test_s1_setup(#{handler := Pid}) -> - SetupReq = s1_setup_req_pdu(), - SetupRsp = s1_setup_rsp_pdu(), + SetupReq = s1ap_samples:s1_setup_req_pdu(), + SetupRsp = s1ap_samples:s1_setup_rsp_pdu(), %% Expect the PDUs to be proxied unmodified [?_assertEqual({forward, SetupReq}, s1ap_proxy:process_pdu(Pid, SetupReq)), ?_assertEqual({forward, SetupRsp}, s1ap_proxy:process_pdu(Pid, SetupRsp)), @@ -117,14 +117,14 @@ test_e_rab_setup(#{handler := Pid}) -> %% [eNB <- MME] E-RAB SETUP REQUEST - SetupReqIn = e_rab_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), - SetupReqExp = e_rab_setup_req_pdu(?ADDR_A2U, ?TEID_A2U), + SetupReqIn = s1ap_samples:e_rab_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), + SetupReqExp = s1ap_samples:e_rab_setup_req_pdu(?ADDR_A2U, ?TEID_A2U), %% [eNB -> MME] E-RAB SETUP RESPONSE - SetupRspIn = e_rab_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), - SetupRspExp = e_rab_setup_rsp_pdu(?ADDR_C2U, ?TEID_C2U), + SetupRspIn = s1ap_samples:e_rab_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), + SetupRspExp = s1ap_samples:e_rab_setup_rsp_pdu(?ADDR_C2U, ?TEID_C2U), - [?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, s1_setup_req_pdu())), - ?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, s1_setup_rsp_pdu())), + [?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, s1ap_samples:s1_setup_req_pdu())), + ?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, s1ap_samples:s1_setup_rsp_pdu())), ?_assertEqual({forward, SetupReqExp}, s1ap_proxy:process_pdu(Pid, SetupReqIn)), ?_assertEqual({forward, SetupRspExp}, s1ap_proxy:process_pdu(Pid, SetupRspIn)), %% global counters @@ -151,8 +151,8 @@ pfcp_mock:mock_req(session_establish_req, PDU), %% eNB <- [S1GW <- MME] E-RAB SETUP REQUEST %% eNB -- [S1GW -> MME] E-RAB SETUP RESPONSE (failure) - SetupReqIn = e_rab_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), - SetupRspExp = e_rab_setup_rsp_fail_pdu(), + SetupReqIn = s1ap_samples:e_rab_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), + SetupRspExp = s1ap_samples:e_rab_setup_rsp_fail_pdu(), [?_assertEqual({reply, SetupRspExp}, s1ap_proxy:process_pdu(Pid, SetupReqIn)), ?_assertMetric(?S1GW_CTR_S1AP_PROXY_IN_PKT_ALL, 1), @@ -166,15 +166,15 @@ test_e_rab_setup_rsp_during_release(#{handler := Pid}) -> %% [eNB <- MME] E-RAB SETUP REQUEST - SetupReqIn = e_rab_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), - SetupReqExp = e_rab_setup_req_pdu(?ADDR_A2U, ?TEID_A2U), + SetupReqIn = s1ap_samples:e_rab_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), + SetupReqExp = s1ap_samples:e_rab_setup_req_pdu(?ADDR_A2U, ?TEID_A2U), %% [eNB -> MME] E-RAB SETUP RESPONSE - SetupRspIn = e_rab_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), - SetupRspExp = e_rab_setup_rsp_pdu(?ADDR_C2U, ?TEID_C2U), + SetupRspIn = s1ap_samples:e_rab_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), + SetupRspExp = s1ap_samples:e_rab_setup_rsp_pdu(?ADDR_C2U, ?TEID_C2U), %% [eNB <- MME] E-RAB RELEASE COMMAND - ReleaseCmd = e_rab_release_cmd_pdu(), + ReleaseCmd = s1ap_samples:e_rab_release_cmd_pdu(), %% [eNB -> MME] E-RAB RELEASE RESPONSE - ReleaseRsp = e_rab_release_rsp_pdu(), + ReleaseRsp = s1ap_samples:e_rab_release_rsp_pdu(), [%% MME orders allocation of an E-RAB ?_assertEqual({forward, SetupReqExp}, s1ap_proxy:process_pdu(Pid, SetupReqIn)), @@ -199,12 +199,12 @@ test_e_rab_setup_dup(#{handler := Pid}) -> %% [eNB <- MME] E-RAB SETUP REQUEST - SetupReqIn = e_rab_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), + SetupReqIn = s1ap_samples:e_rab_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), %% [eNB -> MME] E-RAB SETUP RESPONSE - SetupRspIn = e_rab_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), + SetupRspIn = s1ap_samples:e_rab_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), %% eNB <- [S1GW <- MME] E-RAB SETUP REQUEST (duplicate) %% eNB -- [S1GW -> MME] E-RAB SETUP RESPONSE (failure) - SetupRspExp = e_rab_setup_rsp_fail_pdu(), + SetupRspExp = s1ap_samples:e_rab_setup_rsp_fail_pdu(), [?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, SetupReqIn)), ?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, SetupRspIn)), @@ -216,13 +216,13 @@ test_e_rab_release_cmd(#{handler := Pid}) -> %% [eNB <- MME] E-RAB SETUP REQUEST - SetupReq = e_rab_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), + SetupReq = s1ap_samples:e_rab_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), %% [eNB -> MME] E-RAB SETUP RESPONSE - SetupRsp = e_rab_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), + SetupRsp = s1ap_samples:e_rab_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), %% [eNB <- MME] E-RAB RELEASE COMMAND - ReleaseCmd = e_rab_release_cmd_pdu(), + ReleaseCmd = s1ap_samples:e_rab_release_cmd_pdu(), %% [eNB -> MME] E-RAB RELEASE RESPONSE - ReleaseRsp = e_rab_release_rsp_pdu(), + ReleaseRsp = s1ap_samples:e_rab_release_rsp_pdu(), [?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, SetupReq)), ?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, SetupRsp)), @@ -240,11 +240,11 @@ test_e_rab_release_ind(#{handler := Pid}) -> %% [eNB <- MME] E-RAB SETUP REQUEST - SetupReq = e_rab_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), + SetupReq = s1ap_samples:e_rab_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), %% [eNB -> MME] E-RAB SETUP RESPONSE - SetupRsp = e_rab_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), + SetupRsp = s1ap_samples:e_rab_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), %% [eNB -> MME] E-RAB RELEASE INDICATION - ReleaseInd = e_rab_release_ind_pdu(), + ReleaseInd = s1ap_samples:e_rab_release_ind_pdu(), [?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, SetupReq)), ?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, SetupRsp)), @@ -258,18 +258,18 @@ test_e_rab_modify_req_rsp(#{handler := Pid}) -> %% [eNB <- MME] E-RAB SETUP REQUEST - SetupReq = e_rab_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), + SetupReq = s1ap_samples:e_rab_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), %% [eNB -> MME] E-RAB SETUP RESPONSE - SetupRsp = e_rab_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), + SetupRsp = s1ap_samples:e_rab_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), %% eNB <- [S1GW <- MME] E-RAB MODIFY REQUEST (new F-TEID) - ModifyReqIn = e_rab_modify_req_pdu(?ADDR_U2CM, ?TEID_U2CM), + ModifyReqIn = s1ap_samples:e_rab_modify_req_pdu(?ADDR_U2CM, ?TEID_U2CM), %% [eNB <- S1GW] <- MME E-RAB MODIFY REQUEST %% for the eNB F-TEID remains unchanged - ModifyReqExp = e_rab_modify_req_pdu(?ADDR_A2U, ?TEID_A2U), + ModifyReqExp = s1ap_samples:e_rab_modify_req_pdu(?ADDR_A2U, ?TEID_A2U), %% [eNB -> MME] E-RAB MODIFY RESPONSE - ModifyRsp = e_rab_modify_rsp_pdu(), + ModifyRsp = s1ap_samples:e_rab_modify_rsp_pdu(), %% [eNB -> MME] E-RAB RELEASE INDICATION - ReleaseInd = e_rab_release_ind_pdu(), + ReleaseInd = s1ap_samples:e_rab_release_ind_pdu(), [?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, SetupReq)), ?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, SetupRsp)), @@ -287,15 +287,15 @@ test_e_rab_modify_req_rsp_fail(#{handler := Pid}) -> %% [eNB <- MME] E-RAB SETUP REQUEST - SetupReq = e_rab_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), + SetupReq = s1ap_samples:e_rab_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), %% [eNB -> MME] E-RAB SETUP RESPONSE - SetupRsp = e_rab_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), + SetupRsp = s1ap_samples:e_rab_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), %% [eNB <- MME] E-RAB MODIFY REQUEST (new F-TEID) - ModifyReq = e_rab_modify_req_pdu(?ADDR_U2CM, ?TEID_U2CM), + ModifyReq = s1ap_samples:e_rab_modify_req_pdu(?ADDR_U2CM, ?TEID_U2CM), %% [eNB -> MME] E-RAB MODIFY RESPONSE (failure) - ModifyRsp = e_rab_modify_rsp_fail_pdu(), + ModifyRsp = s1ap_samples:e_rab_modify_rsp_fail_pdu(), %% [eNB -> MME] E-RAB RELEASE INDICATION - ReleaseInd = e_rab_release_ind_pdu(), + ReleaseInd = s1ap_samples:e_rab_release_ind_pdu(), [?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, SetupReq)), ?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, SetupRsp)), @@ -313,18 +313,18 @@ test_e_rab_modify_ind_cnf_modified(#{handler := Pid}) -> %% [eNB <- MME] E-RAB SETUP REQUEST - SetupReq = e_rab_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), + SetupReq = s1ap_samples:e_rab_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), %% [eNB -> MME] E-RAB SETUP RESPONSE - SetupRsp = e_rab_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), + SetupRsp = s1ap_samples:e_rab_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), %% [eNB -> S1GW] -> MME E-RAB MODIFICATION INDICATION (new F-TEID) - ModifyIndIn = e_rab_modify_ind_pdu(?ADDR_U2AM, ?TEID_U2AM), + ModifyIndIn = s1ap_samples:e_rab_modify_ind_pdu(?ADDR_U2AM, ?TEID_U2AM), %% eNB -> [S1GW -> MME] E-RAB MODIFICATION INDICATION %% for the MME F-TEID remains unchanged - ModifyIndExp = e_rab_modify_ind_pdu(?ADDR_C2U, ?TEID_C2U), + ModifyIndExp = s1ap_samples:e_rab_modify_ind_pdu(?ADDR_C2U, ?TEID_C2U), %% [eNB <- MME] E-RAB MODIFICATION CONFIRMATION - ModifyCnf = e_rab_modify_cnf_pdu(modified), + ModifyCnf = s1ap_samples:e_rab_modify_cnf_pdu(modified), %% [eNB -> MME] E-RAB RELEASE INDICATION - ReleaseInd = e_rab_release_ind_pdu(), + ReleaseInd = s1ap_samples:e_rab_release_ind_pdu(), [?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, SetupReq)), ?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, SetupRsp)), @@ -342,18 +342,18 @@ test_e_rab_modify_ind_cnf_not_modified(#{handler := Pid}) -> %% [eNB <- MME] E-RAB SETUP REQUEST - SetupReq = e_rab_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), + SetupReq = s1ap_samples:e_rab_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), %% [eNB -> MME] E-RAB SETUP RESPONSE - SetupRsp = e_rab_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), + SetupRsp = s1ap_samples:e_rab_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), %% [eNB -> S1GW] -> MME E-RAB MODIFICATION INDICATION (new F-TEID) - ModifyIndIn = e_rab_modify_ind_pdu(?ADDR_U2AM, ?TEID_U2AM), + ModifyIndIn = s1ap_samples:e_rab_modify_ind_pdu(?ADDR_U2AM, ?TEID_U2AM), %% eNB -> [S1GW -> MME] E-RAB MODIFICATION INDICATION %% for the MME F-TEID remains unchanged - ModifyIndExp = e_rab_modify_ind_pdu(?ADDR_C2U, ?TEID_C2U), + ModifyIndExp = s1ap_samples:e_rab_modify_ind_pdu(?ADDR_C2U, ?TEID_C2U), %% [eNB <- MME] E-RAB MODIFICATION CONFIRMATION - ModifyCnf = e_rab_modify_cnf_pdu(not_modified), + ModifyCnf = s1ap_samples:e_rab_modify_cnf_pdu(not_modified), %% [eNB -> MME] E-RAB RELEASE INDICATION - ReleaseInd = e_rab_release_ind_pdu(), + ReleaseInd = s1ap_samples:e_rab_release_ind_pdu(), [?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, SetupReq)), ?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, SetupRsp)), @@ -371,16 +371,16 @@ test_e_rab_modify_ind_cnf_release(#{handler := Pid}) -> %% [eNB <- MME] E-RAB SETUP REQUEST - SetupReq = e_rab_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), + SetupReq = s1ap_samples:e_rab_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), %% [eNB -> MME] E-RAB SETUP RESPONSE - SetupRsp = e_rab_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), + SetupRsp = s1ap_samples:e_rab_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), %% [eNB -> S1GW] -> MME E-RAB MODIFICATION INDICATION (new F-TEID) - ModifyIndIn = e_rab_modify_ind_pdu(?ADDR_U2AM, ?TEID_U2AM), + ModifyIndIn = s1ap_samples:e_rab_modify_ind_pdu(?ADDR_U2AM, ?TEID_U2AM), %% eNB -> [S1GW -> MME] E-RAB MODIFICATION INDICATION %% for the MME F-TEID remains unchanged - ModifyIndExp = e_rab_modify_ind_pdu(?ADDR_C2U, ?TEID_C2U), + ModifyIndExp = s1ap_samples:e_rab_modify_ind_pdu(?ADDR_C2U, ?TEID_C2U), %% [eNB <- MME] E-RAB MODIFICATION CONFIRMATION - ModifyCnf = e_rab_modify_cnf_pdu(release), + ModifyCnf = s1ap_samples:e_rab_modify_cnf_pdu(release), [?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, SetupReq)), ?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, SetupRsp)), @@ -397,14 +397,14 @@ test_initial_context_setup(#{handler := Pid}) -> %% [eNB <- MME] INITIAL CONTEXT SETUP REQUEST - InitCtxSetupReqIn = initial_context_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), - InitCtxSetupReqExp = initial_context_setup_req_pdu(?ADDR_A2U, ?TEID_A2U), + InitCtxSetupReqIn = s1ap_samples:initial_context_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), + InitCtxSetupReqExp = s1ap_samples:initial_context_setup_req_pdu(?ADDR_A2U, ?TEID_A2U), %% [eNB -> MME] INITIAL CONTEXT SETUP RESPONSE - InitCtxSetupRspIn = initial_context_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), - InitCtxSetupRspExp = initial_context_setup_rsp_pdu(?ADDR_C2U, ?TEID_C2U), + InitCtxSetupRspIn = s1ap_samples:initial_context_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), + InitCtxSetupRspExp = s1ap_samples:initial_context_setup_rsp_pdu(?ADDR_C2U, ?TEID_C2U), - [?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, s1_setup_req_pdu())), - ?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, s1_setup_rsp_pdu())), + [?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, s1ap_samples:s1_setup_req_pdu())), + ?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, s1ap_samples:s1_setup_rsp_pdu())), ?_assertEqual({forward, InitCtxSetupReqExp}, s1ap_proxy:process_pdu(Pid, InitCtxSetupReqIn)), ?_assertEqual({forward, InitCtxSetupRspExp}, s1ap_proxy:process_pdu(Pid, InitCtxSetupRspIn)), %% global counters @@ -427,9 +427,9 @@ test_initial_context_setup_dup(#{handler := Pid}) -> %% [eNB <- MME] INITIAL CONTEXT SETUP REQUEST - InitCtxSetupReqIn = initial_context_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), + InitCtxSetupReqIn = s1ap_samples:initial_context_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), %% [eNB -> MME] INITIAL CONTEXT SETUP RESPONSE - InitCtxSetupRspIn = initial_context_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), + InitCtxSetupRspIn = s1ap_samples:initial_context_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), [?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, InitCtxSetupReqIn)), ?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, InitCtxSetupRspIn)), @@ -441,17 +441,17 @@ test_initial_context_setup_rsp_during_release(#{handler := Pid}) -> %% [eNB <- MME] INITIAL CONTEXT SETUP REQUEST - InitCtxSetupReq = initial_context_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), - InitCtxSetupReqExp = initial_context_setup_req_pdu(?ADDR_A2U, ?TEID_A2U), + InitCtxSetupReq = s1ap_samples:initial_context_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), + InitCtxSetupReqExp = s1ap_samples:initial_context_setup_req_pdu(?ADDR_A2U, ?TEID_A2U), %% [eNB -> MME] INITIAL CONTEXT SETUP RESPONSE - InitCtxSetupRsp = initial_context_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), - InitCtxSetupRspExp = initial_context_setup_rsp_pdu(?ADDR_C2U, ?TEID_C2U), + InitCtxSetupRsp = s1ap_samples:initial_context_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), + InitCtxSetupRspExp = s1ap_samples:initial_context_setup_rsp_pdu(?ADDR_C2U, ?TEID_C2U), %% [eNB -> MME] UE CONTEXT RELEASE REQUEST - UeCtxReleaseReq = ue_ctx_release_req_pdu(), + UeCtxReleaseReq = s1ap_samples:ue_ctx_release_req_pdu(), %% [eNB <- MME] UE CONTEXT RELEASE COMMAND - UeCtxReleaseCmd = ue_ctx_release_cmd_pdu(), + UeCtxReleaseCmd = s1ap_samples:ue_ctx_release_cmd_pdu(), %% [eNB -> MME] UE CONTEXT RELEASE COMPLETE - UeCtxReleaseCompl = ue_ctx_release_compl_pdu(), + UeCtxReleaseCompl = s1ap_samples:ue_ctx_release_compl_pdu(), [%% MME orders creation of the UE context ?_assertMatch({forward, InitCtxSetupReqExp}, s1ap_proxy:process_pdu(Pid, InitCtxSetupReq)), @@ -479,9 +479,9 @@ test_handover_preparation(#{handler := Pid}) -> %% [eNB -> MME] HANDOVER REQUIRED - HandoverRqd = handover_required(), + HandoverRqd = s1ap_samples:handover_required_pdu(), %% [MME -> eNB] HANDOVER COMMAND - HandoverCmd = handover_command(), + HandoverCmd = s1ap_samples:handover_command_pdu(), [?_assertMatch({forward, HandoverRqd}, s1ap_proxy:process_pdu(Pid, HandoverRqd)), ?_assertMatch({forward, HandoverCmd}, s1ap_proxy:process_pdu(Pid, HandoverCmd)), @@ -494,14 +494,14 @@ test_handover_res_alloc(#{handler := Pid}) -> %% [MME -> eNB] HANDOVER REQUEST - HandoverReqIn = handover_request(?ADDR_U2C, ?TEID_U2C), - HandoverReqExp = handover_request(?ADDR_A2U, ?TEID_A2U), + HandoverReqIn = s1ap_samples:handover_request_pdu(?ADDR_U2C, ?TEID_U2C), + HandoverReqExp = s1ap_samples:handover_request_pdu(?ADDR_A2U, ?TEID_A2U), %% [eNB -> MME] HANDOVER REQUEST ACKNOWLEDGE - HandoverAckIn = handover_request_ack(?ADDR_U2A, ?TEID_U2A), - HandoverAckExp = handover_request_ack(?ADDR_C2U, ?TEID_C2U), + HandoverAckIn = s1ap_samples:handover_request_ack_pdu(?ADDR_U2A, ?TEID_U2A), + HandoverAckExp = s1ap_samples:handover_request_ack_pdu(?ADDR_C2U, ?TEID_C2U), - [?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, s1_setup_req_pdu())), - ?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, s1_setup_rsp_pdu())), + [?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, s1ap_samples:s1_setup_req_pdu())), + ?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, s1ap_samples:s1_setup_rsp_pdu())), ?_assertEqual({forward, HandoverReqExp}, s1ap_proxy:process_pdu(Pid, HandoverReqIn)), ?_assertEqual({forward, HandoverAckExp}, s1ap_proxy:process_pdu(Pid, HandoverAckIn)), %% global counters @@ -523,11 +523,11 @@ test_ue_ctx_release_req(#{handler := Pid}) -> %% [eNB <- MME] INITIAL CONTEXT SETUP REQUEST - InitCtxSetupReq = initial_context_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), + InitCtxSetupReq = s1ap_samples:initial_context_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), %% [eNB -> MME] INITIAL CONTEXT SETUP RESPONSE - InitCtxSetupRsp = initial_context_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), + InitCtxSetupRsp = s1ap_samples:initial_context_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), %% [eNB -> MME] UE CONTEXT RELEASE REQUEST - UeCtxReleaseReq = ue_ctx_release_req_pdu(), + UeCtxReleaseReq = s1ap_samples:ue_ctx_release_req_pdu(), [?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, InitCtxSetupReq)), ?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, InitCtxSetupRsp)), @@ -544,13 +544,13 @@ test_ue_ctx_release_cmd(#{handler := Pid}) -> %% [eNB <- MME] INITIAL CONTEXT SETUP REQUEST - InitCtxSetupReq = initial_context_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), + InitCtxSetupReq = s1ap_samples:initial_context_setup_req_pdu(?ADDR_U2C, ?TEID_U2C), %% [eNB -> MME] INITIAL CONTEXT SETUP RESPONSE - InitCtxSetupRsp = initial_context_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), + InitCtxSetupRsp = s1ap_samples:initial_context_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), %% [eNB <- MME] UE CONTEXT RELEASE COMMAND - UeCtxReleaseCmd = ue_ctx_release_cmd_pdu(), + UeCtxReleaseCmd = s1ap_samples:ue_ctx_release_cmd_pdu(), %% [eNB -> MME] UE CONTEXT RELEASE COMPLETE - UeCtxReleaseCompl = ue_ctx_release_compl_pdu(), + UeCtxReleaseCompl = s1ap_samples:ue_ctx_release_compl_pdu(), [?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, InitCtxSetupReq)), ?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, InitCtxSetupRsp)), @@ -574,10 +574,10 @@ test_drop_proc_error(#{handler := Pid}) -> %% [eNB -> MME] INITIAL CONTEXT SETUP RESPONSE - InitCtxSetupRsp = initial_context_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), + InitCtxSetupRsp = s1ap_samples:initial_context_setup_rsp_pdu(?ADDR_U2A, ?TEID_U2A), - [?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, s1_setup_req_pdu())), - ?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, s1_setup_rsp_pdu())), + [?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, s1ap_samples:s1_setup_req_pdu())), + ?_assertMatch({forward, _}, s1ap_proxy:process_pdu(Pid, s1ap_samples:s1_setup_rsp_pdu())), %% INITIAL CONTEXT SETUP RESPONSE without prior request %% "Failed to process INITIAL CONTEXT SETUP RESPONSE: erab_not_registered" ?_assertMatch({drop, _}, s1ap_proxy:process_pdu(Pid, InitCtxSetupRsp)), @@ -591,313 +591,4 @@ ?_assertMetricENB(?S1GW_CTR_S1AP_PROXY_IN_PKT_DROP_ALL, 1)]. -%% ------------------------------------------------------------------ -%% S1AP PDU templates -%% ------------------------------------------------------------------ - -%% S1 SETUP REQUEST -s1_setup_req_pdu() -> - << 16#00, 16#11, 16#00, 16#1a, 16#00, 16#00, 16#02, 16#00, - 16#3b, 16#40, 16#08, 16#00, 16#00, 16#f1, 16#10, 16#00, - 16#00, 16#00, 16#00, 16#00, 16#40, 16#00, 16#07, 16#00, - 16#0c, 16#0e, 16#40, 16#00, 16#f1, 16#10 - >>. - - -%% S1 SETUP RESPONSE -s1_setup_rsp_pdu() -> - << 16#20, 16#11, 16#00, 16#29, 16#00, 16#00, 16#03, 16#00, - 16#3d, 16#40, 16#0e, 16#05, 16#80, 16#6f, 16#70, 16#65, - 16#6e, 16#35, 16#67, 16#73, 16#2d, 16#6d, 16#6d, 16#65, - 16#30, 16#00, 16#69, 16#00, 16#0b, 16#00, 16#00, 16#00, - 16#f1, 16#10, 16#00, 16#00, 16#00, 16#02, 16#00, 16#01, - 16#00, 16#57, 16#40, 16#01, 16#ff - >>. - - -%% [eNB <- MME] E-RAB SETUP REQUEST -e_rab_setup_req_pdu(TLA, TEID) when is_binary(TLA), - is_integer(TEID) -> - << 16#00, 16#05, 16#00, 16#80, 16#9b, 16#00, 16#00, 16#03, - 16#00, 16#00, 16#00, 16#02, 16#00, 16#07, 16#00, 16#08, - 16#00, 16#02, 16#00, 16#09, 16#00, 16#10, 16#00, 16#80, - 16#87, 16#00, 16#00, 16#11, 16#00, 16#80, 16#81, 16#0c, - 16#00, 16#05, 16#04, 16#0f, 16#80, - TLA/bytes, %% transportLayerAddress (IPv4) - TEID:32/big, %% GTP-TEID - 16#72, 16#27, 16#c8, - 16#1a, 16#bc, 16#ec, 16#11, 16#62, 16#54, 16#c1, 16#01, - 16#05, 16#04, 16#03, 16#69, 16#6d, 16#73, 16#05, 16#01, - 16#c0, 16#a8, 16#65, 16#02, 16#5e, 16#02, 16#b3, 16#8c, - 16#58, 16#32, 16#27, 16#54, 16#80, 16#80, 16#21, 16#10, - 16#02, 16#00, 16#00, 16#10, 16#81, 16#06, 16#08, 16#08, - 16#08, 16#08, 16#83, 16#06, 16#08, 16#08, 16#04, 16#04, - 16#00, 16#0d, 16#04, 16#08, 16#08, 16#08, 16#08, 16#00, - 16#0d, 16#04, 16#08, 16#08, 16#04, 16#04, 16#00, 16#03, - 16#10, 16#20, 16#01, 16#48, 16#60, 16#48, 16#60, 16#00, - 16#00, 16#00, 16#00, 16#00, 16#00, 16#00, 16#00, 16#88, - 16#88, 16#00, 16#03, 16#10, 16#20, 16#01, 16#48, 16#60, - 16#48, 16#60, 16#00, 16#00, 16#00, 16#00, 16#00, 16#00, - 16#00, 16#00, 16#88, 16#44, 16#00, 16#0c, 16#04, 16#ac, - 16#16, 16#00, 16#15, 16#00, 16#10, 16#02, 16#05, 16#78 - >>. - - -%% [eNB -> MME] E-RAB SETUP RESPONSE -e_rab_setup_rsp_pdu(TLA, TEID) when is_binary(TLA), - is_integer(TEID) -> - << 16#20, 16#05, 16#00, 16#22, 16#00, 16#00, 16#03, 16#00, - 16#00, 16#40, 16#02, 16#00, 16#07, 16#00, 16#08, 16#40, - 16#02, 16#00, 16#09, 16#00, 16#1c, 16#40, 16#0f, 16#00, - 16#00, 16#27, 16#40, 16#0a, 16#0c, 16#1f, - TLA/bytes, %% transportLayerAddress (IPv4) - TEID:32/big %% GTP-TEID - >>. - - -%% [S1GW -> MME] E-RAB SETUP RESPONSE (failure) -%% Transport-cause: transport-resource-unavailable -e_rab_setup_rsp_fail_pdu() -> - << 16#20, 16#05, 16#00, 16#1a, 16#00, 16#00, 16#03, 16#00, - 16#00, 16#40, 16#02, 16#00, 16#07, 16#00, 16#08, 16#40, - 16#02, 16#00, 16#09, 16#00, 16#1d, 16#40, 16#07, 16#00, - 16#00, 16#23, 16#40, 16#02, 16#0c, 16#20 - >>. - - -%% [eNB <- MME] E-RAB RELEASE COMMAND -%% TODO: make E-RAB IDs configurable -e_rab_release_cmd_pdu() -> - << 16#00, 16#07, 16#00, 16#1a, 16#00, 16#00, 16#03, 16#00, - 16#00, 16#00, 16#02, 16#00, 16#07, 16#00, 16#08, 16#00, - 16#02, 16#00, 16#09, 16#00, 16#21, 16#40, 16#07, 16#00, - 16#00, 16#23, 16#40, 16#02, 16#0c, 16#40 - >>. - - -%% [eNB -> MME] E-RAB RELEASE RESPONSE -%% TODO: make E-RAB IDs configurable -e_rab_release_rsp_pdu() -> - << 16#20, 16#07, 16#00, 16#19, 16#00, 16#00, 16#03, 16#00, - 16#00, 16#00, 16#02, 16#00, 16#07, 16#00, 16#08, 16#00, - 16#02, 16#00, 16#09, 16#00, 16#45, 16#40, 16#06, 16#00, - 16#00, 16#0f, 16#40, 16#01, 16#0c - >>. - - -%% [eNB -> MME] E-RAB RELEASE INDICATION -%% TODO: make E-RAB IDs configurable -e_rab_release_ind_pdu() -> - << 16#00, 16#08, 16#00, 16#1a, 16#00, 16#00, 16#03, 16#00, - 16#00, 16#00, 16#02, 16#00, 16#07, 16#00, 16#08, 16#00, - 16#02, 16#00, 16#09, 16#00, 16#6e, 16#40, 16#07, 16#00, - 16#00, 16#23, 16#40, 16#02, 16#0c, 16#40 - >>. - - -%% [eNB <- MME] E-RAB MODIFY REQUEST -e_rab_modify_req_pdu(TLA, TEID) when is_binary(TLA), - is_integer(TEID) -> - << 16#00, 16#06, 16#00, 16#2d, 16#00, 16#00, 16#03, 16#00, - 16#00, 16#00, 16#02, 16#00, 16#07, 16#00, 16#08, 16#00, - 16#02, 16#00, 16#09, 16#00, 16#1e, 16#00, 16#1a, 16#00, - 16#00, 16#24, 16#00, 16#15, 16#4c, 16#00, 16#05, 16#04, - 16#00, 16#00, 16#00, 16#00, 16#b9, 16#00, 16#0a, 16#07, - 16#c0, - TLA/bytes, %% transportLayerAddress (IPv4) - TEID:32/big %% GTP-TEID - >>. - - -%% [eNB -> MME] E-RAB MODIFY RESPONSE (success) -e_rab_modify_rsp_pdu() -> - << 16#20, 16#06, 16#00, 16#19, 16#00, 16#00, 16#03, 16#00, - 16#00, 16#40, 16#02, 16#00, 16#07, 16#00, 16#08, 16#40, - 16#02, 16#00, 16#09, 16#00, 16#1f, 16#40, 16#06, 16#00, - 16#00, 16#25, 16#40, 16#01, 16#0c - >>. - - -%% [eNB -> MME] E-RAB MODIFY RESPONSE (failure) -e_rab_modify_rsp_fail_pdu() -> - << 16#20, 16#06, 16#00, 16#1a, 16#00, 16#00, 16#03, 16#00, - 16#00, 16#40, 16#02, 16#00, 16#07, 16#00, 16#08, 16#40, - 16#02, 16#00, 16#09, 16#00, 16#20, 16#40, 16#07, 16#00, - 16#00, 16#23, 16#40, 16#02, 16#0c, 16#40 - >>. - - -%% [eNB -> MME] E-RAB MODIFICATION INDICATION -e_rab_modify_ind_pdu(TLA, TEID) when is_binary(TLA), - is_integer(TEID) -> - << 16#00, 16#32, 16#00, 16#22, 16#00, 16#00, 16#03, 16#00, - 16#00, 16#00, 16#02, 16#00, 16#07, 16#00, 16#08, 16#00, - 16#02, 16#00, 16#09, 16#00, 16#c7, 16#00, 16#0f, 16#00, - 16#00, 16#c8, 16#00, 16#0a, 16#0c, 16#1f, - TLA/bytes, %% transportLayerAddress (IPv4) - TEID:32/big %% GTP-TEID - >>. - - -%% [eNB -> MME] E-RAB MODIFICATION CONFIRMATION -e_rab_modify_cnf_pdu(Res) -> - IEs = case Res of - modified -> - << 16#00, 16#cb, 16#40, 16#06, 16#00, - 16#00, 16#cc, 16#40, 16#01, 16#0c >>; - not_modified -> - %% cause: transport: transport-resource-unavailable (0) - << 16#00, 16#cd, 16#40, 16#07, 16#00, - 16#00, 16#23, 16#40, 16#02, 16#0c, 16#20 >>; - release -> - %% cause: transport: transport-resource-unavailable (0) - << 16#00, 16#d2, 16#40, 16#07, 16#00, - 16#00, 16#23, 16#40, 16#02, 16#0c, 16#20 >> - end, - << 16#20, 16#32, 16#00, (15 + byte_size(IEs)), - 16#00, 16#00, 16#03, 16#00, 16#00, 16#40, 16#02, 16#00, - 16#07, 16#00, 16#08, 16#40, 16#02, 16#00, 16#09, - IEs/bytes - >>. - - -%% [eNB <- MME] INITIAL CONTEXT SETUP REQUEST -initial_context_setup_req_pdu(TLA, TEID) when is_binary(TLA), - is_integer(TEID) -> - << 16#00, 16#09, 16#00, 16#81, 16#10, 16#00, 16#00, 16#07, - 16#00, 16#00, 16#00, 16#02, 16#00, 16#01, 16#00, 16#08, - 16#00, 16#02, 16#00, 16#01, 16#00, 16#42, 16#00, 16#0a, - 16#18, 16#3b, 16#9a, 16#ca, 16#00, 16#60, 16#3b, 16#9a, - 16#ca, 16#00, 16#00, 16#18, 16#00, 16#80, 16#b5, 16#00, - 16#00, 16#34, 16#00, 16#80, 16#af, 16#45, 16#00, 16#09, - 16#20, 16#0f, 16#80, - TLA/bytes, %% transportLayerAddress (IPv4) - TEID:32/big, %% GTP-TEID - 16#80, 16#9f, 16#27, 16#bd, 16#de, - 16#61, 16#4e, 16#02, 16#07, 16#42, 16#02, 16#29, 16#06, - 16#40, 16#32, 16#f8, 16#10, 16#00, 16#01, 16#00, 16#6e, - 16#52, 16#05, 16#c1, 16#01, 16#09, 16#09, 16#08, 16#69, - 16#6e, 16#74, 16#65, 16#72, 16#6e, 16#65, 16#74, 16#05, - 16#01, 16#c0, 16#a8, 16#64, 16#02, 16#5e, 16#06, 16#fe, - 16#fe, 16#fa, 16#fa, 16#02, 16#02, 16#58, 16#32, 16#27, - 16#4d, 16#80, 16#80, 16#21, 16#10, 16#02, 16#00, 16#00, - 16#10, 16#81, 16#06, 16#08, 16#08, 16#08, 16#08, 16#83, - 16#06, 16#08, 16#08, 16#04, 16#04, 16#00, 16#0d, 16#04, - 16#08, 16#08, 16#08, 16#08, 16#00, 16#0d, 16#04, 16#08, - 16#08, 16#04, 16#04, 16#00, 16#03, 16#10, 16#20, 16#01, - 16#48, 16#60, 16#48, 16#60, 16#00, 16#00, 16#00, 16#00, - 16#00, 16#00, 16#00, 16#00, 16#88, 16#88, 16#00, 16#03, - 16#10, 16#20, 16#01, 16#48, 16#60, 16#48, 16#60, 16#00, - 16#00, 16#00, 16#00, 16#00, 16#00, 16#00, 16#00, 16#88, - 16#44, 16#00, 16#10, 16#02, 16#05, 16#aa, 16#50, 16#0b, - 16#f6, 16#32, 16#f8, 16#10, 16#00, 16#02, 16#01, 16#c0, - 16#00, 16#02, 16#86, 16#13, 16#32, 16#f8, 16#10, 16#00, - 16#01, 16#23, 16#05, 16#f4, 16#04, 16#94, 16#25, 16#f8, - 16#64, 16#02, 16#01, 16#08, 16#00, 16#6b, 16#00, 16#05, - 16#1c, 16#00, 16#0e, 16#00, 16#00, 16#00, 16#49, 16#00, - 16#20, 16#57, 16#5d, 16#d3, 16#66, 16#69, 16#73, 16#4c, - 16#8c, 16#48, 16#42, 16#76, 16#5f, 16#fe, 16#f9, 16#bd, - 16#d5, 16#89, 16#08, 16#ae, 16#f6, 16#f4, 16#88, 16#62, - 16#22, 16#d7, 16#80, 16#fb, 16#36, 16#33, 16#d9, 16#9e, - 16#9f, 16#00, 16#c0, 16#40, 16#08, 16#35, 16#87, 16#61, - 16#10, 16#03, 16#ff, 16#ff, 16#74 - >>. - - -%% [eNB -> MME] INITIAL CONTEXT SETUP RESPONSE -initial_context_setup_rsp_pdu(TLA, TEID) when is_binary(TLA), - is_integer(TEID) -> - << 16#20, 16#09, 16#00, 16#22, 16#00, 16#00, 16#03, 16#00, - 16#00, 16#40, 16#02, 16#00, 16#01, 16#00, 16#08, 16#40, - 16#02, 16#00, 16#01, 16#00, 16#33, 16#40, 16#0f, 16#00, - 16#00, 16#32, 16#40, 16#0a, 16#0a, 16#1f, - TLA/bytes, %% transportLayerAddress (IPv4) - TEID:32/big %% GTP-TEID - >>. - - -%% [eNB -> MME] UE CONTEXT RELEASE REQUEST -ue_ctx_release_req_pdu() -> - << 16#00, 16#12, 16#40, 16#14, 16#00, 16#00, 16#03, 16#00, - 16#00, 16#00, 16#02, 16#00, 16#01, 16#00, 16#08, 16#00, - 16#02, 16#00, 16#01, 16#00, 16#02, 16#40, 16#01, 16#20 - >>. - - -%% [eNB <- MME] UE CONTEXT RELEASE COMMAND -ue_ctx_release_cmd_pdu() -> - << 16#00, 16#17, 16#00, 16#10, 16#00, 16#00, 16#02, 16#00, - 16#63, 16#00, 16#04, 16#00, 16#01, 16#00, 16#01, 16#00, - 16#02, 16#40, 16#01, 16#20 - >>. - - -%% [eNB -> MME] UE CONTEXT RELEASE COMPLETE -ue_ctx_release_compl_pdu() -> - << 16#20, 16#17, 16#00, 16#0f, 16#00, 16#00, 16#02, 16#00, - 16#00, 16#40, 16#02, 16#00, 16#01, 16#00, 16#08, 16#40, - 16#02, 16#00, 16#01 - >>. - - -%% [eNB -> MME] HANDOVER REQUIRED -handover_required() -> - << 16#00, 16#00, 16#00, 16#35, 16#00, 16#00, 16#06, 16#00, - 16#00, 16#00, 16#03, 16#40, 16#10, 16#92, 16#00, 16#08, - 16#00, 16#02, 16#00, 16#00, 16#00, 16#01, 16#00, 16#01, - 16#00, 16#00, 16#02, 16#40, 16#02, 16#04, 16#20, 16#00, - 16#04, 16#00, 16#0e, 16#00, 16#62, 16#f2, 16#10, 16#40, - 16#00, 16#00, 16#00, 16#00, 16#62, 16#f2, 16#10, 16#00, - 16#07, 16#00, 16#68, 16#00, 16#04, 16#03, 16#12, 16#34, - 16#56 - >>. - - -%% [MME -> eNB] HANDOVER COMMAND -handover_command() -> - << 16#20, 16#00, 16#00, 16#28, 16#00, 16#00, 16#05, 16#00, - 16#00, 16#00, 16#03, 16#40, 16#10, 16#92, 16#00, 16#08, - 16#00, 16#02, 16#00, 16#00, 16#00, 16#01, 16#00, 16#01, - 16#00, 16#00, 16#0c, 16#40, 16#07, 16#00, 16#00, 16#0e, - 16#40, 16#02, 16#00, 16#00, 16#00, 16#7b, 16#00, 16#04, - 16#03, 16#12, 16#34, 16#56 - >>. - - -%% [MME -> eNB] HANDOVER REQUEST -handover_request(TLA, TEID) when is_binary(TLA), - is_integer(TEID) -> - << 16#00, 16#01, 16#00, 16#6f, 16#00, 16#00, 16#08, 16#00, - 16#00, 16#00, 16#03, 16#40, 16#10, 16#92, 16#00, 16#01, - 16#00, 16#01, 16#00, 16#00, 16#02, 16#40, 16#02, 16#04, - 16#20, 16#00, 16#42, 16#00, 16#0a, 16#18, 16#40, 16#00, - 16#00, 16#00, 16#60, 16#40, 16#00, 16#00, 16#00, 16#00, - 16#35, 16#00, 16#12, 16#00, 16#00, 16#1b, 16#00, 16#0d, - 16#00, 16#1f, - TLA/bytes, %% transportLayerAddress (IPv4) - TEID:32/big, %% GTP-TEID - 16#00, 16#05, 16#04, 16#00, 16#68, 16#00, - 16#04, 16#03, 16#12, 16#34, 16#56, 16#00, 16#6b, 16#00, - 16#05, 16#1c, 16#00, 16#0e, 16#00, 16#00, 16#00, 16#28, - 16#00, 16#21, 16#28, 16#e0, 16#3f, 16#02, 16#35, 16#f1, - 16#1e, 16#13, 16#68, 16#a8, 16#55, 16#04, 16#db, 16#fb, - 16#8f, 16#65, 16#2b, 16#8c, 16#c7, 16#1c, 16#7c, 16#87, - 16#cc, 16#f3, 16#f6, 16#4d, 16#4f, 16#84, 16#5e, 16#e1, - 16#d2, 16#fc, 16#c6 - >>. - - -%% [eNB -> MME] HANDOVER REQUEST ACKNOWLEDGE -handover_request_ack(TLA, TEID) when is_binary(TLA), - is_integer(TEID) -> - << 16#20, 16#01, 16#00, 16#2c, 16#00, 16#00, 16#04, 16#00, - 16#00, 16#40, 16#03, 16#40, 16#10, 16#92, 16#00, 16#08, - 16#40, 16#02, 16#00, 16#00, 16#00, 16#12, 16#40, 16#10, - 16#00, 16#00, 16#14, 16#40, 16#0b, 16#00, 16#01, 16#f0, - TLA/bytes, %% transportLayerAddress (IPv4) - TEID:32/big, %% GTP-TEID - 16#00, 16#7b, 16#00, 16#04, 16#03, 16#12, 16#34, 16#56 - >>. - - %% vim:set ts=4 sw=4 et: diff --git a/test/s1ap_samples.erl b/test/s1ap_samples.erl new file mode 100644 index 0000000..e3c3ac1 --- /dev/null +++ b/test/s1ap_samples.erl @@ -0,0 +1,336 @@ +-module(s1ap_samples). + +-export([s1_setup_req_pdu/0, + s1_setup_rsp_pdu/0, + e_rab_setup_req_pdu/2, + e_rab_setup_rsp_pdu/2, + e_rab_setup_rsp_fail_pdu/0, + e_rab_release_cmd_pdu/0, + e_rab_release_rsp_pdu/0, + e_rab_release_ind_pdu/0, + e_rab_modify_req_pdu/2, + e_rab_modify_rsp_pdu/0, + e_rab_modify_rsp_fail_pdu/0, + e_rab_modify_ind_pdu/2, + e_rab_modify_cnf_pdu/1, + initial_context_setup_req_pdu/2, + initial_context_setup_rsp_pdu/2, + ue_ctx_release_req_pdu/0, + ue_ctx_release_cmd_pdu/0, + ue_ctx_release_compl_pdu/0, + handover_required_pdu/0, + handover_command_pdu/0, + handover_request_pdu/2, + handover_request_ack_pdu/2]). + + +%% ------------------------------------------------------------------ +%% S1AP PDU samples +%% ------------------------------------------------------------------ + +%% S1 SETUP REQUEST +s1_setup_req_pdu() -> + << 16#00, 16#11, 16#00, 16#1a, 16#00, 16#00, 16#02, 16#00, + 16#3b, 16#40, 16#08, 16#00, 16#00, 16#f1, 16#10, 16#00, + 16#00, 16#00, 16#00, 16#00, 16#40, 16#00, 16#07, 16#00, + 16#0c, 16#0e, 16#40, 16#00, 16#f1, 16#10 + >>. + + +%% S1 SETUP RESPONSE +s1_setup_rsp_pdu() -> + << 16#20, 16#11, 16#00, 16#29, 16#00, 16#00, 16#03, 16#00, + 16#3d, 16#40, 16#0e, 16#05, 16#80, 16#6f, 16#70, 16#65, + 16#6e, 16#35, 16#67, 16#73, 16#2d, 16#6d, 16#6d, 16#65, + 16#30, 16#00, 16#69, 16#00, 16#0b, 16#00, 16#00, 16#00, + 16#f1, 16#10, 16#00, 16#00, 16#00, 16#02, 16#00, 16#01, + 16#00, 16#57, 16#40, 16#01, 16#ff + >>. + + +%% [eNB <- MME] E-RAB SETUP REQUEST +e_rab_setup_req_pdu(TLA, TEID) when is_binary(TLA), + is_integer(TEID) -> + << 16#00, 16#05, 16#00, 16#80, 16#9b, 16#00, 16#00, 16#03, + 16#00, 16#00, 16#00, 16#02, 16#00, 16#07, 16#00, 16#08, + 16#00, 16#02, 16#00, 16#09, 16#00, 16#10, 16#00, 16#80, + 16#87, 16#00, 16#00, 16#11, 16#00, 16#80, 16#81, 16#0c, + 16#00, 16#05, 16#04, 16#0f, 16#80, + TLA/bytes, %% transportLayerAddress (IPv4) + TEID:32/big, %% GTP-TEID + 16#72, 16#27, 16#c8, + 16#1a, 16#bc, 16#ec, 16#11, 16#62, 16#54, 16#c1, 16#01, + 16#05, 16#04, 16#03, 16#69, 16#6d, 16#73, 16#05, 16#01, + 16#c0, 16#a8, 16#65, 16#02, 16#5e, 16#02, 16#b3, 16#8c, + 16#58, 16#32, 16#27, 16#54, 16#80, 16#80, 16#21, 16#10, + 16#02, 16#00, 16#00, 16#10, 16#81, 16#06, 16#08, 16#08, + 16#08, 16#08, 16#83, 16#06, 16#08, 16#08, 16#04, 16#04, + 16#00, 16#0d, 16#04, 16#08, 16#08, 16#08, 16#08, 16#00, + 16#0d, 16#04, 16#08, 16#08, 16#04, 16#04, 16#00, 16#03, + 16#10, 16#20, 16#01, 16#48, 16#60, 16#48, 16#60, 16#00, + 16#00, 16#00, 16#00, 16#00, 16#00, 16#00, 16#00, 16#88, + 16#88, 16#00, 16#03, 16#10, 16#20, 16#01, 16#48, 16#60, + 16#48, 16#60, 16#00, 16#00, 16#00, 16#00, 16#00, 16#00, + 16#00, 16#00, 16#88, 16#44, 16#00, 16#0c, 16#04, 16#ac, + 16#16, 16#00, 16#15, 16#00, 16#10, 16#02, 16#05, 16#78 + >>. + + +%% [eNB -> MME] E-RAB SETUP RESPONSE +e_rab_setup_rsp_pdu(TLA, TEID) when is_binary(TLA), + is_integer(TEID) -> + << 16#20, 16#05, 16#00, 16#22, 16#00, 16#00, 16#03, 16#00, + 16#00, 16#40, 16#02, 16#00, 16#07, 16#00, 16#08, 16#40, + 16#02, 16#00, 16#09, 16#00, 16#1c, 16#40, 16#0f, 16#00, + 16#00, 16#27, 16#40, 16#0a, 16#0c, 16#1f, + TLA/bytes, %% transportLayerAddress (IPv4) + TEID:32/big %% GTP-TEID + >>. + + +%% [S1GW -> MME] E-RAB SETUP RESPONSE (failure) +%% Transport-cause: transport-resource-unavailable +e_rab_setup_rsp_fail_pdu() -> + << 16#20, 16#05, 16#00, 16#1a, 16#00, 16#00, 16#03, 16#00, + 16#00, 16#40, 16#02, 16#00, 16#07, 16#00, 16#08, 16#40, + 16#02, 16#00, 16#09, 16#00, 16#1d, 16#40, 16#07, 16#00, + 16#00, 16#23, 16#40, 16#02, 16#0c, 16#20 + >>. + + +%% [eNB <- MME] E-RAB RELEASE COMMAND +%% TODO: make E-RAB IDs configurable +e_rab_release_cmd_pdu() -> + << 16#00, 16#07, 16#00, 16#1a, 16#00, 16#00, 16#03, 16#00, + 16#00, 16#00, 16#02, 16#00, 16#07, 16#00, 16#08, 16#00, + 16#02, 16#00, 16#09, 16#00, 16#21, 16#40, 16#07, 16#00, + 16#00, 16#23, 16#40, 16#02, 16#0c, 16#40 + >>. + + +%% [eNB -> MME] E-RAB RELEASE RESPONSE +%% TODO: make E-RAB IDs configurable +e_rab_release_rsp_pdu() -> + << 16#20, 16#07, 16#00, 16#19, 16#00, 16#00, 16#03, 16#00, + 16#00, 16#00, 16#02, 16#00, 16#07, 16#00, 16#08, 16#00, + 16#02, 16#00, 16#09, 16#00, 16#45, 16#40, 16#06, 16#00, + 16#00, 16#0f, 16#40, 16#01, 16#0c + >>. + + +%% [eNB -> MME] E-RAB RELEASE INDICATION +%% TODO: make E-RAB IDs configurable +e_rab_release_ind_pdu() -> + << 16#00, 16#08, 16#00, 16#1a, 16#00, 16#00, 16#03, 16#00, + 16#00, 16#00, 16#02, 16#00, 16#07, 16#00, 16#08, 16#00, + 16#02, 16#00, 16#09, 16#00, 16#6e, 16#40, 16#07, 16#00, + 16#00, 16#23, 16#40, 16#02, 16#0c, 16#40 + >>. + + +%% [eNB <- MME] E-RAB MODIFY REQUEST +e_rab_modify_req_pdu(TLA, TEID) when is_binary(TLA), + is_integer(TEID) -> + << 16#00, 16#06, 16#00, 16#2d, 16#00, 16#00, 16#03, 16#00, + 16#00, 16#00, 16#02, 16#00, 16#07, 16#00, 16#08, 16#00, + 16#02, 16#00, 16#09, 16#00, 16#1e, 16#00, 16#1a, 16#00, + 16#00, 16#24, 16#00, 16#15, 16#4c, 16#00, 16#05, 16#04, + 16#00, 16#00, 16#00, 16#00, 16#b9, 16#00, 16#0a, 16#07, + 16#c0, + TLA/bytes, %% transportLayerAddress (IPv4) + TEID:32/big %% GTP-TEID + >>. + + +%% [eNB -> MME] E-RAB MODIFY RESPONSE (success) +e_rab_modify_rsp_pdu() -> + << 16#20, 16#06, 16#00, 16#19, 16#00, 16#00, 16#03, 16#00, + 16#00, 16#40, 16#02, 16#00, 16#07, 16#00, 16#08, 16#40, + 16#02, 16#00, 16#09, 16#00, 16#1f, 16#40, 16#06, 16#00, + 16#00, 16#25, 16#40, 16#01, 16#0c + >>. + + +%% [eNB -> MME] E-RAB MODIFY RESPONSE (failure) +e_rab_modify_rsp_fail_pdu() -> + << 16#20, 16#06, 16#00, 16#1a, 16#00, 16#00, 16#03, 16#00, + 16#00, 16#40, 16#02, 16#00, 16#07, 16#00, 16#08, 16#40, + 16#02, 16#00, 16#09, 16#00, 16#20, 16#40, 16#07, 16#00, + 16#00, 16#23, 16#40, 16#02, 16#0c, 16#40 + >>. + + +%% [eNB -> MME] E-RAB MODIFICATION INDICATION +e_rab_modify_ind_pdu(TLA, TEID) when is_binary(TLA), + is_integer(TEID) -> + << 16#00, 16#32, 16#00, 16#22, 16#00, 16#00, 16#03, 16#00, + 16#00, 16#00, 16#02, 16#00, 16#07, 16#00, 16#08, 16#00, + 16#02, 16#00, 16#09, 16#00, 16#c7, 16#00, 16#0f, 16#00, + 16#00, 16#c8, 16#00, 16#0a, 16#0c, 16#1f, + TLA/bytes, %% transportLayerAddress (IPv4) + TEID:32/big %% GTP-TEID + >>. + + +%% [eNB -> MME] E-RAB MODIFICATION CONFIRMATION +e_rab_modify_cnf_pdu(Res) -> + IEs = case Res of + modified -> + << 16#00, 16#cb, 16#40, 16#06, 16#00, + 16#00, 16#cc, 16#40, 16#01, 16#0c >>; + not_modified -> + %% cause: transport: transport-resource-unavailable (0) + << 16#00, 16#cd, 16#40, 16#07, 16#00, + 16#00, 16#23, 16#40, 16#02, 16#0c, 16#20 >>; + release -> + %% cause: transport: transport-resource-unavailable (0) + << 16#00, 16#d2, 16#40, 16#07, 16#00, + 16#00, 16#23, 16#40, 16#02, 16#0c, 16#20 >> + end, + << 16#20, 16#32, 16#00, (15 + byte_size(IEs)), + 16#00, 16#00, 16#03, 16#00, 16#00, 16#40, 16#02, 16#00, + 16#07, 16#00, 16#08, 16#40, 16#02, 16#00, 16#09, + IEs/bytes + >>. + + +%% [eNB <- MME] INITIAL CONTEXT SETUP REQUEST +initial_context_setup_req_pdu(TLA, TEID) when is_binary(TLA), + is_integer(TEID) -> + << 16#00, 16#09, 16#00, 16#81, 16#10, 16#00, 16#00, 16#07, + 16#00, 16#00, 16#00, 16#02, 16#00, 16#01, 16#00, 16#08, + 16#00, 16#02, 16#00, 16#01, 16#00, 16#42, 16#00, 16#0a, + 16#18, 16#3b, 16#9a, 16#ca, 16#00, 16#60, 16#3b, 16#9a, + 16#ca, 16#00, 16#00, 16#18, 16#00, 16#80, 16#b5, 16#00, + 16#00, 16#34, 16#00, 16#80, 16#af, 16#45, 16#00, 16#09, + 16#20, 16#0f, 16#80, + TLA/bytes, %% transportLayerAddress (IPv4) + TEID:32/big, %% GTP-TEID + 16#80, 16#9f, 16#27, 16#bd, 16#de, + 16#61, 16#4e, 16#02, 16#07, 16#42, 16#02, 16#29, 16#06, + 16#40, 16#32, 16#f8, 16#10, 16#00, 16#01, 16#00, 16#6e, + 16#52, 16#05, 16#c1, 16#01, 16#09, 16#09, 16#08, 16#69, + 16#6e, 16#74, 16#65, 16#72, 16#6e, 16#65, 16#74, 16#05, + 16#01, 16#c0, 16#a8, 16#64, 16#02, 16#5e, 16#06, 16#fe, + 16#fe, 16#fa, 16#fa, 16#02, 16#02, 16#58, 16#32, 16#27, + 16#4d, 16#80, 16#80, 16#21, 16#10, 16#02, 16#00, 16#00, + 16#10, 16#81, 16#06, 16#08, 16#08, 16#08, 16#08, 16#83, + 16#06, 16#08, 16#08, 16#04, 16#04, 16#00, 16#0d, 16#04, + 16#08, 16#08, 16#08, 16#08, 16#00, 16#0d, 16#04, 16#08, + 16#08, 16#04, 16#04, 16#00, 16#03, 16#10, 16#20, 16#01, + 16#48, 16#60, 16#48, 16#60, 16#00, 16#00, 16#00, 16#00, + 16#00, 16#00, 16#00, 16#00, 16#88, 16#88, 16#00, 16#03, + 16#10, 16#20, 16#01, 16#48, 16#60, 16#48, 16#60, 16#00, + 16#00, 16#00, 16#00, 16#00, 16#00, 16#00, 16#00, 16#88, + 16#44, 16#00, 16#10, 16#02, 16#05, 16#aa, 16#50, 16#0b, + 16#f6, 16#32, 16#f8, 16#10, 16#00, 16#02, 16#01, 16#c0, + 16#00, 16#02, 16#86, 16#13, 16#32, 16#f8, 16#10, 16#00, + 16#01, 16#23, 16#05, 16#f4, 16#04, 16#94, 16#25, 16#f8, + 16#64, 16#02, 16#01, 16#08, 16#00, 16#6b, 16#00, 16#05, + 16#1c, 16#00, 16#0e, 16#00, 16#00, 16#00, 16#49, 16#00, + 16#20, 16#57, 16#5d, 16#d3, 16#66, 16#69, 16#73, 16#4c, + 16#8c, 16#48, 16#42, 16#76, 16#5f, 16#fe, 16#f9, 16#bd, + 16#d5, 16#89, 16#08, 16#ae, 16#f6, 16#f4, 16#88, 16#62, + 16#22, 16#d7, 16#80, 16#fb, 16#36, 16#33, 16#d9, 16#9e, + 16#9f, 16#00, 16#c0, 16#40, 16#08, 16#35, 16#87, 16#61, + 16#10, 16#03, 16#ff, 16#ff, 16#74 + >>. + + +%% [eNB -> MME] INITIAL CONTEXT SETUP RESPONSE +initial_context_setup_rsp_pdu(TLA, TEID) when is_binary(TLA), + is_integer(TEID) -> + << 16#20, 16#09, 16#00, 16#22, 16#00, 16#00, 16#03, 16#00, + 16#00, 16#40, 16#02, 16#00, 16#01, 16#00, 16#08, 16#40, + 16#02, 16#00, 16#01, 16#00, 16#33, 16#40, 16#0f, 16#00, + 16#00, 16#32, 16#40, 16#0a, 16#0a, 16#1f, + TLA/bytes, %% transportLayerAddress (IPv4) + TEID:32/big %% GTP-TEID + >>. + + +%% [eNB -> MME] UE CONTEXT RELEASE REQUEST +ue_ctx_release_req_pdu() -> + << 16#00, 16#12, 16#40, 16#14, 16#00, 16#00, 16#03, 16#00, + 16#00, 16#00, 16#02, 16#00, 16#01, 16#00, 16#08, 16#00, + 16#02, 16#00, 16#01, 16#00, 16#02, 16#40, 16#01, 16#20 + >>. + + +%% [eNB <- MME] UE CONTEXT RELEASE COMMAND +ue_ctx_release_cmd_pdu() -> + << 16#00, 16#17, 16#00, 16#10, 16#00, 16#00, 16#02, 16#00, + 16#63, 16#00, 16#04, 16#00, 16#01, 16#00, 16#01, 16#00, + 16#02, 16#40, 16#01, 16#20 + >>. + + +%% [eNB -> MME] UE CONTEXT RELEASE COMPLETE +ue_ctx_release_compl_pdu() -> + << 16#20, 16#17, 16#00, 16#0f, 16#00, 16#00, 16#02, 16#00, + 16#00, 16#40, 16#02, 16#00, 16#01, 16#00, 16#08, 16#40, + 16#02, 16#00, 16#01 + >>. + + +%% [eNB -> MME] HANDOVER REQUIRED +handover_required_pdu() -> + << 16#00, 16#00, 16#00, 16#35, 16#00, 16#00, 16#06, 16#00, + 16#00, 16#00, 16#03, 16#40, 16#10, 16#92, 16#00, 16#08, + 16#00, 16#02, 16#00, 16#00, 16#00, 16#01, 16#00, 16#01, + 16#00, 16#00, 16#02, 16#40, 16#02, 16#04, 16#20, 16#00, + 16#04, 16#00, 16#0e, 16#00, 16#62, 16#f2, 16#10, 16#40, + 16#00, 16#00, 16#00, 16#00, 16#62, 16#f2, 16#10, 16#00, + 16#07, 16#00, 16#68, 16#00, 16#04, 16#03, 16#12, 16#34, + 16#56 + >>. + + +%% [MME -> eNB] HANDOVER COMMAND +handover_command_pdu() -> + << 16#20, 16#00, 16#00, 16#28, 16#00, 16#00, 16#05, 16#00, + 16#00, 16#00, 16#03, 16#40, 16#10, 16#92, 16#00, 16#08, + 16#00, 16#02, 16#00, 16#00, 16#00, 16#01, 16#00, 16#01, + 16#00, 16#00, 16#0c, 16#40, 16#07, 16#00, 16#00, 16#0e, + 16#40, 16#02, 16#00, 16#00, 16#00, 16#7b, 16#00, 16#04, + 16#03, 16#12, 16#34, 16#56 + >>. + + +%% [MME -> eNB] HANDOVER REQUEST +handover_request_pdu(TLA, TEID) when is_binary(TLA), + is_integer(TEID) -> + << 16#00, 16#01, 16#00, 16#6f, 16#00, 16#00, 16#08, 16#00, + 16#00, 16#00, 16#03, 16#40, 16#10, 16#92, 16#00, 16#01, + 16#00, 16#01, 16#00, 16#00, 16#02, 16#40, 16#02, 16#04, + 16#20, 16#00, 16#42, 16#00, 16#0a, 16#18, 16#40, 16#00, + 16#00, 16#00, 16#60, 16#40, 16#00, 16#00, 16#00, 16#00, + 16#35, 16#00, 16#12, 16#00, 16#00, 16#1b, 16#00, 16#0d, + 16#00, 16#1f, + TLA/bytes, %% transportLayerAddress (IPv4) + TEID:32/big, %% GTP-TEID + 16#00, 16#05, 16#04, 16#00, 16#68, 16#00, + 16#04, 16#03, 16#12, 16#34, 16#56, 16#00, 16#6b, 16#00, + 16#05, 16#1c, 16#00, 16#0e, 16#00, 16#00, 16#00, 16#28, + 16#00, 16#21, 16#28, 16#e0, 16#3f, 16#02, 16#35, 16#f1, + 16#1e, 16#13, 16#68, 16#a8, 16#55, 16#04, 16#db, 16#fb, + 16#8f, 16#65, 16#2b, 16#8c, 16#c7, 16#1c, 16#7c, 16#87, + 16#cc, 16#f3, 16#f6, 16#4d, 16#4f, 16#84, 16#5e, 16#e1, + 16#d2, 16#fc, 16#c6 + >>. + + +%% [eNB -> MME] HANDOVER REQUEST ACKNOWLEDGE +handover_request_ack_pdu(TLA, TEID) when is_binary(TLA), + is_integer(TEID) -> + << 16#20, 16#01, 16#00, 16#2c, 16#00, 16#00, 16#04, 16#00, + 16#00, 16#40, 16#03, 16#40, 16#10, 16#92, 16#00, 16#08, + 16#40, 16#02, 16#00, 16#00, 16#00, 16#12, 16#40, 16#10, + 16#00, 16#00, 16#14, 16#40, 16#0b, 16#00, 16#01, 16#f0, + TLA/bytes, %% transportLayerAddress (IPv4) + TEID:32/big, %% GTP-TEID + 16#00, 16#7b, 16#00, 16#04, 16#03, 16#12, 16#34, 16#56 + >>. + + +%% vim:set ts=4 sw=4 et: -- To view, visit https://gerrit.osmocom.org/c/erlang/osmo-s1gw/+/41611?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: merged Gerrit-Project: erlang/osmo-s1gw Gerrit-Branch: master Gerrit-Change-Id: I4b1d3f3a009009ab7620656a3b906e60481e47a1 Gerrit-Change-Number: 41611 Gerrit-PatchSet: 2 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: osmith <osmith(a)sysmocom.de> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de>

1 0

[M] Change in ...osmo-s1gw[master]: sctp_proxy: add _from_{enb,mme} variants of sctp_send/2
by fixeria 08 Dec '25

08 Dec '25

fixeria has posted comments on this change by fixeria. ( https://gerrit.osmocom.org/c/erlang/osmo-s1gw/+/41613?usp=email ) Change subject: sctp_proxy: add _from_{enb,mme} variants of sctp_send/2 ...................................................................... Patch Set 1: Code-Review+2 -- To view, visit https://gerrit.osmocom.org/c/erlang/osmo-s1gw/+/41613?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: erlang/osmo-s1gw Gerrit-Branch: master Gerrit-Change-Id: I388137e27ea5000f22e7a5b58d1ffcfd9caa1475 Gerrit-Change-Number: 41613 Gerrit-PatchSet: 1 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: osmith <osmith(a)sysmocom.de> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-Comment-Date: Mon, 08 Dec 2025 10:38:28 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes

1 0

[M] Change in ...osmo-s1gw[master]: enb_proxy: add inital MME pooling support
by osmith 08 Dec '25

08 Dec '25

Attention is currently required from: fixeria. osmith has posted comments on this change by fixeria. ( https://gerrit.osmocom.org/c/erlang/osmo-s1gw/+/41624?usp=email ) Change subject: enb_proxy: add inital MME pooling support ...................................................................... Patch Set 2: Code-Review+1 -- To view, visit https://gerrit.osmocom.org/c/erlang/osmo-s1gw/+/41624?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: erlang/osmo-s1gw Gerrit-Branch: master Gerrit-Change-Id: I83dc4a78c78a7b87e87f5ca9a941a168d6c1dc36 Gerrit-Change-Number: 41624 Gerrit-PatchSet: 2 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: osmith <osmith(a)sysmocom.de> Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Comment-Date: Mon, 08 Dec 2025 10:23:07 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes

1 0

[L] Change in ...osmo-s1gw[master]: [REST] Add MmeList, MmeAdd, MmeInfo, MmeDelete
by osmith 08 Dec '25

08 Dec '25

Attention is currently required from: fixeria, pespin. osmith has posted comments on this change by fixeria. ( https://gerrit.osmocom.org/c/erlang/osmo-s1gw/+/41282?usp=email ) Change subject: [REST] Add MmeList, MmeAdd, MmeInfo, MmeDelete ...................................................................... Patch Set 3: Code-Review+1 -- To view, visit https://gerrit.osmocom.org/c/erlang/osmo-s1gw/+/41282?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: erlang/osmo-s1gw Gerrit-Branch: master Gerrit-Change-Id: Iad249aed99face9e35fd19e0596cf2364ade4c77 Gerrit-Change-Number: 41282 Gerrit-PatchSet: 3 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: osmith <osmith(a)sysmocom.de> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Attention: pespin <pespin(a)sysmocom.de> Gerrit-Comment-Date: Mon, 08 Dec 2025 10:21:56 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes

1 0

[L] Change in ...osmo-s1gw[master]: mme_registry: the MME registry (pool) implementation
by osmith 08 Dec '25

08 Dec '25

Attention is currently required from: fixeria, pespin. osmith has posted comments on this change by fixeria. ( https://gerrit.osmocom.org/c/erlang/osmo-s1gw/+/41281?usp=email ) Change subject: mme_registry: the MME registry (pool) implementation ...................................................................... Patch Set 3: Code-Review+1 -- To view, visit https://gerrit.osmocom.org/c/erlang/osmo-s1gw/+/41281?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: erlang/osmo-s1gw Gerrit-Branch: master Gerrit-Change-Id: Id5480222439bf93eca2e994b291c619dff823b01 Gerrit-Change-Number: 41281 Gerrit-PatchSet: 3 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: osmith <osmith(a)sysmocom.de> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-Attention: pespin <pespin(a)sysmocom.de> Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Comment-Date: Mon, 08 Dec 2025 10:16:57 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes

1 0

[S] Change in ...osmo-s1gw[master]: Rename sctp_proxy -> enb_proxy
by osmith 08 Dec '25

08 Dec '25

Attention is currently required from: fixeria. osmith has posted comments on this change by fixeria. ( https://gerrit.osmocom.org/c/erlang/osmo-s1gw/+/41623?usp=email ) Change subject: Rename sctp_proxy -> enb_proxy ...................................................................... Patch Set 1: Code-Review+1 -- To view, visit https://gerrit.osmocom.org/c/erlang/osmo-s1gw/+/41623?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: erlang/osmo-s1gw Gerrit-Branch: master Gerrit-Change-Id: I8beaea9aa98dfa1c2e6f1d1c823b033892bd00cb Gerrit-Change-Number: 41623 Gerrit-PatchSet: 1 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: osmith <osmith(a)sysmocom.de> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Comment-Date: Mon, 08 Dec 2025 10:15:30 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes

1 0

[L] Change in ...osmo-s1gw[master]: s1ap_proxy: move S1 SETUP handling to sctp_proxy
by osmith 08 Dec '25

08 Dec '25

Attention is currently required from: fixeria. osmith has posted comments on this change by fixeria. ( https://gerrit.osmocom.org/c/erlang/osmo-s1gw/+/41622?usp=email ) Change subject: s1ap_proxy: move S1 SETUP handling to sctp_proxy ...................................................................... Patch Set 1: Code-Review+1 -- To view, visit https://gerrit.osmocom.org/c/erlang/osmo-s1gw/+/41622?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: erlang/osmo-s1gw Gerrit-Branch: master Gerrit-Change-Id: I9aa67732b418bcdf3f10b2db89a41dda26ee3d4e Gerrit-Change-Number: 41622 Gerrit-PatchSet: 1 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: osmith <osmith(a)sysmocom.de> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Comment-Date: Mon, 08 Dec 2025 10:15:05 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes

1 0

[M] Change in ...osmo-s1gw[master]: s1ap_utils: add API for S1AP PDU parsing
by osmith 08 Dec '25

08 Dec '25

Attention is currently required from: fixeria. osmith has posted comments on this change by fixeria. ( https://gerrit.osmocom.org/c/erlang/osmo-s1gw/+/41621?usp=email ) Change subject: s1ap_utils: add API for S1AP PDU parsing ...................................................................... Patch Set 1: Code-Review+1 -- To view, visit https://gerrit.osmocom.org/c/erlang/osmo-s1gw/+/41621?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: erlang/osmo-s1gw Gerrit-Branch: master Gerrit-Change-Id: I0aa3847d0f0ae65f13fa6bbfdbcd6ed188dcb04f Gerrit-Change-Number: 41621 Gerrit-PatchSet: 1 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: osmith <osmith(a)sysmocom.de> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Comment-Date: Mon, 08 Dec 2025 10:13:10 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes

1 0

[S] Change in ...osmo-s1gw[master]: s1ap_proxy: drop fetch_enb_info/1
by osmith 08 Dec '25

08 Dec '25

Attention is currently required from: fixeria. osmith has posted comments on this change by fixeria. ( https://gerrit.osmocom.org/c/erlang/osmo-s1gw/+/41620?usp=email ) Change subject: s1ap_proxy: drop fetch_enb_info/1 ...................................................................... Patch Set 1: Code-Review+1 -- To view, visit https://gerrit.osmocom.org/c/erlang/osmo-s1gw/+/41620?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: erlang/osmo-s1gw Gerrit-Branch: master Gerrit-Change-Id: I5a5f0dc1374f14fce14b33b3ea237eb083dd302c Gerrit-Change-Number: 41620 Gerrit-PatchSet: 1 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: osmith <osmith(a)sysmocom.de> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Comment-Date: Mon, 08 Dec 2025 10:11:41 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes

1 0

[M] Change in ...osmo-s1gw[master]: s1ap_proxy: signal GTP-U addr and eNB info to sctp_proxy
by osmith 08 Dec '25

08 Dec '25

Attention is currently required from: fixeria. osmith has posted comments on this change by fixeria. ( https://gerrit.osmocom.org/c/erlang/osmo-s1gw/+/41619?usp=email ) Change subject: s1ap_proxy: signal GTP-U addr and eNB info to sctp_proxy ...................................................................... Patch Set 1: Code-Review+1 -- To view, visit https://gerrit.osmocom.org/c/erlang/osmo-s1gw/+/41619?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: erlang/osmo-s1gw Gerrit-Branch: master Gerrit-Change-Id: I87e7d22a4bc5cb7816a167ac7dd29ea917594ce8 Gerrit-Change-Number: 41619 Gerrit-PatchSet: 1 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: osmith <osmith(a)sysmocom.de> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Comment-Date: Mon, 08 Dec 2025 10:11:22 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes

1 0