July 2023 - gerrit-log - lists.osmocom.org

[S] Change in osmo-ttcn3-hacks[master]: ASCI: Allow incoming VGCS/VBS connections at RAN_Emulation.ttcnpp

by laforge

laforge has submitted this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/33976 ) Change subject: ASCI: Allow incoming VGCS/VBS connections at RAN_Emulation.ttcnpp ...................................................................... ASCI: Allow incoming VGCS/VBS connections at RAN_Emulation.ttcnpp Similar to Handover Requests the RAN Emulation can accept new SCCP connections with VGCS/VBS Setup message and VGCS/VBS Assignment Request message. The point code for the incoming connection can be registered in the same way as for the Handover Request. In order to allow multiple connections with the same point code, the table entry in the ExpectTable must be released after receiving the message. VGCS/VBS calls have multiple connections to the same BSC. This patch does not break existing MSC handover tests. Related: OS#4854 Change-Id: I3fc0c5efe7d9f270804e7295aeb65cfe7898bd7e --- M library/RAN_Emulation.ttcnpp 1 file changed, 31 insertions(+), 0 deletions(-) Approvals: Jenkins Builder: Verified laforge: Looks good to me, approved diff --git a/library/RAN_Emulation.ttcnpp b/library/RAN_Emulation.ttcnpp index 2fba50a..99753da 100644 --- a/library/RAN_Emulation.ttcnpp +++ b/library/RAN_Emulation.ttcnpp @@ -1348,6 +1348,14 @@ handoverRequest := true; handoverRequestPointCode := bit2int(conn_ind.calledAddress.signPointCode); log("ExpectedCreateCallback handoverRequest ", handoverRequestPointCode); + } else if (ischosen(conn_ind.userData.pdu.bssmap.vGCS_VBSSetup)) { + handoverRequest := true; + handoverRequestPointCode := bit2int(conn_ind.calledAddress.signPointCode); + log("ExpectedCreateCallback VGCS/VBS Setup ", handoverRequestPointCode); + } else if (ischosen(conn_ind.userData.pdu.bssmap.vGCS_VBSAssignmentRequest)) { + handoverRequest := true; + handoverRequestPointCode := bit2int(conn_ind.calledAddress.signPointCode); + log("ExpectedCreateCallback VGCS/VBS Assignment ", handoverRequestPointCode); } else { setverdict(fail, "N-CONNECT.ind with L3 != COMPLETE L3 nor a Handover Request"); mtc.stop; @@ -1359,6 +1367,9 @@ " ==? ", handoverRequestPointCode); if (ExpectTable[i].handoverRequestPointCode == handoverRequestPointCode) { ret := ExpectTable[i].vc_conn; + /* release this entry to be used again */ + ExpectTable[i].handoverRequestPointCode := omit; + ExpectTable[i].vc_conn := null; log("Found Expect[", i, "] for handoverRequest handled at ", ret); return ret; } else { -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/33976 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: I3fc0c5efe7d9f270804e7295aeb65cfe7898bd7e Gerrit-Change-Number: 33976 Gerrit-PatchSet: 2 Gerrit-Owner: jolly <andreas(a)eversberg.eu> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-MessageType: merged

1 year, 10 months

1
0
0 0

[S] Change in osmo-ttcn3-hacks[master]: ASCI: Fix length indicator in template tr_BSSMAP_IE_GroupCallRef

by laforge

laforge has submitted this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/33974 ) ( 1 is the latest approved patch-set. No files were changed between the latest approved patch-set and the submitted one. )Change subject: ASCI: Fix length indicator in template tr_BSSMAP_IE_GroupCallRef ...................................................................... ASCI: Fix length indicator in template tr_BSSMAP_IE_GroupCallRef Any length must match, not just 0. Related: OS#4854 Change-Id: I34546609a80f714438abe985697dabc846c89701 --- M library/BSSMAP_Templates.ttcn 1 file changed, 13 insertions(+), 1 deletion(-) Approvals: laforge: Looks good to me, approved fixeria: Looks good to me, approved Jenkins Builder: Verified diff --git a/library/BSSMAP_Templates.ttcn b/library/BSSMAP_Templates.ttcn index 89efeb8..03479c1 100644 --- a/library/BSSMAP_Templates.ttcn +++ b/library/BSSMAP_Templates.ttcn @@ -2100,7 +2100,7 @@ template (present) BSSMAP_IE_GroupCallReference tr_BSSMAP_IE_GroupCallRef(template (present) GroupCallRef group_call_ref) :={ elementIdentifier := '37'O, - lengthIndicator := 0, // overwritten + lengthIndicator := ?, descrGroupbroadcastCallRef := group_call_ref } -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/33974 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: I34546609a80f714438abe985697dabc846c89701 Gerrit-Change-Number: 33974 Gerrit-PatchSet: 2 Gerrit-Owner: jolly <andreas(a)eversberg.eu> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-MessageType: merged

1 year, 10 months

1
0
0 0

[S] Change in osmo-ttcn3-hacks[master]: ASCI: Add missing codec list to *_BSSMAP_VGCS_VBS_AssignmentFail temp...

by laforge

laforge has submitted this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/33975 ) ( 1 is the latest approved patch-set. No files were changed between the latest approved patch-set and the submitted one. )Change subject: ASCI: Add missing codec list to *_BSSMAP_VGCS_VBS_AssignmentFail templates ...................................................................... ASCI: Add missing codec list to *_BSSMAP_VGCS_VBS_AssignmentFail templates Relates: OS#4854 Change-Id: I5f67c676035eaa9d61f7b123995770fd61eadaff --- M library/BSSMAP_Templates.ttcn 1 file changed, 14 insertions(+), 2 deletions(-) Approvals: laforge: Looks good to me, approved Jenkins Builder: Verified diff --git a/library/BSSMAP_Templates.ttcn b/library/BSSMAP_Templates.ttcn index 03479c1..a93fb02 100644 --- a/library/BSSMAP_Templates.ttcn +++ b/library/BSSMAP_Templates.ttcn @@ -2422,7 +2422,8 @@ cause := ts_BSSMAP_IE_Cause(cause), /* we only implement AoIP for now... */ circuitPool := omit, - circuitPoolList := omit + circuitPoolList := omit, + codecList := omit } } } @@ -2437,7 +2438,8 @@ cause := tr_BSSMAP_IE_Cause(cause), /* we only implement AoIP for now... */ circuitPool := omit, - circuitPoolList := omit + circuitPoolList := omit, + codecList := omit } } } -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/33975 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: I5f67c676035eaa9d61f7b123995770fd61eadaff Gerrit-Change-Number: 33975 Gerrit-PatchSet: 2 Gerrit-Owner: jolly <andreas(a)eversberg.eu> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-MessageType: merged

1 year, 10 months

1
0
0 0

[M] Change in osmo-ttcn3-hacks[master]: ASCI: Rename handoverRequest to n_connect in RAN_Emulation.ttcnpp

by laforge

laforge has submitted this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/33999 ) Change subject: ASCI: Rename handoverRequest to n_connect in RAN_Emulation.ttcnpp ...................................................................... ASCI: Rename handoverRequest to n_connect in RAN_Emulation.ttcnpp The expectation table is used to deliver new connections with Handover Request as well as with VGCS/VBS Setup and VGCS/VBS Assignment Request. "handoverRequest" is renamed to "n_connect". Related: OS#4854 Change-Id: I941c5db5235785841f3368ef908a409bbb12150e --- M library/RAN_Emulation.ttcnpp M msc/BSC_ConnectionHandler.ttcn M msc/MSC_Tests.ttcn 3 files changed, 51 insertions(+), 37 deletions(-) Approvals: Jenkins Builder: Verified pespin: Looks good to me, but someone else must approve laforge: Looks good to me, approved diff --git a/library/RAN_Emulation.ttcnpp b/library/RAN_Emulation.ttcnpp index 99753da..40929ee 100644 --- a/library/RAN_Emulation.ttcnpp +++ b/library/RAN_Emulation.ttcnpp @@ -1266,9 +1266,9 @@ PROC.reply(RAN_register:{l3_info, vc_hdlr}) to vc_hdlr; } - [] PROC.getcall(RAN_register_handoverRequest:{?,?}) -> param(targetPointCode, vc_hdlr) { + [] PROC.getcall(RAN_register_n_connect:{?,?}) -> param(targetPointCode, vc_hdlr) { f_create_expect(omit, vc_hdlr, targetPointCode); - PROC.reply(RAN_register_handoverRequest:{targetPointCode, vc_hdlr}) to vc_hdlr; + PROC.reply(RAN_register_n_connect:{targetPointCode, vc_hdlr}) to vc_hdlr; } [] PROC.getcall(RAN_register_sccp_cr_without_payload:{?}) -> param(vc_hdlr) { @@ -1305,7 +1305,7 @@ type record ExpectData { /* L3 payload based on which we can match it */ octetstring l3_payload optional, - integer handoverRequestPointCode optional, + integer n_connectPointCode optional, boolean sccp_cr_without_payload, /* component reference for this connection */ RAN_ConnHdlr vc_conn @@ -1313,7 +1313,7 @@ /* procedure based port to register for incoming connections */ signature RAN_register(in octetstring l3, in RAN_ConnHdlr hdlr); -signature RAN_register_handoverRequest(in integer targetPointCode, in RAN_ConnHdlr hdlr); +signature RAN_register_n_connect(in integer targetPointCode, in RAN_ConnHdlr hdlr); signature RAN_register_sccp_cr_without_payload(in RAN_ConnHdlr hdlr); /* procedure based port to register for incoming IMSI/TMSI */ @@ -1327,7 +1327,7 @@ signature RAN_continue_after_n_sd(N_Sd_Array last_n_sd, in RAN_ConnHdlr hdlr); type port RAN_PROC_PT procedure { - inout RAN_register, RAN_register_imsi, RAN_unregister_imsi, RAN_register_handoverRequest, + inout RAN_register, RAN_register_imsi, RAN_unregister_imsi, RAN_register_n_connect, RAN_register_sccp_cr_without_payload, RAN_last_n_sd, RAN_continue_after_n_sd; } with { extension "internal" }; @@ -1337,40 +1337,40 @@ runs on RAN_Emulation_CT return RAN_ConnHdlr { var RAN_ConnHdlr ret := null; var octetstring l3_info; - var boolean handoverRequest := false; - var integer handoverRequestPointCode; + var boolean n_connect := false; + var integer n_connectPointCode; var integer i; if (ischosen(conn_ind.userData.pdu.bssmap.completeLayer3Information)) { l3_info := conn_ind.userData.pdu.bssmap.completeLayer3Information.layer3Information.layer3info; log("ExpectedCreateCallback completeLayer3Information"); } else if (ischosen(conn_ind.userData.pdu.bssmap.handoverRequest)) { - handoverRequest := true; - handoverRequestPointCode := bit2int(conn_ind.calledAddress.signPointCode); - log("ExpectedCreateCallback handoverRequest ", handoverRequestPointCode); + n_connect := true; + n_connectPointCode := bit2int(conn_ind.calledAddress.signPointCode); + log("ExpectedCreateCallback handoverRequest ", n_connectPointCode); } else if (ischosen(conn_ind.userData.pdu.bssmap.vGCS_VBSSetup)) { - handoverRequest := true; - handoverRequestPointCode := bit2int(conn_ind.calledAddress.signPointCode); - log("ExpectedCreateCallback VGCS/VBS Setup ", handoverRequestPointCode); + n_connect := true; + n_connectPointCode := bit2int(conn_ind.calledAddress.signPointCode); + log("ExpectedCreateCallback VGCS/VBS Setup ", n_connectPointCode); } else if (ischosen(conn_ind.userData.pdu.bssmap.vGCS_VBSAssignmentRequest)) { - handoverRequest := true; - handoverRequestPointCode := bit2int(conn_ind.calledAddress.signPointCode); - log("ExpectedCreateCallback VGCS/VBS Assignment ", handoverRequestPointCode); + n_connect := true; + n_connectPointCode := bit2int(conn_ind.calledAddress.signPointCode); + log("ExpectedCreateCallback VGCS/VBS Assignment ", n_connectPointCode); } else { - setverdict(fail, "N-CONNECT.ind with L3 != COMPLETE L3 nor a Handover Request"); + setverdict(fail, "N-CONNECT.ind with L3 != COMPLETE L3 nor a new BSS connection"); mtc.stop; } for (i := 0; i < sizeof(ExpectTable); i:= i+1) { - if (handoverRequest) { - log("ExpectTable[", i, "].handoverRequestPointCode = ", ExpectTable[i].handoverRequestPointCode, - " ==? ", handoverRequestPointCode); - if (ExpectTable[i].handoverRequestPointCode == handoverRequestPointCode) { + if (n_connect) { + log("ExpectTable[", i, "].n_connectPointCode = ", ExpectTable[i].n_connectPointCode, + " ==? ", n_connectPointCode); + if (ExpectTable[i].n_connectPointCode == n_connectPointCode) { ret := ExpectTable[i].vc_conn; /* release this entry to be used again */ - ExpectTable[i].handoverRequestPointCode := omit; + ExpectTable[i].n_connectPointCode := omit; ExpectTable[i].vc_conn := null; - log("Found Expect[", i, "] for handoverRequest handled at ", ret); + log("Found Expect[", i, "] for N-CONNECT handled at ", ret); return ret; } else { continue; @@ -1436,25 +1436,25 @@ #endif private function f_create_expect(template octetstring l3, RAN_ConnHdlr hdlr, - template integer handoverRequestPointCode := omit) + template integer n_connectPointCode := omit) runs on RAN_Emulation_CT { var integer i; - log("f_create_expect(l3 := ", l3, ", handoverRequest := ", handoverRequestPointCode); + log("f_create_expect(l3 := ", l3, ", n_connectPointCode := ", n_connectPointCode); for (i := 0; i < sizeof(ExpectTable); i := i+1) { if (not ispresent(ExpectTable[i].l3_payload) and not ExpectTable[i].sccp_cr_without_payload - and not ispresent(ExpectTable[i].handoverRequestPointCode)) { + and not ispresent(ExpectTable[i].n_connectPointCode)) { if (ispresent(l3)) { ExpectTable[i].l3_payload := valueof(l3); } else { ExpectTable[i].sccp_cr_without_payload := true; } - if (ispresent(handoverRequestPointCode)) { - ExpectTable[i].handoverRequestPointCode := valueof(handoverRequestPointCode); + if (ispresent(n_connectPointCode)) { + ExpectTable[i].n_connectPointCode := valueof(n_connectPointCode); } ExpectTable[i].vc_conn := hdlr; - if (ispresent(handoverRequestPointCode)) { - log("Created Expect[", i, "] for handoverRequest to be handled at ", hdlr); + if (ispresent(n_connectPointCode)) { + log("Created Expect[", i, "] for N-CONNECT to be handled at ", hdlr); } else { log("Created Expect[", i, "] for ", l3, " to be handled at ", hdlr); } @@ -1499,7 +1499,7 @@ runs on RAN_Emulation_CT { for (var integer i := 0; i < sizeof(ExpectTable); i := i+1) { ExpectTable[i].l3_payload := omit; - ExpectTable[i].handoverRequestPointCode := omit; + ExpectTable[i].n_connectPointCode := omit; ExpectTable[i].sccp_cr_without_payload := false; } } diff --git a/msc/BSC_ConnectionHandler.ttcn b/msc/BSC_ConnectionHandler.ttcn index 64e2aff..d4723e5 100644 --- a/msc/BSC_ConnectionHandler.ttcn +++ b/msc/BSC_ConnectionHandler.ttcn @@ -1969,9 +1969,9 @@ } } -function f_create_bssmap_exp_handoverRequest(integer targetPointCode) runs on BSC_ConnHdlr { - BSSAP_PROC.call(RAN_register_handoverRequest:{targetPointCode, self}) { - [] BSSAP_PROC.getreply(RAN_register_handoverRequest:{?, ?}) {}; +function f_create_bssmap_exp_n_connect(integer targetPointCode) runs on BSC_ConnHdlr { + BSSAP_PROC.call(RAN_register_n_connect:{targetPointCode, self}) { + [] BSSAP_PROC.getreply(RAN_register_n_connect:{?, ?}) {}; } } diff --git a/msc/MSC_Tests.ttcn b/msc/MSC_Tests.ttcn index 75b7688..d955f02 100644 --- a/msc/MSC_Tests.ttcn +++ b/msc/MSC_Tests.ttcn @@ -5819,7 +5819,7 @@ /* Ok, that went well, now the other BSC is handovering back here -- * from now on this here is the new BSS. */ - f_create_bssmap_exp_handoverRequest(193); + f_create_bssmap_exp_n_connect(193); var template BSSMAP_IE_EncryptionInformation encryptionInformation; var template BSSMAP_IE_ChosenEncryptionAlgorithm chosenEncryptionAlgorithm; @@ -5883,7 +5883,7 @@ bss_rtp_ip := "1.2.3.4"; } f_init_handler(pars); - f_create_bssmap_exp_handoverRequest(194); + f_create_bssmap_exp_n_connect(194); var template BSSMAP_IE_EncryptionInformation encryptionInformation; var template BSSMAP_IE_ChosenEncryptionAlgorithm chosenEncryptionAlgorithm; @@ -6218,7 +6218,7 @@ /* inter-MSC handover back to the first MSC */ - f_create_bssmap_exp_handoverRequest(193); + f_create_bssmap_exp_n_connect(193); cil := { cIl_CGI := { ts_BSSMAP_CI_CGI('262'H, '42'H, 23, 42) } }; /* old BSS sends Handover Required, via inter-MSC E link: like -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/33999 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: I941c5db5235785841f3368ef908a409bbb12150e Gerrit-Change-Number: 33999 Gerrit-PatchSet: 1 Gerrit-Owner: jolly <andreas(a)eversberg.eu> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: merged

1 year, 10 months

1
0
0 0

[S] Change in osmo-ttcn3-hacks[master]: ASCI: Add GCC and BCC service requests to BSC_ConnectionHandler.ttcn

by laforge

laforge has submitted this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/33978 ) ( 1 is the latest approved patch-set. No files were changed between the latest approved patch-set and the submitted one. )Change subject: ASCI: Add GCC and BCC service requests to BSC_ConnectionHandler.ttcn ...................................................................... ASCI: Add GCC and BCC service requests to BSC_ConnectionHandler.ttcn Related: OS#4854 Change-Id: Ic4875fde45dfc8d6928a48c0f6edc91d994bfa97 --- M msc/BSC_ConnectionHandler.ttcn 1 file changed, 19 insertions(+), 1 deletion(-) Approvals: laforge: Looks good to me, but someone else must approve pespin: Looks good to me, approved Jenkins Builder: Verified diff --git a/msc/BSC_ConnectionHandler.ttcn b/msc/BSC_ConnectionHandler.ttcn index d4723e5..170694a 100644 --- a/msc/BSC_ConnectionHandler.ttcn +++ b/msc/BSC_ConnectionHandler.ttcn @@ -376,7 +376,9 @@ EST_TYPE_PAG_RESP, EST_TYPE_MO_SMS, EST_TYPE_SS_ACT, - EST_TYPE_MO_CSD + EST_TYPE_MO_CSD, + EST_TYPE_VGCS, + EST_TYPE_VBS }; /* helper function to fully establish a dedicated channel */ @@ -411,6 +413,12 @@ case (EST_TYPE_SS_ACT) { l3_info := valueof(ts_CM_SERV_REQ(CM_TYPE_SS_ACT, mi)); } + case (EST_TYPE_VGCS) { + l3_info := valueof(ts_CM_SERV_REQ(CM_TYPE_VGCS, mi)); + } + case (EST_TYPE_VBS) { + l3_info := valueof(ts_CM_SERV_REQ(CM_TYPE_VBS, mi)); + } } /* Send BSSAP_Conn_Req with COMPL L3 INFO to MSC */ -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/33978 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: Ic4875fde45dfc8d6928a48c0f6edc91d994bfa97 Gerrit-Change-Number: 33978 Gerrit-PatchSet: 2 Gerrit-Owner: jolly <andreas(a)eversberg.eu> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: merged

1 year, 10 months

1
0
0 0

[M] Change in osmo-ttcn3-hacks[master]: ASCI: Rename handoverRequest to n_connect in RAN_Emulation.ttcnpp

by laforge

Attention is currently required from: jolly. laforge has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/33999 ) Change subject: ASCI: Rename handoverRequest to n_connect in RAN_Emulation.ttcnpp ...................................................................... Patch Set 1: Code-Review+2 -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/33999 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: I941c5db5235785841f3368ef908a409bbb12150e Gerrit-Change-Number: 33999 Gerrit-PatchSet: 1 Gerrit-Owner: jolly <andreas(a)eversberg.eu> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-Attention: jolly <andreas(a)eversberg.eu> Gerrit-Comment-Date: Sat, 29 Jul 2023 08:48:17 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

1 year, 10 months

1
0
0 0

[S] Change in osmo-ttcn3-hacks[master]: ASCI: Allow incoming VGCS/VBS connections at RAN_Emulation.ttcnpp

by laforge

Attention is currently required from: jolly. laforge has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/33976 ) Change subject: ASCI: Allow incoming VGCS/VBS connections at RAN_Emulation.ttcnpp ...................................................................... Patch Set 2: Code-Review+2 -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/33976 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: I3fc0c5efe7d9f270804e7295aeb65cfe7898bd7e Gerrit-Change-Number: 33976 Gerrit-PatchSet: 2 Gerrit-Owner: jolly <andreas(a)eversberg.eu> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Attention: jolly <andreas(a)eversberg.eu> Gerrit-Comment-Date: Sat, 29 Jul 2023 08:47:38 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

1 year, 10 months

1
0
0 0

[M] Change in osmo-ttcn3-hacks[master]: ASCI: Add templates to send and receive GCC/BCC call control messages

by laforge

Attention is currently required from: jolly. laforge has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/33973 ) Change subject: ASCI: Add templates to send and receive GCC/BCC call control messages ...................................................................... Patch Set 2: Code-Review+2 -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/33973 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: I9ff5587a9fda1ea756891fc39a20cfd05924f628 Gerrit-Change-Number: 33973 Gerrit-PatchSet: 2 Gerrit-Owner: jolly <andreas(a)eversberg.eu> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-Attention: jolly <andreas(a)eversberg.eu> Gerrit-Comment-Date: Sat, 29 Jul 2023 08:47:00 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

1 year, 10 months

1
0
0 0

[S] Change in osmo-msc[master]: ASCI: Add missing transaction ID to SET PARAMETER message

by laforge

laforge has submitted this change. ( https://gerrit.osmocom.org/c/osmo-msc/+/33966 ) ( 1 is the latest approved patch-set. No files were changed between the latest approved patch-set and the submitted one. )Change subject: ASCI: Add missing transaction ID to SET PARAMETER message ...................................................................... ASCI: Add missing transaction ID to SET PARAMETER message Change-Id: I1b692cee894826a306885253a53a351f952d52dc Related: OS#4854 --- M src/libmsc/msc_vgcs.c 1 file changed, 12 insertions(+), 1 deletion(-) Approvals: laforge: Looks good to me, but someone else must approve pespin: Looks good to me, approved Jenkins Builder: Verified diff --git a/src/libmsc/msc_vgcs.c b/src/libmsc/msc_vgcs.c index e713ba5..f3867fe 100644 --- a/src/libmsc/msc_vgcs.c +++ b/src/libmsc/msc_vgcs.c @@ -890,7 +890,8 @@ uint8_t pdisc = (trans->type == TRANS_GCC) ? GSM48_PDISC_GROUP_CC : GSM48_PDISC_BCAST_CC; int rc; - rc = gsm44068_tx_set_parameter(trans, pdisc, !trans->gcc.mute_talker, 1, 1, trans->gcc.uplink_originator); + rc = gsm44068_tx_set_parameter(trans, pdisc | (trans->transaction_id << 4), + !trans->gcc.mute_talker, 1, 1, trans->gcc.uplink_originator); if (rc < 0) LOG_GCC(trans, LOGL_ERROR, "Failed to send SET PARAMETER towards MS.\n"); return rc; -- To view, visit https://gerrit.osmocom.org/c/osmo-msc/+/33966 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-msc Gerrit-Branch: master Gerrit-Change-Id: I1b692cee894826a306885253a53a351f952d52dc Gerrit-Change-Number: 33966 Gerrit-PatchSet: 2 Gerrit-Owner: jolly <andreas(a)eversberg.eu> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: merged

1 year, 10 months

1
0
0 0

[S] Change in osmo-msc[master]: ASCI: Add debugging and error logging to VGCS/VBS call control

by laforge

laforge has submitted this change. ( https://gerrit.osmocom.org/c/osmo-msc/+/33965 ) Change subject: ASCI: Add debugging and error logging to VGCS/VBS call control ...................................................................... ASCI: Add debugging and error logging to VGCS/VBS call control Change-Id: I3fbce71e47e9670f58e46e7c2a0f26a1bbc1a46e Related: OS#4854 --- M src/libmsc/msc_vgcs.c 1 file changed, 16 insertions(+), 0 deletions(-) Approvals: Jenkins Builder: Verified pespin: Looks good to me, but someone else must approve laforge: Looks good to me, approved diff --git a/src/libmsc/msc_vgcs.c b/src/libmsc/msc_vgcs.c index f50753b..e713ba5 100644 --- a/src/libmsc/msc_vgcs.c +++ b/src/libmsc/msc_vgcs.c @@ -636,6 +636,7 @@ } /* Create BSS list structures. */ + LOG_GCC(trans, LOGL_DEBUG, "Creating BSS list structure with cell list structures.\n"); llist_for_each_entry(b, &gcr->bss_list, list) { LOG_GCC(trans, LOGL_DEBUG, " -> BSS with PC %s.\n", osmo_ss7_pointcode_print(NULL, b->pc)); /* Resolve ran_peer. */ @@ -668,12 +669,14 @@ /* Create ran connection. */ bss->conn = ran_conn_create_outgoing(rp); if (!bss->conn) { + LOG_GCC(trans, LOGL_ERROR, "Failed to create RAN connection.\n"); osmo_fsm_inst_free(bss->fi); continue; } bss->conn->vgcs.bss = bss; /* Create cell list structures. */ llist_for_each_entry(c, &b->cell_list, list) { + LOG_GCC(trans, LOGL_DEBUG, " -> Cell ID %d.\n", c->cell_id); /* Create state machine. */ fi = osmo_fsm_inst_alloc(&vgcs_cell_fsm, net, NULL, LOGL_DEBUG, NULL); if (!fi) { @@ -698,6 +701,7 @@ /* Create ran connection. */ cell->conn = ran_conn_create_outgoing(rp); if (!cell->conn) { + LOG_GCC(trans, LOGL_ERROR, "Failed to create RAN connection.\n"); osmo_fsm_inst_free(cell->fi); continue; } @@ -710,6 +714,7 @@ } /* No cell? */ if (llist_empty(&bss->cell_list)) { + LOG_GCC(trans, LOGL_DEBUG, " -> No Cell in this BSS.\n"); osmo_fsm_inst_free(bss->fi); break; } @@ -721,6 +726,7 @@ /* No BSS? */ if (llist_empty(&trans->gcc.bss_list)) { /* Also destroy MGW, because this list is empty too! */ + LOG_GCC(trans, LOGL_NOTICE, "No BSS found, please check your VTY configuration and add cells.\n"); goto err_mgw; } return 0; -- To view, visit https://gerrit.osmocom.org/c/osmo-msc/+/33965 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-msc Gerrit-Branch: master Gerrit-Change-Id: I3fbce71e47e9670f58e46e7c2a0f26a1bbc1a46e Gerrit-Change-Number: 33965 Gerrit-PatchSet: 2 Gerrit-Owner: jolly <andreas(a)eversberg.eu> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: merged

1 year, 10 months

1
0
0 0

2025

2024

2023

2022

gerrit-log July 2023